Pyun YongHyeon fca56fb2c3 For Yukon II controllers that implement optional temperature sensor ... and voltage sensor, TWSI is used to get sensor data. msk(4) does not monitor these sensors and interrupt for TWSI completion is disabled by default. However, due to unknown reason, the TWSI completion interrupt fires and it resulted in interrupt storm. To fix it, acknowledges the TWSI completion interrupt if driver see the event. Given that not all Yukon II controllers show the issue it could be a silicon bug which does not honor interrupt masking. Probably the right way to address the issue is disabling automatic TWSI cycle initiation against these sensors. It would be even better to implement reading voltage/temperature from the NIC but it requires access to National LM80 through TWSI and documentation to do that is not available yet(probably will never happen). Reported by: jhb Tested by: jhb MFC after: 2 weeks		2012-04-25 02:46:13 +00:00
..
amd64	Enable DTrace hooks in GENERIC.	2012-04-20 21:37:42 +00:00
arm	Interrupts must be disabled while handling a partial cache line flush,	2012-04-22 00:58:04 +00:00
boot	Build a 32-bit EFI loader on amd64. This to match the rest of the	2012-04-20 15:01:23 +00:00
bsm
cam	Alike to SCSI make adaclose() to not return error if device gone.	2012-04-18 08:55:26 +00:00
cddl	Remove unused thread argument to vrecycle().	2012-04-23 14:10:34 +00:00
compat	- Implement pipe2 syscall for Linuxulator. This syscall appeared in 2.6.27	2012-04-16 21:22:02 +00:00
conf	Remove dead code. The routines in atomic.S did not work properly anyway, and	2012-04-22 18:56:56 +00:00
contrib	Merge ACPICA 20120420.	2012-04-23 23:05:14 +00:00
crypto	Add support for the extended FPU states on amd64, both for native	2012-01-21 17:45:27 +00:00
ddb	Update the ddb and gdb backends for the new 'trace_thread' hook.	2012-04-12 21:34:58 +00:00
dev	For Yukon II controllers that implement optional temperature sensor	2012-04-25 02:46:13 +00:00
fs	Remove unused thread argument to vrecycle().	2012-04-23 14:10:34 +00:00
gdb	Update the ddb and gdb backends for the new 'trace_thread' hook.	2012-04-12 21:34:58 +00:00
geom	Fix copy-paste typo in r234603.	2012-04-23 16:35:19 +00:00
gnu/fs	Remove unused thread argument to vrecycle().	2012-04-23 14:10:34 +00:00
i386	Enable DTrace hooks in GENERIC.	2012-04-20 21:37:42 +00:00
ia64	Remove pty(4) from our kernel configurations.	2012-03-21 08:38:42 +00:00
isa
kern	Allow for the process information sysctls to accept a thread id in addition	2012-04-23 20:56:05 +00:00
kgssapi
libkern	Remove second consts in r233288 in order to appease C++ compilers.	2012-03-26 18:22:04 +00:00
mips	Allow for MIPS devices to have a specific probe/attach order.	2012-04-21 04:17:30 +00:00
modules	o Fixes:	2012-04-21 01:51:16 +00:00
net	Do not require radix write lock to be held while dumping route table	2012-04-22 16:13:23 +00:00
net80211	Migrate the net80211 TX aggregation state to be from per-AC to per-TID.	2012-04-15 20:29:39 +00:00
netatalk	Fix typos	2012-02-28 15:07:05 +00:00
netgraph	Fix panic in ng_patch(4) caused by checksum flags being added to mbuf flags.	2012-04-22 17:00:52 +00:00
netinet	Use the flags defined in RFC 6525 in the stream reset event.	2012-04-23 20:45:31 +00:00
netinet6	in6_pcblookup_local() still can return a pcb with NULL	2012-03-21 08:43:38 +00:00
netipsec	Add multi-FIB IPv6 support to the core network stack supplementing	2012-02-03 13:08:44 +00:00
netipx	Convert all users of IF_ADDR_LOCK to use new locking macros that specify	2012-01-05 19:00:36 +00:00
netnatm
netncp
netsmb
nfs	Add multi-FIB IPv6 support to the core network stack supplementing	2012-02-03 13:08:44 +00:00
nfsclient	Remove unused thread argument from vtruncbuf().	2012-04-23 13:21:28 +00:00
nfsserver
nlm	jwd@ reported a problem via email to freebsd-fs@ on Aug 25, 2011	2012-01-31 02:11:05 +00:00
ofed	Do not announce IPv6 TSO support yet. The driver seems to make assumptions	2012-04-23 21:50:10 +00:00
opencrypto
pc98	MFi386: revisions 234074 and 234105	2012-04-22 04:36:25 +00:00
pci	intpm: add ATI IXP400 pci id	2012-04-16 10:33:46 +00:00
powerpc	Switch the default I/O memory barrier to eieio, as it should be. This	2012-04-24 13:37:43 +00:00
rpc
security	When allocation of labels on files is implicitly disabled due to MAC	2012-04-08 11:01:49 +00:00
sparc64	Turn on PREEMPTION by default. After fixing several bugs over time, the	2012-04-16 18:29:07 +00:00
sys	Allow for the process information sysctls to accept a thread id in addition	2012-04-23 20:56:05 +00:00
teken
tools	Make vnode_if.awk parse vnode operations with underscores, like VOP_FOO_BAR.	2012-02-21 19:35:59 +00:00
ufs	Remove unused thread argument from ufs_extattr_uepm_lock()/ufs_extattr_uepm_unlock().	2012-04-23 17:56:35 +00:00
vm	Avoid a lock order reversal in pmap_extract_and_hold() from relocking	2012-04-22 17:58:30 +00:00
x86	Add x2apic MSR definitions	2012-04-17 00:54:38 +00:00
xdr
xen	blkif interface comment cleanups. No functional changes	2012-02-29 17:47:01 +00:00
Makefile	Add sys/ofed to the 'make cscope' target.	2012-03-20 18:05:15 +00:00