3f8c45065e
===================================
HARP | Host ATM Research Platform
===================================
HARP 3
What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols. It is intended to
be a high-quality platform for IP/ATM research.
HARP provides a way for IP hosts to connect to ATM networks. It supports
standard methods of communication using IP over ATM. A host's standard IP
software sends and receives datagrams via a HARP ATM interface. HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.
HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM. HARP is
self-contained; it requires no other licenses or commercial software packages.
HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:
o IETF ATMARP address resolution client
o IETF ATMARP address resolution server
o IETF SCSP/ATMARP server
o UNI 3.1 and 3.0 signalling protocols
o Fore Systems's SPANS signalling protocol
What's supported
----------------
The following are supported by HARP 3:
o ATM Host Interfaces
- FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
o ATM Signalling Protocols
- The ATM Forum UNI 3.1 signalling protocol
- The ATM Forum UNI 3.0 signalling protocol
- The ATM Forum ILMI address registration
- FORE Systems's proprietary SPANS signalling protocol
- Permanent Virtual Channels (PVCs)
o IETF "Classical IP and ARP over ATM" model
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
- RFC 1577, "Classical IP and ARP over ATM"
- RFC 1626, "Default IP MTU for use over ATM AAL5"
- RFC 1755, "ATM Signaling Support for IP over ATM"
- RFC 2225, "Classical IP and ARP over ATM"
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
"A Distributed ATMARP Service Using SCSP"
o ATM Sockets interface
- The file atm-sockets.txt contains further information
What's not supported
--------------------
The following major features of the above list are not currently supported:
o UNI point-to-multipoint support
o Driver support for Traffic Control/Quality of Service
o SPANS multicast and MPP support
o SPANS signalling using Efficient adapters
This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).
Reviewed (lightly) by: phk
Submitted by: Network Computing Services, Inc.
983 lines
32 KiB
Makefile
983 lines
32 KiB
Makefile
#
|
|
# $Id: Makefile.inc1,v 1.13 1998/09/15 07:46:17 gibbs Exp $
|
|
#
|
|
# Make command line options:
|
|
# -DCLOBBER will remove /usr/include
|
|
# -DMAKE_KERBEROS4 to build KerberosIV
|
|
# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
|
|
# -DNOCLEAN do not clean at all
|
|
# -DNOTOOLS do not rebuild any tools first
|
|
# -DNOCRYPT will prevent building of crypt versions
|
|
# -DNOLKM do not build loadable kernel modules
|
|
# -DNOPROFILE do not build profiled libraries
|
|
# -DNOSECURE do not go into secure subdir
|
|
# -DNOGAMES do not go into games subdir
|
|
# -DNOSHARE do not go into share subdir
|
|
# -DNOINFO do not make or install info files
|
|
# -DNOLIBC_R do not build libc_r.
|
|
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
|
|
|
|
#
|
|
# The intended user-driven targets are:
|
|
# buildworld - rebuild *everything*, including glue to help do upgrades
|
|
# installworld- install everything built by "buildworld"
|
|
# update - convenient way to update your source tree (eg: sup/cvs)
|
|
# most - build user commands, no libraries or include files
|
|
# installmost - install user commands, no libraries or include files
|
|
#
|
|
# Standard targets (not defined here) are documented in the makefiles in
|
|
# /usr/share/mk. These include:
|
|
# obj depend all install clean cleandepend cleanobj
|
|
|
|
# Put initial settings here.
|
|
SUBDIR=
|
|
|
|
# We must do share/info early so that installation of info `dir'
|
|
# entries works correctly. Do it first since it is less likely to
|
|
# grow dependencies on include and lib than vice versa.
|
|
.if exists(share/info)
|
|
SUBDIR+= share/info
|
|
.endif
|
|
|
|
# We must do include and lib early so that the perl *.ph generation
|
|
# works correctly as it uses the header files installed by this.
|
|
.if exists(include)
|
|
SUBDIR+= include
|
|
.endif
|
|
.if exists(lib)
|
|
SUBDIR+= lib
|
|
.endif
|
|
|
|
.if exists(bin)
|
|
SUBDIR+= bin
|
|
.endif
|
|
.if exists(games) && !defined(NOGAMES)
|
|
SUBDIR+= games
|
|
.endif
|
|
.if exists(gnu)
|
|
SUBDIR+= gnu
|
|
.endif
|
|
.if exists(kerberosIV) && exists(crypto) && !defined(NOCRYPT) && \
|
|
defined(MAKE_KERBEROS4)
|
|
SUBDIR+= kerberosIV
|
|
.endif
|
|
.if exists(libexec)
|
|
SUBDIR+= libexec
|
|
.endif
|
|
.if exists(sbin)
|
|
SUBDIR+= sbin
|
|
.endif
|
|
.if exists(share) && !defined(NOSHARE)
|
|
SUBDIR+= share
|
|
.endif
|
|
.if exists(sys)
|
|
SUBDIR+= sys
|
|
.endif
|
|
.if exists(usr.bin)
|
|
SUBDIR+= usr.bin
|
|
.endif
|
|
.if exists(usr.sbin)
|
|
SUBDIR+= usr.sbin
|
|
.endif
|
|
.if exists(secure) && !defined(NOCRYPT) && !defined(NOSECURE)
|
|
SUBDIR+= secure
|
|
.endif
|
|
.if exists(lkm) && !defined(NOLKM) && ${OBJFORMAT} == "aout"
|
|
SUBDIR+= lkm
|
|
.endif
|
|
|
|
# etc must be last for "distribute" to work
|
|
.if exists(etc)
