freebsd-dev/Makefile
Bruce Evans fba6da925d Fully enable the optimization of not building dependencies unless NOCLEAN
is set.  It was disabled in the -j case.  See rev.1.173.
1998-08-04 17:13:38 +00:00

877 lines
27 KiB
Makefile

#
# $Id: Makefile,v 1.208 1998/08/04 16:00:47 peter Exp $
#
# While porting to the another architecture include the bootstrap instead
# of the normal build.
#
.if exists(${.CURDIR}/Makefile.${MACHINE}) && defined(BOOTSTRAP_WORLD)
.include "${.CURDIR}/Makefile.${MACHINE}"
.else
#
# Make command line options:
# -DCLOBBER will remove /usr/include
# -DMAKE_KERBEROS4 to build KerberosIV
# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
# -DNOCLEAN do not clean at all
# -DNOTOOLS do not rebuild any tools first
# -DNOCRYPT will prevent building of crypt versions
# -DNOLKM do not build loadable kernel modules
# -DNOOBJDIR do not run ``${MAKE} obj''
# -DNOPROFILE do not build profiled libraries
# -DNOSECURE do not go into secure subdir
# -DNOGAMES do not go into games subdir
# -DNOSHARE do not go into share subdir
# -DNOINFO do not make or install info files
# -DNOLIBC_R do not build libc_r.
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
#
# The intended user-driven targets are:
# buildworld - rebuild *everything*, including glue to help do upgrades
# installworld- install everything built by "buildworld"
# world - buildworld + installworld
# update - convenient way to update your source tree (eg: sup/cvs)
# most - build user commands, no libraries or include files
# installmost - install user commands, no libraries or include files
#
# Standard targets (not defined here) are documented in the makefiles in
# /usr/share/mk. These include:
# obj depend all install clean cleandepend cleanobj
.if (!make(world)) && (!make(buildworld)) && (!make(installworld))
.MAKEFLAGS:= -m ${.CURDIR}/share/mk ${.MAKEFLAGS}
.endif
#
# Pick up any macros that are defined in the src-relative bsd.own.mk
# but not in the "system" bsd.own.mk. The "system" version has
# unfortunately already been included by the "system" sys.mk, so this
# only works for new macros. First undefine old macros that cause
# problems.
#
.undef LIBDIR
.include "${.CURDIR}/share/mk/bsd.own.mk"
# Put initial settings here.
SUBDIR=
# We must do share/info early so that installation of info `dir'
# entries works correctly. Do it first since it is less likely to
# grow dependencies on include and lib than vice versa.
.if exists(share/info)
SUBDIR+= share/info
.endif
# We must do include and lib early so that the perl *.ph generation
# works correctly as it uses the header files installed by this.
.if exists(include)
SUBDIR+= include
.endif
.if exists(lib)
SUBDIR+= lib
.endif
.if exists(bin)
SUBDIR+= bin
.endif
.if exists(games) && !defined(NOGAMES)
SUBDIR+= games
.endif
.if exists(gnu)
SUBDIR+= gnu
.endif
.if exists(kerberosIV) && exists(crypto) && !defined(NOCRYPT) && \
defined(MAKE_KERBEROS4)
SUBDIR+= kerberosIV
.endif
.if exists(libexec)
SUBDIR+= libexec
.endif
.if exists(sbin)
SUBDIR+= sbin
.endif
.if exists(share) && !defined(NOSHARE)
SUBDIR+= share
.endif
.if exists(sys)
SUBDIR+= sys
.endif
.if exists(usr.bin)
SUBDIR+= usr.bin
.endif
.if exists(usr.sbin)
SUBDIR+= usr.sbin
.endif
.if exists(secure) && !defined(NOCRYPT) && !defined(NOSECURE)
SUBDIR+= secure
.endif
.if exists(lkm) && !defined(NOLKM)
SUBDIR+= lkm
.endif
# etc must be last for "distribute" to work
.if exists(etc)
