freebsd-dev/contrib/ntp/Makefile.in
Cy Schubert a25439b686 MFV ntp 4.2.8p2 (r281348)
Reviewed by:    delphij (suggested MFC)
Approved by:	roberto
Security:       CVE-2015-1798, CVE-2015-1799
Security:       VuXML ebd84c96-dd7e-11e4-854e-3c970e169bc2
MFC after:	1 month
2015-05-04 04:45:59 +00:00

1077 lines
32 KiB
Makefile

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure ChangeLog INSTALL NEWS TODO compile \
config.guess config.sub depcomp install-sh ltmain.sh missing \
sntp/libevent/build-aux/compile \
sntp/libevent/build-aux/config.guess \
sntp/libevent/build-aux/config.sub \
sntp/libevent/build-aux/depcomp \
sntp/libevent/build-aux/install-sh \
sntp/libevent/build-aux/ltmain.sh \
sntp/libevent/build-aux/missing sntp/libevent/build-aux/ylwrap \
ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/sntp/libopts/m4/libopts.m4 \
$(top_srcdir)/sntp/libopts/m4/stdnoreturn.m4 \
$(top_srcdir)/sntp/m4/ax_c99_struct_init.m4 \
$(top_srcdir)/sntp/m4/define_dir.m4 \
$(top_srcdir)/sntp/m4/hms_search_lib.m4 \
$(top_srcdir)/sntp/m4/libtool.m4 \
$(top_srcdir)/sntp/m4/ltoptions.m4 \
$(top_srcdir)/sntp/m4/ltsugar.m4 \
$(top_srcdir)/sntp/m4/ltversion.m4 \
$(top_srcdir)/sntp/m4/lt~obsolete.m4 \
$(top_srcdir)/sntp/m4/ntp_cacheversion.m4 \
$(top_srcdir)/sntp/m4/ntp_compiler.m4 \
$(top_srcdir)/sntp/m4/ntp_crosscompile.m4 \
$(top_srcdir)/sntp/m4/ntp_crypto_rand.m4 \
$(top_srcdir)/sntp/m4/ntp_debug.m4 \
$(top_srcdir)/sntp/m4/ntp_dir_sep.m4 \
$(top_srcdir)/sntp/m4/ntp_facilitynames.m4 \
$(top_srcdir)/sntp/m4/ntp_googletest.m4 \
$(top_srcdir)/sntp/m4/ntp_ipv6.m4 \
$(top_srcdir)/sntp/m4/ntp_lib_m.m4 \
$(top_srcdir)/sntp/m4/ntp_libevent.m4 \
$(top_srcdir)/sntp/m4/ntp_libntp.m4 \
$(top_srcdir)/sntp/m4/ntp_lineeditlibs.m4 \
$(top_srcdir)/sntp/m4/ntp_locinfo.m4 \
$(top_srcdir)/sntp/m4/ntp_openssl.m4 \
$(top_srcdir)/sntp/m4/ntp_pkg_config.m4 \
$(top_srcdir)/sntp/m4/ntp_prog_cc.m4 \
$(top_srcdir)/sntp/m4/ntp_rlimit.m4 \
$(top_srcdir)/sntp/m4/ntp_sntp.m4 \
$(top_srcdir)/sntp/m4/ntp_ver_suffix.m4 \
$(top_srcdir)/sntp/m4/ntp_vpathhack.m4 \
$(top_srcdir)/sntp/m4/openldap-thread-check.m4 \
$(top_srcdir)/sntp/m4/openldap.m4 \
$(top_srcdir)/sntp/m4/os_cflags.m4 \
$(top_srcdir)/sntp/m4/snprintf.m4 \
$(top_srcdir)/sntp/m4/version.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d "$(distdir)" \
|| { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr "$(distdir)"; }; }
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CALC_TICKADJ_DB = @CALC_TICKADJ_DB@
CALC_TICKADJ_DL = @CALC_TICKADJ_DL@
CALC_TICKADJ_DS = @CALC_TICKADJ_DS@
CALC_TICKADJ_MS = @CALC_TICKADJ_MS@
