freebsd-dev/sbin/camcontrol/persist.c
Kenneth D. Merry 08df2e3eaf Add persistent reservation support to camcontrol(8).
camcontrol(8) now supports a new 'persist' subcommand that allows users to
issue SCSI PERSISTENT RESERVE IN / OUT commands.

sbin/camcontrol/Makefile:
	Add persist.c.

sbin/camcontrol/persist.c:
	New persistent reservation support for camcontrol(8).

	We have support for all known operation modes for PERSISTENT RESERVE
	IN and PERSISTENT RESERVE OUT.
	exceptions noted above.

sbin/camcontrol/camcontrol.8:
	Document the new 'persist' subcommand.

	In the section on the Transport ID (-I) option, explain what
	Transport IDs for each protocol should look like.  At some point
	some of this information could probably get moved off in a
	separate man page, either on Transport IDs alone or a man page
	documenting the Transport ID parsing code.

	Add a number of examples of persistent reservation commands.
	Persistent Reservations are complex enough that the average user
	probably won't be able to get the commands exactly right by just
	reading the man page.  These examples show a few basic and
	advanced examples of how to use persistent reservations.

sbin/camcontrol/camcontrol.h:
	Move the definition for camcontrol_optret here, so we can use it
	for the persistent reservation code.

	Add a definition for the new scsipersist() function.

sbin/camcontrol/camcontrol.c:
	Add 'persist' to the list of subcommands.

	Document 'persist' in the help text.

sys/cam/scsi/scsi_all.c:
	Add the scsi_persistent_reserve_in() and
	scsi_persistent_reserve_out() CCB building functions.

	Add a new function, scsi_transportid_sbuf().  This takes a
	SCSI Transport ID (documented in SPC-4), and prints it to
	an sbuf(9).  There are some transports (like ATA, USB, and
	SSA) for which there is no transport defined.  We need to
	come up with a reasonable thing to do if we're presented
	with a Transport ID that claims to be for one of those
	protocols.

	Add new routines scsi_get_nv() and scsi_nv_to_str().

	These functions do a table lookup to go between a string and an
	integer.  There are lots of table lookups needed in the
	persistent reservation code in camcontrol(8).

	Add a new function, scsi_parse_transportid(), along with leaf node
	functions to parse:
	FC, 1394 and SAS (scsi_parse_transportid_64bit())
	iSCSI (scsi_parse_transportid_iscsi())
	SPI (scsi_parse_transportid_spi())
	RDMA (scsi_parse_transportid_rdma())
	PCIe (scsi_parse_transportid_sop())

	Transport IDs.  Given a string with the general form proto,id these
	functions create a SCSI Transport ID structure.

sys/cam/scsi/scsi_all.h:
	Update the various persistent reservation data structures to
	SPC4r36l, but also rename some fields that were previously
	obsolete with the proper names from older SCSI specs.  This
	allows using older, obsolete persistent reservation types when
	desired.

	Add function prototypes for the new persistent reservation CCB
	building functions.

	Add a data strucure for the READ FULL STATUS service action
	of the PERSISTENT RESERVE IN command.

	Add Transport ID structures for all protocols described in SPC-4.

	Add a new series of SCSI_PROTO_XXX definitions, and
	redefine other defines in terms of these new definitions.

	Add a prototype for scsi_transportid_sbuf().

	Change a couple of "obsolete" persistent reservation data
	structure fields into something more meaningful, based on
	what the field was called when it was defined in the spec.
	(e.g. SPC, SPC-2, etc.)

	Create a new define, SPRI_MAX_LEN, for the maximum allocation
	length allowed for the PERSISTENT RESERVE IN command.

	Add data structures and enumerations for the new name/value
	translation functions.

	Add data structures for SCSI over PCIe Routing IDs.

	Bring the PERSISTENT RESERVE OUT Register and Move parameter list
	structure (struct scsi_per_res_out_parms) up to date with SPC-4.

	Add a data structure for the transport IDs that can optionally be
	appended to the basic PERSISTENT RESERVE OUT parameter list.

	Move SCSI protocol macro definitions out of the VPD page 0x83
	definition and combine them with the more up to date protocol
	definitions higher in the file.

	Add function prototypes for scsi_nv_to_str(), scsi_get_nv(),
	scsi_parse_transportid_64bit(), scsi_parse_transportid_spi(),
	scsi_parse_transportid_rdma(), scsi_parse_transportid_iscsi(),
	scsi_parse_transportid_sop(), and scsi_parse_transportid().

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
2014-07-03 23:09:44 +00:00

967 lines
27 KiB
C

/*-
* Copyright (c) 2013 Spectra Logic Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* Authors: Ken Merry (Spectra Logic Corporation)
*/
/*
* SCSI Persistent Reservation support for camcontrol(8).
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/ioctl.h>
#include <sys/stdint.h>
#include <sys/types.h>
#include <sys/endian.h>
#include <sys/sbuf.h>
#include <sys/queue.h>
#include <stdio.h>
#include <stdlib.h>
#include <inttypes.h>
#include <unistd.h>
#include <string.h>
#include <strings.h>
#include <fcntl.h>
#include <ctype.h>
#include <limits.h>
#include <err.h>
#include <cam/cam.h>
#include <cam/cam_debug.h>
#include <cam/cam_ccb.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_pass.h>
#include <cam/scsi/scsi_message.h>
#include <camlib.h>
#include "camcontrol.h"
struct persist_transport_id {
struct scsi_transportid_header *hdr;
unsigned int alloc_len;
STAILQ_ENTRY(persist_transport_id) links;
};
/*
* Service Actions for PERSISTENT RESERVE IN.
*/
static struct scsi_nv persist_in_actions[] = {
{ "read_keys", SPRI_RK },
{ "read_reservation", SPRI_RR },
{ "report_capabilities", SPRI_RC },
{ "read_full_status", SPRI_RS }
};
/*
* Service Actions for PERSISTENT RESERVE OUT.
*/
static struct scsi_nv persist_out_actions[] = {
{ "register", SPRO_REGISTER },
{ "reserve", SPRO_RESERVE },
{ "release" , SPRO_RELEASE },
{ "clear", SPRO_CLEAR },
{ "preempt", SPRO_PREEMPT },
{ "preempt_abort", SPRO_PRE_ABO },
{ "register_ignore", SPRO_REG_IGNO },
{ "register_move", SPRO_REG_MOVE },
{ "replace_lost", SPRO_REPL_LOST_RES }
};
/*
* Known reservation scopes. As of SPC-4, only LU_SCOPE is used in the
* spec. The others are obsolete.
*/
static struct scsi_nv persist_scope_table[] = {
{ "lun", SPR_LU_SCOPE },
{ "extent", SPR_EXTENT_SCOPE },
{ "element", SPR_ELEMENT_SCOPE }
};
/*
* Reservation types. The longer name for a given reservation type is
* listed first, so that it makes more sense when we print out the
* reservation type. We step through the table linearly when looking for
* the text name for a particular numeric reservation type value.
*/
static struct scsi_nv persist_type_table[] = {
{ "read_shared", SPR_TYPE_RD_SHARED },
{ "write_exclusive", SPR_TYPE_WR_EX },
{ "wr_ex", SPR_TYPE_WR_EX },
{ "read_exclusive", SPR_TYPE_RD_EX },
{ "rd_ex", SPR_TYPE_RD_EX },
{ "exclusive_access", SPR_TYPE_EX_AC },
{ "ex_ac", SPR_TYPE_EX_AC },
{ "write_exclusive_reg_only", SPR_TYPE_WR_EX_RO },
{ "wr_ex_ro", SPR_TYPE_WR_EX_RO },
{ "exclusive_access_reg_only", SPR_TYPE_EX_AC_RO },
{ "ex_ac_ro", SPR_TYPE_EX_AC_RO },
{ "write_exclusive_all_regs", SPR_TYPE_WR_EX_AR },
{ "wr_ex_ar", SPR_TYPE_WR_EX_AR },
{ "exclusive_access_all_regs", SPR_TYPE_EX_AC_AR },
{ "ex_ac_ar", SPR_TYPE_EX_AC_AR }
};
/*
* Print out the standard scope/type field.
*/
static void
persist_print_scopetype(uint8_t scopetype)
{
const char *tmpstr;
int num_entries;
num_entries = sizeof(persist_scope_table) /
sizeof(persist_scope_table[0]);
tmpstr = scsi_nv_to_str(persist_scope_table, num_entries,
scopetype & SPR_SCOPE_MASK);
fprintf(stdout, "Scope: %s (%#x)\n", (tmpstr != NULL) ? tmpstr :
"Unknown", (scopetype & SPR_SCOPE_MASK) >> SPR_SCOPE_SHIFT);
num_entries = sizeof(persist_type_table) /
sizeof(persist_type_table[0]);
tmpstr = scsi_nv_to_str(persist_type_table, num_entries,
scopetype & SPR_TYPE_MASK);
fprintf(stdout, "Type: %s (%#x)\n", (tmpstr != NULL) ? tmpstr :
"Unknown", scopetype & SPR_TYPE_MASK);
}
static void
persist_print_transportid(uint8_t *buf, uint32_t len)
{
struct sbuf *sb;
sb = sbuf_new_auto();
if (sb == NULL)
fprintf(stderr, "Unable to allocate sbuf\n");
scsi_transportid_sbuf(sb, (struct scsi_transportid_header *)buf, len);
sbuf_finish(sb);
fprintf(stdout, "%s\n", sbuf_data(sb));
sbuf_delete(sb);
}
/*
* Print out a persistent reservation. This is used with the READ
* RESERVATION (0x01) service action of the PERSISTENT RESERVE IN command.
*/
static void
persist_print_res(struct scsi_per_res_in_header *hdr, uint32_t valid_len)
{
uint32_t length;
struct scsi_per_res_in_rsrv *res;
length = scsi_4btoul(hdr->length);
length = MIN(length, valid_len);
res = (struct scsi_per_res_in_rsrv *)hdr;
if (length < sizeof(res->data) - sizeof(res->data.extent_length)) {
if (length == 0)
fprintf(stdout, "No reservations.\n");
else
warnx("unable to print reservation, only got %u "
"valid bytes", length);
return;
}
fprintf(stdout, "PRgeneration: %#x\n",
scsi_4btoul(res->header.generation));
fprintf(stdout, "Reservation Key: %#jx\n",
(uintmax_t)scsi_8btou64(res->data.reservation));
fprintf(stdout, "Scope address: %#x\n",
scsi_4btoul(res->data.scope_addr));
persist_print_scopetype(res->data.scopetype);
fprintf(stdout, "Extent length: %u\n",
scsi_2btoul(res->data.extent_length));
}
/*
* Print out persistent reservation keys. This is used with the READ KEYS
* service action of the PERSISTENT RESERVE IN command.
*/
static void
persist_print_keys(struct scsi_per_res_in_header *hdr, uint32_t valid_len)
{
uint32_t length, num_keys, i;
struct scsi_per_res_key *key;
length = scsi_4btoul(hdr->length);
length = MIN(length, valid_len);
num_keys = length / sizeof(*key);
fprintf(stdout, "PRgeneration: %#x\n", scsi_4btoul(hdr->generation));
fprintf(stdout, "%u key%s%s\n", num_keys, (num_keys == 1) ? "" : "s",
(num_keys == 0) ? "." : ":");
for (i = 0, key = (struct scsi_per_res_key *)&hdr[1]; i < num_keys;
i++, key++) {
fprintf(stdout, "%u: %#jx\n", i,
(uintmax_t)scsi_8btou64(key->key));
}
}
/*
* Print out persistent reservation capabilities. This is used with the
* REPORT CAPABILITIES service action of the PERSISTENT RESERVE IN command.
*/
static void
persist_print_cap(struct scsi_per_res_cap *cap, uint32_t valid_len)
{
uint32_t length;
int check_type_mask = 0;
length = scsi_2btoul(cap->length);
length = MIN(length, valid_len);
if (length < __offsetof(struct scsi_per_res_cap, type_mask)) {
fprintf(stdout, "Insufficient data (%u bytes) to report "
"full capabilities\n", length);
return;
}
if (length >= __offsetof(struct scsi_per_res_cap, reserved))
check_type_mask = 1;
fprintf(stdout, "Replace Lost Reservation Capable (RLR_C): %d\n",
(cap->flags1 & SPRI_RLR_C) ? 1 : 0);
fprintf(stdout, "Compatible Reservation Handling (CRH): %d\n",
(cap->flags1 & SPRI_CRH) ? 1 : 0);
fprintf(stdout, "Specify Initiator Ports Capable (SIP_C): %d\n",
(cap->flags1 & SPRI_SIP_C) ? 1 : 0);
fprintf(stdout, "All Target Ports Capable (ATP_C): %d\n",
(cap->flags1 & SPRI_ATP_C) ? 1 : 0);
fprintf(stdout, "Persist Through Power Loss Capable (PTPL_C): %d\n",
(cap->flags1 & SPRI_PTPL_C) ? 1 : 0);
fprintf(stdout, "ALLOW COMMANDS field: (%#x)\n",
(cap->flags2 & SPRI_ALLOW_CMD_MASK) >> SPRI_ALLOW_CMD_SHIFT);
/*
* These cases are cut-and-pasted from SPC4r36l. There is no
* succinct way to describe these otherwise, and even with the
* verbose description, the user will probably have to refer to
* the spec to fully understand what is going on.
*/
switch (cap->flags2 & SPRI_ALLOW_CMD_MASK) {
case SPRI_ALLOW_1:
fprintf(stdout,
" The device server allows the TEST UNIT READY command through Write\n"
" Exclusive type reservations and Exclusive Access type reservations\n"
" and does not provide information about whether the following commands\n"
" are allowed through Write Exclusive type reservations:\n"
" a) the MODE SENSE command, READ ATTRIBUTE command, READ BUFFER\n"
" command, RECEIVE COPY RESULTS command, RECEIVE DIAGNOSTIC\n"
" RESULTS command, REPORT SUPPORTED OPERATION CODES command,\n"
" and REPORT SUPPORTED TASK MANAGEMENT FUNCTION command; and\n"
" b) the READ DEFECT DATA command (see SBC-3).\n");
break;
case SPRI_ALLOW_2:
fprintf(stdout,
" The device server allows the TEST UNIT READY command through Write\n"
" Exclusive type reservations and Exclusive Access type reservations\n"
" and does not allow the following commands through Write Exclusive type\n"
" reservations:\n"
" a) the MODE SENSE command, READ ATTRIBUTE command, READ BUFFER\n"
" command, RECEIVE DIAGNOSTIC RESULTS command, REPORT SUPPORTED\n"
" OPERATION CODES command, and REPORT SUPPORTED TASK MANAGEMENT\n"
" FUNCTION command; and\n"
" b) the READ DEFECT DATA command.\n"
" The device server does not allow the RECEIVE COPY RESULTS command\n"
" through Write Exclusive type reservations or Exclusive Access type\n"
" reservations.\n");
break;
case SPRI_ALLOW_3:
fprintf(stdout,
" The device server allows the TEST UNIT READY command through Write\n"
" Exclusive type reservations and Exclusive Access type reservations\n"
" and allows the following commands through Write Exclusive type\n"
" reservations:\n"
" a) the MODE SENSE command, READ ATTRIBUTE command, READ BUFFER\n"
" command, RECEIVE DIAGNOSTIC RESULTS command, REPORT SUPPORTED\n"
" OPERATION CODES command, and REPORT SUPPORTED TASK MANAGEMENT\n"
" FUNCTION command; and\n"
" b) the READ DEFECT DATA command.\n"
" The device server does not allow the RECEIVE COPY RESULTS command\n"
" through Write Exclusive type reservations or Exclusive Access type\n"
" reservations.\n");
break;
case SPRI_ALLOW_4:
fprintf(stdout,
" The device server allows the TEST UNIT READY command and the RECEIVE\n"
" COPY RESULTS command through Write Exclusive type reservations and\n"
" Exclusive Access type reservations and allows the following commands\n"
" through Write Exclusive type reservations:\n"
" a) the MODE SENSE command, READ ATTRIBUTE command, READ BUFFER\n"
" command, RECEIVE DIAGNOSTIC RESULTS command, REPORT SUPPORTED\n"
" OPERATION CODES command, and REPORT SUPPORTED TASK MANAGEMENT\n"
" FUNCTION command; and\n"
" b) the READ DEFECT DATA command.\n");
break;
case SPRI_ALLOW_NA:
fprintf(stdout,
" No information is provided about whether certain commands are allowed\n"
" through certain types of persistent reservations.\n");
break;
default:
fprintf(stdout,
" Unknown ALLOW COMMANDS value %#x\n",
(cap->flags2 & SPRI_ALLOW_CMD_MASK) >>
SPRI_ALLOW_CMD_SHIFT);
break;
}
fprintf(stdout, "Persist Through Power Loss Activated (PTPL_A): %d\n",
(cap->flags2 & SPRI_PTPL_A) ? 1 : 0);
if ((check_type_mask != 0)
&& (cap->flags2 & SPRI_TMV)) {
fprintf(stdout, "Supported Persistent Reservation Types:\n");
fprintf(stdout, " Write Exclusive - All Registrants "
"(WR_EX_AR): %d\n",
(cap->type_mask[0] & SPRI_TM_WR_EX_AR)? 1 : 0);
fprintf(stdout, " Exclusive Access - Registrants Only "
"(EX_AC_RO): %d\n",
(cap->type_mask[0] & SPRI_TM_EX_AC_RO) ? 1 : 0);
fprintf(stdout, " Write Exclusive - Registrants Only "
"(WR_EX_RO): %d\n",
(cap->type_mask[0] & SPRI_TM_WR_EX_RO)? 1 : 0);
fprintf(stdout, " Exclusive Access (EX_AC): %d\n",
(cap->type_mask[0] & SPRI_TM_EX_AC) ? 1 : 0);
fprintf(stdout, " Write Exclusive (WR_EX): %d\n",
(cap->type_mask[0] & SPRI_TM_WR_EX) ? 1 : 0);
fprintf(stdout, " Exclusive Access - All Registrants "
"(EX_AC_AR): %d\n",
(cap->type_mask[1] & SPRI_TM_EX_AC_AR) ? 1 : 0);
} else {
fprintf(stdout, "Persistent Reservation Type Mask is NOT "
"valid\n");
}
}
static void
persist_print_full(struct scsi_per_res_in_header *hdr, uint32_t valid_len)
{
uint32_t length, len_to_go = 0;
struct scsi_per_res_in_full_desc *desc;
uint8_t *cur_pos;
int i;
length = scsi_4btoul(hdr->length);
length = MIN(length, valid_len);
if (length < sizeof(*desc)) {
if (length == 0)
fprintf(stdout, "No reservations.\n");
else
warnx("unable to print reservation, only got %u "
"valid bytes", length);
return;
}
fprintf(stdout, "PRgeneration: %#x\n", scsi_4btoul(hdr->generation));
cur_pos = (uint8_t *)&hdr[1];
for (len_to_go = length, i = 0,
desc = (struct scsi_per_res_in_full_desc *)cur_pos;
len_to_go >= sizeof(*desc);
desc = (struct scsi_per_res_in_full_desc *)cur_pos, i++) {
uint32_t additional_length, cur_length;
fprintf(stdout, "Reservation Key: %#jx\n",
(uintmax_t)scsi_8btou64(desc->res_key.key));
fprintf(stdout, "All Target Ports (ALL_TG_PT): %d\n",
(desc->flags & SPRI_FULL_ALL_TG_PT) ? 1 : 0);
fprintf(stdout, "Reservation Holder (R_HOLDER): %d\n",
(desc->flags & SPRI_FULL_R_HOLDER) ? 1 : 0);
if (desc->flags & SPRI_FULL_R_HOLDER)
persist_print_scopetype(desc->scopetype);
if ((desc->flags & SPRI_FULL_ALL_TG_PT) == 0)
fprintf(stdout, "Relative Target Port ID: %#x\n",
scsi_2btoul(desc->rel_trgt_port_id));
additional_length = scsi_4btoul(desc->additional_length);
persist_print_transportid(desc->transport_id,
additional_length);
cur_length = sizeof(*desc) + additional_length;
len_to_go -= cur_length;
cur_pos += cur_length;
}
}
int
scsipersist(struct cam_device *device, int argc, char **argv, char *combinedopt,
int retry_count, int timeout, int verbosemode, int err_recover)
{
union ccb *ccb = NULL;
int c, in = 0, out = 0;
int action = -1, num_ids = 0;
int error = 0;
uint32_t res_len = 0;
unsigned long rel_tgt_port = 0;
uint8_t *res_buf = NULL;
int scope = SPR_LU_SCOPE, res_type = 0, key_set = 0, sa_key_set = 0;
struct persist_transport_id *id, *id2;
STAILQ_HEAD(, persist_transport_id) transport_id_list;
uint64_t key = 0, sa_key = 0;
struct scsi_nv *table = NULL;
size_t table_size = 0, id_len = 0;
uint32_t valid_len = 0;
int all_tg_pt = 0, aptpl = 0, spec_i_pt = 0, unreg = 0,rel_port_set = 0;
STAILQ_INIT(&transport_id_list);
ccb = cam_getccb(device);
if (ccb == NULL) {
warnx("%s: error allocating CCB", __func__);
error = 1;
goto bailout;
}
bzero(&(&ccb->ccb_h)[1],
sizeof(union ccb) - sizeof(struct ccb_hdr));
while ((c = getopt(argc, argv, combinedopt)) != -1) {
switch (c) {
case 'a':
all_tg_pt = 1;
break;
case 'I': {
int error_str_len = 128;
char error_str[error_str_len];
char *id_str;
id = malloc(sizeof(*id));
if (id == NULL) {
warnx("%s: error allocating %zu bytes",
__func__, sizeof(*id));
error = 1;
goto bailout;
}
bzero(id, sizeof(*id));
id_str = strdup(optarg);
if (id_str == NULL) {
warnx("%s: error duplicating string %s",
__func__, optarg);
free(id);
error = 1;
goto bailout;
}
error = scsi_parse_transportid(id_str, &id->hdr,
&id->alloc_len, error_str, error_str_len);
if (error != 0) {
warnx("%s", error_str);
error = 1;
free(id);
free(id_str);
goto bailout;
}
free(id_str);
STAILQ_INSERT_TAIL(&transport_id_list, id, links);
num_ids++;
id_len += id->alloc_len;
break;
}
case 'k':
case 'K': {
char *endptr;
uint64_t tmpval;
tmpval = strtoumax(optarg, &endptr, 0);
if (*endptr != '\0') {
warnx("%s: invalid key argument %s", __func__,
optarg);
error = 1;
goto bailout;
}
if (c == 'k') {
key = tmpval;
key_set = 1;
} else {
sa_key = tmpval;
sa_key_set = 1;
}
break;
}
case 'i':
case 'o': {
scsi_nv_status status;
int table_entry = 0;
if (c == 'i') {
in = 1;
table = persist_in_actions;
table_size = sizeof(persist_in_actions) /
sizeof(persist_in_actions[0]);
} else {
out = 1;
table = persist_out_actions;
table_size = sizeof(persist_out_actions) /
sizeof(persist_out_actions[0]);
}
if ((in + out) > 1) {
warnx("%s: only one in (-i) or out (-o) "
"action is allowed", __func__);
error = 1;
goto bailout;
}
status = scsi_get_nv(table, table_size, optarg,
&table_entry,SCSI_NV_FLAG_IG_CASE);
if (status == SCSI_NV_FOUND)
action = table[table_entry].value;
else {
warnx("%s: %s %s option %s", __func__,
(status == SCSI_NV_AMBIGUOUS) ?
"ambiguous" : "invalid", in ? "in" :
"out", optarg);
error = 1;
goto bailout;
}
break;
}
case 'p':
aptpl = 1;
break;
case 'R': {
char *endptr;
rel_tgt_port = strtoul(optarg, &endptr, 0);
if (*endptr != '\0') {
warnx("%s: invalid relative target port %s",
__func__, optarg);
error = 1;
goto bailout;
}
rel_port_set = 1;
break;
}
case 's': {
size_t scope_size;
struct scsi_nv *scope_table = NULL;
scsi_nv_status status;
int table_entry = 0;
char *endptr;
/*
* First check to see if the user gave us a numeric
* argument. If so, we'll try using it.
*/
if (isdigit(optarg[0])) {
scope = strtol(optarg, &endptr, 0);
if (*endptr != '\0') {
warnx("%s: invalid scope %s",
__func__, optarg);
error = 1;
goto bailout;
}
scope = (scope << SPR_SCOPE_SHIFT) &
SPR_SCOPE_MASK;
break;
}
scope_size = sizeof(persist_scope_table) /
sizeof(persist_scope_table[0]);
scope_table = persist_scope_table;
status = scsi_get_nv(scope_table, scope_size, optarg,
&table_entry,SCSI_NV_FLAG_IG_CASE);
if (status == SCSI_NV_FOUND)
scope = scope_table[table_entry].value;
else {
warnx("%s: %s scope %s", __func__,
(status == SCSI_NV_AMBIGUOUS) ?
"ambiguous" : "invalid", optarg);
error = 1;
goto bailout;
}
break;
}
case 'S':
spec_i_pt = 1;
break;
case 'T': {
size_t res_type_size;
struct scsi_nv *rtype_table = NULL;
scsi_nv_status status;
char *endptr;
int table_entry = 0;
/*
* First check to see if the user gave us a numeric
* argument. If so, we'll try using it.
*/
if (isdigit(optarg[0])) {
res_type = strtol(optarg, &endptr, 0);
if (*endptr != '\0') {
warnx("%s: invalid reservation type %s",
__func__, optarg);
error = 1;
goto bailout;
}
break;
}
res_type_size = sizeof(persist_type_table) /
sizeof(persist_type_table[0]);
rtype_table = persist_type_table;
status = scsi_get_nv(rtype_table, res_type_size,
optarg, &table_entry,
SCSI_NV_FLAG_IG_CASE);
if (status == SCSI_NV_FOUND)
res_type = rtype_table[table_entry].value;
else {
warnx("%s: %s reservation type %s", __func__,
(status == SCSI_NV_AMBIGUOUS) ?
"ambiguous" : "invalid", optarg);
error = 1;
goto bailout;
}
break;
}
case 'U':
unreg = 1;
break;
default:
break;
}
}
if ((in + out) != 1) {
warnx("%s: you must specify one of -i or -o", __func__);
error = 1;
goto bailout;
}
/*
* Note that we don't really try to figure out whether the user
* needs to specify one or both keys. There are a number of
* scenarios, and sometimes 0 is a valid and desired value.
*/
if (in != 0) {
switch (action) {
case SPRI_RK:
case SPRI_RR:
case SPRI_RS:
/*
* Allocate the maximum length possible for these
* service actions. According to the spec, the
* target is supposed to return the available
* length in the header, regardless of the
* allocation length. In practice, though, with
* the READ FULL STATUS (SPRI_RS) service action,
* some Seagate drives (in particular a
* Constellation ES, <SEAGATE ST32000444SS 0006>)
* don't return the available length if you only
* allocate the length of the header. So just
* allocate the maximum here so we don't miss
* anything.
*/
res_len = SPRI_MAX_LEN;
break;
case SPRI_RC:
res_len = sizeof(struct scsi_per_res_cap);
break;
default:
/* In theory we should catch this above */
warnx("%s: invalid action %d", __func__, action);
error = 1;
goto bailout;
break;
}
} else {
/*
* XXX KDM need to add length for transport IDs for the
* register and move service action and the register
* service action with the SPEC_I_PT bit set.
*/
if (action == SPRO_REG_MOVE) {
if (num_ids != 1) {
warnx("%s: register and move requires a "
"single transport ID (-I)", __func__);
error = 1;
goto bailout;
}
if (rel_port_set == 0) {
warnx("%s: register and move requires a "
"relative target port (-R)", __func__);
error = 1;
goto bailout;
}
res_len = sizeof(struct scsi_per_res_reg_move) + id_len;
} else {
res_len = sizeof(struct scsi_per_res_out_parms);
if ((action == SPRO_REGISTER)
&& (num_ids != 0)) {
/*
* If the user specifies any IDs with the
* register service action, turn on the
* spec_i_pt bit.
*/
spec_i_pt = 1;
res_len += id_len;
res_len +=
sizeof(struct scsi_per_res_out_trans_ids);
}
}
}
retry:
if (res_buf != NULL) {
free(res_buf);
res_buf = NULL;
}
res_buf = malloc(res_len);
if (res_buf == NULL) {
warn("%s: error allocating %d bytes", __func__, res_len);
error = 1;
goto bailout;
}
bzero(res_buf, res_len);
if (in != 0) {
scsi_persistent_reserve_in(&ccb->csio,
/*retries*/ retry_count,
/*cbfcnp*/ NULL,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*service_action*/ action,
/*data_ptr*/ res_buf,
/*dxfer_len*/ res_len,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ timeout ? timeout :5000);
} else {
switch (action) {
case SPRO_REGISTER:
if (spec_i_pt != 0) {
struct scsi_per_res_out_trans_ids *id_hdr;
uint8_t *bufptr;
bufptr = res_buf +
sizeof(struct scsi_per_res_out_parms) +
sizeof(struct scsi_per_res_out_trans_ids);
STAILQ_FOREACH(id, &transport_id_list, links) {
bcopy(id->hdr, bufptr, id->alloc_len);
bufptr += id->alloc_len;
}
id_hdr = (struct scsi_per_res_out_trans_ids *)
(res_buf +
sizeof(struct scsi_per_res_out_parms));
scsi_ulto4b(id_len, id_hdr->additional_length);
}
case SPRO_REG_IGNO:
case SPRO_PREEMPT:
case SPRO_PRE_ABO:
case SPRO_RESERVE:
case SPRO_RELEASE:
case SPRO_CLEAR:
case SPRO_REPL_LOST_RES: {
struct scsi_per_res_out_parms *parms;
parms = (struct scsi_per_res_out_parms *)res_buf;
scsi_u64to8b(key, parms->res_key.key);
scsi_u64to8b(sa_key, parms->serv_act_res_key);
if (spec_i_pt != 0)
parms->flags |= SPR_SPEC_I_PT;
if (all_tg_pt != 0)
parms->flags |= SPR_ALL_TG_PT;
if (aptpl != 0)
parms->flags |= SPR_APTPL;
break;
}
case SPRO_REG_MOVE: {
struct scsi_per_res_reg_move *reg_move;
uint8_t *bufptr;
reg_move = (struct scsi_per_res_reg_move *)res_buf;
scsi_u64to8b(key, reg_move->res_key.key);
scsi_u64to8b(sa_key, reg_move->serv_act_res_key);
if (unreg != 0)
reg_move->flags |= SPR_REG_MOVE_UNREG;
if (aptpl != 0)
reg_move->flags |= SPR_REG_MOVE_APTPL;
scsi_ulto2b(rel_tgt_port, reg_move->rel_trgt_port_id);
id = STAILQ_FIRST(&transport_id_list);
/*
* This shouldn't happen, since we already checked
* the number of IDs above.
*/
if (id == NULL) {
warnx("%s: No transport IDs found!", __func__);
error = 1;
goto bailout;
}
bufptr = (uint8_t *)&reg_move[1];
bcopy(id->hdr, bufptr, id->alloc_len);
scsi_ulto4b(id->alloc_len,
reg_move->transport_id_length);
break;
}
default:
break;
}
scsi_persistent_reserve_out(&ccb->csio,
/*retries*/ retry_count,
/*cbfcnp*/ NULL,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*service_action*/ action,
/*scope*/ scope,
/*res_type*/ res_type,
/*data_ptr*/ res_buf,
/*dxfer_len*/ res_len,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ timeout ?timeout :5000);
}
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (err_recover != 0)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
if (cam_send_ccb(device, ccb) < 0) {
warn("error sending PERSISTENT RESERVE %s", (in != 0) ?
"IN" : "OUT");
if (verbosemode != 0) {
cam_error_print(device, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
}
error = 1;
goto bailout;
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if (verbosemode != 0) {
cam_error_print(device, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
}
error = 1;
goto bailout;
}
if (in == 0)
goto bailout;
valid_len = res_len - ccb->csio.resid;
switch (action) {
case SPRI_RK:
case SPRI_RR:
case SPRI_RS: {
struct scsi_per_res_in_header *hdr;
uint32_t hdr_len;
if (valid_len < sizeof(*hdr)) {
warnx("%s: only got %d valid bytes, need %zd",
__func__, valid_len, sizeof(*hdr));
error = 1;
goto bailout;
}
hdr = (struct scsi_per_res_in_header *)res_buf;
hdr_len = scsi_4btoul(hdr->length);
if (hdr_len > (res_len - sizeof(*hdr))) {
res_len = hdr_len + sizeof(*hdr);
goto retry;
}
if (action == SPRI_RK) {
persist_print_keys(hdr, valid_len);
} else if (action == SPRI_RR) {
persist_print_res(hdr, valid_len);
} else {
persist_print_full(hdr, valid_len);
}
break;
}
case SPRI_RC: {
struct scsi_per_res_cap *cap;
uint32_t cap_len;
if (valid_len < sizeof(*cap)) {
warnx("%s: only got %u valid bytes, need %zd",
__func__, valid_len, sizeof(*cap));
error = 1;
goto bailout;
}
cap = (struct scsi_per_res_cap *)res_buf;
cap_len = scsi_2btoul(cap->length);
if (cap_len != sizeof(*cap)) {
/*
* We should be able to deal with this,
* it's just more trouble.
*/
warnx("%s: reported size %u is different "
"than expected size %zd", __func__,
cap_len, sizeof(*cap));
}
/*
* If there is more data available, grab it all,
* even though we don't really know what to do with
* the extra data since it obviously wasn't in the
* spec when this code was written.
*/
if (cap_len > res_len) {
res_len = cap_len;
goto retry;
}
persist_print_cap(cap, valid_len);
break;
}
default:
break;
}
bailout:
free(res_buf);
if (ccb != NULL)
cam_freeccb(ccb);
STAILQ_FOREACH_SAFE(id, &transport_id_list, links, id2) {
STAILQ_REMOVE(&transport_id_list, id, persist_transport_id,
links);
free(id);
}
return (error);
}