|
|
SUBDIR+= etc
|
|
.endif
|
|
|
|
# These are last, since it is nice to at least get the base system
|
|
# rebuilt before you do them.
|
|
.if defined(LOCAL_DIRS)
|
|
.for _DIR in ${LOCAL_DIRS}
|
|
.if exists(${_DIR}) & exists(${_DIR}/Makefile)
|
|
SUBDIR+= ${_DIR}
|
|
.endif
|
|
.endfor
|
|
.endif
|
|
|
|
OBJDIR= obj
|
|
|
|
.if defined(NOCLEAN)
|
|
CLEANDIR=
|
|
.else
|
|
.if defined(NOCLEANDIR)
|
|
CLEANDIR= clean cleandepend
|
|
.else
|
|
CLEANDIR= cleandir
|
|
.endif
|
|
.endif
|
|
|
|
.if !defined(NOCLEAN)
|
|
_NODEPEND= true
|
|
.endif
|
|
.if defined(_NODEPEND)
|
|
_DEPEND= cleandepend
|
|
.else
|
|
_DEPEND= depend
|
|
.endif
|
|
|
|
SUP?= cvsup
|
|
SUPFLAGS?= -g -L 2 -P -
|
|
|
|
#
|
|
# While building tools for bootstrapping, we don't need to waste time on
|
|
# shared or profiled libraries, shared linkage, or documentation, except
|
|
# when the tools won't get cleaned we must use the defaults for shared
|
|
# libraries and shared linkage (and this doesn't waste time).
|
|
# XXX actually, we do need to waste time building shared libraries.
|
|
#
|
|
.if defined(NOCLEAN)
|
|
MK_FLAGS= -DNOINFO -DNOMAN -DNOPROFILE
|
|
.else
|
|
MK_FLAGS= -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED
|
|
.endif
|
|
|
|
#
|
|
# Define the location of the temporary installation directory. Note that
|
|
# MAKEOBJDIRPREFIX normally isn't defined so if the current directory is
|
|
# /usr/src, then the world temporary directory is /usr/obj/usr/src/tmp.
|
|
#
|
|
# During the transition from aout to elf format on i386, MAKEOBJDIRPREFIX
|
|
# is set by the parent makefile (Makefile.inc0) to be /usr/obj/${OBJFORMAT}
|
|
# in order to keep aout and elf format files apart.
|
|
#
|
|
.if defined(MAKEOBJDIRPREFIX)
|
|
WORLDTMP= ${MAKEOBJDIRPREFIX}${.CURDIR}/tmp
|
|
.else
|
|
WORLDTMP= /usr/obj${.CURDIR}/tmp
|
|
.endif
|
|
|
|
#
|
|
# Define the PATH to the build tools.
|
|
#
|
|
# If not building tools, the PATH always points to the installed binaries.
|
|
# The NOTOOLS option assumes that in installed tools are good enough and that
|
|
# the user's PATH will locate to appropriate tools. This option is required
|
|
# for a cross-compiled build environment.
|
|
#
|
|
# If building tools, then the PATH includes the world temporary directories
|
|
# so that the bootstrapped tools are used as soon as they are built. The
|
|
# strict path is for use after all tools are supposed to have been
|
|
# bootstrapped. It doesn't allow any of the installed tools to be used.
|
|
#
|
|
.if defined(NOTOOLS)
|
|
# Default root of the tool tree
|
|
TOOLROOT?=
|
|
# Choose the PATH relative to the root of the tool tree
|
|
PATH= ${TOOLROOT}/sbin:${TOOLROOT}/bin:${TOOLROOT}/usr/sbin:${TOOLROOT}/usr/bin:${TOOLROOT}/usr/games
|
|
.else
|
|
TOOLROOT= ${WORLDTMP}
|
|
.endif
|
|
STRICTTMPPATH= ${TOOLROOT}/sbin:${TOOLROOT}/usr/sbin:${TOOLROOT}/bin:${TOOLROOT}/usr/bin