SUBDIR+= etc
.endif
# These are last, since it is nice to at least get the base system
# rebuilt before you do them.
.if defined(LOCAL_DIRS)
.for _DIR in ${LOCAL_DIRS}
.if exists(${_DIR}) & exists(${_DIR}/Makefile)
SUBDIR+= ${_DIR}
.endif
.endfor
.endif
# Handle -DNOOBJDIR, -DNOCLEAN and -DNOCLEANDIR
.if defined(NOOBJDIR)
OBJDIR=
.else
OBJDIR= obj
.endif
.if defined(NOCLEAN)
CLEANDIR=
.else
.if defined(NOCLEANDIR)
CLEANDIR= clean cleandepend
.else
CLEANDIR= cleandir
.endif
.endif
.if !defined(NOCLEAN)
_NODEPEND= true
.endif
.if defined(_NODEPEND)
_DEPEND= cleandepend
.else
_DEPEND= depend
.endif
SUP?= cvsup
SUPFLAGS?= -g -L 2 -P -
#
# While building tools for bootstrapping, we don't need to waste time on
# shared or profiled libraries, shared linkage, or documentation, except
# when the tools won't get cleaned we must use the defaults for shared
# libraries and shared linkage (and this doesn't waste time).
# XXX actually, we do need to waste time building shared libraries.
#
.if defined(NOCLEAN)
MK_FLAGS= -DNOINFO -DNOMAN -DNOPROFILE
.else
MK_FLAGS= -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED
.endif
#
# world
#
# Attempt to rebuild and reinstall *everything*, with reasonable chance of
# success, regardless of how old your existing system is.
#
# >> Beware, it overwrites the local build environment! <<
#
world:
@echo "--------------------------------------------------------------"
@echo "make world started on `LC_TIME=C date`"
@echo "--------------------------------------------------------------"
.if target(pre-world)
@echo
@echo "--------------------------------------------------------------"
@echo " Making 'pre-world' target"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} pre-world
.endif
cd ${.CURDIR}; ${MAKE} buildworld
cd ${.CURDIR}; ${MAKE} -B installworld
.if target(post-world)
@echo
@echo "--------------------------------------------------------------"
@echo " Making 'post-world' target"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} post-world
.endif
@echo
@echo "--------------------------------------------------------------"
@echo "make world completed on `LC_TIME=C date`"
@echo "--------------------------------------------------------------"
.if defined(MAKEOBJDIRPREFIX)
WORLDTMP= ${MAKEOBJDIRPREFIX}${.CURDIR}/tmp
.else
WORLDTMP= /usr/obj${.CURDIR}/tmp
.endif
STRICTTMPPATH= ${WORLDTMP}/sbin:${WORLDTMP}/usr/sbin:${WORLDTMP}/bin:${WORLDTMP}/usr/bin
