624 lines
21 KiB
C
624 lines
21 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause
|
|
*
|
|
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
/*
|
|
* IEEE 802.11 PHY-related support.
|
|
*/
|
|
|
|
#include "opt_inet.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/route.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_phy.h>
|
|
|
|
#ifdef notyet
|
|
struct ieee80211_ds_plcp_hdr {
|
|
uint8_t i_signal;
|
|
uint8_t i_service;
|
|
uint16_t i_length;
|
|
uint16_t i_crc;
|
|
} __packed;
|
|
|
|
#endif /* notyet */
|
|
|
|
/* shorthands to compact tables for readability */
|
|
#define OFDM IEEE80211_T_OFDM
|
|
#define CCK IEEE80211_T_CCK
|
|
#define TURBO IEEE80211_T_TURBO
|
|
#define HALF IEEE80211_T_OFDM_HALF
|
|
#define QUART IEEE80211_T_OFDM_QUARTER
|
|
#define HT IEEE80211_T_HT
|
|
/* XXX the 11n and the basic rate flag are unfortunately overlapping. Grr. */
|
|
#define N(r) (IEEE80211_RATE_MCS | r)
|
|
#define PBCC (IEEE80211_T_OFDM_QUARTER+1) /* XXX */
|
|
#define B(r) (IEEE80211_RATE_BASIC | r)
|
|
#define Mb(x) (x*1000)
|
|
|
|
static struct ieee80211_rate_table ieee80211_11b_table = {
|
|
.rateCount = 4, /* XXX no PBCC */
|
|
.info = {
|
|
/* short ctrl */
|
|
/* Preamble dot11Rate Rate */
|
|
[0] = { .phy = CCK, 1000, 0x00, B(2), 0 },/* 1 Mb */
|
|
[1] = { .phy = CCK, 2000, 0x04, B(4), 1 },/* 2 Mb */
|
|
[2] = { .phy = CCK, 5500, 0x04, B(11), 1 },/* 5.5 Mb */
|
|
[3] = { .phy = CCK, 11000, 0x04, B(22), 1 },/* 11 Mb */
|
|
[4] = { .phy = PBCC, 22000, 0x04, 44, 3 } /* 22 Mb */
|
|
},
|
|
};
|
|
|
|
static struct ieee80211_rate_table ieee80211_11g_table = {
|
|
.rateCount = 12,
|
|
.info = {
|
|
/* short ctrl */
|
|
/* Preamble dot11Rate Rate */
|
|
[0] = { .phy = CCK, 1000, 0x00, B(2), 0 },
|
|
[1] = { .phy = CCK, 2000, 0x04, B(4), 1 },
|
|
[2] = { .phy = CCK, 5500, 0x04, B(11), 2 },
|
|
[3] = { .phy = CCK, 11000, 0x04, B(22), 3 },
|
|
[4] = { .phy = OFDM, 6000, 0x00, 12, 4 },
|
|
[5] = { .phy = OFDM, 9000, 0x00, 18, 4 },
|
|
[6] = { .phy = OFDM, 12000, 0x00, 24, 6 },
|
|
[7] = { .phy = OFDM, 18000, 0x00, 36, 6 },
|
|
[8] = { .phy = OFDM, 24000, 0x00, 48, 8 },
|
|
[9] = { .phy = OFDM, 36000, 0x00, 72, 8 },
|
|
[10] = { .phy = OFDM, 48000, 0x00, 96, 8 },
|
|
[11] = { .phy = OFDM, 54000, 0x00, 108, 8 }
|
|
},
|
|
};
|
|
|
|
static struct ieee80211_rate_table ieee80211_11a_table = {
|
|
.rateCount = 8,
|
|
.info = {
|
|
/* short ctrl */
|
|
/* Preamble dot11Rate Rate */
|
|
[0] = { .phy = OFDM, 6000, 0x00, B(12), 0 },
|
|
[1] = { .phy = OFDM, 9000, 0x00, 18, 0 },
|
|
[2] = { .phy = OFDM, 12000, 0x00, B(24), 2 },
|
|
[3] = { .phy = OFDM, 18000, 0x00, 36, 2 },
|
