745 lines
25 KiB
C
745 lines
25 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause
|
|
*
|
|
* Copyright (c) 2006 M. Warner Losh <imp@FreeBSD.org>
|
|
* Copyright (c) 2017 Marius Strobl <marius@FreeBSD.org>
|
|
* Copyright (c) 2015-2016 Ilya Bakulin <kibab@FreeBSD.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* Portions of this software may have been developed with reference to
|
|
* the SD Simplified Specification. The following disclaimer may apply:
|
|
*
|
|
* The following conditions apply to the release of the simplified
|
|
* specification ("Simplified Specification") by the SD Card Association and
|
|
* the SD Group. The Simplified Specification is a subset of the complete SD
|
|
* Specification which is owned by the SD Card Association and the SD
|
|
* Group. This Simplified Specification is provided on a non-confidential
|
|
* basis subject to the disclaimers below. Any implementation of the
|
|
* Simplified Specification may require a license from the SD Card
|
|
* Association, SD Group, SD-3C LLC or other third parties.
|
|
*
|
|
* Disclaimers:
|
|
*
|
|
* The information contained in the Simplified Specification is presented only
|
|
* as a standard specification for SD Cards and SD Host/Ancillary products and
|
|
* is provided "AS-IS" without any representations or warranties of any
|
|
* kind. No responsibility is assumed by the SD Group, SD-3C LLC or the SD
|
|
* Card Association for any damages, any infringements of patents or other
|
|
* right of the SD Group, SD-3C LLC, the SD Card Association or any third
|
|
* parties, which may result from its use. No license is granted by
|
|
* implication, estoppel or otherwise under any patent or other rights of the
|
|
* SD Group, SD-3C LLC, the SD Card Association or any third party. Nothing
|
|
* herein shall be construed as an obligation by the SD Group, the SD-3C LLC
|
|
* or the SD Card Association to disclose or distribute any technical
|
|
* information, know-how or other confidential information to any third party.
|
|
*/
|
|
|
|
#ifndef DEV_MMC_MMCREG_H
|
|
#define DEV_MMC_MMCREG_H
|
|
|
|
/*
|
|
* This file contains the register definitions for the mmc and sd buses.
|
|
* They are taken from publicly available sources.
|
|
*/
|
|
|
|
struct mmc_data;
|
|
struct mmc_request;
|
|
|
|
struct mmc_command {
|
|
uint32_t opcode;
|
|
uint32_t arg;
|
|
uint32_t resp[4];
|
|
uint32_t flags; /* Expected responses */
|
|
#define MMC_RSP_PRESENT (1ul << 0) /* Response */
|
|
#define MMC_RSP_136 (1ul << 1) /* 136 bit response */
|
|
#define MMC_RSP_CRC (1ul << 2) /* Expect valid crc */
|
|
#define MMC_RSP_BUSY (1ul << 3) /* Card may send busy */
|
|
#define MMC_RSP_OPCODE (1ul << 4) /* Response include opcode */
|
|
#define MMC_RSP_MASK 0x1ful
|
|
#define MMC_CMD_AC (0ul << 5) /* Addressed Command, no data */
|
|
#define MMC_CMD_ADTC (1ul << 5) /* Addressed Data transfer cmd */
|
|
#define MMC_CMD_BC (2ul << 5) /* Broadcast command, no response */
|
|
#define MMC_CMD_BCR (3ul << 5) /* Broadcast command with response */
|
|
#define MMC_CMD_MASK (3ul << 5)
|
|
|
|
/* Possible response types defined in the standard: */
|
|
#define MMC_RSP_NONE (0)
|
|
#define MMC_RSP_R1 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE)
|
|
#define MMC_RSP_R1B (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE | MMC_RSP_BUSY)
|
|
#define MMC_RSP_R2 (MMC_RSP_PRESENT | MMC_RSP_136 | MMC_RSP_CRC)
|
|
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
|
|
#define MMC_RSP_R4 (MMC_RSP_PRESENT)
|
|
#define MMC_RSP_R5 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE)
|
|
#define MMC_RSP_R5B (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE | MMC_RSP_BUSY)
|
|
#define MMC_RSP_R6 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE)
|
|
#define MMC_RSP_R7 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE)
|
|
#define MMC_RSP(x) ((x) & MMC_RSP_MASK)
|
|
uint32_t retries;
|
|
uint32_t error;
|
|
#define MMC_ERR_NONE 0
|
|
#define MMC_ERR_TIMEOUT 1
|
|
#define MMC_ERR_BADCRC 2
|
|
#define MMC_ERR_FIFO 3
|
|
#define MMC_ERR_FAILED 4
|
|
#define MMC_ERR_INVALID 5
|
|
#define MMC_ERR_NO_MEMORY 6
|
|
#define MMC_ERR_MAX 6
|
|
struct mmc_data *data; /* Data segment with cmd */
|
|
struct mmc_request *mrq; /* backpointer to request */
|
|
};
|
|
|
|
/*
|
|
* R1 responses
|
|
*
|
|
* Types (per SD 2.0 standard)
|
|
* e : error bit
|
|
* s : status bit
|
|
* r : detected and set for the actual command response
|
|
* x : Detected and set during command execution. The host can get
|
|
* the status by issuing a command with R1 response.
|
|
*
|
|
* Clear Condition (per SD 2.0 standard)
|
|
* a : according to the card current state.
|
|
* b : always related to the previous command. reception of a valid
|
|
* command will clear it (with a delay of one command).