TMPPATH= ${STRICTTMPPATH}:${PATH}
# XXX COMPILER_PATH is needed for finding cc1, ld and as
# XXX GCC_EXEC_PREFIX is for *crt.o. It is probably unnecessary now
# that LIBRARY_PATH is set. We still can't use -nostdlib, since gcc
# wouldn't link *crt.o or libgcc if it were used.
# XXX LD_LIBRARY_PATH is for ld.so. It is also used by ld, although we don't
# want that - all compile-time library paths should be resolved by gcc.
# It fails for set[ug]id executables (are any used?).
COMPILER_ENV= BISON_SIMPLE=${WORLDTMP}/usr/share/misc/bison.simple \
COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
GCC_EXEC_PREFIX=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib/ \
LD_LIBRARY_PATH=${WORLDTMP}${SHLIBDIR} \
LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib
BMAKEENV= PATH=${TMPPATH} ${COMPILER_ENV} NOEXTRADEPEND=t \
OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:/usr/libexec
XMAKEENV= PATH=${STRICTTMPPATH} ${COMPILER_ENV} \
OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
CFLAGS="-nostdinc ${CFLAGS}" # XXX -nostdlib
# used to compile and install 'make' in temporary build tree
MAKETMP= ${WORLDTMP}/make
IBMAKE= ${BMAKEENV} MAKEOBJDIR=${MAKETMP} ${MAKE} DESTDIR=${WORLDTMP}
# bootstrap make
BMAKE= ${BMAKEENV} ${WORLDTMP}/usr/bin/make DESTDIR=${WORLDTMP}
# cross make used for compilation
XMAKE= ${XMAKEENV} ${WORLDTMP}/usr/bin/make DESTDIR=${WORLDTMP}
# cross make used for final installation
IXMAKE= ${XMAKEENV} ${WORLDTMP}/usr/bin/make
#
# buildworld
#
# Attempt to rebuild the entire system, with reasonable chance of
# success, regardless of how old your existing system is.
#
buildworld:
.if !defined(NOCLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo " Cleaning up the temporary build tree"
@echo "--------------------------------------------------------------"
mkdir -p ${WORLDTMP}
chflags -R noschg ${WORLDTMP}/
rm -rf ${WORLDTMP}
.endif
.if !defined(NOTOOLS)
@echo
@echo "--------------------------------------------------------------"
@echo " Making make"
@echo "--------------------------------------------------------------"
mkdir -p ${WORLDTMP}/usr/bin ${MAKETMP}
( \
cd ${.CURDIR}/usr.bin/make; \
MAKEOBJDIRPREFIX=""; unset MAKEOBJDIRPREFIX; \
${IBMAKE} -I${.CURDIR}/share/mk ${MK_FLAGS} all; \
${IBMAKE} -I${.CURDIR}/share/mk ${MK_FLAGS} install; \
${IBMAKE} -I${.CURDIR}/share/mk ${MK_FLAGS} clean \
)
@echo
@echo "--------------------------------------------------------------"
@echo " Making mtree"
@echo "--------------------------------------------------------------"
mkdir -p ${WORLDTMP}/usr/sbin ${WORLDTMP}/mtree
( \
cd ${.CURDIR}/usr.sbin/mtree; \
MAKEOBJDIRPREFIX=""; unset MAKEOBJDIRPREFIX; \
export MAKEOBJDIR=${WORLDTMP}/mtree; \
${BMAKE} ${MK_FLAGS} all; \
${BMAKE} ${MK_FLAGS} -B install clean \
)
.endif
@echo
@echo "--------------------------------------------------------------"
@echo " Making hierarchy"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} hierarchy
.if !defined(NOCLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo " Cleaning up the obj tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} ${CLEANDIR:S/^/par-/}
.endif
.if !defined(NOOBJDIR)
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding the obj tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} par-${OBJDIR}
.endif
.if !defined(NOTOOLS)
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding bootstrap tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} bootstrap
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding tools necessary to build the include files"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} include-tools
.endif
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding ${DESTDIR}/usr/include"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; SHARED=copies ${BMAKE} includes
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding bootstrap libraries"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} bootstrap-libraries
.if !defined(NOTOOLS)
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding tools needed to build libraries"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} lib-tools
.endif
.if !defined(NOTOOLS)
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding all other tools needed to build the world"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} build-tools
.endif
.if !defined(_NODEPEND)
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding dependencies"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${XMAKE} par-depend
.endif
@echo
@echo "--------------------------------------------------------------"
@echo " Building libraries"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${XMAKE} -DNOINFO -DNOMAN libraries
@echo
@echo "--------------------------------------------------------------"
@echo " Building everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${XMAKE} all
#
# installworld
#
# Installs everything compiled by a 'buildworld'.
#
installworld:
cd ${.CURDIR}; ${IXMAKE} reinstall
#
# reinstall
#
# If you have a build server, you can NFS mount the source and obj directories
# and do a 'make reinstall' on the *client* to install new binaries from the
# most recent server build.
#
reinstall:
@echo "--------------------------------------------------------------"
@echo " Making hierarchy"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} hierarchy
@echo
@echo "--------------------------------------------------------------"
@echo " Installing everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} install
.if ${MACHINE_ARCH} == "i386"
@echo
@echo "--------------------------------------------------------------"
@echo " Re-scanning the shared libraries.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; /sbin/ldconfig -R
.endif
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding man page indexes"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/share/man; ${MAKE} makedb
