freebsd-dev/sys/arm/at91/at91_usartreg.h
Warner Losh f535b19502 Remove unused bit definitions.
Minor style cleanup while I'm here.
2006-04-06 04:29:24 +00:00

129 lines
6.2 KiB
C

/*-
* Copyright (c) 2005 Olivier Houchard. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $FreeBSD$ */
#ifndef AT91USARTREG_H_
#define AT91USARTREG_H_
#define USART_CR 0x00 /* Control register */
#define USART_CR_RSTRX (1UL << 2) /* Reset Receiver */
#define USART_CR_RSTTX (1UL << 3) /* Reset Transmitter */
#define USART_CR_RXEN (1UL << 4) /* Receiver Enable */
#define USART_CR_RXDIS (1UL << 5) /* Receiver Disable */
#define USART_CR_TXEN (1UL << 6) /* Transmitter Enable */
#define USART_CR_TXDIS (1UL << 7) /* Transmitter Disable */
#define USART_CR_RSTSTA (1UL << 8) /* Reset Status Bits */
#define USART_CR_STTBRK (1UL << 9) /* Start Break */
#define USART_CR_STPBRK (1UL << 10) /* Stop Break */
#define USART_CR_STTTO (1UL << 11) /* Start Time-out */
#define USART_CR_SENDA (1UL << 12) /* Send Address */
#define USART_CR_RSTIT (1UL << 13) /* Reset Iterations */
#define USART_CR_RSTNACK (1UL << 14) /* Reset Non Acknowledge */
#define USART_CR_RETTO (1UL << 15) /* Rearm Time-out */
#define USART_CR_DTREN (1UL << 16) /* Data Terminal ready Enable */
#define USART_CR_DTRDIS (1UL << 17) /* Data Terminal ready Disable */
#define USART_CR_RTSEN (1UL << 18) /* Request to Send enable */
#define USART_CR_RTSDIS (1UL << 19) /* Request to Send Disable */
#define USART_MR 0x04 /* Mode register */
#define USART_MR_MODE_NORMAL 0 /* Normal/Async/3-wire rs-232 */
#define USART_MR_MODE_RS485 1 /* RS485 */
#define USART_MR_MODE_HWFLOW 2 /* Hardware flow control/handshake */
#define USART_MR_MODE_MODEM 3 /* Full modem protocol */
#define USART_MR_MODE_ISO7816T0 4 /* ISO7816 T=0 */
#define USART_MR_MODE_ISO7816T1 6 /* ISO7816 T=1 */
#define USART_MR_MODE_IRDA 8 /* IrDA mode */
#define USART_MR_USCLKS_MCK (0U << 4) /* use MCK for baudclock */
#define USART_MR_USCLKS_MCKDIV (1U << 4) /* use MCK/DIV for baudclock */
#define USART_MR_USCLKS_SCK (3U << 4) /* use SCK (ext) for baudclock */
#define USART_MR_CHRL_5BITS (0U << 6)
#define USART_MR_CHRL_6BITS (1U << 6)
#define USART_MR_CHRL_7BITS (2U << 6)
#define USART_MR_CHRL_8BITS (3U << 6)
#define USART_MR_SYNC (1U << 8) /* 1 -> sync 0 -> async */
#define USART_MR_PAR_EVEN (0U << 9)
#define USART_MR_PAR_ODD (1U << 9)
#define USART_MR_PAR_SPACE (2U << 9)
#define USART_MR_PAR_MARK (3U << 9)
#define USART_MR_PAR_NONE (4U << 9)
#define USART_MR_PAR_MULTIDROP (6U << 9)
#define USART_MR_NBSTOP_1 (0U << 12)
#define USART_MR_NBSTOP_1_5 (1U << 12)
#define USART_MR_NBSTOP_2 (2U << 12)
#define USART_MR_CHMODE_NORMAL (0U << 14)
#define USART_MR_CHMODE_ECHO (1U << 14)
#define USART_MR_CHMODE_LOOP (2U << 14)
#define USART_MR_CHMODE_REMLOOP (3U << 14)
#define USART_MR_MSBF (1U << 16)
#define USART_MR_MODE9 (1U << 17)
#define USART_MR_CKLO_SCK (1U << 18)
#define USART_MR_OVER16 0
#define USART_MR_OVER8 (1U << 19)
#define USART_MR_INACK (1U << 20) /* Inhibit NACK generation */
#define USART_MR_DSNACK (1U << 21) /* Disable Successive NACK */
#define USART_MR_MAXITERATION(x) ((x) << 24)
#define USART_MR_FILTER (1U << 28) /* Filters for Ir lines */
#define USART_IER 0x08 /* Interrupt enable register */
#define USART_IDR 0x0c /* Interrupt disable register */
#define USART_IMR 0x10 /* Interrupt mask register */
#define USART_CSR 0x14 /* Channel status register */
#define USART_CSR_RXRDY (1UL << 0) /* Receiver ready */
#define USART_CSR_TXRDY (1UL << 1) /* Transmitter ready */
#define USART_CSR_RXBRK (1UL << 2) /* Break received */
#define USART_CSR_ENDRX (1UL << 3) /* End of Transfer RX from PDC */
#define USART_CSR_ENDTX (1UL << 4) /* End of Transfer TX from PDC */
#define USART_CSR_OVRE (1UL << 5) /* Overrun error */
#define USART_CSR_FRAME (1UL << 6) /* Framing error */
#define USART_CSR_PARE (1UL << 7) /* Parity Error */
#define USART_CSR_TIMEOUT (1UL << 8) /* Timeout since start-timeout */
#define USART_CSR_TXEMPTY (1UL << 9) /* Transmitter empty */
#define USART_CSR_ITERATION (1UL << 10) /* max repetitions since RSIT */
#define USART_CSR_TXBUFE (1UL << 11) /* Buffer empty from PDC */
#define USART_CSR_RXBUFF (1UL << 12) /* Buffer full from PDC */
#define USART_CSR_NACK (1UL << 13) /* NACK since last RSTNACK */
#define USART_CSR_RIIC (1UL << 16) /* RI delta since last csr read */
#define USART_CSR_DSRIC (1UL << 17) /* DSR delta */
#define USART_CSR_DCDIC (1UL << 18) /* DCD delta */
#define USART_CSR_CTSIC (1UL << 19) /* CTS delta */
#define USART_CSR_RI (1UL << 20) /* RI status */
#define USART_CSR_DSR (1UL << 21) /* DSR status */
#define USART_CSR_DCD (1UL << 22) /* DCD status */
#define USART_CSR_CTS (1UL << 23) /* CTS status */
#define USART_RHR 0x18 /* Receiver holding register */
#define USART_THR 0x1c /* Transmitter holding register */
#define USART_BRGR 0x20 /* Baud rate generator register */
#define USART_RTOR 0x24 /* Receiver time-out register */
#define USART_TTR 0x28 /* Transmitter timeguard register */
/* 0x2c to 0x3c reserved */
#define USART_FDRR 0x40 /* FI DI ratio register */
#define USART_NER 0x44 /* Number of errors register */
/* 0x48 reserved */
#define USART_IFR 0x48 /* IrDA filter register */
#endif /* AT91RM92REG_H_ */