|
|
* c : clear by read
|
|
*/
|
|
#define R1_OUT_OF_RANGE (1u << 31) /* erx, c */
|
|
#define R1_ADDRESS_ERROR (1u << 30) /* erx, c */
|
|
#define R1_BLOCK_LEN_ERROR (1u << 29) /* erx, c */
|
|
#define R1_ERASE_SEQ_ERROR (1u << 28) /* er, c */
|
|
#define R1_ERASE_PARAM (1u << 27) /* erx, c */
|
|
#define R1_WP_VIOLATION (1u << 26) /* erx, c */
|
|
#define R1_CARD_IS_LOCKED (1u << 25) /* sx, a */
|
|
#define R1_LOCK_UNLOCK_FAILED (1u << 24) /* erx, c */
|
|
#define R1_COM_CRC_ERROR (1u << 23) /* er, b */
|
|
#define R1_ILLEGAL_COMMAND (1u << 22) /* er, b */
|
|
#define R1_CARD_ECC_FAILED (1u << 21) /* erx, c */
|
|
#define R1_CC_ERROR (1u << 20) /* erx, c */
|
|
#define R1_ERROR (1u << 19) /* erx, c */
|
|
#define R1_CSD_OVERWRITE (1u << 16) /* erx, c */
|
|
#define R1_WP_ERASE_SKIP (1u << 15) /* erx, c */
|
|
#define R1_CARD_ECC_DISABLED (1u << 14) /* sx, a */
|
|
#define R1_ERASE_RESET (1u << 13) /* sr, c */
|
|
#define R1_CURRENT_STATE_MASK (0xfu << 9) /* sx, b */
|
|
#define R1_READY_FOR_DATA (1u << 8) /* sx, a */
|
|
#define R1_SWITCH_ERROR (1u << 7) /* sx, c */
|
|
#define R1_APP_CMD (1u << 5) /* sr, c */
|
|
#define R1_AKE_SEQ_ERROR (1u << 3) /* er, c */
|
|
#define R1_STATUS(x) ((x) & 0xFFFFE000)
|
|
#define R1_CURRENT_STATE(x) (((x) & R1_CURRENT_STATE_MASK) >> 9)
|
|
#define R1_STATE_IDLE 0
|
|
#define R1_STATE_READY 1
|
|
#define R1_STATE_IDENT 2
|
|
#define R1_STATE_STBY 3
|
|
#define R1_STATE_TRAN 4
|
|
#define R1_STATE_DATA 5
|
|
#define R1_STATE_RCV 6
|
|
#define R1_STATE_PRG 7
|
|
#define R1_STATE_DIS 8
|
|
|
|
/* R4 responses (SDIO) */
|
|
#define R4_IO_NUM_FUNCTIONS(ocr) (((ocr) >> 28) & 0x3)
|
|
#define R4_IO_MEM_PRESENT (0x1 << 27)
|
|
#define R4_IO_OCR_MASK 0x00fffff0
|
|
|
|
/*
|
|
* R5 responses
|
|
*
|
|
* Types (per SD 2.0 standard)
|
|
* e : error bit
|
|
* s : status bit
|
|
* r : detected and set for the actual command response
|
|
* x : Detected and set during command execution. The host can get
|
|
* the status by issuing a command with R1 response.
|
|
*
|
|
* Clear Condition (per SD 2.0 standard)
|
|
* a : according to the card current state.
|
|
* b : always related to the previous command. reception of a valid
|
|
* command will clear it (with a delay of one command).
|
|
* c : clear by read
|
|
*/
|
|
#define R5_COM_CRC_ERROR (1u << 15) /* er, b */
|
|
#define R5_ILLEGAL_COMMAND (1u << 14) /* er, b */
|
|
#define R5_IO_CURRENT_STATE_MASK (3u << 12) /* s, b */
|
|
#define R5_IO_CURRENT_STATE(x) (((x) & R5_IO_CURRENT_STATE_MASK) >> 12)
|
|
#define R5_ERROR (1u << 11) /* erx, c */
|
|
#define R5_FUNCTION_NUMBER (1u << 9) /* er, c */
|
|
#define R5_OUT_OF_RANGE (1u << 8) /* er, c */
|
|
|
|
struct mmc_data {
|
|
size_t len; /* size of the data */
|
|
size_t xfer_len;
|
|
void *data; /* data buffer */
|
|
uint32_t flags;
|
|
#define MMC_DATA_WRITE (1UL << 0)
|
|
#define MMC_DATA_READ (1UL << 1)
|
|
#define MMC_DATA_STREAM (1UL << 2)
|
|
#define MMC_DATA_MULTI (1UL << 3)
|
|
#define MMC_DATA_BLOCK_SIZE (1UL << 4)
|
|
struct mmc_request *mrq;
|
|
size_t block_size; /* block size for CMD53 */
|
|
size_t block_count; /* block count for CMD53 */
|
|
};
|
|
|
|
struct mmc_request {
|
|
struct mmc_command *cmd;
|
|
struct mmc_command *stop;
|
|
void (*done)(struct mmc_request *); /* Completion function */
|
|
void *done_data; /* requestor set data */
|
|
uint32_t flags;
|
|
#define MMC_REQ_DONE 1
|
|
#define MMC_TUNE_DONE 2
|
|
};
|
|
|
|
/* Command definitions */
|
|
|
|
/* Class 0 and 1: Basic commands & read stream commands */
|
|
#define MMC_GO_IDLE_STATE 0
|
|
#define MMC_SEND_OP_COND 1
|
|
#define MMC_ALL_SEND_CID 2
|
|
#define MMC_SET_RELATIVE_ADDR 3
|
|
#define SD_SEND_RELATIVE_ADDR 3
|
|
#define MMC_SET_DSR 4
|
|
#define MMC_SLEEP_AWAKE 5
|
|
#define IO_SEND_OP_COND 5
|
|
#define MMC_SWITCH_FUNC 6
|
|
#define MMC_SWITCH_FUNC_CMDS 0
|
|
#define MMC_SWITCH_FUNC_SET 1
|
|
#define MMC_SWITCH_FUNC_CLR 2
|
|
#define MMC_SWITCH_FUNC_WR 3
|
|
#define MMC_SELECT_CARD 7
|
|
#define MMC_DESELECT_CARD 7
|
|
#define MMC_SEND_EXT_CSD 8
|
|
#define SD_SEND_IF_COND 8
|
|
#define MMC_SEND_CSD 9
|
|
#define MMC_SEND_CID 10
|
|
#define MMC_READ_DAT_UNTIL_STOP 11
|
|
#define MMC_STOP_TRANSMISSION 12
|
|
#define MMC_SEND_STATUS 13
|
|
#define MMC_BUSTEST_R 14
|
|
#define MMC_GO_INACTIVE_STATE 15
|
|
#define MMC_BUSTEST_W 19
|
|
|
|
/* Class 2: Block oriented read commands */
|
|
#define MMC_SET_BLOCKLEN 16
|
|
#define MMC_READ_SINGLE_BLOCK 17
|
|
#define MMC_READ_MULTIPLE_BLOCK 18
|
|
#define MMC_SEND_TUNING_BLOCK 19
|
|
#define MMC_SEND_TUNING_BLOCK_HS200 21
|
|
|
|
/* Class 3: Stream write commands */
|
|
#define MMC_WRITE_DAT_UNTIL_STOP 20
|
|
/* reserved: 22 */
|
|
|
|
/* Class 4: Block oriented write commands */
|
|
#define MMC_SET_BLOCK_COUNT 23
|
|
#define MMC_WRITE_BLOCK 24
|
|
#define MMC_WRITE_MULTIPLE_BLOCK 25
|
|
#define MMC_PROGARM_CID 26
|
|
#define MMC_PROGRAM_CSD 27
|
|
|
|
/* Class 6: Block oriented write protection commands */
|
|
#define MMC_SET_WRITE_PROT 28
|
|
#define MMC_CLR_WRITE_PROT 29
|
|
#define MMC_SEND_WRITE_PROT 30
|
|
/* reserved: 31 */
|
|
|
|
/* Class 5: Erase commands */
|
|
#define SD_ERASE_WR_BLK_START 32
|
|
#define SD_ERASE_WR_BLK_END 33
|
|
/* 34 -- reserved old command */
|
|
#define MMC_ERASE_GROUP_START 35
|
|
#define MMC_ERASE_GROUP_END 36
|
|
/* 37 -- reserved old command */
|
|
#define MMC_ERASE 38
|
|
#define MMC_ERASE_ERASE 0x00000000
|
|
#define MMC_ERASE_TRIM 0x00000001
|
|
#define MMC_ERASE_FULE 0x00000002
|
|
#define MMC_ERASE_DISCARD 0x00000003
|
|
#define MMC_ERASE_SECURE_ERASE 0x80000000
|
|
#define MMC_ERASE_SECURE_TRIM1 0x80000001
|
|
#define MMC_ERASE_SECURE_TRIM2 0x80008000
|
|
|
|
/* Class 9: I/O mode commands */
|
|
#define MMC_FAST_IO 39
|
|
#define MMC_GO_IRQ_STATE 40
|
|
/* reserved: 41 */
|
|
|
|
/* Class 7: Lock card */
|
|
#define MMC_LOCK_UNLOCK 42
|
|
/* reserved: 43 */
|
|
/* reserved: 44 */
|
|
/* reserved: 45 */
|
|
/* reserved: 46 */
|
|
/* reserved: 47 */
|
|
/* reserved: 48 */
|
|
/* reserved: 49 */
|
|
/* reserved: 50 */
|
|
/* reserved: 51 */
|
|
/* reserved: 54 */
|
|
|
|
/* Class 8: Application specific commands */
|
|
#define MMC_APP_CMD 55
|
|
#define MMC_GEN_CMD 56
|
|
/* reserved: 57 */
|
|
/* reserved: 58 */
|
|
/* reserved: 59 */
|
|
/* reserved for mfg: 60 */
|
|
/* reserved for mfg: 61 */
|
|
/* reserved for mfg: 62 */
|
|
/* reserved for mfg: 63 */
|
|
|
|
/* Class 9: I/O cards (sd) */
