fd4e475233
o Don't busy wait on powerup. Instead, use the power up interrupt to wait for the card to power up. Don't wait when we're turning the card off, since no interrupt happens in that case. o Convert many of the long DELAYs to tsleeps. We do not run before the timer have stared, so DELAY isn't necessary. More DELAYs can likely be eliminated in the future. o When powering up the card, don't do anything if the card is already powered up (before we'd power cycle it). This means that for most cards we power them up once and then never change the power. o On card eject, mask (by clearing) the CD bit. Before we set it, which was wrong. We don't want to see any CD events past the first one since they need to be debounced. With these changes, I can insert/eject 16bit cards without glitching xmms' sound output. Something very important to the development of better pccard drivers :-)
1583 lines
45 KiB
C
1583 lines
45 KiB
C
/*-
|
|
* Copyright (c) 2002-2004 M. Warner Losh.
|
|
* Copyright (c) 2000-2001 Jonathan Chen.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1998, 1999 and 2000
|
|
* HAYAKAWA Koichi. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by HAYAKAWA Koichi.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Driver for PCI to CardBus Bridge chips
|
|
* and PCI to PCMCIA Bridge chips
|
|
* and ISA to PCMCIA host adapters
|
|
* and C Bus to PCMCIA host adapters
|
|
*
|
|
* References:
|
|
* TI Datasheets:
|
|
* http://www-s.ti.com/cgi-bin/sc/generic2.cgi?family=PCI+CARDBUS+CONTROLLERS
|
|
*
|
|
* Written by Jonathan Chen <jon@freebsd.org>
|
|
* The author would like to acknowledge:
|
|
* * HAYAKAWA Koichi: Author of the NetBSD code for the same thing
|
|
* * Warner Losh: Newbus/newcard guru and author of the pccard side of things
|
|
* * YAMAMOTO Shigeru: Author of another FreeBSD cardbus driver
|
|
* * David Cross: Author of the initial ugly hack for a specific cardbus card
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/systm.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <machine/clock.h>
|
|
|
|
#include <dev/pccard/pccardreg.h>
|
|
#include <dev/pccard/pccardvar.h>
|
|
|
|
#include <dev/exca/excareg.h>
|
|
#include <dev/exca/excavar.h>
|
|
|
|
#include <dev/pccbb/pccbbreg.h>
|
|
#include <dev/pccbb/pccbbvar.h>
|
|
|
|
#include "power_if.h"
|
|
#include "card_if.h"
|
|
#include "pcib_if.h"
|
|
|
|
#define DPRINTF(x) do { if (cbb_debug) printf x; } while (0)
|
|
#define DEVPRINTF(x) do { if (cbb_debug) device_printf x; } while (0)
|
|
|
|
#define PCI_MASK_CONFIG(DEV,REG,MASK,SIZE) \
|
|
pci_write_config(DEV, REG, pci_read_config(DEV, REG, SIZE) MASK, SIZE)
|
|
#define PCI_MASK2_CONFIG(DEV,REG,MASK1,MASK2,SIZE) \
|
|
pci_write_config(DEV, REG, ( \
|
|
pci_read_config(DEV, REG, SIZE) MASK1) MASK2, SIZE)
|
|
|
|
#define CBB_CARD_PRESENT(s) ((s & CBB_STATE_CD) == 0)
|
|
|
|
#define CBB_START_MEM 0x88000000
|
|
#define CBB_START_32_IO 0x1000
|
|
#define CBB_START_16_IO 0x100
|
|
|
|
devclass_t cbb_devclass;
|
|
|
|
/* sysctl vars */
|
|
SYSCTL_NODE(_hw, OID_AUTO, cbb, CTLFLAG_RD, 0, "CBB parameters");
|
|
|
|
/* There's no way to say TUNEABLE_LONG to get the right types */
|
|
u_long cbb_start_mem = CBB_START_MEM;
|
|
TUNABLE_INT("hw.cbb.start_memory", (int *)&cbb_start_mem);
|
|
SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_memory, CTLFLAG_RW,
|
|
&cbb_start_mem, CBB_START_MEM,
|
|
"Starting address for memory allocations");
|
|
|
|
u_long cbb_start_16_io = CBB_START_16_IO;
|
|
TUNABLE_INT("hw.cbb.start_16_io", (int *)&cbb_start_16_io);
|
|
SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_16_io, CTLFLAG_RW,
|
|
&cbb_start_16_io, CBB_START_16_IO,
|
|
"Starting ioport for 16-bit cards");
|
|
|
|
u_long cbb_start_32_io = CBB_START_32_IO;
|
|
TUNABLE_INT("hw.cbb.start_32_io", (int *)&cbb_start_32_io);
|
|
SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_32_io, CTLFLAG_RW,
|
|
&cbb_start_32_io, CBB_START_32_IO,
|
|
"Starting ioport for 32-bit cards");
|
|
|
|
int cbb_debug = 0;
|
|
TUNABLE_INT("hw.cbb.debug", &cbb_debug);
|
|
SYSCTL_ULONG(_hw_cbb, OID_AUTO, debug, CTLFLAG_RW, &cbb_debug, 0,
|
|
"Verbose cardbus bridge debugging");
|
|
|
|
static void cbb_insert(struct cbb_softc *sc);
|
|
static void cbb_removal(struct cbb_softc *sc);
|
|
static uint32_t cbb_detect_voltage(device_t brdev);
|
|
static void cbb_cardbus_reset(device_t brdev);
|
|
static int cbb_cardbus_io_open(device_t brdev, int win, uint32_t start,
|
|
uint32_t end);
|
|
static int cbb_cardbus_mem_open(device_t brdev, int win,
|
|
uint32_t start, uint32_t end);
|
|
static void cbb_cardbus_auto_open(struct cbb_softc *sc, int type);
|
|
static int cbb_cardbus_activate_resource(device_t brdev, device_t child,
|
|
int type, int rid, struct resource *res);
|
|
static int cbb_cardbus_deactivate_resource(device_t brdev,
|
|
device_t child, int type, int rid, struct resource *res);
|
|
static struct resource *cbb_cardbus_alloc_resource(device_t brdev,
|
|
device_t child, int type, int *rid, u_long start,
|
|
u_long end, u_long count, u_int flags);
|
|
static int cbb_cardbus_release_resource(device_t brdev, device_t child,
|
|
int type, int rid, struct resource *res);
|
|
static int cbb_cardbus_power_enable_socket(device_t brdev,
|
|
device_t child);
|
|
static void cbb_cardbus_power_disable_socket(device_t brdev,
|
|
device_t child);
|
|
static void cbb_func_intr(void *arg);
|
|
|
|
static void
|
|
cbb_remove_res(struct cbb_softc *sc, struct resource *res)
|
|
{
|
|
struct cbb_reslist *rle;
|
|
|
|
SLIST_FOREACH(rle, &sc->rl, link) {
|
|
if (rle->res == res) {
|
|
SLIST_REMOVE(&sc->rl, rle, cbb_reslist, link);
|
|
free(rle, M_DEVBUF);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct resource *
|
|
cbb_find_res(struct cbb_softc *sc, int type, int rid)
|
|
{
|
|
struct cbb_reslist *rle;
|
|
|
|
SLIST_FOREACH(rle, &sc->rl, link)
|
|
if (SYS_RES_MEMORY == rle->type && rid == rle->rid)
|
|
return (rle->res);
|
|
return (NULL);
|
|
}
|
|
|
|
static void
|
|
cbb_insert_res(struct cbb_softc *sc, struct resource *res, int type,
|
|
int rid)
|
|
{
|
|
struct cbb_reslist *rle;
|
|
|
|
/*
|
|
* Need to record allocated resource so we can iterate through
|
|
* it later.
|
|
*/
|
|
rle = malloc(sizeof(struct cbb_reslist), M_DEVBUF, M_NOWAIT);
|
|
if (rle == NULL)
|
|
panic("cbb_cardbus_alloc_resource: can't record entry!");
|
|
rle->res = res;
|
|
rle->type = type;
|
|
rle->rid = rid;
|
|
SLIST_INSERT_HEAD(&sc->rl, rle, link);
|
|
}
|
|
|
|
static void
|
|
cbb_destroy_res(struct cbb_softc *sc)
|
|
{
|
|
struct cbb_reslist *rle;
|
|
|
|
while ((rle = SLIST_FIRST(&sc->rl)) != NULL) {
|
|
device_printf(sc->dev, "Danger Will Robinson: Resource "
|
|
"left allocated! This is a bug... "
|
|
"(rid=%x, type=%d, addr=%lx)\n", rle->rid, rle->type,
|
|
rman_get_start(rle->res));
|
|
SLIST_REMOVE_HEAD(&sc->rl, link);
|
|
free(rle, M_DEVBUF);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Disable function interrupts by telling the bridge to generate IRQ1
|
|
* interrupts. These interrupts aren't really generated by the chip, since
|
|
* IRQ1 is reserved. Some chipsets assert INTA# inappropriately during
|
|
* initialization, so this helps to work around the problem.
|
|
*
|
|
* XXX We can't do this workaround for all chipsets, because this
|
|
* XXX causes interference with the keyboard because somechipsets will
|
|
* XXX actually signal IRQ1 over their serial interrupt connections to
|
|
* XXX the south bridge. Disable it it for now.
|
|
*/
|
|
void
|
|
cbb_disable_func_intr(struct cbb_softc *sc)
|
|
{
|
|
#if 0
|
|
uint8_t reg;
|
|
|
|
reg = (exca_getb(&sc->exca[0], EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) |
|
|
EXCA_INTR_IRQ_RESERVED1;
|
|
exca_putb(&sc->exca[0], EXCA_INTR, reg);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Enable function interrupts. We turn on function interrupts when the card
|
|
* requests an interrupt. The PCMCIA standard says that we should set
|
|
* the lower 4 bits to 0 to route via PCI. Note: we call this for both
|
|
* CardBus and R2 (PC Card) cases, but it should have no effect on CardBus
|
|
* cards.
|
|
*/
|
|
static void
|
|
cbb_enable_func_intr(struct cbb_softc *sc)
|
|
{
|
|
uint8_t reg;
|
|
|
|
reg = (exca_getb(&sc->exca[0], EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) |
|
|
EXCA_INTR_IRQ_NONE;
|
|
exca_putb(&sc->exca[0], EXCA_INTR, reg);
|
|
}
|
|
|
|
int
|
|
cbb_detach(device_t brdev)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
int numdevs;
|
|
device_t *devlist;
|
|
int tmp;
|
|
int error;
|
|
|
|
device_get_children(brdev, &devlist, &numdevs);
|
|
|
|
error = 0;
|
|
for (tmp = 0; tmp < numdevs; tmp++) {
|
|
if (device_detach(devlist[tmp]) == 0)
|
|
device_delete_child(brdev, devlist[tmp]);
|
|
else
|
|
error++;
|
|
}
|
|
free(devlist, M_TEMP);
|
|
if (error > 0)
|
|
return (ENXIO);
|
|
|
|
mtx_lock(&sc->mtx);
|
|
/*
|
|
* XXX do we teardown all the ones still registered to guard against
|
|
* XXX buggy client drivers?
|
|
*/
|
|
bus_teardown_intr(brdev, sc->irq_res, sc->intrhand);
|
|
sc->flags |= CBB_KTHREAD_DONE;
|
|
if (sc->flags & CBB_KTHREAD_RUNNING) {
|
|
cv_broadcast(&sc->cv);
|
|
msleep(sc->event_thread, &sc->mtx, PWAIT, "cbbun", 0);
|
|
}
|
|
mtx_unlock(&sc->mtx);
|
|
|
|
bus_release_resource(brdev, SYS_RES_IRQ, 0, sc->irq_res);
|
|
bus_release_resource(brdev, SYS_RES_MEMORY, CBBR_SOCKBASE,
|
|
sc->base_res);
|
|
mtx_destroy(&sc->mtx);
|
|
cv_destroy(&sc->cv);
|
|
cv_destroy(&sc->powercv);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
cbb_shutdown(device_t brdev)
|
|
{
|
|
struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(brdev);
|
|
/* properly reset everything at shutdown */
|
|
|
|
PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, |CBBM_BRIDGECTRL_RESET, 2);
|
|
exca_clrb(&sc->exca[0], EXCA_INTR, EXCA_INTR_RESET);
|
|
|
|
cbb_set(sc, CBB_SOCKET_MASK, 0);
|
|
|
|
cbb_power(brdev, CARD_OFF);
|
|
|
|
exca_putb(&sc->exca[0], EXCA_ADDRWIN_ENABLE, 0);
|
|
pci_write_config(brdev, CBBR_MEMBASE0, 0, 4);
|
|
pci_write_config(brdev, CBBR_MEMLIMIT0, 0, 4);
|
|
pci_write_config(brdev, CBBR_MEMBASE1, 0, 4);
|
|
pci_write_config(brdev, CBBR_MEMLIMIT1, 0, 4);
|
|
pci_write_config(brdev, CBBR_IOBASE0, 0, 4);
|
|
pci_write_config(brdev, CBBR_IOLIMIT0, 0, 4);
|
|
pci_write_config(brdev, CBBR_IOBASE1, 0, 4);
|
|
pci_write_config(brdev, CBBR_IOLIMIT1, 0, 4);
|
|
pci_write_config(brdev, PCIR_COMMAND, 0, 2);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
cbb_setup_intr(device_t dev, device_t child, struct resource *irq,
|
|
int flags, driver_intr_t *intr, void *arg, void **cookiep)
|
|
{
|
|
struct cbb_intrhand *ih;
|
|
struct cbb_softc *sc = device_get_softc(dev);
|
|
int err;
|
|
|
|
/*
|
|
* Well, this is no longer strictly true. You can have multiple
|
|
* FAST ISRs, but can't mix fast and slow, so we have to assume
|
|
* least common denominator until the base system supports mixing
|
|
* and matching better.
|
|
*/
|
|
if ((flags & INTR_FAST) != 0)
|
|
return (EINVAL);
|
|
ih = malloc(sizeof(struct cbb_intrhand), M_DEVBUF, M_NOWAIT);
|
|
if (ih == NULL)
|
|
return (ENOMEM);
|
|
*cookiep = ih;
|
|
ih->intr = intr;
|
|
ih->arg = arg;
|
|
ih->sc = sc;
|
|
/*
|
|
* XXX need to turn on ISA interrupts, if we ever support them, but
|
|
* XXX for now that's all we need to do.
|
|
*/
|
|
err = BUS_SETUP_INTR(device_get_parent(dev), child, irq, flags,
|
|
cbb_func_intr, ih, &ih->cookie);
|
|
if (err != 0) {
|
|
free(ih, M_DEVBUF);
|
|
return (err);
|
|
}
|
|
STAILQ_INSERT_TAIL(&sc->intr_handlers, ih, entries);
|
|
cbb_enable_func_intr(sc);
|
|
sc->flags |= CBB_CARD_OK;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
cbb_teardown_intr(device_t dev, device_t child, struct resource *irq,
|
|
void *cookie)
|
|
{
|
|
struct cbb_intrhand *ih;
|
|
struct cbb_softc *sc = device_get_softc(dev);
|
|
int err;
|
|
|
|
/* XXX Need to do different things for ISA interrupts. */
|
|
ih = (struct cbb_intrhand *) cookie;
|
|
err = BUS_TEARDOWN_INTR(device_get_parent(dev), child, irq,
|
|
ih->cookie);
|
|
if (err != 0)
|
|
return (err);
|
|
STAILQ_REMOVE(&sc->intr_handlers, ih, cbb_intrhand, entries);
|
|
free(ih, M_DEVBUF);
|
|
return (0);
|
|
}
|
|
|
|
|
|
void
|
|
cbb_driver_added(device_t brdev, driver_t *driver)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
device_t *devlist;
|
|
device_t dev;
|
|
int tmp;
|
|
int numdevs;
|
|
int wake = 0;
|
|
|
|
DEVICE_IDENTIFY(driver, brdev);
|
|
device_get_children(brdev, &devlist, &numdevs);
|
|
for (tmp = 0; tmp < numdevs; tmp++) {
|
|
dev = devlist[tmp];
|
|
if (device_get_state(dev) == DS_NOTPRESENT &&
|
|
device_probe_and_attach(dev) == 0)
|
|
wake++;
|
|
}
|
|
free(devlist, M_TEMP);
|
|
|
|
if (wake > 0) {
|
|
mtx_lock(&sc->mtx);
|
|
cv_signal(&sc->cv);
|
|
mtx_unlock(&sc->mtx);
|
|
}
|
|
}
|
|
|
|
void
|
|
cbb_child_detached(device_t brdev, device_t child)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
if (child != sc->cbdev && child != sc->exca[0].pccarddev)
|
|
device_printf(brdev, "Unknown child detached: %s\n",
|
|
device_get_nameunit(child));
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* Kthreads */
|
|
/************************************************************************/
|
|
|
|
void
|
|
cbb_event_thread(void *arg)
|
|
{
|
|
struct cbb_softc *sc = arg;
|
|
uint32_t status;
|
|
int err;
|
|
int not_a_card = 0;
|
|
|
|
sc->flags |= CBB_KTHREAD_RUNNING;
|
|
while ((sc->flags & CBB_KTHREAD_DONE) == 0) {
|
|
/*
|
|
* We take out Giant here because we need it deep,
|
|
* down in the bowels of the vm system for mapping the
|
|
* memory we need to read the CIS. In addition, since
|
|
* we are adding/deleting devices from the dev tree,
|
|
* and that code isn't MP safe, we have to hold Giant.
|
|
*/
|
|
mtx_lock(&Giant);
|
|
status = cbb_get(sc, CBB_SOCKET_STATE);
|
|
DPRINTF(("Status is 0x%x\n", status));
|
|
if (!CBB_CARD_PRESENT(status)) {
|
|
not_a_card = 0; /* We know card type */
|
|
cbb_removal(sc);
|
|
} else if (status & CBB_STATE_NOT_A_CARD) {
|
|
/*
|
|
* Up to 20 times, try to rescan the card when we
|
|
* see NOT_A_CARD.
|
|
*/
|
|
if (not_a_card++ < 20) {
|
|
DEVPRINTF((sc->dev,
|
|
"Not a card bit set, rescanning\n"));
|
|
cbb_setb(sc, CBB_SOCKET_FORCE, CBB_FORCE_CV_TEST);
|
|
} else {
|
|
device_printf(sc->dev,
|
|
"Can't determine card type\n");
|
|
}
|
|
} else {
|
|
not_a_card = 0; /* We know card type */
|
|
cbb_insert(sc);
|
|
}
|
|
mtx_unlock(&Giant);
|
|
|
|
/*
|
|
* Wait until it has been 1s since the last time we
|
|
* get an interrupt. We handle the rest of the interrupt
|
|
* at the top of the loop. Although we clear the bit in the
|
|
* ISR, we signal sc->cv from the detach path after we've
|
|
* set the CBB_KTHREAD_DONE bit, so we can't do a simple
|
|
* 1s sleep here.
|
|
*
|
|
* In our ISR, we turn off the card changed interrupt. Turn
|
|
* them back on here before we wait for them to happen. We
|
|
* turn them on/off so that we can tolerate a large latency
|
|
* between the time we signal cbb_event_thread and it gets
|
|
* a chance to run.
|
|
*/
|
|
mtx_lock(&sc->mtx);
|
|
cbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD);
|
|
cv_wait(&sc->cv, &sc->mtx);
|
|
err = 0;
|
|
while (err != EWOULDBLOCK &&
|
|
(sc->flags & CBB_KTHREAD_DONE) == 0)
|
|
err = cv_timedwait(&sc->cv, &sc->mtx, 1 * hz);
|
|
mtx_unlock(&sc->mtx);
|
|
}
|
|
sc->flags &= ~CBB_KTHREAD_RUNNING;
|
|
kthread_exit(0);
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* Insert/removal */
|
|
/************************************************************************/
|
|
|
|
static void
|
|
cbb_insert(struct cbb_softc *sc)
|
|
{
|
|
uint32_t sockevent, sockstate;
|
|
|
|
sockevent = cbb_get(sc, CBB_SOCKET_EVENT);
|
|
sockstate = cbb_get(sc, CBB_SOCKET_STATE);
|
|
|
|
DEVPRINTF((sc->dev, "card inserted: event=0x%08x, state=%08x\n",
|
|
sockevent, sockstate));
|
|
|
|
if (sockstate & CBB_STATE_R2_CARD) {
|
|
if (sc->exca[0].pccarddev) {
|
|
sc->flags |= CBB_16BIT_CARD;
|
|
exca_insert(&sc->exca[0]);
|
|
}
|
|
} else if (sockstate & CBB_STATE_CB_CARD) {
|
|
if (sc->cbdev != NULL) {
|
|
sc->flags &= ~CBB_16BIT_CARD;
|
|
CARD_ATTACH_CARD(sc->cbdev);
|
|
} else {
|
|
device_printf(sc->dev,
|
|
"CardBus card inserted, but no cardbus bus.\n");
|
|
}
|
|
} else {
|
|
/*
|
|
* We should power the card down, and try again a couple of
|
|
* times if this happens. XXX
|
|
*/
|
|
device_printf(sc->dev, "Unsupported card type detected\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
cbb_removal(struct cbb_softc *sc)
|
|
{
|
|
sc->flags &= ~CBB_CARD_OK;
|
|
if (sc->flags & CBB_16BIT_CARD) {
|
|
exca_removal(&sc->exca[0]);
|
|
} else {
|
|
if (sc->cbdev != NULL)
|
|
CARD_DETACH_CARD(sc->cbdev);
|
|
}
|
|
cbb_destroy_res(sc);
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* Interrupt Handler */
|
|
/************************************************************************/
|
|
|
|
/*
|
|
* Since we touch hardware in the worst case, we don't need to use atomic
|
|
* ops on the CARD_OK tests. They would save us a trip to the hardware
|
|
* if CARD_OK was recently cleared and the caches haven't updated yet.
|
|
* However, an atomic op costs between 100-200 CPU cycles. On a 3GHz
|
|
* machine, this is about 33-66ns, whereas a trip the the hardware
|
|
* is about that. On slower machines, the cost is even higher, so the
|
|
* trip to the hardware is cheaper and achieves the same ends that
|
|
* a fully locked operation would give us.
|
|
*
|
|
* This is a separate routine because we'd have to use locking and/or
|
|
* other synchronization in cbb_intr to do this there. That would be
|
|
* even more expensive.
|
|
*
|
|
* I need to investigate what this means for a SMP machine with multiple
|
|
* CPUs servicing the ISR when an eject happens. In the case of a dirty
|
|
* eject, CD glitches and we might read 'card present' from the hardware
|
|
* due to this jitter. If we assumed that cbb_intr() ran before
|
|
* cbb_func_intr(), we could just check the SOCKET_MASK register and if
|
|
* CD changes were clear there, then we'd know the card was gone.
|
|
*/
|
|
static void
|
|
cbb_func_intr(void *arg)
|
|
{
|
|
struct cbb_intrhand *ih = (struct cbb_intrhand *)arg;
|
|
struct cbb_softc *sc = ih->sc;
|
|
|
|
/*
|
|
* Make sure that the card is really there.
|
|
*/
|
|
if ((sc->flags & CBB_CARD_OK) == 0)
|
|
return;
|
|
if (!CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) {
|
|
sc->flags &= ~CBB_CARD_OK;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* nb: don't have to check for giant or not, since that's done
|
|
* in the ISR dispatch
|
|
*/
|
|
(*ih->intr)(ih->arg);
|
|
}
|
|
|
|
void
|
|
cbb_intr(void *arg)
|
|
{
|
|
struct cbb_softc *sc = arg;
|
|
uint32_t sockevent;
|
|
|
|
/*
|
|
* This ISR needs work XXX
|
|
*/
|
|
sockevent = cbb_get(sc, CBB_SOCKET_EVENT);
|
|
if (sockevent != 0) {
|
|
/* ack the interrupt */
|
|
cbb_setb(sc, CBB_SOCKET_EVENT, sockevent);
|
|
|
|
/*
|
|
* If anything has happened to the socket, we assume that
|
|
* the card is no longer OK, and we shouldn't call its
|
|
* ISR. We set CARD_OK as soon as we've attached the
|
|
* card. This helps in a noisy eject, which happens
|
|
* all too often when users are ejecting their PC Cards.
|
|
*
|
|
* We use this method in preference to checking to see if
|
|
* the card is still there because the check suffers from
|
|
* a race condition in the bouncing case. Prior versions
|
|
* of the pccard software used a similar trick and achieved
|
|
* excellent results.
|
|
*/
|
|
if (sockevent & CBB_SOCKET_EVENT_CD) {
|
|
mtx_lock(&sc->mtx);
|
|
cbb_clrb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD);
|
|
sc->flags &= ~CBB_CARD_OK;
|
|
cbb_disable_func_intr(sc);
|
|
cv_signal(&sc->cv);
|
|
mtx_unlock(&sc->mtx);
|
|
}
|
|
/*
|
|
* If we get a power interrupt, wakeup anybody that might
|
|
* be waiting for one.
|
|
*/
|
|
if (sockevent & CBB_SOCKET_EVENT_POWER) {
|
|
mtx_lock(&sc->mtx);
|
|
sc->powerintr++;
|
|
cv_signal(&sc->powercv);
|
|
mtx_unlock(&sc->mtx);
|
|
}
|
|
}
|
|
/*
|
|
* Some chips also require us to read the old ExCA registe for
|
|
* card status change when we route CSC vis PCI. This isn't supposed
|
|
* to be required, but it clears the interrupt state on some chipsets.
|
|
* Maybe there's a setting that would obviate its need. Maybe we
|
|
* should test the status bits and deal with them, but so far we've
|
|
* not found any machines that don't also give us the socket status
|
|
* indication above.
|
|
*
|
|
* We have to call this unconditionally because some bridges deliver
|
|
* the even independent of the CBB_SOCKET_EVENT_CD above.
|
|
*/
|
|
exca_getb(&sc->exca[0], EXCA_CSC);
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* Generic Power functions */
|
|
/************************************************************************/
|
|
|
|
static uint32_t
|
|
cbb_detect_voltage(device_t brdev)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
uint32_t psr;
|
|
uint32_t vol = CARD_UKN_CARD;
|
|
|
|
psr = cbb_get(sc, CBB_SOCKET_STATE);
|
|
|
|
if (psr & CBB_STATE_5VCARD)
|
|
vol |= CARD_5V_CARD;
|
|
if (psr & CBB_STATE_3VCARD)
|
|
vol |= CARD_3V_CARD;
|
|
if (psr & CBB_STATE_XVCARD)
|
|
vol |= CARD_XV_CARD;
|
|
if (psr & CBB_STATE_YVCARD)
|
|
vol |= CARD_YV_CARD;
|
|
|
|
return (vol);
|
|
}
|
|
|
|
static uint8_t
|
|
cbb_o2micro_power_hack(struct cbb_softc *sc)
|
|
{
|
|
uint8_t reg;
|
|
|
|
/*
|
|
* Issue #2: INT# not qualified with IRQ Routing Bit. An
|
|
* unexpected PCI INT# may be generated during PC-Card
|
|
* initialization even with the IRQ Routing Bit Set with some
|
|
* PC-Cards.
|
|
*
|
|
* This is a two part issue. The first part is that some of
|
|
* our older controllers have an issue in which the slot's PCI
|
|
* INT# is NOT qualified by the IRQ routing bit (PCI reg. 3Eh
|
|
* bit 7). Regardless of the IRQ routing bit, if NO ISA IRQ
|
|
* is selected (ExCA register 03h bits 3:0, of the slot, are
|
|
* cleared) we will generate INT# if IREQ# is asserted. The
|
|
* second part is because some PC-Cards prematurally assert
|
|
* IREQ# before the ExCA registers are fully programmed. This
|
|
* in turn asserts INT# because ExCA register 03h bits 3:0
|
|
* (ISA IRQ Select) are not yet programmed.
|
|
*
|
|
* The fix for this issue, which will work for any controller
|
|
* (old or new), is to set ExCA register 03h bits 3:0 = 0001b
|
|
* (select IRQ1), of the slot, before turning on slot power.
|
|
* Selecting IRQ1 will result in INT# NOT being asserted
|
|
* (because IRQ1 is selected), and IRQ1 won't be asserted
|
|
* because our controllers don't generate IRQ1.
|
|
*/
|
|
reg = exca_getb(&sc->exca[0], EXCA_INTR);
|
|
exca_putb(&sc->exca[0], EXCA_INTR, (reg & 0xf0) | 1);
|
|
return (reg);
|
|
}
|
|
|
|
/*
|
|
* Restore the damage that cbb_o2micro_power_hack does to EXCA_INTR so
|
|
* we don't have an interrupt storm on power on. This has the efect of
|
|
* disabling card status change interrupts for the duration of poweron.