CALC_TICKADJ_NI = @CALC_TICKADJ_NI@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAGS_NTP = @CFLAGS_NTP@
CHUTEST = @CHUTEST@
CONFIG_SHELL = @CONFIG_SHELL@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPPFLAGS_LIBEVENT = @CPPFLAGS_LIBEVENT@
CPPFLAGS_NTP = @CPPFLAGS_NTP@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DCFD = @DCFD@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EDITLINE_LIBS = @EDITLINE_LIBS@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
GTEST_CONFIG = @GTEST_CONFIG@
GTEST_CPPFLAGS = @GTEST_CPPFLAGS@
GTEST_CXXFLAGS = @GTEST_CXXFLAGS@
GTEST_LDFLAGS = @GTEST_LDFLAGS@
GTEST_LIBS = @GTEST_LIBS@
HAVE_INLINE = @HAVE_INLINE@
HAVE_RLIMIT_MEMLOCK = @HAVE_RLIMIT_MEMLOCK@
HAVE_RLIMIT_STACK = @HAVE_RLIMIT_STACK@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDADD_LIBEVENT = @LDADD_LIBEVENT@
LDADD_LIBNTP = @LDADD_LIBNTP@
LDADD_LIBUTIL = @LDADD_LIBUTIL@
LDADD_NLIST = @LDADD_NLIST@
LDADD_NTP = @LDADD_NTP@
LDFLAGS = @LDFLAGS@
LDFLAGS_NTP = @LDFLAGS_NTP@
LIBISC_PTHREADS_NOTHREADS = @LIBISC_PTHREADS_NOTHREADS@
LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
LIBOPTS_DIR = @LIBOPTS_DIR@
LIBOPTS_LDADD = @LIBOPTS_LDADD@
LIBPARSE = @LIBPARSE@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBTOOL_DEPS = @LIBTOOL_DEPS@
LIPO = @LIPO@
LN_S = @LN_S@
LSCF = @LSCF@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_ADJTIMED = @MAKE_ADJTIMED@
MAKE_CHECK_LAYOUT = @MAKE_CHECK_LAYOUT@
MAKE_CHECK_Y2K = @MAKE_CHECK_Y2K@
MAKE_LIBNTPSIM = @MAKE_LIBNTPSIM@
MAKE_LIBPARSE = @MAKE_LIBPARSE@
MAKE_LIBPARSE_KERNEL = @MAKE_LIBPARSE_KERNEL@
MAKE_NTPDSIM = @MAKE_NTPDSIM@
MAKE_NTPSNMPD = @MAKE_NTPSNMPD@
MAKE_NTPTIME = @MAKE_NTPTIME@
MAKE_PARSEKMODULE = @MAKE_PARSEKMODULE@
MAKE_TICKADJ = @MAKE_TICKADJ@
MAKE_TIMETRIM = @MAKE_TIMETRIM@
MANIFEST_TOOL = @MANIFEST_TOOL@
MANTAGFMT = @MANTAGFMT@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NTPDATE_DB = @NTPDATE_DB@
NTPDATE_DL = @NTPDATE_DL@
NTPDATE_DS = @NTPDATE_DS@
NTPDATE_MS = @NTPDATE_MS@
NTPDATE_NI = @NTPDATE_NI@
NTPDC_DB = @NTPDC_DB@
NTPDC_DL = @NTPDC_DL@
NTPDC_DS = @NTPDC_DS@
NTPDC_MS = @NTPDC_MS@
NTPDC_NI = @NTPDC_NI@
NTPDSIM_DB = @NTPDSIM_DB@
NTPDSIM_DL = @NTPDSIM_DL@
NTPDSIM_DS = @NTPDSIM_DS@
NTPDSIM_MS = @NTPDSIM_MS@
NTPDSIM_NI = @NTPDSIM_NI@
NTPD_DB = @NTPD_DB@
NTPD_DL = @NTPD_DL@
NTPD_DS = @NTPD_DS@
NTPD_MS = @NTPD_MS@
NTPD_NI = @NTPD_NI@
NTPQ_DB = @NTPQ_DB@
NTPQ_DL = @NTPQ_DL@
NTPQ_DS = @NTPQ_DS@
NTPQ_MS = @NTPQ_MS@
NTPQ_NI = @NTPQ_NI@
NTPSNMPD_DB = @NTPSNMPD_DB@
NTPSNMPD_DL = @NTPSNMPD_DL@
NTPSNMPD_DS = @NTPSNMPD_DS@
NTPSNMPD_MS = @NTPSNMPD_MS@
NTPSNMPD_NI = @NTPSNMPD_NI@