|
|
TMPPATH= ${STRICTTMPPATH}:${PATH}
|
|
|
|
# XXX COMPILER_PATH is needed for finding cc1, ld and as
|
|
# XXX GCC_EXEC_PREFIX is for *crt.o. It is probably unnecessary now
|
|
# that LIBRARY_PATH is set. We still can't use -nostdlib, since gcc
|
|
# wouldn't link *crt.o or libgcc if it were used.
|
|
# XXX LD_LIBRARY_PATH is for ld.so. It is also used by ld, although we don't
|
|
# want that - all compile-time library paths should be resolved by gcc.
|
|
# It fails for set[ug]id executables (are any used?).
|
|
COMPILER_ENV= BISON_SIMPLE=${TOOLROOT}/usr/share/misc/bison.simple \
|
|
COMPILER_PATH=${TOOLROOT}/usr/libexec:${TOOLROOT}/usr/bin \
|
|
GCC_EXEC_PREFIX=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib/ \
|
|
LD_LIBRARY_PATH=${TOOLROOT}${SHLIBDIR} \
|
|
LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib
|
|
|
|
BMAKEENV= PATH=${TMPPATH} ${COMPILER_ENV} NOEXTRADEPEND=t \
|
|
OBJFORMAT_PATH=${TOOLROOT}/usr/libexec:/usr/libexec
|
|
XMAKEENV= PATH=${STRICTTMPPATH} ${COMPILER_ENV} \
|
|
OBJFORMAT_PATH=${TOOLROOT}/usr/libexec \
|
|
CFLAGS="-nostdinc ${CFLAGS}" # XXX -nostdlib
|
|
|
|
# used to compile and install 'make' in temporary build tree
|
|
MAKETMP= ${WORLDTMP}/make
|
|
IBMAKE= ${BMAKEENV} MAKEOBJDIR=${MAKETMP} ${MAKE} DESTDIR=${WORLDTMP}
|
|
|
|
.if defined(NOTOOLS)
|
|
# bootstrap make
|
|
BMAKE= ${BMAKEENV} ${MAKE} DESTDIR=${WORLDTMP}
|
|
# cross make used for compilation
|
|
XMAKE= ${XMAKEENV} ${MAKE} DESTDIR=${WORLDTMP}
|
|
# cross make used for final installation
|
|
IXMAKE= ${XMAKEENV} ${MAKE}
|
|
.else
|
|
# bootstrap make
|
|
BMAKE= ${BMAKEENV} ${WORLDTMP}/usr/bin/make DESTDIR=${WORLDTMP}
|
|
# cross make used for compilation
|
|
XMAKE= ${XMAKEENV} ${WORLDTMP}/usr/bin/make DESTDIR=${WORLDTMP}
|
|
# cross make used for final installation
|
|
IXMAKE= ${XMAKEENV} ${WORLDTMP}/usr/bin/make
|
|
.endif
|
|
|
|
#
|
|
# buildworld
|
|
#
|
|
# Attempt to rebuild the entire system, with reasonable chance of
|
|
# success, regardless of how old your existing system is.
|
|
#
|
|
buildworld: check-objformat
|
|
.if !defined(NOCLEAN)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Cleaning up the temporary ${OBJFORMAT} build tree"
|
|
@echo "--------------------------------------------------------------"
|
|
mkdir -p ${WORLDTMP}
|
|
chflags -R noschg ${WORLDTMP}/
|
|
rm -rf ${WORLDTMP}
|
|
.endif
|
|
.if !defined(NOTOOLS)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Making make"
|
|
@echo "--------------------------------------------------------------"
|
|
mkdir -p ${WORLDTMP}/usr/bin ${MAKETMP}
|
|
( \
|
|
cd ${.CURDIR}/usr.bin/make; \
|
|
MAKEOBJDIRPREFIX=""; unset MAKEOBJDIRPREFIX; \
|
|
${IBMAKE} -I${.CURDIR}/share/mk ${MK_FLAGS} all; \
|
|
${IBMAKE} -I${.CURDIR}/share/mk ${MK_FLAGS} install; \
|
|
${IBMAKE} -I${.CURDIR}/share/mk ${MK_FLAGS} clean \
|
|
)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Making mtree"
|
|
@echo "--------------------------------------------------------------"
|
|
mkdir -p ${WORLDTMP}/usr/sbin ${WORLDTMP}/mtree
|
|
( \
|
|
cd ${.CURDIR}/usr.sbin/mtree; \
|
|
MAKEOBJDIRPREFIX=""; unset MAKEOBJDIRPREFIX; \
|
|
export MAKEOBJDIR=${WORLDTMP}/mtree; \
|
|
${BMAKE} ${MK_FLAGS} all; \
|
|
${BMAKE} ${MK_FLAGS} -B install clean \
|
|
)
|
|
.endif
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Making hierarchy"
|
|
@echo "--------------------------------------------------------------"
|
|
mkdir -p ${WORLDTMP}
|
|
cd ${.CURDIR}; ${BMAKE} -f Makefile.inc1 hierarchy
|
|
.if !defined(NOCLEAN)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Cleaning up the ${OBJFORMAT} obj tree"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${BMAKE} -f Makefile.inc1 ${CLEANDIR:S/^/par-/}
|
|
.endif
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding the ${OBJFORMAT} obj tree"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${BMAKE} -f Makefile.inc1 par-${OBJDIR}
|
|
.if !defined(NOTOOLS)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding ${OBJFORMAT} bootstrap tools"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${BMAKE} -f Makefile.inc1 bootstrap
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding tools necessary to build the include files"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${BMAKE} -f Makefile.inc1 include-tools
|
|
.endif
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding ${DESTDIR}/usr/include"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; SHARED=copies ${BMAKE} -f Makefile.inc1 includes
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding bootstrap libraries"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${BMAKE} -f Makefile.inc1 bootstrap-libraries
|
|
.if !defined(NOTOOLS)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding tools needed to build libraries"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${BMAKE} -f Makefile.inc1 lib-tools
|
|
.endif
|
|
.if !defined(NOTOOLS)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding all other tools needed to build the ${OBJFORMAT} world"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${BMAKE} -f Makefile.inc1 build-tools
|
|
.endif
|
|
.if !defined(_NODEPEND)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding dependencies"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${XMAKE} -f Makefile.inc1 par-depend
|
|
.endif
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Building ${OBJFORMAT} libraries"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${XMAKE} -DNOINFO -DNOMAN -f Makefile.inc1 libraries
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Building everything.."
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${XMAKE} -f Makefile.inc1 all
|
|
|
|
everything:
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Building everything.."
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${XMAKE} -f Makefile.inc1 all
|
|
|
|
#
|
|
# installworld
|
|
#
|
|
# Installs everything compiled by a 'buildworld'.
|
|
#
|
|
installworld:
|
|
cd ${.CURDIR}; ${IXMAKE} -f Makefile.inc1 reinstall
|
|
|
|
#
|
|
# reinstall
|
|
#
|
|
# If you have a build server, you can NFS mount the source and obj directories
|
|
# and do a 'make reinstall' on the *client* to install new binaries from the
|
|
# most recent server build.
|
|
#
|
|
reinstall:
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Making hierarchy"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Installing everything.."
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
|
|
.if ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "aout"
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Re-scanning the shared libraries.."
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; /sbin/ldconfig -R
|
|
.endif
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding man page indexes"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/share/man; ${MAKE} makedb
|
|
|
|
#
|
|
# update
|
|
#
|
|
# Update the source tree, by running sup and/or running cvs to update to the
|
|
# latest copy.
|
|
#
|
|
update:
|
|
.if defined(SUP_UPDATE)
|
|
@echo "--------------------------------------------------------------"
|
|
@echo "Running ${SUP}"
|
|
@echo "--------------------------------------------------------------"
|
|
@${SUP} ${SUPFLAGS} ${SUPFILE}
|
|
.if defined(SUPFILE1)
|
|
@${SUP} ${SUPFLAGS} ${SUPFILE1}
|
|
.endif
|
|
.if defined(SUPFILE2)
|
|
@${SUP} ${SUPFLAGS} ${SUPFILE2}
|
|
.endif
|
|
.endif
|
|
.if defined(CVS_UPDATE)
|
|
@echo "--------------------------------------------------------------"
|
|
@echo "Updating /usr/src from cvs repository" ${CVSROOT}
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; cvs -q update -P -d
|
|
.endif
|
|
|
|
#
|
|
# most
|
|
#
|
|
# Build most of the user binaries on the existing system libs and includes.
|
|
#
|
|
most:
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Building programs only"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/bin; ${MAKE} all
|
|
cd ${.CURDIR}/sbin; ${MAKE} all
|
|
cd ${.CURDIR}/libexec; ${MAKE} all
|
|
cd ${.CURDIR}/usr.bin; ${MAKE} all
|
|
cd ${.CURDIR}/usr.sbin; ${MAKE} all
|
|
cd ${.CURDIR}/gnu/libexec; ${MAKE} all
|
|
cd ${.CURDIR}/gnu/usr.bin; ${MAKE} all
|
|
cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} all
|
|
#.if defined(MAKE_KERBEROS4) && !defined(NOCRYPT)
|
|
# cd ${.CURDIR}/kerberosIV; ${MAKE} most
|
|
#.endif
|
|
#.if !defined(NOSECURE) && !defined(NOCRYPT)
|
|
# cd ${.CURDIR}/secure; ${MAKE} most
|
|
#.endif
|
|
|
|
#
|
|
# installmost
|
|
#
|
|
# Install the binaries built by the 'most' target. This does not include
|
|
# libraries or include files.
|
|
#
|
|
installmost:
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Installing programs only"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/bin; ${MAKE} install
|
|
cd ${.CURDIR}/sbin; ${MAKE} install
|
|
cd ${.CURDIR}/libexec; ${MAKE} install
|
|
cd ${.CURDIR}/usr.bin; ${MAKE} install
|
|
cd ${.CURDIR}/usr.sbin; ${MAKE} install
|
|
cd ${.CURDIR}/gnu/libexec; ${MAKE} install
|
|
cd ${.CURDIR}/gnu/usr.bin; ${MAKE} install
|
|
cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} install
|
|
#.if defined(MAKE_KERBEROS4) && !defined(NOCRYPT)
|
|
# cd ${.CURDIR}/kerberosIV; ${MAKE} installmost
|
|
#.endif
|
|
#.if !defined(NOSECURE) && !defined(NOCRYPT)
|
|
# cd ${.CURDIR}/secure; ${MAKE} installmost
|
|
#.endif
|
|
|
|
#
|
|
# ------------------------------------------------------------------------
|
|
#
|
|
# From here onwards are utility targets used by the 'make world' and
|
|
# related targets. If your 'world' breaks, you may like to try to fix
|
|
# the problem and manually run the following targets to attempt to
|
|
# complete the build. Beware, this is *not* guaranteed to work, you
|
|
# need to have a pretty good grip on the current state of the system
|
|
# to attempt to manually finish it. If in doubt, 'make world' again.
|
|
#
|
|
|
|
#
|
|
# hierarchy - ensure that all the needed directories are present
|
|
#
|
|
hierarchy:
|
|
cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
|
|
|
|
#
|
|
# bootstrap - [re]build tools needed to run the actual build, this includes
|
|
# tools needed by 'make depend', as some tools are needed to generate source
|
|
# for the dependency information to be gathered from.
|
|
#
|
|
bootstrap:
|
|
.if defined(DESTDIR)
|
|
rm -f ${DESTDIR}/usr/src/sys
|
|
ln -s ${.CURDIR}/sys ${DESTDIR}/usr/src
|
|
cd ${.CURDIR}/include; find -dx . | cpio -dump ${DESTDIR}/usr/include
|
|
.for d in net netatm netinet posix4 sys vm machine
|
|
if [ -h ${DESTDIR}/usr/include/$d ]; then \
|
|
rm -f ${DESTDIR}/usr/include/$d ; \
|
|
fi
|
|
.endfor
|
|
cd ${.CURDIR}/sys; \
|
|
find -dx net netatm netinet posix4 sys vm -name '*.h' -o -type d | \
|
|
cpio -dump ${DESTDIR}/usr/include
|
|
mkdir -p ${DESTDIR}/usr/include/machine
|
|
cd ${.CURDIR}/sys/${MACHINE_ARCH}/include; find -dx . -name '*.h' -o -type d | \
|
|
cpio -dump ${DESTDIR}/usr/include/machine
|
|
.endif
|
|
cd ${.CURDIR}/usr.bin/make; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${MK_FLAGS} all; \
|
|
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
|
|
cd ${.CURDIR}/usr.bin/xinstall; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${MK_FLAGS} all; \
|
|
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
|
|
cd ${.CURDIR}/usr.bin/yacc; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${MK_FLAGS} all; \
|
|
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
|
|
cd ${.CURDIR}/usr.bin/lex; ${MAKE} bootstrap; \
|
|
${MAKE} ${MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${MK_FLAGS} -DNOLIB all; \
|
|
${MAKE} ${MK_FLAGS} -DNOLIB -B install ${CLEANDIR}
|
|
cd ${.CURDIR}/usr.bin/lex; ${MAKE} ${OBJDIR}
|
|
cd ${.CURDIR}/usr.sbin/mtree; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${MK_FLAGS} all; \
|
|
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
|
|
.if defined(DESTDIR)
|
|
cd ${.CURDIR}/include && ${MAKE} copies
|
|
.endif
|
|
|
|
#
|
|
# include-tools - generally the same as 'bootstrap', except that it's for
|
|
# things that are specifically needed to generate include files.
|
|
#
|
|
# XXX should be merged with bootstrap, it's not worth keeeping them separate.
|
|
# Well, maybe it is now. We force 'cleandepend' here to avoid dependencies
|
|
# on cleaned away headers in ${WORLDTMP}.
|
|
#
|
|
include-tools:
|
|
.for d in usr.bin/compile_et usr.bin/rpcgen
|
|
cd ${.CURDIR}/$d; ${MAKE} cleandepend; \
|
|
${MAKE} ${MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${MK_FLAGS} all; \
|
|
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
|
|
.endfor
|
|
|
|
#
|
|
# includes - possibly generate and install the include files.
|
|
#
|
|
includes:
|
|
.if defined(CLOBBER)
|
|
rm -rf ${DESTDIR}/usr/include/*
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
|
|
-p ${DESTDIR}/usr/include
|
|
.endif
|
|
cd ${.CURDIR}/include; ${MAKE} -B all install
|
|
cd ${.CURDIR}/gnu/include; ${MAKE} install
|
|
cd ${.CURDIR}/gnu/lib/libmp; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/gnu/lib/libobjc; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/gnu/lib/libreadline; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/gnu/lib/libregex; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/gnu/lib/libstdc++; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/gnu/lib/libg++; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/gnu/lib/libdialog; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/gnu/lib/libgmp; ${MAKE} beforeinstall
|
|
.if exists(secure) && !defined(NOCRYPT)
|
|
cd ${.CURDIR}/secure/lib/libdes; ${MAKE} beforeinstall
|
|
.endif
|
|
.if exists(kerberosIV) && !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
|
|
cd ${.CURDIR}/kerberosIV/lib/libacl; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/kerberosIV/lib/libkadm; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/kerberosIV/lib/libkafs; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/kerberosIV/lib/libkdb; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/kerberosIV/lib/libkrb; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
|
|
.else
|
|
cd ${.CURDIR}/lib/libtelnet; ${MAKE} beforeinstall
|
|
.endif
|
|
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
|
|
cd ${.CURDIR}/lib/csu/${MACHINE_ARCH}; ${MAKE} beforeinstall
|
|
.endif
|
|
cd ${.CURDIR}/lib/libalias; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libdevstat; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libc; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libcalendar; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libcam; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libcurses; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libdisk; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libedit; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libftpio; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libmd; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libmytinfo; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libncurses; ${MAKE} beforeinstall
|
|
.if !defined(WANT_CSRG_LIBM)
|
|
cd ${.CURDIR}/lib/msun; ${MAKE} beforeinstall
|
|
.endif
|
|
cd ${.CURDIR}/lib/libopie; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libpcap; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/librpcsvc; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libskey; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libtermcap; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libcom_err; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libss; ${MAKE} -B hdrs beforeinstall
|
|
cd ${.CURDIR}/lib/libscsi; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libutil; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libvgl; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/lib/libz; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/usr.bin/f2c; ${MAKE} beforeinstall
