a8083b9c0b
One of the fun issues with scanning has been how the existing
ANI values were programmed into the hardware when channels were
changed. If you're on a really crappy channel and ANI has made
you deaf then when you scan you continue to be deaf on all channels.
This code passes in a flag to startpcureceive which in AR5416 and later
is also used to enable ANI. This allows it to know if it's a normal
operation or a scan operation.
This fixes my situation at home where a temporary spot of a device
going deaf due to interference starts scanning and .. can't hear
anything until I restart.
Now, this isn't the full fix - ideally:
(a) all the ANI config and per-channel information would be migrated
to the shared HAL stuff and enabled for all of the NICs;
(b) when a station reassociates and some other error conditions
(like missed beacons, NF calibration failures, etc) a knob
to reset ANI parameters would likely help recovery.
But hey, I'm committing bits of code again! woo!
Tested:
* AR9344 (2G), STA operation
1703 lines
61 KiB
C
1703 lines
61 KiB
C
/*-
|
|
* SPDX-License-Identifier: ISC
|
|
*
|
|
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2002-2008 Atheros Communications, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _ATH_AH_H_
|
|
#define _ATH_AH_H_
|
|
/*
|
|
* Atheros Hardware Access Layer
|
|
*
|
|
* Clients of the HAL call ath_hal_attach to obtain a reference to an ath_hal
|
|
* structure for use with the device. Hardware-related operations that
|
|
* follow must call back into the HAL through interface, supplying the
|
|
* reference as the first parameter.
|
|
*/
|
|
|
|
#include "ah_osdep.h"
|
|
|
|
/*
|
|
* The maximum number of TX/RX chains supported.
|
|
* This is intended to be used by various statistics gathering operations
|
|
* (NF, RSSI, EVM).
|
|
*/
|
|
#define AH_MAX_CHAINS 3
|
|
#define AH_MIMO_MAX_EVM_PILOTS 6
|
|
|
|
/*
|
|
* __ahdecl is analogous to _cdecl; it defines the calling
|
|
* convention used within the HAL. For most systems this
|
|
* can just default to be empty and the compiler will (should)
|
|
* use _cdecl. For systems where _cdecl is not compatible this
|
|
* must be defined. See linux/ah_osdep.h for an example.
|
|
*/
|
|
#ifndef __ahdecl
|
|
#define __ahdecl
|
|
#endif
|
|
|
|
/*
|
|
* Status codes that may be returned by the HAL. Note that
|
|
* interfaces that return a status code set it only when an
|
|
* error occurs--i.e. you cannot check it for success.
|
|
*/
|
|
typedef enum {
|
|
HAL_OK = 0, /* No error */
|
|
HAL_ENXIO = 1, /* No hardware present */
|
|
HAL_ENOMEM = 2, /* Memory allocation failed */
|
|
HAL_EIO = 3, /* Hardware didn't respond as expected */
|
|
HAL_EEMAGIC = 4, /* EEPROM magic number invalid */
|
|
HAL_EEVERSION = 5, /* EEPROM version invalid */
|
|
HAL_EELOCKED = 6, /* EEPROM unreadable */
|
|
HAL_EEBADSUM = 7, /* EEPROM checksum invalid */
|
|
HAL_EEREAD = 8, /* EEPROM read problem */
|
|
HAL_EEBADMAC = 9, /* EEPROM mac address invalid */
|
|
HAL_EESIZE = 10, /* EEPROM size not supported */
|
|
HAL_EEWRITE = 11, /* Attempt to change write-locked EEPROM */
|
|
HAL_EINVAL = 12, /* Invalid parameter to function */
|
|
HAL_ENOTSUPP = 13, /* Hardware revision not supported */
|
|
HAL_ESELFTEST = 14, /* Hardware self-test failed */
|
|
HAL_EINPROGRESS = 15, /* Operation incomplete */
|
|
HAL_EEBADREG = 16, /* EEPROM invalid regulatory contents */
|
|
HAL_EEBADCC = 17, /* EEPROM invalid country code */
|
|
HAL_INV_PMODE = 18, /* Couldn't bring out of sleep state */
|
|
} HAL_STATUS;
|
|
|
|
typedef enum {
|
|
AH_FALSE = 0, /* NB: lots of code assumes false is zero */
|
|
AH_TRUE = 1,
|
|
} HAL_BOOL;
|
|
|
|
typedef enum {
|
|
HAL_CAP_REG_DMN = 0, /* current regulatory domain */
|
|
HAL_CAP_CIPHER = 1, /* hardware supports cipher */
|
|
HAL_CAP_TKIP_MIC = 2, /* handle TKIP MIC in hardware */
|
|
HAL_CAP_TKIP_SPLIT = 3, /* hardware TKIP uses split keys */
|
|
HAL_CAP_PHYCOUNTERS = 4, /* hardware PHY error counters */
|
|
HAL_CAP_DIVERSITY = 5, /* hardware supports fast diversity */
|
|
HAL_CAP_KEYCACHE_SIZE = 6, /* number of entries in key cache */
|
|
HAL_CAP_NUM_TXQUEUES = 7, /* number of hardware xmit queues */
|
|
HAL_CAP_VEOL = 9, /* hardware supports virtual EOL */
|
|
HAL_CAP_PSPOLL = 10, /* hardware has working PS-Poll support */
|
|
HAL_CAP_DIAG = 11, /* hardware diagnostic support */
|
|
HAL_CAP_COMPRESSION = 12, /* hardware supports compression */
|
|
HAL_CAP_BURST = 13, /* hardware supports packet bursting */
|
|
HAL_CAP_FASTFRAME = 14, /* hardware supoprts fast frames */
|
|
HAL_CAP_TXPOW = 15, /* global tx power limit */
|
|
HAL_CAP_TPC = 16, /* per-packet tx power control */
|
|
HAL_CAP_PHYDIAG = 17, /* hardware phy error diagnostic */
|
|
HAL_CAP_BSSIDMASK = 18, /* hardware supports bssid mask */
|
|
HAL_CAP_MCAST_KEYSRCH = 19, /* hardware has multicast key search */
|
|
HAL_CAP_TSF_ADJUST = 20, /* hardware has beacon tsf adjust */
|
|
/* 21 was HAL_CAP_XR */
|
|
HAL_CAP_WME_TKIPMIC = 22, /* hardware can support TKIP MIC when WMM is turned on */
|
|
/* 23 was HAL_CAP_CHAN_HALFRATE */
|
|
/* 24 was HAL_CAP_CHAN_QUARTERRATE */
|
|
HAL_CAP_RFSILENT = 25, /* hardware has rfsilent support */
|
|
HAL_CAP_TPC_ACK = 26, /* ack txpower with per-packet tpc */
|
|
HAL_CAP_TPC_CTS = 27, /* cts txpower with per-packet tpc */
|
|
HAL_CAP_11D = 28, /* 11d beacon support for changing cc */
|
|
HAL_CAP_PCIE_PS = 29,
|
|
HAL_CAP_HT = 30, /* hardware can support HT */
|
|
HAL_CAP_GTXTO = 31, /* hardware supports global tx timeout */
|
|
HAL_CAP_FAST_CC = 32, /* hardware supports fast channel change */
|
|
HAL_CAP_TX_CHAINMASK = 33, /* mask of TX chains supported */
|
|
HAL_CAP_RX_CHAINMASK = 34, /* mask of RX chains supported */
|
|
HAL_CAP_NUM_GPIO_PINS = 36, /* number of GPIO pins */
|
|
|
|
HAL_CAP_CST = 38, /* hardware supports carrier sense timeout */
|
|
HAL_CAP_RIFS_RX = 39,
|
|
HAL_CAP_RIFS_TX = 40,
|
|
HAL_CAP_FORCE_PPM = 41,
|
|
HAL_CAP_RTS_AGGR_LIMIT = 42, /* aggregation limit with RTS */
|
|
HAL_CAP_4ADDR_AGGR = 43, /* hardware is capable of 4addr aggregation */
|
|
HAL_CAP_DFS_DMN = 44, /* current DFS domain */
|
|
HAL_CAP_EXT_CHAN_DFS = 45, /* DFS support for extension channel */
|
|
HAL_CAP_COMBINED_RADAR_RSSI = 46, /* Is combined RSSI for radar accurate */
|
|
|
|
HAL_CAP_AUTO_SLEEP = 48, /* hardware can go to network sleep
|
|
automatically after waking up to receive TIM */
|
|
HAL_CAP_MBSSID_AGGR_SUPPORT = 49, /* Support for mBSSID Aggregation */
|
|
HAL_CAP_SPLIT_4KB_TRANS = 50, /* hardware supports descriptors straddling a 4k page boundary */
|
|
HAL_CAP_REG_FLAG = 51, /* Regulatory domain flags */
|
|
HAL_CAP_BB_RIFS_HANG = 52,
|
|
HAL_CAP_RIFS_RX_ENABLED = 53,
|
|
HAL_CAP_BB_DFS_HANG = 54,
|
|
|
|
HAL_CAP_RX_STBC = 58,
|
|
HAL_CAP_TX_STBC = 59,
|
|
|
|
HAL_CAP_BT_COEX = 60, /* hardware is capable of bluetooth coexistence */
|
|
HAL_CAP_DYNAMIC_SMPS = 61, /* Dynamic MIMO Power Save hardware support */
|
|
|
|
HAL_CAP_DS = 67, /* 2 stream */
|
|
HAL_CAP_BB_RX_CLEAR_STUCK_HANG = 68,
|
|
HAL_CAP_MAC_HANG = 69, /* can MAC hang */
|
|
HAL_CAP_MFP = 70, /* Management Frame Protection in hardware */
|
|
|
|
HAL_CAP_TS = 72, /* 3 stream */
|
|
|
|
HAL_CAP_ENHANCED_DMA_SUPPORT = 75, /* DMA FIFO support */
|
|
HAL_CAP_NUM_TXMAPS = 76, /* Number of buffers in a transmit descriptor */
|
|
HAL_CAP_TXDESCLEN = 77, /* Length of transmit descriptor */
|
|
HAL_CAP_TXSTATUSLEN = 78, /* Length of transmit status descriptor */
|
|
HAL_CAP_RXSTATUSLEN = 79, /* Length of transmit status descriptor */
|
|
HAL_CAP_RXFIFODEPTH = 80, /* Receive hardware FIFO depth */
|
|
HAL_CAP_RXBUFSIZE = 81, /* Receive Buffer Length */
|
|
HAL_CAP_NUM_MR_RETRIES = 82, /* limit on multirate retries */
|
|
HAL_CAP_OL_PWRCTRL = 84, /* Open loop TX power control */
|
|
HAL_CAP_SPECTRAL_SCAN = 90, /* Hardware supports spectral scan */
|
|
|
|
HAL_CAP_BB_PANIC_WATCHDOG = 92,
|
|
|
|
HAL_CAP_HT20_SGI = 96, /* hardware supports HT20 short GI */
|
|
|
|
HAL_CAP_LDPC = 99,
|
|
|
|
HAL_CAP_RXTSTAMP_PREC = 100, /* rx desc tstamp precision (bits) */
|
|
|
|
HAL_CAP_ANT_DIV_COMB = 105, /* Enable antenna diversity/combining */
|
|
HAL_CAP_PHYRESTART_CLR_WAR = 106, /* in some cases, clear phy restart to fix bb hang */
|
|
HAL_CAP_ENTERPRISE_MODE = 107, /* Enterprise mode features */
|
|
HAL_CAP_LDPCWAR = 108,
|
|
HAL_CAP_CHANNEL_SWITCH_TIME_USEC = 109, /* Channel change time, usec */
|
|
HAL_CAP_ENABLE_APM = 110, /* APM enabled */
|
|
HAL_CAP_PCIE_LCR_EXTSYNC_EN = 111,
|
|
HAL_CAP_PCIE_LCR_OFFSET = 112,
|
|
|
|
HAL_CAP_ENHANCED_DFS_SUPPORT = 117, /* hardware supports enhanced DFS */
|
|
HAL_CAP_MCI = 118,
|
|
HAL_CAP_SMARTANTENNA = 119,
|
|
HAL_CAP_TRAFFIC_FAST_RECOVER = 120,
|
|
HAL_CAP_TX_DIVERSITY = 121,
|
|
HAL_CAP_CRDC = 122,
|
|
|
|
/* The following are private to the FreeBSD HAL (224 onward) */
|
|
|
|
HAL_CAP_INTMIT = 229, /* interference mitigation */
|
|
HAL_CAP_RXORN_FATAL = 230, /* HAL_INT_RXORN treated as fatal */
|
|
HAL_CAP_BB_HANG = 235, /* can baseband hang */
|
|
HAL_CAP_INTRMASK = 237, /* bitmask of supported interrupts */
|
|
HAL_CAP_BSSIDMATCH = 238, /* hardware has disable bssid match */
|
|
HAL_CAP_STREAMS = 239, /* how many 802.11n spatial streams are available */
|
|
HAL_CAP_RXDESC_SELFLINK = 242, /* support a self-linked tail RX descriptor */
|
|
HAL_CAP_BB_READ_WAR = 244, /* baseband read WAR */
|
|
HAL_CAP_SERIALISE_WAR = 245, /* serialise register access on PCI */
|
|
HAL_CAP_ENFORCE_TXOP = 246, /* Enforce TXOP if supported */
|
|
HAL_CAP_RX_LNA_MIXING = 247, /* RX hardware uses LNA mixing */
|
|
HAL_CAP_DO_MYBEACON = 248, /* Supports HAL_RX_FILTER_MYBEACON */
|
|
HAL_CAP_TOA_LOCATIONING = 249, /* time of flight / arrival locationing */
|
|
HAL_CAP_TXTSTAMP_PREC = 250, /* tx desc tstamp precision (bits) */
|
|
} HAL_CAPABILITY_TYPE;
|
|
|
|
/*
|
|
* "States" for setting the LED. These correspond to
|
|
* the possible 802.11 operational states and there may
|
|
* be a many-to-one mapping between these states and the
|
|
* actual hardware state for the LED's (i.e. the hardware
|
|
* may have fewer states).
