1868 lines
44 KiB
C
1868 lines
44 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause
|
|
*
|
|
* Copyright (c) 2006 Marcel Moolenaar
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
/*
|
|
* PCI "universal" communications card driver configuration data (used to
|
|
* match/attach the cards).
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/ic/ns16550.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <dev/puc/puc_bus.h>
|
|
#include <dev/puc/puc_cfg.h>
|
|
#include <dev/puc/puc_bfe.h>
|
|
|
|
static puc_config_f puc_config_advantech;
|
|
static puc_config_f puc_config_amc;
|
|
static puc_config_f puc_config_diva;
|
|
static puc_config_f puc_config_exar;
|
|
static puc_config_f puc_config_exar_pcie;
|
|
static puc_config_f puc_config_icbook;
|
|
static puc_config_f puc_config_moxa;
|
|
static puc_config_f puc_config_oxford_pci954;
|
|
static puc_config_f puc_config_oxford_pcie;
|
|
static puc_config_f puc_config_quatech;
|
|
static puc_config_f puc_config_syba;
|
|
static puc_config_f puc_config_siig;
|
|
static puc_config_f puc_config_sunix;
|
|
static puc_config_f puc_config_timedia;
|
|
static puc_config_f puc_config_titan;
|
|
|
|
const struct puc_cfg puc_pci_devices[] = {
|
|
{ 0x0009, 0x7168, 0xffff, 0,
|
|
"Sunix SUN1889",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x103c, 0x1048, 0x103c, 0x1049,
|
|
"HP Diva Serial [GSP] Multiport UART - Tosca Console",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_3S, 0x10, 0, -1,
|
|
.config_function = puc_config_diva
|
|
},
|
|
|
|
{ 0x103c, 0x1048, 0x103c, 0x104a,
|
|
"HP Diva Serial [GSP] Multiport UART - Tosca Secondary",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 0, -1,
|
|
.config_function = puc_config_diva
|
|
},
|
|
|
|
{ 0x103c, 0x1048, 0x103c, 0x104b,
|
|
"HP Diva Serial [GSP] Multiport UART - Maestro SP2",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 0, -1,
|
|
.config_function = puc_config_diva
|
|
},
|
|
|
|
{ 0x103c, 0x1048, 0x103c, 0x1223,
|
|
"HP Diva Serial [GSP] Multiport UART - Superdome Console",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_3S, 0x10, 0, -1,
|
|
.config_function = puc_config_diva
|
|
},
|
|
|
|
{ 0x103c, 0x1048, 0x103c, 0x1226,
|
|
"HP Diva Serial [GSP] Multiport UART - Keystone SP2",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_3S, 0x10, 0, -1,
|
|
.config_function = puc_config_diva
|
|
},
|
|
|
|
{ 0x103c, 0x1048, 0x103c, 0x1282,
|
|
"HP Diva Serial [GSP] Multiport UART - Everest SP2",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_3S, 0x10, 0, -1,
|
|
.config_function = puc_config_diva
|
|
},
|
|
|
|
{ 0x10b5, 0x1076, 0x10b5, 0x1076,
|
|
"VScom PCI-800",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x10b5, 0x1077, 0x10b5, 0x1077,
|
|
"VScom PCI-400",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x10b5, 0x1103, 0x10b5, 0x1103,
|
|
"VScom PCI-200",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x18, 4, 0,
|
|
},
|
|
|
|
/*
|
|
* Boca Research Turbo Serial 658 (8 serial port) card.
|
|
* Appears to be the same as Chase Research PLC PCI-FAST8
|
|
* and Perle PCI-FAST8 Multi-Port serial cards.
|
|
*/
|
|
{ 0x10b5, 0x9050, 0x12e0, 0x0021,
|
|
"Boca Research Turbo Serial 658",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_8S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x10b5, 0x9050, 0x12e0, 0x0031,
|
|
"Boca Research Turbo Serial 654",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x18, 0, 8,
|
|
},
|
|
|
|
/*
|
|
* Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with
|
|
* a seemingly-lame EEPROM setup that puts the Dolphin IDs
|
|
* into the subsystem fields, and claims that it's a
|
|
* network/misc (0x02/0x80) device.
|
|
*/
|
|
{ 0x10b5, 0x9050, 0xd84d, 0x6808,
|
|
"Dolphin Peripherals 4035",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x18, 4, 0,
|
|
},
|
|
|
|
/*
|
|
* Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with
|
|
* a seemingly-lame EEPROM setup that puts the Dolphin IDs
|
|
* into the subsystem fields, and claims that it's a
|
|
* network/misc (0x02/0x80) device.
|
|
*/
|
|
{ 0x10b5, 0x9050, 0xd84d, 0x6810,
|
|
"Dolphin Peripherals 4014",
|
|
0,
|
|
PUC_PORT_2P, 0x20, 4, 0,
|
|
},
|
|
|
|
{ 0x10e8, 0x818e, 0xffff, 0,
|
|
"Applied Micro Circuits 8 Port UART",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_8S, 0x14, -1, -1,
|
|
.config_function = puc_config_amc
|
|
},
|
|
|
|
/*
|
|
* The following members of the Digi International Neo series are
|
|
* based on Exar PCI chips, f. e. the 8 port variants on XR17V258IV.
|
|
* Accordingly, the PCIe versions of these cards incorporate a PLX
|
|
* PCIe-PCI-bridge.
|
|
*/
|
|
|
|
{ 0x114f, 0x00b0, 0xffff, 0,
|
|
"Digi Neo PCI 4 Port",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x114f, 0x00b1, 0xffff, 0,
|
|
"Digi Neo PCI 8 Port",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x114f, 0x00f0, 0xffff, 0,
|
|
"Digi Neo PCIe 8 Port",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x114f, 0x00f1, 0xffff, 0,
|
|
"Digi Neo PCIe 4 Port",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x114f, 0x00f2, 0xffff, 0,
|
|
"Digi Neo PCIe 4 Port RJ45",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x114f, 0x00f3, 0xffff, 0,
|
|
"Digi Neo PCIe 8 Port RJ45",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x11fe, 0x8010, 0xffff, 0,
|
|
"Comtrol RocketPort 550/8 RJ11 part A",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x11fe, 0x8011, 0xffff, 0,
|
|
"Comtrol RocketPort 550/8 RJ11 part B",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x11fe, 0x8012, 0xffff, 0,
|
|
"Comtrol RocketPort 550/8 Octa part A",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x11fe, 0x8013, 0xffff, 0,
|
|
"Comtrol RocketPort 550/8 Octa part B",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x11fe, 0x8014, 0xffff, 0,
|
|
"Comtrol RocketPort 550/4 RJ45",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x11fe, 0x8015, 0xffff, 0,
|
|
"Comtrol RocketPort 550/Quad",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x11fe, 0x8016, 0xffff, 0,
|
|
"Comtrol RocketPort 550/16 part A",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x11fe, 0x8017, 0xffff, 0,
|
|
"Comtrol RocketPort 550/16 part B",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_12S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x11fe, 0x8018, 0xffff, 0,
|
|
"Comtrol RocketPort 550/8 part A",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x11fe, 0x8019, 0xffff, 0,
|
|
"Comtrol RocketPort 550/8 part B",
|
|
DEFAULT_RCLK * 4,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
/*
|
|
* IBM SurePOS 300 Series (481033H) serial ports
|
|
* Details can be found on the IBM RSS websites
|
|
*/
|
|
|
|
{ 0x1014, 0x0297, 0xffff, 0,
|
|
"IBM SurePOS 300 Series (481033H) serial ports",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0
|
|
},
|
|
|
|
/*
|
|
* SIIG Boards.
|
|
*
|
|
* SIIG provides documentation for their boards at:
|
|
* <URL:http://www.siig.com/downloads.asp>
|
|
*/
|
|
|
|
{ 0x131f, 0x1010, 0xffff, 0,
|
|
"SIIG Cyber I/O PCI 16C550 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S1P, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1011, 0xffff, 0,
|
|
"SIIG Cyber I/O PCI 16C650 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S1P, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1012, 0xffff, 0,
|
|
"SIIG Cyber I/O PCI 16C850 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S1P, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1021, 0xffff, 0,
|
|
"SIIG Cyber Parallel Dual PCI (10x family)",
|
|
0,
|
|
PUC_PORT_2P, 0x18, 8, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1030, 0xffff, 0,
|
|
"SIIG Cyber Serial Dual PCI 16C550 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1031, 0xffff, 0,
|
|
"SIIG Cyber Serial Dual PCI 16C650 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1032, 0xffff, 0,
|
|
"SIIG Cyber Serial Dual PCI 16C850 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1034, 0xffff, 0, /* XXX really? */
|
|
"SIIG Cyber 2S1P PCI 16C550 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S1P, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1035, 0xffff, 0, /* XXX really? */
|
|
"SIIG Cyber 2S1P PCI 16C650 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S1P, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1036, 0xffff, 0, /* XXX really? */
|
|
"SIIG Cyber 2S1P PCI 16C850 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S1P, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1050, 0xffff, 0,
|
|
"SIIG Cyber 4S PCI 16C550 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1051, 0xffff, 0,
|
|
"SIIG Cyber 4S PCI 16C650 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x1052, 0xffff, 0,
|
|
"SIIG Cyber 4S PCI 16C850 (10x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x18, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2010, 0xffff, 0,
|
|
"SIIG Cyber I/O PCI 16C550 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2011, 0xffff, 0,
|
|
"SIIG Cyber I/O PCI 16C650 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2012, 0xffff, 0,
|
|
"SIIG Cyber I/O PCI 16C850 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2021, 0xffff, 0,
|
|
"SIIG Cyber Parallel Dual PCI (20x family)",
|
|
0,
|
|
PUC_PORT_2P, 0x10, 8, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2030, 0xffff, 0,
|
|
"SIIG Cyber Serial Dual PCI 16C550 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2031, 0xffff, 0,
|
|
"SIIG Cyber Serial Dual PCI 16C650 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2032, 0xffff, 0,
|
|
"SIIG Cyber Serial Dual PCI 16C850 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2040, 0xffff, 0,
|
|
"SIIG Cyber 2P1S PCI 16C550 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S2P, 0x10, -1, 0,
|
|
.config_function = puc_config_siig
|
|
},
|
|
|
|
{ 0x131f, 0x2041, 0xffff, 0,
|
|
"SIIG Cyber 2P1S PCI 16C650 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S2P, 0x10, -1, 0,
|
|
.config_function = puc_config_siig
|
|
},
|
|
|
|
{ 0x131f, 0x2042, 0xffff, 0,
|
|
"SIIG Cyber 2P1S PCI 16C850 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S2P, 0x10, -1, 0,
|
|
.config_function = puc_config_siig
|
|
},
|
|
|
|
{ 0x131f, 0x2050, 0xffff, 0,
|
|
"SIIG Cyber 4S PCI 16C550 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2051, 0xffff, 0,
|
|
"SIIG Cyber 4S PCI 16C650 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2052, 0xffff, 0,
|
|
"SIIG Cyber 4S PCI 16C850 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2060, 0xffff, 0,
|
|
"SIIG Cyber 2S1P PCI 16C550 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2061, 0xffff, 0,
|
|
"SIIG Cyber 2S1P PCI 16C650 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2062, 0xffff, 0,
|
|
"SIIG Cyber 2S1P PCI 16C850 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x131f, 0x2081, 0xffff, 0,
|
|
"SIIG PS8000 8S PCI 16C650 (20x family)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_8S, 0x10, -1, -1,
|
|
.config_function = puc_config_siig
|
|
},
|
|
|
|
{ 0x135c, 0x0010, 0xffff, 0,
|
|
"Quatech QSC-100",
|
|
-3, /* max 8x clock rate */
|
|
PUC_PORT_4S, 0x14, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x135c, 0x0020, 0xffff, 0,
|
|
"Quatech DSC-100",
|
|
-1, /* max 2x clock rate */
|
|
PUC_PORT_2S, 0x14, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x135c, 0x0030, 0xffff, 0,
|
|
"Quatech DSC-200/300",
|
|
-1, /* max 2x clock rate */
|
|
PUC_PORT_2S, 0x14, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x135c, 0x0040, 0xffff, 0,
|
|
"Quatech QSC-200/300",
|
|
-3, /* max 8x clock rate */
|
|
PUC_PORT_4S, 0x14, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x135c, 0x0050, 0xffff, 0,
|
|
"Quatech ESC-100D",
|
|
-3, /* max 8x clock rate */
|
|
PUC_PORT_8S, 0x14, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x135c, 0x0060, 0xffff, 0,
|
|
"Quatech ESC-100M",
|
|
-3, /* max 8x clock rate */
|
|
PUC_PORT_8S, 0x14, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x135c, 0x0170, 0xffff, 0,
|
|
"Quatech QSCLP-100",
|
|
-1, /* max 2x clock rate */
|
|
PUC_PORT_4S, 0x18, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x135c, 0x0180, 0xffff, 0,
|
|
"Quatech DSCLP-100",
|
|
-1, /* max 3x clock rate */
|
|
PUC_PORT_2S, 0x18, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x135c, 0x01b0, 0xffff, 0,
|
|
"Quatech DSCLP-200/300",
|
|