|
|
#define SD_IO_RW_DIRECT 52
|
|
/* CMD52 arguments */
|
|
#define SD_ARG_CMD52_READ (0 << 31)
|
|
#define SD_ARG_CMD52_WRITE (1 << 31)
|
|
#define SD_ARG_CMD52_FUNC_SHIFT 28
|
|
#define SD_ARG_CMD52_FUNC_MASK 0x7
|
|
#define SD_ARG_CMD52_EXCHANGE (1 << 27)
|
|
#define SD_ARG_CMD52_REG_SHIFT 9
|
|
#define SD_ARG_CMD52_REG_MASK 0x1ffff
|
|
#define SD_ARG_CMD52_DATA_SHIFT 0
|
|
#define SD_ARG_CMD52_DATA_MASK 0xff
|
|
#define SD_R5_DATA(resp) ((resp)[0] & 0xff)
|
|
|
|
#define SD_IO_RW_EXTENDED 53
|
|
/* CMD53 arguments */
|
|
#define SD_ARG_CMD53_READ (0 << 31)
|
|
#define SD_ARG_CMD53_WRITE (1 << 31)
|
|
#define SD_ARG_CMD53_FUNC_SHIFT 28
|
|
#define SD_ARG_CMD53_FUNC_MASK 0x7
|
|
#define SD_ARG_CMD53_BLOCK_MODE (1 << 27)
|
|
#define SD_ARG_CMD53_INCREMENT (1 << 26)
|
|
#define SD_ARG_CMD53_REG_SHIFT 9
|
|
#define SD_ARG_CMD53_REG_MASK 0x1ffff
|
|
#define SD_ARG_CMD53_LENGTH_SHIFT 0
|
|
#define SD_ARG_CMD53_LENGTH_MASK 0x1ff
|
|
#define SD_ARG_CMD53_LENGTH_MAX 64 /* XXX should be 511? */
|
|
|
|
/* Class 10: Switch function commands */
|
|
#define SD_SWITCH_FUNC 6
|
|
/* reserved: 34 */
|
|
/* reserved: 35 */
|
|
/* reserved: 36 */
|
|
/* reserved: 37 */
|
|
/* reserved: 50 */
|
|
/* reserved: 57 */
|
|
|
|
/* Application specific commands for SD */
|
|
#define ACMD_SET_BUS_WIDTH 6
|
|
#define ACMD_SD_STATUS 13
|
|
#define ACMD_SEND_NUM_WR_BLOCKS 22
|
|
#define ACMD_SET_WR_BLK_ERASE_COUNT 23
|
|
#define ACMD_SD_SEND_OP_COND 41
|
|
#define ACMD_SET_CLR_CARD_DETECT 42
|
|
#define ACMD_SEND_SCR 51
|
|
|
|
/*
|
|
* EXT_CSD fields
|
|
*/
|
|
#define EXT_CSD_FLUSH_CACHE 32 /* W/E */
|
|
#define EXT_CSD_CACHE_CTRL 33 /* R/W/E */
|
|
#define EXT_CSD_EXT_PART_ATTR 52 /* R/W, 2 bytes */
|
|
#define EXT_CSD_ENH_START_ADDR 136 /* R/W, 4 bytes */
|
|
#define EXT_CSD_ENH_SIZE_MULT 140 /* R/W, 3 bytes */
|
|
#define EXT_CSD_GP_SIZE_MULT 143 /* R/W, 12 bytes */
|
|
#define EXT_CSD_PART_SET 155 /* R/W */
|
|
#define EXT_CSD_PART_ATTR 156 /* R/W */
|
|
#define EXT_CSD_PART_SUPPORT 160 /* RO */
|
|
#define EXT_CSD_RPMB_MULT 168 /* RO */
|
|
#define EXT_CSD_BOOT_WP_STATUS 174 /* RO */
|
|
#define EXT_CSD_ERASE_GRP_DEF 175 /* R/W */
|
|
#define EXT_CSD_PART_CONFIG 179 /* R/W */
|
|
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
|
|
#define EXT_CSD_STROBE_SUPPORT 184 /* RO */
|
|
#define EXT_CSD_HS_TIMING 185 /* R/W */
|
|
#define EXT_CSD_POWER_CLASS 187 /* R/W */
|
|
#define EXT_CSD_CARD_TYPE 196 /* RO */
|
|
#define EXT_CSD_DRIVER_STRENGTH 197 /* RO */
|
|
#define EXT_CSD_REV 192 /* RO */
|
|
#define EXT_CSD_PART_SWITCH_TO 199 /* RO */
|
|
#define EXT_CSD_PWR_CL_52_195 200 /* RO */
|
|
#define EXT_CSD_PWR_CL_26_195 201 /* RO */
|
|
#define EXT_CSD_PWR_CL_52_360 202 /* RO */
|
|
#define EXT_CSD_PWR_CL_26_360 203 /* RO */
|
|
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
|
|
#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
|
|
#define EXT_CSD_ERASE_TO_MULT 223 /* RO */
|
|
#define EXT_CSD_ERASE_GRP_SIZE 224 /* RO */
|
|
#define EXT_CSD_BOOT_SIZE_MULT 226 /* RO */
|
|
#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
|
|
#define EXT_CSD_PWR_CL_200_195 236 /* RO */
|
|
#define EXT_CSD_PWR_CL_200_360 237 /* RO */
|
|