|
|
*/
|
|
typedef enum {
|
|
HAL_LED_INIT = 0,
|
|
HAL_LED_SCAN = 1,
|
|
HAL_LED_AUTH = 2,
|
|
HAL_LED_ASSOC = 3,
|
|
HAL_LED_RUN = 4
|
|
} HAL_LED_STATE;
|
|
|
|
/*
|
|
* Transmit queue types/numbers. These are used to tag
|
|
* each transmit queue in the hardware and to identify a set
|
|
* of transmit queues for operations such as start/stop dma.
|
|
*/
|
|
typedef enum {
|
|
HAL_TX_QUEUE_INACTIVE = 0, /* queue is inactive/unused */
|
|
HAL_TX_QUEUE_DATA = 1, /* data xmit q's */
|
|
HAL_TX_QUEUE_BEACON = 2, /* beacon xmit q */
|
|
HAL_TX_QUEUE_CAB = 3, /* "crap after beacon" xmit q */
|
|
HAL_TX_QUEUE_UAPSD = 4, /* u-apsd power save xmit q */
|
|
HAL_TX_QUEUE_PSPOLL = 5, /* power save poll xmit q */
|
|
HAL_TX_QUEUE_CFEND = 6,
|
|
HAL_TX_QUEUE_PAPRD = 7,
|
|
} HAL_TX_QUEUE;
|
|
|
|
#define HAL_NUM_TX_QUEUES 10 /* max possible # of queues */
|
|
|
|
/*
|
|
* Receive queue types. These are used to tag
|
|
* each transmit queue in the hardware and to identify a set
|
|
* of transmit queues for operations such as start/stop dma.
|
|
*/
|
|
typedef enum {
|
|
HAL_RX_QUEUE_HP = 0, /* high priority recv queue */
|
|
HAL_RX_QUEUE_LP = 1, /* low priority recv queue */
|
|
} HAL_RX_QUEUE;
|
|
|
|
#define HAL_NUM_RX_QUEUES 2 /* max possible # of queues */
|
|
|
|
#define HAL_TXFIFO_DEPTH 8 /* transmit fifo depth */
|
|
|
|
/*
|
|
* Transmit queue subtype. These map directly to
|
|
* WME Access Categories (except for UPSD). Refer
|
|
* to Table 5 of the WME spec.
|
|
*/
|
|
typedef enum {
|
|
HAL_WME_AC_BK = 0, /* background access category */
|
|
HAL_WME_AC_BE = 1, /* best effort access category*/
|
|
HAL_WME_AC_VI = 2, /* video access category */
|
|
HAL_WME_AC_VO = 3, /* voice access category */
|
|
HAL_WME_UPSD = 4, /* uplink power save */
|
|
} HAL_TX_QUEUE_SUBTYPE;
|
|
|
|
/*
|
|
* Transmit queue flags that control various
|
|
* operational parameters.
|
|
*/
|
|
typedef enum {
|
|
/*
|
|
* Per queue interrupt enables. When set the associated
|
|
* interrupt may be delivered for packets sent through
|
|
* the queue. Without these enabled no interrupts will
|
|
* be delivered for transmits through the queue.
|
|
*/
|
|
HAL_TXQ_TXOKINT_ENABLE = 0x0001, /* enable TXOK interrupt */
|
|
HAL_TXQ_TXERRINT_ENABLE = 0x0001, /* enable TXERR interrupt */
|
|
HAL_TXQ_TXDESCINT_ENABLE = 0x0002, /* enable TXDESC interrupt */
|
|
HAL_TXQ_TXEOLINT_ENABLE = 0x0004, /* enable TXEOL interrupt */
|
|
HAL_TXQ_TXURNINT_ENABLE = 0x0008, /* enable TXURN interrupt */
|
|
/*
|
|
* Enable hardware compression for packets sent through
|
|
* the queue. The compression buffer must be setup and
|
|
* packets must have a key entry marked in the tx descriptor.
|
|
*/
|
|
HAL_TXQ_COMPRESSION_ENABLE = 0x0010, /* enable h/w compression */
|
|
/*
|
|
* Disable queue when veol is hit or ready time expires.
|
|
* By default the queue is disabled only on reaching the
|
|
* physical end of queue (i.e. a null link ptr in the
|
|
* descriptor chain).
|
|
*/
|
|
HAL_TXQ_RDYTIME_EXP_POLICY_ENABLE = 0x0020,
|
|
/*
|
|
* Schedule frames on delivery of a DBA (DMA Beacon Alert)
|
|
* event. Frames will be transmitted only when this timer
|
|
* fires, e.g to transmit a beacon in ap or adhoc modes.
|
|
*/
|
|
HAL_TXQ_DBA_GATED = 0x0040, /* schedule based on DBA */
|
|
/*
|
|
* Each transmit queue has a counter that is incremented
|
|
* each time the queue is enabled and decremented when
|
|
* the list of frames to transmit is traversed (or when
|
|
* the ready time for the queue expires). This counter
|
|
* must be non-zero for frames to be scheduled for
|
|
* transmission. The following controls disable bumping
|
|
* this counter under certain conditions. Typically this
|
|
* is used to gate frames based on the contents of another
|
|
* queue (e.g. CAB traffic may only follow a beacon frame).
|
|
* These are meaningful only when frames are scheduled
|
|
* with a non-ASAP policy (e.g. DBA-gated).
|
|
*/
|
|
HAL_TXQ_CBR_DIS_QEMPTY = 0x0080, /* disable on this q empty */
|
|
HAL_TXQ_CBR_DIS_BEMPTY = 0x0100, /* disable on beacon q empty */
|
|
|
|
/*
|
|
* Fragment burst backoff policy. Normally the no backoff
|
|
* is done after a successful transmission, the next fragment
|
|
* is sent at SIFS. If this flag is set backoff is done
|
|
* after each fragment, regardless whether it was ack'd or
|
|
* not, after the backoff count reaches zero a normal channel
|
|
* access procedure is done before the next transmit (i.e.
|
|
* wait AIFS instead of SIFS).
|
|
*/
|
|
HAL_TXQ_FRAG_BURST_BACKOFF_ENABLE = 0x00800000,
|
|
/*
|
|
* Disable post-tx backoff following each frame.
|
|
*/
|
|
HAL_TXQ_BACKOFF_DISABLE = 0x00010000, /* disable post backoff */
|
|
/*
|
|
* DCU arbiter lockout control. This controls how
|
|
* lower priority tx queues are handled with respect to
|
|
* to a specific queue when multiple queues have frames
|
|
* to send. No lockout means lower priority queues arbitrate
|
|
* concurrently with this queue. Intra-frame lockout
|
|
* means lower priority queues are locked out until the
|
|
* current frame transmits (e.g. including backoffs and bursting).
|
|
* Global lockout means nothing lower can arbitrary so
|
|
* long as there is traffic activity on this queue (frames,
|
|
* backoff, etc).
|
|
*/
|
|
HAL_TXQ_ARB_LOCKOUT_INTRA = 0x00020000, /* intra-frame lockout */
|
|
HAL_TXQ_ARB_LOCKOUT_GLOBAL = 0x00040000, /* full lockout s */
|
|
|
|
HAL_TXQ_IGNORE_VIRTCOL = 0x00080000, /* ignore virt collisions */
|
|
HAL_TXQ_SEQNUM_INC_DIS = 0x00100000, /* disable seqnum increment */
|
|
} HAL_TX_QUEUE_FLAGS;
|
|
|
|
typedef struct {
|
|
uint32_t tqi_ver; /* hal TXQ version */
|
|
HAL_TX_QUEUE_SUBTYPE tqi_subtype; /* subtype if applicable */
|
|
HAL_TX_QUEUE_FLAGS tqi_qflags; /* flags (see above) */
|
|
uint32_t tqi_priority; /* (not used) */
|
|
uint32_t tqi_aifs; /* aifs */
|
|
uint32_t tqi_cwmin; /* cwMin */
|
|
uint32_t tqi_cwmax; /* cwMax */
|
|
uint16_t tqi_shretry; /* rts retry limit */
|
|
uint16_t tqi_lgretry; /* long retry limit (not used)*/
|
|
uint32_t tqi_cbrPeriod; /* CBR period (us) */
|
|
uint32_t tqi_cbrOverflowLimit; /* threshold for CBROVF int */
|
|
uint32_t tqi_burstTime; /* max burst duration (us) */
|
|
uint32_t tqi_readyTime; /* frame schedule time (us) */
|
|
uint32_t tqi_compBuf; /* comp buffer phys addr */
|
|
} HAL_TXQ_INFO;
|
|
|
|
#define HAL_TQI_NONVAL 0xffff
|
|
|
|
/* token to use for aifs, cwmin, cwmax */
|
|
#define HAL_TXQ_USEDEFAULT ((uint32_t) -1)
|
|
|
|
/* compression definitions */
|
|
#define HAL_COMP_BUF_MAX_SIZE 9216 /* 9K */
|
|
#define HAL_COMP_BUF_ALIGN_SIZE 512
|
|
|
|
/*
|
|
* Transmit packet types. This belongs in ah_desc.h, but
|
|
* is here so we can give a proper type to various parameters
|
|
* (and not require everyone include the file).
|
|
*
|
|
* NB: These values are intentionally assigned for
|
|
* direct use when setting up h/w descriptors.
|
|
*/
|
|
typedef enum {
|
|
HAL_PKT_TYPE_NORMAL = 0,
|
|
HAL_PKT_TYPE_ATIM = 1,
|
|
HAL_PKT_TYPE_PSPOLL = 2,
|
|
HAL_PKT_TYPE_BEACON = 3,
|
|
HAL_PKT_TYPE_PROBE_RESP = 4,
|
|
HAL_PKT_TYPE_CHIRP = 5,
|
|
HAL_PKT_TYPE_GRP_POLL = 6,
|
|
HAL_PKT_TYPE_AMPDU = 7,
|
|
} HAL_PKT_TYPE;
|
|
|
|
/* Rx Filter Frame Types */
|
|
typedef enum {
|
|
/*
|
|
* These bits correspond to AR_RX_FILTER for all chips.
|
|
* Not all bits are supported by all chips.
|
|
*/
|
|
HAL_RX_FILTER_UCAST = 0x00000001, /* Allow unicast frames */
|
|
HAL_RX_FILTER_MCAST = 0x00000002, /* Allow multicast frames */
|
|
HAL_RX_FILTER_BCAST = 0x00000004, /* Allow broadcast frames */
|
|
HAL_RX_FILTER_CONTROL = 0x00000008, /* Allow control frames */
|
|
HAL_RX_FILTER_BEACON = 0x00000010, /* Allow beacon frames */
|
|
HAL_RX_FILTER_PROM = 0x00000020, /* Promiscuous mode */
|
|
HAL_RX_FILTER_PROBEREQ = 0x00000080, /* Allow probe request frames */
|
|
HAL_RX_FILTER_PHYERR = 0x00000100, /* Allow phy errors */
|
|
HAL_RX_FILTER_MYBEACON = 0x00000200, /* Filter beacons other than mine */
|
|
HAL_RX_FILTER_COMPBAR = 0x00000400, /* Allow compressed BAR */
|
|
HAL_RX_FILTER_COMP_BA = 0x00000800, /* Allow compressed blockack */
|
|
HAL_RX_FILTER_PHYRADAR = 0x00002000, /* Allow phy radar errors */
|
|
HAL_RX_FILTER_PSPOLL = 0x00004000, /* Allow PS-POLL frames */
|
|
HAL_RX_FILTER_MCAST_BCAST_ALL = 0x00008000,
|
|
/* Allow all mcast/bcast frames */
|
|
|
|
/*
|
|
* Magic RX filter flags that aren't targeting hardware bits
|
|
* but instead the HAL sets individual bits - eg PHYERR will result
|
|
* in OFDM/CCK timing error frames being received.
|
|
*/
|
|
HAL_RX_FILTER_BSSID = 0x40000000, /* Disable BSSID match */
|
|
} HAL_RX_FILTER;
|
|
|
|
typedef enum {
|
|
HAL_PM_AWAKE = 0,
|
|
HAL_PM_FULL_SLEEP = 1,
|
|
HAL_PM_NETWORK_SLEEP = 2,
|
|
HAL_PM_UNDEFINED = 3
|
|
} HAL_POWER_MODE;
|
|
|
|
/*
|
|
* Enterprise mode flags
|
|
*/
|
|
#define AH_ENT_DUAL_BAND_DISABLE 0x00000001
|
|
#define AH_ENT_CHAIN2_DISABLE 0x00000002
|
|
#define AH_ENT_5MHZ_DISABLE 0x00000004
|
|
#define AH_ENT_10MHZ_DISABLE 0x00000008
|
|
#define AH_ENT_49GHZ_DISABLE 0x00000010
|
|
#define AH_ENT_LOOPBACK_DISABLE 0x00000020
|
|
#define AH_ENT_TPC_PERF_DISABLE 0x00000040
|
|
#define AH_ENT_MIN_PKT_SIZE_DISABLE 0x00000080
|
|
#define AH_ENT_SPECTRAL_PRECISION 0x00000300
|
|
#define AH_ENT_SPECTRAL_PRECISION_S 8
|
|
#define AH_ENT_RTSCTS_DELIM_WAR 0x00010000
|
|
|
|
#define AH_FIRST_DESC_NDELIMS 60
|
|
|
|
/*
|
|
* NOTE WELL:
|
|
* These are mapped to take advantage of the common locations for many of
|
|
* the bits on all of the currently supported MAC chips. This is to make
|
|
* the ISR as efficient as possible, while still abstracting HW differences.
|
|
* When new hardware breaks this commonality this enumerated type, as well
|
|
* as the HAL functions using it, must be modified. All values are directly
|
|
* mapped unless commented otherwise.
|
|
*/
|
|
typedef enum {
|
|
HAL_INT_RX = 0x00000001, /* Non-common mapping */
|
|
HAL_INT_RXDESC = 0x00000002, /* Legacy mapping */
|
|
HAL_INT_RXERR = 0x00000004,
|
|
HAL_INT_RXHP = 0x00000001, /* EDMA */
|
|
HAL_INT_RXLP = 0x00000002, /* EDMA */
|
|
HAL_INT_RXNOFRM = 0x00000008,
|
|
HAL_INT_RXEOL = 0x00000010,
|
|
HAL_INT_RXORN = 0x00000020,
|
|
HAL_INT_TX = 0x00000040, /* Non-common mapping */
|
|
HAL_INT_TXDESC = 0x00000080,
|
|
HAL_INT_TIM_TIMER= 0x00000100,
|
|
HAL_INT_MCI = 0x00000200,
|
|
HAL_INT_BBPANIC = 0x00000400,
|
|
HAL_INT_TXURN = 0x00000800,
|
|
HAL_INT_MIB = 0x00001000,
|
|
HAL_INT_RXPHY = 0x00004000,
|
|
HAL_INT_RXKCM = 0x00008000,
|
|
HAL_INT_SWBA = 0x00010000,
|
|
HAL_INT_BRSSI = 0x00020000,
|
|
HAL_INT_BMISS = 0x00040000,
|
|
HAL_INT_BNR = 0x00100000,
|
|
HAL_INT_TIM = 0x00200000, /* Non-common mapping */
|
|
HAL_INT_DTIM = 0x00400000, /* Non-common mapping */
|
|
HAL_INT_DTIMSYNC= 0x00800000, /* Non-common mapping */
|
|
HAL_INT_GPIO = 0x01000000,
|
|
HAL_INT_CABEND = 0x02000000, /* Non-common mapping */
|
|
HAL_INT_TSFOOR = 0x04000000, /* Non-common mapping */
|
|
HAL_INT_TBTT = 0x08000000, /* Non-common mapping */
|
|
/* Atheros ref driver has a generic timer interrupt now..*/
|
|
HAL_INT_GENTIMER = 0x08000000, /* Non-common mapping */
|
|
HAL_INT_CST = 0x10000000, /* Non-common mapping */
|
|
HAL_INT_GTT = 0x20000000, /* Non-common mapping */
|
|
HAL_INT_FATAL = 0x40000000, /* Non-common mapping */
|
|
#define HAL_INT_GLOBAL 0x80000000 /* Set/clear IER */
|
|
HAL_INT_BMISC = HAL_INT_TIM
|
|
| HAL_INT_DTIM
|
|
| HAL_INT_DTIMSYNC
|
|
| HAL_INT_CABEND
|
|
| HAL_INT_TBTT,
|
|
|
|
/* Interrupt bits that map directly to ISR/IMR bits */
|
|
HAL_INT_COMMON = HAL_INT_RXNOFRM
|
|
| HAL_INT_RXDESC
|
|
| HAL_INT_RXEOL
|
|
| HAL_INT_RXORN
|
|
| HAL_INT_TXDESC
|
|
| HAL_INT_TXURN
|
|
| HAL_INT_MIB
|
|
| HAL_INT_RXPHY
|
|
| HAL_INT_RXKCM
|
|
| HAL_INT_SWBA
|
|
| HAL_INT_BMISS
|
|
| HAL_INT_BRSSI
|
|
| HAL_INT_BNR
|
|
| HAL_INT_GPIO,
|
|
} HAL_INT;
|
|
|
|
/*
|
|
* MSI vector assignments
|
|
*/
|
|
typedef enum {
|
|
HAL_MSIVEC_MISC = 0,
|
|
HAL_MSIVEC_TX = 1,
|
|
HAL_MSIVEC_RXLP = 2,
|
|
HAL_MSIVEC_RXHP = 3,
|
|
} HAL_MSIVEC;
|
|
|
|
typedef enum {
|
|
HAL_INT_LINE = 0,
|
|
HAL_INT_MSI = 1,
|
|
} HAL_INT_TYPE;
|
|
|
|
/* For interrupt mitigation registers */
|
|
typedef enum {
|
|
HAL_INT_RX_FIRSTPKT=0,
|
|
HAL_INT_RX_LASTPKT,
|
|
HAL_INT_TX_FIRSTPKT,
|
|
HAL_INT_TX_LASTPKT,
|
|
HAL_INT_THRESHOLD
|
|
} HAL_INT_MITIGATION;
|
|
|
|
/* XXX this is duplicate information! */
|
|
typedef struct {
|
|
u_int32_t cyclecnt_diff; /* delta cycle count */
|
|
u_int32_t rxclr_cnt; /* rx clear count */
|
|
u_int32_t extrxclr_cnt; /* ext chan rx clear count */
|
|
u_int32_t txframecnt_diff; /* delta tx frame count */
|
|
u_int32_t rxframecnt_diff; /* delta rx frame count */
|
|
u_int32_t listen_time; /* listen time in msec - time for which ch is free */
|
|
u_int32_t ofdmphyerr_cnt; /* OFDM err count since last reset */
|
|
u_int32_t cckphyerr_cnt; /* CCK err count since last reset */
|
|
u_int32_t ofdmphyerrcnt_diff; /* delta OFDM Phy Error Count */
|
|
HAL_BOOL valid; /* if the stats are valid*/
|
|
} HAL_ANISTATS;
|
|
|
|
typedef struct {
|
|
u_int8_t txctl_offset;
|
|
u_int8_t txctl_numwords;
|
|
u_int8_t txstatus_offset;
|
|
u_int8_t txstatus_numwords;
|
|
|
|
u_int8_t rxctl_offset;
|
|
u_int8_t rxctl_numwords;
|
|
u_int8_t rxstatus_offset;
|
|
u_int8_t rxstatus_numwords;
|
|
|
|
u_int8_t macRevision;
|
|
} HAL_DESC_INFO;
|
|
|
|
typedef enum {
|
|
HAL_GPIO_OUTPUT_MUX_AS_OUTPUT = 0,
|
|
HAL_GPIO_OUTPUT_MUX_PCIE_ATTENTION_LED = 1,
|
|
HAL_GPIO_OUTPUT_MUX_PCIE_POWER_LED = 2,
|
|
HAL_GPIO_OUTPUT_MUX_MAC_NETWORK_LED = 3,
|
|
HAL_GPIO_OUTPUT_MUX_MAC_POWER_LED = 4,
|
|
HAL_GPIO_OUTPUT_MUX_AS_WLAN_ACTIVE = 5,
|
|
HAL_GPIO_OUTPUT_MUX_AS_TX_FRAME = 6,
|
|
|
|
HAL_GPIO_OUTPUT_MUX_AS_MCI_WLAN_DATA,
|
|
HAL_GPIO_OUTPUT_MUX_AS_MCI_WLAN_CLK,
|
|
HAL_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA,
|
|
HAL_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK,
|
|
HAL_GPIO_OUTPUT_MUX_AS_WL_IN_TX,
|
|
HAL_GPIO_OUTPUT_MUX_AS_WL_IN_RX,
|
|
HAL_GPIO_OUTPUT_MUX_AS_BT_IN_TX,
|
|
HAL_GPIO_OUTPUT_MUX_AS_BT_IN_RX,
|
|
HAL_GPIO_OUTPUT_MUX_AS_RUCKUS_STROBE,
|
|
HAL_GPIO_OUTPUT_MUX_AS_RUCKUS_DATA,
|
|
HAL_GPIO_OUTPUT_MUX_AS_SMARTANT_CTRL0,
|
|
HAL_GPIO_OUTPUT_MUX_AS_SMARTANT_CTRL1,
|
|
HAL_GPIO_OUTPUT_MUX_AS_SMARTANT_CTRL2,
|
|
HAL_GPIO_OUTPUT_MUX_NUM_ENTRIES
|
|
} HAL_GPIO_MUX_TYPE;
|
|
|
|
typedef enum {
|
|
HAL_GPIO_INTR_LOW = 0,
|
|
HAL_GPIO_INTR_HIGH = 1,
|
|
HAL_GPIO_INTR_DISABLE = 2
|
|
} HAL_GPIO_INTR_TYPE;
|
|
|
|
typedef struct halCounters {
|
|
u_int32_t tx_frame_count;
|
|
u_int32_t rx_frame_count;
|
|
u_int32_t rx_clear_count;
|
|
u_int32_t cycle_count;
|
|
u_int8_t is_rx_active; // true (1) or false (0)
|
|
u_int8_t is_tx_active; // true (1) or false (0)
|
|
} HAL_COUNTERS;
|
|
|
|
typedef enum {
|
|
HAL_RFGAIN_INACTIVE = 0,
|
|
HAL_RFGAIN_READ_REQUESTED = 1,
|
|
HAL_RFGAIN_NEED_CHANGE = 2
|
|
} HAL_RFGAIN;
|
|
|
|
typedef uint16_t HAL_CTRY_CODE; /* country code */
|
|
typedef uint16_t HAL_REG_DOMAIN; /* regulatory domain code */
|
|
|
|
#define HAL_ANTENNA_MIN_MODE 0
|
|
#define HAL_ANTENNA_FIXED_A 1
|
|
#define HAL_ANTENNA_FIXED_B 2
|
|
#define HAL_ANTENNA_MAX_MODE 3
|
|
|
|
typedef struct {
|
|
uint32_t ackrcv_bad;
|
|
uint32_t rts_bad;
|
|
uint32_t rts_good;
|
|
uint32_t fcs_bad;
|
|
uint32_t beacons;
|
|
} HAL_MIB_STATS;
|
|
|
|
/*
|
|
* These bits represent what's in ah_currentRDext.
|
|
*/
|
|
typedef enum {
|
|
REG_EXT_FCC_MIDBAND = 0,
|
|
REG_EXT_JAPAN_MIDBAND = 1,
|
|
REG_EXT_FCC_DFS_HT40 = 2,
|
|
REG_EXT_JAPAN_NONDFS_HT40 = 3,
|
|
REG_EXT_JAPAN_DFS_HT40 = 4,
|
|
REG_EXT_FCC_CH_144 = 5,
|
|
} REG_EXT_BITMAP;
|
|
|
|
enum {
|
|
HAL_MODE_11A = 0x001, /* 11a channels */
|
|
HAL_MODE_TURBO = 0x002, /* 11a turbo-only channels */
|
|
HAL_MODE_11B = 0x004, /* 11b channels */
|
|
HAL_MODE_PUREG = 0x008, /* 11g channels (OFDM only) */
|
|
#ifdef notdef
|
|
HAL_MODE_11G = 0x010, /* 11g channels (OFDM/CCK) */
|
|
#else
|
|
HAL_MODE_11G = 0x008, /* XXX historical */
|
|
#endif
|
|
HAL_MODE_108G = 0x020, /* 11g+Turbo channels */
|
|
HAL_MODE_108A = 0x040, /* 11a+Turbo channels */
|
|
HAL_MODE_11A_HALF_RATE = 0x200, /* 11a half width channels */
|
|
HAL_MODE_11A_QUARTER_RATE = 0x400, /* 11a quarter width channels */
|
|
HAL_MODE_11G_HALF_RATE = 0x800, /* 11g half width channels */
|
|
HAL_MODE_11G_QUARTER_RATE = 0x1000, /* 11g quarter width channels */
|
|
HAL_MODE_11NG_HT20 = 0x008000,
|
|
HAL_MODE_11NA_HT20 = 0x010000,
|
|
HAL_MODE_11NG_HT40PLUS = 0x020000,
|
|
HAL_MODE_11NG_HT40MINUS = 0x040000,
|
|
HAL_MODE_11NA_HT40PLUS = 0x080000,
|
|
HAL_MODE_11NA_HT40MINUS = 0x100000,
|
|
HAL_MODE_ALL = 0xffffff
|
|
};
|
|
|
|
typedef struct {
|
|
int rateCount; /* NB: for proper padding */
|
|
uint8_t rateCodeToIndex[256]; /* back mapping */
|
|
struct {
|
|
uint8_t valid; /* valid for rate control use */
|
|
uint8_t phy; /* CCK/OFDM/XR */
|
|
uint32_t rateKbps; /* transfer rate in kbs */
|
|
uint8_t rateCode; /* rate for h/w descriptors */
|
|
uint8_t shortPreamble; /* mask for enabling short
|
|
* preamble in CCK rate code */
|
|
uint8_t dot11Rate; /* value for supported rates
|
|
* info element of MLME */
|
|
uint8_t controlRate; /* index of next lower basic
|
|
* rate; used for dur. calcs */
|
|
uint16_t lpAckDuration; /* long preamble ACK duration */
|
|
uint16_t spAckDuration; /* short preamble ACK duration*/
|
|
} info[64];
|
|
} HAL_RATE_TABLE;
|
|
|
|
typedef struct {
|
|
u_int rs_count; /* number of valid entries */
|
|
uint8_t rs_rates[64]; /* rates */
|
|
} HAL_RATE_SET;
|
|
|
|
/*
|
|
* 802.11n specific structures and enums
|
|
*/
|
|
typedef enum {
|
|
HAL_CHAINTYPE_TX = 1, /* Tx chain type */
|
|
HAL_CHAINTYPE_RX = 2, /* RX chain type */
|
|
} HAL_CHAIN_TYPE;
|
|
|
|
typedef struct {
|
|
u_int Tries;
|
|
u_int Rate; /* hardware rate code */
|
|
u_int RateIndex; /* rate series table index */
|
|
u_int PktDuration;
|
|
u_int ChSel;
|
|
u_int RateFlags;
|
|
#define HAL_RATESERIES_RTS_CTS 0x0001 /* use rts/cts w/this series */
|
|
#define HAL_RATESERIES_2040 0x0002 /* use ext channel for series */
|
|
#define HAL_RATESERIES_HALFGI 0x0004 /* use half-gi for series */
|
|
#define HAL_RATESERIES_STBC 0x0008 /* use STBC for series */
|
|
u_int tx_power_cap; /* in 1/2 dBm units XXX TODO */
|
|
} HAL_11N_RATE_SERIES;
|
|
|
|
typedef enum {
|
|
HAL_HT_MACMODE_20 = 0, /* 20 MHz operation */
|
|
HAL_HT_MACMODE_2040 = 1, /* 20/40 MHz operation */
|
|
} HAL_HT_MACMODE;
|
|
|
|
typedef enum {
|
|
HAL_HT_PHYMODE_20 = 0, /* 20 MHz operation */
|
|
HAL_HT_PHYMODE_2040 = 1, /* 20/40 MHz operation */
|
|
} HAL_HT_PHYMODE;
|
|
|
|
typedef enum {
|
|
HAL_HT_EXTPROTSPACING_20 = 0, /* 20 MHz spacing */
|
|
HAL_HT_EXTPROTSPACING_25 = 1, /* 25 MHz spacing */
|
|
} HAL_HT_EXTPROTSPACING;
|
|
|
|
|
|
typedef enum {
|
|
HAL_RX_CLEAR_CTL_LOW = 0x1, /* force control channel to appear busy */
|
|
HAL_RX_CLEAR_EXT_LOW = 0x2, /* force extension channel to appear busy */
|
|
} HAL_HT_RXCLEAR;
|
|
|
|
typedef enum {
|
|
HAL_FREQ_BAND_5GHZ = 0,
|
|
HAL_FREQ_BAND_2GHZ = 1,
|
|
} HAL_FREQ_BAND;
|
|
|
|
/*
|
|
* Antenna switch control. By default antenna selection
|
|
* enables multiple (2) antenna use. To force use of the
|
|
* A or B antenna only specify a fixed setting. Fixing
|
|
* the antenna will also disable any diversity support.
|
|
*/
|
|
typedef enum {
|
|
HAL_ANT_VARIABLE = 0, /* variable by programming */
|
|
HAL_ANT_FIXED_A = 1, /* fixed antenna A */
|
|
HAL_ANT_FIXED_B = 2, /* fixed antenna B */
|
|
} HAL_ANT_SETTING;
|
|
|
|
typedef enum {
|
|
HAL_M_STA = 1, /* infrastructure station */
|
|
HAL_M_IBSS = 0, /* IBSS (adhoc) station */
|
|
HAL_M_HOSTAP = 6, /* Software Access Point */
|
|
HAL_M_MONITOR = 8 /* Monitor mode */
|
|
} HAL_OPMODE;
|
|
|
|
typedef enum {
|
|
HAL_RESET_NORMAL = 0, /* Do normal reset */
|
|
HAL_RESET_BBPANIC = 1, /* Reset because of BB panic */
|
|
HAL_RESET_FORCE_COLD = 2, /* Force full reset */
|
|
} HAL_RESET_TYPE;
|
|
|
|
enum {
|
|
HAL_RESET_POWER_ON,
|
|
HAL_RESET_WARM,
|
|
HAL_RESET_COLD
|
|
};
|
|
|
|
typedef struct {
|
|
uint8_t kv_type; /* one of HAL_CIPHER */
|
|
uint8_t kv_apsd; /* Mask for APSD enabled ACs */
|
|
uint16_t kv_len; /* length in bits */
|
|
uint8_t kv_val[16]; /* enough for 128-bit keys */
|
|
uint8_t kv_mic[8]; /* TKIP MIC key */
|
|
uint8_t kv_txmic[8]; /* TKIP TX MIC key (optional) */
|
|
} HAL_KEYVAL;
|
|
|
|
/*
|
|
* This is the TX descriptor field which marks the key padding requirement.
|
|
* The naming is unfortunately unclear.
|
|
*/
|
|
#define AH_KEYTYPE_MASK 0x0F
|
|
typedef enum {
|
|
HAL_KEY_TYPE_CLEAR,
|
|
HAL_KEY_TYPE_WEP,
|
|
HAL_KEY_TYPE_AES,
|
|
HAL_KEY_TYPE_TKIP,
|
|
} HAL_KEY_TYPE;
|
|
|
|
typedef enum {
|
|
HAL_CIPHER_WEP = 0,
|
|
HAL_CIPHER_AES_OCB = 1,
|
|
HAL_CIPHER_AES_CCM = 2,
|
|
HAL_CIPHER_CKIP = 3,
|
|
HAL_CIPHER_TKIP = 4,
|
|
HAL_CIPHER_CLR = 5, /* no encryption */
|
|
|
|
HAL_CIPHER_MIC = 127 /* TKIP-MIC, not a cipher */
|
|
} HAL_CIPHER;
|
|
|
|
enum {
|
|
HAL_SLOT_TIME_6 = 6, /* NB: for turbo mode */
|
|
HAL_SLOT_TIME_9 = 9,
|
|
HAL_SLOT_TIME_20 = 20,
|
|
};
|
|
|
|
/*
|
|
* Per-station beacon timer state. Note that the specified
|
|
* beacon interval (given in TU's) can also include flags
|
|
* to force a TSF reset and to enable the beacon xmit logic.
|
|
* If bs_cfpmaxduration is non-zero the hardware is setup to
|
|
* coexist with a PCF-capable AP.
|
|
*/
|
|
typedef struct {
|
|
uint32_t bs_nexttbtt; /* next beacon in TU */
|
|
uint32_t bs_nextdtim; /* next DTIM in TU */
|
|
uint32_t bs_intval; /* beacon interval+flags */
|
|
/*
|
|
* HAL_BEACON_PERIOD, HAL_BEACON_ENA and HAL_BEACON_RESET_TSF
|
|
* are all 1:1 correspondances with the pre-11n chip AR_BEACON
|
|
* register.
|
|
*/
|
|
#define HAL_BEACON_PERIOD 0x0000ffff /* beacon interval period */
|
|
#define HAL_BEACON_PERIOD_TU8 0x0007ffff /* beacon interval, tu/8 */
|
|
#define HAL_BEACON_ENA 0x00800000 /* beacon xmit enable */
|
|
#define HAL_BEACON_RESET_TSF 0x01000000 /* clear TSF */
|
|
#define HAL_TSFOOR_THRESHOLD 0x00004240 /* TSF OOR thresh (16k uS) */
|
|
uint32_t bs_dtimperiod;
|
|
uint16_t bs_cfpperiod; /* CFP period in TU */
|
|
uint16_t bs_cfpmaxduration; /* max CFP duration in TU */
|
|
uint32_t bs_cfpnext; /* next CFP in TU */
|
|
uint16_t bs_timoffset; /* byte offset to TIM bitmap */
|
|
uint16_t bs_bmissthreshold; /* beacon miss threshold */
|
|
uint32_t bs_sleepduration; /* max sleep duration */
|
|
uint32_t bs_tsfoor_threshold; /* TSF out of range threshold */
|
|
} HAL_BEACON_STATE;
|
|
|
|
/*
|
|
* Like HAL_BEACON_STATE but for non-station mode setup.
|
|
* NB: see above flag definitions for bt_intval.
|
|
*/
|
|
typedef struct {
|
|
uint32_t bt_intval; /* beacon interval+flags */
|
|
uint32_t bt_nexttbtt; /* next beacon in TU */
|
|
uint32_t bt_nextatim; /* next ATIM in TU */
|
|
uint32_t bt_nextdba; /* next DBA in 1/8th TU */
|
|
uint32_t bt_nextswba; /* next SWBA in 1/8th TU */
|
|
uint32_t bt_flags; /* timer enables */
|
|
#define HAL_BEACON_TBTT_EN 0x00000001
|
|
#define HAL_BEACON_DBA_EN 0x00000002
|
|
#define HAL_BEACON_SWBA_EN 0x00000004
|
|
} HAL_BEACON_TIMERS;
|
|
|
|
/*
|
|
* Per-node statistics maintained by the driver for use in
|
|
* optimizing signal quality and other operational aspects.
|
|
*/
|
|
typedef struct {
|
|
uint32_t ns_avgbrssi; /* average beacon rssi */
|
|
uint32_t ns_avgrssi; /* average data rssi */
|
|
uint32_t ns_avgtxrssi; /* average tx rssi */
|
|
} HAL_NODE_STATS;
|
|
|
|
#define HAL_RSSI_EP_MULTIPLIER (1<<7) /* pow2 to optimize out * and / */
|
|
|
|
/*
|
|
* This is the ANI state and MIB stats.
|
|
*
|
|
* It's used by the HAL modules to keep state /and/ by the debug ioctl
|
|
* to fetch ANI information.
|
|
*/
|
|
typedef struct {
|
|
uint32_t ast_ani_niup; /* ANI increased noise immunity */
|
|
uint32_t ast_ani_nidown; /* ANI decreased noise immunity */
|
|
uint32_t ast_ani_spurup; /* ANI increased spur immunity */
|
|
uint32_t ast_ani_spurdown;/* ANI descreased spur immunity */
|
|
uint32_t ast_ani_ofdmon; /* ANI OFDM weak signal detect on */
|
|
uint32_t ast_ani_ofdmoff;/* ANI OFDM weak signal detect off */
|
|
uint32_t ast_ani_cckhigh;/* ANI CCK weak signal threshold high */
|
|
uint32_t ast_ani_ccklow; /* ANI CCK weak signal threshold low */
|
|
uint32_t ast_ani_stepup; /* ANI increased first step level */
|
|
uint32_t ast_ani_stepdown;/* ANI decreased first step level */
|
|
uint32_t ast_ani_ofdmerrs;/* ANI cumulative ofdm phy err count */
|
|
uint32_t ast_ani_cckerrs;/* ANI cumulative cck phy err count */
|
|
uint32_t ast_ani_reset; /* ANI parameters zero'd for non-STA */
|
|
uint32_t ast_ani_lzero; /* ANI listen time forced to zero */
|
|
uint32_t ast_ani_lneg; /* ANI listen time calculated < 0 */
|
|
HAL_MIB_STATS ast_mibstats; /* MIB counter stats */
|
|
HAL_NODE_STATS ast_nodestats; /* Latest rssi stats from driver */
|
|
} HAL_ANI_STATS;
|
|
|
|
typedef struct {
|
|
uint8_t noiseImmunityLevel; /* Global for pre-AR9380; OFDM later*/
|
|
uint8_t cckNoiseImmunityLevel; /* AR9380: CCK specific NI */
|
|
uint8_t spurImmunityLevel;
|
|
uint8_t firstepLevel;
|
|
uint8_t ofdmWeakSigDetectOff;
|
|
uint8_t cckWeakSigThreshold;
|
|
uint8_t mrcCck; /* MRC CCK is enabled */
|
|
uint32_t listenTime;
|
|
|
|
/* NB: intentionally ordered so data exported to user space is first */
|
|
uint32_t txFrameCount; /* Last txFrameCount */
|
|
uint32_t rxFrameCount; /* Last rx Frame count */
|
|
uint32_t cycleCount; /* Last cycleCount
|
|
(to detect wrap-around) */
|
|
uint32_t ofdmPhyErrCount;/* OFDM err count since last reset */
|
|
uint32_t cckPhyErrCount; /* CCK err count since last reset */
|
|
} HAL_ANI_STATE;
|
|
|
|
struct ath_desc;
|
|
struct ath_tx_status;
|
|
struct ath_rx_status;
|
|
struct ieee80211_channel;
|
|
|
|
/*
|
|
* This is a channel survey sample entry.
|
|
*
|
|
* The AR5212 ANI routines fill these samples. The ANI code then uses it
|
|
* when calculating listen time; it is also exported via a diagnostic
|
|
* API.
|
|
*/
|
|
typedef struct {
|
|
uint32_t seq_num;
|
|
uint32_t tx_busy;
|
|
uint32_t rx_busy;
|
|
uint32_t chan_busy;
|
|
uint32_t ext_chan_busy;
|
|
uint32_t cycle_count;
|
|
/* XXX TODO */
|
|
uint32_t ofdm_phyerr_count;
|
|
uint32_t cck_phyerr_count;
|
|
} HAL_SURVEY_SAMPLE;
|
|
|
|
/*
|
|
* This provides 3.2 seconds of sample space given an
|
|
* ANI time of 1/10th of a second. This may not be enough!
|
|
*/
|
|
#define CHANNEL_SURVEY_SAMPLE_COUNT 32
|
|
|
|
typedef struct {
|
|
HAL_SURVEY_SAMPLE samples[CHANNEL_SURVEY_SAMPLE_COUNT];
|
|
uint32_t cur_sample; /* current sample in sequence */
|
|
uint32_t cur_seq; /* current sequence number */
|
|
} HAL_CHANNEL_SURVEY;
|
|
|
|
/*
|
|
* ANI commands.
|
|
*
|
|
* These are used both internally and externally via the diagnostic
|
|
* API.
|
|
*
|
|
* Note that this is NOT the ANI commands being used via the INTMIT
|
|
* capability - that has a different mapping for some reason.
|
|
*/
|
|
typedef enum {
|
|
HAL_ANI_PRESENT = 0, /* is ANI support present */
|
|
HAL_ANI_NOISE_IMMUNITY_LEVEL = 1, /* set level (global or ofdm) */
|
|
HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION = 2, /* enable/disable */
|
|
HAL_ANI_CCK_WEAK_SIGNAL_THR = 3, /* enable/disable */
|
|
HAL_ANI_FIRSTEP_LEVEL = 4, /* set level */
|
|
HAL_ANI_SPUR_IMMUNITY_LEVEL = 5, /* set level */
|
|
HAL_ANI_MODE = 6, /* 0 => manual, 1 => auto (XXX do not change) */
|
|
HAL_ANI_PHYERR_RESET = 7, /* reset phy error stats */
|
|
HAL_ANI_MRC_CCK = 8,
|
|
HAL_ANI_CCK_NOISE_IMMUNITY_LEVEL = 9, /* set level (cck) */
|
|
} HAL_ANI_CMD;
|
|
|
|
#define HAL_ANI_ALL 0xffffffff
|
|
|
|
/*
|
|
* This is the layout of the ANI INTMIT capability.
|
|
*
|
|
* Notice that the command values differ to HAL_ANI_CMD.
|
|
*/
|
|
typedef enum {
|
|
HAL_CAP_INTMIT_PRESENT = 0,
|
|
HAL_CAP_INTMIT_ENABLE = 1,
|
|
HAL_CAP_INTMIT_NOISE_IMMUNITY_LEVEL = 2,
|
|
HAL_CAP_INTMIT_OFDM_WEAK_SIGNAL_LEVEL = 3,
|
|
HAL_CAP_INTMIT_CCK_WEAK_SIGNAL_THR = 4,
|
|
HAL_CAP_INTMIT_FIRSTEP_LEVEL = 5,
|
|
HAL_CAP_INTMIT_SPUR_IMMUNITY_LEVEL = 6
|
|
} HAL_CAP_INTMIT_CMD;
|
|
|
|
typedef struct {
|
|
int32_t pe_firpwr; /* FIR pwr out threshold */
|
|
int32_t pe_rrssi; /* Radar rssi thresh */
|
|
int32_t pe_height; /* Pulse height thresh */
|
|
int32_t pe_prssi; /* Pulse rssi thresh */
|
|
int32_t pe_inband; /* Inband thresh */
|
|
|
|
/* The following params are only for AR5413 and later */
|
|
u_int32_t pe_relpwr; /* Relative power threshold in 0.5dB steps */
|
|
u_int32_t pe_relstep; /* Pulse Relative step threshold in 0.5dB steps */
|
|
u_int32_t pe_maxlen; /* Max length of radar sign in 0.8us units */
|
|
int32_t pe_usefir128; /* Use the average in-band power measured over 128 cycles */
|
|
int32_t pe_blockradar; /*
|
|
* Enable to block radar check if pkt detect is done via OFDM
|
|
* weak signal detect or pkt is detected immediately after tx
|
|
* to rx transition
|
|
*/
|
|
int32_t pe_enmaxrssi; /*
|
|
* Enable to use the max rssi instead of the last rssi during
|
|
* fine gain changes for radar detection
|
|
*/
|
|
int32_t pe_extchannel; /* Enable DFS on ext channel */
|
|
int32_t pe_enabled; /* Whether radar detection is enabled */
|
|
int32_t pe_enrelpwr;
|
|
int32_t pe_en_relstep_check;
|
|
} HAL_PHYERR_PARAM;
|
|
|
|
#define HAL_PHYERR_PARAM_NOVAL 65535
|
|
|
|
typedef struct {
|
|
u_int16_t ss_fft_period; /* Skip interval for FFT reports */
|
|
u_int16_t ss_period; /* Spectral scan period */
|
|
u_int16_t ss_count; /* # of reports to return from ss_active */
|
|
u_int16_t ss_short_report;/* Set to report ony 1 set of FFT results */
|
|
u_int8_t radar_bin_thresh_sel; /* strong signal radar FFT threshold configuration */
|
|
u_int16_t ss_spectral_pri; /* are we doing a noise power cal ? */
|
|
int8_t ss_nf_cal[AH_MAX_CHAINS*2]; /* nf calibrated values for ctl+ext from eeprom */
|
|
int8_t ss_nf_pwr[AH_MAX_CHAINS*2]; /* nf pwr values for ctl+ext from eeprom */
|
|
int32_t ss_nf_temp_data; /* temperature data taken during nf scan */
|
|
int ss_enabled;
|
|
int ss_active;
|
|
} HAL_SPECTRAL_PARAM;
|
|
#define HAL_SPECTRAL_PARAM_NOVAL 0xFFFF
|
|
#define HAL_SPECTRAL_PARAM_ENABLE 0x8000 /* Enable/Disable if applicable */
|
|
|
|
/*
|
|
* DFS operating mode flags.
|
|
*/
|
|
typedef enum {
|
|
HAL_DFS_UNINIT_DOMAIN = 0, /* Uninitialized dfs domain */
|
|
HAL_DFS_FCC_DOMAIN = 1, /* FCC3 dfs domain */
|
|
HAL_DFS_ETSI_DOMAIN = 2, /* ETSI dfs domain */
|
|
HAL_DFS_MKK4_DOMAIN = 3, /* Japan dfs domain */
|
|
} HAL_DFS_DOMAIN;
|
|
|
|
|
|
/*
|
|
* MFP decryption options for initializing the MAC.
|
|
*/
|
|
typedef enum {
|
|
HAL_MFP_QOSDATA = 0, /* Decrypt MFP frames like QoS data frames. All chips before Merlin. */
|
|
HAL_MFP_PASSTHRU, /* Don't decrypt MFP frames at all. Passthrough */
|
|
HAL_MFP_HW_CRYPTO /* hardware decryption enabled. Merlin can do it. */
|
|
} HAL_MFP_OPT_T;
|
|
|
|
/* LNA config supported */
|
|
typedef enum {
|
|
HAL_ANT_DIV_COMB_LNA1_MINUS_LNA2 = 0,
|
|
HAL_ANT_DIV_COMB_LNA2 = 1,
|
|
HAL_ANT_DIV_COMB_LNA1 = 2,
|
|
HAL_ANT_DIV_COMB_LNA1_PLUS_LNA2 = 3,
|
|
} HAL_ANT_DIV_COMB_LNA_CONF;
|
|
|
|
typedef struct {
|
|
u_int8_t main_lna_conf;
|
|
u_int8_t alt_lna_conf;
|
|
u_int8_t fast_div_bias;
|
|
u_int8_t main_gaintb;
|
|
u_int8_t alt_gaintb;
|
|
u_int8_t antdiv_configgroup;
|
|
int8_t lna1_lna2_delta;
|
|
} HAL_ANT_COMB_CONFIG;
|
|
|
|
#define DEFAULT_ANTDIV_CONFIG_GROUP 0x00
|
|
#define HAL_ANTDIV_CONFIG_GROUP_1 0x01
|
|
#define HAL_ANTDIV_CONFIG_GROUP_2 0x02
|
|
#define HAL_ANTDIV_CONFIG_GROUP_3 0x03
|
|
|
|
/*
|
|
* Flag for setting QUIET period
|
|
*/
|
|
typedef enum {
|
|
HAL_QUIET_DISABLE = 0x0,
|
|
HAL_QUIET_ENABLE = 0x1,
|
|
HAL_QUIET_ADD_CURRENT_TSF = 0x2, /* add current TSF to next_start offset */
|
|
HAL_QUIET_ADD_SWBA_RESP_TIME = 0x4, /* add beacon response time to next_start offset */
|
|
} HAL_QUIET_FLAG;
|
|
|
|
#define HAL_DFS_EVENT_PRICH 0x0000001
|
|
#define HAL_DFS_EVENT_EXTCH 0x0000002
|
|
#define HAL_DFS_EVENT_EXTEARLY 0x0000004
|
|
#define HAL_DFS_EVENT_ISDC 0x0000008
|
|
|
|
struct hal_dfs_event {
|
|
uint64_t re_full_ts; /* 64-bit full timestamp from interrupt time */
|
|
uint32_t re_ts; /* Original 15 bit recv timestamp */
|
|
uint8_t re_rssi; /* rssi of radar event */
|
|
uint8_t re_dur; /* duration of radar pulse */
|
|
uint32_t re_flags; /* Flags (see above) */
|
|
};
|
|
typedef struct hal_dfs_event HAL_DFS_EVENT;
|
|
|
|
/*
|
|
* Generic Timer domain
|
|
*/
|
|
typedef enum {
|
|
HAL_GEN_TIMER_TSF = 0,
|
|
HAL_GEN_TIMER_TSF2,
|
|
HAL_GEN_TIMER_TSF_ANY
|
|
} HAL_GEN_TIMER_DOMAIN;
|
|
|
|
/*
|
|
* BT Co-existence definitions
|
|
*/
|
|
#include "ath_hal/ah_btcoex.h"
|
|
|
|
struct hal_bb_panic_info {
|
|
u_int32_t status;
|
|
u_int32_t tsf;
|
|
u_int32_t phy_panic_wd_ctl1;
|
|
u_int32_t phy_panic_wd_ctl2;
|
|
u_int32_t phy_gen_ctrl;
|
|
u_int32_t rxc_pcnt;
|
|
u_int32_t rxf_pcnt;
|
|
u_int32_t txf_pcnt;
|
|
u_int32_t cycles;
|
|
u_int32_t wd;
|
|
u_int32_t det;
|
|
u_int32_t rdar;
|
|
u_int32_t r_odfm;
|
|
u_int32_t r_cck;
|
|
u_int32_t t_odfm;
|
|
u_int32_t t_cck;
|
|
u_int32_t agc;
|
|
u_int32_t src;
|
|
};
|
|
|
|
/* Serialize Register Access Mode */
|
|
typedef enum {
|
|
SER_REG_MODE_OFF = 0,
|
|
SER_REG_MODE_ON = 1,
|
|
SER_REG_MODE_AUTO = 2,
|
|
} SER_REG_MODE;
|
|
|
|
typedef struct
|
|
{
|
|
int ah_debug; /* only used if AH_DEBUG is defined */
|
|
int ah_ar5416_biasadj; /* enable AR2133 radio specific bias fiddling */
|
|
|
|
/* NB: these are deprecated; they exist for now for compatibility */
|
|
int ah_dma_beacon_response_time;/* in TU's */
|
|
int ah_sw_beacon_response_time; /* in TU's */
|
|
int ah_additional_swba_backoff; /* in TU's */
|
|
int ah_force_full_reset; /* force full chip reset rather then warm reset */
|
|
int ah_serialise_reg_war; /* force serialisation of register IO */
|
|
|
|
/* XXX these don't belong here, they're just for the ar9300 HAL port effort */
|
|
int ath_hal_desc_tpc; /* Per-packet TPC */
|
|
int ath_hal_sta_update_tx_pwr_enable; /* GreenTX */
|
|
int ath_hal_sta_update_tx_pwr_enable_S1; /* GreenTX */
|
|
int ath_hal_sta_update_tx_pwr_enable_S2; /* GreenTX */
|
|
int ath_hal_sta_update_tx_pwr_enable_S3; /* GreenTX */
|
|
|
|
/* I'm not sure what the default values for these should be */
|
|
int ath_hal_pll_pwr_save;
|
|
int ath_hal_pcie_power_save_enable;
|
|
int ath_hal_intr_mitigation_rx;
|
|
int ath_hal_intr_mitigation_tx;
|
|
|
|
int ath_hal_pcie_clock_req;
|
|
#define AR_PCIE_PLL_PWRSAVE_CONTROL (1<<0)
|
|
#define AR_PCIE_PLL_PWRSAVE_ON_D3 (1<<1)
|
|
#define AR_PCIE_PLL_PWRSAVE_ON_D0 (1<<2)
|
|
|
|
int ath_hal_pcie_waen;
|
|
int ath_hal_pcie_ser_des_write;
|
|
|
|
/* these are important for correct AR9300 behaviour */
|
|
int ath_hal_ht_enable; /* needs to be enabled for AR9300 HT */
|
|
int ath_hal_diversity_control;
|
|
int ath_hal_antenna_switch_swap;
|
|
int ath_hal_ext_lna_ctl_gpio;
|
|
int ath_hal_spur_mode;
|
|
int ath_hal_6mb_ack; /* should set this to 1 for 11a/11na? */
|
|
int ath_hal_enable_msi; /* enable MSI interrupts (needed?) */
|
|
int ath_hal_beacon_filter_interval; /* ok to be 0 for now? */
|
|
|
|
/* For now, set this to 0 - net80211 needs to know about hardware MFP support */
|
|
int ath_hal_mfp_support;
|
|
|
|
int ath_hal_enable_ani; /* should set this.. */
|
|
int ath_hal_cwm_ignore_ext_cca;
|
|
int ath_hal_show_bb_panic;
|
|
int ath_hal_ant_ctrl_comm2g_switch_enable;
|
|
int ath_hal_ext_atten_margin_cfg;
|
|
int ath_hal_min_gainidx;
|
|
int ath_hal_war70c;
|
|
uint32_t ath_hal_mci_config;
|
|
} HAL_OPS_CONFIG;
|
|
|
|
/*
|
|
* Hardware Access Layer (HAL) API.
|
|
*
|
|
* Clients of the HAL call ath_hal_attach to obtain a reference to an
|
|
* ath_hal structure for use with the device. Hardware-related operations
|
|
* that follow must call back into the HAL through interface, supplying
|
|
* the reference as the first parameter. Note that before using the
|
|
* reference returned by ath_hal_attach the caller should verify the
|
|
* ABI version number.
|
|
*/
|
|
struct ath_hal {
|
|
uint32_t ah_magic; /* consistency check magic number */
|
|
uint16_t ah_devid; /* PCI device ID */
|
|
uint16_t ah_subvendorid; /* PCI subvendor ID */
|
|
HAL_SOFTC ah_sc; /* back pointer to driver/os state */
|
|
HAL_BUS_TAG ah_st; /* params for register r+w */
|
|
HAL_BUS_HANDLE ah_sh;
|
|
HAL_CTRY_CODE ah_countryCode;
|
|
|
|
uint32_t ah_macVersion; /* MAC version id */
|
|
uint16_t ah_macRev; /* MAC revision */
|
|
uint16_t ah_phyRev; /* PHY revision */
|
|
/* NB: when only one radio is present the rev is in 5Ghz */
|
|
uint16_t ah_analog5GhzRev;/* 5GHz radio revision */
|
|
uint16_t ah_analog2GhzRev;/* 2GHz radio revision */
|
|
|
|
uint16_t *ah_eepromdata; /* eeprom buffer, if needed */
|
|
|
|
uint32_t ah_intrstate[8]; /* last int state */
|
|
uint32_t ah_syncstate; /* last sync intr state */
|
|
|
|
/* Current powerstate from HAL calls */
|
|
HAL_POWER_MODE ah_powerMode;
|
|
|
|
HAL_OPS_CONFIG ah_config;
|
|
const HAL_RATE_TABLE *__ahdecl(*ah_getRateTable)(struct ath_hal *,
|
|
u_int mode);
|
|
void __ahdecl(*ah_detach)(struct ath_hal*);
|
|
|
|
/* Reset functions */
|
|
HAL_BOOL __ahdecl(*ah_reset)(struct ath_hal *, HAL_OPMODE,
|
|
struct ieee80211_channel *,
|
|
HAL_BOOL bChannelChange,
|
|
HAL_RESET_TYPE resetType,
|
|
HAL_STATUS *status);
|
|
HAL_BOOL __ahdecl(*ah_phyDisable)(struct ath_hal *);
|
|
HAL_BOOL __ahdecl(*ah_disable)(struct ath_hal *);
|
|
void __ahdecl(*ah_configPCIE)(struct ath_hal *, HAL_BOOL restore,
|
|
HAL_BOOL power_off);
|
|
void __ahdecl(*ah_disablePCIE)(struct ath_hal *);
|
|
void __ahdecl(*ah_setPCUConfig)(struct ath_hal *);
|
|
HAL_BOOL __ahdecl(*ah_perCalibration)(struct ath_hal*,
|
|
struct ieee80211_channel *, HAL_BOOL *);
|
|
HAL_BOOL __ahdecl(*ah_perCalibrationN)(struct ath_hal *,
|
|
struct ieee80211_channel *, u_int chainMask,
|
|
HAL_BOOL longCal, HAL_BOOL *isCalDone);
|
|
HAL_BOOL __ahdecl(*ah_resetCalValid)(struct ath_hal *,
|
|
const struct ieee80211_channel *);
|
|
HAL_BOOL __ahdecl(*ah_setTxPower)(struct ath_hal *,
|
|
const struct ieee80211_channel *, uint16_t *);
|
|
HAL_BOOL __ahdecl(*ah_setTxPowerLimit)(struct ath_hal *, uint32_t);
|
|
HAL_BOOL __ahdecl(*ah_setBoardValues)(struct ath_hal *,
|
|
const struct ieee80211_channel *);
|
|
|
|
/* Transmit functions */
|
|
HAL_BOOL __ahdecl(*ah_updateTxTrigLevel)(struct ath_hal*,
|
|
HAL_BOOL incTrigLevel);
|
|
int __ahdecl(*ah_setupTxQueue)(struct ath_hal *, HAL_TX_QUEUE,
|
|
const HAL_TXQ_INFO *qInfo);
|
|
HAL_BOOL __ahdecl(*ah_setTxQueueProps)(struct ath_hal *, int q,
|
|
const HAL_TXQ_INFO *qInfo);
|
|
HAL_BOOL __ahdecl(*ah_getTxQueueProps)(struct ath_hal *, int q,
|
|
HAL_TXQ_INFO *qInfo);
|
|
HAL_BOOL __ahdecl(*ah_releaseTxQueue)(struct ath_hal *ah, u_int q);
|
|
HAL_BOOL __ahdecl(*ah_resetTxQueue)(struct ath_hal *ah, u_int q);
|
|
uint32_t __ahdecl(*ah_getTxDP)(struct ath_hal*, u_int);
|
|
HAL_BOOL __ahdecl(*ah_setTxDP)(struct ath_hal*, u_int, uint32_t txdp);
|
|
uint32_t __ahdecl(*ah_numTxPending)(struct ath_hal *, u_int q);
|
|
HAL_BOOL __ahdecl(*ah_startTxDma)(struct ath_hal*, u_int);
|
|
HAL_BOOL __ahdecl(*ah_stopTxDma)(struct ath_hal*, u_int);
|
|
HAL_BOOL __ahdecl(*ah_setupTxDesc)(struct ath_hal *, struct ath_desc *,
|
|
u_int pktLen, u_int hdrLen,
|
|
HAL_PKT_TYPE type, u_int txPower,
|
|
u_int txRate0, u_int txTries0,
|
|
u_int keyIx, u_int antMode, u_int flags,
|
|
u_int rtsctsRate, u_int rtsctsDuration,
|
|
u_int compicvLen, u_int compivLen,
|
|
u_int comp);
|
|
HAL_BOOL __ahdecl(*ah_setupXTxDesc)(struct ath_hal *, struct ath_desc*,
|
|
u_int txRate1, u_int txTries1,
|
|
u_int txRate2, u_int txTries2,
|
|
u_int txRate3, u_int txTries3);
|
|
HAL_BOOL __ahdecl(*ah_fillTxDesc)(struct ath_hal *, struct ath_desc *,
|
|
HAL_DMA_ADDR *bufAddrList, uint32_t *segLenList,
|
|
u_int descId, u_int qcuId, HAL_BOOL firstSeg,
|
|
HAL_BOOL lastSeg, const struct ath_desc *);
|
|
HAL_STATUS __ahdecl(*ah_procTxDesc)(struct ath_hal *,
|
|
struct ath_desc *, struct ath_tx_status *);
|
|
void __ahdecl(*ah_getTxIntrQueue)(struct ath_hal *, uint32_t *);
|
|
void __ahdecl(*ah_reqTxIntrDesc)(struct ath_hal *, struct ath_desc*);
|
|
HAL_BOOL __ahdecl(*ah_getTxCompletionRates)(struct ath_hal *,
|
|
const struct ath_desc *ds, int *rates, int *tries);
|
|
void __ahdecl(*ah_setTxDescLink)(struct ath_hal *ah, void *ds,
|
|
uint32_t link);
|
|
void __ahdecl(*ah_getTxDescLink)(struct ath_hal *ah, void *ds,
|
|
uint32_t *link);
|
|
void __ahdecl(*ah_getTxDescLinkPtr)(struct ath_hal *ah, void *ds,
|
|
uint32_t **linkptr);
|
|
void __ahdecl(*ah_setupTxStatusRing)(struct ath_hal *,
|
|
void *ts_start, uint32_t ts_paddr_start,
|
|
uint16_t size);
|
|
void __ahdecl(*ah_getTxRawTxDesc)(struct ath_hal *, u_int32_t *);
|
|
|
|
/* Receive Functions */
|
|
uint32_t __ahdecl(*ah_getRxDP)(struct ath_hal*, HAL_RX_QUEUE);
|
|
void __ahdecl(*ah_setRxDP)(struct ath_hal*, uint32_t rxdp, HAL_RX_QUEUE);
|
|
void __ahdecl(*ah_enableReceive)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_stopDmaReceive)(struct ath_hal*);
|
|
void __ahdecl(*ah_startPcuReceive)(struct ath_hal*, HAL_BOOL);
|
|
void __ahdecl(*ah_stopPcuReceive)(struct ath_hal*);
|
|
void __ahdecl(*ah_setMulticastFilter)(struct ath_hal*,
|
|
uint32_t filter0, uint32_t filter1);
|
|
HAL_BOOL __ahdecl(*ah_setMulticastFilterIndex)(struct ath_hal*,
|
|
uint32_t index);
|
|
HAL_BOOL __ahdecl(*ah_clrMulticastFilterIndex)(struct ath_hal*,
|
|
uint32_t index);
|
|
uint32_t __ahdecl(*ah_getRxFilter)(struct ath_hal*);
|
|
void __ahdecl(*ah_setRxFilter)(struct ath_hal*, uint32_t);
|
|
HAL_BOOL __ahdecl(*ah_setupRxDesc)(struct ath_hal *, struct ath_desc *,
|
|
uint32_t size, u_int flags);
|
|
HAL_STATUS __ahdecl(*ah_procRxDesc)(struct ath_hal *,
|
|
struct ath_desc *, uint32_t phyAddr,
|
|
struct ath_desc *next, uint64_t tsf,
|
|
struct ath_rx_status *);
|
|
void __ahdecl(*ah_rxMonitor)(struct ath_hal *,
|
|
const HAL_NODE_STATS *,
|
|
const struct ieee80211_channel *);
|
|
void __ahdecl(*ah_aniPoll)(struct ath_hal *,
|
|
const struct ieee80211_channel *);
|
|
void __ahdecl(*ah_procMibEvent)(struct ath_hal *,
|
|
const HAL_NODE_STATS *);
|
|
|
|
/* Misc Functions */
|
|
HAL_STATUS __ahdecl(*ah_getCapability)(struct ath_hal *,
|
|
HAL_CAPABILITY_TYPE, uint32_t capability,
|
|
uint32_t *result);
|
|
HAL_BOOL __ahdecl(*ah_setCapability)(struct ath_hal *,
|
|
HAL_CAPABILITY_TYPE, uint32_t capability,
|
|
uint32_t setting, HAL_STATUS *);
|
|
HAL_BOOL __ahdecl(*ah_getDiagState)(struct ath_hal *, int request,
|
|
const void *args, uint32_t argsize,
|
|
void **result, uint32_t *resultsize);
|
|
void __ahdecl(*ah_getMacAddress)(struct ath_hal *, uint8_t *);
|
|
HAL_BOOL __ahdecl(*ah_setMacAddress)(struct ath_hal *, const uint8_t*);
|
|
void __ahdecl(*ah_getBssIdMask)(struct ath_hal *, uint8_t *);
|
|
HAL_BOOL __ahdecl(*ah_setBssIdMask)(struct ath_hal *, const uint8_t*);
|
|
HAL_BOOL __ahdecl(*ah_setRegulatoryDomain)(struct ath_hal*,
|
|
uint16_t, HAL_STATUS *);
|
|
void __ahdecl(*ah_setLedState)(struct ath_hal*, HAL_LED_STATE);
|
|
void __ahdecl(*ah_writeAssocid)(struct ath_hal*,
|
|
const uint8_t *bssid, uint16_t assocId);
|
|
HAL_BOOL __ahdecl(*ah_gpioCfgOutput)(struct ath_hal *,
|
|
uint32_t gpio, HAL_GPIO_MUX_TYPE);
|
|
HAL_BOOL __ahdecl(*ah_gpioCfgInput)(struct ath_hal *, uint32_t gpio);
|
|
uint32_t __ahdecl(*ah_gpioGet)(struct ath_hal *, uint32_t gpio);
|
|
HAL_BOOL __ahdecl(*ah_gpioSet)(struct ath_hal *,
|
|
uint32_t gpio, uint32_t val);
|
|
void __ahdecl(*ah_gpioSetIntr)(struct ath_hal*, u_int, uint32_t);
|
|
uint32_t __ahdecl(*ah_getTsf32)(struct ath_hal*);
|
|
uint64_t __ahdecl(*ah_getTsf64)(struct ath_hal*);
|
|
void __ahdecl(*ah_setTsf64)(struct ath_hal *, uint64_t);
|
|
void __ahdecl(*ah_resetTsf)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_detectCardPresent)(struct ath_hal*);
|
|
void __ahdecl(*ah_updateMibCounters)(struct ath_hal*,
|
|
HAL_MIB_STATS*);
|
|
HAL_RFGAIN __ahdecl(*ah_getRfGain)(struct ath_hal*);
|
|
u_int __ahdecl(*ah_getDefAntenna)(struct ath_hal*);
|
|
void __ahdecl(*ah_setDefAntenna)(struct ath_hal*, u_int);
|
|
HAL_ANT_SETTING __ahdecl(*ah_getAntennaSwitch)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setAntennaSwitch)(struct ath_hal*,
|
|
HAL_ANT_SETTING);
|
|
HAL_BOOL __ahdecl(*ah_setSifsTime)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getSifsTime)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setSlotTime)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getSlotTime)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setAckTimeout)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getAckTimeout)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setAckCTSRate)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getAckCTSRate)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setCTSTimeout)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getCTSTimeout)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setDecompMask)(struct ath_hal*, uint16_t, int);
|
|
void __ahdecl(*ah_setCoverageClass)(struct ath_hal*, uint8_t, int);
|
|
HAL_STATUS __ahdecl(*ah_setQuiet)(struct ath_hal *ah, uint32_t period,
|
|
uint32_t duration, uint32_t nextStart,
|
|
HAL_QUIET_FLAG flag);
|
|
void __ahdecl(*ah_setChainMasks)(struct ath_hal *,
|
|
uint32_t, uint32_t);
|
|
|
|
/* DFS functions */
|
|
void __ahdecl(*ah_enableDfs)(struct ath_hal *ah,
|
|
HAL_PHYERR_PARAM *pe);
|
|
void __ahdecl(*ah_getDfsThresh)(struct ath_hal *ah,
|
|
HAL_PHYERR_PARAM *pe);
|
|
HAL_BOOL __ahdecl(*ah_getDfsDefaultThresh)(struct ath_hal *ah,
|
|
HAL_PHYERR_PARAM *pe);
|
|
HAL_BOOL __ahdecl(*ah_procRadarEvent)(struct ath_hal *ah,
|
|
struct ath_rx_status *rxs, uint64_t fulltsf,
|
|
const char *buf, HAL_DFS_EVENT *event);
|
|
HAL_BOOL __ahdecl(*ah_isFastClockEnabled)(struct ath_hal *ah);
|
|
void __ahdecl(*ah_setDfsCacTxQuiet)(struct ath_hal *, HAL_BOOL);
|
|
|
|
/* Spectral Scan functions */
|
|
void __ahdecl(*ah_spectralConfigure)(struct ath_hal *ah,
|
|
HAL_SPECTRAL_PARAM *sp);
|
|
void __ahdecl(*ah_spectralGetConfig)(struct ath_hal *ah,
|
|
HAL_SPECTRAL_PARAM *sp);
|
|
void __ahdecl(*ah_spectralStart)(struct ath_hal *);
|
|
void __ahdecl(*ah_spectralStop)(struct ath_hal *);
|
|
HAL_BOOL __ahdecl(*ah_spectralIsEnabled)(struct ath_hal *);
|
|
HAL_BOOL __ahdecl(*ah_spectralIsActive)(struct ath_hal *);
|
|
/* XXX getNfPri() and getNfExt() */
|
|
|
|
/* Key Cache Functions */
|
|
uint32_t __ahdecl(*ah_getKeyCacheSize)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_resetKeyCacheEntry)(struct ath_hal*, uint16_t);
|
|
HAL_BOOL __ahdecl(*ah_isKeyCacheEntryValid)(struct ath_hal *,
|
|
uint16_t);
|
|
HAL_BOOL __ahdecl(*ah_setKeyCacheEntry)(struct ath_hal*,
|
|
uint16_t, const HAL_KEYVAL *,
|
|
const uint8_t *, int);
|
|
HAL_BOOL __ahdecl(*ah_setKeyCacheEntryMac)(struct ath_hal*,
|
|
uint16_t, const uint8_t *);
|
|
|
|
/* Power Management Functions */
|
|
HAL_BOOL __ahdecl(*ah_setPowerMode)(struct ath_hal*,
|
|
HAL_POWER_MODE mode, int setChip);
|
|
HAL_POWER_MODE __ahdecl(*ah_getPowerMode)(struct ath_hal*);
|
|
int16_t __ahdecl(*ah_getChanNoise)(struct ath_hal *,
|
|
const struct ieee80211_channel *);
|
|
|
|
/* Beacon Management Functions */
|
|
void __ahdecl(*ah_setBeaconTimers)(struct ath_hal*,
|
|
const HAL_BEACON_TIMERS *);
|
|
/* NB: deprecated, use ah_setBeaconTimers instead */
|
|
void __ahdecl(*ah_beaconInit)(struct ath_hal *,
|
|
uint32_t nexttbtt, uint32_t intval);
|
|
void __ahdecl(*ah_setStationBeaconTimers)(struct ath_hal*,
|
|
const HAL_BEACON_STATE *);
|
|
void __ahdecl(*ah_resetStationBeaconTimers)(struct ath_hal*);
|
|
uint64_t __ahdecl(*ah_getNextTBTT)(struct ath_hal *);
|
|
|
|
/* 802.11n Functions */
|
|
HAL_BOOL __ahdecl(*ah_chainTxDesc)(struct ath_hal *,
|
|
struct ath_desc *,
|
|
HAL_DMA_ADDR *bufAddrList,
|
|
uint32_t *segLenList,
|
|
u_int, u_int, HAL_PKT_TYPE,
|
|
u_int, HAL_CIPHER, uint8_t, HAL_BOOL,
|
|
HAL_BOOL, HAL_BOOL);
|
|
HAL_BOOL __ahdecl(*ah_setupFirstTxDesc)(struct ath_hal *,
|
|
struct ath_desc *, u_int, u_int, u_int,
|
|
u_int, u_int, u_int, u_int, u_int);
|
|
HAL_BOOL __ahdecl(*ah_setupLastTxDesc)(struct ath_hal *,
|
|
struct ath_desc *, const struct ath_desc *);
|
|
void __ahdecl(*ah_set11nRateScenario)(struct ath_hal *,
|
|
struct ath_desc *, u_int, u_int,
|
|
HAL_11N_RATE_SERIES [], u_int, u_int);
|
|
|
|
/*
|
|
* The next 4 (set11ntxdesc -> set11naggrlast) are specific
|
|
* to the EDMA HAL. Descriptors are chained together by
|
|
* using filltxdesc (not ChainTxDesc) and then setting the
|
|
* aggregate flags appropriately using first/middle/last.
|
|
*/
|
|
void __ahdecl(*ah_set11nTxDesc)(struct ath_hal *,
|
|
void *, u_int, HAL_PKT_TYPE, u_int, u_int,
|
|
u_int);
|
|
void __ahdecl(*ah_set11nAggrFirst)(struct ath_hal *,
|
|
struct ath_desc *, u_int, u_int);
|
|
void __ahdecl(*ah_set11nAggrMiddle)(struct ath_hal *,
|
|
struct ath_desc *, u_int);
|
|
void __ahdecl(*ah_set11nAggrLast)(struct ath_hal *,
|
|
struct ath_desc *);
|
|
void __ahdecl(*ah_clr11nAggr)(struct ath_hal *,
|
|
struct ath_desc *);
|
|
void __ahdecl(*ah_set11nBurstDuration)(struct ath_hal *,
|
|
struct ath_desc *, u_int);
|
|
void __ahdecl(*ah_set11nVirtMoreFrag)(struct ath_hal *,
|
|
struct ath_desc *, u_int);
|
|
|
|
HAL_BOOL __ahdecl(*ah_getMibCycleCounts) (struct ath_hal *,
|
|
HAL_SURVEY_SAMPLE *);
|
|
|
|
uint32_t __ahdecl(*ah_get11nExtBusy)(struct ath_hal *);
|
|
void __ahdecl(*ah_set11nMac2040)(struct ath_hal *,
|
|
HAL_HT_MACMODE);
|
|
HAL_HT_RXCLEAR __ahdecl(*ah_get11nRxClear)(struct ath_hal *ah);
|
|
void __ahdecl(*ah_set11nRxClear)(struct ath_hal *,
|
|
HAL_HT_RXCLEAR);
|
|
|
|
/* Interrupt functions */
|
|
HAL_BOOL __ahdecl(*ah_isInterruptPending)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_getPendingInterrupts)(struct ath_hal*, HAL_INT*);
|
|
HAL_INT __ahdecl(*ah_getInterrupts)(struct ath_hal*);
|
|
HAL_INT __ahdecl(*ah_setInterrupts)(struct ath_hal*, HAL_INT);
|
|
|
|
/* Bluetooth Coexistence functions */
|
|
void __ahdecl(*ah_btCoexSetInfo)(struct ath_hal *,
|
|
HAL_BT_COEX_INFO *);
|
|
void __ahdecl(*ah_btCoexSetConfig)(struct ath_hal *,
|
|
HAL_BT_COEX_CONFIG *);
|
|
void __ahdecl(*ah_btCoexSetQcuThresh)(struct ath_hal *,
|
|
int);
|
|
void __ahdecl(*ah_btCoexSetWeights)(struct ath_hal *,
|
|
uint32_t);
|
|
void __ahdecl(*ah_btCoexSetBmissThresh)(struct ath_hal *,
|
|
uint32_t);
|
|
void __ahdecl(*ah_btCoexSetParameter)(struct ath_hal *,
|
|
uint32_t, uint32_t);
|
|
void __ahdecl(*ah_btCoexDisable)(struct ath_hal *);
|
|
int __ahdecl(*ah_btCoexEnable)(struct ath_hal *);
|
|
|
|
/* Bluetooth MCI methods */
|
|
void __ahdecl(*ah_btMciSetup)(struct ath_hal *,
|
|
uint32_t, void *, uint16_t, uint32_t);
|
|
HAL_BOOL __ahdecl(*ah_btMciSendMessage)(struct ath_hal *,
|
|
uint8_t, uint32_t, uint32_t *, uint8_t,
|
|
HAL_BOOL, HAL_BOOL);
|
|
uint32_t __ahdecl(*ah_btMciGetInterrupt)(struct ath_hal *,
|
|
uint32_t *, uint32_t *);
|
|
uint32_t __ahdecl(*ah_btMciState)(struct ath_hal *,
|
|
uint32_t, uint32_t *);
|
|
void __ahdecl(*ah_btMciDetach)(struct ath_hal *);
|
|
|
|
/* LNA diversity configuration */
|
|
void __ahdecl(*ah_divLnaConfGet)(struct ath_hal *,
|
|
HAL_ANT_COMB_CONFIG *);
|
|
void __ahdecl(*ah_divLnaConfSet)(struct ath_hal *,
|
|
HAL_ANT_COMB_CONFIG *);
|
|
};
|
|
|
|
/*
|
|
* Check the PCI vendor ID and device ID against Atheros' values
|
|
* and return a printable description for any Atheros hardware.
|
|
* AH_NULL is returned if the ID's do not describe Atheros hardware.
|
|
*/
|
|
extern const char *__ahdecl ath_hal_probe(uint16_t vendorid, uint16_t devid);
|
|
|
|
/*
|
|
* Attach the HAL for use with the specified device. The device is
|
|
* defined by the PCI device ID. The caller provides an opaque pointer
|
|
* to an upper-layer data structure (HAL_SOFTC) that is stored in the
|
|
* HAL state block for later use. Hardware register accesses are done
|
|
* using the specified bus tag and handle. On successful return a
|
|
* reference to a state block is returned that must be supplied in all
|
|
* subsequent HAL calls. Storage associated with this reference is
|
|
* dynamically allocated and must be freed by calling the ah_detach
|
|
* method when the client is done. If the attach operation fails a
|
|
* null (AH_NULL) reference will be returned and a status code will
|
|
* be returned if the status parameter is non-zero.
|
|
*/
|
|
extern struct ath_hal * __ahdecl ath_hal_attach(uint16_t devid, HAL_SOFTC,
|
|
HAL_BUS_TAG, HAL_BUS_HANDLE, uint16_t *eepromdata,
|
|
HAL_OPS_CONFIG *ah_config, HAL_STATUS* status);
|
|
|
|
extern const char *ath_hal_mac_name(struct ath_hal *);
|
|
extern const char *ath_hal_rf_name(struct ath_hal *);
|
|
|
|
/*
|
|
* Regulatory interfaces. Drivers should use ath_hal_init_channels to
|
|
* request a set of channels for a particular country code and/or
|
|
* regulatory domain. If CTRY_DEFAULT and SKU_NONE are specified then
|
|
* this list is constructed according to the contents of the EEPROM.
|
|
* ath_hal_getchannels acts similarly but does not alter the operating
|
|
* state; this can be used to collect information for a particular
|
|
* regulatory configuration. Finally ath_hal_set_channels installs a
|
|
* channel list constructed outside the driver. The HAL will adopt the
|
|
* channel list and setup internal state according to the specified
|
|
* regulatory configuration (e.g. conformance test limits).
|
|
*
|
|
* For all interfaces the channel list is returned in the supplied array.
|
|
* maxchans defines the maximum size of this array. nchans contains the
|
|
* actual number of channels returned. If a problem occurred then a
|
|
* status code != HAL_OK is returned.
|
|
*/
|
|
struct ieee80211_channel;
|
|
|
|
/*
|
|
* Return a list of channels according to the specified regulatory.
|
|
*/
|
|
extern HAL_STATUS __ahdecl ath_hal_getchannels(struct ath_hal *,
|
|
struct ieee80211_channel *chans, u_int maxchans, int *nchans,
|
|
u_int modeSelect, HAL_CTRY_CODE cc, HAL_REG_DOMAIN regDmn,
|
|
HAL_BOOL enableExtendedChannels);
|
|
|
|
/*
|
|
* Return a list of channels and install it as the current operating
|
|
* regulatory list.
|
|
*/
|
|
extern HAL_STATUS __ahdecl ath_hal_init_channels(struct ath_hal *,
|
|
struct ieee80211_channel *chans, u_int maxchans, int *nchans,
|
|
u_int modeSelect, HAL_CTRY_CODE cc, HAL_REG_DOMAIN rd,
|
|
HAL_BOOL enableExtendedChannels);
|
|
|
|
/*
|
|
* Install the list of channels as the current operating regulatory
|
|
* and setup related state according to the country code and sku.
|
|
*/
|
|
extern HAL_STATUS __ahdecl ath_hal_set_channels(struct ath_hal *,
|
|
struct ieee80211_channel *chans, int nchans,
|
|
HAL_CTRY_CODE cc, HAL_REG_DOMAIN regDmn);
|
|
|
|
/*
|
|
* Fetch the ctl/ext noise floor values reported by a MIMO
|
|
* radio. Returns 1 for valid results, 0 for invalid channel.
|
|
*/
|
|
extern int __ahdecl ath_hal_get_mimo_chan_noise(struct ath_hal *ah,
|
|
const struct ieee80211_channel *chan, int16_t *nf_ctl,
|
|
int16_t *nf_ext);
|
|
|
|
/*
|
|
* Calibrate noise floor data following a channel scan or similar.
|
|
* This must be called prior retrieving noise floor data.
|
|
*/
|
|
extern void __ahdecl ath_hal_process_noisefloor(struct ath_hal *ah);
|
|
|
|
/*
|
|
* Return bit mask of wireless modes supported by the hardware.
|
|
*/
|
|
extern u_int __ahdecl ath_hal_getwirelessmodes(struct ath_hal*);
|
|
|
|
/*
|
|
* Get the HAL wireless mode for the given channel.
|
|
*/
|
|
extern int ath_hal_get_curmode(struct ath_hal *ah,
|
|
const struct ieee80211_channel *chan);
|
|
|
|
/*
|
|
* Calculate the packet TX time for a legacy or 11n frame
|
|
*/
|
|
extern uint32_t __ahdecl ath_hal_pkt_txtime(struct ath_hal *ah,
|
|
const HAL_RATE_TABLE *rates, uint32_t frameLen,
|
|
uint16_t rateix, HAL_BOOL isht40, HAL_BOOL shortPreamble,
|
|
HAL_BOOL includeSifs);
|
|
|
|
/*
|
|
* Calculate the duration of an 11n frame.
|
|
*/
|
|
extern uint32_t __ahdecl ath_computedur_ht(uint32_t frameLen, uint16_t rate,
|
|
int streams, HAL_BOOL isht40, HAL_BOOL isShortGI);
|
|
|
|
/*
|
|
* Calculate the transmit duration of a legacy frame.
|
|
*/
|
|
extern uint16_t __ahdecl ath_hal_computetxtime(struct ath_hal *,
|
|
const HAL_RATE_TABLE *rates, uint32_t frameLen,
|
|
uint16_t rateix, HAL_BOOL shortPreamble,
|
|
HAL_BOOL includeSifs);
|
|
|
|
/*
|
|
* Adjust the TSF.
|
|
*/
|
|
extern void __ahdecl ath_hal_adjusttsf(struct ath_hal *ah, int32_t tsfdelta);
|
|
|
|
/*
|
|
* Enable or disable CCA.
|
|
*/
|
|
void __ahdecl ath_hal_setcca(struct ath_hal *ah, int ena);
|
|
|
|
/*
|
|
* Get CCA setting.
|
|
*/
|
|
int __ahdecl ath_hal_getcca(struct ath_hal *ah);
|
|
|
|
/*
|
|
* Enable/disable and get self-gen frame (ACK, CTS) for CAC.
|
|
*/
|
|
void __ahdecl ath_hal_set_dfs_cac_tx_quiet(struct ath_hal *ah, HAL_BOOL ena);
|
|
|
|
/*
|
|
* Read EEPROM data from ah_eepromdata
|
|
*/
|
|
HAL_BOOL __ahdecl ath_hal_EepromDataRead(struct ath_hal *ah,
|
|
u_int off, uint16_t *data);
|
|
|
|
/*
|
|
* For now, simply pass through MFP frames.
|
|
*/
|
|
static inline u_int32_t
|
|
ath_hal_get_mfp_qos(struct ath_hal *ah)
|
|
{
|
|
//return AH_PRIVATE(ah)->ah_mfp_qos;
|
|
return HAL_MFP_QOSDATA;
|
|
}
|
|
|
|
/*
|
|
* Convert between microseconds and core system clocks.
|
|
*/
|
|
extern u_int ath_hal_mac_clks(struct ath_hal *ah, u_int usecs);
|
|
extern u_int ath_hal_mac_usec(struct ath_hal *ah, u_int clks);
|
|
extern uint64_t ath_hal_mac_psec(struct ath_hal *ah, u_int clks);
|
|
|
|
#endif /* _ATH_AH_H_ */
|