-1, /* max 2x clock rate */
|
|
PUC_PORT_2S, 0x18, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x135c, 0x01e0, 0xffff, 0,
|
|
"Quatech ESCLP-100",
|
|
-3, /* max 8x clock rate */
|
|
PUC_PORT_8S, 0x10, 0, 8,
|
|
.config_function = puc_config_quatech
|
|
},
|
|
|
|
{ 0x1393, 0x1024, 0xffff, 0,
|
|
"Moxa Technologies, Smartio CP-102E/PCIe",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x14, 0, -1,
|
|
.config_function = puc_config_moxa
|
|
},
|
|
|
|
{ 0x1393, 0x1025, 0xffff, 0,
|
|
"Moxa Technologies, Smartio CP-102EL/PCIe",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x14, 0, -1,
|
|
.config_function = puc_config_moxa
|
|
},
|
|
|
|
{ 0x1393, 0x1040, 0xffff, 0,
|
|
"Moxa Technologies, Smartio C104H/PCI",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x1393, 0x1041, 0xffff, 0,
|
|
"Moxa Technologies, Smartio CP-104UL/PCI",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x1393, 0x1042, 0xffff, 0,
|
|
"Moxa Technologies, Smartio CP-104JU/PCI",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x1393, 0x1043, 0xffff, 0,
|
|
"Moxa Technologies, Smartio CP-104EL/PCIe",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x1393, 0x1045, 0xffff, 0,
|
|
"Moxa Technologies, Smartio CP-104EL-A/PCIe",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x14, 0, -1,
|
|
.config_function = puc_config_moxa
|
|
},
|
|
|
|
{ 0x1393, 0x1120, 0xffff, 0,
|
|
"Moxa Technologies, CP-112UL",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x1393, 0x1141, 0xffff, 0,
|
|
"Moxa Technologies, Industio CP-114",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x1393, 0x1144, 0xffff, 0,
|
|
"Moxa Technologies, Smartio CP-114EL/PCIe",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x14, 0, -1,
|
|
.config_function = puc_config_moxa
|
|
},
|
|
|
|
{ 0x1393, 0x1182, 0xffff, 0,
|
|
"Moxa Technologies, Smartio CP-118EL-A/PCIe",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x14, 0, -1,
|
|
.config_function = puc_config_moxa
|
|
},
|
|
|
|
{ 0x1393, 0x1680, 0xffff, 0,
|
|
"Moxa Technologies, C168H/PCI",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x1393, 0x1681, 0xffff, 0,
|
|
"Moxa Technologies, C168U/PCI",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x1393, 0x1682, 0xffff, 0,
|
|
"Moxa Technologies, CP-168EL/PCIe",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x18, 0, 8,
|
|
},
|
|
|
|
{ 0x1393, 0x1683, 0xffff, 0,
|
|
"Moxa Technologies, Smartio CP-168EL-A/PCIe",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x14, 0, -1,
|
|
.config_function = puc_config_moxa
|
|
},
|
|
|
|
{ 0x13a8, 0x0152, 0xffff, 0,
|
|
"Exar XR17C/D152",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x13a8, 0x0154, 0xffff, 0,
|
|
"Exar XR17C154",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x13a8, 0x0158, 0xffff, 0,
|
|
"Exar XR17C158",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x13a8, 0x0258, 0xffff, 0,
|
|
"Exar XR17V258IV",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar
|
|
},
|
|
|
|
{ 0x13a8, 0x0352, 0xffff, 0,
|
|
"Exar XR17V352",
|
|
125000000,
|
|
PUC_PORT_2S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar_pcie
|
|
},
|
|
|
|
/* The XR17V358 uses the 125MHz PCIe clock as its reference clock. */
|
|
{ 0x13a8, 0x0358, 0xffff, 0,
|
|
"Exar XR17V358",
|
|
125000000,
|
|
PUC_PORT_8S, 0x10, 0, -1,
|
|
.config_function = puc_config_exar_pcie
|
|
},
|
|
|
|
/*
|
|
* The Advantech PCI-1602 Rev. A use the first two ports of an Oxford
|
|
* Semiconductor OXuPCI954. Note these boards have a hardware bug in
|
|
* that they drive the RS-422/485 transmitters after power-on until a
|
|
* driver initializes the UARTs.
|
|
*/
|
|
{ 0x13fe, 0x1600, 0x1602, 0x0002,
|
|
"Advantech PCI-1602 Rev. A",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
.config_function = puc_config_advantech
|
|
},
|
|
|
|
/* Advantech PCI-1602 Rev. B1/PCI-1603 are also based on OXuPCI952. */
|
|
{ 0x13fe, 0xa102, 0x13fe, 0xa102,
|
|
"Advantech 2-port PCI (PCI-1602 Rev. B1/PCI-1603)",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
.config_function = puc_config_advantech
|
|
},
|
|
|
|
{ 0x1407, 0x0100, 0xffff, 0,
|
|
"Lava Computers Dual Serial",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x1407, 0x0101, 0xffff, 0,
|
|
"Lava Computers Quatro A",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x1407, 0x0102, 0xffff, 0,
|
|
"Lava Computers Quatro B",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x1407, 0x0120, 0xffff, 0,
|
|
"Lava Computers Quattro-PCI A",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x1407, 0x0121, 0xffff, 0,
|
|
"Lava Computers Quattro-PCI B",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x1407, 0x0180, 0xffff, 0,
|
|
"Lava Computers Octo A",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x1407, 0x0181, 0xffff, 0,
|
|
"Lava Computers Octo B",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x1409, 0x7268, 0xffff, 0,
|
|
"Sunix SUN1888",
|
|
0,
|
|
PUC_PORT_2P, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1409, 0x7168, 0xffff, 0,
|
|
NULL,
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_NONSTANDARD, 0x10, -1, -1,
|
|
.config_function = puc_config_timedia
|
|
},
|
|
|
|
/*
|
|
* Boards with an Oxford Semiconductor chip.
|
|
*
|
|
* Oxford Semiconductor provides documentation for their chip at:
|
|
* <URL:http://www.plxtech.com/products/uart/>
|
|
*
|
|
* As sold by Kouwell <URL:http://www.kouwell.com/>.
|
|
* I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports.
|
|
*/
|
|
{
|
|
0x1415, 0x9501, 0x10fc, 0xc070,
|
|
"I-O DATA RSA-PCI2/R",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x9501, 0x131f, 0x2050,
|
|
"SIIG Cyber 4 PCI 16550",
|
|
DEFAULT_RCLK * 10,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x9501, 0x131f, 0x2051,
|
|
"SIIG Cyber 4S PCI 16C650 (20x family)",
|
|
DEFAULT_RCLK * 10,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x9501, 0x131f, 0x2052,
|
|
"SIIG Quartet Serial 850",
|
|
DEFAULT_RCLK * 10,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x9501, 0x14db, 0x2150,
|
|
"Kuroutoshikou SERIAL4P-LPPCI2",
|
|
DEFAULT_RCLK * 10,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x9501, 0xffff, 0,
|
|
"Oxford Semiconductor OX16PCI954 UARTs",
|
|
0,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
.config_function = puc_config_oxford_pci954
|
|
},
|
|
|
|
{ 0x1415, 0x950a, 0x131f, 0x2030,
|
|
"SIIG Cyber 2S PCIe",
|
|
DEFAULT_RCLK * 10,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x950a, 0x131f, 0x2032,
|
|
"SIIG Cyber Serial Dual PCI 16C850",
|
|
DEFAULT_RCLK * 10,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x950a, 0x131f, 0x2061,
|
|
"SIIG Cyber 2SP1 PCIe",
|
|
DEFAULT_RCLK * 10,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x950a, 0xffff, 0,
|
|
"Oxford Semiconductor OX16PCI954 UARTs",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x9511, 0xffff, 0,
|
|
"Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1415, 0x9521, 0xffff, 0,
|
|
"Oxford Semiconductor OX16PCI952 UARTs",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x1415, 0x9538, 0xffff, 0,
|
|
"Oxford Semiconductor OX16PCI958 UARTs",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_8S, 0x18, 0, 8,
|
|
},
|
|
|
|
/*
|
|
* Perle boards use Oxford Semiconductor chips, but they store the
|
|
* Oxford Semiconductor device ID as a subvendor device ID and use
|
|
* their own device IDs.
|
|
*/
|
|
|
|
{ 0x155f, 0x0331, 0xffff, 0,
|
|
"Perle Ultraport4 Express",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x155f, 0xB012, 0xffff, 0,
|
|
"Perle Speed2 LE",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x155f, 0xB022, 0xffff, 0,
|
|
"Perle Speed2 LE",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x155f, 0xB004, 0xffff, 0,
|
|
"Perle Speed4 LE",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x155f, 0xB008, 0xffff, 0,
|
|
"Perle Speed8 LE",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x10, 0, 8,
|
|
},
|
|
|
|
/*
|
|
* Oxford Semiconductor PCI Express Expresso family
|
|
*
|
|
* Found in many 'native' PCI Express serial boards such as:
|
|
*
|
|
* eMegatech MP954ER4 (4 port) and MP958ER8 (8 port)
|
|
* <URL:http://www.emegatech.com.tw/pdrs232pcie.html>
|
|
*
|
|
* Lindy 51189 (4 port)
|
|
* <URL:http://www.lindy.com> <URL:http://tinyurl.com/lindy-51189>
|
|
*
|
|
* StarTech.com PEX4S952 (4 port) and PEX8S952 (8 port)
|
|
* <URL:http://www.startech.com>
|
|
*/
|
|
|
|
{ 0x1415, 0xc11b, 0xffff, 0,
|
|
"Oxford Semiconductor OXPCIe952 1S1P",
|
|
DEFAULT_RCLK * 0x22,
|
|
PUC_PORT_NONSTANDARD, 0x10, 0, -1,
|
|
.config_function = puc_config_oxford_pcie
|
|
},
|
|
|
|
{ 0x1415, 0xc138, 0xffff, 0,
|
|
"Oxford Semiconductor OXPCIe952 UARTs",
|
|
DEFAULT_RCLK * 0x22,
|
|
PUC_PORT_NONSTANDARD, 0x10, 0, -1,
|
|
.config_function = puc_config_oxford_pcie
|
|
},
|
|
|
|
{ 0x1415, 0xc158, 0xffff, 0,
|
|
"Oxford Semiconductor OXPCIe952 UARTs",
|
|
DEFAULT_RCLK * 0x22,
|
|
PUC_PORT_NONSTANDARD, 0x10, 0, -1,
|
|
.config_function = puc_config_oxford_pcie
|
|
},
|
|
|
|
{ 0x1415, 0xc15d, 0xffff, 0,
|
|
"Oxford Semiconductor OXPCIe952 UARTs (function 1)",
|
|
DEFAULT_RCLK * 0x22,
|
|
PUC_PORT_NONSTANDARD, 0x10, 0, -1,
|
|
.config_function = puc_config_oxford_pcie
|
|
},
|
|
|
|
{ 0x1415, 0xc208, 0xffff, 0,
|
|
"Oxford Semiconductor OXPCIe954 UARTs",
|
|
DEFAULT_RCLK * 0x22,
|
|
PUC_PORT_NONSTANDARD, 0x10, 0, -1,
|
|
.config_function = puc_config_oxford_pcie
|
|
},
|
|
|
|
{ 0x1415, 0xc20d, 0xffff, 0,
|
|
"Oxford Semiconductor OXPCIe954 UARTs (function 1)",
|
|
DEFAULT_RCLK * 0x22,
|
|
PUC_PORT_NONSTANDARD, 0x10, 0, -1,
|
|
.config_function = puc_config_oxford_pcie
|
|
},
|
|
|
|
{ 0x1415, 0xc308, 0xffff, 0,
|
|
"Oxford Semiconductor OXPCIe958 UARTs",
|
|
DEFAULT_RCLK * 0x22,
|
|
PUC_PORT_NONSTANDARD, 0x10, 0, -1,
|
|
.config_function = puc_config_oxford_pcie
|
|
},
|
|
|
|
{ 0x1415, 0xc30d, 0xffff, 0,
|
|
"Oxford Semiconductor OXPCIe958 UARTs (function 1)",
|
|
DEFAULT_RCLK * 0x22,
|
|
PUC_PORT_NONSTANDARD, 0x10, 0, -1,
|
|
.config_function = puc_config_oxford_pcie
|
|
},
|
|
|
|
{ 0x14d2, 0x8010, 0xffff, 0,
|
|
"VScom PCI-100L",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_1S, 0x14, 0, 0,
|
|
},
|
|
|
|
{ 0x14d2, 0x8020, 0xffff, 0,
|
|
"VScom PCI-200L",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x14, 4, 0,
|
|
},
|
|
|
|
{ 0x14d2, 0x8028, 0xffff, 0,
|
|
"VScom 200Li",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x20, 0, 8,
|
|
},
|
|
|
|
/*
|
|
* VScom (Titan?) PCI-800L. More modern variant of the
|
|
* PCI-800. Uses 6 discrete 16550 UARTs, plus another
|
|
* two of them obviously implemented as macro cells in
|
|
* the ASIC. This causes the weird port access pattern
|
|
* below, where two of the IO port ranges each access
|
|
* one of the ASIC UARTs, and a block of IO addresses
|
|
* access the external UARTs.
|
|
*/
|
|
{ 0x14d2, 0x8080, 0xffff, 0,
|
|
"Titan VScom PCI-800L",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, 0x14, -1, -1,
|
|
.config_function = puc_config_titan
|
|
},
|
|
|
|
/*
|
|
* VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers
|
|
* 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has
|
|
* device ID 3 and PCI device 1 device ID 4.
|
|
*/
|
|
{ 0x14d2, 0xa003, 0xffff, 0,
|
|
"Titan PCI-800H",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x14d2, 0xa004, 0xffff, 0,
|
|
"Titan PCI-800H",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x14d2, 0xa005, 0xffff, 0,
|
|
"Titan PCI-200H",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x14d2, 0xe020, 0xffff, 0,
|
|
"Titan VScom PCI-200HV2",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x14d2, 0xa007, 0xffff, 0,
|
|
"Titan VScom PCIex-800H",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x14d2, 0xa008, 0xffff, 0,
|
|
"Titan VScom PCIex-800H",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x14db, 0x2130, 0xffff, 0,
|
|
"Avlab Technology, PCI IO 2S",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x14db, 0x2150, 0xffff, 0,
|
|
"Avlab Low Profile PCI 4 Serial",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x14db, 0x2152, 0xffff, 0,
|
|
"Avlab Low Profile PCI 4 Serial",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x1592, 0x0781, 0xffff, 0,
|
|
"Syba Tech Ltd. PCI-4S2P-550-ECP",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S1P, 0x10, 0, -1,
|
|
.config_function = puc_config_syba
|
|
},
|
|
|
|
{ 0x1fd4, 0x1999, 0x1fd4, 0x0002,
|
|
"Sunix SER5xxxx 2-port serial",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1fd4, 0x1999, 0x1fd4, 0x0004,
|
|
"Sunix SER5xxxx 4-port serial",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0x1fd4, 0x1999, 0x1fd4, 0x0008,
|
|
"Sunix SER5xxxx 8-port serial",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_8S, -1, -1, -1,
|
|
.config_function = puc_config_sunix
|
|
},
|
|
|
|
{ 0x1fd4, 0x1999, 0x1fd4, 0x0101,
|
|
"Sunix MIO5xxxx 1-port serial and 1284 Printer port",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_1S1P, -1, -1, -1,
|
|
.config_function = puc_config_sunix
|
|
},
|
|
|
|
{ 0x1fd4, 0x1999, 0x1fd4, 0x0102,
|
|
"Sunix MIO5xxxx 2-port serial and 1284 Printer port",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_2S1P, -1, -1, -1,
|
|
.config_function = puc_config_sunix
|
|
},
|
|
|
|
{ 0x1fd4, 0x1999, 0x1fd4, 0x0104,
|
|
"Sunix MIO5xxxx 4-port serial and 1284 Printer port",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_4S1P, -1, -1, -1,
|
|
.config_function = puc_config_sunix
|
|
},
|
|
|
|
{ 0x5372, 0x6872, 0xffff, 0,
|
|
"Feasso PCI FPP-02 2S1P",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x5372, 0x6873, 0xffff, 0,
|
|
"Sun 1040 PCI Quad Serial",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x6666, 0x0001, 0xffff, 0,
|
|
"Decision Computer Inc, PCCOM 4-port serial",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x1c, 0, 8,
|
|
},
|
|
|
|
{ 0x6666, 0x0002, 0xffff, 0,
|
|
"Decision Computer Inc, PCCOM 8-port serial",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_8S, 0x1c, 0, 8,
|
|
},
|
|
|
|
{ 0x6666, 0x0004, 0xffff, 0,
|
|
"PCCOM dual port RS232/422/485",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x1c, 0, 8,
|
|
},
|
|
|
|
{ 0x9710, 0x9815, 0xffff, 0,
|
|
"NetMos NM9815 Dual 1284 Printer port",
|
|
0,
|
|
PUC_PORT_2P, 0x10, 8, 0,
|
|
},
|
|
|
|
/*
|
|
* This is more specific than the generic NM9835 entry, and is placed
|
|
* here to _prevent_ puc(4) from claiming this single port card.
|
|
*
|
|
* uart(4) will claim this device.
|
|
*/
|
|
{ 0x9710, 0x9835, 0x1000, 1,
|
|
"NetMos NM9835 based 1-port serial",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9835, 0x1000, 2,
|
|
"NetMos NM9835 based 2-port serial",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9835, 0xffff, 0,
|
|
"NetMos NM9835 Dual UART and 1284 Printer port",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9845, 0x1000, 0x0006,
|
|
"NetMos NM9845 6 Port UART",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_6S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9845, 0xffff, 0,
|
|
"NetMos NM9845 Quad UART and 1284 Printer port",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9865, 0xa000, 0x3002,
|
|
"NetMos NM9865 Dual UART",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9865, 0xa000, 0x3003,
|
|
"NetMos NM9865 Triple UART",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_3S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9865, 0xa000, 0x3004,
|
|
"NetMos NM9865 Quad UART",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9865, 0xa000, 0x3011,
|
|
"NetMos NM9865 Single UART and 1284 Printer port",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_1S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9865, 0xa000, 0x3012,
|
|
"NetMos NM9865 Dual UART and 1284 Printer port",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S1P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0x9710, 0x9865, 0xa000, 0x3020,
|
|
"NetMos NM9865 Dual 1284 Printer port",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2P, 0x10, 4, 0,
|
|
},
|
|
|
|
{ 0xb00c, 0x021c, 0xffff, 0,
|
|
"IC Book Labs Gunboat x4 Lite",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
.config_function = puc_config_icbook
|
|
},
|
|
|
|
{ 0xb00c, 0x031c, 0xffff, 0,
|
|
"IC Book Labs Gunboat x4 Pro",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
.config_function = puc_config_icbook
|
|
},
|
|
|
|
{ 0xb00c, 0x041c, 0xffff, 0,
|
|
"IC Book Labs Ironclad x8 Lite",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_8S, 0x10, 0, 8,
|
|
.config_function = puc_config_icbook
|
|
},
|
|
|
|
{ 0xb00c, 0x051c, 0xffff, 0,
|
|
"IC Book Labs Ironclad x8 Pro",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_8S, 0x10, 0, 8,
|
|
.config_function = puc_config_icbook
|
|
},
|
|
|
|
{ 0xb00c, 0x081c, 0xffff, 0,
|
|
"IC Book Labs Dreadnought x16 Pro",
|
|
DEFAULT_RCLK * 8,
|
|
PUC_PORT_16S, 0x10, 0, 8,
|
|
.config_function = puc_config_icbook
|
|
},
|
|
|
|
{ 0xb00c, 0x091c, 0xffff, 0,
|
|
"IC Book Labs Dreadnought x16 Lite",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_16S, 0x10, 0, 8,
|
|
.config_function = puc_config_icbook
|
|
},
|
|
|
|
{ 0xb00c, 0x0a1c, 0xffff, 0,
|
|
"IC Book Labs Gunboat x2 Low Profile",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_2S, 0x10, 0, 8,
|
|
},
|
|
|
|
{ 0xb00c, 0x0b1c, 0xffff, 0,
|
|
"IC Book Labs Gunboat x4 Low Profile",
|
|
DEFAULT_RCLK,
|
|
PUC_PORT_4S, 0x10, 0, 8,
|
|
.config_function = puc_config_icbook
|
|
},
|
|
{ 0xffff, 0, 0xffff, 0, NULL, 0 }
|
|
};
|
|
|
|
static int
|
|
puc_config_advantech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
|
|
intptr_t *res __unused)
|
|
{
|
|
const struct puc_cfg *cfg;
|
|
struct resource *cres;
|
|
struct puc_bar *bar;
|
|
device_t cdev, dev;
|
|
bus_size_t off;
|
|
int base, crtype, fixed, high, i, oxpcie;
|
|
uint8_t acr, func, mask;
|
|
|
|
if (cmd != PUC_CFG_SETUP)
|
|
return (ENXIO);
|
|
|
|
base = fixed = oxpcie = 0;
|
|
crtype = SYS_RES_IOPORT;
|
|
acr = mask = 0x0;
|
|
func = high = 1;
|
|
off = 0x60;
|
|
|
|
cfg = sc->sc_cfg;
|
|
switch (cfg->subvendor) {
|
|
case 0x13fe:
|
|
switch (cfg->device) {
|
|
case 0xa102:
|
|
high = 0;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
if (fixed == 1)
|
|
goto setup;
|
|
|
|
dev = sc->sc_dev;
|
|
cdev = pci_find_dbsf(pci_get_domain(dev), pci_get_bus(dev),
|
|
pci_get_slot(dev), func);
|
|
if (cdev == NULL) {
|
|
device_printf(dev, "could not find config function\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
i = PCIR_BAR(0);
|
|
cres = bus_alloc_resource_any(cdev, crtype, &i, RF_ACTIVE);
|
|
if (cres == NULL) {
|
|
device_printf(dev, "could not allocate config resource\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (oxpcie == 0) {
|
|
mask = bus_read_1(cres, off);
|
|
if (pci_get_function(dev) == 1)
|
|
base = 4;
|
|
}
|
|
|
|
setup:
|
|
for (i = 0; i < sc->sc_nports; ++i) {
|
|
device_printf(dev, "port %d: ", i);
|
|
bar = puc_get_bar(sc, cfg->rid + i * cfg->d_rid);
|
|
if (bar == NULL) {
|
|
printf("could not get BAR\n");
|
|
continue;
|
|
}
|
|
|
|
if (fixed == 0) {
|
|
if ((mask & (1 << (base + i))) == 0) {
|
|
acr = 0;
|
|
printf("RS-232\n");
|
|
} else {
|
|
acr = (high == 1 ? 0x18 : 0x10);
|
|
printf("RS-422/RS-485, active-%s auto-DTR\n",
|
|
high == 1 ? "high" : "low");
|
|
}
|
|
}
|
|
|
|
bus_write_1(bar->b_res, REG_SPR, REG_ACR);
|
|
bus_write_1(bar->b_res, REG_ICR, acr);
|
|
}
|
|
|
|
bus_release_resource(cdev, crtype, rman_get_rid(cres), cres);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
puc_config_amc(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, int port,
|
|
intptr_t *res)
|
|
{
|
|
|
|
switch (cmd) {
|
|
case PUC_CFG_GET_OFS:
|
|
*res = 8 * (port & 1);
|
|
return (0);
|
|
case PUC_CFG_GET_RID:
|
|
*res = 0x14 + (port >> 1) * 4;
|
|
return (0);
|
|
default:
|
|
break;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
|
|
intptr_t *res)
|
|
{
|
|
const struct puc_cfg *cfg = sc->sc_cfg;
|
|
|
|
if (cmd == PUC_CFG_GET_OFS) {
|
|
if (cfg->subdevice == 0x1282) /* Everest SP */
|
|
port <<= 1;
|
|
else if (cfg->subdevice == 0x104b) /* Maestro SP2 */
|
|
port = (port == 3) ? 4 : port;
|
|
*res = port * 8 + ((port > 2) ? 0x18 : 0);
|
|
return (0);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_exar(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd,
|
|
int port, intptr_t *res)
|
|
{
|
|
|
|
if (cmd == PUC_CFG_GET_OFS) {
|
|
*res = port * 0x200;
|
|
return (0);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_exar_pcie(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd,
|
|
int port, intptr_t *res)
|
|
{
|
|
|
|
if (cmd == PUC_CFG_GET_OFS) {
|
|
*res = port * 0x400;
|
|
return (0);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_icbook(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd,
|
|
int port __unused, intptr_t *res)
|
|
{
|
|
|
|
if (cmd == PUC_CFG_GET_ILR) {
|
|
*res = PUC_ILR_DIGI;
|
|
return (0);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_moxa(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
|
|
intptr_t *res)
|
|
{
|
|
const struct puc_cfg *cfg = sc->sc_cfg;
|
|
|
|
if (cmd == PUC_CFG_GET_OFS) {
|
|
if (port == 3 && (cfg->device == 0x1045 ||
|
|
cfg->device == 0x1144))
|
|
port = 7;
|
|
*res = port * 0x200;
|
|
|
|
return 0;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd,
|
|
int port __unused, intptr_t *res)
|
|
{
|
|
const struct puc_cfg *cfg = sc->sc_cfg;
|
|
struct puc_bar *bar;
|
|
uint8_t v0, v1;
|
|
|
|
switch (cmd) {
|
|
case PUC_CFG_SETUP:
|
|
/*
|
|
* Check if the scratchpad register is enabled or if the
|
|
* interrupt status and options registers are active.
|
|
*/
|
|
bar = puc_get_bar(sc, cfg->rid);
|
|
if (bar == NULL)
|
|
return (ENXIO);
|
|
bus_write_1(bar->b_res, REG_LCR, LCR_DLAB);
|
|
bus_write_1(bar->b_res, REG_SPR, 0);
|
|
v0 = bus_read_1(bar->b_res, REG_SPR);
|
|
bus_write_1(bar->b_res, REG_SPR, 0x80 + -cfg->clock);
|
|
v1 = bus_read_1(bar->b_res, REG_SPR);
|
|
bus_write_1(bar->b_res, REG_LCR, 0);
|
|
sc->sc_cfg_data = (v0 << 8) | v1;
|
|
if (v0 == 0 && v1 == 0x80 + -cfg->clock) {
|
|
/*
|
|
* The SPR register echoed the two values written
|
|
* by us. This means that the SPAD jumper is set.
|
|
*/
|
|
device_printf(sc->sc_dev, "warning: extra features "
|
|
"not usable -- SPAD compatibility enabled\n");
|
|
return (0);
|
|
}
|
|
if (v0 != 0) {
|
|
/*
|
|
* The first value doesn't match. This can only mean
|
|
* that the SPAD jumper is not set and that a non-
|
|
* standard fixed clock multiplier jumper is set.
|
|
*/
|
|
if (bootverbose)
|
|
device_printf(sc->sc_dev, "fixed clock rate "
|
|
"multiplier of %d\n", 1 << v0);
|
|
if (v0 < -cfg->clock)
|
|
device_printf(sc->sc_dev, "warning: "
|
|
"suboptimal fixed clock rate multiplier "
|
|
"setting\n");
|
|
return (0);
|
|
}
|
|
/*
|
|
* The first value matched, but the second didn't. We know
|
|
* that the SPAD jumper is not set. We also know that the
|
|
* clock rate multiplier is software controlled *and* that
|
|
* we just programmed it to the maximum allowed.
|
|
*/
|
|
if (bootverbose)
|
|
device_printf(sc->sc_dev, "clock rate multiplier of "
|
|
"%d selected\n", 1 << -cfg->clock);
|
|
return (0);
|
|
case PUC_CFG_GET_CLOCK:
|
|
v0 = (sc->sc_cfg_data >> 8) & 0xff;
|
|
v1 = sc->sc_cfg_data & 0xff;
|
|
if (v0 == 0 && v1 == 0x80 + -cfg->clock) {
|
|
/*
|
|
* XXX With the SPAD jumper applied, there's no
|
|
* easy way of knowing if there's also a clock
|
|
* rate multiplier jumper installed. Let's hope
|
|
* not ...
|
|
*/
|
|
*res = DEFAULT_RCLK;
|
|
} else if (v0 == 0) {
|
|
/*
|
|
* No clock rate multiplier jumper installed,
|
|
* so we programmed the board with the maximum
|
|
* multiplier allowed as given to us in the
|
|
* clock field of the config record (negated).
|
|
*/
|
|
*res = DEFAULT_RCLK << -cfg->clock;
|
|
} else
|
|
*res = DEFAULT_RCLK << v0;
|
|
return (0);
|
|
case PUC_CFG_GET_ILR:
|
|
v0 = (sc->sc_cfg_data >> 8) & 0xff;
|
|
v1 = sc->sc_cfg_data & 0xff;
|
|
*res = (v0 == 0 && v1 == 0x80 + -cfg->clock) ?
|
|
PUC_ILR_NONE : PUC_ILR_QUATECH;
|
|
return (0);
|
|
default:
|
|
break;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
|
|
intptr_t *res)
|
|
{
|
|
static int base[] = { 0x251, 0x3f0, 0 };
|
|
const struct puc_cfg *cfg = sc->sc_cfg;
|
|
struct puc_bar *bar;
|
|
int efir, idx, ofs;
|
|
uint8_t v;
|
|
|
|
switch (cmd) {
|
|
case PUC_CFG_SETUP:
|
|
bar = puc_get_bar(sc, cfg->rid);
|
|
if (bar == NULL)
|
|
return (ENXIO);
|
|
|
|
/* configure both W83877TFs */
|
|
bus_write_1(bar->b_res, 0x250, 0x89);
|
|
bus_write_1(bar->b_res, 0x3f0, 0x87);
|
|
bus_write_1(bar->b_res, 0x3f0, 0x87);
|
|
idx = 0;
|
|
while (base[idx] != 0) {
|
|
efir = base[idx];
|
|
bus_write_1(bar->b_res, efir, 0x09);
|
|
v = bus_read_1(bar->b_res, efir + 1);
|
|
if ((v & 0x0f) != 0x0c)
|
|
return (ENXIO);
|
|
bus_write_1(bar->b_res, efir, 0x16);
|
|
v = bus_read_1(bar->b_res, efir + 1);
|
|
bus_write_1(bar->b_res, efir, 0x16);
|
|
bus_write_1(bar->b_res, efir + 1, v | 0x04);
|
|
bus_write_1(bar->b_res, efir, 0x16);
|
|
bus_write_1(bar->b_res, efir + 1, v & ~0x04);
|
|
ofs = base[idx] & 0x300;
|
|
bus_write_1(bar->b_res, efir, 0x23);
|
|
bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2);
|
|
bus_write_1(bar->b_res, efir, 0x24);
|
|
bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2);
|
|
bus_write_1(bar->b_res, efir, 0x25);
|
|
bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2);
|
|
bus_write_1(bar->b_res, efir, 0x17);
|
|
bus_write_1(bar->b_res, efir + 1, 0x03);
|
|
bus_write_1(bar->b_res, efir, 0x28);
|
|
bus_write_1(bar->b_res, efir + 1, 0x43);
|
|
idx++;
|
|
}
|
|
bus_write_1(bar->b_res, 0x250, 0xaa);
|
|
bus_write_1(bar->b_res, 0x3f0, 0xaa);
|
|
return (0);
|
|
case PUC_CFG_GET_OFS:
|
|
switch (port) {
|
|
case 0:
|
|
*res = 0x2f8;
|
|
return (0);
|
|
case 1:
|
|
*res = 0x2e8;
|
|
return (0);
|
|
case 2:
|
|
*res = 0x3f8;
|
|
return (0);
|
|
case 3:
|
|
*res = 0x3e8;
|
|
return (0);
|
|
case 4:
|
|
*res = 0x278;
|
|
return (0);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
|
|
intptr_t *res)
|
|
{
|
|
const struct puc_cfg *cfg = sc->sc_cfg;
|
|
|
|
switch (cmd) {
|
|
case PUC_CFG_GET_OFS:
|
|
if (cfg->ports == PUC_PORT_8S) {
|
|
*res = (port > 4) ? 8 * (port - 4) : 0;
|
|
return (0);
|
|
}
|
|
break;
|
|
case PUC_CFG_GET_RID:
|
|
if (cfg->ports == PUC_PORT_8S) {
|
|
*res = 0x10 + ((port > 4) ? 0x10 : 4 * port);
|
|
return (0);
|
|
}
|
|
if (cfg->ports == PUC_PORT_2S1P) {
|
|
switch (port) {
|
|
case 0: *res = 0x10; return (0);
|
|
case 1: *res = 0x14; return (0);
|
|
case 2: *res = 0x1c; return (0);
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
|
|
intptr_t *res)
|
|
{
|
|
static const uint16_t dual[] = {
|
|
0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
|
|
0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
|
|
0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
|
|
0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
|
|
0xD079, 0
|
|
};
|
|
static const uint16_t quad[] = {
|
|
0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
|
|
0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
|
|
0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
|
|
0xB157, 0
|
|
};
|
|
static const uint16_t octa[] = {
|
|
0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
|
|
0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
|
|
};
|
|
static const struct {
|
|
int ports;
|
|
const uint16_t *ids;
|
|
} subdevs[] = {
|
|
{ 2, dual },
|
|
{ 4, quad },
|
|
{ 8, octa },
|
|
{ 0, NULL }
|
|
};
|
|
static char desc[64];
|
|
int dev, id;
|
|
uint16_t subdev;
|
|
|
|
switch (cmd) {
|
|
case PUC_CFG_GET_CLOCK:
|
|
if (port < 2)
|
|
*res = DEFAULT_RCLK * 8;
|
|
else
|
|
*res = DEFAULT_RCLK;
|
|
return (0);
|
|
case PUC_CFG_GET_DESC:
|
|
snprintf(desc, sizeof(desc),
|
|
"Timedia technology %d Port Serial", (int)sc->sc_cfg_data);
|
|
*res = (intptr_t)desc;
|
|
return (0);
|
|
case PUC_CFG_GET_NPORTS:
|
|
subdev = pci_get_subdevice(sc->sc_dev);
|
|
dev = 0;
|
|
while (subdevs[dev].ports != 0) {
|
|
id = 0;
|
|
while (subdevs[dev].ids[id] != 0) {
|
|
if (subdev == subdevs[dev].ids[id]) {
|
|
sc->sc_cfg_data = subdevs[dev].ports;
|
|
*res = sc->sc_cfg_data;
|
|
return (0);
|
|
}
|
|
id++;
|
|
}
|
|
dev++;
|
|
}
|
|
return (ENXIO);
|
|
case PUC_CFG_GET_OFS:
|
|
*res = (port == 1 || port == 3) ? 8 : 0;
|
|
return (0);
|
|
case PUC_CFG_GET_RID:
|
|
*res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4;
|
|
return (0);
|
|
case PUC_CFG_GET_TYPE:
|
|
*res = PUC_TYPE_SERIAL;
|
|
return (0);
|
|
default:
|
|
break;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_oxford_pci954(struct puc_softc *sc, enum puc_cfg_cmd cmd,
|
|
int port __unused, intptr_t *res)
|
|
{
|
|
|
|
switch (cmd) {
|
|
case PUC_CFG_GET_CLOCK:
|
|
/*
|
|
* OXu16PCI954 use a 14.7456 MHz clock by default while
|
|
* OX16PCI954 and OXm16PCI954 employ a 1.8432 MHz one.
|
|
*/
|
|
if (pci_get_revid(sc->sc_dev) == 1)
|
|
*res = DEFAULT_RCLK * 8;
|
|
else
|
|
*res = DEFAULT_RCLK;
|
|
return (0);
|
|
default:
|
|
break;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_oxford_pcie(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
|
|
intptr_t *res)
|
|
{
|
|
const struct puc_cfg *cfg = sc->sc_cfg;
|
|
int idx;
|
|
struct puc_bar *bar;
|
|
uint8_t value;
|
|
|
|
switch (cmd) {
|
|
case PUC_CFG_SETUP:
|
|
device_printf(sc->sc_dev, "%d UARTs detected\n",
|
|
sc->sc_nports);
|
|
|
|
/* Set UARTs to enhanced mode */
|
|
bar = puc_get_bar(sc, cfg->rid);
|
|
if (bar == NULL)
|
|
return (ENXIO);
|
|
for (idx = 0; idx < sc->sc_nports; idx++) {
|
|
value = bus_read_1(bar->b_res, 0x1000 + (idx << 9) +
|
|
0x92);
|
|
bus_write_1(bar->b_res, 0x1000 + (idx << 9) + 0x92,
|
|
value | 0x10);
|
|
}
|
|
return (0);
|
|
case PUC_CFG_GET_LEN:
|
|
*res = 0x200;
|
|
return (0);
|
|
case PUC_CFG_GET_NPORTS:
|
|
/*
|
|
* Check if we are being called from puc_bfe_attach()
|
|
* or puc_bfe_probe(). If puc_bfe_probe(), we cannot
|
|
* puc_get_bar(), so we return a value of 16. This has
|
|
* cosmetic side-effects at worst; in PUC_CFG_GET_DESC,
|
|
* sc->sc_cfg_data will not contain the true number of
|
|
* ports in PUC_CFG_GET_DESC, but we are not implementing
|
|
* that call for this device family anyway.
|
|
*
|
|
* The check is for initialization of sc->sc_bar[idx],
|
|
* which is only done in puc_bfe_attach().
|
|
*/
|
|
idx = 0;
|
|
do {
|
|
if (sc->sc_bar[idx++].b_rid != -1) {
|
|
sc->sc_cfg_data = 16;
|
|
*res = sc->sc_cfg_data;
|
|
return (0);
|
|
}
|
|
} while (idx < PUC_PCI_BARS);
|
|
|
|
bar = puc_get_bar(sc, cfg->rid);
|
|
if (bar == NULL)
|
|
return (ENXIO);
|
|
|
|
value = bus_read_1(bar->b_res, 0x04);
|
|
if (value == 0)
|
|
return (ENXIO);
|
|
|
|
sc->sc_cfg_data = value;
|
|
*res = sc->sc_cfg_data;
|
|
return (0);
|
|
case PUC_CFG_GET_OFS:
|
|
*res = 0x1000 + (port << 9);
|
|
return (0);
|
|
case PUC_CFG_GET_TYPE:
|
|
*res = PUC_TYPE_SERIAL;
|
|
return (0);
|
|
default:
|
|
break;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_sunix(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
|
|
intptr_t *res)
|
|
{
|
|
int error;
|
|
|
|
switch (cmd) {
|
|
case PUC_CFG_GET_OFS:
|
|
error = puc_config(sc, PUC_CFG_GET_TYPE, port, res);
|
|
if (error != 0)
|
|
return (error);
|
|
*res = (*res == PUC_TYPE_SERIAL) ? (port & 3) * 8 : 0;
|
|
return (0);
|
|
case PUC_CFG_GET_RID:
|
|
error = puc_config(sc, PUC_CFG_GET_TYPE, port, res);
|
|
if (error != 0)
|
|
return (error);
|
|
*res = (*res == PUC_TYPE_SERIAL && port <= 3) ? 0x10 : 0x14;
|
|
return (0);
|
|
default:
|
|
break;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
puc_config_titan(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd,
|
|
int port, intptr_t *res)
|
|
{
|
|
|
|
switch (cmd) {
|
|
case PUC_CFG_GET_OFS:
|
|
*res = (port < 3) ? 0 : (port - 2) << 3;
|
|
return (0);
|
|
case PUC_CFG_GET_RID:
|
|
*res = 0x14 + ((port >= 2) ? 0x0c : port << 2);
|
|
return (0);
|
|
default:
|
|
break;
|
|
}
|
|
return (ENXIO);
|
|
}
|