#define EXT_CSD_PWR_CL_52_195_DDR 238 /* RO */
|
|
#define EXT_CSD_PWR_CL_52_360_DDR 239 /* RO */
|
|
#define EXT_CSD_CACHE_FLUSH_POLICY 249 /* RO */
|
|
#define EXT_CSD_GEN_CMD6_TIME 248 /* RO */
|
|
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
|
|
#define EXT_CSD_PWR_CL_200_360_DDR 253 /* RO */
|
|
|
|
/*
|
|
* EXT_CSD field definitions
|
|
*/
|
|
#define EXT_CSD_FLUSH_CACHE_FLUSH 0x01
|
|
#define EXT_CSD_FLUSH_CACHE_BARRIER 0x02
|
|
|
|
#define EXT_CSD_CACHE_CTRL_CACHE_EN 0x01
|
|
|
|
#define EXT_CSD_EXT_PART_ATTR_DEFAULT 0x0
|
|
#define EXT_CSD_EXT_PART_ATTR_SYSTEMCODE 0x1
|
|
#define EXT_CSD_EXT_PART_ATTR_NPERSISTENT 0x2
|
|
|
|
#define EXT_CSD_PART_SET_COMPLETED 0x01
|
|
|
|
#define EXT_CSD_PART_ATTR_ENH_USR 0x01
|
|
#define EXT_CSD_PART_ATTR_ENH_GP0 0x02
|
|
#define EXT_CSD_PART_ATTR_ENH_GP1 0x04
|
|
#define EXT_CSD_PART_ATTR_ENH_GP2 0x08
|
|
#define EXT_CSD_PART_ATTR_ENH_GP3 0x10
|
|
#define EXT_CSD_PART_ATTR_ENH_MASK 0x1f
|
|
|
|
#define EXT_CSD_PART_SUPPORT_EN 0x01
|
|
#define EXT_CSD_PART_SUPPORT_ENH_ATTR_EN 0x02
|
|
#define EXT_CSD_PART_SUPPORT_EXT_ATTR_EN 0x04
|
|
|
|
#define EXT_CSD_BOOT_WP_STATUS_BOOT0_PWR 0x01
|
|
#define EXT_CSD_BOOT_WP_STATUS_BOOT0_PERM 0x02
|
|
#define EXT_CSD_BOOT_WP_STATUS_BOOT0_MASK 0x03
|
|
#define EXT_CSD_BOOT_WP_STATUS_BOOT1_PWR 0x04
|
|
#define EXT_CSD_BOOT_WP_STATUS_BOOT1_PERM 0x08
|
|
#define EXT_CSD_BOOT_WP_STATUS_BOOT1_MASK 0x0c
|
|
|
|
#define EXT_CSD_ERASE_GRP_DEF_EN 0x01
|
|
|
|
#define EXT_CSD_PART_CONFIG_ACC_DEFAULT 0x00
|
|
#define EXT_CSD_PART_CONFIG_ACC_BOOT0 0x01
|
|
#define EXT_CSD_PART_CONFIG_ACC_BOOT1 0x02
|
|
#define EXT_CSD_PART_CONFIG_ACC_RPMB 0x03
|
|
#define EXT_CSD_PART_CONFIG_ACC_GP0 0x04
|
|
#define EXT_CSD_PART_CONFIG_ACC_GP1 0x05
|
|
#define EXT_CSD_PART_CONFIG_ACC_GP2 0x06
|
|
#define EXT_CSD_PART_CONFIG_ACC_GP3 0x07
|
|
#define EXT_CSD_PART_CONFIG_ACC_MASK 0x07
|
|
#define EXT_CSD_PART_CONFIG_BOOT0 0x08
|
|
#define EXT_CSD_PART_CONFIG_BOOT1 0x10
|
|
#define EXT_CSD_PART_CONFIG_BOOT_USR 0x38
|
|
#define EXT_CSD_PART_CONFIG_BOOT_MASK 0x38
|
|
#define EXT_CSD_PART_CONFIG_BOOT_ACK 0x40
|
|
|
|
#define EXT_CSD_CMD_SET_NORMAL 1
|
|
#define EXT_CSD_CMD_SET_SECURE 2
|
|
#define EXT_CSD_CMD_SET_CPSECURE 4
|
|
|
|
#define EXT_CSD_HS_TIMING_BC 0
|
|
#define EXT_CSD_HS_TIMING_HS 1
|
|
#define EXT_CSD_HS_TIMING_HS200 2
|
|
#define EXT_CSD_HS_TIMING_HS400 3
|
|
#define EXT_CSD_HS_TIMING_DRV_STR_SHIFT 4
|
|
|
|
#define EXT_CSD_POWER_CLASS_8BIT_MASK 0xf0
|
|
#define EXT_CSD_POWER_CLASS_8BIT_SHIFT 4
|
|
#define EXT_CSD_POWER_CLASS_4BIT_MASK 0x0f
|
|
#define EXT_CSD_POWER_CLASS_4BIT_SHIFT 0
|
|
|
|
#define EXT_CSD_CARD_TYPE_HS_26 0x0001
|
|
#define EXT_CSD_CARD_TYPE_HS_52 0x0002
|
|
#define EXT_CSD_CARD_TYPE_DDR_52_1_8V 0x0004
|
|
#define EXT_CSD_CARD_TYPE_DDR_52_1_2V 0x0008
|
|
#define EXT_CSD_CARD_TYPE_HS200_1_8V 0x0010
|
|
#define EXT_CSD_CARD_TYPE_HS200_1_2V 0x0020
|
|
#define EXT_CSD_CARD_TYPE_HS400_1_8V 0x0040
|
|
#define EXT_CSD_CARD_TYPE_HS400_1_2V 0x0080
|
|
|
|
#define EXT_CSD_BUS_WIDTH_1 0
|
|
#define EXT_CSD_BUS_WIDTH_4 1
|
|
#define EXT_CSD_BUS_WIDTH_8 2
|
|
#define EXT_CSD_BUS_WIDTH_4_DDR 5
|
|
#define EXT_CSD_BUS_WIDTH_8_DDR 6
|
|
#define EXT_CSD_BUS_WIDTH_ES 0x80
|
|
|
|
#define EXT_CSD_STROBE_SUPPORT_EN 0x01
|
|
|
|
#define EXT_CSD_SEC_FEATURE_SUPPORT_ER_EN 0x01
|
|
#define EXT_CSD_SEC_FEATURE_SUPPORT_BD_BLK_EN 0x04
|
|
#define EXT_CSD_SEC_FEATURE_SUPPORT_GB_CL_EN 0x10
|
|
#define EXT_CSD_SEC_FEATURE_SUPPORT_SANITIZE 0x40
|
|
|
|
#define EXT_CSD_CACHE_FLUSH_POLICY_FIFO 0x01
|
|
|
|
/*
|
|
* Vendor specific EXT_CSD fields
|
|
*/
|
|
/* SanDisk iNAND */
|
|
#define EXT_CSD_INAND_CMD38 113
|
|
#define EXT_CSD_INAND_CMD38_ERASE 0x00
|
|
#define EXT_CSD_INAND_CMD38_TRIM 0x01
|
|
#define EXT_CSD_INAND_CMD38_SECURE_ERASE 0x80
|
|
#define EXT_CSD_INAND_CMD38_SECURE_TRIM1 0x81
|
|
#define EXT_CSD_INAND_CMD38_SECURE_TRIM2 0x82
|
|
|
|
#define MMC_TYPE_HS_26_MAX 26000000
|
|
#define MMC_TYPE_HS_52_MAX 52000000
|
|
#define MMC_TYPE_DDR52_MAX 52000000
|
|
#define MMC_TYPE_HS200_HS400ES_MAX 200000000
|
|
|
|
/*
|
|
* SD bus widths
|
|
*/
|
|
#define SD_BUS_WIDTH_1 0
|
|
#define SD_BUS_WIDTH_4 2
|
|
|
|
/*
|
|
* SD Switch
|
|
*/
|
|
#define SD_SWITCH_MODE_CHECK 0
|
|
#define SD_SWITCH_MODE_SET 1
|
|
#define SD_SWITCH_GROUP1 0
|
|
#define SD_SWITCH_NORMAL_MODE 0
|
|
#define SD_SWITCH_HS_MODE 1
|
|
#define SD_SWITCH_SDR50_MODE 2
|
|
#define SD_SWITCH_SDR104_MODE 3
|
|
#define SD_SWITCH_DDR50 4
|
|
#define SD_SWITCH_NOCHANGE 0xF
|
|
|
|
#define SD_CLR_CARD_DETECT 0
|
|
#define SD_SET_CARD_DETECT 1
|
|
|
|
#define SD_HS_MAX 50000000
|
|
#define SD_DDR50_MAX 50000000
|
|
#define SD_SDR12_MAX 25000000
|
|
#define SD_SDR25_MAX 50000000
|
|
#define SD_SDR50_MAX 100000000
|
|
#define SD_SDR104_MAX 208000000
|
|
|
|
/* Specifications require 400 kHz max. during ID phase. */
|
|
#define SD_MMC_CARD_ID_FREQUENCY 400000
|
|
|
|
/*
|
|
* SDIO Direct & Extended I/O
|
|
*/
|
|
#define SD_IO_RW_WR (1u << 31)
|
|
#define SD_IO_RW_FUNC(x) (((x) & 0x7) << 28)
|
|
#define SD_IO_RW_RAW (1u << 27)
|
|
#define SD_IO_RW_INCR (1u << 26)
|
|
#define SD_IO_RW_ADR(x) (((x) & 0x1FFFF) << 9)
|
|
#define SD_IO_RW_DAT(x) (((x) & 0xFF) << 0)
|
|
#define SD_IO_RW_LEN(x) (((x) & 0xFF) << 0)
|
|
|
|
#define SD_IOE_RW_LEN(x) (((x) & 0x1FF) << 0)
|
|
#define SD_IOE_RW_ADR(x) (((x) & 0x1FFFF) << 9)
|
|
#define SD_IOE_RW_INCR (1u << 26)
|
|
#define SD_IOE_RW_BLK (1u << 27)
|
|
#define SD_IOE_RW_FUNC(x) (((x) & 0x7) << 28)
|
|
#define SD_IOE_RW_WR (1u << 31)
|
|
|
|
/* Card Common Control Registers (CCCR) */
|
|
#define SD_IO_CCCR_START 0x00000 /* Offset in F0 address space */
|
|
#define SD_IO_CCCR_SIZE 0x100 /* Total size of CCCR */
|
|
#define SD_IO_CCCR_FN_ENABLE 0x02 /* Enabled functions */
|
|
#define SD_IO_CCCR_FN_READY 0x03 /* Function ready status */
|
|
#define SD_IO_CCCR_INT_ENABLE 0x04 /* Per-function interrupt enable */
|
|
#define SD_IO_CCCR_INT_PENDING 0x05 /* Per-function interrupt pending */
|
|
#define SD_IO_CCCR_CTL 0x06 /* I/O Abort register */
|
|
#define CCCR_CTL_RES (1 << 3) /* Perform SDIO reset */
|
|
#define SD_IO_CCCR_BUS_WIDTH 0x07 /* Bus Width register */
|
|
#define CCCR_BUS_WIDTH_4 (1 << 1)
|
|
#define CCCR_BUS_WIDTH_1 (1 << 0)
|
|
#define SD_IO_CCCR_CARDCAP 0x08 /* SDIO card capabilities */
|
|
#define CCCR_CC_SMB (1 << 1) /* CMD53 block mode support */
|
|
#define CCCR_CC_LSC (1 << 6)
|
|
|
|
#define SD_IO_CCCR_CISPTR 0x09 /* 0x09 - 0x0B */