|
|
cd ${.CURDIR}/usr.bin/lex; ${MAKE} beforeinstall
|
|
|
|
#
|
|
# Declare tools if they are not required on all architectures.
|
|
#
|
|
.if ${MACHINE_ARCH} == "i386"
|
|
# aout tools:
|
|
_aout_ar = usr.bin/ar
|
|
_aout_as = gnu/usr.bin/as
|
|
_aout_ld = gnu/usr.bin/ld
|
|
_aout_nm = usr.bin/nm
|
|
_aout_ranlib = usr.bin/ranlib
|
|
_aout_size = usr.bin/size
|
|
_aout_strip = usr.bin/strip
|
|
.endif
|
|
|
|
#
|
|
# lib-tools - build tools to compile and install the libraries.
|
|
#
|
|
# XXX gperf is required for cc
|
|
# XXX a new ld and tsort is required for cc
|
|
lib-tools:
|
|
.for d in \
|
|
gnu/usr.bin/gperf \
|
|
${_aout_ld} \
|
|
usr.bin/tsort \
|
|
${_aout_as} \
|
|
gnu/usr.bin/bison \
|
|
gnu/usr.bin/cc \
|
|
${_aout_ar} \
|
|
usr.bin/env \
|
|
usr.bin/lex/lib \
|
|
usr.bin/mk_cmds \
|
|
${_aout_nm} \
|
|
${_aout_ranlib} \
|
|
${_aout_strip} \
|
|
gnu/usr.bin/binutils \
|
|
usr.bin/uudecode \
|
|
share/info \
|
|
usr.bin/objformat
|
|
cd ${.CURDIR}/$d; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${MK_FLAGS} all; \
|
|
${MAKE} ${MK_FLAGS} -B install; \
|
|
${MAKE} ${MK_FLAGS:S/-DNOPIC//} -B ${CLEANDIR} ${OBJDIR}
|
|
.endfor
|
|
|
|
#
|
|
# We have to know too much about ordering and subdirs in the lib trees:
|
|
#
|
|
# To satisfy shared library linkage when only the libraries being built
|
|
# are visible:
|
|
#
|
|
# libcom_err must be built before libss.
|
|
# libcrypt and libmd must be built before libskey.
|
|
# libmytinfo must be built before libdialog and libncurses.
|
|
# libncurses must be built before libdialog.
|
|
# libtermcap must be built before libcurses, libedit and libreadline.
|
|
#
|
|
# Some libraries are built conditionally and/or are in inconsistently
|
|
# named directories:
|
|
#
|
|
.if exists(lib/csu/${MACHINE_ARCH}.pcc)
|
|
_csu=lib/csu/${MACHINE_ARCH}.pcc
|
|
.elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
|
|
_csu=lib/csu/i386-elf
|
|
.else
|
|
_csu=lib/csu/${MACHINE_ARCH}
|
|
.endif
|
|
|
|
.if !defined(NOSECURE) && !defined(NOCRYPT)
|
|
_libcrypt= secure/lib/libcrypt lib/libcrypt
|
|
.else
|
|
_libcrypt= lib/libcrypt
|
|
.endif
|
|
|
|
.if defined(WANT_CSRG_LIBM)
|
|
_libm= lib/libm
|
|
.else
|
|
_libm= lib/msun
|
|
.endif
|
|
|
|
#
|
|
# bootstrap-libraries - build just enough libraries for the bootstrap
|
|
# tools, and install them under ${WORLDTMP}.
|
|
#
|
|
# Build csu and libgcc early so that some tools get linked to the new
|
|
# versions (too late for the main tools, however). Then build the
|
|
# necessary prerequisite libraries (libtermcap just needs to be before
|
|
# libcurses, and this only matters for the NOCLEAN case when NOPIC is
|
|
# not set).
|
|
#
|
|
# This is mostly wrong. The build tools must run on the host system,
|
|
# so they should use host libraries. We depend on the target being
|
|
# similar enough to the host for new target libraries to work on the
|
|
# host.
|
|
#
|
|
bootstrap-libraries:
|
|
.for _lib in ${_csu} gnu/usr.bin/cc/libgcc lib/libtermcap \
|
|
gnu/lib/libregex gnu/lib/libreadline lib/libc \
|
|
${_libcrypt} lib/libcurses lib/libedit ${_libm} \
|
|
lib/libmd lib/libutil lib/libz usr.bin/lex/lib \
|
|
gnu/usr.bin/perl/libperl
|
|
.if exists(${.CURDIR}/${_lib})
|
|
cd ${.CURDIR}/${_lib}; \
|
|
${MAKE} ${MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${MK_FLAGS} all; \
|
|
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
|
|
.endif
|
|
.endfor
|
|
|
|
#
|
|
# bootstrap-rtld - Build the shared library loader and install it
|
|
# under ${WORLDTMP}. This requires libc_pic which isn't normally
|
|
# bootstrapped, so libc has to be built again. *sigh*
|
|
#
|
|
RTLD_MK_FLAGS= -DNOINFO -DNOMAN -DNOPROFILE
|
|
bootstrap-rtld:
|
|
.if exists(${.CURDIR}/libexec/rtld-${OBJFORMAT})
|
|
cd ${.CURDIR}/lib/libc; \
|
|
${MAKE} ${RTLD_MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${RTLD_MK_FLAGS} all; \
