d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fc173c8589
freebsd-dev/Makefile.in
Etienne Dechamps b5a28807cd Move partition scanning from userspace to module. 
Currently, zpool online -e (dynamic vdev expansion) doesn't work on
whole disks because we're invoking ioctl(BLKRRPART) from userspace
while ZFS still has a partition open on the disk, which results in
EBUSY.

This patch moves the BLKRRPART invocation from the zpool utility to the
module. Specifically, this is done just before opening the device in
vdev_disk_open() which is called inside vdev_reopen(). This requires
jumping through some hoops to get to the disk device from the partition
device, and to make sure we can still open the partition after the
BLKRRPART call.

Note that this new code path is triggered on dynamic vdev expansion
only; other actions, like creating a new pool, are unchanged and still
call BLKRRPART from userspace.

This change also depends on API changes which are available in 2.6.37
and latter kernels.  The build system has been updated to detect this,
but there is no compatibility mode for older kernels.  This means that
online expansion will NOT be available in older kernels.  However, it
will still be possible to expand the vdev offline.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #808
2012-07-17 09:17:31 -07:00

1118 lines
37 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
###############################################################################
# Written by Prakash Surya <surya1@llnl.gov>
###############################################################################
# Build targets for RPM packages.
###############################################################################
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(am__configure_deps) $(noinst_HEADERS) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/PKGBUILD-zfs-modules.in $(srcdir)/PKGBUILD-zfs.in \
$(srcdir)/zfs-modules.spec.in \
$(srcdir)/zfs-script-config.sh.in $(srcdir)/zfs.release.in \
$(srcdir)/zfs.spec.in $(srcdir)/zfs_config.h.in \
$(top_srcdir)/config/arch.am $(top_srcdir)/config/deb.am \
$(top_srcdir)/config/rpm.am $(top_srcdir)/config/tgz.am \
$(top_srcdir)/configure $(top_srcdir)/module/Makefile.in \
$(top_srcdir)/module/avl/Makefile.in \
$(top_srcdir)/module/nvpair/Makefile.in \
$(top_srcdir)/module/unicode/Makefile.in \
$(top_srcdir)/module/zcommon/Makefile.in \
$(top_srcdir)/module/zfs/Makefile.in \
$(top_srcdir)/module/zpios/Makefile.in AUTHORS COPYING \
ChangeLog config/config.guess config/config.sub config/depcomp \
config/install-sh config/ltmain.sh config/missing
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
$(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
$(top_srcdir)/config/kernel-automount.m4 \
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
$(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
$(top_srcdir)/config/kernel-bdi.m4 \
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
$(top_srcdir)/config/kernel-blk-end-request.m4 \
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
$(top_srcdir)/config/kernel-blk-queue-discard.m4 \
$(top_srcdir)/config/kernel-blk-queue-flush.m4 \
$(top_srcdir)/config/kernel-blk-queue-io-opt.m4 \
$(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
$(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
$(top_srcdir)/config/kernel-blk-queue-nonrot.m4 \
$(top_srcdir)/config/kernel-blk-queue-physical-block-size.m4 \
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
$(top_srcdir)/config/kernel-blkdev-get.m4 \
$(top_srcdir)/config/kernel-check-disk-size-change.m4 \
$(top_srcdir)/config/kernel-create-umode-t.m4 \
$(top_srcdir)/config/kernel-d-make-root.m4 \
$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
$(top_srcdir)/config/kernel-evict-inode.m4 \
$(top_srcdir)/config/kernel-fallocate.m4 \
$(top_srcdir)/config/kernel-fmode-t.m4 \
$(top_srcdir)/config/kernel-fsync.m4 \
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
$(top_srcdir)/config/kernel-get-gendisk.m4 \
$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
$(top_srcdir)/config/kernel-mount-nodev.m4 \
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
$(top_srcdir)/config/kernel-security-inode-init.m4 \
