freebsd-dev/sys/dev/si/sivar.h
Poul-Henning Kamp 80e6a01a9a Add #ifdef _KERNEL which allows sicontrol(8) to include this file
from userland to get the debugging definitions.
2004-10-02 18:49:29 +00:00

114 lines
3.2 KiB
C

/*
* Device driver for Specialix range (SI/XIO) of serial line multiplexors.
*
* Copyright (C) 2000, Peter Wemm <peter@netplex.com.au>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notices, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notices, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHORS BE LIABLE.
*
* $FreeBSD$
*/
#ifdef _KERNEL
int siattach(device_t dev);
void si_intr(void *);
extern devclass_t si_devclass;
/* where the firmware lives; defined in si2_z280.c and si3_t225.c */
/* old: si2_z280.c */
extern unsigned char si2_z280_download[];
extern unsigned short si2_z280_downloadaddr;
extern int si2_z280_dsize;
/* new: si3_t225.c */
extern unsigned char si3_t225_download[];
extern unsigned short si3_t225_downloadaddr;
extern int si3_t225_dsize;
extern unsigned char si3_t225_bootstrap[];
extern unsigned short si3_t225_bootloadaddr;
extern int si3_t225_bsize;
struct si_softc {
int sc_type; /* adapter type */
const char *sc_typename; /* adapter type string */
struct si_port *sc_ports; /* port structures for this card */
caddr_t sc_paddr; /* physical addr of iomem */
caddr_t sc_maddr; /* kvaddr of iomem */
int sc_nport; /* # ports on this card */
int sc_irq; /* copy of attach irq */
int sc_iobase; /* EISA io port address */
struct resource *sc_port_res;
struct resource *sc_irq_res;
struct resource *sc_mem_res;
int sc_port_rid;
int sc_irq_rid;
int sc_mem_rid;
int sc_memsize;
};
#endif /* _KERNEL */
#ifdef SI_DEBUG
/*
* debugging stuff - manipulated using siconfig(8)
*/
void si_dprintf(struct si_port *pp, int flags, const char *fmt, ...);
#define DPRINT(x) si_dprintf x
/*
* Extensive debugging stuff - manipulated using siconfig(8)
*/
#define DBG_ENTRY 0x00000001
#define DBG_DRAIN 0x00000002
#define DBG_OPEN 0x00000004
#define DBG_CLOSE 0x00000008
#define DBG_READ 0x00000010
#define DBG_WRITE 0x00000020
#define DBG_PARAM 0x00000040
#define DBG_INTR 0x00000080
#define DBG_IOCTL 0x00000100
/* 0x00000200 */
#define DBG_SELECT 0x00000400
#define DBG_OPTIM 0x00000800
#define DBG_START 0x00001000
#define DBG_EXIT 0x00002000
#define DBG_FAIL 0x00004000
#define DBG_STOP 0x00008000
#define DBG_AUTOBOOT 0x00010000
#define DBG_MODEM 0x00020000
#define DBG_DOWNLOAD 0x00040000
#define DBG_LSTART 0x00080000
#define DBG_POLL 0x00100000
#define DBG_ALL 0xffffffff
#else
#define DPRINT(x) /* void */
#endif
/* Adapter types */
#define SIEMPTY 0
#define SIHOST 1
#define SIMCA 2
#define SIHOST2 3
#define SIEISA 4
#define SIPCI 5
#define SIJETPCI 6
#define SIJETISA 7
#define SI_ISJET(x) (((x) == SIJETPCI) || ((x) == SIJETISA))