freebsd-dev/sys/net/if_ieee80211.h
phk 035bb622cd Currently, each wireless networking driver has it's own control program
despite the fact that most people want to set exactly the same settings
regardless of which card they have.  It has been repeatidly suggested
that this configuration should be done via ifconfig.  This patch
implements the required functionality in ifconfig and add support to the
wi and an drivers.  It also provides partial, untested support for the
awi driver.

PR:		25577
Submitted by:	Brooks Davis <brooks@one-eyed-alien.net>
2001-05-26 09:27:08 +00:00

272 lines
7.5 KiB
C

/* $NetBSD: if_ieee80211.h,v 1.5 2000/07/21 04:47:40 onoe Exp $ */
/* $FreeBSD$ */
#ifndef _NET_IF_IEEE80211_H_
#define _NET_IF_IEEE80211_H_
/*
* generic definitions for IEEE 802.11 frames
*/
struct ieee80211_frame {
u_int8_t i_fc[2];
u_int8_t i_dur[2];
u_int8_t i_addr1[ETHER_ADDR_LEN];
u_int8_t i_addr2[ETHER_ADDR_LEN];
u_int8_t i_addr3[ETHER_ADDR_LEN];
u_int8_t i_seq[2];
/* possibly followed by addr4[ETHER_ADDR_LEN]; */
};
#define IEEE80211_FC0_VERSION_MASK 0x03
#define IEEE80211_FC0_VERSION_0 0x00
#define IEEE80211_FC0_TYPE_MASK 0x0c
#define IEEE80211_FC0_TYPE_MGT 0x00
#define IEEE80211_FC0_TYPE_CTL 0x04
#define IEEE80211_FC0_TYPE_DATA 0x08
#define IEEE80211_FC0_SUBTYPE_MASK 0xf0
/* for TYPE_MGT */
#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ 0x00
#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP 0x10
#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ 0x20
#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP 0x30
#define IEEE80211_FC0_SUBTYPE_PROBE_REQ 0x40
#define IEEE80211_FC0_SUBTYPE_PROBE_RESP 0x50
#define IEEE80211_FC0_SUBTYPE_BEACON 0x80
#define IEEE80211_FC0_SUBTYPE_ATIM 0x90
#define IEEE80211_FC0_SUBTYPE_DISASSOC 0xa0
#define IEEE80211_FC0_SUBTYPE_AUTH 0xb0
#define IEEE80211_FC0_SUBTYPE_DEAUTH 0xc0
/* for TYPE_CTL */
#define IEEE80211_FC0_SUBTYPE_PS_POLL 0xa0
#define IEEE80211_FC0_SUBTYPE_RTS 0xb0
#define IEEE80211_FC0_SUBTYPE_CTS 0xc0
#define IEEE80211_FC0_SUBTYPE_ACK 0xd0
#define IEEE80211_FC0_SUBTYPE_CF_END 0xe0
#define IEEE80211_FC0_SUBTYPE_CF_END_ACK 0xf0
/* for TYPE_DATA (bit combination) */
#define IEEE80211_FC0_SUBTYPE_DATA 0x00
#define IEEE80211_FC0_SUBTYPE_CF_ACK 0x10
#define IEEE80211_FC0_SUBTYPE_CF_POLL 0x20
#define IEEE80211_FC0_SUBTYPE_CF_ACPL 0x30
#define IEEE80211_FC0_SUBTYPE_NODATA 0x40
#define IEEE80211_FC0_SUBTYPE_CFACK 0x50
#define IEEE80211_FC0_SUBTYPE_CFPOLL 0x60
#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70
#define IEEE80211_FC1_DIR_MASK 0x03
#define IEEE80211_FC1_DIR_NODS 0x00 /* STA->STA */
#define IEEE80211_FC1_DIR_TODS 0x01 /* STA->AP */
#define IEEE80211_FC1_DIR_FROMDS 0x02 /* AP ->STA */
#define IEEE80211_FC1_DIR_DSTODS 0x03 /* AP ->AP */
#define IEEE80211_FC1_MORE_FRAG 0x04
#define IEEE80211_FC1_RETRY 0x08
#define IEEE80211_FC1_PWR_MGT 0x10
#define IEEE80211_FC1_MORE_DATA 0x20
#define IEEE80211_FC1_WEP 0x40
#define IEEE80211_FC1_ORDER 0x80
#define IEEE80211_NWID_LEN 32
/*
* BEACON management packets
*
* octect timestamp[8]
* octect beacon interval[2]
* octect capability information[2]
* information element
* octect elemid
* octect length
* octect information[length[
*/
typedef u_int8_t * ieee80211_mgt_beacon_t;
#define IEEE80211_BEACON_INTERVAL(beacon) \
(beacon[8] + (beacon[9] << 8))
#define IEEE80211_BEACON_CAPABILITY(beacon) \
(beacon[10] + (beacon[11] << 8))
#define IEEE80211_CAPINFO_ESS 0x01
#define IEEE80211_CAPINFO_IBSS 0x02
#define IEEE80211_CAPINFO_CF_POLLABLE 0x04
#define IEEE80211_CAPINFO_CF_POLLREQ 0x08
#define IEEE80211_CAPINFO_PRIVACY 0x10
/*
* Management information elements
*/
struct ieee80211_information {
char ssid[IEEE80211_NWID_LEN+1];
struct rates {
u_int8_t *p;
} rates;
struct fh {
u_int16_t dwell;
u_int8_t set;
u_int8_t pattern;
u_int8_t index;
} fh;
struct ds {
u_int8_t channel;
} ds;
struct cf {
u_int8_t count;
u_int8_t period;
u_int8_t maxdur[2];
u_int8_t dur[2];
} cf;
struct tim {
u_int8_t count;
u_int8_t period;
u_int8_t bitctl;
/* u_int8_t pvt[251]; The driver never needs to use this */
} tim;
struct ibss {
u_int16_t atim;
} ibss;
struct challenge {
u_int8_t *p;
u_int8_t len;
} challenge;
};
#define IEEE80211_ELEMID_SSID 0
#define IEEE80211_ELEMID_RATES 1
#define IEEE80211_ELEMID_FHPARMS 2
#define IEEE80211_ELEMID_DSPARMS 3
#define IEEE80211_ELEMID_CFPARMS 4
#define IEEE80211_ELEMID_TIM 5
#define IEEE80211_ELEMID_IBSSPARMS 6
#define IEEE80211_ELEMID_CHALLENGE 16
/*
* AUTH management packets
*
* octect algo[2]
* octect seq[2]
* octect status[2]
* octect chal.id
* octect chal.length
* octect chal.text[253]
*/
typedef u_int8_t * ieee80211_mgt_auth_t;
#define IEEE80211_AUTH_ALGORITHM(auth) \
(auth[0] + (auth[1] << 8))
#define IEEE80211_AUTH_TRANSACTION(auth) \
(auth[2] + (auth[3] << 8))
#define IEEE80211_AUTH_STATUS(auth) \
(auth[4] + (auth[5] << 8))
#define IEEE80211_AUTH_ALG_OPEN 0x0000
#define IEEE80211_AUTH_ALG_SHARED 0x0001
#define IEEE80211_AUTH_OPEN_REQUEST 1
#define IEEE80211_AUTH_OPEN_RESPONSE 2
#define IEEE80211_AUTH_SHARED_REQUEST 1
#define IEEE80211_AUTH_SHARED_CHALLENGE 2
#define IEEE80211_AUTH_SHARED_RESPONSE 3
#define IEEE80211_AUTH_SHARED_PASS 4
/*
* Reason codes
*
* Unlisted codes are reserved
*/
#define IEEE80211_REASON_UNSPECIFIED 1
#define IEEE80211_REASON_AUTH_EXPIRE 2
#define IEEE80211_REASON_AUTH_LEAVE 3
#define IEEE80211_REASON_ASSOC_EXPIRE 4
#define IEEE80211_REASON_ASSOC_TOOMANY 5
#define IEEE80211_REASON_NOT_AUTHED 6
#define IEEE80211_REASON_NOT_ASSOCED 7
#define IEEE80211_REASON_ASSOC_LEAVE 8
#define IEEE80211_REASON_ASSOC_NOT_AUTHED 9
/*
* Status code
*
* Unlisted codes are reserved
*/
#define IEEE80211_STATUS_SUCCESS 0x0000
#define IEEE80211_STATUS_UNSPECIFIED 1
#define IEEE80211_STATUS_CAPINFO 10
#define IEEE80211_STATUS_NOT_ASSOCED 11
#define IEEE80211_STATUS_OTHER 12
#define IEEE80211_STATUS_ALG 13
#define IEEE80211_STATUS_SEQUENCE 14
#define IEEE80211_STATUS_CHALLENGE 15
#define IEEE80211_STATUS_TIMEOUT 16
#define IEEE80211_WEP_KEYLEN 5 /* 40bit */
#define IEEE80211_WEP_IVLEN 3 /* 24bit */
#define IEEE80211_WEP_KIDLEN 1 /* 1 octet */
#define IEEE80211_WEP_CRCLEN 4 /* CRC-32 */
#define IEEE80211_WEP_NKID 4 /* number of key ids */
/* nwid is pointed at by ifr.ifr_data */
struct ieee80211_nwid {
u_int8_t i_len;
u_int8_t i_nwid[IEEE80211_NWID_LEN];
};
#define SIOCS80211NWID _IOWR('i', 230, struct ifreq)
#define SIOCG80211NWID _IOWR('i', 231, struct ifreq)
/* the first member must be matched with struct ifreq */
struct ieee80211_nwkey {
char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */
int i_wepon; /* wep enabled flag */
int i_defkid; /* default encrypt key id */
struct {
int i_keylen;
u_int8_t *i_keydat;
} i_key[IEEE80211_WEP_NKID];
};
#define SIOCS80211NWKEY _IOW('i', 232, struct ieee80211_nwkey)
#define SIOCG80211NWKEY _IOWR('i', 233, struct ieee80211_nwkey)
#define IEEE80211_WEP_NOSUP -1
#define IEEE80211_WEP_OFF 0
#define IEEE80211_WEP_ON 1
#define IEEE80211_WEP_MIXED 2
#define IEEE80211_AUTH_NONE 0
#define IEEE80211_AUTH_OPEN 1
#define IEEE80211_AUTH_SHARED 2
#define IEEE80211_POWERSAVE_NOSUP -1
#define IEEE80211_POWERSAVE_OFF 0
#define IEEE80211_POWERSAVE_CAM 1
#define IEEE80211_POWERSAVE_PSP 2
#define IEEE80211_POWERSAVE_PSP_CAM 3
#define IEEE80211_POWERSAVE_ON IEEE80211_POWERSAVE_CAM
/* the first member must be matched with struct ifreq */
struct ieee80211req {
char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */
u_int16_t i_type; /* req type */
int16_t i_val; /* Index or simple value */
int16_t i_len; /* Index or simple value */
void *i_data; /* Extra data */
};
#define SIOCS80211 _IOW('i', 234, struct ieee80211req)
#define SIOCG80211 _IOWR('i', 235, struct ieee80211req)
#define IEEE80211_IOC_SSID 1
#define IEEE80211_IOC_NUMSSIDS 2
#define IEEE80211_IOC_WEP 3
#define IEEE80211_IOC_WEPKEY 4
#define IEEE80211_IOC_NUMWEPKEYS 5
#define IEEE80211_IOC_WEPTXKEY 6
#define IEEE80211_IOC_AUTHMODE 7
#define IEEE80211_IOC_STATIONNAME 8
#define IEEE80211_IOC_CHANNEL 9
#define IEEE80211_IOC_POWERSAVE 10
#define IEEE80211_IOC_POWERSAVESLEEP 11
#endif /* !_NET_IF_IEEE80211_H_ */