NTPSWEEP_DB = @NTPSWEEP_DB@
NTPSWEEP_DL = @NTPSWEEP_DL@
NTPSWEEP_DS = @NTPSWEEP_DS@
NTPSWEEP_MS = @NTPSWEEP_MS@
NTPSWEEP_NI = @NTPSWEEP_NI@
NTPTIME_DB = @NTPTIME_DB@
NTPTIME_DL = @NTPTIME_DL@
NTPTIME_DS = @NTPTIME_DS@
NTPTIME_MS = @NTPTIME_MS@
NTPTIME_NI = @NTPTIME_NI@
NTPTRACE_DB = @NTPTRACE_DB@
NTPTRACE_DL = @NTPTRACE_DL@
NTPTRACE_DS = @NTPTRACE_DS@
NTPTRACE_MS = @NTPTRACE_MS@
NTPTRACE_NI = @NTPTRACE_NI@
NTP_KEYGEN_DB = @NTP_KEYGEN_DB@
NTP_KEYGEN_DL = @NTP_KEYGEN_DL@
NTP_KEYGEN_DS = @NTP_KEYGEN_DS@
NTP_KEYGEN_MS = @NTP_KEYGEN_MS@
NTP_KEYGEN_NI = @NTP_KEYGEN_NI@
NTP_KEYSDIR = @NTP_KEYSDIR@
NTP_WAIT_DB = @NTP_WAIT_DB@
NTP_WAIT_DL = @NTP_WAIT_DL@
NTP_WAIT_DS = @NTP_WAIT_DS@
NTP_WAIT_MS = @NTP_WAIT_MS@
NTP_WAIT_NI = @NTP_WAIT_NI@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_NET_SNMP_CONFIG = @PATH_NET_SNMP_CONFIG@
PATH_PERL = @PATH_PERL@
PATH_SEPARATOR = @PATH_SEPARATOR@
PATH_TEST = @PATH_TEST@
PERLLIBDIR = @PERLLIBDIR@
PKG_CONFIG = @PKG_CONFIG@
POSIX_SHELL = @POSIX_SHELL@
PROPDELAY = @PROPDELAY@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SNMP_CFLAGS = @SNMP_CFLAGS@
SNMP_CPPFLAGS = @SNMP_CPPFLAGS@
SNMP_LIBS = @SNMP_LIBS@
SNTP = @SNTP@
SNTP_DB = @SNTP_DB@
SNTP_DL = @SNTP_DL@
SNTP_DS = @SNTP_DS@
SNTP_MS = @SNTP_MS@
SNTP_NI = @SNTP_NI@
STDNORETURN_H = @STDNORETURN_H@
STRIP = @STRIP@
TESTDCF = @TESTDCF@
TICKADJ_DB = @TICKADJ_DB@
TICKADJ_DL = @TICKADJ_DL@
TICKADJ_DS = @TICKADJ_DS@
TICKADJ_MS = @TICKADJ_MS@
TICKADJ_NI = @TICKADJ_NI@
TIMETRIM_DB = @TIMETRIM_DB@
TIMETRIM_DL = @TIMETRIM_DL@
TIMETRIM_DS = @TIMETRIM_DS@
TIMETRIM_MS = @TIMETRIM_MS@
TIMETRIM_NI = @TIMETRIM_NI@
UPDATE_LEAP_DB = @UPDATE_LEAP_DB@
UPDATE_LEAP_DL = @UPDATE_LEAP_DL@
UPDATE_LEAP_DS = @UPDATE_LEAP_DS@
UPDATE_LEAP_MS = @UPDATE_LEAP_MS@
UPDATE_LEAP_NI = @UPDATE_LEAP_NI@
VERSION = @VERSION@
VER_SUFFIX = @VER_SUFFIX@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I sntp/m4 -I sntp/libevent/m4 -I sntp/libopts/m4
NULL =
# moved sntp first to get libtool and libevent built.
SUBDIRS = \
sntp \
scripts \
include \
libntp \
libparse \
ntpd \
ntpdate \
ntpdc \
ntpq \
ntpsnmpd \
parseutil \
adjtimed \
clockstuff \
kernel \
util \
tests \
$(NULL)
DISTCHECK_CONFIGURE_FLAGS = -C --with-sntp
EXTRA_DIST = \
$(srcdir)/COPYRIGHT \
ChangeLog \
CommitLog \
CommitLog-4.1.0 \
NEWS \
NOTES.y2kfixes \
README.bk \
README.hackers \
README.patches \
README.refclocks \
README.versions \
TODO \
WHERE-TO-START \
bootstrap \
build \
config.h.in \
dot.emacs \
flock-build \
packageinfo.sh \
readme.y2kfixes \
results.y2kfixes \
\
conf \
html \
lib/isc \
libjsmn \
ports \
\
deps-ver \
\
$(NULL)