|
[4] = { .phy = OFDM, 24000, 0x00, B(48), 4 },
|
|
[5] = { .phy = OFDM, 36000, 0x00, 72, 4 },
|
|
[6] = { .phy = OFDM, 48000, 0x00, 96, 4 },
|
|
[7] = { .phy = OFDM, 54000, 0x00, 108, 4 }
|
|
},
|
|
};
|
|
|
|
static struct ieee80211_rate_table ieee80211_half_table = {
|
|
.rateCount = 8,
|
|
.info = {
|
|
/* short ctrl */
|
|
/* Preamble dot11Rate Rate */
|
|
[0] = { .phy = HALF, 3000, 0x00, B(6), 0 },
|
|
[1] = { .phy = HALF, 4500, 0x00, 9, 0 },
|
|
[2] = { .phy = HALF, 6000, 0x00, B(12), 2 },
|
|
[3] = { .phy = HALF, 9000, 0x00, 18, 2 },
|
|
[4] = { .phy = HALF, 12000, 0x00, B(24), 4 },
|
|
[5] = { .phy = HALF, 18000, 0x00, 36, 4 },
|
|
[6] = { .phy = HALF, 24000, 0x00, 48, 4 },
|
|
[7] = { .phy = HALF, 27000, 0x00, 54, 4 }
|
|
},
|
|
};
|
|
|
|
static struct ieee80211_rate_table ieee80211_quarter_table = {
|
|
.rateCount = 8,
|
|
.info = {
|
|
/* short ctrl */
|
|
/* Preamble dot11Rate Rate */
|
|
[0] = { .phy = QUART, 1500, 0x00, B(3), 0 },
|
|
[1] = { .phy = QUART, 2250, 0x00, 4, 0 },
|
|
[2] = { .phy = QUART, 3000, 0x00, B(9), 2 },
|
|
[3] = { .phy = QUART, 4500, 0x00, 9, 2 },
|
|
[4] = { .phy = QUART, 6000, 0x00, B(12), 4 },
|
|
[5] = { .phy = QUART, 9000, 0x00, 18, 4 },
|
|
[6] = { .phy = QUART, 12000, 0x00, 24, 4 },
|
|
[7] = { .phy = QUART, 13500, 0x00, 27, 4 }
|
|
},
|
|
};
|
|
|
|
static struct ieee80211_rate_table ieee80211_turbog_table = {
|
|
.rateCount = 7,
|
|
.info = {
|
|
/* short ctrl */
|
|
/* Preamble dot11Rate Rate */
|
|
[0] = { .phy = TURBO, 12000, 0x00, B(12), 0 },
|
|
[1] = { .phy = TURBO, 24000, 0x00, B(24), 1 },
|
|
[2] = { .phy = TURBO, 36000, 0x00, 36, 1 },
|
|
[3] = { .phy = TURBO, 48000, 0x00, B(48), 3 },
|
|
[4] = { .phy = TURBO, 72000, 0x00, 72, 3 },
|
|
[5] = { .phy = TURBO, 96000, 0x00, 96, 3 },
|
|
[6] = { .phy = TURBO, 108000, 0x00, 108, 3 }
|
|
},
|
|
};
|
|
|
|
static struct ieee80211_rate_table ieee80211_turboa_table = {
|
|
.rateCount = 8,
|
|
.info = {
|
|
/* short ctrl */
|
|
/* Preamble dot11Rate Rate */
|
|
[0] = { .phy = TURBO, 12000, 0x00, B(12), 0 },
|
|
[1] = { .phy = TURBO, 18000, 0x00, 18, 0 },
|
|
[2] = { .phy = TURBO, 24000, 0x00, B(24), 2 },
|
|
[3] = { .phy = TURBO, 36000, 0x00, 36, 2 },
|
|
[4] = { .phy = TURBO, 48000, 0x00, B(48), 4 },
|
|
[5] = { .phy = TURBO, 72000, 0x00, 72, 4 },
|
|
[6] = { .phy = TURBO, 96000, 0x00, 96, 4 },
|
|
[7] = { .phy = TURBO, 108000, 0x00, 108, 4 }
|
|
},
|
|
};
|
|
|
|
static struct ieee80211_rate_table ieee80211_11ng_table = {
|
|
.rateCount = 36,
|
|
.info = {
|
|
/* short ctrl */
|
|
/* Preamble dot11Rate Rate */
|
|
[0] = { .phy = CCK, 1000, 0x00, B(2), 0 },
|
|
[1] = { .phy = CCK, 2000, 0x04, B(4), 1 },
|
|
[2] = { .phy = CCK, 5500, 0x04, B(11), 2 },
|
|
[3] = { .phy = CCK, 11000, 0x04, B(22), 3 },
|
|
[4] = { .phy = OFDM, 6000, 0x00, 12, 4 },
|
|
[5] = { .phy = OFDM, 9000, 0x00, 18, 4 },
|
|
[6] = { .phy = OFDM, 12000, 0x00, 24, 6 },
|
|
[7] = { .phy = OFDM, 18000, 0x00, 36, 6 },
|
|
[8] = { .phy = OFDM, 24000, 0x00, 48, 8 },
|
|
[9] = { .phy = OFDM, 36000, 0x00, 72, 8 },
|
|
[10] = { .phy = OFDM, 48000, 0x00, 96, 8 },
|
|
[11] = { .phy = OFDM, 54000, 0x00, 108, 8 },
|
|
|
|
[12] = { .phy = HT, 6500, 0x00, N(0), 4 },
|
|
[13] = { .phy = HT, 13000, 0x00, N(1), 6 },
|
|
[14] = { .phy = HT, 19500, 0x00, N(2), 6 },
|
|
[15] = { .phy = HT, 26000, 0x00, N(3), 8 },
|
|
[16] = { .phy = HT, 39000, 0x00, N(4), 8 },
|
|
[17] = { .phy = HT, 52000, 0x00, N(5), 8 },
|
|
[18] = { .phy = HT, 58500, 0x00, N(6), 8 },
|
|
[19] = { .phy = HT, 65000, 0x00, N(7), 8 },
|
|
|
|
[20] = { .phy = HT, 13000, 0x00, N(8), 4 },
|
|
[21] = { .phy = HT, 26000, 0x00, N(9), 6 },
|
|
[22] = { .phy = HT, 39000, 0x00, N(10), 6 },
|
|
[23] = { .phy = HT, 52000, 0x00, N(11), 8 },
|
|
[24] = { .phy = HT, 78000, 0x00, N(12), 8 },
|
|
[25] = { .phy = HT, 104000, 0x00, N(13), 8 },
|
|
[26] = { .phy = HT, 117000, 0x00, N(14), 8 },
|
|
[27] = { .phy = HT, 130000, 0x00, N(15), 8 },
|
|
|
|
[28] = { .phy = HT, 19500, 0x00, N(16), 4 },
|
|
[29] = { .phy = HT, 39000, 0x00, N(17), 6 },
|
|
[30] = { .phy = HT, 58500, 0x00, N(18), 6 },
|
|
[31] = { .phy = HT, 78000, 0x00, N(19), 8 },
|
|
[32] = { .phy = HT, 117000, 0x00, N(20), 8 },
|
|
[33] = { .phy = HT, 156000, 0x00, N(21), 8 },
|
|
[34] = { .phy = HT, 175500, 0x00, N(22), 8 },
|
|
[35] = { .phy = HT, 195000, 0x00, N(23), 8 },
|
|
|
|
},
|
|
};
|
|
|
|
static struct ieee80211_rate_table ieee80211_11na_table = {
|
|
.rateCount = 32,
|
|
.info = {
|
|
/* short ctrl */
|
|
/* Preamble dot11Rate Rate */
|
|
[0] = { .phy = OFDM, 6000, 0x00, B(12), 0 },
|
|
[1] = { .phy = OFDM, 9000, 0x00, 18, 0 },
|
|
[2] = { .phy = OFDM, 12000, 0x00, B(24), 2 },
|
|
[3] = { .phy = OFDM, 18000, 0x00, 36, 2 },
|
|
[4] = { .phy = OFDM, 24000, 0x00, B(48), 4 },
|
|
[5] = { .phy = OFDM, 36000, 0x00, 72, 4 },
|
|
[6] = { .phy = OFDM, 48000, 0x00, 96, 4 },
|
|
[7] = { .phy = OFDM, 54000, 0x00, 108, 4 },
|
|
|
|
[8] = { .phy = HT, 6500, 0x00, N(0), 0 },
|
|
[9] = { .phy = HT, 13000, 0x00, N(1), 2 },
|
|
[10] = { .phy = HT, 19500, 0x00, N(2), 2 },
|
|
[11] = { .phy = HT, 26000, 0x00, N(3), 4 },
|
|
[12] = { .phy = HT, 39000, 0x00, N(4), 4 },
|
|
[13] = { .phy = HT, 52000, 0x00, N(5), 4 },
|
|
[14] = { .phy = HT, 58500, 0x00, N(6), 4 },
|
|
[15] = { .phy = HT, 65000, 0x00, N(7), 4 },
|
|
|
|
[16] = { .phy = HT, 13000, 0x00, N(8), 0 },
|
|
[17] = { .phy = HT, 26000, 0x00, N(9), 2 },
|
|
[18] = { .phy = HT, 39000, 0x00, N(10), 2 },
|
|
[19] = { .phy = HT, 52000, 0x00, N(11), 4 },
|
|
[20] = { .phy = HT, 78000, 0x00, N(12), 4 },
|
|
[21] = { .phy = HT, 104000, 0x00, N(13), 4 },
|
|
[22] = { .phy = HT, 117000, 0x00, N(14), 4 },
|
|
[23] = { .phy = HT, 130000, 0x00, N(15), 4 },
|
|
|
|
[24] = { .phy = HT, 19500, 0x00, N(16), 0 },
|
|
[25] = { .phy = HT, 39000, 0x00, N(17), 2 },
|
|
[26] = { .phy = HT, 58500, 0x00, N(18), 2 },
|
|
[27] = { .phy = HT, 78000, 0x00, N(19), 4 },
|
|
[28] = { .phy = HT, 117000, 0x00, N(20), 4 },
|
|
[29] = { .phy = HT, 156000, 0x00, N(21), 4 },
|
|
[30] = { .phy = HT, 175500, 0x00, N(22), 4 },
|
|
[31] = { .phy = HT, 195000, 0x00, N(23), 4 },
|
|
|
|
},
|
|
};
|
|
|
|
#undef Mb
|
|
#undef B
|
|
#undef OFDM
|
|
#undef HALF
|
|
#undef QUART
|
|
#undef CCK
|
|
#undef TURBO
|
|
#undef XR
|
|
#undef HT
|
|
#undef N
|
|
|
|
/*
|
|
* Setup a rate table's reverse lookup table and fill in
|
|
* ack durations. The reverse lookup tables are assumed
|
|
* to be initialized to zero (or at least the first entry).
|
|
* We use this as a key that indicates whether or not
|
|
* we've previously setup the reverse lookup table.
|
|
*
|
|
* XXX not reentrant, but shouldn't matter
|
|
*/
|
|
static void
|
|
ieee80211_setup_ratetable(struct ieee80211_rate_table *rt)
|
|
{
|
|
#define WLAN_CTRL_FRAME_SIZE \
|
|
(sizeof(struct ieee80211_frame_ack) + IEEE80211_CRC_LEN)
|
|
|
|
int i;
|
|
|
|
for (i = 0; i < nitems(rt->rateCodeToIndex); i++)
|
|
rt->rateCodeToIndex[i] = (uint8_t) -1;
|
|
for (i = 0; i < rt->rateCount; i++) {
|
|
uint8_t code = rt->info[i].dot11Rate;
|
|
uint8_t cix = rt->info[i].ctlRateIndex;
|
|
uint8_t ctl_rate = rt->info[cix].dot11Rate;
|
|
|
|
/*
|
|
* Map without the basic rate bit.
|
|
*
|
|
* It's up to the caller to ensure that the basic
|
|
* rate bit is stripped here.
|
|
*
|
|
* For HT, use the MCS rate bit.
|
|
*/
|
|
code &= IEEE80211_RATE_VAL;
|
|
if (rt->info[i].phy == IEEE80211_T_HT) {
|
|
code |= IEEE80211_RATE_MCS;
|
|
}
|
|
|
|
/* XXX assume the control rate is non-MCS? */
|
|
ctl_rate &= IEEE80211_RATE_VAL;
|
|
rt->rateCodeToIndex[code] = i;
|
|
|
|
/*
|
|
* XXX for 11g the control rate to use for 5.5 and 11 Mb/s
|
|
* depends on whether they are marked as basic rates;
|
|
* the static tables are setup with an 11b-compatible
|
|
* 2Mb/s rate which will work but is suboptimal
|
|
*
|
|
* NB: Control rate is always less than or equal to the
|
|
* current rate, so control rate's reverse lookup entry
|
|
* has been installed and following call is safe.
|
|
*/
|
|
rt->info[i].lpAckDuration = ieee80211_compute_duration(rt,
|
|
WLAN_CTRL_FRAME_SIZE, ctl_rate, 0);
|
|
rt->info[i].spAckDuration = ieee80211_compute_duration(rt,
|
|
WLAN_CTRL_FRAME_SIZE, ctl_rate, IEEE80211_F_SHPREAMBLE);
|
|
}
|
|
|
|
#undef WLAN_CTRL_FRAME_SIZE
|
|
}
|
|
|
|
/* Setup all rate tables */
|
|
static void
|
|
ieee80211_phy_init(void)
|
|
{
|
|
static struct ieee80211_rate_table * const ratetables[] = {
|
|
&ieee80211_half_table,
|
|
&ieee80211_quarter_table,
|
|
&ieee80211_11na_table,
|
|
&ieee80211_11ng_table,
|
|
&ieee80211_turbog_table,
|
|
&ieee80211_turboa_table,
|
|
&ieee80211_11a_table,
|
|
&ieee80211_11g_table,
|
|
&ieee80211_11b_table
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < nitems(ratetables); ++i)
|
|
ieee80211_setup_ratetable(ratetables[i]);
|
|
|
|
}
|
|
SYSINIT(wlan_phy, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_phy_init, NULL);
|
|
|
|
const struct ieee80211_rate_table *
|
|
ieee80211_get_ratetable(struct ieee80211_channel *c)
|
|
{
|
|
const struct ieee80211_rate_table *rt;
|
|
|
|
/* XXX HT */
|
|
if (IEEE80211_IS_CHAN_HALF(c))
|
|
rt = &ieee80211_half_table;
|
|
else if (IEEE80211_IS_CHAN_QUARTER(c))
|
|
rt = &ieee80211_quarter_table;
|
|
else if (IEEE80211_IS_CHAN_HTA(c))
|
|
rt = &ieee80211_11na_table;
|
|
else if (IEEE80211_IS_CHAN_HTG(c))
|
|
rt = &ieee80211_11ng_table;
|
|
else if (IEEE80211_IS_CHAN_108G(c))
|
|
rt = &ieee80211_turbog_table;
|
|
else if (IEEE80211_IS_CHAN_ST(c))
|
|
rt = &ieee80211_turboa_table;
|
|
else if (IEEE80211_IS_CHAN_TURBO(c))
|
|
rt = &ieee80211_turboa_table;
|
|
else if (IEEE80211_IS_CHAN_A(c))
|
|
rt = &ieee80211_11a_table;
|
|
else if (IEEE80211_IS_CHAN_ANYG(c))
|
|
rt = &ieee80211_11g_table;
|
|
else if (IEEE80211_IS_CHAN_B(c))
|
|
rt = &ieee80211_11b_table;
|
|
else {
|
|
/* NB: should not get here */
|
|
panic("%s: no rate table for channel; freq %u flags 0x%x\n",
|
|
__func__, c->ic_freq, c->ic_flags);
|
|
}
|
|
return rt;
|
|
}
|
|
|
|
/*
|
|
* Convert PLCP signal/rate field to 802.11 rate (.5Mbits/s)
|
|
*
|
|
* Note we do no parameter checking; this routine is mainly
|
|
* used to derive an 802.11 rate for constructing radiotap
|
|
* header data for rx frames.
|
|
*
|
|
* XXX might be a candidate for inline
|
|
*/
|
|
uint8_t
|
|
ieee80211_plcp2rate(uint8_t plcp, enum ieee80211_phytype type)
|
|
{
|
|
if (type == IEEE80211_T_OFDM) {
|
|
static const uint8_t ofdm_plcp2rate[16] = {
|
|
[0xb] = 12,
|
|
[0xf] = 18,
|
|
[0xa] = 24,
|
|
[0xe] = 36,
|
|
[0x9] = 48,
|
|
[0xd] = 72,
|
|
[0x8] = 96,
|
|
[0xc] = 108
|
|
};
|
|
return ofdm_plcp2rate[plcp & 0xf];
|
|
}
|
|
if (type == IEEE80211_T_CCK) {
|
|
static const uint8_t cck_plcp2rate[16] = {
|
|
[0xa] = 2, /* 0x0a */
|
|
[0x4] = 4, /* 0x14 */
|
|
[0x7] = 11, /* 0x37 */
|
|
[0xe] = 22, /* 0x6e */
|
|
[0xc] = 44, /* 0xdc , actually PBCC */
|
|
};
|
|
return cck_plcp2rate[plcp & 0xf];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Covert 802.11 rate to PLCP signal.
