freebsd-dev/sys/dev/ppbus/ppbconf.h
Nicolas Souchu 0f210c922b Port of ppbus standalone framework to the newbus system.
Note1: the correct interrupt level is invoked correctly for each driver.
       For this purpose, drivers request the bus before being able to
       call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus
       core when drivers release it. Thus, when BUS_SETUP_INTR is called
       at ppbus driver level, ppbus checks that the caller owns the
       bus and stores the interrupt handler cookie (in order to unregister
       it later).

       Printing is impossible while plip link is up is still TRUE.
       vpo (ZIP driver) and lpt are make in such a way that
       using the ZIP and printing concurrently is permitted is also TRUE.

Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET
       is now needed to force chipset detection. If set, the flags 0x40
       still avoid detection at boot.

Port of the pcf(4) driver to the newbus system (was previously directly
connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00

275 lines
6.9 KiB
C

/*-
* Copyright (c) 1997, 1998, 1999 Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*
*/
#ifndef __PPBCONF_H
#define __PPBCONF_H
#include <sys/queue.h>
/*
* Parallel Port Bus sleep/wakeup queue.
*/
#define PPBPRI (PZERO+8)
/*
* Parallel Port Chipset mode masks.
* NIBBLE mode is supposed to be available under each other modes.
*/
#define PPB_COMPATIBLE 0x0 /* Centronics compatible mode */
#define PPB_NIBBLE 0x1 /* reverse 4 bit mode */
#define PPB_PS2 0x2 /* PS/2 byte mode */
#define PPB_EPP 0x4 /* EPP mode, 32 bit */
#define PPB_ECP 0x8 /* ECP mode */
/* mode aliases */
#define PPB_SPP PPB_NIBBLE|PPB_PS2
#define PPB_BYTE PPB_PS2
#define PPB_MASK 0x0f
#define PPB_OPTIONS_MASK 0xf0
#define PPB_IS_EPP(mode) (mode & PPB_EPP)
#define PPB_IN_EPP_MODE(bus) (PPB_IS_EPP (ppb_get_mode (bus)))
#define PPB_IN_NIBBLE_MODE(bus) (ppb_get_mode (bus) & PPB_NIBBLE)
#define PPB_IN_PS2_MODE(bus) (ppb_get_mode (bus) & PPB_PS2)
#define n(flags) (~(flags) & (flags))
/*
* Parallel Port Chipset control bits.
*/
#define STROBE 0x01
#define AUTOFEED 0x02
#define nINIT 0x04
#define SELECTIN 0x08
#define IRQENABLE 0x10
#define PCD 0x20
#define nSTROBE n(STROBE)
#define nAUTOFEED n(AUTOFEED)
#define INIT n(nINIT)
#define nSELECTIN n(SELECTIN)
#define nPCD n(PCD)
/*
* Parallel Port Chipset status bits.
*/
#define TIMEOUT 0x01
#define nFAULT 0x08
#define SELECT 0x10
#define PERROR 0x20
#define nACK 0x40
#define nBUSY 0x80
/*
* Structure to store status information.
*/
struct ppb_status {
unsigned char status;
unsigned int timeout:1;
unsigned int error:1;
unsigned int select:1;
unsigned int paper_end:1;
unsigned int ack:1;
unsigned int busy:1;
};
/* Parallel port bus I/O opcodes */
#define PPB_OUTSB_EPP 1
#define PPB_OUTSW_EPP 2
#define PPB_OUTSL_EPP 3
#define PPB_INSB_EPP 4
#define PPB_INSW_EPP 5
#define PPB_INSL_EPP 6
#define PPB_RDTR 7
#define PPB_RSTR 8
#define PPB_RCTR 9
#define PPB_REPP_A 10
#define PPB_REPP_D 11
#define PPB_RECR 12
#define PPB_RFIFO 13
#define PPB_WDTR 14
#define PPB_WSTR 15
#define PPB_WCTR 16
#define PPB_WEPP_A 17
#define PPB_WEPP_D 18
#define PPB_WECR 19
#define PPB_WFIFO 20
/*
* How tsleep() is called in ppb_request_bus().
*/
#define PPB_DONTWAIT 0
#define PPB_NOINTR 0
#define PPB_WAIT 0x1
#define PPB_INTR 0x2
#define PPB_POLL 0x4
#define PPB_FOREVER -1
/*
* Microsequence stuff.
*/
#define PPB_MS_MAXLEN 64 /* XXX according to MS_INS_MASK */
#define PPB_MS_MAXARGS 3 /* according to MS_ARG_MASK */
/* maximum number of mode dependent
* submicrosequences for in/out operations
*/
#define PPB_MAX_XFER 6
union ppb_insarg {
int i;
void *p;
char *c;
int (* f)(void *, char *);
};
struct ppb_microseq {
int opcode; /* microins. opcode */
union ppb_insarg arg[PPB_MS_MAXARGS]; /* arguments */
};
/* microseqences used for GET/PUT operations */
struct ppb_xfer {
struct ppb_microseq *loop; /* the loop microsequence */
};
/*
* Parallel Port Bus Device structure.
*/
struct ppb_data; /* see below */
struct ppb_context {
int valid; /* 1 if the struct is valid */
int mode; /* XXX chipset operating mode */
struct microseq *curpc; /* pc in curmsq */
struct microseq *curmsq; /* currently executed microseqence */
};
/*
* List of IVARS available to ppb device drivers
*/
#define PPBUS_IVAR_MODE 0
#define PPBUS_IVAR_AVM 1
#define PPBUS_IVAR_IRQ 2
/* other fields are reserved to the ppbus internals */
struct ppb_device {
const char *name; /* name of the device */
ushort mode; /* current mode of the device */
ushort avm; /* available IEEE1284 modes of
* the device */
uint flags; /* flags */
struct ppb_context ctx; /* context of the device */
/* mode dependent get msq. If NULL,
* IEEE1284 code is used */
struct ppb_xfer
get_xfer[PPB_MAX_XFER];
/* mode dependent put msq. If NULL,
* IEEE1284 code is used */
struct ppb_xfer
put_xfer[PPB_MAX_XFER];
struct resource *intr_resource;
void *intr_cookie;
void *drv1, *drv2; /* drivers private data */
};
/* EPP standards */
#define EPP_1_9 0x0 /* default */
#define EPP_1_7 0x1
/* Parallel Port Chipset IVARS */ /* elsewhere XXX */
#define PPC_IVAR_EPP_PROTO 0
#define PPC_IVAR_IRQ 1
/*
* Maximum size of the PnP info string
*/
#define PPB_PnP_STRING_SIZE 256 /* XXX */
/*
* Parallel Port Bus structure.
*/
struct ppb_data {
#define PPB_PnP_PRINTER 0
#define PPB_PnP_MODEM 1
#define PPB_PnP_NET 2
#define PPB_PnP_HDC 3
#define PPB_PnP_PCMCIA 4
#define PPB_PnP_MEDIA 5
#define PPB_PnP_FDC 6
#define PPB_PnP_PORTS 7
#define PPB_PnP_SCANNER 8
#define PPB_PnP_DIGICAM 9
#define PPB_PnP_UNKNOWN 10
int class_id; /* not a PnP device if class_id < 0 */
int state; /* current IEEE1284 state */
int error; /* last IEEE1284 error */
int mode; /* IEEE 1284-1994 mode
* NIBBLE, PS2, EPP or ECP */
void *ppb_owner; /* device which owns the bus */
};
extern int ppb_attach_device(device_t);
extern int ppb_request_bus(device_t, device_t, int);
extern int ppb_release_bus(device_t, device_t);
/* bus related functions */
extern int ppb_get_status(device_t, struct ppb_status *);
extern int ppb_poll_bus(device_t, int, char, char, int);
extern int ppb_reset_epp_timeout(device_t);
extern int ppb_ecp_sync(device_t);
extern int ppb_get_epp_protocol(device_t);
extern int ppb_set_mode(device_t, int); /* returns old mode */
extern int ppb_get_mode(device_t); /* returns current mode */
extern int ppb_write(device_t, char *, int, int);
/*
* These are defined as macros for speedup.
#define ppb_get_base_addr(dev) ((dev)->ppb->ppb_link->base)
#define ppb_get_epp_protocol(dev) ((dev)->ppb->ppb_link->epp_protocol)
#define ppb_get_irq(dev) ((dev)->ppb->ppb_link->id_irq)
*/
#endif