CLEANFILES =
DISTCLEANFILES = .gcc-warning
# HMS: Keep .gcc-warning first, as that way it gets printed first.
BUILT_SOURCES = \
.gcc-warning \
libtool \
html/.datecheck \
$(srcdir)/COPYRIGHT \
$(srcdir)/.checkChangeLog \
$(NULL)
# HMS: The following seems to be a work-in-progress...
CVO = `$(srcdir)/sntp/libevent/build-aux/config.guess`
BHOST = `(hostname || uname -n)`
all: $(BUILT_SOURCES) config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@$(am__cd) '$(distuninstallcheck_dir)' \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-data-local
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-local
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
ctags-recursive install install-am install-strip \
tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
dist-zip distcheck distclean distclean-generic distclean-hdr \
distclean-libtool distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am \
install-data-local install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-local
.gcc-warning:
@echo "Compiling with GCC now generates lots of new warnings."
@echo " "
@echo "Don't be concerned. They're just warnings."
@echo " "
@echo "Don't send bug reports about the warnings, either."
@echo " "
@echo "Feel free to send patches that fix these warnings, though."
@echo " "
@sleep 1
@touch $@
html/.datecheck: FRC.html
cd $(srcdir)/html && \
../scripts/build/checkHtmlFileDates
libtool: $(LIBTOOL_DEPS)
./config.status --recheck
sntp/built-sources-only: FRC.sntp
@cd sntp && $(MAKE) $(AM_MAKEFLAGS) built-sources-only
$(srcdir)/COPYRIGHT: $(srcdir)/html/copyright.html
{ echo "This file is automatically generated from html/copyright.html" ; \
lynx -dump $(srcdir)/html/copyright.html ;} > COPYRIGHT.new \
&& mv -f COPYRIGHT.new $(srcdir)/COPYRIGHT
COPYRIGHT-please: $(srcdir)/COPYRIGHT
@: do-nothing action to prevent default \
This target is needed by sntp/Makefile.am on decrepit \
FreeBSD 6.x make which fails with "make COPYRIGHT" \
configured in $(srcdir) but "make ./COPYRIGHT" succeeds. \
Rather than determine our $(srcdir) from sntp/Makefile.am \
COPYRIGHT-please serves as a fixed target.
$(srcdir)/.checkChangeLog: $(srcdir)/ChangeLog $(srcdir)/scripts/build/checkChangeLog
cd $(srcdir) && \
./scripts/build/checkChangeLog
dist-hook:
@find $(distdir) -type d -name SCCS -print | xargs rm -rf
install-data-local:
( cd $(srcdir) && find html -name SCCS -prune -o -type d \
-exec $(INSTALL) -d $(DESTDIR)$(htmldir)/{} ";" )
( cd $(srcdir) && find html -name SCCS -prune -o -type f \
-exec $(INSTALL_DATA) {} $(DESTDIR)$(htmldir)/{} ";" )
uninstall-local:
rm -rf $(DESTDIR)$(htmldir)/html
CommitLog: FRC.CommitLog
cd $(srcdir) \
&& $(PATH_TEST) -e CommitLog \
-a SCCS/s.ChangeSet -ot CommitLog \
|| scripts/build/genCommitLog
.buildcvo:
echo "$(CVO)" > .buildcvo
.checkcvo: .buildcvo FRC.checkcvo
@if [ "`cat .buildcvo`" != "$(CVO)" ];then \
echo "This directory was configured for `cat .buildcvo`"; \
echo "but this machine is a $(CVO)"; \
exit 1; \
fi
.buildhost:
echo "$(BHOST)" > .buildhost
.checkhost: .buildhost FRC.checkhost
@if [ "`cat .buildhost`" != "$(BHOST)" ];then \
echo "Built on `cat .buildhost` but this is $(BHOST)"; \
echo " "; \
fi
FRC.CommitLog FRC.checkcvo FRC.checkhost FRC.distwarn FRC.html FRC.sntp:
@: do-nothing action prevents any default
# HMS: what was I trying to do with this?
#dot.emacs: FRC.distwarn
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: