d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f2f66ef6d2
freebsd-dev/sys/dev/mpr/mpr.c
Warner Losh 0d87f3c702 Remove support for all pre FreeBSD 11.0 versions from mpr and mps. 
Remove a number of workarounds for older versions of FreeBSD. FreeBSD stable/10
was branched over 6 years ago. All of these changes date from about that time or
earlier. These workarounds are extensive and get in the way of understanding
the current flow in the driver.
2020-02-26 19:15:08 +00:00

3996 lines
118 KiB
C
Raw Blame History

/*-
* Copyright (c) 2009 Yahoo! Inc.
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2016 Avago Technologies
* Copyright 2000-2020 Broadcom Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/* Communications core for Avago Technologies (LSI) MPT3 */
/* TODO Move headers to mprvar */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/selinfo.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/bio.h>
#include <sys/malloc.h>
#include <sys/uio.h>
#include <sys/sysctl.h>
#include <sys/smp.h>
#include <sys/queue.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/endian.h>
#include <sys/eventhandler.h>
#include <sys/sbuf.h>
#include <sys/priv.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <sys/proc.h>
#include <dev/pci/pcivar.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/scsi/scsi_all.h>
#include <dev/mpr/mpi/mpi2_type.h>
#include <dev/mpr/mpi/mpi2.h>
#include <dev/mpr/mpi/mpi2_ioc.h>
#include <dev/mpr/mpi/mpi2_sas.h>
#include <dev/mpr/mpi/mpi2_pci.h>
#include <dev/mpr/mpi/mpi2_cnfg.h>
#include <dev/mpr/mpi/mpi2_init.h>
#include <dev/mpr/mpi/mpi2_tool.h>
#include <dev/mpr/mpr_ioctl.h>
#include <dev/mpr/mprvar.h>
#include <dev/mpr/mpr_table.h>
#include <dev/mpr/mpr_sas.h>
static int mpr_diag_reset(struct mpr_softc *sc, int sleep_flag);
static int mpr_init_queues(struct mpr_softc *sc);
static void mpr_resize_queues(struct mpr_softc *sc);
static int mpr_message_unit_reset(struct mpr_softc *sc, int sleep_flag);
static int mpr_transition_operational(struct mpr_softc *sc);
static int mpr_iocfacts_allocate(struct mpr_softc *sc, uint8_t attaching);
static void mpr_iocfacts_free(struct mpr_softc *sc);
static void mpr_startup(void *arg);
static int mpr_send_iocinit(struct mpr_softc *sc);
static int mpr_alloc_queues(struct mpr_softc *sc);
static int mpr_alloc_hw_queues(struct mpr_softc *sc);
static int mpr_alloc_replies(struct mpr_softc *sc);
static int mpr_alloc_requests(struct mpr_softc *sc);
static int mpr_alloc_nvme_prp_pages(struct mpr_softc *sc);
static int mpr_attach_log(struct mpr_softc *sc);
static __inline void mpr_complete_command(struct mpr_softc *sc,
struct mpr_command *cm);
static void mpr_dispatch_event(struct mpr_softc *sc, uintptr_t data,
MPI2_EVENT_NOTIFICATION_REPLY *reply);
static void mpr_config_complete(struct mpr_softc *sc, struct mpr_command *cm);
static void mpr_periodic(void *);
static int mpr_reregister_events(struct mpr_softc *sc);
static void mpr_enqueue_request(struct mpr_softc *sc, struct mpr_command *cm);
static int mpr_get_iocfacts(struct mpr_softc *sc, MPI2_IOC_FACTS_REPLY *facts);
static int mpr_wait_db_ack(struct mpr_softc *sc, int timeout, int sleep_flag);
static int mpr_debug_sysctl(SYSCTL_HANDLER_ARGS);
static int mpr_dump_reqs(SYSCTL_HANDLER_ARGS);
static void mpr_parse_debug(struct mpr_softc *sc, char *list);
SYSCTL_NODE(_hw, OID_AUTO, mpr, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
"MPR Driver Parameters");
MALLOC_DEFINE(M_MPR, "mpr", "mpr driver memory");
/*
* Do a "Diagnostic Reset" aka a hard reset. This should get the chip out of
* any state and back to its initialization state machine.
*/
static char mpt2_reset_magic[] = { 0x00, 0x0f, 0x04, 0x0b, 0x02, 0x07, 0x0d };
/*
* Added this union to smoothly convert le64toh cm->cm_desc.Words.
* Compiler only supports uint64_t to be passed as an argument.
* Otherwise it will throw this error:
* "aggregate value used where an integer was expected"
*/
typedef union _reply_descriptor {
u64 word;
struct {
u32 low;
u32 high;
} u;
} reply_descriptor, request_descriptor;
/* Rate limit chain-fail messages to 1 per minute */
static struct timeval mpr_chainfail_interval = { 60, 0 };
/*
* sleep_flag can be either CAN_SLEEP or NO_SLEEP.
* If this function is called from process context, it can sleep
* and there is no harm to sleep, in case if this fuction is called
* from Interrupt handler, we can not sleep and need NO_SLEEP flag set.
* based on sleep flags driver will call either msleep, pause or DELAY.
* msleep and pause are of same variant, but pause is used when mpr_mtx
* is not hold by driver.
*/
static int
mpr_diag_reset(struct mpr_softc *sc,int sleep_flag)
{
uint32_t reg;
int i, error, tries = 0;
uint8_t first_wait_done = FALSE;
mpr_dprint(sc, MPR_INIT, "%s entered\n", __func__);
/* Clear any pending interrupts */
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
/*
* Force NO_SLEEP for threads prohibited to sleep
* e.a Thread from interrupt handler are prohibited to sleep.
*/
if (curthread->td_no_sleeping)
sleep_flag = NO_SLEEP;
mpr_dprint(sc, MPR_INIT, "sequence start, sleep_flag=%d\n", sleep_flag);
/* Push the magic sequence */
error = ETIMEDOUT;
while (tries++ < 20) {
for (i = 0; i < sizeof(mpt2_reset_magic); i++)
mpr_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET,
mpt2_reset_magic[i]);
/* wait 100 msec */
if (mtx_owned(&sc->mpr_mtx) && sleep_flag == CAN_SLEEP)
msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0,
"mprdiag", hz/10);
else if (sleep_flag == CAN_SLEEP)
pause("mprdiag", hz/10);
else
DELAY(100 * 1000);
reg = mpr_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET);
if (reg & MPI2_DIAG_DIAG_WRITE_ENABLE) {
error = 0;
break;
}
}
if (error) {
mpr_dprint(sc, MPR_INIT, "sequence failed, error=%d, exit\n",
error);
return (error);
}
/* Send the actual reset. XXX need to refresh the reg? */
reg |= MPI2_DIAG_RESET_ADAPTER;
mpr_dprint(sc, MPR_INIT, "sequence success, sending reset, reg= 0x%x\n",
reg);
mpr_regwrite(sc, MPI2_HOST_DIAGNOSTIC_OFFSET, reg);
/* Wait up to 300 seconds in 50ms intervals */
error = ETIMEDOUT;
for (i = 0; i < 6000; i++) {
/*
* Wait 50 msec. If this is the first time through, wait 256
* msec to satisfy Diag Reset timing requirements.
*/
if (first_wait_done) {
if (mtx_owned(&sc->mpr_mtx) && sleep_flag == CAN_SLEEP)
msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0,
"mprdiag", hz/20);
else if (sleep_flag == CAN_SLEEP)
pause("mprdiag", hz/20);
else
DELAY(50 * 1000);
} else {
DELAY(256 * 1000);
first_wait_done = TRUE;
}
/*
* Check for the RESET_ADAPTER bit to be cleared first, then
* wait for the RESET state to be cleared, which takes a little
* longer.
*/
reg = mpr_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET);
if (reg & MPI2_DIAG_RESET_ADAPTER) {
continue;
}
reg = mpr_regread(sc, MPI2_DOORBELL_OFFSET);
if ((reg & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_RESET) {
error = 0;
break;
}
}
if (error) {
mpr_dprint(sc, MPR_INIT, "reset failed, error= %d, exit\n",
error);
return (error);
}
mpr_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, 0x0);
mpr_dprint(sc, MPR_INIT, "diag reset success, exit\n");
return (0);
}
static int
mpr_message_unit_reset(struct mpr_softc *sc, int sleep_flag)
{
int error;
MPR_FUNCTRACE(sc);
mpr_dprint(sc, MPR_INIT, "%s entered\n", __func__);
error = 0;
mpr_regwrite(sc, MPI2_DOORBELL_OFFSET,
MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET <<
MPI2_DOORBELL_FUNCTION_SHIFT);
if (mpr_wait_db_ack(sc, 5, sleep_flag) != 0) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT,
"Doorbell handshake failed\n");
error = ETIMEDOUT;
}
mpr_dprint(sc, MPR_INIT, "%s exit\n", __func__);
return (error);
}
static int
mpr_transition_ready(struct mpr_softc *sc)
{
uint32_t reg, state;
int error, tries = 0;
int sleep_flags;
MPR_FUNCTRACE(sc);
/* If we are in attach call, do not sleep */
sleep_flags = (sc->mpr_flags & MPR_FLAGS_ATTACH_DONE)
? CAN_SLEEP : NO_SLEEP;
error = 0;
mpr_dprint(sc, MPR_INIT, "%s entered, sleep_flags= %d\n",
__func__, sleep_flags);
while (tries++ < 1200) {
reg = mpr_regread(sc, MPI2_DOORBELL_OFFSET);
mpr_dprint(sc, MPR_INIT, " Doorbell= 0x%x\n", reg);
/*
* Ensure the IOC is ready to talk. If it's not, try
* resetting it.
*/
if (reg & MPI2_DOORBELL_USED) {
mpr_dprint(sc, MPR_INIT, " Not ready, sending diag "
"reset\n");
mpr_diag_reset(sc, sleep_flags);
DELAY(50000);
continue;
}
/* Is the adapter owned by another peer? */
if ((reg & MPI2_DOORBELL_WHO_INIT_MASK) ==
(MPI2_WHOINIT_PCI_PEER << MPI2_DOORBELL_WHO_INIT_SHIFT)) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT, "IOC is under the "
"control of another peer host, aborting "
"initialization.\n");
error = ENXIO;
break;
}
state = reg & MPI2_IOC_STATE_MASK;
if (state == MPI2_IOC_STATE_READY) {
/* Ready to go! */
error = 0;
break;
} else if (state == MPI2_IOC_STATE_FAULT) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT, "IOC in fault "
"state 0x%x, resetting\n",
state & MPI2_DOORBELL_FAULT_CODE_MASK);
mpr_diag_reset(sc, sleep_flags);
} else if (state == MPI2_IOC_STATE_OPERATIONAL) {
/* Need to take ownership */
mpr_message_unit_reset(sc, sleep_flags);
} else if (state == MPI2_IOC_STATE_RESET) {
/* Wait a bit, IOC might be in transition */
mpr_dprint(sc, MPR_INIT|MPR_FAULT,
"IOC in unexpected reset state\n");
} else {
mpr_dprint(sc, MPR_INIT|MPR_FAULT,
"IOC in unknown state 0x%x\n", state);
error = EINVAL;
break;
}
/* Wait 50ms for things to settle down. */
DELAY(50000);
}
if (error)
mpr_dprint(sc, MPR_INIT|MPR_FAULT,
"Cannot transition IOC to ready\n");
mpr_dprint(sc, MPR_INIT, "%s exit\n", __func__);
return (error);
}
static int
mpr_transition_operational(struct mpr_softc *sc)
{
uint32_t reg, state;
int error;
MPR_FUNCTRACE(sc);
error = 0;
reg = mpr_regread(sc, MPI2_DOORBELL_OFFSET);
mpr_dprint(sc, MPR_INIT, "%s entered, Doorbell= 0x%x\n", __func__, reg);
state = reg & MPI2_IOC_STATE_MASK;
if (state != MPI2_IOC_STATE_READY) {
mpr_dprint(sc, MPR_INIT, "IOC not ready\n");
if ((error = mpr_transition_ready(sc)) != 0) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT,
"failed to transition ready, exit\n");
return (error);
}
}
error = mpr_send_iocinit(sc);
mpr_dprint(sc, MPR_INIT, "%s exit\n", __func__);
return (error);
}
static void
mpr_resize_queues(struct mpr_softc *sc)
{
u_int reqcr, prireqcr, maxio, sges_per_frame, chain_seg_size;
/*
* Size the queues. Since the reply queues always need one free
* entry, we'll deduct one reply message here. The LSI documents
* suggest instead to add a count to the request queue, but I think
* that it's better to deduct from reply queue.
*/
prireqcr = MAX(1, sc->max_prireqframes);
prireqcr = MIN(prireqcr, sc->facts->HighPriorityCredit);
reqcr = MAX(2, sc->max_reqframes);
reqcr = MIN(reqcr, sc->facts->RequestCredit);
sc->num_reqs = prireqcr + reqcr;
sc->num_prireqs = prireqcr;
sc->num_replies = MIN(sc->max_replyframes + sc->max_evtframes,
sc->facts->MaxReplyDescriptorPostQueueDepth) - 1;
/* Store the request frame size in bytes rather than as 32bit words */
sc->reqframesz = sc->facts->IOCRequestFrameSize * 4;
/*
* Gen3 and beyond uses the IOCMaxChainSegmentSize from IOC Facts to
* get the size of a Chain Frame. Previous versions use the size as a
* Request Frame for the Chain Frame size. If IOCMaxChainSegmentSize
* is 0, use the default value. The IOCMaxChainSegmentSize is the
* number of 16-byte elelements that can fit in a Chain Frame, which is
* the size of an IEEE Simple SGE.
*/
if (sc->facts->MsgVersion >= MPI2_VERSION_02_05) {
chain_seg_size = htole16(sc->facts->IOCMaxChainSegmentSize);
if (chain_seg_size == 0)
chain_seg_size = MPR_DEFAULT_CHAIN_SEG_SIZE;
sc->chain_frame_size = chain_seg_size *
MPR_MAX_CHAIN_ELEMENT_SIZE;
} else {
sc->chain_frame_size = sc->reqframesz;
}
/*
* Max IO Size is Page Size * the following:
* ((SGEs per frame - 1 for chain element) * Max Chain Depth)
* + 1 for no chain needed in last frame
*
* If user suggests a Max IO size to use, use the smaller of the
* user's value and the calculated value as long as the user's
* value is larger than 0. The user's value is in pages.
*/
sges_per_frame = sc->chain_frame_size/sizeof(MPI2_IEEE_SGE_SIMPLE64)-1;
maxio = (sges_per_frame * sc->facts->MaxChainDepth + 1) * PAGE_SIZE;
/*
* If I/O size limitation requested then use it and pass up to CAM.
* If not, use MAXPHYS as an optimization hint, but report HW limit.
*/
if (sc->max_io_pages > 0) {
maxio = min(maxio, sc->max_io_pages * PAGE_SIZE);
sc->maxio = maxio;
} else {
sc->maxio = maxio;
maxio = min(maxio, MAXPHYS);
}
sc->num_chains = (maxio / PAGE_SIZE + sges_per_frame - 2) /
sges_per_frame * reqcr;
if (sc->max_chains > 0 && sc->max_chains < sc->num_chains)
sc->num_chains = sc->max_chains;
/*
* Figure out the number of MSIx-based queues. If the firmware or
* user has done something crazy and not allowed enough credit for
* the queues to be useful then don't enable multi-queue.
*/
if (sc->facts->MaxMSIxVectors < 2)
sc->msi_msgs = 1;
if (sc->msi_msgs > 1) {
sc->msi_msgs = MIN(sc->msi_msgs, mp_ncpus);
sc->msi_msgs = MIN(sc->msi_msgs, sc->facts->MaxMSIxVectors);
if (sc->num_reqs / sc->msi_msgs < 2)
sc->msi_msgs = 1;
}
mpr_dprint(sc, MPR_INIT, "Sized queues to q=%d reqs=%d replies=%d\n",
sc->msi_msgs, sc->num_reqs, sc->num_replies);
}
/*
* This is called during attach and when re-initializing due to a Diag Reset.
* IOC Facts is used to allocate many of the structures needed by the driver.
* If called from attach, de-allocation is not required because the driver has
* not allocated any structures yet, but if called from a Diag Reset, previously
* allocated structures based on IOC Facts will need to be freed and re-
* allocated bases on the latest IOC Facts.