$(top_srcdir)/config/kernel-set-nlink.m4 \
$(top_srcdir)/config/kernel-show-options.m4 \
$(top_srcdir)/config/kernel-shrink.m4 \
$(top_srcdir)/config/kernel-truncate-setsize.m4 \
$(top_srcdir)/config/kernel-xattr-handler.m4 \
$(top_srcdir)/config/kernel.m4 \
$(top_srcdir)/config/user-arch.m4 \
$(top_srcdir)/config/user-frame-larger-than.m4 \
$(top_srcdir)/config/user-ioctl.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
$(top_srcdir)/config/user-selinux.m4 \
$(top_srcdir)/config/user-udev.m4 \
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = zfs_config.h
CONFIG_CLEAN_FILES = module/Makefile module/avl/Makefile \
module/nvpair/Makefile module/unicode/Makefile \
module/zcommon/Makefile module/zfs/Makefile \
module/zpios/Makefile zfs.spec zfs-modules.spec PKGBUILD-zfs \
PKGBUILD-zfs-modules zfs-script-config.sh zfs.release
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
HEADERS = $(noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = dracut udev etc man scripts lib cmd module include
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d "$(distdir)" \
|| { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr "$(distdir)"; }; }
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_DMU_TX = @DEBUG_DMU_TX@
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
DEBUG_ZFS = @DEBUG_ZFS@
DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
GREP = @GREP@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
HAVE_MAKEPKG = @HAVE_MAKEPKG@
HAVE_PACMAN = @HAVE_PACMAN@
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KERNELCPPFLAGS = @KERNELCPPFLAGS@
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBLKID = @LIBBLKID@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSELINUX = @LIBSELINUX@
LIBTOOL = @LIBTOOL@
LIBUUID = @LIBUUID@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LINUX_VERSION = @LINUX_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MAKEPKG = @MAKEPKG@
MAKEPKG_VERSION = @MAKEPKG_VERSION@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACMAN = @PACMAN@
PACMAN_VERSION = @PACMAN_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL = @SPL@
SPL_OBJ = @SPL_OBJ@
SPL_SYMBOLS = @SPL_SYMBOLS@
SPL_VERSION = @SPL_VERSION@
STRIP = @STRIP@
TARGET_ASM_DIR = @TARGET_ASM_DIR@
VENDOR = @VENDOR@
VERSION = @VERSION@
ZFS_CONFIG = @ZFS_CONFIG@
ZFS_META_ALIAS = @ZFS_META_ALIAS@
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
ZFS_META_DATA = @ZFS_META_DATA@
ZFS_META_LICENSE = @ZFS_META_LICENSE@
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
ZFS_META_NAME = @ZFS_META_NAME@
ZFS_META_RELEASE = @ZFS_META_RELEASE@
ZFS_META_VERSION = @ZFS_META_VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
udevdir = @udevdir@
udevruledir = @udevruledir@
@CONFIG_USER_TRUE@USER_DIR = dracut udev etc man scripts lib cmd
@CONFIG_KERNEL_TRUE@KERNEL_DIR = module
SUBDIRS = $(USER_DIR) $(KERNEL_DIR) include
AUTOMAKE_OPTIONS = foreign
EXTRA_DIST = autogen.sh zfs.spec.in zfs-modules.spec.in \
config/config.awk config/rpm.am config/deb.am config/tgz.am \
META DISCLAIMER COPYRIGHT README.markdown OPENSOLARIS.LICENSE \
ZFS.RELEASE
noinst_HEADERS = zfs_config.h zfs.release
all: zfs_config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/rpm.am $(top_srcdir)/config/deb.am $(top_srcdir)/config/tgz.am $(top_srcdir)/config/arch.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
zfs_config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/zfs_config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status zfs_config.h
$(srcdir)/zfs_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f zfs_config.h stamp-h1
module/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/avl/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/avl/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/nvpair/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/nvpair/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/unicode/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/unicode/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/zcommon/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zcommon/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/zfs/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zfs/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/zpios/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zpios/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