|
|
#define SD_IO_CCCR_FN0_BLKSZ 0x10 /* 0x10 - 0x11 */
|
|
#define SD_IO_CCCR_SPEED 0x13
|
|
#define CCCR_SPEED_SHS (1 << 0)
|
|
#define CCCR_SPEED_BSS_MASK (0x7 << 1)
|
|
#define CCCR_SPEED_EHS (1 << 1)
|
|
#define CCCR_SPEED_SDR12 (0 << 1)
|
|
#define CCCR_SPEED_SDR25 (1 << 1)
|
|
#define CCCR_SPEED_SDR50 (2 << 1)
|
|
#define CCCR_SPEED_SDR104 (3 << 1)
|
|
#define CCCR_SPEED_DDR50 (4 << 1)
|
|
|
|
/* Function Basic Registers (FBR) */
|
|
#define SD_IO_FBR_START 0x00100 /* Offset in F0 address space */
|
|
#define SD_IO_FBR_SIZE 0x00700 /* Total size of FBR */
|
|
#define SD_IO_FBR_F_SIZE 0x00100 /* Size of each function */
|
|
#define SD_IO_FBR_START_F(n) (SD_IO_FBR_START + (n-1) * SD_IO_FBR_F_SIZE)
|
|
#define SD_IO_FBR_CIS_OFFSET 0x9 /* Offset of this function's info block within CIS area */
|
|
#define SD_IO_FBR_IOBLKSZ 0x10 /* Block size for CMD53 block mode operations */
|
|
|
|
/* Card Information Structure (CIS) */
|
|
#define SD_IO_CIS_START 0x01000 /* Offset in F0 address space */
|
|
#define SD_IO_CIS_SIZE 0x17000 /* Total size of CIS */
|
|
|
|
/* CIS tuple codes (based on PC Card 16) */
|
|
#define SD_IO_CISTPL_VERS_1 0x15
|
|
#define SD_IO_CISTPL_MANFID 0x20
|
|
#define SD_IO_CISTPL_FUNCID 0x21
|
|
#define SD_IO_CISTPL_FUNCE 0x22
|
|
#define SD_IO_CISTPL_END 0xff
|
|
|
|
/* CISTPL_FUNCID codes */
|
|
/* OpenBSD incorrectly defines 0x0c as FUNCTION_WLAN */
|
|
/* #define SDMMC_FUNCTION_WLAN 0x0c */
|
|
|
|
/* OCR bits */
|
|
|
|
/*
|
|
* in SD 2.0 spec, bits 8-14 are now marked reserved
|
|
* Low voltage in SD2.0 spec is bit 7, TBD voltage
|
|
* Low voltage in MC 3.31 spec is bit 7, 1.65-1.95V
|
|
* Specs prior to MMC 3.31 defined bits 0-7 as voltages down to 1.5V.
|
|
* 3.31 redefined them to be reserved and also said that cards had to
|
|
* support the 2.7-3.6V and fixed the OCR to be 0xfff8000 for high voltage
|
|
* cards. MMC 4.0 says that a dual voltage card responds with 0xfff8080.
|
|
* Looks like the fine-grained control of the voltage tolerance ranges
|
|
* was abandoned.
|
|
*
|
|
* The MMC_OCR_CCS appears to be valid for only SD cards.
|
|
*/
|
|
#define MMC_OCR_VOLTAGE 0x3fffffffU /* Vdd Voltage mask */
|
|
#define MMC_OCR_LOW_VOLTAGE (1u << 7) /* Low Voltage Range -- tbd */
|
|
#define MMC_OCR_MIN_VOLTAGE_SHIFT 7
|
|
#define MMC_OCR_200_210 (1U << 8) /* Vdd voltage 2.00 ~ 2.10 */
|
|
#define MMC_OCR_210_220 (1U << 9) /* Vdd voltage 2.10 ~ 2.20 */
|
|
#define MMC_OCR_220_230 (1U << 10) /* Vdd voltage 2.20 ~ 2.30 */
|
|
#define MMC_OCR_230_240 (1U << 11) /* Vdd voltage 2.30 ~ 2.40 */
|
|
#define MMC_OCR_240_250 (1U << 12) /* Vdd voltage 2.40 ~ 2.50 */
|
|
#define MMC_OCR_250_260 (1U << 13) /* Vdd voltage 2.50 ~ 2.60 */
|
|
#define MMC_OCR_260_270 (1U << 14) /* Vdd voltage 2.60 ~ 2.70 */
|
|
#define MMC_OCR_270_280 (1U << 15) /* Vdd voltage 2.70 ~ 2.80 */
|
|
#define MMC_OCR_280_290 (1U << 16) /* Vdd voltage 2.80 ~ 2.90 */
|
|
#define MMC_OCR_290_300 (1U << 17) /* Vdd voltage 2.90 ~ 3.00 */
|
|
#define MMC_OCR_300_310 (1U << 18) /* Vdd voltage 3.00 ~ 3.10 */
|
|
#define MMC_OCR_310_320 (1U << 19) /* Vdd voltage 3.10 ~ 3.20 */
|
|
#define MMC_OCR_320_330 (1U << 20) /* Vdd voltage 3.20 ~ 3.30 */
|
|
#define MMC_OCR_330_340 (1U << 21) /* Vdd voltage 3.30 ~ 3.40 */
|
|
#define MMC_OCR_340_350 (1U << 22) /* Vdd voltage 3.40 ~ 3.50 */
|
|
#define MMC_OCR_350_360 (1U << 23) /* Vdd voltage 3.50 ~ 3.60 */
|
|
#define MMC_OCR_MAX_VOLTAGE_SHIFT 23
|
|
#define MMC_OCR_S18R (1U << 24) /* Switching to 1.8 V requested (SD) */
|
|
#define MMC_OCR_S18A MMC_OCR_S18R /* Switching to 1.8 V accepted (SD) */
|
|
#define MMC_OCR_XPC (1U << 28) /* SDXC Power Control */
|
|
#define MMC_OCR_ACCESS_MODE_BYTE (0U << 29) /* Access Mode Byte (MMC) */
|
|
#define MMC_OCR_ACCESS_MODE_SECT (1U << 29) /* Access Mode Sector (MMC) */
|
|
#define MMC_OCR_ACCESS_MODE_MASK (3U << 29)
|
|
#define MMC_OCR_CCS (1u << 30) /* Card Capacity status (SD vs SDHC) */
|
|
#define MMC_OCR_CARD_BUSY (1U << 31) /* Card Power up status */
|
|
|
|
/* CSD -- decoded structure */
|
|
struct mmc_cid {
|
|
uint32_t mid;
|
|
char pnm[8];
|
|
uint32_t psn;
|
|
uint16_t oid;
|
|
uint16_t mdt_year;
|
|
uint8_t mdt_month;
|
|
uint8_t prv;
|
|
uint8_t fwrev;
|
|
};
|
|
|
|
struct mmc_csd {
|
|
uint8_t csd_structure;
|
|
uint8_t spec_vers;
|
|
uint16_t ccc;
|
|
uint16_t tacc;
|
|
uint32_t nsac;
|
|
uint32_t r2w_factor;
|
|
uint32_t tran_speed;
|
|
uint32_t read_bl_len;
|
|
uint32_t write_bl_len;
|
|
uint32_t vdd_r_curr_min;
|
|
uint32_t vdd_r_curr_max;
|
|
uint32_t vdd_w_curr_min;
|
|
uint32_t vdd_w_curr_max;
|
|
uint32_t wp_grp_size;
|
|
uint32_t erase_sector;
|
|
uint64_t capacity;
|
|
unsigned int read_bl_partial:1,
|
|
read_blk_misalign:1,
|
|
write_bl_partial:1,
|
|
write_blk_misalign:1,
|
|
dsr_imp:1,
|
|
erase_blk_en:1,
|
|
wp_grp_enable:1;
|
|
};
|
|
|
|
struct mmc_scr {
|
|
unsigned char sda_vsn;
|
|
unsigned char bus_widths;
|
|
#define SD_SCR_BUS_WIDTH_1 (1 << 0)
|
|
#define SD_SCR_BUS_WIDTH_4 (1 << 2)
|
|
};
|
|
|
|
struct mmc_sd_status {
|
|
uint8_t bus_width;
|
|
uint8_t secured_mode;
|
|
uint16_t card_type;
|
|
uint16_t prot_area;
|
|
uint8_t speed_class;
|
|
uint8_t perf_move;
|
|
uint8_t au_size;
|
|
uint16_t erase_size;
|
|
uint8_t erase_timeout;
|
|
uint8_t erase_offset;
|
|
};
|
|
|
|
struct mmc_quirk {
|
|
uint32_t mid;
|
|
#define MMC_QUIRK_MID_ANY ((uint32_t)-1)
|
|
uint16_t oid;
|
|
#define MMC_QUIRK_OID_ANY ((uint16_t)-1)
|
|
const char *pnm;
|
|
uint32_t quirks;
|
|
#define MMC_QUIRK_INAND_CMD38 0x0001
|
|
#define MMC_QUIRK_BROKEN_TRIM 0x0002
|
|
};
|
|
|
|
#define MMC_QUIRKS_FMT "\020" "\001INAND_CMD38" "\002BROKEN_TRIM"
|
|
|
|
/*
|
|
* Various MMC/SD constants
|
|
*/
|
|
#define MMC_BOOT_RPMB_BLOCK_SIZE (128 * 1024)
|
|
|
|
#define MMC_EXTCSD_SIZE 512
|
|
|
|
#define MMC_PART_GP_MAX 4
|
|
#define MMC_PART_MAX 8
|
|
|
|
#define MMC_TUNING_MAX 64 /* Maximum tuning iterations */
|
|
#define MMC_TUNING_LEN 64 /* Size of tuning data */
|
|
#define MMC_TUNING_LEN_HS200 128 /* Size of tuning data in HS200 mode */
|
|
|
|
/*
|
|
* Older versions of the MMC standard had a variable sector size. However,
|
|
* I've been able to find no old MMC or SD cards that have a non 512
|
|
* byte sector size anywhere, so we assume that such cards are very rare
|
|
* and only note their existence in passing here...
|
|
*/
|
|
#define MMC_SECTOR_SIZE 512
|
|
|
|
#endif /* DEV_MMCREG_H */
|