*/
static int
mpr_iocfacts_allocate(struct mpr_softc *sc, uint8_t attaching)
{
int error;
Mpi2IOCFactsReply_t saved_facts;
uint8_t saved_mode, reallocating;
mpr_dprint(sc, MPR_INIT|MPR_TRACE, "%s entered\n", __func__);
/* Save old IOC Facts and then only reallocate if Facts have changed */
if (!attaching) {
bcopy(sc->facts, &saved_facts, sizeof(MPI2_IOC_FACTS_REPLY));
}
/*
* Get IOC Facts. In all cases throughout this function, panic if doing
* a re-initialization and only return the error if attaching so the OS
* can handle it.
*/
if ((error = mpr_get_iocfacts(sc, sc->facts)) != 0) {
if (attaching) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT, "Failed to get "
"IOC Facts with error %d, exit\n", error);
return (error);
} else {
panic("%s failed to get IOC Facts with error %d\n",
__func__, error);
}
}
MPR_DPRINT_PAGE(sc, MPR_XINFO, iocfacts, sc->facts);
snprintf(sc->fw_version, sizeof(sc->fw_version),
"%02d.%02d.%02d.%02d",
sc->facts->FWVersion.Struct.Major,
sc->facts->FWVersion.Struct.Minor,
sc->facts->FWVersion.Struct.Unit,
sc->facts->FWVersion.Struct.Dev);
snprintf(sc->msg_version, sizeof(sc->msg_version), "%d.%d",
(sc->facts->MsgVersion & MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK) >>
MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT,
(sc->facts->MsgVersion & MPI2_IOCFACTS_MSGVERSION_MINOR_MASK) >>
MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT);
mpr_dprint(sc, MPR_INFO, "Firmware: %s, Driver: %s\n", sc->fw_version,
MPR_DRIVER_VERSION);
mpr_dprint(sc, MPR_INFO,
"IOCCapabilities: %b\n", sc->facts->IOCCapabilities,
"\20" "\3ScsiTaskFull" "\4DiagTrace" "\5SnapBuf" "\6ExtBuf"
"\7EEDP" "\10BiDirTarg" "\11Multicast" "\14TransRetry" "\15IR"
"\16EventReplay" "\17RaidAccel" "\20MSIXIndex" "\21HostDisc"
"\22FastPath" "\23RDPQArray" "\24AtomicReqDesc" "\25PCIeSRIOV");
/*
* If the chip doesn't support event replay then a hard reset will be
* required to trigger a full discovery. Do the reset here then
* retransition to Ready. A hard reset might have already been done,
* but it doesn't hurt to do it again. Only do this if attaching, not
* for a Diag Reset.
*/
if (attaching && ((sc->facts->IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY) == 0)) {
mpr_dprint(sc, MPR_INIT, "No event replay, resetting\n");
mpr_diag_reset(sc, NO_SLEEP);
if ((error = mpr_transition_ready(sc)) != 0) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT, "Failed to "
"transition to ready with error %d, exit\n",
error);
return (error);
}
}
/*
* Set flag if IR Firmware is loaded. If the RAID Capability has
* changed from the previous IOC Facts, log a warning, but only if
* checking this after a Diag Reset and not during attach.
*/
saved_mode = sc->ir_firmware;
if (sc->facts->IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID)
sc->ir_firmware = 1;
if (!attaching) {
if (sc->ir_firmware != saved_mode) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT, "new IR/IT mode "
"in IOC Facts does not match previous mode\n");
}
}
/* Only deallocate and reallocate if relevant IOC Facts have changed */
reallocating = FALSE;
sc->mpr_flags &= ~MPR_FLAGS_REALLOCATED;
if ((!attaching) &&
((saved_facts.MsgVersion != sc->facts->MsgVersion) ||
(saved_facts.HeaderVersion != sc->facts->HeaderVersion) ||
(saved_facts.MaxChainDepth != sc->facts->MaxChainDepth) ||
(saved_facts.RequestCredit != sc->facts->RequestCredit) ||
(saved_facts.ProductID != sc->facts->ProductID) ||
(saved_facts.IOCCapabilities != sc->facts->IOCCapabilities) ||
(saved_facts.IOCRequestFrameSize !=
sc->facts->IOCRequestFrameSize) ||
(saved_facts.IOCMaxChainSegmentSize !=
sc->facts->IOCMaxChainSegmentSize) ||
(saved_facts.MaxTargets != sc->facts->MaxTargets) ||
(saved_facts.MaxSasExpanders != sc->facts->MaxSasExpanders) ||
(saved_facts.MaxEnclosures != sc->facts->MaxEnclosures) ||
(saved_facts.HighPriorityCredit != sc->facts->HighPriorityCredit) ||
(saved_facts.MaxReplyDescriptorPostQueueDepth !=
sc->facts->MaxReplyDescriptorPostQueueDepth) ||
(saved_facts.ReplyFrameSize != sc->facts->ReplyFrameSize) ||
(saved_facts.MaxVolumes != sc->facts->MaxVolumes) ||
(saved_facts.MaxPersistentEntries !=
sc->facts->MaxPersistentEntries))) {
reallocating = TRUE;
/* Record that we reallocated everything */
sc->mpr_flags |= MPR_FLAGS_REALLOCATED;
}
/*
* Some things should be done if attaching or re-allocating after a Diag
* Reset, but are not needed after a Diag Reset if the FW has not
* changed.
*/
if (attaching || reallocating) {
/*
* Check if controller supports FW diag buffers and set flag to
* enable each type.
*/
if (sc->facts->IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_TRACE].
enabled = TRUE;
if (sc->facts->IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_SNAPSHOT].
enabled = TRUE;
if (sc->facts->IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_EXTENDED].
enabled = TRUE;
/*
* Set flags for some supported items.
*/
if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP)
sc->eedp_enabled = TRUE;
if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR)
sc->control_TLR = TRUE;
if ((sc->facts->IOCCapabilities &
MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ) &&
(sc->mpr_flags & MPR_FLAGS_SEA_IOC))
sc->atomic_desc_capable = TRUE;
mpr_resize_queues(sc);
/*
* Initialize all Tail Queues
*/
TAILQ_INIT(&sc->req_list);
TAILQ_INIT(&sc->high_priority_req_list);
TAILQ_INIT(&sc->chain_list);
TAILQ_INIT(&sc->prp_page_list);
TAILQ_INIT(&sc->tm_list);
}
/*
* If doing a Diag Reset and the FW is significantly different
* (reallocating will be set above in IOC Facts comparison), then all
* buffers based on the IOC Facts will need to be freed before they are
* reallocated.
*/
if (reallocating) {
mpr_iocfacts_free(sc);
mprsas_realloc_targets(sc, saved_facts.MaxTargets +
saved_facts.MaxVolumes);
}
/*
* Any deallocation has been completed. Now start reallocating
* if needed. Will only need to reallocate if attaching or if the new
* IOC Facts are different from the previous IOC Facts after a Diag
* Reset. Targets have already been allocated above if needed.
*/
error = 0;
while (attaching || reallocating) {
if ((error = mpr_alloc_hw_queues(sc)) != 0)
break;
if ((error = mpr_alloc_replies(sc)) != 0)
break;
if ((error = mpr_alloc_requests(sc)) != 0)
break;
if ((error = mpr_alloc_queues(sc)) != 0)
break;
break;
}
if (error) {
mpr_dprint(sc, MPR_INIT|MPR_ERROR,
"Failed to alloc queues with error %d\n", error);
mpr_free(sc);
return (error);
}
/* Always initialize the queues */
bzero(sc->free_queue, sc->fqdepth * 4);
mpr_init_queues(sc);
/*
* Always get the chip out of the reset state, but only panic if not
* attaching. If attaching and there is an error, that is handled by
* the OS.
*/
error = mpr_transition_operational(sc);
if (error != 0) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT, "Failed to "
"transition to operational with error %d\n", error);
mpr_free(sc);
return (error);
}
/*
* Finish the queue initialization.
* These are set here instead of in mpr_init_queues() because the
* IOC resets these values during the state transition in
* mpr_transition_operational(). The free index is set to 1
* because the corresponding index in the IOC is set to 0, and the
* IOC treats the queues as full if both are set to the same value.
* Hence the reason that the queue can't hold all of the possible
* replies.
*/
sc->replypostindex = 0;
mpr_regwrite(sc, MPI2_REPLY_FREE_HOST_INDEX_OFFSET, sc->replyfreeindex);
mpr_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, 0);
/*
* Attach the subsystems so they can prepare their event masks.
* XXX Should be dynamic so that IM/IR and user modules can attach
*/
error = 0;
while (attaching) {
mpr_dprint(sc, MPR_INIT, "Attaching subsystems\n");
if ((error = mpr_attach_log(sc)) != 0)
break;
if ((error = mpr_attach_sas(sc)) != 0)
break;
if ((error = mpr_attach_user(sc)) != 0)
break;
break;
}
if (error) {
mpr_dprint(sc, MPR_INIT|MPR_ERROR,
"Failed to attach all subsystems: error %d\n", error);
mpr_free(sc);
return (error);
}
/*
* XXX If the number of MSI-X vectors changes during re-init, this
* won't see it and adjust.
*/
if (attaching && (error = mpr_pci_setup_interrupts(sc)) != 0) {
mpr_dprint(sc, MPR_INIT|MPR_ERROR,
"Failed to setup interrupts\n");
mpr_free(sc);
return (error);
}
return (error);
}
/*
* This is called if memory is being free (during detach for example) and when
* buffers need to be reallocated due to a Diag Reset.
*/
static void
mpr_iocfacts_free(struct mpr_softc *sc)
{
struct mpr_command *cm;
int i;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if (sc->free_busaddr != 0)
bus_dmamap_unload(sc->queues_dmat, sc->queues_map);
if (sc->free_queue != NULL)
bus_dmamem_free(sc->queues_dmat, sc->free_queue,
sc->queues_map);
if (sc->queues_dmat != NULL)
bus_dma_tag_destroy(sc->queues_dmat);
if (sc->chain_frames != NULL) {
bus_dmamap_unload(sc->chain_dmat, sc->chain_map);
bus_dmamem_free(sc->chain_dmat, sc->chain_frames,
sc->chain_map);
}
if (sc->chain_dmat != NULL)
bus_dma_tag_destroy(sc->chain_dmat);
if (sc->sense_busaddr != 0)
bus_dmamap_unload(sc->sense_dmat, sc->sense_map);
if (sc->sense_frames != NULL)
bus_dmamem_free(sc->sense_dmat, sc->sense_frames,
sc->sense_map);
if (sc->sense_dmat != NULL)
bus_dma_tag_destroy(sc->sense_dmat);
if (sc->prp_page_busaddr != 0)
bus_dmamap_unload(sc->prp_page_dmat, sc->prp_page_map);
if (sc->prp_pages != NULL)
bus_dmamem_free(sc->prp_page_dmat, sc->prp_pages,
sc->prp_page_map);
if (sc->prp_page_dmat != NULL)
bus_dma_tag_destroy(sc->prp_page_dmat);
if (sc->reply_busaddr != 0)
bus_dmamap_unload(sc->reply_dmat, sc->reply_map);
if (sc->reply_frames != NULL)
bus_dmamem_free(sc->reply_dmat, sc->reply_frames,
sc->reply_map);
if (sc->reply_dmat != NULL)
bus_dma_tag_destroy(sc->reply_dmat);
if (sc->req_busaddr != 0)
bus_dmamap_unload(sc->req_dmat, sc->req_map);
if (sc->req_frames != NULL)
bus_dmamem_free(sc->req_dmat, sc->req_frames, sc->req_map);
if (sc->req_dmat != NULL)
bus_dma_tag_destroy(sc->req_dmat);
if (sc->chains != NULL)
free(sc->chains, M_MPR);
if (sc->prps != NULL)
free(sc->prps, M_MPR);
if (sc->commands != NULL) {
for (i = 1; i < sc->num_reqs; i++) {
cm = &sc->commands[i];
bus_dmamap_destroy(sc->buffer_dmat, cm->cm_dmamap);
}
free(sc->commands, M_MPR);
}
if (sc->buffer_dmat != NULL)
bus_dma_tag_destroy(sc->buffer_dmat);
mpr_pci_free_interrupts(sc);
free(sc->queues, M_MPR);
sc->queues = NULL;
}
/*
* The terms diag reset and hard reset are used interchangeably in the MPI
* docs to mean resetting the controller chip. In this code diag reset
* cleans everything up, and the hard reset function just sends the reset
* sequence to the chip. This should probably be refactored so that every
* subsystem gets a reset notification of some sort, and can clean up
* appropriately.
*/
int
mpr_reinit(struct mpr_softc *sc)
{
int error;
struct mprsas_softc *sassc;
sassc = sc->sassc;
MPR_FUNCTRACE(sc);
mtx_assert(&sc->mpr_mtx, MA_OWNED);
mpr_dprint(sc, MPR_INIT|MPR_INFO, "Reinitializing controller\n");
if (sc->mpr_flags & MPR_FLAGS_DIAGRESET) {
mpr_dprint(sc, MPR_INIT, "Reset already in progress\n");
return 0;
}
/*
* Make sure the completion callbacks can recognize they're getting
* a NULL cm_reply due to a reset.
*/
sc->mpr_flags |= MPR_FLAGS_DIAGRESET;
/*
* Mask interrupts here.
*/
mpr_dprint(sc, MPR_INIT, "Masking interrupts and resetting\n");
mpr_mask_intr(sc);
error = mpr_diag_reset(sc, CAN_SLEEP);
if (error != 0) {
panic("%s hard reset failed with error %d\n", __func__, error);
}
/* Restore the PCI state, including the MSI-X registers */
mpr_pci_restore(sc);
/* Give the I/O subsystem special priority to get itself prepared */
mprsas_handle_reinit(sc);
/*
* Get IOC Facts and allocate all structures based on this information.
* The attach function will also call mpr_iocfacts_allocate at startup.
* If relevant values have changed in IOC Facts, this function will free
* all of the memory based on IOC Facts and reallocate that memory.
*/
if ((error = mpr_iocfacts_allocate(sc, FALSE)) != 0) {
panic("%s IOC Facts based allocation failed with error %d\n",
__func__, error);
}
/*
* Mapping structures will be re-allocated after getting IOC Page8, so
* free these structures here.
*/
mpr_mapping_exit(sc);
/*
* The static page function currently read is IOC Page8. Others can be
* added in future. It's possible that the values in IOC Page8 have
* changed after a Diag Reset due to user modification, so always read
* these. Interrupts are masked, so unmask them before getting config
* pages.
*/
mpr_unmask_intr(sc);
sc->mpr_flags &= ~MPR_FLAGS_DIAGRESET;
mpr_base_static_config_pages(sc);
/*
* Some mapping info is based in IOC Page8 data, so re-initialize the
* mapping tables.
*/
mpr_mapping_initialize(sc);
/*
* Restart will reload the event masks clobbered by the reset, and
* then enable the port.
*/
mpr_reregister_events(sc);
/* the end of discovery will release the simq, so we're done. */
mpr_dprint(sc, MPR_INIT|MPR_XINFO, "Finished sc %p post %u free %u\n",
sc, sc->replypostindex, sc->replyfreeindex);
mprsas_release_simq_reinit(sassc);
mpr_dprint(sc, MPR_INIT, "%s exit error= %d\n", __func__, error);
return 0;
}
/* Wait for the chip to ACK a word that we've put into its FIFO
* Wait for <timeout> seconds. In single loop wait for busy loop
* for 500 microseconds.
* Total is [ 0.5 * (2000 * <timeout>) ] in miliseconds.
* */
static int
mpr_wait_db_ack(struct mpr_softc *sc, int timeout, int sleep_flag)
{
u32 cntdn, count;
u32 int_status;
u32 doorbell;
count = 0;
cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
do {
int_status = mpr_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET);
if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
mpr_dprint(sc, MPR_TRACE, "%s: successful count(%d), "
"timeout(%d)\n", __func__, count, timeout);
return 0;
} else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
doorbell = mpr_regread(sc, MPI2_DOORBELL_OFFSET);
if ((doorbell & MPI2_IOC_STATE_MASK) ==
MPI2_IOC_STATE_FAULT) {
mpr_dprint(sc, MPR_FAULT,
"fault_state(0x%04x)!\n", doorbell);
return (EFAULT);
}
} else if (int_status == 0xFFFFFFFF)
goto out;
/*
* If it can sleep, sleep for 1 milisecond, else busy loop for
* 0.5 milisecond
*/
if (mtx_owned(&sc->mpr_mtx) && sleep_flag == CAN_SLEEP)
msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0, "mprdba",
hz/1000);
else if (sleep_flag == CAN_SLEEP)
pause("mprdba", hz/1000);
else
DELAY(500);
count++;
} while (--cntdn);
out:
mpr_dprint(sc, MPR_FAULT, "%s: failed due to timeout count(%d), "
"int_status(%x)!\n", __func__, count, int_status);
return (ETIMEDOUT);
}
/* Wait for the chip to signal that the next word in its FIFO can be fetched */
static int
mpr_wait_db_int(struct mpr_softc *sc)
{
int retry;
for (retry = 0; retry < MPR_DB_MAX_WAIT; retry++) {
if ((mpr_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET) &
MPI2_HIS_IOC2SYS_DB_STATUS) != 0)
return (0);
DELAY(2000);
}
return (ETIMEDOUT);
}
/* Step through the synchronous command state machine, i.e. "Doorbell mode" */
static int
mpr_request_sync(struct mpr_softc *sc, void *req, MPI2_DEFAULT_REPLY *reply,
int req_sz, int reply_sz, int timeout)
{
uint32_t *data32;
uint16_t *data16;
int i, count, ioc_sz, residual;
int sleep_flags = CAN_SLEEP;
if (curthread->td_no_sleeping)
sleep_flags = NO_SLEEP;
/* Step 1 */
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
/* Step 2 */
if (mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED)
return (EBUSY);
/* Step 3
* Announce that a message is coming through the doorbell. Messages
* are pushed at 32bit words, so round up if needed.
*/
count = (req_sz + 3) / 4;
mpr_regwrite(sc, MPI2_DOORBELL_OFFSET,
(MPI2_FUNCTION_HANDSHAKE << MPI2_DOORBELL_FUNCTION_SHIFT) |
(count << MPI2_DOORBELL_ADD_DWORDS_SHIFT));
/* Step 4 */
if (mpr_wait_db_int(sc) ||
(mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) == 0) {
mpr_dprint(sc, MPR_FAULT, "Doorbell failed to activate\n");
return (ENXIO);
}
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
if (mpr_wait_db_ack(sc, 5, sleep_flags) != 0) {
mpr_dprint(sc, MPR_FAULT, "Doorbell handshake failed\n");
return (ENXIO);
}
/* Step 5 */
/* Clock out the message data synchronously in 32-bit dwords*/
data32 = (uint32_t *)req;
for (i = 0; i < count; i++) {
mpr_regwrite(sc, MPI2_DOORBELL_OFFSET, htole32(data32[i]));
if (mpr_wait_db_ack(sc, 5, sleep_flags) != 0) {
mpr_dprint(sc, MPR_FAULT,
"Timeout while writing doorbell\n");
return (ENXIO);
}
}
/* Step 6 */
/* Clock in the reply in 16-bit words. The total length of the
* message is always in the 4th byte, so clock out the first 2 words
* manually, then loop the rest.
*/
data16 = (uint16_t *)reply;
if (mpr_wait_db_int(sc) != 0) {
mpr_dprint(sc, MPR_FAULT, "Timeout reading doorbell 0\n");
return (ENXIO);
}
data16[0] =
mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK;
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
if (mpr_wait_db_int(sc) != 0) {
mpr_dprint(sc, MPR_FAULT, "Timeout reading doorbell 1\n");
return (ENXIO);
}
data16[1] =
mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK;
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
/* Number of 32bit words in the message */
ioc_sz = reply->MsgLength;
/*
* Figure out how many 16bit words to clock in without overrunning.
* The precision loss with dividing reply_sz can safely be
* ignored because the messages can only be multiples of 32bits.
*/
residual = 0;
count = MIN((reply_sz / 4), ioc_sz) * 2;
if (count < ioc_sz * 2) {
residual = ioc_sz * 2 - count;
mpr_dprint(sc, MPR_ERROR, "Driver error, throwing away %d "
"residual message words\n", residual);
}
for (i = 2; i < count; i++) {
if (mpr_wait_db_int(sc) != 0) {
mpr_dprint(sc, MPR_FAULT,
"Timeout reading doorbell %d\n", i);
return (ENXIO);
}
data16[i] = mpr_regread(sc, MPI2_DOORBELL_OFFSET) &
MPI2_DOORBELL_DATA_MASK;
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
}
/*
* Pull out residual words that won't fit into the provided buffer.
* This keeps the chip from hanging due to a driver programming
* error.
*/
while (residual--) {
if (mpr_wait_db_int(sc) != 0) {
mpr_dprint(sc, MPR_FAULT, "Timeout reading doorbell\n");
return (ENXIO);
}
(void)mpr_regread(sc, MPI2_DOORBELL_OFFSET);
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
}
/* Step 7 */
if (mpr_wait_db_int(sc) != 0) {
mpr_dprint(sc, MPR_FAULT, "Timeout waiting to exit doorbell\n");
return (ENXIO);
}
if (mpr_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED)
mpr_dprint(sc, MPR_FAULT, "Warning, doorbell still active\n");
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
return (0);
}
static void
mpr_enqueue_request(struct mpr_softc *sc, struct mpr_command *cm)
{
request_descriptor rd;
MPR_FUNCTRACE(sc);
mpr_dprint(sc, MPR_TRACE, "SMID %u cm %p ccb %p\n",
cm->cm_desc.Default.SMID, cm, cm->cm_ccb);
if (sc->mpr_flags & MPR_FLAGS_ATTACH_DONE && !(sc->mpr_flags &
MPR_FLAGS_SHUTDOWN))
mtx_assert(&sc->mpr_mtx, MA_OWNED);
if (++sc->io_cmds_active > sc->io_cmds_highwater)
sc->io_cmds_highwater++;
KASSERT(cm->cm_state == MPR_CM_STATE_BUSY, ("command not busy\n"));
cm->cm_state = MPR_CM_STATE_INQUEUE;
if (sc->atomic_desc_capable) {
rd.u.low = cm->cm_desc.Words.Low;
mpr_regwrite(sc, MPI26_ATOMIC_REQUEST_DESCRIPTOR_POST_OFFSET,
rd.u.low);
} else {
rd.u.low = cm->cm_desc.Words.Low;
rd.u.high = cm->cm_desc.Words.High;
rd.word = htole64(rd.word);
mpr_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET,
rd.u.low);
mpr_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET,
rd.u.high);
}
}
/*
* Just the FACTS, ma'am.
*/
static int
mpr_get_iocfacts(struct mpr_softc *sc, MPI2_IOC_FACTS_REPLY *facts)
{
MPI2_DEFAULT_REPLY *reply;
MPI2_IOC_FACTS_REQUEST request;
int error, req_sz, reply_sz;
MPR_FUNCTRACE(sc);
mpr_dprint(sc, MPR_INIT, "%s entered\n", __func__);
req_sz = sizeof(MPI2_IOC_FACTS_REQUEST);
reply_sz = sizeof(MPI2_IOC_FACTS_REPLY);
reply = (MPI2_DEFAULT_REPLY *)facts;
bzero(&request, req_sz);
request.Function = MPI2_FUNCTION_IOC_FACTS;
error = mpr_request_sync(sc, &request, reply, req_sz, reply_sz, 5);
mpr_dprint(sc, MPR_INIT, "%s exit, error= %d\n", __func__, error);
return (error);
}
static int
mpr_send_iocinit(struct mpr_softc *sc)
{
MPI2_IOC_INIT_REQUEST init;
MPI2_DEFAULT_REPLY reply;
int req_sz, reply_sz, error;
struct timeval now;
uint64_t time_in_msec;
MPR_FUNCTRACE(sc);
mpr_dprint(sc, MPR_INIT, "%s entered\n", __func__);
/* Do a quick sanity check on proper initialization */
if ((sc->pqdepth == 0) || (sc->fqdepth == 0) || (sc->reqframesz == 0)
|| (sc->replyframesz == 0)) {
mpr_dprint(sc, MPR_INIT|MPR_ERROR,
"Driver not fully initialized for IOCInit\n");
return (EINVAL);
}
req_sz = sizeof(MPI2_IOC_INIT_REQUEST);
reply_sz = sizeof(MPI2_IOC_INIT_REPLY);
bzero(&init, req_sz);
bzero(&reply, reply_sz);
/*
* Fill in the init block. Note that most addresses are
* deliberately in the lower 32bits of memory. This is a micro-
* optimzation for PCI/PCIX, though it's not clear if it helps PCIe.
*/
init.Function = MPI2_FUNCTION_IOC_INIT;
init.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
init.MsgVersion = htole16(MPI2_VERSION);
init.HeaderVersion = htole16(MPI2_HEADER_VERSION);
init.SystemRequestFrameSize = htole16((uint16_t)(sc->reqframesz / 4));
init.ReplyDescriptorPostQueueDepth = htole16(sc->pqdepth);
init.ReplyFreeQueueDepth = htole16(sc->fqdepth);
init.SenseBufferAddressHigh = 0;
init.SystemReplyAddressHigh = 0;
init.SystemRequestFrameBaseAddress.High = 0;
init.SystemRequestFrameBaseAddress.Low =
htole32((uint32_t)sc->req_busaddr);
init.ReplyDescriptorPostQueueAddress.High = 0;
init.ReplyDescriptorPostQueueAddress.Low =
htole32((uint32_t)sc->post_busaddr);
init.ReplyFreeQueueAddress.High = 0;
init.ReplyFreeQueueAddress.Low = htole32((uint32_t)sc->free_busaddr);
getmicrotime(&now);
time_in_msec = (now.tv_sec * 1000 + now.tv_usec/1000);
init.TimeStamp.High = htole32((time_in_msec >> 32) & 0xFFFFFFFF);
init.TimeStamp.Low = htole32(time_in_msec & 0xFFFFFFFF);
init.HostPageSize = HOST_PAGE_SIZE_4K;
error = mpr_request_sync(sc, &init, &reply, req_sz, reply_sz, 5);
if ((reply.IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS)
error = ENXIO;
mpr_dprint(sc, MPR_INIT, "IOCInit status= 0x%x\n", reply.IOCStatus);
mpr_dprint(sc, MPR_INIT, "%s exit\n", __func__);
return (error);
}
void
mpr_memaddr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
bus_addr_t *addr;
addr = arg;
*addr = segs[0].ds_addr;
}
void
mpr_memaddr_wait_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
struct mpr_busdma_context *ctx;
int need_unload, need_free;
ctx = (struct mpr_busdma_context *)arg;
need_unload = 0;
need_free = 0;
mpr_lock(ctx->softc);
ctx->error = error;
ctx->completed = 1;
if ((error == 0) && (ctx->abandoned == 0)) {
*ctx->addr = segs[0].ds_addr;
} else {
if (nsegs != 0)
need_unload = 1;
if (ctx->abandoned != 0)
need_free = 1;
}
if (need_free == 0)
wakeup(ctx);
mpr_unlock(ctx->softc);
if (need_unload != 0) {
bus_dmamap_unload(ctx->buffer_dmat,
ctx->buffer_dmamap);
*ctx->addr = 0;
}
if (need_free != 0)
free(ctx, M_MPR);
}
static int
mpr_alloc_queues(struct mpr_softc *sc)
{
struct mpr_queue *q;
int nq, i;
nq = sc->msi_msgs;
mpr_dprint(sc, MPR_INIT|MPR_XINFO, "Allocating %d I/O queues\n", nq);
sc->queues = malloc(sizeof(struct mpr_queue) * nq, M_MPR,
M_NOWAIT|M_ZERO);
if (sc->queues == NULL)
return (ENOMEM);
for (i = 0; i < nq; i++) {
q = &sc->queues[i];
mpr_dprint(sc, MPR_INIT, "Configuring queue %d %p\n", i, q);
q->sc = sc;
q->qnum = i;
}
return (0);
}
static int
mpr_alloc_hw_queues(struct mpr_softc *sc)
{
bus_dma_tag_template_t t;
bus_addr_t queues_busaddr;
uint8_t *queues;
int qsize, fqsize, pqsize;
/*
* The reply free queue contains 4 byte entries in multiples of 16 and
* aligned on a 16 byte boundary. There must always be an unused entry.
* This queue supplies fresh reply frames for the firmware to use.
*
* The reply descriptor post queue contains 8 byte entries in
* multiples of 16 and aligned on a 16 byte boundary. This queue
* contains filled-in reply frames sent from the firmware to the host.
*
* These two queues are allocated together for simplicity.
*/
sc->fqdepth = roundup2(sc->num_replies + 1, 16);
sc->pqdepth = roundup2(sc->num_replies + 1, 16);
fqsize= sc->fqdepth * 4;
pqsize = sc->pqdepth * 8;
qsize = fqsize + pqsize;
bus_dma_template_init(&t, sc->mpr_parent_dmat);
t.alignment = 16;
t.lowaddr = BUS_SPACE_MAXADDR_32BIT;
t.maxsize = t.maxsegsize = qsize;
t.nsegments = 1;
if (bus_dma_template_tag(&t, &sc->queues_dmat)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate queues DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->queues_dmat, (void **)&queues, BUS_DMA_NOWAIT,
&sc->queues_map)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate queues memory\n");
return (ENOMEM);
}
bzero(queues, qsize);
bus_dmamap_load(sc->queues_dmat, sc->queues_map, queues, qsize,
mpr_memaddr_cb, &queues_busaddr, 0);
sc->free_queue = (uint32_t *)queues;
sc->free_busaddr = queues_busaddr;
sc->post_queue = (MPI2_REPLY_DESCRIPTORS_UNION *)(queues + fqsize);
sc->post_busaddr = queues_busaddr + fqsize;
mpr_dprint(sc, MPR_INIT, "free queue busaddr= %#016jx size= %d\n",
(uintmax_t)sc->free_busaddr, fqsize);
mpr_dprint(sc, MPR_INIT, "reply queue busaddr= %#016jx size= %d\n",
(uintmax_t)sc->post_busaddr, pqsize);
return (0);
}
static int
mpr_alloc_replies(struct mpr_softc *sc)
{
bus_dma_tag_template_t t;
int rsize, num_replies;
/* Store the reply frame size in bytes rather than as 32bit words */
sc->replyframesz = sc->facts->ReplyFrameSize * 4;
/*
* sc->num_replies should be one less than sc->fqdepth. We need to
* allocate space for sc->fqdepth replies, but only sc->num_replies
* replies can be used at once.
*/
num_replies = max(sc->fqdepth, sc->num_replies);
rsize = sc->replyframesz * num_replies;
bus_dma_template_init(&t, sc->mpr_parent_dmat);
t.alignment = 4;
t.lowaddr = BUS_SPACE_MAXADDR_32BIT;
t.maxsize = t.maxsegsize = rsize;
t.nsegments = 1;
if (bus_dma_template_tag(&t, &sc->reply_dmat)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate replies DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->reply_dmat, (void **)&sc->reply_frames,
BUS_DMA_NOWAIT, &sc->reply_map)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate replies memory\n");
return (ENOMEM);
}
bzero(sc->reply_frames, rsize);
bus_dmamap_load(sc->reply_dmat, sc->reply_map, sc->reply_frames, rsize,
mpr_memaddr_cb, &sc->reply_busaddr, 0);
mpr_dprint(sc, MPR_INIT, "reply frames busaddr= %#016jx size= %d\n",
(uintmax_t)sc->reply_busaddr, rsize);
return (0);
}
static void
mpr_load_chains_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
struct mpr_softc *sc = arg;
struct mpr_chain *chain;
bus_size_t bo;
int i, o, s;
if (error != 0)
return;
for (i = 0, o = 0, s = 0; s < nsegs; s++) {
for (bo = 0; bo + sc->chain_frame_size <= segs[s].ds_len;
bo += sc->chain_frame_size) {
chain = &sc->chains[i++];
chain->chain =(MPI2_SGE_IO_UNION *)(sc->chain_frames+o);
chain->chain_busaddr = segs[s].ds_addr + bo;
o += sc->chain_frame_size;
mpr_free_chain(sc, chain);
}
if (bo != segs[s].ds_len)
o += segs[s].ds_len - bo;
}
sc->chain_free_lowwater = i;
}
static int
mpr_alloc_requests(struct mpr_softc *sc)
{
bus_dma_tag_template_t t;
struct mpr_command *cm;
int i, rsize, nsegs;
rsize = sc->reqframesz * sc->num_reqs;
bus_dma_template_init(&t, sc->mpr_parent_dmat);
t.alignment = 16;
t.lowaddr = BUS_SPACE_MAXADDR_32BIT;
t.maxsize = t.maxsegsize = rsize;
t.nsegments = 1;
if (bus_dma_template_tag(&t, &sc->req_dmat)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate request DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->req_dmat, (void **)&sc->req_frames,
BUS_DMA_NOWAIT, &sc->req_map)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate request memory\n");
return (ENOMEM);
}
bzero(sc->req_frames, rsize);
bus_dmamap_load(sc->req_dmat, sc->req_map, sc->req_frames, rsize,
mpr_memaddr_cb, &sc->req_busaddr, 0);
mpr_dprint(sc, MPR_INIT, "request frames busaddr= %#016jx size= %d\n",
(uintmax_t)sc->req_busaddr, rsize);
sc->chains = malloc(sizeof(struct mpr_chain) * sc->num_chains, M_MPR,
M_NOWAIT | M_ZERO);
if (!sc->chains) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate chain memory\n");
return (ENOMEM);
}
rsize = sc->chain_frame_size * sc->num_chains;
bus_dma_template_init(&t, sc->mpr_parent_dmat);
t.alignment = 16;
t.maxsize = t.maxsegsize = rsize;
t.nsegments = howmany(rsize, PAGE_SIZE);
if (bus_dma_template_tag(&t, &sc->chain_dmat)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate chain DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->chain_dmat, (void **)&sc->chain_frames,
BUS_DMA_NOWAIT | BUS_DMA_ZERO, &sc->chain_map)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate chain memory\n");
return (ENOMEM);
}
if (bus_dmamap_load(sc->chain_dmat, sc->chain_map, sc->chain_frames,
rsize, mpr_load_chains_cb, sc, BUS_DMA_NOWAIT)) {
mpr_dprint(sc, MPR_ERROR, "Cannot load chain memory\n");
bus_dmamem_free(sc->chain_dmat, sc->chain_frames,
sc->chain_map);
return (ENOMEM);
}
rsize = MPR_SENSE_LEN * sc->num_reqs;
bus_dma_template_clone(&t, sc->req_dmat);
t.maxsize = t.maxsegsize = rsize;
if (bus_dma_template_tag(&t, &sc->sense_dmat)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate sense DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->sense_dmat, (void **)&sc->sense_frames,
BUS_DMA_NOWAIT, &sc->sense_map)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate sense memory\n");
return (ENOMEM);
}
bzero(sc->sense_frames, rsize);
bus_dmamap_load(sc->sense_dmat, sc->sense_map, sc->sense_frames, rsize,
mpr_memaddr_cb, &sc->sense_busaddr, 0);
mpr_dprint(sc, MPR_INIT, "sense frames busaddr= %#016jx size= %d\n",
(uintmax_t)sc->sense_busaddr, rsize);
/*
* Allocate NVMe PRP Pages for NVMe SGL support only if the FW supports
* these devices.
*/
if ((sc->facts->MsgVersion >= MPI2_VERSION_02_06) &&
(sc->facts->ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES)) {
if (mpr_alloc_nvme_prp_pages(sc) == ENOMEM)
return (ENOMEM);
}
nsegs = (sc->maxio / PAGE_SIZE) + 1;
bus_dma_template_init(&t, sc->mpr_parent_dmat);
t.nsegments = nsegs;
t.flags = BUS_DMA_ALLOCNOW;
t.lockfunc = busdma_lock_mutex;
t.lockfuncarg = &sc->mpr_mtx;
if (bus_dma_template_tag(&t, &sc->buffer_dmat)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate buffer DMA tag\n");
return (ENOMEM);
}
/*
* SMID 0 cannot be used as a free command per the firmware spec.
* Just drop that command instead of risking accounting bugs.
*/
sc->commands = malloc(sizeof(struct mpr_command) * sc->num_reqs,
M_MPR, M_WAITOK | M_ZERO);
if (!sc->commands) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate command memory\n");
return (ENOMEM);
}
for (i = 1; i < sc->num_reqs; i++) {
cm = &sc->commands[i];
cm->cm_req = sc->req_frames + i * sc->reqframesz;
cm->cm_req_busaddr = sc->req_busaddr + i * sc->reqframesz;
cm->cm_sense = &sc->sense_frames[i];
cm->cm_sense_busaddr = sc->sense_busaddr + i * MPR_SENSE_LEN;
cm->cm_desc.Default.SMID = i;
cm->cm_sc = sc;
cm->cm_state = MPR_CM_STATE_BUSY;
TAILQ_INIT(&cm->cm_chain_list);
TAILQ_INIT(&cm->cm_prp_page_list);
callout_init_mtx(&cm->cm_callout, &sc->mpr_mtx, 0);
/* XXX Is a failure here a critical problem? */
if (bus_dmamap_create(sc->buffer_dmat, 0, &cm->cm_dmamap)
== 0) {
if (i <= sc->num_prireqs)
mpr_free_high_priority_command(sc, cm);
else
mpr_free_command(sc, cm);
} else {
panic("failed to allocate command %d\n", i);
sc->num_reqs = i;
break;
}
}
return (0);
}
/*
* Allocate contiguous buffers for PCIe NVMe devices for building native PRPs,
* which are scatter/gather lists for NVMe devices.
*
* This buffer must be contiguous due to the nature of how NVMe PRPs are built
* and translated by FW.
*
* returns ENOMEM if memory could not be allocated, otherwise returns 0.
*/
static int
mpr_alloc_nvme_prp_pages(struct mpr_softc *sc)
{
bus_dma_tag_template_t t;
struct mpr_prp_page *prp_page;
int PRPs_per_page, PRPs_required, pages_required;
int rsize, i;
/*
* Assuming a MAX_IO_SIZE of 1MB and a PAGE_SIZE of 4k, the max number
* of PRPs (NVMe's Scatter/Gather Element) needed per I/O is:
* MAX_IO_SIZE / PAGE_SIZE = 256
*
* 1 PRP entry in main frame for PRP list pointer still leaves 255 PRPs
* required for the remainder of the 1MB I/O. 512 PRPs can fit into one
* page (4096 / 8 = 512), so only one page is required for each I/O.
*
* Each of these buffers will need to be contiguous. For simplicity,
* only one buffer is allocated here, which has all of the space
* required for the NVMe Queue Depth. If there are problems allocating
* this one buffer, this function will need to change to allocate
* individual, contiguous NVME_QDEPTH buffers.
*
* The real calculation will use the real max io size. Above is just an
* example.
*
*/
PRPs_required = sc->maxio / PAGE_SIZE;
PRPs_per_page = (PAGE_SIZE / PRP_ENTRY_SIZE) - 1;
pages_required = (PRPs_required / PRPs_per_page) + 1;
sc->prp_buffer_size = PAGE_SIZE * pages_required;
rsize = sc->prp_buffer_size * NVME_QDEPTH;
bus_dma_template_init(&t, sc->mpr_parent_dmat);
t.alignment = 4;
t.lowaddr = BUS_SPACE_MAXADDR_32BIT;
t.maxsize = t.maxsegsize = rsize;
t.nsegments = 1;
if (bus_dma_template_tag(&t, &sc->prp_page_dmat)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate NVMe PRP DMA "
"tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->prp_page_dmat, (void **)&sc->prp_pages,
BUS_DMA_NOWAIT, &sc->prp_page_map)) {
mpr_dprint(sc, MPR_ERROR, "Cannot allocate NVMe PRP memory\n");
return (ENOMEM);
}
bzero(sc->prp_pages, rsize);
bus_dmamap_load(sc->prp_page_dmat, sc->prp_page_map, sc->prp_pages,
rsize, mpr_memaddr_cb, &sc->prp_page_busaddr, 0);
sc->prps = malloc(sizeof(struct mpr_prp_page) * NVME_QDEPTH, M_MPR,
M_WAITOK | M_ZERO);
for (i = 0; i < NVME_QDEPTH; i++) {
prp_page = &sc->prps[i];
prp_page->prp_page = (uint64_t *)(sc->prp_pages +
i * sc->prp_buffer_size);
prp_page->prp_page_busaddr = (uint64_t)(sc->prp_page_busaddr +
i * sc->prp_buffer_size);
mpr_free_prp_page(sc, prp_page);
sc->prp_pages_free_lowwater++;
}
return (0);
}
static int
mpr_init_queues(struct mpr_softc *sc)
{
int i;
memset((uint8_t *)sc->post_queue, 0xff, sc->pqdepth * 8);
/*
* According to the spec, we need to use one less reply than we
* have space for on the queue. So sc->num_replies (the number we
* use) should be less than sc->fqdepth (allocated size).
*/
if (sc->num_replies >= sc->fqdepth)
return (EINVAL);
/*
* Initialize all of the free queue entries.
*/
for (i = 0; i < sc->fqdepth; i++) {
sc->free_queue[i] = sc->reply_busaddr + (i * sc->replyframesz);
}
sc->replyfreeindex = sc->num_replies;
return (0);
}
/* Get the driver parameter tunables. Lowest priority are the driver defaults.
* Next are the global settings, if they exist. Highest are the per-unit
* settings, if they exist.
*/
void
mpr_get_tunables(struct mpr_softc *sc)
{
char tmpstr[80], mpr_debug[80];
/* XXX default to some debugging for now */
sc->mpr_debug = MPR_INFO | MPR_FAULT;
sc->disable_msix = 0;
sc->disable_msi = 0;
sc->max_msix = MPR_MSIX_MAX;
sc->max_chains = MPR_CHAIN_FRAMES;
sc->max_io_pages = MPR_MAXIO_PAGES;
sc->enable_ssu = MPR_SSU_ENABLE_SSD_DISABLE_HDD;
sc->spinup_wait_time = DEFAULT_SPINUP_WAIT;
sc->use_phynum = 1;
sc->max_reqframes = MPR_REQ_FRAMES;
sc->max_prireqframes = MPR_PRI_REQ_FRAMES;
sc->max_replyframes = MPR_REPLY_FRAMES;
sc->max_evtframes = MPR_EVT_REPLY_FRAMES;
/*
* Grab the global variables.
*/
bzero(mpr_debug, 80);
if (TUNABLE_STR_FETCH("hw.mpr.debug_level", mpr_debug, 80) != 0)
mpr_parse_debug(sc, mpr_debug);
TUNABLE_INT_FETCH("hw.mpr.disable_msix", &sc->disable_msix);
TUNABLE_INT_FETCH("hw.mpr.disable_msi", &sc->disable_msi);
TUNABLE_INT_FETCH("hw.mpr.max_msix", &sc->max_msix);
TUNABLE_INT_FETCH("hw.mpr.max_chains", &sc->max_chains);
TUNABLE_INT_FETCH("hw.mpr.max_io_pages", &sc->max_io_pages);
TUNABLE_INT_FETCH("hw.mpr.enable_ssu", &sc->enable_ssu);
TUNABLE_INT_FETCH("hw.mpr.spinup_wait_time", &sc->spinup_wait_time);
TUNABLE_INT_FETCH("hw.mpr.use_phy_num", &sc->use_phynum);
TUNABLE_INT_FETCH("hw.mpr.max_reqframes", &sc->max_reqframes);
TUNABLE_INT_FETCH("hw.mpr.max_prireqframes", &sc->max_prireqframes);
TUNABLE_INT_FETCH("hw.mpr.max_replyframes", &sc->max_replyframes);
TUNABLE_INT_FETCH("hw.mpr.max_evtframes", &sc->max_evtframes);
/* Grab the unit-instance variables */
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.debug_level",
device_get_unit(sc->mpr_dev));
bzero(mpr_debug, 80);
if (TUNABLE_STR_FETCH(tmpstr, mpr_debug, 80) != 0)
mpr_parse_debug(sc, mpr_debug);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.disable_msix",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->disable_msix);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.disable_msi",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->disable_msi);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.max_msix",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->max_msix);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.max_chains",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->max_chains);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.max_io_pages",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->max_io_pages);
bzero(sc->exclude_ids, sizeof(sc->exclude_ids));
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.exclude_ids",
device_get_unit(sc->mpr_dev));
TUNABLE_STR_FETCH(tmpstr, sc->exclude_ids, sizeof(sc->exclude_ids));
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.enable_ssu",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->enable_ssu);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.spinup_wait_time",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->spinup_wait_time);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.use_phy_num",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->use_phynum);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.max_reqframes",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->max_reqframes);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.max_prireqframes",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->max_prireqframes);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.max_replyframes",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->max_replyframes);
snprintf(tmpstr, sizeof(tmpstr), "dev.mpr.%d.max_evtframes",
device_get_unit(sc->mpr_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->max_evtframes);
}
static void
mpr_setup_sysctl(struct mpr_softc *sc)
{
struct sysctl_ctx_list *sysctl_ctx = NULL;
struct sysctl_oid *sysctl_tree = NULL;
char tmpstr[80], tmpstr2[80];
/*
* Setup the sysctl variable so the user can change the debug level
* on the fly.
*/
snprintf(tmpstr, sizeof(tmpstr), "MPR controller %d",
device_get_unit(sc->mpr_dev));
snprintf(tmpstr2, sizeof(tmpstr2), "%d", device_get_unit(sc->mpr_dev));
sysctl_ctx = device_get_sysctl_ctx(sc->mpr_dev);
if (sysctl_ctx != NULL)
sysctl_tree = device_get_sysctl_tree(sc->mpr_dev);
if (sysctl_tree == NULL) {
sysctl_ctx_init(&sc->sysctl_ctx);
sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_mpr), OID_AUTO, tmpstr2,
CTLFLAG_RD | CTLFLAG_MPSAFE, 0, tmpstr);
if (sc->sysctl_tree == NULL)
return;
sysctl_ctx = &sc->sysctl_ctx;
sysctl_tree = sc->sysctl_tree;
}
SYSCTL_ADD_PROC(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "debug_level", CTLTYPE_STRING | CTLFLAG_RW | CTLFLAG_MPSAFE,
sc, 0, mpr_debug_sysctl, "A", "mpr debug level");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "disable_msix", CTLFLAG_RD, &sc->disable_msix, 0,
"Disable the use of MSI-X interrupts");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "max_msix", CTLFLAG_RD, &sc->max_msix, 0,
"User-defined maximum number of MSIX queues");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "msix_msgs", CTLFLAG_RD, &sc->msi_msgs, 0,
"Negotiated number of MSIX queues");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "max_reqframes", CTLFLAG_RD, &sc->max_reqframes, 0,
"Total number of allocated request frames");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "max_prireqframes", CTLFLAG_RD, &sc->max_prireqframes, 0,
"Total number of allocated high priority request frames");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "max_replyframes", CTLFLAG_RD, &sc->max_replyframes, 0,
"Total number of allocated reply frames");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "max_evtframes", CTLFLAG_RD, &sc->max_evtframes, 0,
"Total number of event frames allocated");
SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "firmware_version", CTLFLAG_RD, sc->fw_version,
strlen(sc->fw_version), "firmware version");
SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "driver_version", CTLFLAG_RD, MPR_DRIVER_VERSION,
strlen(MPR_DRIVER_VERSION), "driver version");
SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "msg_version", CTLFLAG_RD, sc->msg_version,
strlen(sc->msg_version), "message interface version");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "io_cmds_active", CTLFLAG_RD,
&sc->io_cmds_active, 0, "number of currently active commands");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "io_cmds_highwater", CTLFLAG_RD,
&sc->io_cmds_highwater, 0, "maximum active commands seen");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "chain_free", CTLFLAG_RD,
&sc->chain_free, 0, "number of free chain elements");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "chain_free_lowwater", CTLFLAG_RD,
&sc->chain_free_lowwater, 0,"lowest number of free chain elements");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "max_chains", CTLFLAG_RD,
&sc->max_chains, 0,"maximum chain frames that will be allocated");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "max_io_pages", CTLFLAG_RD,
&sc->max_io_pages, 0,"maximum pages to allow per I/O (if <1 use "
"IOCFacts)");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "enable_ssu", CTLFLAG_RW, &sc->enable_ssu, 0,
"enable SSU to SATA SSD/HDD at shutdown");
SYSCTL_ADD_UQUAD(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "chain_alloc_fail", CTLFLAG_RD,
&sc->chain_alloc_fail, "chain allocation failures");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "spinup_wait_time", CTLFLAG_RD,
&sc->spinup_wait_time, DEFAULT_SPINUP_WAIT, "seconds to wait for "
"spinup after SATA ID error");
SYSCTL_ADD_PROC(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "dump_reqs",
CTLTYPE_OPAQUE | CTLFLAG_RD | CTLFLAG_SKIP | CTLFLAG_NEEDGIANT,
sc, 0, mpr_dump_reqs, "I", "Dump Active Requests");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "use_phy_num", CTLFLAG_RD, &sc->use_phynum, 0,
"Use the phy number for enumeration");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "prp_pages_free", CTLFLAG_RD,
&sc->prp_pages_free, 0, "number of free PRP pages");
SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "prp_pages_free_lowwater", CTLFLAG_RD,
&sc->prp_pages_free_lowwater, 0,"lowest number of free PRP pages");
SYSCTL_ADD_UQUAD(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "prp_page_alloc_fail", CTLFLAG_RD,
&sc->prp_page_alloc_fail, "PRP page allocation failures");
}
static struct mpr_debug_string {
char *name;
int flag;
} mpr_debug_strings[] = {
{"info", MPR_INFO},
{"fault", MPR_FAULT},
{"event", MPR_EVENT},
{"log", MPR_LOG},
{"recovery", MPR_RECOVERY},
{"error", MPR_ERROR},
{"init", MPR_INIT},
{"xinfo", MPR_XINFO},
{"user", MPR_USER},
{"mapping", MPR_MAPPING},
{"trace", MPR_TRACE}
};
enum mpr_debug_level_combiner {
COMB_NONE,
COMB_ADD,
COMB_SUB
};
static int
mpr_debug_sysctl(SYSCTL_HANDLER_ARGS)
{
struct mpr_softc *sc;
struct mpr_debug_string *string;
struct sbuf *sbuf;
char *buffer;
size_t sz;
int i, len, debug, error;
sc = (struct mpr_softc *)arg1;
error = sysctl_wire_old_buffer(req, 0);
if (error != 0)
return (error);
sbuf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
debug = sc->mpr_debug;
sbuf_printf(sbuf, "%#x", debug);
sz = sizeof(mpr_debug_strings) / sizeof(mpr_debug_strings[0]);
for (i = 0; i < sz; i++) {
string = &mpr_debug_strings[i];
if (debug & string->flag)
sbuf_printf(sbuf, ",%s", string->name);
}
error = sbuf_finish(sbuf);
sbuf_delete(sbuf);
if (error || req->newptr == NULL)
return (error);
len = req->newlen - req->newidx;
if (len == 0)
return (0);
buffer = malloc(len, M_MPR, M_ZERO|M_WAITOK);
error = SYSCTL_IN(req, buffer, len);
mpr_parse_debug(sc, buffer);
free(buffer, M_MPR);
return (error);
}
static void
mpr_parse_debug(struct mpr_softc *sc, char *list)
{
struct mpr_debug_string *string;
enum mpr_debug_level_combiner op;
char *token, *endtoken;
size_t sz;
int flags, i;
if (list == NULL || *list == '\0')
return;
if (*list == '+') {
op = COMB_ADD;
list++;
} else if (*list == '-') {
op = COMB_SUB;
list++;
} else
op = COMB_NONE;
if (*list == '\0')
return;
flags = 0;
sz = sizeof(mpr_debug_strings) / sizeof(mpr_debug_strings[0]);
while ((token = strsep(&list, ":,")) != NULL) {
/* Handle integer flags */
flags |= strtol(token, &endtoken, 0);
if (token != endtoken)
continue;
/* Handle text flags */
for (i = 0; i < sz; i++) {
string = &mpr_debug_strings[i];
if (strcasecmp(token, string->name) == 0) {
flags |= string->flag;
break;
}
}
}
switch (op) {
case COMB_NONE:
sc->mpr_debug = flags;
break;
case COMB_ADD:
sc->mpr_debug |= flags;
break;
case COMB_SUB:
sc->mpr_debug &= (~flags);
break;
}
return;
}
struct mpr_dumpreq_hdr {
uint32_t smid;
uint32_t state;
uint32_t numframes;
uint32_t deschi;
uint32_t desclo;
};
static int
mpr_dump_reqs(SYSCTL_HANDLER_ARGS)
{
struct mpr_softc *sc;
struct mpr_chain *chain, *chain1;
struct mpr_command *cm;
struct mpr_dumpreq_hdr hdr;
struct sbuf *sb;
uint32_t smid, state;
int i, numreqs, error = 0;
sc = (struct mpr_softc *)arg1;
if ((error = priv_check(curthread, PRIV_DRIVER)) != 0) {
printf("priv check error %d\n", error);
return (error);
}
state = MPR_CM_STATE_INQUEUE;
smid = 1;
numreqs = sc->num_reqs;
if (req->newptr != NULL)
return (EINVAL);
if (smid == 0 || smid > sc->num_reqs)
return (EINVAL);
if (numreqs <= 0 || (numreqs + smid > sc->num_reqs))
numreqs = sc->num_reqs;
sb = sbuf_new_for_sysctl(NULL, NULL, 4096, req);
/* Best effort, no locking */
for (i = smid; i < numreqs; i++) {
cm = &sc->commands[i];
if (cm->cm_state != state)
continue;
hdr.smid = i;
hdr.state = cm->cm_state;
hdr.numframes = 1;
hdr.deschi = cm->cm_desc.Words.High;
hdr.desclo = cm->cm_desc.Words.Low;
TAILQ_FOREACH_SAFE(chain, &cm->cm_chain_list, chain_link,
chain1)
hdr.numframes++;
sbuf_bcat(sb, &hdr, sizeof(hdr));
sbuf_bcat(sb, cm->cm_req, 128);
TAILQ_FOREACH_SAFE(chain, &cm->cm_chain_list, chain_link,
chain1)
sbuf_bcat(sb, chain->chain, 128);
}
error = sbuf_finish(sb);
sbuf_delete(sb);
return (error);
}
int
mpr_attach(struct mpr_softc *sc)
{
int error;
MPR_FUNCTRACE(sc);
mpr_dprint(sc, MPR_INIT, "%s entered\n", __func__);
mtx_init(&sc->mpr_mtx, "MPR lock", NULL, MTX_DEF);
callout_init_mtx(&sc->periodic, &sc->mpr_mtx, 0);
callout_init_mtx(&sc->device_check_callout, &sc->mpr_mtx, 0);
TAILQ_INIT(&sc->event_list);
timevalclear(&sc->lastfail);
if ((error = mpr_transition_ready(sc)) != 0) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT,
"Failed to transition ready\n");
return (error);
}
sc->facts = malloc(sizeof(MPI2_IOC_FACTS_REPLY), M_MPR,
M_ZERO|M_NOWAIT);
if (!sc->facts) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT,
"Cannot allocate memory, exit\n");
return (ENOMEM);
}
/*
* Get IOC Facts and allocate all structures based on this information.
* A Diag Reset will also call mpr_iocfacts_allocate and re-read the IOC
* Facts. If relevant values have changed in IOC Facts, this function
* will free all of the memory based on IOC Facts and reallocate that
* memory. If this fails, any allocated memory should already be freed.
*/
if ((error = mpr_iocfacts_allocate(sc, TRUE)) != 0) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT, "IOC Facts allocation "
"failed with error %d\n", error);
return (error);
}
/* Start the periodic watchdog check on the IOC Doorbell */
mpr_periodic(sc);
/*
* The portenable will kick off discovery events that will drive the
* rest of the initialization process. The CAM/SAS module will
* hold up the boot sequence until discovery is complete.
*/
sc->mpr_ich.ich_func = mpr_startup;
sc->mpr_ich.ich_arg = sc;
if (config_intrhook_establish(&sc->mpr_ich) != 0) {
mpr_dprint(sc, MPR_INIT|MPR_ERROR,
"Cannot establish MPR config hook\n");
error = EINVAL;
}
/*
* Allow IR to shutdown gracefully when shutdown occurs.
*/
sc->shutdown_eh = EVENTHANDLER_REGISTER(shutdown_final,
mprsas_ir_shutdown, sc, SHUTDOWN_PRI_DEFAULT);
if (sc->shutdown_eh == NULL)
mpr_dprint(sc, MPR_INIT|MPR_ERROR,
"shutdown event registration failed\n");
mpr_setup_sysctl(sc);
sc->mpr_flags |= MPR_FLAGS_ATTACH_DONE;
mpr_dprint(sc, MPR_INIT, "%s exit error= %d\n", __func__, error);
return (error);
}
/* Run through any late-start handlers. */
static void
mpr_startup(void *arg)
{
struct mpr_softc *sc;
sc = (struct mpr_softc *)arg;
mpr_dprint(sc, MPR_INIT, "%s entered\n", __func__);
mpr_lock(sc);
mpr_unmask_intr(sc);
/* initialize device mapping tables */
mpr_base_static_config_pages(sc);
mpr_mapping_initialize(sc);
mprsas_startup(sc);
mpr_unlock(sc);
mpr_dprint(sc, MPR_INIT, "disestablish config intrhook\n");
config_intrhook_disestablish(&sc->mpr_ich);
sc->mpr_ich.ich_arg = NULL;
mpr_dprint(sc, MPR_INIT, "%s exit\n", __func__);
}
/* Periodic watchdog. Is called with the driver lock already held. */
static void
mpr_periodic(void *arg)
{
struct mpr_softc *sc;
uint32_t db;
sc = (struct mpr_softc *)arg;
if (sc->mpr_flags & MPR_FLAGS_SHUTDOWN)
return;
db = mpr_regread(sc, MPI2_DOORBELL_OFFSET);
if ((db & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
if ((db & MPI2_DOORBELL_FAULT_CODE_MASK) ==
IFAULT_IOP_OVER_TEMP_THRESHOLD_EXCEEDED) {
panic("TEMPERATURE FAULT: STOPPING.");
}
mpr_dprint(sc, MPR_FAULT, "IOC Fault 0x%08x, Resetting\n", db);
mpr_reinit(sc);
}
callout_reset(&sc->periodic, MPR_PERIODIC_DELAY * hz, mpr_periodic, sc);
}
static void
mpr_log_evt_handler(struct mpr_softc *sc, uintptr_t data,
MPI2_EVENT_NOTIFICATION_REPLY *event)
{
MPI2_EVENT_DATA_LOG_ENTRY_ADDED *entry;
MPR_DPRINT_EVENT(sc, generic, event);
switch (event->Event) {
case MPI2_EVENT_LOG_DATA:
mpr_dprint(sc, MPR_EVENT, "MPI2_EVENT_LOG_DATA:\n");
if (sc->mpr_debug & MPR_EVENT)
hexdump(event->EventData, event->EventDataLength, NULL,
0);
break;
case MPI2_EVENT_LOG_ENTRY_ADDED:
entry = (MPI2_EVENT_DATA_LOG_ENTRY_ADDED *)event->EventData;
mpr_dprint(sc, MPR_EVENT, "MPI2_EVENT_LOG_ENTRY_ADDED event "
"0x%x Sequence %d:\n", entry->LogEntryQualifier,
entry->LogSequence);
break;
default:
break;
}
return;
}
static int
mpr_attach_log(struct mpr_softc *sc)
{
uint8_t events[16];
bzero(events, 16);
setbit(events, MPI2_EVENT_LOG_DATA);
setbit(events, MPI2_EVENT_LOG_ENTRY_ADDED);
mpr_register_events(sc, events, mpr_log_evt_handler, NULL,
&sc->mpr_log_eh);
return (0);
}
static int
mpr_detach_log(struct mpr_softc *sc)
{
if (sc->mpr_log_eh != NULL)
mpr_deregister_events(sc, sc->mpr_log_eh);
return (0);
}
/*
* Free all of the driver resources and detach submodules. Should be called
* without the lock held.
*/
int
mpr_free(struct mpr_softc *sc)
{
int error;
mpr_dprint(sc, MPR_INIT, "%s entered\n", __func__);
/* Turn off the watchdog */
mpr_lock(sc);
sc->mpr_flags |= MPR_FLAGS_SHUTDOWN;
mpr_unlock(sc);
/* Lock must not be held for this */
callout_drain(&sc->periodic);
callout_drain(&sc->device_check_callout);
if (((error = mpr_detach_log(sc)) != 0) ||
((error = mpr_detach_sas(sc)) != 0)) {
mpr_dprint(sc, MPR_INIT|MPR_FAULT, "failed to detach "
"subsystems, error= %d, exit\n", error);
return (error);
}
mpr_detach_user(sc);
/* Put the IOC back in the READY state. */
mpr_lock(sc);
if ((error = mpr_transition_ready(sc)) != 0) {
mpr_unlock(sc);
return (error);
}
mpr_unlock(sc);
if (sc->facts != NULL)
free(sc->facts, M_MPR);
/*
* Free all buffers that are based on IOC Facts. A Diag Reset may need
* to free these buffers too.
*/
mpr_iocfacts_free(sc);
if (sc->sysctl_tree != NULL)
sysctl_ctx_free(&sc->sysctl_ctx);
/* Deregister the shutdown function */
if (sc->shutdown_eh != NULL)
EVENTHANDLER_DEREGISTER(shutdown_final, sc->shutdown_eh);
mtx_destroy(&sc->mpr_mtx);
mpr_dprint(sc, MPR_INIT, "%s exit\n", __func__);
return (0);
}
static __inline void
mpr_complete_command(struct mpr_softc *sc, struct mpr_command *cm)
{
MPR_FUNCTRACE(sc);
if (cm == NULL) {
mpr_dprint(sc, MPR_ERROR, "Completing NULL command\n");
return;
}
cm->cm_state = MPR_CM_STATE_BUSY;
if (cm->cm_flags & MPR_CM_FLAGS_POLLED)
cm->cm_flags |= MPR_CM_FLAGS_COMPLETE;
if (cm->cm_complete != NULL) {
mpr_dprint(sc, MPR_TRACE,
"%s cm %p calling cm_complete %p data %p reply %p\n",
__func__, cm, cm->cm_complete, cm->cm_complete_data,
cm->cm_reply);
cm->cm_complete(sc, cm);
}
if (cm->cm_flags & MPR_CM_FLAGS_WAKEUP) {
mpr_dprint(sc, MPR_TRACE, "waking up %p\n", cm);
wakeup(cm);
}
if (sc->io_cmds_active != 0) {
sc->io_cmds_active--;
} else {
mpr_dprint(sc, MPR_ERROR, "Warning: io_cmds_active is "
"out of sync - resynching to 0\n");
}
}
static void
mpr_sas_log_info(struct mpr_softc *sc , u32 log_info)
{
union loginfo_type {
u32 loginfo;
struct {
u32 subcode:16;
u32 code:8;
u32 originator:4;
u32 bus_type:4;
} dw;
};
union loginfo_type sas_loginfo;
char *originator_str = NULL;
sas_loginfo.loginfo = log_info;
if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
return;
/* each nexus loss loginfo */
if (log_info == 0x31170000)
return;
/* eat the loginfos associated with task aborts */
if ((log_info == 30050000) || (log_info == 0x31140000) ||
(log_info == 0x31130000))
return;
switch (sas_loginfo.dw.originator) {
case 0:
originator_str = "IOP";
break;
case 1:
originator_str = "PL";
break;
case 2:
originator_str = "IR";
break;
}
mpr_dprint(sc, MPR_LOG, "log_info(0x%08x): originator(%s), "
"code(0x%02x), sub_code(0x%04x)\n", log_info, originator_str,
sas_loginfo.dw.code, sas_loginfo.dw.subcode);
}
static void
mpr_display_reply_info(struct mpr_softc *sc, uint8_t *reply)
{
MPI2DefaultReply_t *mpi_reply;
u16 sc_status;
mpi_reply = (MPI2DefaultReply_t*)reply;
sc_status = le16toh(mpi_reply->IOCStatus);
if (sc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
mpr_sas_log_info(sc, le32toh(mpi_reply->IOCLogInfo));
}
void
mpr_intr(void *data)
{
struct mpr_softc *sc;
uint32_t status;
sc = (struct mpr_softc *)data;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
/*
* Check interrupt status register to flush the bus. This is
* needed for both INTx interrupts and driver-driven polling
*/
status = mpr_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET);
if ((status & MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT) == 0)
return;
mpr_lock(sc);
mpr_intr_locked(data);
mpr_unlock(sc);
return;
}
/*
* In theory, MSI/MSIX interrupts shouldn't need to read any registers on the
* chip. Hopefully this theory is correct.
*/
void
mpr_intr_msi(void *data)
{
struct mpr_softc *sc;
sc = (struct mpr_softc *)data;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
mpr_lock(sc);
mpr_intr_locked(data);
mpr_unlock(sc);
return;
}
/*
* The locking is overly broad and simplistic, but easy to deal with for now.
*/
void
mpr_intr_locked(void *data)
{
MPI2_REPLY_DESCRIPTORS_UNION *desc;
MPI2_DIAG_RELEASE_REPLY *rel_rep;
mpr_fw_diagnostic_buffer_t *pBuffer;
struct mpr_softc *sc;
uint64_t tdesc;
struct mpr_command *cm = NULL;
uint8_t flags;
u_int pq;
sc = (struct mpr_softc *)data;
pq = sc->replypostindex;
mpr_dprint(sc, MPR_TRACE,
"%s sc %p starting with replypostindex %u\n",
__func__, sc, sc->replypostindex);
for ( ;; ) {
cm = NULL;
desc = &sc->post_queue[sc->replypostindex];
/*
* Copy and clear out the descriptor so that any reentry will
* immediately know that this descriptor has already been
* looked at. There is unfortunate casting magic because the
* MPI API doesn't have a cardinal 64bit type.
*/
tdesc = 0xffffffffffffffff;
tdesc = atomic_swap_64((uint64_t *)desc, tdesc);
desc = (MPI2_REPLY_DESCRIPTORS_UNION *)&tdesc;
flags = desc->Default.ReplyFlags &
MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
if ((flags == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) ||
(le32toh(desc->Words.High) == 0xffffffff))
break;
/* increment the replypostindex now, so that event handlers
* and cm completion handlers which decide to do a diag
* reset can zero it without it getting incremented again
* afterwards, and we break out of this loop on the next
* iteration since the reply post queue has been cleared to
* 0xFF and all descriptors look unused (which they are).
*/
if (++sc->replypostindex >= sc->pqdepth)
sc->replypostindex = 0;
switch (flags) {
case MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS:
case MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS:
case MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS:
cm = &sc->commands[le16toh(desc->SCSIIOSuccess.SMID)];
KASSERT(cm->cm_state == MPR_CM_STATE_INQUEUE,
("command not inqueue\n"));
cm->cm_state = MPR_CM_STATE_BUSY;
cm->cm_reply = NULL;
break;
case MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY:
{
uint32_t baddr;
uint8_t *reply;
/*
* Re-compose the reply address from the address
* sent back from the chip. The ReplyFrameAddress
* is the lower 32 bits of the physical address of
* particular reply frame. Convert that address to
* host format, and then use that to provide the
* offset against the virtual address base
* (sc->reply_frames).
*/
baddr = le32toh(desc->AddressReply.ReplyFrameAddress);
reply = sc->reply_frames +
(baddr - ((uint32_t)sc->reply_busaddr));
/*
* Make sure the reply we got back is in a valid
* range. If not, go ahead and panic here, since
* we'll probably panic as soon as we deference the
* reply pointer anyway.
*/
if ((reply < sc->reply_frames)
|| (reply > (sc->reply_frames +
(sc->fqdepth * sc->replyframesz)))) {
printf("%s: WARNING: reply %p out of range!\n",
__func__, reply);
printf("%s: reply_frames %p, fqdepth %d, "
"frame size %d\n", __func__,
sc->reply_frames, sc->fqdepth,
sc->replyframesz);
printf("%s: baddr %#x,\n", __func__, baddr);
/* LSI-TODO. See Linux Code for Graceful exit */
panic("Reply address out of range");
}
if (le16toh(desc->AddressReply.SMID) == 0) {
if (((MPI2_DEFAULT_REPLY *)reply)->Function ==
MPI2_FUNCTION_DIAG_BUFFER_POST) {
/*
* If SMID is 0 for Diag Buffer Post,
* this implies that the reply is due to
* a release function with a status that
* the buffer has been released. Set
* the buffer flags accordingly.
*/
rel_rep =
(MPI2_DIAG_RELEASE_REPLY *)reply;
if ((le16toh(rel_rep->IOCStatus) &
MPI2_IOCSTATUS_MASK) ==
MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED)
{
pBuffer =
&sc->fw_diag_buffer_list[
rel_rep->BufferType];
pBuffer->valid_data = TRUE;
pBuffer->owned_by_firmware =
FALSE;
pBuffer->immediate = FALSE;
}
} else
mpr_dispatch_event(sc, baddr,
(MPI2_EVENT_NOTIFICATION_REPLY *)
reply);
} else {
cm = &sc->commands[
le16toh(desc->AddressReply.SMID)];
if (cm->cm_state == MPR_CM_STATE_INQUEUE) {
cm->cm_reply = reply;
cm->cm_reply_data =
le32toh(desc->AddressReply.
ReplyFrameAddress);
} else {
mpr_dprint(sc, MPR_RECOVERY,
"Bad state for ADDRESS_REPLY status,"
" ignoring state %d cm %p\n",
cm->cm_state, cm);
}
}
break;
}
case MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS:
case MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER:
case MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS:
default:
/* Unhandled */
mpr_dprint(sc, MPR_ERROR, "Unhandled reply 0x%x\n",
desc->Default.ReplyFlags);
cm = NULL;
break;
}
if (cm != NULL) {
// Print Error reply frame
if (cm->cm_reply)
mpr_display_reply_info(sc,cm->cm_reply);
mpr_complete_command(sc, cm);
}
}
if (pq != sc->replypostindex) {
mpr_dprint(sc, MPR_TRACE, "%s sc %p writing postindex %d\n",
__func__, sc, sc->replypostindex);
mpr_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET,
sc->replypostindex);
}
return;
}
static void
mpr_dispatch_event(struct mpr_softc *sc, uintptr_t data,
MPI2_EVENT_NOTIFICATION_REPLY *reply)
{
struct mpr_event_handle *eh;
int event, handled = 0;
event = le16toh(reply->Event);
TAILQ_FOREACH(eh, &sc->event_list, eh_list) {
if (isset(eh->mask, event)) {
eh->callback(sc, data, reply);
handled++;
}
}
if (handled == 0)
mpr_dprint(sc, MPR_EVENT, "Unhandled event 0x%x\n",
le16toh(event));
/*
* This is the only place that the event/reply should be freed.
* Anything wanting to hold onto the event data should have
* already copied it into their own storage.
*/
mpr_free_reply(sc, data);
}
static void
mpr_reregister_events_complete(struct mpr_softc *sc, struct mpr_command *cm)
{
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if (cm->cm_reply)
MPR_DPRINT_EVENT(sc, generic,
(MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply);
mpr_free_command(sc, cm);
/* next, send a port enable */
mprsas_startup(sc);
}
/*
* For both register_events and update_events, the caller supplies a bitmap
* of events that it _wants_. These functions then turn that into a bitmask
* suitable for the controller.
*/
int
mpr_register_events(struct mpr_softc *sc, uint8_t *mask,
mpr_evt_callback_t *cb, void *data, struct mpr_event_handle **handle)
{
struct mpr_event_handle *eh;
int error = 0;
eh = malloc(sizeof(struct mpr_event_handle), M_MPR, M_WAITOK|M_ZERO);
if (!eh) {
mpr_dprint(sc, MPR_EVENT|MPR_ERROR,
"Cannot allocate event memory\n");
return (ENOMEM);
}
eh->callback = cb;
eh->data = data;
TAILQ_INSERT_TAIL(&sc->event_list, eh, eh_list);
if (mask != NULL)
error = mpr_update_events(sc, eh, mask);
*handle = eh;
return (error);
}
int
mpr_update_events(struct mpr_softc *sc, struct mpr_event_handle *handle,
uint8_t *mask)
{
MPI2_EVENT_NOTIFICATION_REQUEST *evtreq;
MPI2_EVENT_NOTIFICATION_REPLY *reply = NULL;
struct mpr_command *cm = NULL;
struct mpr_event_handle *eh;
int error, i;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if ((mask != NULL) && (handle != NULL))
bcopy(mask, &handle->mask[0], 16);
memset(sc->event_mask, 0xff, 16);
TAILQ_FOREACH(eh, &sc->event_list, eh_list) {
for (i = 0; i < 16; i++)
sc->event_mask[i] &= ~eh->mask[i];
}
if ((cm = mpr_alloc_command(sc)) == NULL)
return (EBUSY);
evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req;
evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
evtreq->MsgFlags = 0;
evtreq->SASBroadcastPrimitiveMasks = 0;
#ifdef MPR_DEBUG_ALL_EVENTS
{
u_char fullmask[16];
memset(fullmask, 0x00, 16);
bcopy(fullmask, (uint8_t *)&evtreq->EventMasks, 16);
}
#else
bcopy(sc->event_mask, (uint8_t *)&evtreq->EventMasks, 16);
#endif
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mpr_request_polled(sc, &cm);
if (cm != NULL)
reply = (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply;
if ((reply == NULL) ||
(reply->IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS)
error = ENXIO;
if (reply)
MPR_DPRINT_EVENT(sc, generic, reply);
mpr_dprint(sc, MPR_TRACE, "%s finished error %d\n", __func__, error);
if (cm != NULL)
mpr_free_command(sc, cm);
return (error);
}
static int
mpr_reregister_events(struct mpr_softc *sc)
{
MPI2_EVENT_NOTIFICATION_REQUEST *evtreq;
struct mpr_command *cm;
struct mpr_event_handle *eh;
int error, i;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
/* first, reregister events */
memset(sc->event_mask, 0xff, 16);
TAILQ_FOREACH(eh, &sc->event_list, eh_list) {
for (i = 0; i < 16; i++)
sc->event_mask[i] &= ~eh->mask[i];
}
if ((cm = mpr_alloc_command(sc)) == NULL)
return (EBUSY);
evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req;
evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
evtreq->MsgFlags = 0;
evtreq->SASBroadcastPrimitiveMasks = 0;
#ifdef MPR_DEBUG_ALL_EVENTS
{
u_char fullmask[16];
memset(fullmask, 0x00, 16);
bcopy(fullmask, (uint8_t *)&evtreq->EventMasks, 16);
}
#else
bcopy(sc->event_mask, (uint8_t *)&evtreq->EventMasks, 16);
#endif
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
cm->cm_complete = mpr_reregister_events_complete;
error = mpr_map_command(sc, cm);
mpr_dprint(sc, MPR_TRACE, "%s finished with error %d\n", __func__,
error);
return (error);
}
int
mpr_deregister_events(struct mpr_softc *sc, struct mpr_event_handle *handle)
{
TAILQ_REMOVE(&sc->event_list, handle, eh_list);
free(handle, M_MPR);
return (mpr_update_events(sc, NULL, NULL));
}
/**
* mpr_build_nvme_prp - This function is called for NVMe end devices to build a
* native SGL (NVMe PRP). The native SGL is built starting in the first PRP entry
* of the NVMe message (PRP1). If the data buffer is small enough to be described
* entirely using PRP1, then PRP2 is not used. If needed, PRP2 is used to
* describe a larger data buffer. If the data buffer is too large to describe
* using the two PRP entriess inside the NVMe message, then PRP1 describes the
* first data memory segment, and PRP2 contains a pointer to a PRP list located
* elsewhere in memory to describe the remaining data memory segments. The PRP
* list will be contiguous.
* The native SGL for NVMe devices is a Physical Region Page (PRP). A PRP
* consists of a list of PRP entries to describe a number of noncontigous
* physical memory segments as a single memory buffer, just as a SGL does. Note
* however, that this function is only used by the IOCTL call, so the memory
* given will be guaranteed to be contiguous. There is no need to translate
* non-contiguous SGL into a PRP in this case. All PRPs will describe contiguous
* space that is one page size each.
*
* Each NVMe message contains two PRP entries. The first (PRP1) either contains
* a PRP list pointer or a PRP element, depending upon the command. PRP2 contains
* the second PRP element if the memory being described fits within 2 PRP
* entries, or a PRP list pointer if the PRP spans more than two entries.
*
* A PRP list pointer contains the address of a PRP list, structured as a linear
* array of PRP entries. Each PRP entry in this list describes a segment of
* physical memory.
*
* Each 64-bit PRP entry comprises an address and an offset field. The address
* always points to the beginning of a PAGE_SIZE physical memory page, and the
* offset describes where within that page the memory segment begins. Only the
* first element in a PRP list may contain a non-zero offest, implying that all
* memory segments following the first begin at the start of a PAGE_SIZE page.
*
* Each PRP element normally describes a chunck of PAGE_SIZE physical memory,
* with exceptions for the first and last elements in the list. If the memory
* being described by the list begins at a non-zero offset within the first page,
* then the first PRP element will contain a non-zero offset indicating where the
* region begins within the page. The last memory segment may end before the end
* of the PAGE_SIZE segment, depending upon the overall size of the memory being
* described by the PRP list.
*
* Since PRP entries lack any indication of size, the overall data buffer length
* is used to determine where the end of the data memory buffer is located, and
* how many PRP entries are required to describe it.
*
* Returns nothing.
*/
void
mpr_build_nvme_prp(struct mpr_softc *sc, struct mpr_command *cm,
Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request, void *data,
uint32_t data_in_sz, uint32_t data_out_sz)
{
int prp_size = PRP_ENTRY_SIZE;
uint64_t *prp_entry, *prp1_entry, *prp2_entry;
uint64_t *prp_entry_phys, *prp_page, *prp_page_phys;
uint32_t offset, entry_len, page_mask_result, page_mask;
bus_addr_t paddr;
size_t length;
struct mpr_prp_page *prp_page_info = NULL;
/*
* Not all commands require a data transfer. If no data, just return
* without constructing any PRP.
*/
if (!data_in_sz && !data_out_sz)
return;
/*
* Set pointers to PRP1 and PRP2, which are in the NVMe command. PRP1 is
* located at a 24 byte offset from the start of the NVMe command. Then
* set the current PRP entry pointer to PRP1.
*/
prp1_entry = (uint64_t *)(nvme_encap_request->NVMe_Command +
NVME_CMD_PRP1_OFFSET);
prp2_entry = (uint64_t *)(nvme_encap_request->NVMe_Command +
NVME_CMD_PRP2_OFFSET);
prp_entry = prp1_entry;
/*
* For the PRP entries, use the specially allocated buffer of
* contiguous memory. PRP Page allocation failures should not happen
* because there should be enough PRP page buffers to account for the
* possible NVMe QDepth.
*/
prp_page_info = mpr_alloc_prp_page(sc);
KASSERT(prp_page_info != NULL, ("%s: There are no PRP Pages left to be "
"used for building a native NVMe SGL.\n", __func__));
prp_page = (uint64_t *)prp_page_info->prp_page;
prp_page_phys = (uint64_t *)(uintptr_t)prp_page_info->prp_page_busaddr;
/*
* Insert the allocated PRP page into the command's PRP page list. This
* will be freed when the command is freed.
*/
TAILQ_INSERT_TAIL(&cm->cm_prp_page_list, prp_page_info, prp_page_link);
/*
* Check if we are within 1 entry of a page boundary we don't want our
* first entry to be a PRP List entry.
*/
page_mask = PAGE_SIZE - 1;
page_mask_result = (uintptr_t)((uint8_t *)prp_page + prp_size) &
page_mask;
if (!page_mask_result)
{
/* Bump up to next page boundary. */
prp_page = (uint64_t *)((uint8_t *)prp_page + prp_size);
prp_page_phys = (uint64_t *)((uint8_t *)prp_page_phys +
prp_size);
}
/*
* Set PRP physical pointer, which initially points to the current PRP
* DMA memory page.
*/
prp_entry_phys = prp_page_phys;
/* Get physical address and length of the data buffer. */
paddr = (bus_addr_t)(uintptr_t)data;
if (data_in_sz)
length = data_in_sz;
else
length = data_out_sz;
/* Loop while the length is not zero. */
while (length)
{
/*
* Check if we need to put a list pointer here if we are at page
* boundary - prp_size (8 bytes).
*/
page_mask_result = (uintptr_t)((uint8_t *)prp_entry_phys +
prp_size) & page_mask;
if (!page_mask_result)
{
/*
* This is the last entry in a PRP List, so we need to
* put a PRP list pointer here. What this does is:
* - bump the current memory pointer to the next
* address, which will be the next full page.
* - set the PRP Entry to point to that page. This is
* now the PRP List pointer.
* - bump the PRP Entry pointer the start of the next
* page. Since all of this PRP memory is contiguous,
* no need to get a new page - it's just the next
* address.
*/
prp_entry_phys++;
*prp_entry =
htole64((uint64_t)(uintptr_t)prp_entry_phys);
prp_entry++;
}
/* Need to handle if entry will be part of a page. */
offset = (uint32_t)paddr & page_mask;
entry_len = PAGE_SIZE - offset;
if (prp_entry == prp1_entry)
{
/*
* Must fill in the first PRP pointer (PRP1) before
* moving on.
*/
*prp1_entry = htole64((uint64_t)paddr);
/*
* Now point to the second PRP entry within the
* command (PRP2).
*/
prp_entry = prp2_entry;
}
else if (prp_entry == prp2_entry)
{
/*
* Should the PRP2 entry be a PRP List pointer or just a
* regular PRP pointer? If there is more than one more
* page of data, must use a PRP List pointer.
*/
if (length > PAGE_SIZE)
{
/*
* PRP2 will contain a PRP List pointer because
* more PRP's are needed with this command. The
* list will start at the beginning of the
* contiguous buffer.
*/
*prp2_entry =
htole64(
(uint64_t)(uintptr_t)prp_entry_phys);
/*
* The next PRP Entry will be the start of the
* first PRP List.
*/
prp_entry = prp_page;
}
else
{
/*
* After this, the PRP Entries are complete.
* This command uses 2 PRP's and no PRP list.
*/
*prp2_entry = htole64((uint64_t)paddr);
}
}
else
{
/*
* Put entry in list and bump the addresses.
*
* After PRP1 and PRP2 are filled in, this will fill in
* all remaining PRP entries in a PRP List, one per each
* time through the loop.
*/
*prp_entry = htole64((uint64_t)paddr);
prp_entry++;
prp_entry_phys++;
}
/*
* Bump the phys address of the command's data buffer by the
* entry_len.
*/
paddr += entry_len;
/* Decrement length accounting for last partial page. */
if (entry_len > length)
length = 0;
else
length -= entry_len;
}
}
/*
* mpr_check_pcie_native_sgl - This function is called for PCIe end devices to
* determine if the driver needs to build a native SGL. If so, that native SGL
* is built in the contiguous buffers allocated especially for PCIe SGL
* creation. If the driver will not build a native SGL, return TRUE and a
* normal IEEE SGL will be built. Currently this routine supports NVMe devices
* only.
*
* Returns FALSE (0) if native SGL was built, TRUE (1) if no SGL was built.
*/
static int
mpr_check_pcie_native_sgl(struct mpr_softc *sc, struct mpr_command *cm,
bus_dma_segment_t *segs, int segs_left)
{
uint32_t i, sge_dwords, length, offset, entry_len;
uint32_t num_entries, buff_len = 0, sges_in_segment;
uint32_t page_mask, page_mask_result, *curr_buff;
uint32_t *ptr_sgl, *ptr_first_sgl, first_page_offset;
uint32_t first_page_data_size, end_residual;
uint64_t *msg_phys;
bus_addr_t paddr;
int build_native_sgl = 0, first_prp_entry;
int prp_size = PRP_ENTRY_SIZE;
Mpi25IeeeSgeChain64_t *main_chain_element = NULL;
struct mpr_prp_page *prp_page_info = NULL;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
/*
* Add up the sizes of each segment length to get the total transfer
* size, which will be checked against the Maximum Data Transfer Size.
* If the data transfer length exceeds the MDTS for this device, just
* return 1 so a normal IEEE SGL will be built. F/W will break the I/O
* up into multiple I/O's. [nvme_mdts = 0 means unlimited]
*/
for (i = 0; i < segs_left; i++)
buff_len += htole32(segs[i].ds_len);
if ((cm->cm_targ->MDTS > 0) && (buff_len > cm->cm_targ->MDTS))
return 1;
/* Create page_mask (to get offset within page) */
page_mask = PAGE_SIZE - 1;
/*
* Check if the number of elements exceeds the max number that can be
* put in the main message frame (H/W can only translate an SGL that
* is contained entirely in the main message frame).
*/
sges_in_segment = (sc->reqframesz -
offsetof(Mpi25SCSIIORequest_t, SGL)) / sizeof(MPI25_SGE_IO_UNION);
if (segs_left > sges_in_segment)
build_native_sgl = 1;
else
{
/*
* NVMe uses one PRP for each physical page (or part of physical
* page).
* if 4 pages or less then IEEE is OK
* if > 5 pages then we need to build a native SGL
* if > 4 and <= 5 pages, then check the physical address of
* the first SG entry, then if this first size in the page
* is >= the residual beyond 4 pages then use IEEE,
* otherwise use native SGL
*/
if (buff_len > (PAGE_SIZE * 5))
build_native_sgl = 1;
else if ((buff_len > (PAGE_SIZE * 4)) &&
(buff_len <= (PAGE_SIZE * 5)) )
{
msg_phys = (uint64_t *)(uintptr_t)segs[0].ds_addr;
first_page_offset =
((uint32_t)(uint64_t)(uintptr_t)msg_phys &
page_mask);
first_page_data_size = PAGE_SIZE - first_page_offset;
end_residual = buff_len % PAGE_SIZE;
/*
* If offset into first page pushes the end of the data
* beyond end of the 5th page, we need the extra PRP
* list.
*/
if (first_page_data_size < end_residual)
build_native_sgl = 1;
/*
* Check if first SG entry size is < residual beyond 4
* pages.
*/
if (htole32(segs[0].ds_len) <
(buff_len - (PAGE_SIZE * 4)))
build_native_sgl = 1;
}
}
/* check if native SGL is needed */
if (!build_native_sgl)
return 1;
/*
* Native SGL is needed.
* Put a chain element in main message frame that points to the first
* chain buffer.
*
* NOTE: The ChainOffset field must be 0 when using a chain pointer to
* a native SGL.
*/
/* Set main message chain element pointer */
main_chain_element = (pMpi25IeeeSgeChain64_t)cm->cm_sge;
/*
* For NVMe the chain element needs to be the 2nd SGL entry in the main
* message.
*/
main_chain_element = (Mpi25IeeeSgeChain64_t *)
((uint8_t *)main_chain_element + sizeof(MPI25_IEEE_SGE_CHAIN64));
/*
* For the PRP entries, use the specially allocated buffer of
* contiguous memory. PRP Page allocation failures should not happen
* because there should be enough PRP page buffers to account for the
* possible NVMe QDepth.
*/
prp_page_info = mpr_alloc_prp_page(sc);
KASSERT(prp_page_info != NULL, ("%s: There are no PRP Pages left to be "
"used for building a native NVMe SGL.\n", __func__));
curr_buff = (uint32_t *)prp_page_info->prp_page;
msg_phys = (uint64_t *)(uintptr_t)prp_page_info->prp_page_busaddr;
/*
* Insert the allocated PRP page into the command's PRP page list. This
* will be freed when the command is freed.
*/
TAILQ_INSERT_TAIL(&cm->cm_prp_page_list, prp_page_info, prp_page_link);
/*
* Check if we are within 1 entry of a page boundary we don't want our
* first entry to be a PRP List entry.
*/
page_mask_result = (uintptr_t)((uint8_t *)curr_buff + prp_size) &
page_mask;
if (!page_mask_result) {
/* Bump up to next page boundary. */
curr_buff = (uint32_t *)((uint8_t *)curr_buff + prp_size);
msg_phys = (uint64_t *)((uint8_t *)msg_phys + prp_size);
}
/* Fill in the chain element and make it an NVMe segment type. */
main_chain_element->Address.High =
htole32((uint32_t)((uint64_t)(uintptr_t)msg_phys >> 32));
main_chain_element->Address.Low =
htole32((uint32_t)(uintptr_t)msg_phys);
main_chain_element->NextChainOffset = 0;
main_chain_element->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP;
/* Set SGL pointer to start of contiguous PCIe buffer. */
ptr_sgl = curr_buff;
sge_dwords = 2;
num_entries = 0;
/*
* NVMe has a very convoluted PRP format. One PRP is required for each
* page or partial page. We need to split up OS SG entries if they are
* longer than one page or cross a page boundary. We also have to insert
* a PRP list pointer entry as the last entry in each physical page of
* the PRP list.
*
* NOTE: The first PRP "entry" is actually placed in the first SGL entry
* in the main message in IEEE 64 format. The 2nd entry in the main
* message is the chain element, and the rest of the PRP entries are
* built in the contiguous PCIe buffer.
*/
first_prp_entry = 1;
ptr_first_sgl = (uint32_t *)cm->cm_sge;
for (i = 0; i < segs_left; i++) {
/* Get physical address and length of this SG entry. */
paddr = segs[i].ds_addr;
length = segs[i].ds_len;
/*
* Check whether a given SGE buffer lies on a non-PAGED
* boundary if this is not the first page. If so, this is not
* expected so have FW build the SGL.
*/
if ((i != 0) && (((uint32_t)paddr & page_mask) != 0)) {
mpr_dprint(sc, MPR_ERROR, "Unaligned SGE while "
"building NVMe PRPs, low address is 0x%x\n",
(uint32_t)paddr);
return 1;
}
/* Apart from last SGE, if any other SGE boundary is not page
* aligned then it means that hole exists. Existence of hole
* leads to data corruption. So fallback to IEEE SGEs.
*/
if (i != (segs_left - 1)) {
if (((uint32_t)paddr + length) & page_mask) {
mpr_dprint(sc, MPR_ERROR, "Unaligned SGE "
"boundary while building NVMe PRPs, low "
"address: 0x%x and length: %u\n",
(uint32_t)paddr, length);
return 1;
}
}
/* Loop while the length is not zero. */
while (length) {
/*
* Check if we need to put a list pointer here if we are
* at page boundary - prp_size.
*/
page_mask_result = (uintptr_t)((uint8_t *)ptr_sgl +
prp_size) & page_mask;
if (!page_mask_result) {
/*
* Need to put a PRP list pointer here.
*/
msg_phys = (uint64_t *)((uint8_t *)msg_phys +
prp_size);
*ptr_sgl = htole32((uintptr_t)msg_phys);
*(ptr_sgl+1) = htole32((uint64_t)(uintptr_t)
msg_phys >> 32);
ptr_sgl += sge_dwords;
num_entries++;
}
/* Need to handle if entry will be part of a page. */
offset = (uint32_t)paddr & page_mask;
entry_len = PAGE_SIZE - offset;
if (first_prp_entry) {
/*
* Put IEEE entry in first SGE in main message.
* (Simple element, System addr, not end of
* list.)
*/
*ptr_first_sgl = htole32((uint32_t)paddr);
*(ptr_first_sgl + 1) =
htole32((uint32_t)((uint64_t)paddr >> 32));
*(ptr_first_sgl + 2) = htole32(entry_len);
*(ptr_first_sgl + 3) = 0;
/* No longer the first PRP entry. */
first_prp_entry = 0;
} else {
/* Put entry in list. */
*ptr_sgl = htole32((uint32_t)paddr);
*(ptr_sgl + 1) =
htole32((uint32_t)((uint64_t)paddr >> 32));
/* Bump ptr_sgl, msg_phys, and num_entries. */
ptr_sgl += sge_dwords;
msg_phys = (uint64_t *)((uint8_t *)msg_phys +
prp_size);
num_entries++;
}
/* Bump the phys address by the entry_len. */
paddr += entry_len;
/* Decrement length accounting for last partial page. */
if (entry_len > length)
length = 0;
else
length -= entry_len;
}
}
/* Set chain element Length. */
main_chain_element->Length = htole32(num_entries * prp_size);
/* Return 0, indicating we built a native SGL. */
return 0;
}
/*
* Add a chain element as the next SGE for the specified command.
* Reset cm_sge and cm_sgesize to indicate all the available space. Chains are
* only required for IEEE commands. Therefore there is no code for commands
* that have the MPR_CM_FLAGS_SGE_SIMPLE flag set (and those commands
* shouldn't be requesting chains).
*/
static int
mpr_add_chain(struct mpr_command *cm, int segsleft)
{
struct mpr_softc *sc = cm->cm_sc;
MPI2_REQUEST_HEADER *req;
MPI25_IEEE_SGE_CHAIN64 *ieee_sgc;
struct mpr_chain *chain;
int sgc_size, current_segs, rem_segs, segs_per_frame;
uint8_t next_chain_offset = 0;
/*
* Fail if a command is requesting a chain for SIMPLE SGE's. For SAS3
* only IEEE commands should be requesting chains. Return some error
* code other than 0.
*/
if (cm->cm_flags & MPR_CM_FLAGS_SGE_SIMPLE) {
mpr_dprint(sc, MPR_ERROR, "A chain element cannot be added to "
"an MPI SGL.\n");
return(ENOBUFS);
}
sgc_size = sizeof(MPI25_IEEE_SGE_CHAIN64);
if (cm->cm_sglsize < sgc_size)
panic("MPR: Need SGE Error Code\n");
chain = mpr_alloc_chain(cm->cm_sc);
if (chain == NULL)
return (ENOBUFS);
/*
* Note: a double-linked list is used to make it easier to walk for
* debugging.
*/
TAILQ_INSERT_TAIL(&cm->cm_chain_list, chain, chain_link);
/*
* Need to know if the number of frames left is more than 1 or not. If
* more than 1 frame is required, NextChainOffset will need to be set,
* which will just be the last segment of the frame.
*/
rem_segs = 0;
if (cm->cm_sglsize < (sgc_size * segsleft)) {
/*
* rem_segs is the number of segements remaining after the
* segments that will go into the current frame. Since it is
* known that at least one more frame is required, account for
* the chain element. To know if more than one more frame is
* required, just check if there will be a remainder after using
* the current frame (with this chain) and the next frame. If
* so the NextChainOffset must be the last element of the next
* frame.
*/
current_segs = (cm->cm_sglsize / sgc_size) - 1;
rem_segs = segsleft - current_segs;
segs_per_frame = sc->chain_frame_size / sgc_size;
if (rem_segs > segs_per_frame) {
next_chain_offset = segs_per_frame - 1;
}
}
ieee_sgc = &((MPI25_SGE_IO_UNION *)cm->cm_sge)->IeeeChain;
ieee_sgc->Length = next_chain_offset ?
htole32((uint32_t)sc->chain_frame_size) :
htole32((uint32_t)rem_segs * (uint32_t)sgc_size);
ieee_sgc->NextChainOffset = next_chain_offset;
ieee_sgc->Flags = (MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR);
ieee_sgc->Address.Low = htole32(chain->chain_busaddr);
ieee_sgc->Address.High = htole32(chain->chain_busaddr >> 32);
cm->cm_sge = &((MPI25_SGE_IO_UNION *)chain->chain)->IeeeSimple;
req = (MPI2_REQUEST_HEADER *)cm->cm_req;
req->ChainOffset = (sc->chain_frame_size - sgc_size) >> 4;
cm->cm_sglsize = sc->chain_frame_size;
return (0);
}
/*
* Add one scatter-gather element to the scatter-gather list for a command.
* Maintain cm_sglsize and cm_sge as the remaining size and pointer to the
* next SGE to fill in, respectively. In Gen3, the MPI SGL does not have a
* chain, so don't consider any chain additions.
*/
int
mpr_push_sge(struct mpr_command *cm, MPI2_SGE_SIMPLE64 *sge, size_t len,
int segsleft)
{
uint32_t saved_buf_len, saved_address_low, saved_address_high;
u32 sge_flags;
/*
* case 1: >=1 more segment, no room for anything (error)
* case 2: 1 more segment and enough room for it
*/
if (cm->cm_sglsize < (segsleft * sizeof(MPI2_SGE_SIMPLE64))) {
mpr_dprint(cm->cm_sc, MPR_ERROR,
"%s: warning: Not enough room for MPI SGL in frame.\n",
__func__);
return(ENOBUFS);
}
KASSERT(segsleft == 1,
("segsleft cannot be more than 1 for an MPI SGL; segsleft = %d\n",
segsleft));
/*
* There is one more segment left to add for the MPI SGL and there is
* enough room in the frame to add it. This is the normal case because
* MPI SGL's don't have chains, otherwise something is wrong.
*
* If this is a bi-directional request, need to account for that
* here. Save the pre-filled sge values. These will be used
* either for the 2nd SGL or for a single direction SGL. If
* cm_out_len is non-zero, this is a bi-directional request, so
* fill in the OUT SGL first, then the IN SGL, otherwise just
* fill in the IN SGL. Note that at this time, when filling in
* 2 SGL's for a bi-directional request, they both use the same
* DMA buffer (same cm command).
*/
saved_buf_len = sge->FlagsLength & 0x00FFFFFF;
saved_address_low = sge->Address.Low;
saved_address_high = sge->Address.High;
if (cm->cm_out_len) {
sge->FlagsLength = cm->cm_out_len |
((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_HOST_TO_IOC |
MPI2_SGE_FLAGS_64_BIT_ADDRESSING) <<
MPI2_SGE_FLAGS_SHIFT);
cm->cm_sglsize -= len;
/* Endian Safe code */
sge_flags = sge->FlagsLength;
sge->FlagsLength = htole32(sge_flags);
sge->Address.High = htole32(sge->Address.High);
sge->Address.Low = htole32(sge->Address.Low);
bcopy(sge, cm->cm_sge, len);
cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len);
}
sge->FlagsLength = saved_buf_len |
((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_LAST_ELEMENT |
MPI2_SGE_FLAGS_END_OF_LIST |
MPI2_SGE_FLAGS_64_BIT_ADDRESSING) <<
MPI2_SGE_FLAGS_SHIFT);
if (cm->cm_flags & MPR_CM_FLAGS_DATAIN) {
sge->FlagsLength |=
((uint32_t)(MPI2_SGE_FLAGS_IOC_TO_HOST) <<
MPI2_SGE_FLAGS_SHIFT);
} else {
sge->FlagsLength |=
((uint32_t)(MPI2_SGE_FLAGS_HOST_TO_IOC) <<
MPI2_SGE_FLAGS_SHIFT);
}
sge->Address.Low = saved_address_low;
sge->Address.High = saved_address_high;
cm->cm_sglsize -= len;
/* Endian Safe code */
sge_flags = sge->FlagsLength;
sge->FlagsLength = htole32(sge_flags);
sge->Address.High = htole32(sge->Address.High);
sge->Address.Low = htole32(sge->Address.Low);
bcopy(sge, cm->cm_sge, len);
cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len);
return (0);
}
/*
* Add one IEEE scatter-gather element (chain or simple) to the IEEE scatter-
* gather list for a command. Maintain cm_sglsize and cm_sge as the
* remaining size and pointer to the next SGE to fill in, respectively.