zfs.spec: $(top_builddir)/config.status $(srcdir)/zfs.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
zfs-modules.spec: $(top_builddir)/config.status $(srcdir)/zfs-modules.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
PKGBUILD-zfs: $(top_builddir)/config.status $(srcdir)/PKGBUILD-zfs.in
cd $(top_builddir) && $(SHELL) ./config.status $@
PKGBUILD-zfs-modules: $(top_builddir)/config.status $(srcdir)/PKGBUILD-zfs-modules.in
cd $(top_builddir) && $(SHELL) ./config.status $@
zfs-script-config.sh: $(top_builddir)/config.status $(srcdir)/zfs-script-config.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $@
zfs.release: $(top_builddir)/config.status $(srcdir)/zfs.release.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
TAGS: tags-recursive $(HEADERS) $(SOURCES) zfs_config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) zfs_config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) zfs_config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) zfs_config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@$(am__cd) '$(distuninstallcheck_dir)' \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(HEADERS) zfs_config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
@CONFIG_KERNEL_FALSE@install-data-local:
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-local distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-data-local
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
ctags-recursive install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-generic distclean-hdr \
distclean-libtool distclean-local distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-data-local install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am
srpm-modules:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" srpm-common
srpm-utils:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" srpm-common
srpm: srpm-modules srpm-utils
rpm-modules: srpm-modules
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" rpm-common
rpm-utils: srpm-utils
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" rpm-common
rpm-modules: srpm-modules
rpm: rpm-modules rpm-utils
rpm-local:
@(if test "${HAVE_RPMBUILD}" = "no"; then \
echo -e "\n" \
"*** Required util ${RPMBUILD} missing. Please install the\n" \
"*** package for your distribution which provides ${RPMBUILD},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi; \
mkdir -p $(rpmbuild)/TMP && \
mkdir -p $(rpmbuild)/BUILD && \
mkdir -p $(rpmbuild)/RPMS && \
mkdir -p $(rpmbuild)/SRPMS && \
mkdir -p $(rpmbuild)/SPECS && \
cp $(rpmspec) $(rpmbuild)/SPECS && \
mkdir -p $(rpmbuild)/SOURCES && \
cp $(distdir).tar.gz $(rpmbuild)/SOURCES)
srpm-common: dist
rpmpkg=$(pkg)-$(ZFS_META_VERSION)-$(ZFS_META_RELEASE).src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
$(RPMBUILD) \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
--define "build_src_rpm 1" \
--define "dist %{nil}" \
--nodeps -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
cp $$rpmbuild/SRPMS/$$rpmpkg . || exit 1; \
$(RM) -R $$rpmbuild
rpm-common:
rpmpkg=$(pkg)-$(ZFS_META_VERSION)-$(ZFS_META_RELEASE).src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
$(RPMBUILD) \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
--define "dist %{nil}" \
--define "require_kdir $(LINUX)" \
--define "require_kobj $(LINUX_OBJ)" \
--define "require_kver $(LINUX_VERSION)" \
--define "require_spldir $(SPL)" \
--define "require_splobj $(SPL_OBJ)" \
--define "require_splver $(SPL_VERSION)" \
--define "$(DEBUG_ZFS) 1" \
--define "$(DEBUG_DMU_TX) 1" \
--nodeps --rebuild $$rpmpkg || exit 1; \
cp $$rpmbuild/RPMS/*/* . || exit 1; \
$(RM) -R $$rpmbuild
deb-local:
@(if test "${HAVE_DPKGBUILD}" = "no"; then \
echo -e "\n" \
"*** Required util ${DPKGBUILD} missing. Please install the\n" \
"*** package for your distribution which provides ${DPKGBUILD},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi; \
if test "${HAVE_ALIEN}" = "no"; then \
echo -e "\n" \
"*** Required util ${ALIEN} missing. Please install the\n" \
