freebsd-dev/sys/dev/gpio/gpiospi.c
Michael Zhilin d1c38239e8 [gpiospi] add clock delay to avoid smashing of bits
Submitted by:	Hiroki Mori <yamori83@yahoo.co.jp>
Reviewed by:	loos, ray, mizhka
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D8749
2016-12-13 10:03:29 +00:00

405 lines
9.9 KiB
C

/*-
* Copyright (c) 2011, Aleksandr Rybalko <ray@dlink.ua>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_gpio.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/sysctl.h>
#include <sys/gpio.h>
#include "gpiobus_if.h"
#include <dev/gpio/gpiobusvar.h>
#include <dev/spibus/spi.h>
#include <dev/spibus/spibusvar.h>
#include "spibus_if.h"
#ifdef GPIO_SPI_DEBUG
#define dprintf printf
#else
#define dprintf(x, arg...)
#endif /* GPIO_SPI_DEBUG */
struct gpio_spi_softc {
device_t sc_dev;
device_t sc_busdev;
int sc_freq;
uint8_t sc_sclk;
uint8_t sc_miso;
uint8_t sc_mosi;
uint8_t sc_cs0;
uint8_t sc_cs1;
uint8_t sc_cs2;
uint8_t sc_cs3;
};
static void gpio_spi_chip_activate(struct gpio_spi_softc *, int);
static void gpio_spi_chip_deactivate(struct gpio_spi_softc *, int);
static int
gpio_spi_probe(device_t dev)
{
device_set_desc(dev, "GPIO SPI bit-banging driver");
return (0);
}
static void
gpio_delay(struct gpio_spi_softc *sc)
{
int d;
d = sc->sc_freq / 1000000;
if (d == 0)
d = 1;
DELAY(d);
}
static int
gpio_spi_attach(device_t dev)
{
uint32_t value;
struct gpio_spi_softc *sc;
sc = device_get_softc(dev);
sc->sc_dev = dev;
sc->sc_busdev = device_get_parent(dev);
/* Required variables */
if (resource_int_value(device_get_name(dev),
device_get_unit(dev), "sclk", &value))
return (ENXIO);
sc->sc_sclk = value & 0xff;
if (resource_int_value(device_get_name(dev),
device_get_unit(dev), "mosi", &value))
return (ENXIO);
sc->sc_mosi = value & 0xff;
/* Handle no miso; we just never read back from the device */
if (resource_int_value(device_get_name(dev),
device_get_unit(dev), "miso", &value))
value = 0xff;
sc->sc_miso = value & 0xff;
if (resource_int_value(device_get_name(dev),
device_get_unit(dev), "cs0", &value))
return (ENXIO);
sc->sc_cs0 = value & 0xff;
/* Optional variables */
if (resource_int_value(device_get_name(dev),
device_get_unit(dev), "cs1", &value))
value = 0xff;
sc->sc_cs1 = value & 0xff;
if (resource_int_value(device_get_name(dev),
device_get_unit(dev), "cs2", &value))
value = 0xff;
sc->sc_cs2 = value & 0xff;
if (resource_int_value(device_get_name(dev),
device_get_unit(dev), "cs3", &value))
value = 0xff;
sc->sc_cs3 = value & 0xff;
/* Default to 100KHz */
if (resource_int_value(device_get_name(dev),
device_get_unit(dev), "freq", &value)) {
value = 100000;
}
sc->sc_freq = value;
if (bootverbose) {
device_printf(dev, "frequency: %d Hz\n",
sc->sc_freq);
device_printf(dev,
"Use GPIO pins: sclk=%d, mosi=%d, miso=%d, "
"cs0=%d, cs1=%d, cs2=%d, cs3=%d\n",
sc->sc_sclk, sc->sc_mosi, sc->sc_miso,
sc->sc_cs0, sc->sc_cs1, sc->sc_cs2, sc->sc_cs3);
}
/* Set directions */
GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_sclk,
GPIO_PIN_OUTPUT|GPIO_PIN_PULLDOWN);
GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_mosi,
GPIO_PIN_OUTPUT|GPIO_PIN_PULLDOWN);
if (sc->sc_miso != 0xff) {
GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_miso,
GPIO_PIN_INPUT|GPIO_PIN_PULLDOWN);
}
GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_cs0,
GPIO_PIN_OUTPUT|GPIO_PIN_PULLUP);
if (sc->sc_cs1 != 0xff)
GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_cs1,
GPIO_PIN_OUTPUT|GPIO_PIN_PULLUP);
if (sc->sc_cs2 != 0xff)
GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_cs2,
GPIO_PIN_OUTPUT|GPIO_PIN_PULLUP);
if (sc->sc_cs3 != 0xff)
GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_cs3,
GPIO_PIN_OUTPUT|GPIO_PIN_PULLUP);
gpio_spi_chip_deactivate(sc, -1);
device_add_child(dev, "spibus", -1);
return (bus_generic_attach(dev));
}
static int
gpio_spi_detach(device_t dev)
{
return (0);
}
static void
gpio_spi_chip_activate(struct gpio_spi_softc *sc, int cs)
{
/* called with locked gpiobus */
switch (cs) {
case 0:
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs0, 0);
break;
case 1:
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs1, 0);
break;
case 2:
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs2, 0);
break;
case 3:
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs3, 0);
break;
default:
device_printf(sc->sc_dev, "don't have CS%d\n", cs);
}
gpio_delay(sc);
}
static void
gpio_spi_chip_deactivate(struct gpio_spi_softc *sc, int cs)
{
/* called wth locked gpiobus */
/*
* Put CSx to high
*/
switch (cs) {
case -1:
/* All CS */
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs0, 1);
if (sc->sc_cs1 == 0xff) break;
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs1, 1);
if (sc->sc_cs2 == 0xff) break;
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs2, 1);
if (sc->sc_cs3 == 0xff) break;
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs3, 1);
break;
case 0:
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs0, 1);
break;
case 1:
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs1, 1);
break;
case 2:
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs2, 1);
break;
case 3:
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_cs3, 1);
break;
default:
device_printf(sc->sc_dev, "don't have CS%d\n", cs);
}
}
static uint8_t
gpio_spi_txrx(struct gpio_spi_softc *sc, int cs, int mode, uint8_t data)
{
uint32_t mask, out = 0;
unsigned int bit;
/* called with locked gpiobus */
for (mask = 0x80; mask > 0; mask >>= 1) {
if ((mode == SPIBUS_MODE_CPOL) ||
(mode == SPIBUS_MODE_CPHA)) {
/* If mode 1 or 2 */
/* first step */
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_mosi, (data & mask)?1:0);
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_sclk, 0);
gpio_delay(sc);
/* second step */
if (sc->sc_miso != 0xff) {
GPIOBUS_PIN_GET(sc->sc_busdev, sc->sc_dev,
sc->sc_miso, &bit);
out |= bit?mask:0;
}
/* Data captured */
gpio_delay(sc);
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_sclk, 1);
gpio_delay(sc);
} else {
/* If mode 0 or 3 */
/* first step */
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_mosi, (data & mask)?1:0);
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_sclk, 1);
gpio_delay(sc);
/* second step */
if (sc->sc_miso != 0xff) {
GPIOBUS_PIN_GET(sc->sc_busdev, sc->sc_dev,
sc->sc_miso, &bit);
out |= bit?mask:0;
}
/* Data captured */
gpio_delay(sc);
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_sclk, 0);
gpio_delay(sc);
}
}
return (out & 0xff);
}
static int
gpio_spi_transfer(device_t dev, device_t child, struct spi_command *cmd)
{
struct gpio_spi_softc *sc;
uint8_t *buf_in, *buf_out;
struct spibus_ivar *devi = SPIBUS_IVAR(child);
int i;
sc = device_get_softc(dev);
KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz,
("TX/RX command sizes should be equal"));
KASSERT(cmd->tx_data_sz == cmd->rx_data_sz,
("TX/RX data sizes should be equal"));
gpio_spi_chip_activate(sc, devi->cs);
/* Preset pins */
if ((devi->mode == SPIBUS_MODE_CPOL) ||
(devi->mode == SPIBUS_MODE_CPHA)) {
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_sclk, 1);
} else {
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_sclk, 0);
}
/*
* Transfer command
*/
buf_out = (uint8_t *)cmd->tx_cmd;
buf_in = (uint8_t *)cmd->rx_cmd;
for (i = 0; i < cmd->tx_cmd_sz; i++)
buf_in[i] = gpio_spi_txrx(sc, devi->cs, devi->mode, buf_out[i]);
/*
* Receive/transmit data (depends on command)
*/
buf_out = (uint8_t *)cmd->tx_data;
buf_in = (uint8_t *)cmd->rx_data;
for (i = 0; i < cmd->tx_data_sz; i++)
buf_in[i] = gpio_spi_txrx(sc, devi->cs, devi->mode, buf_out[i]);
/* Return pins to mode default */
if ((devi->mode == SPIBUS_MODE_CPOL) ||
(devi->mode == SPIBUS_MODE_CPHA)) {
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_sclk, 1);
} else {
GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
sc->sc_sclk, 0);
}
gpio_spi_chip_deactivate(sc, devi->cs);
return (0);
}
static device_method_t gpio_spi_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, gpio_spi_probe),
DEVMETHOD(device_attach, gpio_spi_attach),
DEVMETHOD(device_detach, gpio_spi_detach),
DEVMETHOD(spibus_transfer, gpio_spi_transfer),
{0, 0}
};
static driver_t gpio_spi_driver = {
"gpiospi",
gpio_spi_methods,
sizeof(struct gpio_spi_softc),
};
static devclass_t gpio_spi_devclass;
DRIVER_MODULE(gpiospi, gpiobus, gpio_spi_driver, gpio_spi_devclass, 0, 0);
DRIVER_MODULE(spibus, gpiospi, spibus_driver, spibus_devclass, 0, 0);
MODULE_DEPEND(spi, gpiospi, 1, 1, 1);
MODULE_DEPEND(gpiobus, gpiospi, 1, 1, 1);