#
# update
#
# Update the source tree, by running sup and/or running cvs to update to the
# latest copy.
#
update:
.if defined(SUP_UPDATE)
@echo "--------------------------------------------------------------"
@echo "Running ${SUP}"
@echo "--------------------------------------------------------------"
@${SUP} ${SUPFLAGS} ${SUPFILE}
.if defined(SUPFILE1)
@${SUP} ${SUPFLAGS} ${SUPFILE1}
.endif
.if defined(SUPFILE2)
@${SUP} ${SUPFLAGS} ${SUPFILE2}
.endif
.endif
.if defined(CVS_UPDATE)
@echo "--------------------------------------------------------------"
@echo "Updating /usr/src from cvs repository" ${CVSROOT}
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; cvs -q update -P -d
.endif
#
# most
#
# Build most of the user binaries on the existing system libs and includes.
#
most:
@echo "--------------------------------------------------------------"
@echo " Building programs only"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/bin; ${MAKE} all
cd ${.CURDIR}/sbin; ${MAKE} all
cd ${.CURDIR}/libexec; ${MAKE} all
cd ${.CURDIR}/usr.bin; ${MAKE} all
cd ${.CURDIR}/usr.sbin; ${MAKE} all
cd ${.CURDIR}/gnu/libexec; ${MAKE} all
cd ${.CURDIR}/gnu/usr.bin; ${MAKE} all
cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} all
#.if defined(MAKE_KERBEROS4) && !defined(NOCRYPT)
# cd ${.CURDIR}/kerberosIV; ${MAKE} most
#.endif
#.if !defined(NOSECURE) && !defined(NOCRYPT)
# cd ${.CURDIR}/secure; ${MAKE} most
#.endif
#
# installmost
#
# Install the binaries built by the 'most' target. This does not include
# libraries or include files.
#
installmost:
@echo "--------------------------------------------------------------"
@echo " Installing programs only"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/bin; ${MAKE} install
cd ${.CURDIR}/sbin; ${MAKE} install
cd ${.CURDIR}/libexec; ${MAKE} install
cd ${.CURDIR}/usr.bin; ${MAKE} install
cd ${.CURDIR}/usr.sbin; ${MAKE} install
cd ${.CURDIR}/gnu/libexec; ${MAKE} install
cd ${.CURDIR}/gnu/usr.bin; ${MAKE} install
cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} install
#.if defined(MAKE_KERBEROS4) && !defined(NOCRYPT)
# cd ${.CURDIR}/kerberosIV; ${MAKE} installmost
#.endif
#.if !defined(NOSECURE) && !defined(NOCRYPT)
# cd ${.CURDIR}/secure; ${MAKE} installmost
#.endif
#
# ------------------------------------------------------------------------
#
# From here onwards are utility targets used by the 'make world' and
# related targets. If your 'world' breaks, you may like to try to fix
# the problem and manually run the following targets to attempt to
# complete the build. Beware, this is *not* guaranteed to work, you
# need to have a pretty good grip on the current state of the system
# to attempt to manually finish it. If in doubt, 'make world' again.
#
#
# heirarchy - ensure that all the needed directories are present
#
hierarchy:
cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
#
# bootstrap - [re]build tools needed to run the actual build, this includes
# tools needed by 'make depend', as some tools are needed to generate source
# for the dependency information to be gathered from.
#
bootstrap:
.if defined(DESTDIR)
rm -f ${DESTDIR}/usr/src/sys
ln -s ${.CURDIR}/sys ${DESTDIR}/usr/src
cd ${.CURDIR}/include; find -dx . | cpio -dump ${DESTDIR}/usr/include
.for d in net netinet posix4 sys vm machine
if [ -h ${DESTDIR}/usr/include/$d ]; then \
rm -f ${DESTDIR}/usr/include/$d ; \
fi
.endfor
cd ${.CURDIR}/sys; \
find -dx net netinet posix4 sys vm -name '*.h' -o -type d | \
cpio -dump ${DESTDIR}/usr/include
mkdir -p ${DESTDIR}/usr/include/machine
cd ${.CURDIR}/sys/${MACHINE_ARCH}/include; find -dx . -name '*.h' -o -type d | \
cpio -dump ${DESTDIR}/usr/include/machine
.endif
cd ${.CURDIR}/usr.bin/make; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
${MAKE} ${MK_FLAGS} all; \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
cd ${.CURDIR}/usr.bin/xinstall; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
${MAKE} ${MK_FLAGS} all; \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
cd ${.CURDIR}/usr.bin/yacc; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
${MAKE} ${MK_FLAGS} all; \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
cd ${.CURDIR}/usr.bin/lex; ${MAKE} bootstrap; \
${MAKE} ${MK_FLAGS} ${_DEPEND}; \
${MAKE} ${MK_FLAGS} -DNOLIB all; \
${MAKE} ${MK_FLAGS} -DNOLIB -B install ${CLEANDIR}
.if !defined(NOOBJDIR)
cd ${.CURDIR}/usr.bin/lex; ${MAKE} ${OBJDIR}
.endif
cd ${.CURDIR}/usr.sbin/mtree; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
${MAKE} ${MK_FLAGS} all; \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.if defined(DESTDIR)