"*** package for your distribution which provides ${ALIEN},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi)
deb-modules: deb-local rpm-modules
name=${PACKAGE}-modules; \
version=${ZFS_META_VERSION}-${ZFS_META_RELEASE}; \
release=`echo ${LINUX_VERSION} | $(SED) -e "s/-/_/g"`; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
pkg1=$${name}-$${version}_$${release}.$${arch}.rpm; \
pkg2=$${name}-devel-$${version}_$${release}.$${arch}.rpm; \
fakeroot $(ALIEN) --scripts --to-deb $$pkg1 $$pkg2; \
$(RM) $$pkg1 $$pkg2
deb-utils: deb-local rpm-utils
name=${PACKAGE}; \
version=${ZFS_META_VERSION}-${ZFS_META_RELEASE}; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
pkg1=$${name}-$${version}.$${arch}.rpm; \
pkg2=$${name}-devel-$${version}.$${arch}.rpm; \
pkg3=$${name}-test-$${version}.$${arch}.rpm; \
pkg4=$${name}-dracut-$${version}.$${arch}.rpm; \
fakeroot $(ALIEN) --scripts --to-deb $$pkg1 $$pkg2 $$pkg3 $$pkg4; \
$(RM) $$pkg1 $$pkg2 $$pkg3 $$pkg4
deb: deb-modules deb-utils
tgz-local:
@(if test "${HAVE_ALIEN}" = "no"; then \
echo -e "\n" \
"*** Required util ${ALIEN} missing. Please install the\n" \
"*** package for your distribution which provides ${ALIEN},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi)
tgz-modules: tgz-local rpm-modules
name=${PACKAGE}-modules; \
version=${ZFS_META_VERSION}-${ZFS_META_RELEASE}; \
release=`echo ${LINUX_VERSION} | $(SED) -e "s/-/_/g"`; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
pkg1=$${name}-$${version}_$${release}.$${arch}.rpm; \
pkg2=$${name}-devel-$${version}_$${release}.$${arch}.rpm; \
fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2; \
$(RM) $$pkg1 $$pkg2
tgz-utils: tgz-local rpm-utils
name=${PACKAGE}; \
version=${ZFS_META_VERSION}-${ZFS_META_RELEASE}; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
pkg1=$${name}-$${version}.$${arch}.rpm; \
pkg2=$${name}-devel-$${version}.$${arch}.rpm; \
pkg3=$${name}-test-$${version}.$${arch}.rpm; \
fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2 $$pkg3; \
$(RM) $$pkg1 $$pkg2 $$pkg3
tgz: tgz-modules tgz-utils
sarch-modules:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" sarch-common
sarch-utils:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" sarch-common
sarch: sarch-modules sarch-utils
arch-modules:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" arch-common
arch-utils:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" arch-common
arch: arch-modules arch-utils
arch-local:
@(if test "${HAVE_MAKEPKG}" = "no"; then \
echo -e "\n" \
"*** Required util ${MAKEPKG} missing. Please install the\n" \
"*** package for your distribution which provides ${MAKEPKG},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi;)
sarch-common: dist
pkgbuild=PKGBUILD-$(pkg); \
$(MAKE) $(AM_MAKEFLAGS) arch-local || exit 1; \
$(MAKEPKG) --allsource --skipinteg --nodeps -p $$pkgbuild || exit 1;
arch-common: dist
pkgbuild=PKGBUILD-$(pkg); \
$(MAKE) $(AM_MAKEFLAGS) arch-local || exit 1; \
$(MAKEPKG) --skipinteg -p $$pkgbuild || exit 1;
distclean-local::
-$(RM) -R autom4te*.cache
-find . \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
-o -name .pc -o -name .hg -o -name .git \) -prune -o \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-o -name '.*.rej' -o -name '.script-config' -o -size 0 \
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \
-o -name 'Makefile' -o -name 'Module.symvers' \
-o -name '*.order' -o -name '*.markers' \) \
-type f -print | xargs $(RM)
@CONFIG_KERNEL_TRUE@install-data-local:
@CONFIG_KERNEL_TRUE@ release=$(ZFS_META_VERSION)-$(ZFS_META_RELEASE); \
@CONFIG_KERNEL_TRUE@ instdest=$(DESTDIR)/usr/src/zfs-$$release/$(LINUX_VERSION); \
@CONFIG_KERNEL_TRUE@ for instfile in $(noinst_HEADERS) module/$(LINUX_SYMBOLS); do \
@CONFIG_KERNEL_TRUE@ $(INSTALL) -D $$instfile $$instdest/$$instfile; \
@CONFIG_KERNEL_TRUE@ done
ctags:
$(RM) $(top_srcdir)/tags
find $(top_srcdir) -name .git -prune -o -name '*.[hc]' | xargs ctags
etags:
$(RM) $(top_srcdir)/TAGS
find $(top_srcdir) -name .pc -prune -o -name '*.[hc]' | xargs etags -a
tags: ctags etags
pkg: @DEFAULT_PACKAGE@
pkg-modules: @DEFAULT_PACKAGE@-modules
pkg-utils: @DEFAULT_PACKAGE@-utils
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink