freebsd-dev/sys/mips/rmi/iodi.c
Justin Hibbits da1b038af9 Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit.  This extends rman's resources to uintmax_t.  With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t?  Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures.  64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead.  That being said, uintmax_t was chosen for source
clarity.  If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros.  Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros.  Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes:	Yes
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00

276 lines
7.7 KiB
C

/*-
* Copyright (c) 2003-2009 RMI Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of RMI Corporation, nor the names of its contributors,
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* RMI_BSD
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#define __RMAN_RESOURCE_VISIBLE
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/reboot.h>
#include <sys/rman.h>
#include <sys/types.h>
#include <sys/malloc.h>
#include <sys/interrupt.h>
#include <sys/module.h>
#include <machine/cpu.h>
#include <machine/bus.h>
#include <machine/intr_machdep.h>
#include <machine/clock.h> /* for DELAY */
#include <machine/resource.h>
#include <mips/rmi/board.h>
#include <mips/rmi/pic.h>
#include <mips/rmi/interrupt.h>
#include <mips/rmi/msgring.h>
#include <mips/rmi/iomap.h>
#include <mips/rmi/rmi_mips_exts.h>
#include <mips/rmi/dev/xlr/atx_cpld.h>
#include <mips/rmi/dev/xlr/xgmac_mdio.h>
extern bus_space_tag_t uart_bus_space_mem;
static struct resource *
iodi_alloc_resource(device_t, device_t, int, int *,
rman_res_t, rman_res_t, rman_res_t, u_int);
static int
iodi_activate_resource(device_t, device_t, int, int,
struct resource *);
static int
iodi_setup_intr(device_t, device_t, struct resource *, int,
driver_filter_t *, driver_intr_t *, void *, void **);
struct iodi_softc *iodi_softc; /* There can be only one. */
/*
* We will manage the Flash/PCMCIA devices in IODI for now.
* The NOR flash, Compact flash etc. which can be connected on
* various chip selects on the peripheral IO, should have a
* separate bus later.
*/
static void
bridge_pcmcia_ack(int irq)
{
xlr_reg_t *mmio = xlr_io_mmio(XLR_IO_FLASH_OFFSET);
xlr_write_reg(mmio, 0x60, 0xffffffff);
}
static int
iodi_setup_intr(device_t dev, device_t child,
struct resource *ires, int flags, driver_filter_t *filt,
driver_intr_t *intr, void *arg, void **cookiep)
{
const char *name = device_get_name(child);
if (strcmp(name, "uart") == 0) {
/* FIXME uart 1? */
cpu_establish_hardintr("uart", filt, intr, arg,
PIC_UART_0_IRQ, flags, cookiep);
pic_setup_intr(PIC_IRT_UART_0_INDEX, PIC_UART_0_IRQ, 0x1, 1);
} else if (strcmp(name, "nlge") == 0) {
int irq;
/* This is a hack to pass in the irq */
irq = (intptr_t)ires->__r_i;
cpu_establish_hardintr("nlge", filt, intr, arg, irq, flags,
cookiep);
pic_setup_intr(irq - PIC_IRQ_BASE, irq, 0x1, 1);
} else if (strcmp(name, "ehci") == 0) {
cpu_establish_hardintr("ehci", filt, intr, arg, PIC_USB_IRQ, flags,
cookiep);
pic_setup_intr(PIC_USB_IRQ - PIC_IRQ_BASE, PIC_USB_IRQ, 0x1, 1);
} else if (strcmp(name, "ata") == 0) {
xlr_establish_intr("ata", filt, intr, arg, PIC_PCMCIA_IRQ, flags,
cookiep, bridge_pcmcia_ack);
pic_setup_intr(PIC_PCMCIA_IRQ - PIC_IRQ_BASE, PIC_PCMCIA_IRQ, 0x1, 1);
}
return (0);
}
static struct resource *
iodi_alloc_resource(device_t bus, device_t child, int type, int *rid,
rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
{
struct resource *res = malloc(sizeof(*res), M_DEVBUF, M_WAITOK);
const char *name = device_get_name(child);
int unit;
#ifdef DEBUG
switch (type) {
case SYS_RES_IRQ:
device_printf(bus, "IRQ resource - for %s %jx-%jx\n",
device_get_nameunit(child), start, end);
break;
case SYS_RES_IOPORT:
device_printf(bus, "IOPORT resource - for %s %jx-%jx\n",
device_get_nameunit(child), start, end);
break;
case SYS_RES_MEMORY:
device_printf(bus, "MEMORY resource - for %s %jx-%jx\n",
device_get_nameunit(child), start, end);
break;
}
#endif
if (strcmp(name, "uart") == 0) {
if ((unit = device_get_unit(child)) == 0) { /* uart 0 */
res->r_bushandle = (xlr_io_base + XLR_IO_UART_0_OFFSET);
} else if (unit == 1) {
res->r_bushandle = (xlr_io_base + XLR_IO_UART_1_OFFSET);
} else
printf("%s: Unknown uart unit\n", __FUNCTION__);
res->r_bustag = uart_bus_space_mem;
} else if (strcmp(name, "ehci") == 0) {
res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1ef24000);
res->r_bustag = rmi_pci_bus_space;
} else if (strcmp(name, "cfi") == 0) {
res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1c000000);
res->r_bustag = 0;
} else if (strcmp(name, "ata") == 0) {
res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1d000000);
res->r_bustag = rmi_pci_bus_space; /* byte swapping (not really PCI) */
}
/* res->r_start = *rid; */
return (res);
}
static int
iodi_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
return (0);
}
/* prototypes */
static int iodi_probe(device_t);
static int iodi_attach(device_t);
static int iodi_detach(device_t);
static void iodi_identify(driver_t *, device_t);
int
iodi_probe(device_t dev)
{
return (BUS_PROBE_NOWILDCARD);
}
void
iodi_identify(driver_t * driver, device_t parent)
{
BUS_ADD_CHILD(parent, 0, "iodi", 0);
}
int
iodi_attach(device_t dev)
{
device_t tmpd;
int i;
/*
* Attach each devices
*/
device_add_child(dev, "uart", 0);
device_add_child(dev, "xlr_i2c", 0);
device_add_child(dev, "xlr_i2c", 1);
device_add_child(dev, "pcib", 0);
device_add_child(dev, "rmisec", -1);
if (xlr_board_info.usb)
device_add_child(dev, "ehci", 0);
if (xlr_board_info.cfi)
device_add_child(dev, "cfi", 0);
if (xlr_board_info.ata)
device_add_child(dev, "ata", 0);
for (i = 0; i < 3; i++) {
if (xlr_board_info.gmac_block[i].enabled == 0)
continue;
tmpd = device_add_child(dev, "nlna", i);
device_set_ivars(tmpd, &xlr_board_info.gmac_block[i]);
}
bus_generic_probe(dev);
bus_generic_attach(dev);
return 0;
}
int
iodi_detach(device_t dev)
{
device_t nlna_dev;
int error, i, ret;
error = 0;
ret = 0;
for (i = 0; i < 3; i++) {
nlna_dev = device_find_child(dev, "nlna", i);
if (nlna_dev != NULL)
error = bus_generic_detach(nlna_dev);
if (error)
ret = error;
}
return ret;
}
static device_method_t iodi_methods[] = {
DEVMETHOD(device_probe, iodi_probe),
DEVMETHOD(device_attach, iodi_attach),
DEVMETHOD(device_detach, iodi_detach),
DEVMETHOD(device_identify, iodi_identify),
DEVMETHOD(bus_alloc_resource, iodi_alloc_resource),
DEVMETHOD(bus_activate_resource, iodi_activate_resource),
DEVMETHOD(bus_add_child, bus_generic_add_child),
DEVMETHOD(bus_setup_intr, iodi_setup_intr),
{0, 0},
};
static driver_t iodi_driver = {
"iodi",
iodi_methods,
1 /* no softc */
};
static devclass_t iodi_devclass;
DRIVER_MODULE(iodi, nexus, iodi_driver, iodi_devclass, 0, 0);