freebsd-dev/sys/dev/uart/uart.h
Warner Losh 95ee2897e9 sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
2023-08-16 11:54:11 -06:00

126 lines
3.7 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2003 Marcel Moolenaar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_UART_H_
#define _DEV_UART_H_
/*
* Bus access structure. This structure holds the minimum information needed
* to access the UART. The rclk field, although not important to actually
* access the UART, is important for baudrate programming, delay loops and
* other timing related computations.
*/
struct uart_bas {
bus_space_tag_t bst;
bus_space_handle_t bsh;
u_int chan;
u_int rclk;
u_int regshft;
u_int regiowidth;
u_int busy_detect;
};
#define uart_regofs(bas, reg) ((reg) << (bas)->regshft)
#define uart_regiowidth(bas) ((bas)->regiowidth)
static inline uint32_t
uart_getreg(struct uart_bas *bas, int reg)
{
uint32_t ret;
switch (uart_regiowidth(bas)) {
case 4:
ret = bus_space_read_4(bas->bst, bas->bsh, uart_regofs(bas, reg));
break;
case 2:
ret = bus_space_read_2(bas->bst, bas->bsh, uart_regofs(bas, reg));
break;
default:
ret = bus_space_read_1(bas->bst, bas->bsh, uart_regofs(bas, reg));
break;
}
return (ret);
}
static inline void
uart_setreg(struct uart_bas *bas, int reg, int value)
{
switch (uart_regiowidth(bas)) {
case 4:
bus_space_write_4(bas->bst, bas->bsh, uart_regofs(bas, reg), value);
break;
case 2:
bus_space_write_2(bas->bst, bas->bsh, uart_regofs(bas, reg), value);
break;
default:
bus_space_write_1(bas->bst, bas->bsh, uart_regofs(bas, reg), value);
break;
}
}
/*
* XXX we don't know the length of the bus space address range in use by
* the UART. Since barriers don't use the length field currently, we put
* a zero there for now.
*/
#define uart_barrier(bas) \
bus_space_barrier((bas)->bst, (bas)->bsh, 0, 0, \
BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE)
/*
* UART device classes.
*/
struct uart_class;
extern struct uart_class uart_ns8250_class __attribute__((weak));
extern struct uart_class uart_quicc_class __attribute__((weak));
extern struct uart_class uart_z8530_class __attribute__((weak));
/*
* Device flags.
*/
#define UART_FLAGS_CONSOLE(f) ((f) & 0x10)
#define UART_FLAGS_DBGPORT(f) ((f) & 0x80)
#define UART_FLAGS_FCR_RX_LOW(f) ((f) & 0x100)
#define UART_FLAGS_FCR_RX_MEDL(f) ((f) & 0x200)
#define UART_FLAGS_FCR_RX_MEDH(f) ((f) & 0x400)
#define UART_FLAGS_FCR_RX_HIGH(f) ((f) & 0x800)
/*
* Data parity values (magical numbers related to ns8250).
*/
#define UART_PARITY_NONE 0
#define UART_PARITY_ODD 1
#define UART_PARITY_EVEN 3
#define UART_PARITY_MARK 5
#define UART_PARITY_SPACE 7
#endif /* _DEV_UART_H_ */