freebsd-dev/sys/isa/rtc.h
Warner Losh 2ff63af9b8 sys: Remove $FreeBSD$: one-line .h pattern
Remove /^\s*\*+\s*\$FreeBSD\$.*$\n/
2023-08-16 11:54:18 -06:00

124 lines
5.0 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)rtc.h 7.1 (Berkeley) 5/12/91
*/
#ifndef _I386_ISA_RTC_H_
#define _I386_ISA_RTC_H_ 1
/*
* MC146818 RTC Register locations
*/
#define RTC_SEC 0x00 /* seconds */
#define RTC_SECALRM 0x01 /* seconds alarm */
#define RTC_MIN 0x02 /* minutes */
#define RTC_MINALRM 0x03 /* minutes alarm */
#define RTC_HRS 0x04 /* hours */
#define RTC_HRSALRM 0x05 /* hours alarm */
#define RTC_WDAY 0x06 /* week day */
#define RTC_DAY 0x07 /* day of month */
#define RTC_MONTH 0x08 /* month of year */
#define RTC_YEAR 0x09 /* month of year */
#define RTC_STATUSA 0x0a /* status register A */
#define RTCSA_TUP 0x80 /* time update, don't look now */
#define RTCSA_RESET 0x70 /* reset divider */
#define RTCSA_DIVIDER 0x20 /* divider correct for 32768 Hz */
#define RTCSA_8192 0x03 /* 8192 Hz interrupt */
#define RTCSA_4096 0x04
#define RTCSA_2048 0x05
#define RTCSA_1024 0x06 /* default for profiling */
#define RTCSA_PROF RTCSA_1024
#define RTC_PROFRATE 1024
#define RTCSA_512 0x07
#define RTCSA_256 0x08
#define RTCSA_128 0x09
#define RTCSA_NOPROF RTCSA_128
#define RTC_NOPROFRATE 128
#define RTCSA_64 0x0a
#define RTCSA_32 0x0b /* 32 Hz interrupt */
#define RTC_STATUSB 0x0b /* status register B */
#define RTCSB_DST 0x01 /* USA Daylight Savings Time enable */
#define RTCSB_24HR 0x02 /* 0 = 12 hours, 1 = 24 hours */
#define RTCSB_BCD 0x04 /* 0 = BCD, 1 = Binary coded time */
#define RTCSB_SQWE 0x08 /* 1 = output sqare wave at SQW pin */
#define RTCSB_UINTR 0x10 /* 1 = enable update-ended interrupt */
#define RTCSB_AINTR 0x20 /* 1 = enable alarm interrupt */
#define RTCSB_PINTR 0x40 /* 1 = enable periodic clock interrupt */
#define RTCSB_HALT 0x80 /* stop clock updates */
#define RTC_INTR 0x0c /* status register C (R) interrupt source */
#define RTCIR_UPDATE 0x10 /* update intr */
#define RTCIR_ALARM 0x20 /* alarm intr */
#define RTCIR_PERIOD 0x40 /* periodic intr */
#define RTCIR_INT 0x80 /* interrupt output signal */
#define RTC_STATUSD 0x0d /* status register D (R) Lost Power */
#define RTCSD_PWR 0x80 /* clock power OK */
#define RTC_DIAG 0x0e /* status register E - bios diagnostic */
#define RTCDG_BITS "\020\010clock_battery\007ROM_cksum\006config_unit\005memory_size\004fixed_disk\003invalid_time"
#define RTC_RESET 0x0f /* status register F - reset code byte */
#define RTCRS_RST 0x00 /* normal reset */
#define RTCRS_LOAD 0x04 /* load system */
#define RTC_FDISKETTE 0x10 /* diskette drive type in upper/lower nibble */
#define RTCFDT_NONE 0 /* none present */
#define RTCFDT_360K 0x10 /* 360K */
#define RTCFDT_12M 0x20 /* 1.2M */
#define RTCFDT_720K 0x30 /* 720K */
#define RTCFDT_144M 0x40 /* 1.44M */
#define RTCFDT_288M_1 0x50 /* 2.88M, some BIOSes */
#define RTCFDT_288M 0x60 /* 2.88M */
#define RTC_BASELO 0x15 /* low byte of basemem size */
#define RTC_BASEHI 0x16 /* high byte of basemem size */
#define RTC_EXTLO 0x17 /* low byte of extended mem size */
#define RTC_EXTHI 0x18 /* low byte of extended mem size */
#define RTC_CENTURY 0x32 /* current century */
#ifdef _KERNEL
extern struct mtx atrtc_time_lock;
extern int atrtcclock_disable;
int rtcin(int reg);
void atrtc_restore(void);
void writertc(int reg, u_char val);
#endif
#endif /* _I386_ISA_RTC_H_ */