cd ${.CURDIR}/include && ${MAKE} copies
.endif
#
# include-tools - generally the same as 'bootstrap', except that it's for
# things that are specifically needed to generate include files.
#
# XXX should be merged with bootstrap, it's not worth keeeping them separate.
# Well, maybe it is now. We force 'cleandepend' here to avoid dependencies
# on cleaned away headers in ${WORLDTMP}.
#
include-tools:
.for d in usr.bin/compile_et usr.bin/rpcgen
cd ${.CURDIR}/$d; ${MAKE} cleandepend; \
${MAKE} ${MK_FLAGS} ${_DEPEND}; \
${MAKE} ${MK_FLAGS} all; \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endfor
#
# includes - possibly generate and install the include files.
#
includes:
.if defined(CLOBBER)
rm -rf ${DESTDIR}/usr/include/*
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
-p ${DESTDIR}/usr/include
.endif
cd ${.CURDIR}/include; ${MAKE} -B all install
cd ${.CURDIR}/gnu/include; ${MAKE} install
cd ${.CURDIR}/gnu/lib/libmp; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libobjc; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libreadline; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libregex; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libstdc++; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libg++; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libdialog; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libgmp; ${MAKE} beforeinstall
.if exists(secure) && !defined(NOCRYPT)
cd ${.CURDIR}/secure/lib/libdes; ${MAKE} beforeinstall
.endif
.if exists(kerberosIV) && !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
cd ${.CURDIR}/kerberosIV/lib/libacl; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkadm; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkafs; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkdb; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkrb; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
.else
cd ${.CURDIR}/lib/libtelnet; ${MAKE} beforeinstall
.endif
.if exists(${.CURDIR}/lib/csu/${MACHINE})
cd ${.CURDIR}/lib/csu/${MACHINE}; ${MAKE} beforeinstall
.endif
cd ${.CURDIR}/lib/libalias; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libc; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcalendar; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcurses; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libdisk; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libedit; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libftpio; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libmd; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libmytinfo; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libncurses; ${MAKE} beforeinstall
.if !defined(WANT_CSRG_LIBM)
cd ${.CURDIR}/lib/msun; ${MAKE} beforeinstall
.endif
cd ${.CURDIR}/lib/libopie; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libpcap; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/librpcsvc; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libskey; ${MAKE} beforeinstall
.if !defined(NOTCL) && exists (${.CURDIR}/contrib/tcl) && \
exists(${.CURDIR}/usr.bin/tclsh) && exists (${.CURDIR}/lib/libtcl)
cd ${.CURDIR}/lib/libtcl; ${MAKE} installhdrs
.endif
cd ${.CURDIR}/lib/libtermcap; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcom_err; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libss; ${MAKE} -B hdrs beforeinstall
cd ${.CURDIR}/lib/libscsi; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libutil; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libvgl; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libz; ${MAKE} beforeinstall
cd ${.CURDIR}/usr.bin/f2c; ${MAKE} beforeinstall
cd ${.CURDIR}/usr.bin/lex; ${MAKE} beforeinstall
#
# Declare tools if they are not required on all architectures.
#
.if ${MACHINE_ARCH} == "i386"
# aout tools:
_aout_ar = usr.bin/ar
_aout_as = gnu/usr.bin/as
_aout_ld = gnu/usr.bin/ld
_aout_nm = usr.bin/nm
_aout_ranlib = usr.bin/ranlib
_aout_size = usr.bin/size
_aout_strip = usr.bin/strip
_objformat = usr.bin/objformat
.endif
#
# lib-tools - build tools to compile and install the libraries.
#
# XXX gperf is required for cc
# XXX a new ld and tsort is required for cc
lib-tools:
.for d in \
gnu/usr.bin/gperf \
${_aout_ld} \
usr.bin/tsort \
${_aout_as} \
gnu/usr.bin/bison \
gnu/usr.bin/cc \
${_aout_ar} \
usr.bin/env \
usr.bin/lex/lib \
usr.bin/mk_cmds \
${_aout_nm} \
${_aout_ranlib} \
${_aout_strip} \
gnu/usr.bin/binutils \
usr.bin/uudecode \
${_objformat}
cd ${.CURDIR}/$d; ${MAKE} ${MK_FLAGS} ${_DEPEND}; \
${MAKE} ${MK_FLAGS} all; \
${MAKE} ${MK_FLAGS} -B install; \
${MAKE} ${MK_FLAGS:S/-DNOPIC//} -B ${CLEANDIR} ${OBJDIR}
.endfor
#
# We have to know too much about ordering and subdirs in the lib trees:
#
# To satisfy shared library linkage when only the libraries being built
# are visible:
#
# libcom_err must be built before libss.
# libcrypt and libmd must be built before libskey.
# libm must be built before libtcl.
# libmytinfo must be built before libdialog and libncurses.
# libncurses must be built before libdialog.
# libtermcap must be built before libcurses, libedit and libreadline.
#
# Some libraries are built conditionally and/or are in inconsistently
# named directories:
#
.if exists(lib/csu/${MACHINE}.pcc)
_csu=lib/csu/${MACHINE}.pcc
.else
_csu=lib/csu/${MACHINE}
.endif
.if !defined(NOSECURE) && !defined(NOCRYPT)
_libcrypt= secure/lib/libcrypt lib/libcrypt
.else
_libcrypt= lib/libcrypt
.endif
.if defined(WANT_CSRG_LIBM)
_libm= lib/libm
.else
_libm= lib/msun
.endif
#
# bootstrap-libraries - build just enough libraries for the bootstrap
# tools, and install them under ${WORLDTMP}.
#
# Build csu and libgcc early so that some tools get linked to the new
# versions (too late for the main tools, however). Then build the
# necessary prerequisite libraries (libtermcap just needs to be before
# libcurses, and this only matters for the NOCLEAN case when NOPIC is
# not set).
#
# This is mostly wrong. The build tools must run on the host system,
# so they should use host libraries. We depend on the target being
# similar enough to the host for new target libraries to work on the
# host.
#
bootstrap-libraries:
.for _lib in ${_csu} gnu/usr.bin/cc/libgcc lib/libtermcap \
gnu/lib/libregex gnu/lib/libreadline lib/libc \
${_libcrypt} lib/libcurses lib/libedit ${_libm} \
lib/libmd lib/libutil lib/libz usr.bin/lex/lib
.if exists(${.CURDIR}/${_lib})
cd ${.CURDIR}/${_lib}; \
${MAKE} ${MK_FLAGS} ${_DEPEND}; \
${MAKE} ${MK_FLAGS} all; \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.endfor
#
# libraries - build all libraries, and install them under ${DESTDIR}.
#
# The ordering is not as special as for bootstrap-libraries. Build
# the prerequisites first, then build almost everything else in
# alphabetical order.
#
libraries:
.for _lib in lib/libcom_err ${_libcrypt} ${_libm} lib/libmytinfo \
lib/libncurses lib/libtermcap \
gnu/lib gnu/usr.bin/cc/libgcc lib usr.bin/lex/lib usr.sbin/pcvt/keycap
.if exists(${.CURDIR}/${_lib})
cd ${.CURDIR}/${_lib}; ${MAKE} all; ${MAKE} -B install
.endif
.endfor
.if exists(${.CURDIR}/secure/lib) && !defined(NOCRYPT) && !defined(NOSECURE)
cd ${.CURDIR}/secure/lib; ${MAKE} all; ${MAKE} -B install
.endif
.if exists(${.CURDIR}/kerberosIV/lib) && !defined(NOCRYPT) && \
defined(MAKE_KERBEROS4)
