d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f8ecc40737
freebsd-dev/sys/net80211/ieee80211_ioctl.h
Sam Leffler 8658b18b82 Remove assumptions about the max # channels in ioctl's: 
o change ioctl's that pass channel lists in/out to handle variable-size
  arrays instead of a fixed (compile-time) value; we do this in a way
  that maintains binary compatibility
o change ifconfig so all channel list data structures are now allocated
  to hold MAXCHAN entries (1536); this, for example, allows the kernel
  to return > IEEE80211_CHAN_MAX entries for calls like IEEE80211_IOC_DEVCAPS
2009-01-27 23:42:14 +00:00

766 lines
33 KiB
C
Raw Blame History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_IOCTL_H_
#define _NET80211_IEEE80211_IOCTL_H_
/*
* IEEE 802.11 ioctls.
*/
#include <net80211/_ieee80211.h>
#include <net80211/ieee80211.h>
#include <net80211/ieee80211_crypto.h>
/*
* Per/node (station) statistics.
*/
struct ieee80211_nodestats {
uint32_t ns_rx_data; /* rx data frames */
uint32_t ns_rx_mgmt; /* rx management frames */
uint32_t ns_rx_ctrl; /* rx control frames */
uint32_t ns_rx_ucast; /* rx unicast frames */
uint32_t ns_rx_mcast; /* rx multi/broadcast frames */
uint64_t ns_rx_bytes; /* rx data count (bytes) */
uint64_t ns_rx_beacons; /* rx beacon frames */
uint32_t ns_rx_proberesp; /* rx probe response frames */
uint32_t ns_rx_dup; /* rx discard 'cuz dup */
uint32_t ns_rx_noprivacy; /* rx w/ wep but privacy off */
uint32_t ns_rx_wepfail; /* rx wep processing failed */
uint32_t ns_rx_demicfail; /* rx demic failed */
uint32_t ns_rx_decap; /* rx decapsulation failed */
uint32_t ns_rx_defrag; /* rx defragmentation failed */
uint32_t ns_rx_disassoc; /* rx disassociation */
uint32_t ns_rx_deauth; /* rx deauthentication */
uint32_t ns_rx_action; /* rx action */
uint32_t ns_rx_decryptcrc; /* rx decrypt failed on crc */
uint32_t ns_rx_unauth; /* rx on unauthorized port */
uint32_t ns_rx_unencrypted; /* rx unecrypted w/ privacy */
uint32_t ns_rx_drop; /* rx discard other reason */
uint32_t ns_tx_data; /* tx data frames */
uint32_t ns_tx_mgmt; /* tx management frames */
uint32_t ns_tx_ucast; /* tx unicast frames */
uint32_t ns_tx_mcast; /* tx multi/broadcast frames */
uint64_t ns_tx_bytes; /* tx data count (bytes) */
uint32_t ns_tx_probereq; /* tx probe request frames */
uint32_t ns_tx_novlantag; /* tx discard 'cuz no tag */
uint32_t ns_tx_vlanmismatch; /* tx discard 'cuz bad tag */
uint32_t ns_ps_discard; /* ps discard 'cuz of age */
/* MIB-related state */
uint32_t ns_tx_assoc; /* [re]associations */
uint32_t ns_tx_assoc_fail; /* [re]association failures */
uint32_t ns_tx_auth; /* [re]authentications */
uint32_t ns_tx_auth_fail; /* [re]authentication failures*/
uint32_t ns_tx_deauth; /* deauthentications */
uint32_t ns_tx_deauth_code; /* last deauth reason */
uint32_t ns_tx_disassoc; /* disassociations */
uint32_t ns_tx_disassoc_code; /* last disassociation reason */
};
/*
* Summary statistics.
*/
struct ieee80211_stats {
uint32_t is_rx_badversion; /* rx frame with bad version */
uint32_t is_rx_tooshort; /* rx frame too short */
uint32_t is_rx_wrongbss; /* rx from wrong bssid */
uint32_t is_rx_dup; /* rx discard 'cuz dup */
uint32_t is_rx_wrongdir; /* rx w/ wrong direction */
uint32_t is_rx_mcastecho; /* rx discard 'cuz mcast echo */
uint32_t is_rx_notassoc; /* rx discard 'cuz sta !assoc */
uint32_t is_rx_noprivacy; /* rx w/ wep but privacy off */
uint32_t is_rx_unencrypted; /* rx w/o wep and privacy on */
uint32_t is_rx_wepfail; /* rx wep processing failed */
uint32_t is_rx_decap; /* rx decapsulation failed */
uint32_t is_rx_mgtdiscard; /* rx discard mgt frames */
uint32_t is_rx_ctl; /* rx discard ctrl frames */
uint32_t is_rx_beacon; /* rx beacon frames */
uint32_t is_rx_rstoobig; /* rx rate set truncated */
uint32_t is_rx_elem_missing; /* rx required element missing*/
uint32_t is_rx_elem_toobig; /* rx element too big */
uint32_t is_rx_elem_toosmall; /* rx element too small */
uint32_t is_rx_elem_unknown; /* rx element unknown */
uint32_t is_rx_badchan; /* rx frame w/ invalid chan */
uint32_t is_rx_chanmismatch; /* rx frame chan mismatch */
uint32_t is_rx_nodealloc; /* rx frame dropped */
uint32_t is_rx_ssidmismatch; /* rx frame ssid mismatch */
uint32_t is_rx_auth_unsupported; /* rx w/ unsupported auth alg */
uint32_t is_rx_auth_fail; /* rx sta auth failure */
uint32_t is_rx_auth_countermeasures;/* rx auth discard 'cuz CM */
uint32_t is_rx_assoc_bss; /* rx assoc from wrong bssid */
uint32_t is_rx_assoc_notauth; /* rx assoc w/o auth */
uint32_t is_rx_assoc_capmismatch;/* rx assoc w/ cap mismatch */
uint32_t is_rx_assoc_norate; /* rx assoc w/ no rate match */
uint32_t is_rx_assoc_badwpaie; /* rx assoc w/ bad WPA IE */
uint32_t is_rx_deauth; /* rx deauthentication */
uint32_t is_rx_disassoc; /* rx disassociation */
uint32_t is_rx_badsubtype; /* rx frame w/ unknown subtype*/
uint32_t is_rx_nobuf; /* rx failed for lack of buf */
uint32_t is_rx_decryptcrc; /* rx decrypt failed on crc */
uint32_t is_rx_ahdemo_mgt; /* rx discard ahdemo mgt frame*/
uint32_t is_rx_bad_auth; /* rx bad auth request */
uint32_t is_rx_unauth; /* rx on unauthorized port */
uint32_t is_rx_badkeyid; /* rx w/ incorrect keyid */
uint32_t is_rx_ccmpreplay; /* rx seq# violation (CCMP) */
uint32_t is_rx_ccmpformat; /* rx format bad (CCMP) */
uint32_t is_rx_ccmpmic; /* rx MIC check failed (CCMP) */
uint32_t is_rx_tkipreplay; /* rx seq# violation (TKIP) */
uint32_t is_rx_tkipformat; /* rx format bad (TKIP) */
uint32_t is_rx_tkipmic; /* rx MIC check failed (TKIP) */
uint32_t is_rx_tkipicv; /* rx ICV check failed (TKIP) */
uint32_t is_rx_badcipher; /* rx failed 'cuz key type */
uint32_t is_rx_nocipherctx; /* rx failed 'cuz key !setup */
uint32_t is_rx_acl; /* rx discard 'cuz acl policy */
uint32_t is_tx_nobuf; /* tx failed for lack of buf */
uint32_t is_tx_nonode; /* tx failed for no node */
uint32_t is_tx_unknownmgt; /* tx of unknown mgt frame */
uint32_t is_tx_badcipher; /* tx failed 'cuz key type */
uint32_t is_tx_nodefkey; /* tx failed 'cuz no defkey */
uint32_t is_tx_noheadroom; /* tx failed 'cuz no space */
uint32_t is_tx_fragframes; /* tx frames fragmented */
uint32_t is_tx_frags; /* tx fragments created */
uint32_t is_scan_active; /* active scans started */
uint32_t is_scan_passive; /* passive scans started */
uint32_t is_node_timeout; /* nodes timed out inactivity */
uint32_t is_crypto_nomem; /* no memory for crypto ctx */
uint32_t is_crypto_tkip; /* tkip crypto done in s/w */
uint32_t is_crypto_tkipenmic; /* tkip en-MIC done in s/w */
uint32_t is_crypto_tkipdemic; /* tkip de-MIC done in s/w */
uint32_t is_crypto_tkipcm; /* tkip counter measures */
uint32_t is_crypto_ccmp; /* ccmp crypto done in s/w */
uint32_t is_crypto_wep; /* wep crypto done in s/w */
uint32_t is_crypto_setkey_cipher;/* cipher rejected key */
uint32_t is_crypto_setkey_nokey; /* no key index for setkey */
uint32_t is_crypto_delkey; /* driver key delete failed */
uint32_t is_crypto_badcipher; /* unknown cipher */
uint32_t is_crypto_nocipher; /* cipher not available */
uint32_t is_crypto_attachfail; /* cipher attach failed */
uint32_t is_crypto_swfallback; /* cipher fallback to s/w */
uint32_t is_crypto_keyfail; /* driver key alloc failed */
uint32_t is_crypto_enmicfail; /* en-MIC failed */
uint32_t is_ibss_capmismatch; /* merge failed-cap mismatch */
uint32_t is_ibss_norate; /* merge failed-rate mismatch */
uint32_t is_ps_unassoc; /* ps-poll for unassoc. sta */
uint32_t is_ps_badaid; /* ps-poll w/ incorrect aid */
uint32_t is_ps_qempty; /* ps-poll w/ nothing to send */
uint32_t is_ff_badhdr; /* fast frame rx'd w/ bad hdr */
uint32_t is_ff_tooshort; /* fast frame rx decap error */