|
|
*/
|
|
static void
|
|
cbb_o2micro_power_hack2(struct cbb_softc *sc, uint8_t reg)
|
|
{
|
|
exca_putb(&sc->exca[0], EXCA_INTR, reg);
|
|
}
|
|
|
|
int
|
|
cbb_power(device_t brdev, int volts)
|
|
{
|
|
uint32_t status, sock_ctrl;
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
int cnt;
|
|
int retval = 0;
|
|
int on = 0;
|
|
uint8_t reg = 0;
|
|
|
|
sock_ctrl = cbb_get(sc, CBB_SOCKET_CONTROL);
|
|
|
|
sock_ctrl &= ~CBB_SOCKET_CTRL_VCCMASK;
|
|
switch (volts & CARD_VCCMASK) {
|
|
case 5:
|
|
sock_ctrl |= CBB_SOCKET_CTRL_VCC_5V;
|
|
on++;
|
|
break;
|
|
case 3:
|
|
sock_ctrl |= CBB_SOCKET_CTRL_VCC_3V;
|
|
on++;
|
|
break;
|
|
case XV:
|
|
sock_ctrl |= CBB_SOCKET_CTRL_VCC_XV;
|
|
on++;
|
|
break;
|
|
case YV:
|
|
sock_ctrl |= CBB_SOCKET_CTRL_VCC_YV;
|
|
on++;
|
|
break;
|
|
case 0:
|
|
break;
|
|
default:
|
|
return (0); /* power NEVER changed */
|
|
}
|
|
|
|
/* VPP == VCC */
|
|
sock_ctrl &= ~CBB_SOCKET_CTRL_VPPMASK;
|
|
sock_ctrl |= ((sock_ctrl >> 4) & 0x07);
|
|
|
|
if (cbb_get(sc, CBB_SOCKET_CONTROL) == sock_ctrl)
|
|
return (1); /* no change necessary */
|
|
DEVPRINTF((sc->dev, "cbb_power: %dV\n", volts));
|
|
if (volts != 0 && sc->chipset == CB_O2MICRO)
|
|
reg = cbb_o2micro_power_hack(sc);
|
|
|
|
cbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_POWER);
|
|
cbb_set(sc, CBB_SOCKET_CONTROL, sock_ctrl);
|
|
if (on) {
|
|
mtx_lock(&sc->mtx);
|
|
cnt = sc->powerintr;
|
|
/* XXX timeout needed! */
|
|
while (cnt == sc->powerintr)
|
|
cv_wait(&sc->powercv, &sc->mtx);
|
|
mtx_unlock(&sc->mtx);
|
|
}
|
|
cbb_clrb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_POWER);
|
|
status = cbb_get(sc, CBB_SOCKET_STATE);
|
|
if (on) {
|
|
if ((status & CBB_STATE_POWER_CYCLE) == 0)
|
|
device_printf(sc->dev, "Power not on?\n");
|
|
}
|
|
if (status & CBB_STATE_BAD_VCC_REQ) {
|
|
device_printf(sc->dev, "Bad Vcc requested\n");
|
|
goto done;
|
|
}
|
|
retval = 1;
|
|
done:;
|
|
if (volts != 0 && sc->chipset == CB_O2MICRO)
|
|
cbb_o2micro_power_hack2(sc, reg);
|
|
return (retval);
|
|
}
|
|
|
|
static int
|
|
cbb_current_voltage(device_t brdev)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
uint32_t ctrl;
|
|
|
|
ctrl = cbb_get(sc, CBB_SOCKET_CONTROL);
|
|
switch (ctrl & CBB_SOCKET_CTRL_VCCMASK) {
|
|
case CBB_SOCKET_CTRL_VCC_5V:
|
|
return CARD_5V_CARD;
|
|
case CBB_SOCKET_CTRL_VCC_3V:
|
|
return CARD_3V_CARD;
|
|
case CBB_SOCKET_CTRL_VCC_XV:
|
|
return CARD_XV_CARD;
|
|
case CBB_SOCKET_CTRL_VCC_YV:
|
|
return CARD_YV_CARD;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* detect the voltage for the card, and set it. Since the power
|
|
* used is the square of the voltage, lower voltages is a big win
|
|
* and what Windows does (and what Microsoft prefers). The MS paper
|
|
* also talks about preferring the CIS entry as well, but that has
|
|
* to be done elsewhere. We also optimize power sequencing here
|
|
* and don't change things if we're already powered up at a supported
|
|
* voltage.
|
|
*
|
|
* In addition, we power up with OE disabled. We'll set it later
|
|
* in the power up sequence.
|
|
*/
|
|
static int
|
|
cbb_do_power(device_t brdev)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
uint32_t voltage, curpwr;
|
|
uint32_t status;
|
|
|
|
/* Don't enable OE (output enable) until power stable */
|
|
exca_clrb(&sc->exca[0], EXCA_PWRCTL, EXCA_PWRCTL_OE);
|
|
|
|
voltage = cbb_detect_voltage(brdev);
|
|
curpwr = cbb_current_voltage(brdev);
|
|
status = cbb_get(sc, CBB_SOCKET_STATE);
|
|
if ((status & CBB_STATE_POWER_CYCLE) && (voltage & curpwr))
|
|
return 0;
|
|
/* Prefer lowest voltage supported */
|
|
cbb_power(brdev, CARD_OFF);
|
|
if (voltage & CARD_YV_CARD)
|
|
cbb_power(brdev, CARD_VCC(YV));
|
|
else if (voltage & CARD_XV_CARD)
|
|
cbb_power(brdev, CARD_VCC(XV));
|
|
else if (voltage & CARD_3V_CARD)
|
|
cbb_power(brdev, CARD_VCC(3));
|
|
else if (voltage & CARD_5V_CARD)
|
|
cbb_power(brdev, CARD_VCC(5));
|
|
else {
|
|
device_printf(brdev, "Unknown card voltage\n");
|
|
return (ENXIO);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* CardBus power functions */
|
|
/************************************************************************/
|
|
|
|
static void
|
|
cbb_cardbus_reset(device_t brdev)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
int delay_us;
|
|
|
|
delay_us = sc->chipset == CB_RF5C47X ? 400*1000 : 20*1000;
|
|
|
|
PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, |CBBM_BRIDGECTRL_RESET, 2);
|
|
|
|
DELAY(delay_us);
|
|
|
|
/* If a card exists, unreset it! */
|
|
if (CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) {
|
|
PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL,
|
|
&~CBBM_BRIDGECTRL_RESET, 2);
|
|
DELAY(delay_us);
|
|
}
|
|
}
|
|
|
|
static int
|
|
cbb_cardbus_power_enable_socket(device_t brdev, device_t child)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
int err;
|
|
|
|
if (!CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE)))
|
|
return (ENODEV);
|
|
|
|
err = cbb_do_power(brdev);
|
|
if (err)
|
|
return (err);
|
|
cbb_cardbus_reset(brdev);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
cbb_cardbus_power_disable_socket(device_t brdev, device_t child)
|
|
{
|
|
cbb_power(brdev, CARD_OFF);
|
|
cbb_cardbus_reset(brdev);
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* CardBus Resource */
|
|
/************************************************************************/
|
|
|
|
static int
|
|
cbb_cardbus_io_open(device_t brdev, int win, uint32_t start, uint32_t end)
|
|
{
|
|
int basereg;
|
|
int limitreg;
|
|
|
|
if ((win < 0) || (win > 1)) {
|
|
DEVPRINTF((brdev,
|
|
"cbb_cardbus_io_open: window out of range %d\n", win));
|
|
return (EINVAL);
|
|
}
|
|
|
|
basereg = win * 8 + CBBR_IOBASE0;
|
|
limitreg = win * 8 + CBBR_IOLIMIT0;
|
|
|
|
pci_write_config(brdev, basereg, start, 4);
|
|
pci_write_config(brdev, limitreg, end, 4);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
cbb_cardbus_mem_open(device_t brdev, int win, uint32_t start, uint32_t end)
|
|
{
|
|
int basereg;
|
|
int limitreg;
|
|
|
|
if ((win < 0) || (win > 1)) {
|
|
DEVPRINTF((brdev,
|
|
"cbb_cardbus_mem_open: window out of range %d\n", win));
|
|
return (EINVAL);
|
|
}
|
|
|
|
basereg = win*8 + CBBR_MEMBASE0;
|
|
limitreg = win*8 + CBBR_MEMLIMIT0;
|
|
|
|
pci_write_config(brdev, basereg, start, 4);
|
|
pci_write_config(brdev, limitreg, end, 4);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* XXX The following function belongs in the pci bus layer.
|
|
*/
|
|
static void
|
|
cbb_cardbus_auto_open(struct cbb_softc *sc, int type)
|
|
{
|
|
uint32_t starts[2];
|
|
uint32_t ends[2];
|
|
struct cbb_reslist *rle;
|
|
int align;
|
|
int prefetchable[2];
|
|
uint32_t reg;
|
|
|
|
starts[0] = starts[1] = 0xffffffff;
|
|
ends[0] = ends[1] = 0;
|
|
|
|
if (type == SYS_RES_MEMORY)
|
|
align = CBB_MEMALIGN;
|
|
else if (type == SYS_RES_IOPORT)
|
|
align = CBB_IOALIGN;
|
|
else
|
|
align = 1;
|
|
|
|
/*
|
|
* This looks somewhat bogus, and doesn't seem to really respect
|
|
* alignment. The alignment stuff is happening too late (it
|
|
* should happen at allocation time, not activation time) and
|
|
* this code looks generally to be too complex for the purpose
|
|
* it surves.
|
|
*/
|
|
SLIST_FOREACH(rle, &sc->rl, link) {
|
|
if (rle->type != type)
|
|
;
|
|
else if (rle->res == NULL) {
|
|
device_printf(sc->dev, "WARNING: Resource not reserved? "
|
|
"(type=%d, addr=%lx)\n",
|
|
rle->type, rman_get_start(rle->res));
|
|
} else if (!(rman_get_flags(rle->res) & RF_ACTIVE)) {
|
|
/* XXX */
|
|
} else if (starts[0] == 0xffffffff) {
|
|
starts[0] = rman_get_start(rle->res);
|
|
ends[0] = rman_get_end(rle->res);
|
|
prefetchable[0] =
|
|
rman_get_flags(rle->res) & RF_PREFETCHABLE;
|
|
} else if (rman_get_end(rle->res) > ends[0] &&
|
|
rman_get_start(rle->res) - ends[0] <
|
|
CBB_AUTO_OPEN_SMALLHOLE && prefetchable[0] ==
|
|
(rman_get_flags(rle->res) & RF_PREFETCHABLE)) {
|
|
ends[0] = rman_get_end(rle->res);
|
|
} else if (rman_get_start(rle->res) < starts[0] &&
|
|
starts[0] - rman_get_end(rle->res) <
|
|
CBB_AUTO_OPEN_SMALLHOLE && prefetchable[0] ==
|
|
(rman_get_flags(rle->res) & RF_PREFETCHABLE)) {
|
|
starts[0] = rman_get_start(rle->res);
|
|
} else if (starts[1] == 0xffffffff) {
|
|
starts[1] = rman_get_start(rle->res);
|
|
ends[1] = rman_get_end(rle->res);
|
|
prefetchable[1] =
|
|
rman_get_flags(rle->res) & RF_PREFETCHABLE;
|
|
} else if (rman_get_end(rle->res) > ends[1] &&
|
|
rman_get_start(rle->res) - ends[1] <
|
|
CBB_AUTO_OPEN_SMALLHOLE && prefetchable[1] ==
|
|
(rman_get_flags(rle->res) & RF_PREFETCHABLE)) {
|
|
ends[1] = rman_get_end(rle->res);
|
|
} else if (rman_get_start(rle->res) < starts[1] &&
|
|
starts[1] - rman_get_end(rle->res) <
|
|
CBB_AUTO_OPEN_SMALLHOLE && prefetchable[1] ==
|
|
(rman_get_flags(rle->res) & RF_PREFETCHABLE)) {
|
|
starts[1] = rman_get_start(rle->res);
|
|
} else {
|
|
uint32_t diffs[2];
|
|
int win;
|
|
|
|
diffs[0] = diffs[1] = 0xffffffff;
|
|
if (rman_get_start(rle->res) > ends[0])
|
|
diffs[0] = rman_get_start(rle->res) - ends[0];
|
|
else if (rman_get_end(rle->res) < starts[0])
|
|
diffs[0] = starts[0] - rman_get_end(rle->res);
|
|
if (rman_get_start(rle->res) > ends[1])
|
|
diffs[1] = rman_get_start(rle->res) - ends[1];
|
|
else if (rman_get_end(rle->res) < starts[1])
|
|
diffs[1] = starts[1] - rman_get_end(rle->res);
|
|
|
|
win = (diffs[0] <= diffs[1])?0:1;
|
|
if (rman_get_start(rle->res) > ends[win])
|
|
ends[win] = rman_get_end(rle->res);
|
|
else if (rman_get_end(rle->res) < starts[win])
|
|
starts[win] = rman_get_start(rle->res);
|
|
if (!(rman_get_flags(rle->res) & RF_PREFETCHABLE))
|
|
prefetchable[win] = 0;
|
|
}
|
|
|
|
if (starts[0] != 0xffffffff)
|
|
starts[0] -= starts[0] % align;
|
|
if (starts[1] != 0xffffffff)
|
|
starts[1] -= starts[1] % align;
|
|
if (ends[0] % align != 0)
|
|
ends[0] += align - ends[0] % align - 1;
|
|
if (ends[1] % align != 0)
|
|
ends[1] += align - ends[1] % align - 1;
|
|
}
|
|
|
|
if (type == SYS_RES_MEMORY) {
|
|
cbb_cardbus_mem_open(sc->dev, 0, starts[0], ends[0]);
|
|
cbb_cardbus_mem_open(sc->dev, 1, starts[1], ends[1]);
|
|
reg = pci_read_config(sc->dev, CBBR_BRIDGECTRL, 2);
|
|
reg &= ~(CBBM_BRIDGECTRL_PREFETCH_0|
|
|
CBBM_BRIDGECTRL_PREFETCH_1);
|
|
reg |= (prefetchable[0]?CBBM_BRIDGECTRL_PREFETCH_0:0)|
|
|
(prefetchable[1]?CBBM_BRIDGECTRL_PREFETCH_1:0);
|
|
pci_write_config(sc->dev, CBBR_BRIDGECTRL, reg, 2);
|
|
} else if (type == SYS_RES_IOPORT) {
|
|
cbb_cardbus_io_open(sc->dev, 0, starts[0], ends[0]);
|
|
cbb_cardbus_io_open(sc->dev, 1, starts[1], ends[1]);
|
|
}
|
|
}
|
|
|
|
static int
|
|
cbb_cardbus_activate_resource(device_t brdev, device_t child, int type,
|
|
int rid, struct resource *res)
|
|
{
|
|
int ret;
|
|
|
|
ret = BUS_ACTIVATE_RESOURCE(device_get_parent(brdev), child,
|
|
type, rid, res);
|
|
if (ret != 0)
|
|
return (ret);
|
|
cbb_cardbus_auto_open(device_get_softc(brdev), type);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
cbb_cardbus_deactivate_resource(device_t brdev, device_t child, int type,
|
|
int rid, struct resource *res)
|
|
{
|
|
int ret;
|
|
|
|
ret = BUS_DEACTIVATE_RESOURCE(device_get_parent(brdev), child,
|
|
type, rid, res);
|
|
if (ret != 0)
|
|
return (ret);
|
|
cbb_cardbus_auto_open(device_get_softc(brdev), type);
|
|
return (0);
|
|
}
|
|
|
|
static struct resource *
|
|
cbb_cardbus_alloc_resource(device_t brdev, device_t child, int type,
|
|
int *rid, u_long start, u_long end, u_long count, u_int flags)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
int tmp;
|
|
struct resource *res;
|
|
u_long align;
|
|
|
|
switch (type) {
|
|
case SYS_RES_IRQ:
|
|
tmp = rman_get_start(sc->irq_res);
|
|
if (start > tmp || end < tmp || count != 1) {
|
|
device_printf(child, "requested interrupt %ld-%ld,"
|
|
"count = %ld not supported by cbb\n",
|
|
start, end, count);
|
|
return (NULL);
|
|
}
|
|
start = end = tmp;
|
|
flags |= RF_SHAREABLE;
|
|
break;
|
|
case SYS_RES_IOPORT:
|
|
if (start <= cbb_start_32_io)
|
|
start = cbb_start_32_io;
|
|
if (end < start)
|
|
end = start;
|
|
break;
|
|
case SYS_RES_MEMORY:
|
|
if (start <= cbb_start_mem)
|
|
start = cbb_start_mem;
|
|
if (end < start)
|
|
end = start;
|
|
if (count < CBB_MEMALIGN)
|
|
align = CBB_MEMALIGN;
|
|
else
|
|
align = count;
|
|
if (align > (1 << RF_ALIGNMENT(flags)))
|
|
flags = (flags & ~RF_ALIGNMENT_MASK) |
|
|
rman_make_alignment_flags(align);
|
|
break;
|
|
}
|
|
|
|
res = BUS_ALLOC_RESOURCE(device_get_parent(brdev), child, type, rid,
|
|
start, end, count, flags & ~RF_ACTIVE);
|
|
if (res == NULL) {
|
|
printf("cbb alloc res fail\n");
|
|
return (NULL);
|
|
}
|
|
cbb_insert_res(sc, res, type, *rid);
|
|
if (flags & RF_ACTIVE)
|
|
if (bus_activate_resource(child, type, *rid, res) != 0) {
|
|
bus_release_resource(child, type, *rid, res);
|
|
return (NULL);
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
|
|
static int
|
|
cbb_cardbus_release_resource(device_t brdev, device_t child, int type,
|
|
int rid, struct resource *res)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
int error;
|
|
|
|
if (rman_get_flags(res) & RF_ACTIVE) {
|
|
error = bus_deactivate_resource(child, type, rid, res);
|
|
if (error != 0)
|
|
return (error);
|
|
}
|
|
cbb_remove_res(sc, res);
|
|
return (BUS_RELEASE_RESOURCE(device_get_parent(brdev), child,
|
|
type, rid, res));
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* PC Card Power Functions */
|
|
/************************************************************************/
|
|
|
|
static int
|
|
cbb_pcic_power_enable_socket(device_t brdev, device_t child)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
int err;
|
|
|
|
DPRINTF(("cbb_pcic_socket_enable:\n"));
|
|
|
|
/* power down/up the socket to reset */
|
|
err = cbb_do_power(brdev);
|
|
if (err)
|
|
return (err);
|
|
exca_reset(&sc->exca[0], child);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
cbb_pcic_power_disable_socket(device_t brdev, device_t child)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
DPRINTF(("cbb_pcic_socket_disable\n"));
|
|
|
|
/* reset signal asserting... */
|
|
exca_clrb(&sc->exca[0], EXCA_INTR, EXCA_INTR_RESET);
|
|
tsleep(sc, PZERO, "cbbP1", hz / 100);
|
|
|
|
/* power down the socket */
|
|
exca_clrb(&sc->exca[0], EXCA_PWRCTL, EXCA_PWRCTL_OE);
|
|
cbb_power(brdev, CARD_OFF);
|
|
|
|
/* wait 300ms until power fails (Tpf). */
|
|
tsleep(sc, PZERO, "cbbP1", hz * 300 / 1000);
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* POWER methods */
|
|
/************************************************************************/
|
|
|
|
int
|
|
cbb_power_enable_socket(device_t brdev, device_t child)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
if (sc->flags & CBB_16BIT_CARD)
|
|
return (cbb_pcic_power_enable_socket(brdev, child));
|
|
else
|
|
return (cbb_cardbus_power_enable_socket(brdev, child));
|
|
}
|
|
|
|
void
|
|
cbb_power_disable_socket(device_t brdev, device_t child)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
if (sc->flags & CBB_16BIT_CARD)
|
|
cbb_pcic_power_disable_socket(brdev, child);
|
|
else
|
|
cbb_cardbus_power_disable_socket(brdev, child);
|
|
}
|
|
|
|
static int
|
|
cbb_pcic_activate_resource(device_t brdev, device_t child, int type, int rid,
|
|
struct resource *res)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
return (exca_activate_resource(&sc->exca[0], child, type, rid, res));
|
|
}
|
|
|
|
static int
|
|
cbb_pcic_deactivate_resource(device_t brdev, device_t child, int type,
|
|
int rid, struct resource *res)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
return (exca_deactivate_resource(&sc->exca[0], child, type, rid, res));
|
|
}
|
|
|
|
static struct resource *
|
|
cbb_pcic_alloc_resource(device_t brdev, device_t child, int type, int *rid,
|
|
u_long start, u_long end, u_long count, u_int flags)
|
|
{
|
|
struct resource *res = NULL;
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
int align;
|
|
int tmp;
|
|
|
|
switch (type) {
|
|
case SYS_RES_MEMORY:
|
|
if (start < cbb_start_mem)
|
|
start = cbb_start_mem;
|
|
if (end < start)
|
|
end = start;
|
|
if (count < CBB_MEMALIGN)
|
|
align = CBB_MEMALIGN;
|
|
else
|
|
align = count;
|
|
if (align > (1 << RF_ALIGNMENT(flags)))
|
|
flags = (flags & ~RF_ALIGNMENT_MASK) |
|
|
rman_make_alignment_flags(align);
|
|
break;
|
|
case SYS_RES_IOPORT:
|
|
if (start < cbb_start_16_io)
|
|
start = cbb_start_16_io;
|
|
if (end < start)
|
|
end = start;
|
|
break;
|
|
case SYS_RES_IRQ:
|
|
tmp = rman_get_start(sc->irq_res);
|
|
if (start > tmp || end < tmp || count != 1) {
|
|
device_printf(child, "requested interrupt %ld-%ld,"
|
|
"count = %ld not supported by cbb\n",
|
|
start, end, count);
|
|
return (NULL);
|
|
}
|
|
flags |= RF_SHAREABLE;
|
|
start = end = rman_get_start(sc->irq_res);
|
|
break;
|
|
}
|
|
res = BUS_ALLOC_RESOURCE(device_get_parent(brdev), child, type, rid,
|
|
start, end, count, flags & ~RF_ACTIVE);
|
|
if (res == NULL)
|
|
return (NULL);
|
|
cbb_insert_res(sc, res, type, *rid);
|
|
if (flags & RF_ACTIVE) {
|
|
if (bus_activate_resource(child, type, *rid, res) != 0) {
|
|
bus_release_resource(child, type, *rid, res);
|
|
return (NULL);
|
|
}
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
|
|
static int
|
|
cbb_pcic_release_resource(device_t brdev, device_t child, int type,
|
|
int rid, struct resource *res)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
int error;
|
|
|
|
if (rman_get_flags(res) & RF_ACTIVE) {
|
|
error = bus_deactivate_resource(child, type, rid, res);
|
|
if (error != 0)
|
|
return (error);
|
|
}
|
|
cbb_remove_res(sc, res);
|
|
return (BUS_RELEASE_RESOURCE(device_get_parent(brdev), child,
|
|
type, rid, res));
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* PC Card methods */
|
|
/************************************************************************/
|
|
|
|
int
|
|
cbb_pcic_set_res_flags(device_t brdev, device_t child, int type, int rid,
|
|
uint32_t flags)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
struct resource *res;
|
|
|
|
if (type != SYS_RES_MEMORY)
|
|
return (EINVAL);
|
|
res = cbb_find_res(sc, type, rid);
|
|
if (res == NULL) {
|
|
device_printf(brdev,
|
|
"set_res_flags: specified rid not found\n");
|
|
return (ENOENT);
|
|
}
|
|
return (exca_mem_set_flags(&sc->exca[0], res, flags));
|
|
}
|
|
|
|
int
|
|
cbb_pcic_set_memory_offset(device_t brdev, device_t child, int rid,
|
|
uint32_t cardaddr, uint32_t *deltap)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
struct resource *res;
|
|
|
|
res = cbb_find_res(sc, SYS_RES_MEMORY, rid);
|
|
if (res == NULL) {
|
|
device_printf(brdev,
|
|
"set_memory_offset: specified rid not found\n");
|
|
return (ENOENT);
|
|
}
|
|
return (exca_mem_set_offset(&sc->exca[0], res, cardaddr, deltap));
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* BUS Methods */
|
|
/************************************************************************/
|
|
|
|
|
|
int
|
|
cbb_activate_resource(device_t brdev, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
if (sc->flags & CBB_16BIT_CARD)
|
|
return (cbb_pcic_activate_resource(brdev, child, type, rid, r));
|
|
else
|
|
return (cbb_cardbus_activate_resource(brdev, child, type, rid,
|
|
r));
|
|
}
|
|
|
|
int
|
|
cbb_deactivate_resource(device_t brdev, device_t child, int type,
|
|
int rid, struct resource *r)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
if (sc->flags & CBB_16BIT_CARD)
|
|
return (cbb_pcic_deactivate_resource(brdev, child, type,
|
|
rid, r));
|
|
else
|
|
return (cbb_cardbus_deactivate_resource(brdev, child, type,
|
|
rid, r));
|
|
}
|
|
|
|
struct resource *
|
|
cbb_alloc_resource(device_t brdev, device_t child, int type, int *rid,
|
|
u_long start, u_long end, u_long count, u_int flags)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
if (sc->flags & CBB_16BIT_CARD)
|
|
return (cbb_pcic_alloc_resource(brdev, child, type, rid,
|
|
start, end, count, flags));
|
|
else
|
|
return (cbb_cardbus_alloc_resource(brdev, child, type, rid,
|
|
start, end, count, flags));
|
|
}
|
|
|
|
int
|
|
cbb_release_resource(device_t brdev, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
if (sc->flags & CBB_16BIT_CARD)
|
|
return (cbb_pcic_release_resource(brdev, child, type,
|
|
rid, r));
|
|
else
|
|
return (cbb_cardbus_release_resource(brdev, child, type,
|
|
rid, r));
|
|
}
|
|
|
|
int
|
|
cbb_read_ivar(device_t brdev, device_t child, int which, uintptr_t *result)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
switch (which) {
|
|
case PCIB_IVAR_BUS:
|
|
*result = sc->secbus;
|
|
return (0);
|
|
}
|
|
return (ENOENT);
|
|
}
|
|
|
|
int
|
|
cbb_write_ivar(device_t brdev, device_t child, int which, uintptr_t value)
|
|
{
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
switch (which) {
|
|
case PCIB_IVAR_BUS:
|
|
sc->secbus = value;
|
|
break;
|
|
}
|
|
return (ENOENT);
|
|
}
|
|
|
|
/************************************************************************/
|
|
/* PCI compat methods */
|
|
/************************************************************************/
|
|
|
|
int
|
|
cbb_maxslots(device_t brdev)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
uint32_t
|
|
cbb_read_config(device_t brdev, int b, int s, int f, int reg, int width)
|
|
{
|
|
uint32_t rv;
|
|
|
|
/*
|
|
* Pass through to the next ppb up the chain (i.e. our grandparent).
|
|
*/
|
|
rv = PCIB_READ_CONFIG(device_get_parent(device_get_parent(brdev)),
|
|
b, s, f, reg, width);
|
|
return (rv);
|
|
}
|
|
|
|
void
|
|
cbb_write_config(device_t brdev, int b, int s, int f, int reg, uint32_t val,
|
|
int width)
|
|
{
|
|
/*
|
|
* Pass through to the next ppb up the chain (i.e. our grandparent).
|
|
*/
|
|
PCIB_WRITE_CONFIG(device_get_parent(device_get_parent(brdev)),
|
|
b, s, f, reg, val, width);
|
|
}
|
|
|
|
int
|
|
cbb_suspend(device_t self)
|
|
{
|
|
int error = 0;
|
|
struct cbb_softc *sc = device_get_softc(self);
|
|
|
|
cbb_set(sc, CBB_SOCKET_MASK, 0); /* Quiet hardware */
|
|
bus_teardown_intr(self, sc->irq_res, sc->intrhand);
|
|
sc->flags &= ~CBB_CARD_OK; /* Card is bogus now */
|
|
error = bus_generic_suspend(self);
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
cbb_resume(device_t self)
|
|
{
|
|
int error = 0;
|
|
struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(self);
|
|
uint32_t tmp;
|
|
|
|
/*
|
|
* Some BIOSes will not save the BARs for the pci chips, so we
|
|
* must do it ourselves. If the BAR is reset to 0 for an I/O
|
|
* device, it will read back as 0x1, so no explicit test for
|
|
* memory devices are needed.
|
|
*
|
|
* Note: The PCI bus code should do this automatically for us on
|
|
* suspend/resume, but until it does, we have to cope.
|
|
*/
|
|
pci_write_config(self, CBBR_SOCKBASE, rman_get_start(sc->base_res), 4);
|
|
DEVPRINTF((self, "PCI Memory allocated: %08lx\n",
|
|
rman_get_start(sc->base_res)));
|
|
|
|
sc->chipinit(sc);
|
|
|
|
/* reset interrupt -- Do we really need to do this? */
|
|
tmp = cbb_get(sc, CBB_SOCKET_EVENT);
|
|
cbb_set(sc, CBB_SOCKET_EVENT, tmp);
|
|
|
|
/* re-establish the interrupt. */
|
|
if (bus_setup_intr(self, sc->irq_res, INTR_TYPE_AV | INTR_MPSAFE,
|
|
cbb_intr, sc, &sc->intrhand)) {
|
|
device_printf(self, "couldn't re-establish interrupt");
|
|
bus_release_resource(self, SYS_RES_IRQ, 0, sc->irq_res);
|
|
bus_release_resource(self, SYS_RES_MEMORY, CBBR_SOCKBASE,
|
|
sc->base_res);
|
|
sc->irq_res = NULL;
|
|
sc->base_res = NULL;
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/* CSC Interrupt: Card detect interrupt on */
|
|
cbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD);
|
|
|
|
/* Signal the thread to wakeup. */
|
|
mtx_lock(&sc->mtx);
|
|
cv_signal(&sc->cv);
|
|
mtx_unlock(&sc->mtx);
|
|
|
|
error = bus_generic_resume(self);
|
|
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
cbb_child_present(device_t self)
|
|
{
|
|
struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(self);
|
|
uint32_t sockstate;
|
|
|
|
sockstate = cbb_get(sc, CBB_SOCKET_STATE);
|
|
return (CBB_CARD_PRESENT(sockstate) &&
|
|
(sc->flags & CBB_CARD_OK) == CBB_CARD_OK);
|
|
}
|