|
|
${MAKE} ${RTLD_MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
|
|
cd ${.CURDIR}/libexec/rtld-${OBJFORMAT}; \
|
|
${MAKE} obj; \
|
|
${MAKE} ${RTLD_MK_FLAGS} ${_DEPEND}; \
|
|
${MAKE} ${RTLD_MK_FLAGS} all; \
|
|
${MAKE} ${RTLD_MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
|
|
.endif
|
|
|
|
#
|
|
# libraries - build all libraries, and install them under ${DESTDIR}.
|
|
#
|
|
# The ordering is not as special as for bootstrap-libraries. Build
|
|
# the prerequisites first, then build almost everything else in
|
|
# alphabetical order.
|
|
#
|
|
libraries:
|
|
.for _lib in lib/libcom_err ${_libcrypt} ${_libm} lib/libmytinfo \
|
|
lib/libncurses lib/libtermcap \
|
|
gnu/lib gnu/usr.bin/cc/libgcc lib usr.bin/lex/lib usr.sbin/pcvt/keycap
|
|
.if exists(${.CURDIR}/${_lib})
|
|
cd ${.CURDIR}/${_lib}; ${MAKE} all; ${MAKE} -B install
|
|
.endif
|
|
.endfor
|
|
.if exists(${.CURDIR}/secure/lib) && !defined(NOCRYPT) && !defined(NOSECURE)
|
|
cd ${.CURDIR}/secure/lib; ${MAKE} all; ${MAKE} -B install
|
|
.endif
|
|
.if exists(${.CURDIR}/kerberosIV/lib) && !defined(NOCRYPT) && \
|
|
defined(MAKE_KERBEROS4)
|
|
cd ${.CURDIR}/kerberosIV/lib; ${MAKE} all; ${MAKE} -B install
|
|
.endif
|
|
|
|
#
|
|
# Exclude unused tools from build-tools.
|
|
#
|
|
.if !defined(NOGAMES) && exists(${.CURDIR}/games)
|
|
_adventure= games/adventure
|
|
_caesar= games/caesar
|
|
_hack= games/hack
|
|
_phantasia= games/phantasia
|
|
_strfile= games/fortune/strfile
|
|
.endif
|
|
.if !defined(NOPERL)
|
|
_perl= gnu/usr.bin/perl/miniperl
|
|
.endif
|
|
.if !defined(NOSHARE) && exists(${.CURDIR}/share)
|
|
_scrnmaps= share/syscons/scrnmaps
|
|
.endif
|
|
.if !defined(NOLKM) && exists(${.CURDIR}/lkm) && ${OBJFORMAT} == "aout"
|
|
_linux= lkm/linux
|
|
.endif
|
|
.if ${OBJFORMAT} == "aout"
|
|
_netboot= sys/${MACHINE}/boot/netboot
|
|
.endif
|
|
|
|
BTMAKEFLAGS= ${MK_FLAGS} -D_BUILD_TOOLS
|
|
|
|
#
|
|
# build-tools - build and install any other tools needed to complete the
|
|
# compile and install.
|
|
# ifdef stale
|
|
# bc and cpp are required to build groff. Otherwise, the order here is
|
|
# mostly historical, i.e., bogus.
|
|
# chmod is used to build gcc's tmpmultilib[2] at obscure times.
|
|
# endif stale
|
|
# XXX uname is a bug - the target should not depend on the host.
|
|
#
|
|
build-tools:
|
|
.for d in \
|
|
bin/cat \
|
|
bin/chmod \
|
|
bin/cp \
|
|
bin/date \
|
|
bin/dd \
|
|
bin/echo \
|
|
bin/expr \
|
|
bin/hostname \
|
|
bin/ln \
|
|
bin/ls \
|
|
bin/mkdir \
|
|
bin/mv \
|
|
bin/rm \
|
|
bin/test \
|
|
${_caesar} \
|
|
${_strfile} \
|
|
gnu/usr.bin/awk \
|
|
gnu/usr.bin/bc \
|
|
gnu/usr.bin/grep \
|
|
gnu/usr.bin/groff \
|
|
gnu/usr.bin/gzip \
|
|
gnu/usr.bin/man/makewhatis \
|
|
gnu/usr.bin/patch \
|
|
${_perl} \
|
|
gnu/usr.bin/sort \
|
|
gnu/usr.bin/texinfo \
|
|
usr.bin/basename \
|
|
usr.bin/cap_mkdb \
|
|
usr.bin/chflags \
|
|
usr.bin/cmp \
|
|
usr.bin/col \
|
|
usr.bin/colldef \
|
|
usr.bin/cpp \
|
|
usr.bin/expand \
|
|
usr.bin/file2c \
|
|
usr.bin/find \
|
|
usr.bin/gencat \
|
|
usr.bin/id \
|
|
usr.bin/join \
|
|
usr.bin/lorder \
|
|
usr.bin/m4 \
|
|
usr.bin/mkdep \
|
|
usr.bin/mklocale \
|
|
usr.bin/paste \
|
|
usr.bin/sed \
|
|
${_aout_size} \
|
|
usr.bin/soelim \
|
|
usr.bin/symorder \
|
|
usr.bin/touch \
|
|
usr.bin/tr \
|
|
usr.bin/true \
|
|
usr.bin/uname \
|
|
usr.bin/uuencode \
|
|
usr.bin/vgrind \
|
|
usr.bin/vi \
|
|
usr.bin/wc \
|
|
usr.bin/xargs \
|
|
usr.bin/yacc \
|
|
usr.sbin/chown \
|
|
usr.sbin/mtree \
|
|
usr.sbin/zic \
|
|
bin/sh
|
|
cd ${.CURDIR}/$d; ${MAKE} ${BTMAKEFLAGS} ${_DEPEND}; \
|
|
${MAKE} ${BTMAKEFLAGS} all; \
|
|
${MAKE} ${BTMAKEFLAGS} -B install ${CLEANDIR} ${OBJDIR}
|
|
.endfor
|
|
.if !defined(NOGAMES) && exists(${.CURDIR}/games)
|
|
cd ${DESTDIR}/usr/games; cp -p caesar strfile ${DESTDIR}/usr/bin
|
|
.endif
|
|
.for d in \
|
|
bin/sh \
|
|
${_adventure} \
|
|
${_hack} \
|
|
${_phantasia} \
|
|
gnu/usr.bin/cc/cc_tools \
|
|
lib/libmytinfo \
|
|
${_linux} \
|
|
${_scrnmaps} \
|
|
${_netboot}
|
|
cd ${.CURDIR}/$d; ${MAKE} ${BTMAKEFLAGS} build-tools
|
|
.endfor
|
|
cd ${.CURDIR}/usr.bin/tn3270/tools; ${MAKE} ${BTMAKEFLAGS} all
|
|
|
|
#
|
|
# Build aout versions of things that provide legacy support when all the
|
|
# rest of the world is elf.
|
|
#
|
|
legacy-build:
|
|
.if ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "aout"
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Making hierarchy"
|
|
@echo "--------------------------------------------------------------"
|
|
mkdir -p ${WORLDTMP}
|
|
cd ${.CURDIR}; ${XMAKE} -f Makefile.inc1 hierarchy
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding the ${OBJFORMAT} obj tree"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; ${XMAKE} -f Makefile.inc1 par-${OBJDIR}
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Rebuilding ${DESTDIR}/usr/include"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; SHARED=copies ${XMAKE} -f Makefile.inc1 includes
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Building legacy libraries"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}; \
|
|
${XMAKE} -DNOINFO -DNOMAN -f Makefile.inc1 bootstrap-libraries
|
|
cd ${.CURDIR}; \
|
|
${XMAKE} -DNOINFO -DNOMAN -f Makefile.inc1 libraries
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Building legacy rtld"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/libexec/rtld-aout; \
|
|
${XMAKE} -DNOMAN depend; ${XMAKE} -DNOMAN all;
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Building legacy lkms"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/lkm; \
|
|
${XMAKE} -DNOMAN depend; ${XMAKE} -DNOMAN all;
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Building legacy boot"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/sys/${MACHINE}/boot; \
|
|
${XMAKE} -DNOMAN depend; ${XMAKE} -DNOMAN all;
|
|
.endif
|
|
|
|
#
|
|
# Install aout versions of things that provide legacy support when all the
|
|
# rest of the world is elf.
|
|
#
|
|
legacy-install:
|
|
.if ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "aout"
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Installing legacy libraries"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/lib; ${MAKE} -B -DNOMAN -DNOINFO install
|
|
cd ${.CURDIR}/gnu/lib; ${MAKE} -B -DNOMAN -DNOINFO install
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Installing legacy rtld"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/libexec/rtld-aout; ${MAKE} -DNOMAN install
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Installing legacy lkms"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/lkm; ${MAKE} -DNOMAN install
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo " Installing legacy boot"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${.CURDIR}/sys/${MACHINE}/boot; ${MAKE} -DNOMAN install
|
|
.endif
|
|
|
|
|
|
# Get the object format that the tools see.
|
|
#
|
|
#
|
|
.if exists(/usr/bin/objformat)
|
|
__OBJFORMAT!= objformat
|
|
.else
|
|
__OBJFORMAT= ${OBJFORMAT}
|
|
.endif
|
|
|
|
#
|
|
# Check if the local /etc/make.conf or /etc/make.conf.local have attempted
|
|
# to override the OBJFORMAT without updating the environment for the tools
|
|
# to see.
|
|
#
|
|
check-objformat :
|
|
.if ${__OBJFORMAT} != ${OBJFORMAT}
|
|
@/bin/sh -c "echo \"It looks like you set OBJFORMAT=${OBJFORMAT} in /etc/make.conf. Don't do that!\" "
|
|
@/bin/sh -c "echo \"If you want to override the installed object format, you must set OBJFORMAT\" "
|
|
@/bin/sh -c "echo \"in your environment.\" "
|
|
@exit 1
|
|
.endif
|
|
|
|
|
|
.for __target in clean cleandepend cleandir depend obj
|
|
.for entry in ${SUBDIR}
|
|
${entry}.${__target}__D: .PHONY
|
|
@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
|
|
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
|
|
edir=${entry}.${MACHINE_ARCH}; \
|
|
cd ${.CURDIR}/$${edir}; \
|
|
else \
|
|
${ECHODIR} "===> ${DIRPRFX}${entry}"; \
|
|
edir=${entry}; \
|
|
cd ${.CURDIR}/$${edir}; \
|
|
fi; \
|
|
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
|
|
.endfor
|
|
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
|
|
.endfor
|
|
|
|
.include <bsd.subdir.mk>
|