uint32_t is_ff_split; /* fast frame rx split error */
uint32_t is_ff_decap; /* fast frames decap'd */
uint32_t is_ff_encap; /* fast frames encap'd for tx */
uint32_t is_rx_badbintval; /* rx frame w/ bogus bintval */
uint32_t is_rx_demicfail; /* rx demic failed */
uint32_t is_rx_defrag; /* rx defragmentation failed */
uint32_t is_rx_mgmt; /* rx management frames */
uint32_t is_rx_action; /* rx action mgt frames */
uint32_t is_amsdu_tooshort; /* A-MSDU rx decap error */
uint32_t is_amsdu_split; /* A-MSDU rx split error */
uint32_t is_amsdu_decap; /* A-MSDU decap'd */
uint32_t is_amsdu_encap; /* A-MSDU encap'd for tx */
uint32_t is_ampdu_bar_bad; /* A-MPDU BAR out of window */
uint32_t is_ampdu_bar_oow; /* A-MPDU BAR before ADDBA */
uint32_t is_ampdu_bar_move; /* A-MPDU BAR moved window */
uint32_t is_ampdu_bar_rx; /* A-MPDU BAR frames handled */
uint32_t is_ampdu_rx_flush; /* A-MPDU frames flushed */
uint32_t is_ampdu_rx_oor; /* A-MPDU frames out-of-order */
uint32_t is_ampdu_rx_copy; /* A-MPDU frames copied down */
uint32_t is_ampdu_rx_drop; /* A-MPDU frames dropped */
uint32_t is_tx_badstate; /* tx discard state != RUN */
uint32_t is_tx_notassoc; /* tx failed, sta not assoc */
uint32_t is_tx_classify; /* tx classification failed */
uint32_t is_dwds_mcast; /* discard mcast over dwds */
uint32_t is_dwds_qdrop; /* dwds pending frame q full */
uint32_t is_ht_assoc_nohtcap; /* non-HT sta rejected */
uint32_t is_ht_assoc_downgrade; /* HT sta forced to legacy */
uint32_t is_ht_assoc_norate; /* HT assoc w/ rate mismatch */
uint32_t is_ampdu_rx_age; /* A-MPDU sent up 'cuz of age */
uint32_t is_ampdu_rx_move; /* A-MPDU MSDU moved window */
uint32_t is_addba_reject; /* ADDBA reject 'cuz disabled */
uint32_t is_addba_norequest; /* ADDBA response w/o ADDBA */
uint32_t is_addba_badtoken; /* ADDBA response w/ wrong
dialogtoken */
uint32_t is_addba_badpolicy; /* ADDBA resp w/ wrong policy */
uint32_t is_ampdu_stop; /* A-MPDU stream stopped */
uint32_t is_ampdu_stop_failed; /* A-MPDU stream not running */
uint32_t is_ampdu_rx_reorder; /* A-MPDU held for rx reorder */
uint32_t is_scan_bg; /* background scans started */
uint8_t is_rx_deauth_code; /* last rx'd deauth reason */
uint8_t is_rx_disassoc_code; /* last rx'd disassoc reason */
uint8_t is_rx_authfail_code; /* last rx'd auth fail reason */
uint32_t is_beacon_miss; /* beacon miss notification */
uint32_t is_rx_badstate; /* rx discard state != RUN */
uint32_t is_spare[12];
};
/*
* Max size of optional information elements. We artificially
* constrain this; it's limited only by the max frame size (and
* the max parameter size of the wireless extensions).
*/
#define IEEE80211_MAX_OPT_IE 256
/*
* WPA/RSN get/set key request. Specify the key/cipher
* type and whether the key is to be used for sending and/or
* receiving. The key index should be set only when working
* with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
* Otherwise a unicast/pairwise key is specified by the bssid
* (on a station) or mac address (on an ap). They key length
* must include any MIC key data; otherwise it should be no
* more than IEEE80211_KEYBUF_SIZE.
*/
struct ieee80211req_key {
uint8_t ik_type; /* key/cipher type */
uint8_t ik_pad;
uint16_t ik_keyix; /* key index */
uint8_t ik_keylen; /* key length in bytes */
uint8_t ik_flags;
/* NB: IEEE80211_KEY_XMIT and IEEE80211_KEY_RECV defined elsewhere */
#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */
uint8_t ik_macaddr[IEEE80211_ADDR_LEN];
uint64_t ik_keyrsc; /* key receive sequence counter */
uint64_t ik_keytsc; /* key transmit sequence counter */
uint8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
};
/*
* Delete a key either by index or address. Set the index
* to IEEE80211_KEYIX_NONE when deleting a unicast key.
*/
struct ieee80211req_del_key {
uint8_t idk_keyix; /* key index */
uint8_t idk_macaddr[IEEE80211_ADDR_LEN];
};
/*
* MLME state manipulation request. IEEE80211_MLME_ASSOC
* only makes sense when operating as a station. The other
* requests can be used when operating as a station or an
* ap (to effect a station).
*/
struct ieee80211req_mlme {
uint8_t im_op; /* operation to perform */
#define IEEE80211_MLME_ASSOC 1 /* associate station */
#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */
#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */
#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */
#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */
#define IEEE80211_MLME_AUTH 6 /* authenticate station */
uint8_t im_ssid_len; /* length of optional ssid */
uint16_t im_reason; /* 802.11 reason code */
uint8_t im_macaddr[IEEE80211_ADDR_LEN];
uint8_t im_ssid[IEEE80211_NWID_LEN];
};
/*
* MAC ACL operations.