cd ${.CURDIR}/kerberosIV/lib; ${MAKE} all; ${MAKE} -B install
.endif
#
# Exclude unused tools from build-tools.
#
.if !defined(NOGAMES) && exists(${.CURDIR}/games)
_adventure= games/adventure
_caesar= games/caesar
_hack= games/hack
_phantasia= games/phantasia
_strfile= games/fortune/strfile
.endif
.if !defined(NOPERL)
_perl= gnu/usr.bin/perl/perl
.endif
.if !defined(NOSHARE) && exists(${.CURDIR}/share)
_scrnmaps= share/syscons/scrnmaps
.endif
.if !defined(NOLKM) && exists(${.CURDIR}/lkm)
_linux= lkm/linux
.endif
BTMAKEFLAGS= ${MK_FLAGS} -D_BUILD_TOOLS
#
# build-tools - build and install any other tools needed to complete the
# compile and install.
# ifdef stale
# bc and cpp are required to build groff. Otherwise, the order here is
# mostly historical, i.e., bogus.
# chmod is used to build gcc's tmpmultilib[2] at obscure times.
# endif stale
# XXX uname is a bug - the target should not depend on the host.
#
build-tools:
.for d in \
bin/cat \
bin/chmod \
bin/cp \
bin/date \
bin/dd \
bin/echo \
bin/expr \
bin/hostname \
bin/ln \
bin/ls \
bin/mkdir \
bin/mv \
bin/rm \
bin/test \
${_caesar} \
${_strfile} \
gnu/usr.bin/awk \
gnu/usr.bin/bc \
gnu/usr.bin/grep \
gnu/usr.bin/groff \
gnu/usr.bin/gzip \
gnu/usr.bin/man/makewhatis \
gnu/usr.bin/patch \
${_perl} \
gnu/usr.bin/sort \
gnu/usr.bin/texinfo \
usr.bin/basename \
usr.bin/cap_mkdb \
usr.bin/chflags \
usr.bin/cmp \
usr.bin/col \
usr.bin/colldef \
usr.bin/cpp \
usr.bin/expand \
usr.bin/file2c \
usr.bin/find \
usr.bin/gencat \
usr.bin/id \
usr.bin/join \
usr.bin/lorder \
usr.bin/m4 \
usr.bin/mkdep \
usr.bin/mklocale \
usr.bin/paste \
usr.bin/sed \
${_aout_size} \
usr.bin/soelim \
usr.bin/symorder \
usr.bin/touch \
usr.bin/tr \
usr.bin/true \
usr.bin/uname \
usr.bin/uuencode \
usr.bin/vgrind \
usr.bin/vi \
usr.bin/wc \
usr.bin/xargs \
usr.bin/yacc \
usr.sbin/chown \
usr.sbin/mtree \
usr.sbin/zic \
bin/sh
cd ${.CURDIR}/$d; ${MAKE} ${BTMAKEFLAGS} ${_DEPEND}; \
${MAKE} ${BTMAKEFLAGS} all; \
${MAKE} ${BTMAKEFLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endfor
.if !defined(NOGAMES) && exists(${.CURDIR}/games)
cd ${DESTDIR}/usr/games; cp -p caesar strfile ${DESTDIR}/usr/bin
.endif
.for d in \
bin/sh \
${_adventure} \
${_hack} \
${_phantasia} \
gnu/usr.bin/cc/cc_tools \
lib/libmytinfo \
${_linux} \
${_scrnmaps} \
sys/i386/boot/netboot
cd ${.CURDIR}/$d; ${MAKE} ${BTMAKEFLAGS} build-tools
.endfor
cd ${.CURDIR}/usr.bin/tn3270/tools; ${MAKE} ${BTMAKEFLAGS} all
.for __target in clean cleandepend cleandir depend obj
.for entry in ${SUBDIR}
${entry}.${__target}__D: .PHONY
@if test -d ${.CURDIR}/${entry}.${MACHINE}; then \
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE}"; \
edir=${entry}.${MACHINE}; \
cd ${.CURDIR}/$${edir}; \
else \
${ECHODIR} "===> ${DIRPRFX}${entry}"; \
edir=${entry}; \
cd ${.CURDIR}/$${edir}; \
fi; \
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
.endfor
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
.endfor
.endif
.include <bsd.subdir.mk>