|
|
*/
|
|
uint8_t
|
|
ieee80211_rate2plcp(int rate, enum ieee80211_phytype type)
|
|
{
|
|
/* XXX ignore type for now since rates are unique */
|
|
switch (rate) {
|
|
/* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
|
|
case 12: return 0xb;
|
|
case 18: return 0xf;
|
|
case 24: return 0xa;
|
|
case 36: return 0xe;
|
|
case 48: return 0x9;
|
|
case 72: return 0xd;
|
|
case 96: return 0x8;
|
|
case 108: return 0xc;
|
|
/* CCK rates (IEEE Std 802.11b-1999 page 15, subclause 18.2.3.3) */
|
|
case 2: return 10;
|
|
case 4: return 20;
|
|
case 11: return 55;
|
|
case 22: return 110;
|
|
/* IEEE Std 802.11g-2003 page 19, subclause 19.3.2.1 */
|
|
case 44: return 220;
|
|
}
|
|
return 0; /* XXX unsupported/unknown rate */
|
|
}
|
|
|
|
#define CCK_SIFS_TIME 10
|
|
#define CCK_PREAMBLE_BITS 144
|
|
#define CCK_PLCP_BITS 48
|
|
|
|
#define OFDM_SIFS_TIME 16
|
|
#define OFDM_PREAMBLE_TIME 20
|
|
#define OFDM_PLCP_BITS 22
|
|
#define OFDM_SYMBOL_TIME 4
|
|
|
|
#define OFDM_HALF_SIFS_TIME 32
|
|
#define OFDM_HALF_PREAMBLE_TIME 40
|
|
#define OFDM_HALF_PLCP_BITS 22
|
|
#define OFDM_HALF_SYMBOL_TIME 8
|
|
|
|
#define OFDM_QUARTER_SIFS_TIME 64
|
|
#define OFDM_QUARTER_PREAMBLE_TIME 80
|
|
#define OFDM_QUARTER_PLCP_BITS 22
|
|
#define OFDM_QUARTER_SYMBOL_TIME 16
|
|
|
|
#define TURBO_SIFS_TIME 8
|
|
#define TURBO_PREAMBLE_TIME 14
|
|
#define TURBO_PLCP_BITS 22
|
|
#define TURBO_SYMBOL_TIME 4
|
|
|
|
/*
|
|
* Compute the time to transmit a frame of length frameLen bytes
|
|
* using the specified rate, phy, and short preamble setting.
|
|
* SIFS is included.
|
|
*/
|
|
uint16_t
|
|
ieee80211_compute_duration(const struct ieee80211_rate_table *rt,
|
|
uint32_t frameLen, uint16_t rate, int isShortPreamble)
|
|
{
|
|
uint8_t rix = rt->rateCodeToIndex[rate];
|
|
uint32_t bitsPerSymbol, numBits, numSymbols, phyTime, txTime;
|
|
uint32_t kbps;
|
|
|
|
KASSERT(rix != (uint8_t)-1, ("rate %d has no info", rate));
|
|
kbps = rt->info[rix].rateKbps;
|
|
if (kbps == 0) /* XXX bandaid for channel changes */
|
|
return 0;
|
|
|
|
switch (rt->info[rix].phy) {
|
|
case IEEE80211_T_CCK:
|
|
phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS;
|
|
if (isShortPreamble && rt->info[rix].shortPreamble)
|
|
phyTime >>= 1;
|
|
numBits = frameLen << 3;
|
|
txTime = CCK_SIFS_TIME + phyTime
|
|
+ ((numBits * 1000)/kbps);
|
|
break;
|
|
case IEEE80211_T_OFDM:
|
|
bitsPerSymbol = (kbps * OFDM_SYMBOL_TIME) / 1000;
|
|
KASSERT(bitsPerSymbol != 0, ("full rate bps"));
|
|
|
|
numBits = OFDM_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
txTime = OFDM_SIFS_TIME
|
|
+ OFDM_PREAMBLE_TIME
|
|
+ (numSymbols * OFDM_SYMBOL_TIME);
|
|
break;
|
|
case IEEE80211_T_OFDM_HALF:
|
|
bitsPerSymbol = (kbps * OFDM_HALF_SYMBOL_TIME) / 1000;
|
|
KASSERT(bitsPerSymbol != 0, ("1/4 rate bps"));
|
|
|
|
numBits = OFDM_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
txTime = OFDM_HALF_SIFS_TIME
|
|
+ OFDM_HALF_PREAMBLE_TIME
|
|
+ (numSymbols * OFDM_HALF_SYMBOL_TIME);
|
|
break;
|
|
case IEEE80211_T_OFDM_QUARTER:
|
|
bitsPerSymbol = (kbps * OFDM_QUARTER_SYMBOL_TIME) / 1000;
|
|
KASSERT(bitsPerSymbol != 0, ("1/2 rate bps"));
|
|
|
|
numBits = OFDM_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
txTime = OFDM_QUARTER_SIFS_TIME
|
|
+ OFDM_QUARTER_PREAMBLE_TIME
|
|
+ (numSymbols * OFDM_QUARTER_SYMBOL_TIME);
|
|
break;
|
|
case IEEE80211_T_TURBO:
|
|
/* we still save OFDM rates in kbps - so double them */
|
|
bitsPerSymbol = ((kbps << 1) * TURBO_SYMBOL_TIME) / 1000;
|
|
KASSERT(bitsPerSymbol != 0, ("turbo bps"));
|
|
|
|
numBits = TURBO_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
txTime = TURBO_SIFS_TIME + TURBO_PREAMBLE_TIME
|
|
+ (numSymbols * TURBO_SYMBOL_TIME);
|
|
break;
|
|
default:
|
|
panic("%s: unknown phy %u (rate %u)\n", __func__,
|
|
rt->info[rix].phy, rate);
|
|
}
|
|
return txTime;
|
|
}
|
|
|
|
static const uint16_t ht20_bps[32] = {
|
|
26, 52, 78, 104, 156, 208, 234, 260,
|
|
52, 104, 156, 208, 312, 416, 468, 520,
|
|
78, 156, 234, 312, 468, 624, 702, 780,
|
|
104, 208, 312, 416, 624, 832, 936, 1040
|
|
};
|
|
static const uint16_t ht40_bps[32] = {
|
|
54, 108, 162, 216, 324, 432, 486, 540,
|
|
108, 216, 324, 432, 648, 864, 972, 1080,
|
|
162, 324, 486, 648, 972, 1296, 1458, 1620,
|
|
216, 432, 648, 864, 1296, 1728, 1944, 2160
|
|
};
|
|
|
|
#define OFDM_PLCP_BITS 22
|
|
#define HT_L_STF 8
|
|
#define HT_L_LTF 8
|
|
#define HT_L_SIG 4
|
|
#define HT_SIG 8
|
|
#define HT_STF 4
|
|
#define HT_LTF(n) ((n) * 4)
|
|
|
|
/*
|
|
* Calculate the transmit duration of an 11n frame.
|
|
*/
|
|
uint32_t
|
|
ieee80211_compute_duration_ht(uint32_t frameLen, uint16_t rate,
|
|
int streams, int isht40, int isShortGI)
|
|
{
|
|
uint32_t bitsPerSymbol, numBits, numSymbols, txTime;
|
|
|
|
KASSERT(rate & IEEE80211_RATE_MCS, ("not mcs %d", rate));
|
|
KASSERT((rate &~ IEEE80211_RATE_MCS) < 31, ("bad mcs 0x%x", rate));
|
|
|
|
if (isht40)
|
|
bitsPerSymbol = ht40_bps[rate & 0x1f];
|
|
else
|
|
bitsPerSymbol = ht20_bps[rate & 0x1f];
|
|
numBits = OFDM_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
if (isShortGI)
|
|
txTime = ((numSymbols * 18) + 4) / 5; /* 3.6us */
|
|
else
|
|
txTime = numSymbols * 4; /* 4us */
|
|
return txTime + HT_L_STF + HT_L_LTF +
|
|
HT_L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
|
|
}
|
|
|
|
#undef HT_LTF
|
|
#undef HT_STF
|
|
#undef HT_SIG
|
|
#undef HT_L_SIG
|
|
#undef HT_L_LTF
|
|
#undef HT_L_STF
|
|
#undef OFDM_PLCP_BITS
|