*/
enum {
IEEE80211_MACCMD_POLICY_OPEN = 0, /* set policy: no ACL's */
IEEE80211_MACCMD_POLICY_ALLOW = 1, /* set policy: allow traffic */
IEEE80211_MACCMD_POLICY_DENY = 2, /* set policy: deny traffic */
IEEE80211_MACCMD_FLUSH = 3, /* flush ACL database */
IEEE80211_MACCMD_DETACH = 4, /* detach ACL policy */
IEEE80211_MACCMD_POLICY = 5, /* get ACL policy */
IEEE80211_MACCMD_LIST = 6, /* get ACL database */
IEEE80211_MACCMD_POLICY_RADIUS = 7, /* set policy: RADIUS managed */
};
struct ieee80211req_maclist {
uint8_t ml_macaddr[IEEE80211_ADDR_LEN];
};
/*
* Set the active channel list by IEEE channel #: each channel
* to be marked active is set in a bit vector. Note this list is
* intersected with the available channel list in calculating
* the set of channels actually used in scanning.
*/
struct ieee80211req_chanlist {
uint8_t ic_channels[32]; /* NB: can be variable length */
};
/*
* Get the active channel list info.
*/
struct ieee80211req_chaninfo {
u_int ic_nchans;
struct ieee80211_channel ic_chans[1]; /* NB: variable length */
};
#define IEEE80211_CHANINFO_SIZE(_nchan) \
(sizeof(struct ieee80211req_chaninfo) + \
(((_nchan)-1) * sizeof(struct ieee80211_channel)))
#define IEEE80211_CHANINFO_SPACE(_ci) \
IEEE80211_CHANINFO_SIZE((_ci)->ic_nchans)
/*
* Retrieve the WPA/RSN information element for an associated station.
*/
struct ieee80211req_wpaie { /* old version w/ only one ie */
uint8_t wpa_macaddr[IEEE80211_ADDR_LEN];
uint8_t wpa_ie[IEEE80211_MAX_OPT_IE];
};
struct ieee80211req_wpaie2 {
uint8_t wpa_macaddr[IEEE80211_ADDR_LEN];
uint8_t wpa_ie[IEEE80211_MAX_OPT_IE];
uint8_t rsn_ie[IEEE80211_MAX_OPT_IE];
};
/*
* Retrieve per-node statistics.
*/
struct ieee80211req_sta_stats {
union {
/* NB: explicitly force 64-bit alignment */
uint8_t macaddr[IEEE80211_ADDR_LEN];
uint64_t pad;
} is_u;
struct ieee80211_nodestats is_stats;
};
/*
* Station information block; the mac address is used
* to retrieve other data like stats, unicast key, etc.
*/
struct ieee80211req_sta_info {
uint16_t isi_len; /* total length (mult of 4) */
uint16_t isi_ie_off; /* offset to IE data */
uint16_t isi_ie_len; /* IE length */
uint16_t isi_freq; /* MHz */
uint32_t isi_flags; /* channel flags */
uint16_t isi_state; /* state flags */
uint8_t isi_authmode; /* authentication algorithm */
int8_t isi_rssi; /* receive signal strength */
int8_t isi_noise; /* noise floor */
uint8_t isi_capinfo; /* capabilities */
uint8_t isi_erp; /* ERP element */
uint8_t isi_macaddr[IEEE80211_ADDR_LEN];
uint8_t isi_nrates;
/* negotiated rates */
uint8_t isi_rates[IEEE80211_RATE_MAXSIZE];
uint8_t isi_txrate; /* legacy/IEEE rate or MCS */
uint16_t isi_associd; /* assoc response */
uint16_t isi_txpower; /* current tx power */
uint16_t isi_vlan; /* vlan tag */
/* NB: [IEEE80211_NONQOS_TID] holds seq#'s for non-QoS stations */
uint16_t isi_txseqs[IEEE80211_TID_SIZE];/* tx seq #/TID */
uint16_t isi_rxseqs[IEEE80211_TID_SIZE];/* rx seq#/TID */
uint16_t isi_inact; /* inactivity timer */
uint16_t isi_txmbps; /* current tx rate in .5 Mb/s */
uint32_t isi_jointime; /* time of assoc/join */
struct ieee80211_mimo_info isi_mimo; /* MIMO info for 11n sta's */
/* XXX frag state? */
/* variable length IE data */
};
/*
* Retrieve per-station information; to retrieve all
* specify a mac address of ff:ff:ff:ff:ff:ff.
*/
struct ieee80211req_sta_req {
union {
/* NB: explicitly force 64-bit alignment */
uint8_t macaddr[IEEE80211_ADDR_LEN];
uint64_t pad;
} is_u;
struct ieee80211req_sta_info info[1]; /* variable length */
};
/*
* Get/set per-station tx power cap.
*/
struct ieee80211req_sta_txpow {
uint8_t it_macaddr[IEEE80211_ADDR_LEN];
uint8_t it_txpow;
};
/*
* WME parameters manipulated with IEEE80211_IOC_WME_CWMIN
* through IEEE80211_IOC_WME_ACKPOLICY are set and return
* using i_val and i_len. i_val holds the value itself.
* i_len specifies the AC and, as appropriate, then high bit
* specifies whether the operation is to be applied to the
* BSS or ourself.
*/
#define IEEE80211_WMEPARAM_SELF 0x0000 /* parameter applies to self */
#define IEEE80211_WMEPARAM_BSS 0x8000 /* parameter applies to BSS */
#define IEEE80211_WMEPARAM_VAL 0x7fff /* parameter value */
/*
* Application Information Elements can be appended to a variety
* of frames with the IEE80211_IOC_APPIE request. This request
* piggybacks on a normal ieee80211req; the frame type is passed
* in i_val as the 802.11 FC0 bytes and the length of the IE data
* is passed in i_len. The data is referenced in i_data. If i_len
* is zero then any previously configured IE data is removed. At
* most IEEE80211_MAX_APPIE data be appened. Note that multiple
* IE's can be supplied; the data is treated opaquely.
*/
#define IEEE80211_MAX_APPIE 1024 /* max app IE data */
/*
* Hack: the WPA authenticator uses this mechanism to specify WPA
* ie's that are used instead of the ones normally constructed using
* the cipher state setup with separate ioctls. This avoids issues
* like the authenticator ordering ie data differently than the
* net80211 layer and needing to keep separate state for WPA and RSN.
*/
#define IEEE80211_APPIE_WPA \
(IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON | \
IEEE80211_FC0_SUBTYPE_PROBE_RESP)
/*
* Station mode roaming parameters. These are maintained
* per band/mode and control the roaming algorithm.
*/
struct ieee80211_roamparams_req {
struct ieee80211_roamparam params[IEEE80211_MODE_MAX];
};
/*
* Transmit parameters. These can be used to set fixed transmit
* rate for each operating mode when operating as client or on a
* per-client basis according to the capabilities of the client
* (e.g. an 11b client associated to an 11g ap) when operating as
* an ap.
*
* MCS are distinguished from legacy rates by or'ing in 0x80.
*/
struct ieee80211_txparams_req {
struct ieee80211_txparam params[IEEE80211_MODE_MAX];
};
/*
* Set regulatory domain state with IEEE80211_IOC_REGDOMAIN.
* Note this is both the regulatory description and the channel
* list. The get request for IEEE80211_IOC_REGDOMAIN returns
* only the regdomain info; the channel list is obtained
* separately with IEEE80211_IOC_CHANINFO.
*/
struct ieee80211_regdomain_req {
struct ieee80211_regdomain rd;
struct ieee80211req_chaninfo chaninfo;
};
#define IEEE80211_REGDOMAIN_SIZE(_nchan) \
(sizeof(struct ieee80211_regdomain_req) + \
(((_nchan)-1) * sizeof(struct ieee80211_channel)))
#define IEEE80211_REGDOMAIN_SPACE(_req) \
IEEE80211_REGDOMAIN_SIZE((_req)->chaninfo.ic_nchans)
/*
* Get driver capabilities. Driver, hardware crypto, and
* HT/802.11n capabilities, and a table that describes what
* the radio can do.
*/
struct ieee80211_devcaps_req {
uint32_t dc_drivercaps; /* general driver caps */
uint32_t dc_cryptocaps; /* hardware crypto support */
uint32_t dc_htcaps; /* HT/802.11n support */
struct ieee80211req_chaninfo dc_chaninfo;
};
#define IEEE80211_DEVCAPS_SIZE(_nchan) \
(sizeof(struct ieee80211_devcaps_req) + \
(((_nchan)-1) * sizeof(struct ieee80211_channel)))
#define IEEE80211_DEVCAPS_SPACE(_dc) \
IEEE80211_DEVCAPS_SIZE((_dc)->dc_chaninfo.ic_nchans)
struct ieee80211_chanswitch_req {
struct ieee80211_channel csa_chan; /* new channel */
int csa_mode; /* CSA mode */
int csa_count; /* beacon count to switch */
};
/*
* Get/set per-station vlan tag.
*/
struct ieee80211req_sta_vlan {
uint8_t sv_macaddr[IEEE80211_ADDR_LEN];
uint16_t sv_vlan;
};
#ifdef __FreeBSD__
/*
* FreeBSD-style ioctls.