*/
int
mpr_push_ieee_sge(struct mpr_command *cm, void *sgep, int segsleft)
{
MPI2_IEEE_SGE_SIMPLE64 *sge = sgep;
int error, ieee_sge_size = sizeof(MPI25_SGE_IO_UNION);
uint32_t saved_buf_len, saved_address_low, saved_address_high;
uint32_t sge_length;
/*
* case 1: No room for chain or segment (error).
* case 2: Two or more segments left but only room for chain.
* case 3: Last segment and room for it, so set flags.
*/
/*
* There should be room for at least one element, or there is a big
* problem.
*/
if (cm->cm_sglsize < ieee_sge_size)
panic("MPR: Need SGE Error Code\n");
if ((segsleft >= 2) && (cm->cm_sglsize < (ieee_sge_size * 2))) {
if ((error = mpr_add_chain(cm, segsleft)) != 0)
return (error);
}
if (segsleft == 1) {
/*
* If this is a bi-directional request, need to account for that
* here. Save the pre-filled sge values. These will be used
* either for the 2nd SGL or for a single direction SGL. If
* cm_out_len is non-zero, this is a bi-directional request, so
* fill in the OUT SGL first, then the IN SGL, otherwise just
* fill in the IN SGL. Note that at this time, when filling in
* 2 SGL's for a bi-directional request, they both use the same
* DMA buffer (same cm command).
*/
saved_buf_len = sge->Length;
saved_address_low = sge->Address.Low;
saved_address_high = sge->Address.High;
if (cm->cm_out_len) {
sge->Length = cm->cm_out_len;
sge->Flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR);
cm->cm_sglsize -= ieee_sge_size;
/* Endian Safe code */
sge_length = sge->Length;
sge->Length = htole32(sge_length);
sge->Address.High = htole32(sge->Address.High);
sge->Address.Low = htole32(sge->Address.Low);
bcopy(sgep, cm->cm_sge, ieee_sge_size);
cm->cm_sge =
(MPI25_SGE_IO_UNION *)((uintptr_t)cm->cm_sge +
ieee_sge_size);
}
sge->Length = saved_buf_len;
sge->Flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
MPI25_IEEE_SGE_FLAGS_END_OF_LIST);
sge->Address.Low = saved_address_low;
sge->Address.High = saved_address_high;
}
cm->cm_sglsize -= ieee_sge_size;
/* Endian Safe code */
sge_length = sge->Length;
sge->Length = htole32(sge_length);
sge->Address.High = htole32(sge->Address.High);
sge->Address.Low = htole32(sge->Address.Low);
bcopy(sgep, cm->cm_sge, ieee_sge_size);
cm->cm_sge = (MPI25_SGE_IO_UNION *)((uintptr_t)cm->cm_sge +
ieee_sge_size);
return (0);
}
/*
* Add one dma segment to the scatter-gather list for a command.
*/
int
mpr_add_dmaseg(struct mpr_command *cm, vm_paddr_t pa, size_t len, u_int flags,
int segsleft)
{
MPI2_SGE_SIMPLE64 sge;
MPI2_IEEE_SGE_SIMPLE64 ieee_sge;
if (!(cm->cm_flags & MPR_CM_FLAGS_SGE_SIMPLE)) {
ieee_sge.Flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR);
ieee_sge.Length = len;
mpr_from_u64(pa, &ieee_sge.Address);
return (mpr_push_ieee_sge(cm, &ieee_sge, segsleft));
} else {
/*
* This driver always uses 64-bit address elements for
* simplicity.
*/
flags |= MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_64_BIT_ADDRESSING;
/* Set Endian safe macro in mpr_push_sge */
sge.FlagsLength = len | (flags << MPI2_SGE_FLAGS_SHIFT);
mpr_from_u64(pa, &sge.Address);
return (mpr_push_sge(cm, &sge, sizeof sge, segsleft));
}
}
static void
mpr_data_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
struct mpr_softc *sc;
struct mpr_command *cm;
u_int i, dir, sflags;
cm = (struct mpr_command *)arg;
sc = cm->cm_sc;
/*
* In this case, just print out a warning and let the chip tell the
* user they did the wrong thing.
*/
if ((cm->cm_max_segs != 0) && (nsegs > cm->cm_max_segs)) {
mpr_dprint(sc, MPR_ERROR, "%s: warning: busdma returned %d "
"segments, more than the %d allowed\n", __func__, nsegs,
cm->cm_max_segs);
}
/*
* Set up DMA direction flags. Bi-directional requests are also handled
* here. In that case, both direction flags will be set.
*/
sflags = 0;
if (cm->cm_flags & MPR_CM_FLAGS_SMP_PASS) {
/*
* We have to add a special case for SMP passthrough, there
* is no easy way to generically handle it. The first
* S/G element is used for the command (therefore the
* direction bit needs to be set). The second one is used
* for the reply. We'll leave it to the caller to make
* sure we only have two buffers.
*/
/*
* Even though the busdma man page says it doesn't make
* sense to have both direction flags, it does in this case.
* We have one s/g element being accessed in each direction.
*/
dir = BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD;
/*
* Set the direction flag on the first buffer in the SMP
* passthrough request. We'll clear it for the second one.
*/
sflags |= MPI2_SGE_FLAGS_DIRECTION |
MPI2_SGE_FLAGS_END_OF_BUFFER;
} else if (cm->cm_flags & MPR_CM_FLAGS_DATAOUT) {
sflags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
dir = BUS_DMASYNC_PREWRITE;
} else
dir = BUS_DMASYNC_PREREAD;
/* Check if a native SG list is needed for an NVMe PCIe device. */
if (cm->cm_targ && cm->cm_targ->is_nvme &&
mpr_check_pcie_native_sgl(sc, cm, segs, nsegs) == 0) {
/* A native SG list was built, skip to end. */
goto out;
}
for (i = 0; i < nsegs; i++) {
if ((cm->cm_flags & MPR_CM_FLAGS_SMP_PASS) && (i != 0)) {
sflags &= ~MPI2_SGE_FLAGS_DIRECTION;
}
error = mpr_add_dmaseg(cm, segs[i].ds_addr, segs[i].ds_len,
sflags, nsegs - i);
if (error != 0) {
/* Resource shortage, roll back! */
if (ratecheck(&sc->lastfail, &mpr_chainfail_interval))
mpr_dprint(sc, MPR_INFO, "Out of chain frames, "
"consider increasing hw.mpr.max_chains.\n");
cm->cm_flags |= MPR_CM_FLAGS_CHAIN_FAILED;
mpr_complete_command(sc, cm);
return;
}
}
out:
bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir);
mpr_enqueue_request(sc, cm);
return;
}
static void
mpr_data_cb2(void *arg, bus_dma_segment_t *segs, int nsegs, bus_size_t mapsize,
int error)
{
mpr_data_cb(arg, segs, nsegs, error);
}
/*
* This is the routine to enqueue commands ansynchronously.
* Note that the only error path here is from bus_dmamap_load(), which can
* return EINPROGRESS if it is waiting for resources. Other than this, it's
* assumed that if you have a command in-hand, then you have enough credits
* to use it.
*/
int
mpr_map_command(struct mpr_softc *sc, struct mpr_command *cm)
{
int error = 0;
if (cm->cm_flags & MPR_CM_FLAGS_USE_UIO) {
error = bus_dmamap_load_uio(sc->buffer_dmat, cm->cm_dmamap,
&cm->cm_uio, mpr_data_cb2, cm, 0);
} else if (cm->cm_flags & MPR_CM_FLAGS_USE_CCB) {
error = bus_dmamap_load_ccb(sc->buffer_dmat, cm->cm_dmamap,
cm->cm_data, mpr_data_cb, cm, 0);
} else if ((cm->cm_data != NULL) && (cm->cm_length != 0)) {
error = bus_dmamap_load(sc->buffer_dmat, cm->cm_dmamap,
cm->cm_data, cm->cm_length, mpr_data_cb, cm, 0);
} else {
/* Add a zero-length element as needed */
if (cm->cm_sge != NULL)
mpr_add_dmaseg(cm, 0, 0, 0, 1);
mpr_enqueue_request(sc, cm);
}
return (error);
}
/*
* This is the routine to enqueue commands synchronously. An error of
* EINPROGRESS from mpr_map_command() is ignored since the command will
* be executed and enqueued automatically. Other errors come from msleep().
*/
int
mpr_wait_command(struct mpr_softc *sc, struct mpr_command **cmp, int timeout,
int sleep_flag)
{
int error, rc;
struct timeval cur_time, start_time;
struct mpr_command *cm = *cmp;
if (sc->mpr_flags & MPR_FLAGS_DIAGRESET)
return EBUSY;
cm->cm_complete = NULL;
cm->cm_flags |= (MPR_CM_FLAGS_WAKEUP + MPR_CM_FLAGS_POLLED);
error = mpr_map_command(sc, cm);
if ((error != 0) && (error != EINPROGRESS))
return (error);
// Check for context and wait for 50 mSec at a time until time has
// expired or the command has finished. If msleep can't be used, need
// to poll.
if (curthread->td_no_sleeping)
sleep_flag = NO_SLEEP;
getmicrouptime(&start_time);
if (mtx_owned(&sc->mpr_mtx) && sleep_flag == CAN_SLEEP) {
error = msleep(cm, &sc->mpr_mtx, 0, "mprwait", timeout*hz);
if (error == EWOULDBLOCK) {
/*
* Record the actual elapsed time in the case of a
* timeout for the message below.
*/
getmicrouptime(&cur_time);
timevalsub(&cur_time, &start_time);
}
} else {
while ((cm->cm_flags & MPR_CM_FLAGS_COMPLETE) == 0) {
mpr_intr_locked(sc);
if (sleep_flag == CAN_SLEEP)
pause("mprwait", hz/20);
else
DELAY(50000);
getmicrouptime(&cur_time);
timevalsub(&cur_time, &start_time);
if (cur_time.tv_sec > timeout) {
error = EWOULDBLOCK;
break;
}
}
}
if (error == EWOULDBLOCK) {
if (cm->cm_timeout_handler == NULL) {
mpr_dprint(sc, MPR_FAULT, "Calling Reinit from %s, timeout=%d,"
" elapsed=%jd\n", __func__, timeout,
(intmax_t)cur_time.tv_sec);
rc = mpr_reinit(sc);
mpr_dprint(sc, MPR_FAULT, "Reinit %s\n", (rc == 0) ? "success" :
"failed");
} else
cm->cm_timeout_handler(sc, cm);
if (sc->mpr_flags & MPR_FLAGS_REALLOCATED) {
/*
* Tell the caller that we freed the command in a
* reinit.
*/
*cmp = NULL;
}
error = ETIMEDOUT;
}
return (error);
}
/*
* This is the routine to enqueue a command synchonously and poll for
* completion. Its use should be rare.
*/
int
mpr_request_polled(struct mpr_softc *sc, struct mpr_command **cmp)
{
int error, rc;
struct timeval cur_time, start_time;
struct mpr_command *cm = *cmp;
error = 0;
cm->cm_flags |= MPR_CM_FLAGS_POLLED;
cm->cm_complete = NULL;
mpr_map_command(sc, cm);
getmicrouptime(&start_time);
while ((cm->cm_flags & MPR_CM_FLAGS_COMPLETE) == 0) {
mpr_intr_locked(sc);
if (mtx_owned(&sc->mpr_mtx))
msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0,
"mprpoll", hz/20);
else
pause("mprpoll", hz/20);
/*
* Check for real-time timeout and fail if more than 60 seconds.
*/
getmicrouptime(&cur_time);
timevalsub(&cur_time, &start_time);
if (cur_time.tv_sec > 60) {
mpr_dprint(sc, MPR_FAULT, "polling failed\n");
error = ETIMEDOUT;
break;
}
}
cm->cm_state = MPR_CM_STATE_BUSY;
if (error) {
mpr_dprint(sc, MPR_FAULT, "Calling Reinit from %s\n", __func__);
rc = mpr_reinit(sc);
mpr_dprint(sc, MPR_FAULT, "Reinit %s\n", (rc == 0) ? "success" :
"failed");
if (sc->mpr_flags & MPR_FLAGS_REALLOCATED) {
/*
* Tell the caller that we freed the command in a
* reinit.
*/
*cmp = NULL;
}
}
return (error);
}
/*
* The MPT driver had a verbose interface for config pages. In this driver,
* reduce it to much simpler terms, similar to the Linux driver.
*/
int
mpr_read_config_page(struct mpr_softc *sc, struct mpr_config_params *params)
{
MPI2_CONFIG_REQUEST *req;
struct mpr_command *cm;
int error;
if (sc->mpr_flags & MPR_FLAGS_BUSY) {
return (EBUSY);
}
cm = mpr_alloc_command(sc);
if (cm == NULL) {
return (EBUSY);
}
req = (MPI2_CONFIG_REQUEST *)cm->cm_req;
req->Function = MPI2_FUNCTION_CONFIG;
req->Action = params->action;
req->SGLFlags = 0;
req->ChainOffset = 0;
req->PageAddress = params->page_address;
if (params->hdr.Struct.PageType == MPI2_CONFIG_PAGETYPE_EXTENDED) {
MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr;
hdr = &params->hdr.Ext;
req->ExtPageType = hdr->ExtPageType;
req->ExtPageLength = hdr->ExtPageLength;
req->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
req->Header.PageLength = 0; /* Must be set to zero */
req->Header.PageNumber = hdr->PageNumber;
req->Header.PageVersion = hdr->PageVersion;
} else {
MPI2_CONFIG_PAGE_HEADER *hdr;
hdr = &params->hdr.Struct;
req->Header.PageType = hdr->PageType;
req->Header.PageNumber = hdr->PageNumber;
req->Header.PageLength = hdr->PageLength;
req->Header.PageVersion = hdr->PageVersion;
}
cm->cm_data = params->buffer;
cm->cm_length = params->length;
if (cm->cm_data != NULL) {
cm->cm_sge = &req->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN;
} else
cm->cm_sge = NULL;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_complete_data = params;
if (params->callback != NULL) {
cm->cm_complete = mpr_config_complete;
return (mpr_map_command(sc, cm));
} else {
error = mpr_wait_command(sc, &cm, 0, CAN_SLEEP);
if (error) {
mpr_dprint(sc, MPR_FAULT,
"Error %d reading config page\n", error);
if (cm != NULL)
mpr_free_command(sc, cm);
return (error);
}
mpr_config_complete(sc, cm);
}
return (0);
}
int
mpr_write_config_page(struct mpr_softc *sc, struct mpr_config_params *params)
{
return (EINVAL);
}
static void
mpr_config_complete(struct mpr_softc *sc, struct mpr_command *cm)
{
MPI2_CONFIG_REPLY *reply;
struct mpr_config_params *params;
MPR_FUNCTRACE(sc);
params = cm->cm_complete_data;
if (cm->cm_data != NULL) {
bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap);
}
/*
* XXX KDM need to do more error recovery? This results in the
* device in question not getting probed.
*/
if ((cm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
params->status = MPI2_IOCSTATUS_BUSY;
goto done;
}
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (reply == NULL) {
params->status = MPI2_IOCSTATUS_BUSY;
goto done;
}
params->status = reply->IOCStatus;
if (params->hdr.Struct.PageType == MPI2_CONFIG_PAGETYPE_EXTENDED) {
params->hdr.Ext.ExtPageType = reply->ExtPageType;
params->hdr.Ext.ExtPageLength = reply->ExtPageLength;
params->hdr.Ext.PageType = reply->Header.PageType;
params->hdr.Ext.PageNumber = reply->Header.PageNumber;
params->hdr.Ext.PageVersion = reply->Header.PageVersion;
} else {
params->hdr.Struct.PageType = reply->Header.PageType;
params->hdr.Struct.PageNumber = reply->Header.PageNumber;
params->hdr.Struct.PageLength = reply->Header.PageLength;
params->hdr.Struct.PageVersion = reply->Header.PageVersion;
}
done:
mpr_free_command(sc, cm);
if (params->callback != NULL)
params->callback(sc, params);
return;
}
Reference in New Issue View Git Blame Copy Permalink