*/
/* the first member must be matched with struct ifreq */
struct ieee80211req {
char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */
uint16_t i_type; /* req type */
int16_t i_val; /* Index or simple value */
int16_t i_len; /* Index or simple value */
void *i_data; /* Extra data */
};
#define SIOCS80211 _IOW('i', 234, struct ieee80211req)
#define SIOCG80211 _IOWR('i', 235, struct ieee80211req)
#define SIOCG80211STATS _IOWR('i', 236, struct ifreq)
#define IEEE80211_IOC_SSID 1
#define IEEE80211_IOC_NUMSSIDS 2
#define IEEE80211_IOC_WEP 3
#define IEEE80211_WEP_NOSUP -1
#define IEEE80211_WEP_OFF 0
#define IEEE80211_WEP_ON 1
#define IEEE80211_WEP_MIXED 2
#define IEEE80211_IOC_WEPKEY 4
#define IEEE80211_IOC_NUMWEPKEYS 5
#define IEEE80211_IOC_WEPTXKEY 6
#define IEEE80211_IOC_AUTHMODE 7
#define IEEE80211_IOC_STATIONNAME 8
#define IEEE80211_IOC_CHANNEL 9
#define IEEE80211_IOC_POWERSAVE 10
#define IEEE80211_POWERSAVE_NOSUP -1
#define IEEE80211_POWERSAVE_OFF 0
#define IEEE80211_POWERSAVE_CAM 1
#define IEEE80211_POWERSAVE_PSP 2
#define IEEE80211_POWERSAVE_PSP_CAM 3
#define IEEE80211_POWERSAVE_ON IEEE80211_POWERSAVE_CAM
#define IEEE80211_IOC_POWERSAVESLEEP 11
#define IEEE80211_IOC_RTSTHRESHOLD 12
#define IEEE80211_IOC_PROTMODE 13
#define IEEE80211_PROTMODE_OFF 0
#define IEEE80211_PROTMODE_CTS 1
#define IEEE80211_PROTMODE_RTSCTS 2
#define IEEE80211_IOC_TXPOWER 14 /* global tx power limit */
#define IEEE80211_IOC_BSSID 15
#define IEEE80211_IOC_ROAMING 16 /* roaming mode */
#define IEEE80211_IOC_PRIVACY 17 /* privacy invoked */
#define IEEE80211_IOC_DROPUNENCRYPTED 18 /* discard unencrypted frames */
#define IEEE80211_IOC_WPAKEY 19
#define IEEE80211_IOC_DELKEY 20
#define IEEE80211_IOC_MLME 21
/* 22 was IEEE80211_IOC_OPTIE, replaced by IEEE80211_IOC_APPIE */
/* 23 was IEEE80211_IOC_SCAN_REQ */
/* 24 was IEEE80211_IOC_SCAN_RESULTS */
#define IEEE80211_IOC_COUNTERMEASURES 25 /* WPA/TKIP countermeasures */
#define IEEE80211_IOC_WPA 26 /* WPA mode (0,1,2) */
#define IEEE80211_IOC_CHANLIST 27 /* channel list */
#define IEEE80211_IOC_WME 28 /* WME mode (on, off) */
#define IEEE80211_IOC_HIDESSID 29 /* hide SSID mode (on, off) */
#define IEEE80211_IOC_APBRIDGE 30 /* AP inter-sta bridging */
/* 31-35,37-38 were for WPA authenticator settings */
/* 36 was IEEE80211_IOC_DRIVER_CAPS */
#define IEEE80211_IOC_WPAIE 39 /* WPA information element */
#define IEEE80211_IOC_STA_STATS 40 /* per-station statistics */
#define IEEE80211_IOC_MACCMD 41 /* MAC ACL operation */
#define IEEE80211_IOC_CHANINFO 42 /* channel info list */
#define IEEE80211_IOC_TXPOWMAX 43 /* max tx power for channel */
#define IEEE80211_IOC_STA_TXPOW 44 /* per-station tx power limit */
/* 45 was IEEE80211_IOC_STA_INFO */
#define IEEE80211_IOC_WME_CWMIN 46 /* WME: ECWmin */
#define IEEE80211_IOC_WME_CWMAX 47 /* WME: ECWmax */
#define IEEE80211_IOC_WME_AIFS 48 /* WME: AIFSN */
#define IEEE80211_IOC_WME_TXOPLIMIT 49 /* WME: txops limit */
#define IEEE80211_IOC_WME_ACM 50 /* WME: ACM (bss only) */
#define IEEE80211_IOC_WME_ACKPOLICY 51 /* WME: ACK policy (!bss only)*/
#define IEEE80211_IOC_DTIM_PERIOD 52 /* DTIM period (beacons) */
#define IEEE80211_IOC_BEACON_INTERVAL 53 /* beacon interval (ms) */
#define IEEE80211_IOC_ADDMAC 54 /* add sta to MAC ACL table */
#define IEEE80211_IOC_DELMAC 55 /* del sta from MAC ACL table */
#define IEEE80211_IOC_PUREG 56 /* pure 11g (no 11b stations) */
#define IEEE80211_IOC_FF 57 /* ATH fast frames (on, off) */
#define IEEE80211_IOC_TURBOP 58 /* ATH turbo' (on, off) */
#define IEEE80211_IOC_BGSCAN 59 /* bg scanning (on, off) */
#define IEEE80211_IOC_BGSCAN_IDLE 60 /* bg scan idle threshold */
#define IEEE80211_IOC_BGSCAN_INTERVAL 61 /* bg scan interval */
#define IEEE80211_IOC_SCANVALID 65 /* scan cache valid threshold */
/* 66-72 were IEEE80211_IOC_ROAM_* and IEEE80211_IOC_MCAST_RATE */
#define IEEE80211_IOC_FRAGTHRESHOLD 73 /* tx fragmentation threshold */
#define IEEE80211_IOC_BURST 75 /* packet bursting */
#define IEEE80211_IOC_SCAN_RESULTS 76 /* get scan results */
#define IEEE80211_IOC_BMISSTHRESHOLD 77 /* beacon miss threshold */
#define IEEE80211_IOC_STA_INFO 78 /* station/neighbor info */
#define IEEE80211_IOC_WPAIE2 79 /* WPA+RSN info elements */
#define IEEE80211_IOC_CURCHAN 80 /* current channel */
#define IEEE80211_IOC_SHORTGI 81 /* 802.11n half GI */
#define IEEE80211_IOC_AMPDU 82 /* 802.11n A-MPDU (on, off) */
#define IEEE80211_IOC_AMPDU_LIMIT 83 /* A-MPDU length limit */
#define IEEE80211_IOC_AMPDU_DENSITY 84 /* A-MPDU density */
#define IEEE80211_IOC_AMSDU 85 /* 802.11n A-MSDU (on, off) */
#define IEEE80211_IOC_AMSDU_LIMIT 86 /* A-MSDU length limit */
#define IEEE80211_IOC_PUREN 87 /* pure 11n (no legacy sta's) */
#define IEEE80211_IOC_DOTH 88 /* 802.11h (on, off) */
/* 89-91 were regulatory items */
#define IEEE80211_IOC_HTCOMPAT 92 /* support pre-D1.10 HT ie's */
#define IEEE80211_IOC_DWDS 93 /* DWDS/4-address handling */
#define IEEE80211_IOC_INACTIVITY 94 /* sta inactivity handling */
#define IEEE80211_IOC_APPIE 95 /* application IE's */
#define IEEE80211_IOC_WPS 96 /* WPS operation */
#define IEEE80211_IOC_TSN 97 /* TSN operation */
#define IEEE80211_IOC_DEVCAPS 98 /* driver+device capabilities */
#define IEEE80211_IOC_CHANSWITCH 99 /* start 11h channel switch */
#define IEEE80211_IOC_DFS 100 /* DFS (on, off) */
#define IEEE80211_IOC_DOTD 101 /* 802.11d (on, off) */
#define IEEE80211_IOC_HTPROTMODE 102 /* HT protection (off, rts) */
#define IEEE80211_IOC_SCAN_REQ 103 /* scan w/ specified params */
#define IEEE80211_IOC_SCAN_CANCEL 104 /* cancel ongoing scan */
#define IEEE80211_IOC_HTCONF 105 /* HT config (off, HT20, HT40)*/
#define IEEE80211_IOC_REGDOMAIN 106 /* regulatory domain info */
#define IEEE80211_IOC_ROAM 107 /* roaming params en masse */
#define IEEE80211_IOC_TXPARAMS 108 /* tx parameters */
#define IEEE80211_IOC_STA_VLAN 109 /* per-station vlan tag */
#define IEEE80211_IOC_SMPS 110 /* MIMO power save */
#define IEEE80211_IOC_RIFS 111 /* RIFS config (on, off) */
#define IEEE80211_IOC_TDMA_SLOT 201 /* TDMA: assigned slot */
#define IEEE80211_IOC_TDMA_SLOTCNT 202 /* TDMA: slots in bss */
#define IEEE80211_IOC_TDMA_SLOTLEN 203 /* TDMA: slot length (usecs) */
#define IEEE80211_IOC_TDMA_BINTERVAL 204 /* TDMA: beacon intvl (slots) */
/*
* Parameters for controlling a scan requested with
* IEEE80211_IOC_SCAN_REQ.
*
* Active scans cause ProbeRequest frames to be issued for each
* specified ssid and, by default, a broadcast ProbeRequest frame.
* The set of ssid's is specified in the request.
*
* By default the scan will cause a BSS to be joined (in station/adhoc
* mode) or a channel to be selected for operation (hostap mode).
* To disable that specify IEEE80211_IOC_SCAN_NOPICK and if the
*
* If the station is currently associated to an AP then a scan request
* will cause the station to leave the current channel and potentially
* miss frames from the AP. Alternatively the station may notify the
* AP that it is going into power save mode before it leaves the channel.
* This ensures frames for the station are buffered by the AP. This is
* termed a ``bg scan'' and is requested with the IEEE80211_IOC_SCAN_BGSCAN
* flag. Background scans may take longer than foreground scans and may
* be preempted by traffic. If a station is not associated to an AP
* then a request for a background scan is automatically done in the
* foreground.
*
* The results of the scan request are cached by the system. This
* information is aged out and/or invalidated based on events like not
* being able to associated to an AP. To flush the current cache
* contents before doing a scan the IEEE80211_IOC_SCAN_FLUSH flag may
* be specified.
*
* By default the scan will be done until a suitable AP is located
* or a channel is found for use. A scan can also be constrained
* to be done once (IEEE80211_IOC_SCAN_ONCE) or to last for no more
* than a specified duration.
*/
struct ieee80211_scan_req {
int sr_flags;
#define IEEE80211_IOC_SCAN_NOPICK 0x00001 /* scan only, no selection */
#define IEEE80211_IOC_SCAN_ACTIVE 0x00002 /* active scan (probe req) */
#define IEEE80211_IOC_SCAN_PICK1ST 0x00004 /* ``hey sailor'' mode */
#define IEEE80211_IOC_SCAN_BGSCAN 0x00008 /* bg scan, exit ps at end */
#define IEEE80211_IOC_SCAN_ONCE 0x00010 /* do one complete pass */
#define IEEE80211_IOC_SCAN_NOBCAST 0x00020 /* don't send bcast probe req */
#define IEEE80211_IOC_SCAN_NOJOIN 0x00040 /* no auto-sequencing */
#define IEEE80211_IOC_SCAN_FLUSH 0x10000 /* flush scan cache first */
#define IEEE80211_IOC_SCAN_CHECK 0x20000 /* check scan cache first */
u_int sr_duration; /* duration (ms) */
#define IEEE80211_IOC_SCAN_DURATION_MIN 1
#define IEEE80211_IOC_SCAN_DURATION_MAX 0x7fffffff
#define IEEE80211_IOC_SCAN_FOREVER IEEE80211_IOC_SCAN_DURATION_MAX
u_int sr_mindwell; /* min channel dwelltime (ms) */
u_int sr_maxdwell; /* max channel dwelltime (ms) */
int sr_nssid;
#define IEEE80211_IOC_SCAN_MAX_SSID 3
struct {
int len; /* length in bytes */
uint8_t ssid[IEEE80211_NWID_LEN]; /* ssid contents */
} sr_ssid[IEEE80211_IOC_SCAN_MAX_SSID];
};
/*
* Scan result data returned for IEEE80211_IOC_SCAN_RESULTS.
* Each result is a fixed size structure followed by a variable
* length SSID and one or more variable length information elements.
* The size of each variable length item is found in the fixed
* size structure and the entire length of the record is specified
* in isr_len. Result records are rounded to a multiple of 4 bytes.
*/
struct ieee80211req_scan_result {
uint16_t isr_len; /* total length (mult of 4) */
uint16_t isr_ie_off; /* offset to SSID+IE data */
uint16_t isr_ie_len; /* IE length */
uint16_t isr_freq; /* MHz */
uint16_t isr_flags; /* channel flags */
int8_t isr_noise;
int8_t isr_rssi;
uint8_t isr_intval; /* beacon interval */
uint8_t isr_capinfo; /* capabilities */
uint8_t isr_erp; /* ERP element */
uint8_t isr_bssid[IEEE80211_ADDR_LEN];
uint8_t isr_nrates;
uint8_t isr_rates[IEEE80211_RATE_MAXSIZE];
uint8_t isr_ssid_len; /* SSID length */
/* variable length SSID followed by IE data */
};
/*
* Virtual AP cloning parameters. The parent device must
* be a vap-capable device. All parameters specified with
* the clone request are fixed for the lifetime of the vap.
*
* There are two flavors of WDS vaps: legacy and dynamic.
* Legacy WDS operation implements a static binding between
* two stations encapsulating traffic in 4-address frames.
* Dynamic WDS vaps are created when a station associates to
* an AP and sends a 4-address frame. If the AP vap is
* configured to support WDS then this will generate an
* event to user programs listening on the routing socket
* and a Dynamic WDS vap will be created to handle traffic
* to/from that station. In both cases the bssid of the
* peer must be specified when creating the vap.
*
* By default a vap will inherit the mac address/bssid of
* the underlying device. To request a unique address the
* IEEE80211_CLONE_BSSID flag should be supplied. This is
* meaningless for WDS vaps as they share the bssid of an
* AP vap that must otherwise exist. Note that some devices
* may not be able to support multiple addresses.
*
* Station mode vap's normally depend on the device to notice
* when the AP stops sending beacon frames. If IEEE80211_CLONE_NOBEACONS
* is specified the net80211 layer will do this in s/w. This
* is mostly useful when setting up a WDS repeater/extender where
* an AP vap is combined with a sta vap and the device isn't able
* to track beacon frames in hardware.
*/
struct ieee80211_clone_params {
char icp_parent[IFNAMSIZ]; /* parent device */
uint16_t icp_opmode; /* operating mode */
uint16_t icp_flags; /* see below */
uint8_t icp_bssid[IEEE80211_ADDR_LEN]; /* for WDS links */
uint8_t icp_macaddr[IEEE80211_ADDR_LEN];/* local address */
};
#define IEEE80211_CLONE_BSSID 0x0001 /* allocate unique mac/bssid */
#define IEEE80211_CLONE_NOBEACONS 0x0002 /* don't setup beacon timers */
#define IEEE80211_CLONE_WDSLEGACY 0x0004 /* legacy WDS processing */
#define IEEE80211_CLONE_MACADDR 0x0008 /* use specified mac addr */
#define IEEE80211_CLONE_TDMA 0x0010 /* operate in TDMA mode */
#endif /* __FreeBSD__ */
#endif /* _NET80211_IEEE80211_IOCTL_H_ */
Reference in New Issue View Git Blame Copy Permalink