freebsd-dev/contrib/perl5/config_h.SH
2002-03-16 20:14:30 +00:00

3239 lines
99 KiB
Bash
Executable File

case $CONFIG in
'')
if test -f config.sh; then TOP=.;
elif test -f ../config.sh; then TOP=..;
elif test -f ../../config.sh; then TOP=../..;
elif test -f ../../../config.sh; then TOP=../../..;
elif test -f ../../../../config.sh; then TOP=../../../..;
else
echo "Can't find config.sh."; exit 1
fi
. $TOP/config.sh
;;
esac
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
echo "Extracting config.h (with variable substitutions)"
sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!'
/*
* This file was produced by running the config_h.SH script, which
* gets its values from config.sh, which is generally produced by
* running Configure.
*
* Feel free to modify any of this as the need arises. Note, however,
* that running config_h.SH again will wipe out any changes you've made.
* For a more permanent change edit config.sh and rerun config_h.SH.
*
* \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
*/
/*
* Package name : $package
* Source directory : $src
* Configuration time: $cf_time
* Configured by : $cf_by
* Target system : $myuname
*/
#ifndef _config_h_
#define _config_h_
/* LOC_SED:
* This symbol holds the complete pathname to the sed program.
*/
#define LOC_SED "$full_sed" /**/
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
* available.
*/
#$d_alarm HAS_ALARM /**/
/* HASATTRIBUTE:
* This symbol indicates the C compiler can check for function attributes,
* such as printf formats. This is normally only supported by GNU cc.
*/
#$d_attribut HASATTRIBUTE /**/
#ifndef HASATTRIBUTE
#define __attribute__(_arg_)
#endif
/* HAS_BCMP:
* This symbol is defined if the bcmp() routine is available to
* compare blocks of memory.
*/
#$d_bcmp HAS_BCMP /**/
/* HAS_BCOPY:
* This symbol is defined if the bcopy() routine is available to
* copy blocks of memory.
*/
#$d_bcopy HAS_BCOPY /**/
/* HAS_BZERO:
* This symbol is defined if the bzero() routine is available to
* set a memory block to 0.
*/
#$d_bzero HAS_BZERO /**/
/* HAS_CHOWN:
* This symbol, if defined, indicates that the chown routine is
* available.
*/
#$d_chown HAS_CHOWN /**/
/* HAS_CHROOT:
* This symbol, if defined, indicates that the chroot routine is
* available.
*/
#$d_chroot HAS_CHROOT /**/
/* HAS_CHSIZE:
* This symbol, if defined, indicates that the chsize routine is available
* to truncate files. You might need a -lx to get this routine.
*/
#$d_chsize HAS_CHSIZE /**/
/* HASCONST:
* This symbol, if defined, indicates that this C compiler knows about
* the const type. There is no need to actually test for that symbol
* within your programs. The mere use of the "const" keyword will
* trigger the necessary tests.
*/
#$d_const HASCONST /**/
#ifndef HASCONST
#define const
#endif
/* HAS_CRYPT:
* This symbol, if defined, indicates that the crypt routine is available
* to encrypt passwords and the like.
*/
#$d_crypt HAS_CRYPT /**/
/* HAS_CUSERID:
* This symbol, if defined, indicates that the cuserid routine is
* available to get character login names.
*/
#$d_cuserid HAS_CUSERID /**/
/* HAS_DBL_DIG:
* This symbol, if defined, indicates that this system's <float.h>
* or <limits.h> defines the symbol DBL_DIG, which is the number
* of significant digits in a double precision number. If this
* symbol is not defined, a guess of 15 is usually pretty good.
*/
#$d_dbl_dig HAS_DBL_DIG /* */
/* HAS_DIFFTIME:
* This symbol, if defined, indicates that the difftime routine is
* available.
*/
#$d_difftime HAS_DIFFTIME /**/
/* HAS_DLERROR:
* This symbol, if defined, indicates that the dlerror routine is
* available to return a string describing the last error that
* occurred from a call to dlopen(), dlclose() or dlsym().
*/
#$d_dlerror HAS_DLERROR /**/
/* SETUID_SCRIPTS_ARE_SECURE_NOW:
* This symbol, if defined, indicates that the bug that prevents
* setuid scripts from being secure is not present in this kernel.
*/
/* DOSUID:
* This symbol, if defined, indicates that the C program should
* check the script that it is executing for setuid/setgid bits, and
* attempt to emulate setuid/setgid on systems that have disabled
* setuid #! scripts because the kernel can't do it securely.
* It is up to the package designer to make sure that this emulation
* is done securely. Among other things, it should do an fstat on
* the script it just opened to make sure it really is a setuid/setgid
* script, it should make sure the arguments passed correspond exactly
* to the argument on the #! line, and it should not trust any
* subprocesses to which it must pass the filename rather than the
* file descriptor of the script to be executed.
*/
#$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/
#$d_dosuid DOSUID /**/
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* available to duplicate file descriptors.
*/
#$d_dup2 HAS_DUP2 /**/
/* HAS_FCHMOD:
* This symbol, if defined, indicates that the fchmod routine is available
* to change mode of opened files. If unavailable, use chmod().
*/
#$d_fchmod HAS_FCHMOD /**/
/* HAS_FCHOWN:
* This symbol, if defined, indicates that the fchown routine is available
* to change ownership of opened files. If unavailable, use chown().
*/
#$d_fchown HAS_FCHOWN /**/
/* HAS_FCNTL:
* This symbol, if defined, indicates to the C program that
* the fcntl() function exists.
*/
#$d_fcntl HAS_FCNTL /**/
/* HAS_FGETPOS:
* This symbol, if defined, indicates that the fgetpos routine is
* available to get the file position indicator, similar to ftell().
*/
#$d_fgetpos HAS_FGETPOS /**/
/* HAS_FLOCK:
* This symbol, if defined, indicates that the flock routine is
* available to do file locking.
*/
#$d_flock HAS_FLOCK /**/
/* HAS_FORK:
* This symbol, if defined, indicates that the fork routine is
* available.
*/
#$d_fork HAS_FORK /**/
/* HAS_FSETPOS:
* This symbol, if defined, indicates that the fsetpos routine is
* available to set the file position indicator, similar to fseek().
*/
#$d_fsetpos HAS_FSETPOS /**/
/* HAS_GETTIMEOFDAY:
* This symbol, if defined, indicates that the gettimeofday() system
* call is available for a sub-second accuracy clock. Usually, the file
* <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
* The type "Timeval" should be used to refer to "struct timeval".
*/
#$d_gettimeod HAS_GETTIMEOFDAY /**/
#ifdef HAS_GETTIMEOFDAY
#define Timeval struct timeval /* Structure used by gettimeofday() */
#endif
/* HAS_GETGROUPS:
* This symbol, if defined, indicates that the getgroups() routine is
* available to get the list of process groups. If unavailable, multiple
* groups are probably not supported.
*/
#$d_getgrps HAS_GETGROUPS /**/
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
* available to get the login name.
*/
#$d_getlogin HAS_GETLOGIN /**/
/* HAS_GETPGID:
* This symbol, if defined, indicates to the C program that
* the getpgid(pid) function is available to get the
* process group id.
*/
#$d_getpgid HAS_GETPGID /**/
/* HAS_GETPGRP2:
* This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
* routine is available to get the current process group.
*/
#$d_getpgrp2 HAS_GETPGRP2 /**/
/* HAS_GETPPID:
* This symbol, if defined, indicates that the getppid routine is
* available to get the parent process ID.
*/
#$d_getppid HAS_GETPPID /**/
/* HAS_GETPRIORITY:
* This symbol, if defined, indicates that the getpriority routine is
* available to get a process's priority.
*/
#$d_getprior HAS_GETPRIORITY /**/
/* HAS_INET_ATON:
* This symbol, if defined, indicates to the C program that the
* inet_aton() function is available to parse IP address "dotted-quad"
* strings.
*/
#$d_inetaton HAS_INET_ATON /**/
/* HAS_KILLPG:
* This symbol, if defined, indicates that the killpg routine is available
* to kill process groups. If unavailable, you probably should use kill
* with a negative process number.
*/
#$d_killpg HAS_KILLPG /**/
/* HAS_LINK:
* This symbol, if defined, indicates that the link routine is
* available to create hard links.
*/
#$d_link HAS_LINK /**/
/* HAS_LOCALECONV:
* This symbol, if defined, indicates that the localeconv routine is
* available for numeric and monetary formatting conventions.
*/
#$d_locconv HAS_LOCALECONV /**/
/* HAS_LOCKF:
* This symbol, if defined, indicates that the lockf routine is
* available to do file locking.
*/
#$d_lockf HAS_LOCKF /**/
/* HAS_LSTAT:
* This symbol, if defined, indicates that the lstat routine is
* available to do file stats on symbolic links.
*/
#$d_lstat HAS_LSTAT /**/
/* HAS_MBLEN:
* This symbol, if defined, indicates that the mblen routine is available
* to find the number of bytes in a multibye character.
*/
#$d_mblen HAS_MBLEN /**/
/* HAS_MBSTOWCS:
* This symbol, if defined, indicates that the mbstowcs routine is
* available to covert a multibyte string into a wide character string.
*/
#$d_mbstowcs HAS_MBSTOWCS /**/
/* HAS_MBTOWC:
* This symbol, if defined, indicates that the mbtowc routine is available
* to covert a multibyte to a wide character.
*/
#$d_mbtowc HAS_MBTOWC /**/
/* HAS_MEMCMP:
* This symbol, if defined, indicates that the memcmp routine is available
* to compare blocks of memory.
*/
#$d_memcmp HAS_MEMCMP /**/
/* HAS_MEMCPY:
* This symbol, if defined, indicates that the memcpy routine is available
* to copy blocks of memory.
*/
#$d_memcpy HAS_MEMCPY /**/
/* HAS_MEMMOVE:
* This symbol, if defined, indicates that the memmove routine is available
* to copy potentially overlapping blocks of memory. This should be used
* only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
* own version.
*/
#$d_memmove HAS_MEMMOVE /**/
/* HAS_MEMSET:
* This symbol, if defined, indicates that the memset routine is available
* to set blocks of memory.
*/
#$d_memset HAS_MEMSET /**/
/* HAS_MKDIR:
* This symbol, if defined, indicates that the mkdir routine is available
* to create directories. Otherwise you should fork off a new process to
* exec /bin/mkdir.
*/
#$d_mkdir HAS_MKDIR /**/
/* HAS_MKFIFO:
* This symbol, if defined, indicates that the mkfifo routine is
* available to create FIFOs. Otherwise, mknod should be able to
* do it for you. However, if mkfifo is there, mknod might require
* super-user privileges which mkfifo will not.
*/
#$d_mkfifo HAS_MKFIFO /**/
/* HAS_MKTIME:
* This symbol, if defined, indicates that the mktime routine is
* available.
*/
#$d_mktime HAS_MKTIME /**/
/* HAS_MSYNC:
* This symbol, if defined, indicates that the msync system call is
* available to synchronize a mapped file.
*/
#$d_msync HAS_MSYNC /**/
/* HAS_MUNMAP:
* This symbol, if defined, indicates that the munmap system call is
* available to unmap a region, usually mapped by mmap().
*/
#$d_munmap HAS_MUNMAP /**/
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
* available.
*/
#$d_nice HAS_NICE /**/
/* HAS_PATHCONF:
* This symbol, if defined, indicates that pathconf() is available
* to determine file-system related limits and options associated
* with a given filename.
*/
/* HAS_FPATHCONF:
* This symbol, if defined, indicates that pathconf() is available
* to determine file-system related limits and options associated
* with a given open file descriptor.
*/
#$d_pathconf HAS_PATHCONF /**/
#$d_fpathconf HAS_FPATHCONF /**/
/* HAS_PAUSE:
* This symbol, if defined, indicates that the pause routine is
* available to suspend a process until a signal is received.
*/
#$d_pause HAS_PAUSE /**/
/* HAS_PIPE:
* This symbol, if defined, indicates that the pipe routine is
* available to create an inter-process channel.
*/
#$d_pipe HAS_PIPE /**/
/* HAS_POLL:
* This symbol, if defined, indicates that the poll routine is
* available to poll active file descriptors. You may safely
* include <poll.h> when this symbol is defined.
*/
#$d_poll HAS_POLL /**/
/* HAS_READDIR:
* This symbol, if defined, indicates that the readdir routine is
* available to read directory entries. You may have to include
* <dirent.h>. See I_DIRENT.
*/
#$d_readdir HAS_READDIR /**/
/* HAS_SEEKDIR:
* This symbol, if defined, indicates that the seekdir routine is
* available. You may have to include <dirent.h>. See I_DIRENT.
*/
#$d_seekdir HAS_SEEKDIR /**/
/* HAS_TELLDIR:
* This symbol, if defined, indicates that the telldir routine is
* available. You may have to include <dirent.h>. See I_DIRENT.
*/
#$d_telldir HAS_TELLDIR /**/
/* HAS_REWINDDIR:
* This symbol, if defined, indicates that the rewinddir routine is
* available. You may have to include <dirent.h>. See I_DIRENT.
*/
#$d_rewinddir HAS_REWINDDIR /**/
/* HAS_READLINK:
* This symbol, if defined, indicates that the readlink routine is
* available to read the value of a symbolic link.
*/
#$d_readlink HAS_READLINK /**/
/* HAS_RENAME:
* This symbol, if defined, indicates that the rename routine is available
* to rename files. Otherwise you should do the unlink(), link(), unlink()
* trick.
*/
#$d_rename HAS_RENAME /**/
/* HAS_RMDIR:
* This symbol, if defined, indicates that the rmdir routine is
* available to remove directories. Otherwise you should fork off a
* new process to exec /bin/rmdir.
*/
#$d_rmdir HAS_RMDIR /**/
/* HAS_SELECT:
* This symbol, if defined, indicates that the select routine is
* available to select active file descriptors. If the timeout field
* is used, <sys/time.h> may need to be included.
*/
#$d_select HAS_SELECT /**/
/* HAS_SETEGID:
* This symbol, if defined, indicates that the setegid routine is available
* to change the effective gid of the current program.
*/
#$d_setegid HAS_SETEGID /**/
/* HAS_SETEUID:
* This symbol, if defined, indicates that the seteuid routine is available
* to change the effective uid of the current program.
*/
#$d_seteuid HAS_SETEUID /**/
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
* to a line-buffered mode.
*/
#$d_setlinebuf HAS_SETLINEBUF /**/
/* HAS_SETLOCALE:
* This symbol, if defined, indicates that the setlocale routine is
* available to handle locale-specific ctype implementations.
*/
#$d_setlocale HAS_SETLOCALE /**/
/* HAS_SETPGID:
* This symbol, if defined, indicates that the setpgid(pid, gpid)
* routine is available to set process group ID.
*/
#$d_setpgid HAS_SETPGID /**/
/* HAS_SETPGRP2:
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* routine is available to set the current process group.
*/
#$d_setpgrp2 HAS_SETPGRP2 /**/
/* HAS_SETPRIORITY:
* This symbol, if defined, indicates that the setpriority routine is
* available to set a process's priority.
*/
#$d_setprior HAS_SETPRIORITY /**/
/* HAS_SETREGID:
* This symbol, if defined, indicates that the setregid routine is
* available to change the real and effective gid of the current
* process.
*/
/* HAS_SETRESGID:
* This symbol, if defined, indicates that the setresgid routine is
* available to change the real, effective and saved gid of the current
* process.
*/
#$d_setregid HAS_SETREGID /**/
#$d_setresgid HAS_SETRESGID /**/
/* HAS_SETREUID:
* This symbol, if defined, indicates that the setreuid routine is
* available to change the real and effective uid of the current
* process.
*/
/* HAS_SETRESUID:
* This symbol, if defined, indicates that the setresuid routine is
* available to change the real, effective and saved uid of the current
* process.
*/
#$d_setreuid HAS_SETREUID /**/
#$d_setresuid HAS_SETRESUID /**/
/* HAS_SETRGID:
* This symbol, if defined, indicates that the setrgid routine is available
* to change the real gid of the current program.
*/
#$d_setrgid HAS_SETRGID /**/
/* HAS_SETRUID:
* This symbol, if defined, indicates that the setruid routine is available
* to change the real uid of the current program.
*/
#$d_setruid HAS_SETRUID /**/
/* HAS_SETSID:
* This symbol, if defined, indicates that the setsid routine is
* available to set the process group ID.
*/
#$d_setsid HAS_SETSID /**/
/* Shmat_t:
* This symbol holds the return type of the shmat() system call.
* Usually set to 'void *' or 'char *'.
*/
/* HAS_SHMAT_PROTOTYPE:
* This symbol, if defined, indicates that the sys/shm.h includes
* a prototype for shmat(). Otherwise, it is up to the program to
* guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
* but not always right so it should be emitted by the program only
* when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
#define Shmat_t $shmattype /**/
#$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/
/* HAS_STRCHR:
* This symbol is defined to indicate that the strchr()/strrchr()
* functions are available for string searching. If not, try the
* index()/rindex() pair.
*/
/* HAS_INDEX:
* This symbol is defined to indicate that the index()/rindex()
* functions are available for string searching.
*/
#$d_strchr HAS_STRCHR /**/
#$d_index HAS_INDEX /**/
/* HAS_STRCOLL:
* This symbol, if defined, indicates that the strcoll routine is
* available to compare strings using collating information.
*/
#$d_strcoll HAS_STRCOLL /**/
/* USE_STRUCT_COPY:
* This symbol, if defined, indicates that this C compiler knows how
* to copy structures. If undefined, you'll need to use a block copy
* routine of some sort instead.
*/
#$d_strctcpy USE_STRUCT_COPY /**/
/* HAS_STRTOD:
* This symbol, if defined, indicates that the strtod routine is
* available to provide better numeric string conversion than atof().
*/
#$d_strtod HAS_STRTOD /**/
/* HAS_STRTOL:
* This symbol, if defined, indicates that the strtol routine is available
* to provide better numeric string conversion than atoi() and friends.
*/
#$d_strtol HAS_STRTOL /**/
/* HAS_STRTOUL:
* This symbol, if defined, indicates that the strtoul routine is
* available to provide conversion of strings to unsigned long.
*/
#$d_strtoul HAS_STRTOUL /**/
/* HAS_STRXFRM:
* This symbol, if defined, indicates that the strxfrm() routine is
* available to transform strings.
*/
#$d_strxfrm HAS_STRXFRM /**/
/* HAS_SYMLINK:
* This symbol, if defined, indicates that the symlink routine is available
* to create symbolic links.
*/
#$d_symlink HAS_SYMLINK /**/
/* HAS_SYSCALL:
* This symbol, if defined, indicates that the syscall routine is
* available to call arbitrary system calls. If undefined, that's tough.
*/
#$d_syscall HAS_SYSCALL /**/
/* HAS_SYSCONF:
* This symbol, if defined, indicates that sysconf() is available
* to determine system related limits and options.
*/
#$d_sysconf HAS_SYSCONF /**/
/* HAS_SYSTEM:
* This symbol, if defined, indicates that the system routine is
* available to issue a shell command.
*/
#$d_system HAS_SYSTEM /**/
/* HAS_TCGETPGRP:
* This symbol, if defined, indicates that the tcgetpgrp routine is
* available to get foreground process group ID.
*/
#$d_tcgetpgrp HAS_TCGETPGRP /**/
/* HAS_TCSETPGRP:
* This symbol, if defined, indicates that the tcsetpgrp routine is
* available to set foreground process group ID.
*/
#$d_tcsetpgrp HAS_TCSETPGRP /**/
/* HAS_TRUNCATE:
* This symbol, if defined, indicates that the truncate routine is
* available to truncate files.
*/
#$d_truncate HAS_TRUNCATE /**/
/* HAS_TZNAME:
* This symbol, if defined, indicates that the tzname[] array is
* available to access timezone names.
*/
#$d_tzname HAS_TZNAME /**/
/* HAS_UMASK:
* This symbol, if defined, indicates that the umask routine is
* available to set and get the value of the file creation mask.
*/
#$d_umask HAS_UMASK /**/
/* HASVOLATILE:
* This symbol, if defined, indicates that this C compiler knows about
* the volatile declaration.
*/
#$d_volatile HASVOLATILE /**/
#ifndef HASVOLATILE
#define volatile
#endif
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
#$d_wait4 HAS_WAIT4 /**/
/* HAS_WAITPID:
* This symbol, if defined, indicates that the waitpid routine is
* available to wait for child process.
*/
#$d_waitpid HAS_WAITPID /**/
/* HAS_WCSTOMBS:
* This symbol, if defined, indicates that the wcstombs routine is
* available to convert wide character strings to multibyte strings.
*/
#$d_wcstombs HAS_WCSTOMBS /**/
/* HAS_WCTOMB:
* This symbol, if defined, indicates that the wctomb routine is available
* to covert a wide character to a multibyte.
*/
#$d_wctomb HAS_WCTOMB /**/
/* I_ARPA_INET:
* This symbol, if defined, indicates to the C program that it should
* include <arpa/inet.h> to get inet_addr and friends declarations.
*/
#$i_arpainet I_ARPA_INET /**/
/* I_DBM:
* This symbol, if defined, indicates that <dbm.h> exists and should
* be included.
*/
/* I_RPCSVC_DBM:
* This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
* should be included.
*/
#$i_dbm I_DBM /**/
#$i_rpcsvcdbm I_RPCSVC_DBM /**/
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* include <dirent.h>. Using this symbol also triggers the definition
* of the Direntry_t define which ends up being 'struct dirent' or
* 'struct direct' depending on the availability of <dirent.h>.
*/
/* DIRNAMLEN:
* This symbol, if defined, indicates to the C program that the length
* of directory entry names is provided by a d_namlen field. Otherwise
* you need to do strlen() on the d_name field.
*/
/* Direntry_t:
* This symbol is set to 'struct direct' or 'struct dirent' depending on
* whether dirent is available or not. You should use this pseudo type to
* portably declare your directory entries.
*/
#$i_dirent I_DIRENT /**/
#$d_dirnamlen DIRNAMLEN /**/
#define Direntry_t $direntrytype
/* I_DLFCN:
* This symbol, if defined, indicates that <dlfcn.h> exists and should
* be included.
*/
#$i_dlfcn I_DLFCN /**/
/* I_FCNTL:
* This manifest constant tells the C program to include <fcntl.h>.
*/
#$i_fcntl I_FCNTL /**/
/* I_FLOAT:
* This symbol, if defined, indicates to the C program that it should
* include <float.h> to get definition of symbols like DBL_MAX or
* DBL_MIN, i.e. machine dependent floating point values.
*/
#$i_float I_FLOAT /**/
/* I_LIMITS:
* This symbol, if defined, indicates to the C program that it should
* include <limits.h> to get definition of symbols like WORD_BIT or
* LONG_MAX, i.e. machine dependant limitations.
*/
#$i_limits I_LIMITS /**/
/* I_LOCALE:
* This symbol, if defined, indicates to the C program that it should
* include <locale.h>.
*/
#$i_locale I_LOCALE /**/
/* I_MATH:
* This symbol, if defined, indicates to the C program that it should
* include <math.h>.
*/
#$i_math I_MATH /**/
/* I_MEMORY:
* This symbol, if defined, indicates to the C program that it should
* include <memory.h>.
*/
#$i_memory I_MEMORY /**/
/* I_NDBM:
* This symbol, if defined, indicates that <ndbm.h> exists and should
* be included.
*/
#$i_ndbm I_NDBM /**/
/* I_NET_ERRNO:
* This symbol, if defined, indicates that <net/errno.h> exists and
* should be included.
*/
#$i_neterrno I_NET_ERRNO /**/
/* I_NETINET_IN:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
*/
#$i_niin I_NETINET_IN /**/
/* I_SFIO:
* This symbol, if defined, indicates to the C program that it should
* include <sfio.h>.
*/
#$i_sfio I_SFIO /**/
/* I_STDDEF:
* This symbol, if defined, indicates that <stddef.h> exists and should
* be included.
*/
#$i_stddef I_STDDEF /**/
/* I_STDLIB:
* This symbol, if defined, indicates that <stdlib.h> exists and should
* be included.
*/
#$i_stdlib I_STDLIB /**/
/* I_STRING:
* This symbol, if defined, indicates to the C program that it should
* include <string.h> (USG systems) instead of <strings.h> (BSD systems).
*/
#$i_string I_STRING /**/
/* I_SYS_DIR:
* This symbol, if defined, indicates to the C program that it should
* include <sys/dir.h>.
*/
#$i_sysdir I_SYS_DIR /**/
/* I_SYS_FILE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/file.h> to get definition of R_OK and friends.
*/
#$i_sysfile I_SYS_FILE /**/
/* I_SYS_IOCTL:
* This symbol, if defined, indicates that <sys/ioctl.h> exists and should
* be included. Otherwise, include <sgtty.h> or <termio.h>.
*/
#$i_sysioctl I_SYS_IOCTL /**/
/* I_SYS_NDIR:
* This symbol, if defined, indicates to the C program that it should
* include <sys/ndir.h>.
*/
#$i_sysndir I_SYS_NDIR /**/
/* I_SYS_PARAM:
* This symbol, if defined, indicates to the C program that it should
* include <sys/param.h>.
*/
#$i_sysparam I_SYS_PARAM /**/
/* I_SYS_RESOURCE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/resource.h>.
*/
#$i_sysresrc I_SYS_RESOURCE /**/
/* I_SYS_SELECT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/select.h> in order to get definition of struct timeval.
*/
#$i_sysselct I_SYS_SELECT /**/
/* I_SYS_STAT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/stat.h>.
*/
#$i_sysstat I_SYS_STAT /**/
/* I_SYS_TIMES:
* This symbol, if defined, indicates to the C program that it should
* include <sys/times.h>.
*/
#$i_systimes I_SYS_TIMES /**/
/* I_SYS_TYPES:
* This symbol, if defined, indicates to the C program that it should
* include <sys/types.h>.
*/
#$i_systypes I_SYS_TYPES /**/
/* I_SYS_UN:
* This symbol, if defined, indicates to the C program that it should
* include <sys/un.h> to get UNIX domain socket definitions.
*/
#$i_sysun I_SYS_UN /**/
/* I_SYS_WAIT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/wait.h>.
*/
#$i_syswait I_SYS_WAIT /**/
/* I_TERMIO:
* This symbol, if defined, indicates that the program should include
* <termio.h> rather than <sgtty.h>. There are also differences in
* the ioctl() calls that depend on the value of this symbol.
*/
/* I_TERMIOS:
* This symbol, if defined, indicates that the program should include
* the POSIX termios.h rather than sgtty.h or termio.h.
* There are also differences in the ioctl() calls that depend on the
* value of this symbol.
*/
/* I_SGTTY:
* This symbol, if defined, indicates that the program should include
* <sgtty.h> rather than <termio.h>. There are also differences in
* the ioctl() calls that depend on the value of this symbol.
*/
#$i_termio I_TERMIO /**/
#$i_termios I_TERMIOS /**/
#$i_sgtty I_SGTTY /**/
/* I_UNISTD:
* This symbol, if defined, indicates to the C program that it should
* include <unistd.h>.
*/
#$i_unistd I_UNISTD /**/
/* I_UTIME:
* This symbol, if defined, indicates to the C program that it should
* include <utime.h>.
*/
#$i_utime I_UTIME /**/
/* I_VALUES:
* This symbol, if defined, indicates to the C program that it should
* include <values.h> to get definition of symbols like MINFLOAT or
* MAXLONG, i.e. machine dependant limitations. Probably, you
* should use <limits.h> instead, if it is available.
*/
#$i_values I_VALUES /**/
/* I_STDARG:
* This symbol, if defined, indicates that <stdarg.h> exists and should
* be included.
*/
/* I_VARARGS:
* This symbol, if defined, indicates to the C program that it should
* include <varargs.h>.
*/
#$i_stdarg I_STDARG /**/
#$i_varargs I_VARARGS /**/
/* I_VFORK:
* This symbol, if defined, indicates to the C program that it should
* include vfork.h.
*/
#$i_vfork I_VFORK /**/
/* CAN_PROTOTYPE:
* If defined, this macro indicates that the C compiler can handle
* function prototypes.
*/
/* _:
* This macro is used to declare function parameters for folks who want
* to make declarations with prototypes using a different style than
* the above macros. Use double parentheses. For example:
*
* int main _((int argc, char *argv[]));
*/
#$prototype CAN_PROTOTYPE /**/
#ifdef CAN_PROTOTYPE
#define _(args) args
#else
#define _(args) ()
#endif
/* SH_PATH:
* This symbol contains the full pathname to the shell used on this
* on this system to execute Bourne shell scripts. Usually, this will be
* /bin/sh, though it's possible that some systems will have /bin/ksh,
* /bin/pdksh, /bin/ash, /bin/bash, or even something such as
* D:/bin/sh.exe.
*/
#define SH_PATH "$sh" /**/
/* CROSSCOMPILE:
* This symbol, if defined, signifies that we our
* build process is a cross-compilation.
*/
#$crosscompile CROSSCOMPILE /**/
/* INTSIZE:
* This symbol contains the value of sizeof(int) so that the C
* preprocessor can make decisions based on it.
*/
/* LONGSIZE:
* This symbol contains the value of sizeof(long) so that the C
* preprocessor can make decisions based on it.
*/
/* SHORTSIZE:
* This symbol contains the value of sizeof(short) so that the C
* preprocessor can make decisions based on it.
*/
#define INTSIZE $intsize /**/
#define LONGSIZE $longsize /**/
#define SHORTSIZE $shortsize /**/
/* MULTIARCH:
* This symbol, if defined, signifies that the build
* process will produce some binary files that are going to be
* used in a cross-platform environment. This is the case for
* example with the NeXT "fat" binaries that contain executables
* for several CPUs.
*/
#$multiarch MULTIARCH /**/
/* HAS_QUAD:
* This symbol, if defined, tells that there's a 64-bit integer type,
* Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
* of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
*/
#$d_quad HAS_QUAD /**/
#ifdef HAS_QUAD
# define Quad_t $quadtype /**/
# define Uquad_t $uquadtype /**/
# define QUADKIND $quadkind /**/
# define QUAD_IS_INT 1
# define QUAD_IS_LONG 2
# define QUAD_IS_LONG_LONG 3
# define QUAD_IS_INT64_T 4
#endif
/* HAS_ACCESSX:
* This symbol, if defined, indicates that the accessx routine is
* available to do extended access checks.
*/
#$d_accessx HAS_ACCESSX /**/
/* HAS_EACCESS:
* This symbol, if defined, indicates that the eaccess routine is
* available to do extended access checks.
*/
#$d_eaccess HAS_EACCESS /**/
/* I_SYS_ACCESS:
* This symbol, if defined, indicates to the C program that it should
* include <sys/access.h>.
*/
#$i_sysaccess I_SYS_ACCESS /**/
/* I_SYS_SECURITY:
* This symbol, if defined, indicates to the C program that it should
* include <sys/security.h>.
*/
#$i_syssecrt I_SYS_SECURITY /**/
/* OSNAME:
* This symbol contains the name of the operating system, as determined
* by Configure. You shouldn't rely on it too much; the specific
* feature tests from Configure are generally more reliable.
*/
#define OSNAME "$osname" /**/
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* double, or a long double when applicable. Usual values are 2,
* 4 and 8. The default is eight, for safety.
*/
#if defined(CROSSCOMPILE) || defined(MULTIARCH)
# define MEM_ALIGNBYTES 8
#else
#define MEM_ALIGNBYTES $alignbytes
#endif
/* ARCHLIB:
* This variable, if defined, holds the name of the directory in
* which the user wants to put architecture-dependent public
* library files for $package. It is most often a local directory
* such as /usr/local/lib. Programs using this variable must be
* prepared to deal with filename expansion. If ARCHLIB is the
* same as PRIVLIB, it is not defined, since presumably the
* program already searches PRIVLIB.
*/
/* ARCHLIB_EXP:
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
#$d_archlib ARCHLIB "$archlib" /**/
#$d_archlib ARCHLIB_EXP "$archlibexp" /**/
/* ARCHNAME:
* This symbol holds a string representing the architecture name.
* It may be used to construct an architecture-dependant pathname
* where library files may be held under a private library, for
* instance.
*/
#define ARCHNAME "$archname" /**/
/* HAS_ATOLF:
* This symbol, if defined, indicates that the atolf routine is
* available to convert strings into long doubles.
*/
#$d_atolf HAS_ATOLF /**/
/* HAS_ATOLL:
* This symbol, if defined, indicates that the atoll routine is
* available to convert strings into long longs.
*/
#$d_atoll HAS_ATOLL /**/
/* BIN:
* This symbol holds the path of the bin directory where the package will
* be installed. Program must be prepared to deal with ~name substitution.
*/
/* BIN_EXP:
* This symbol is the filename expanded version of the BIN symbol, for
* programs that do not want to deal with that at run-time.
*/
#define BIN "$bin" /**/
#define BIN_EXP "$binexp" /**/
/* PERL_BINCOMPAT_5005:
* This symbol, if defined, indicates that this version of Perl should be
* binary-compatible with Perl 5.005. This is impossible for builds
* that use features like threads and multiplicity it is always $undef
* for those versions.
*/
#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* i.e. 0x1234 or 0x4321, etc...
* If the compiler supports cross-compiling or multiple-architecture
* binaries (eg. on NeXT systems), use compiler-defined macros to
* determine the byte order.
* On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
* Binaries (MAB) on either big endian or little endian machines.
* The endian-ness is available at compile-time. This only matters
* for perl, where the config.h can be generated and installed on
* one system, and used by a different architecture to build an
* extension. Older versions of NeXT that might not have
* defined either *_ENDIAN__ were all on Motorola 680x0 series,
* so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
#if defined(CROSSCOMPILE) || defined(MULTIARCH)
# ifdef __LITTLE_ENDIAN__
# if LONGSIZE == 4
# define BYTEORDER 0x1234
# else
# if LONGSIZE == 8
# define BYTEORDER 0x12345678
# endif
# endif
# else
# ifdef __BIG_ENDIAN__
# if LONGSIZE == 4
# define BYTEORDER 0x4321
# else
# if LONGSIZE == 8
# define BYTEORDER 0x87654321
# endif
# endif
# endif
# endif
# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
# define BYTEORDER 0x4321
# endif
#else
#define BYTEORDER 0x$byteorder /* large digits for MSB */
#endif /* NeXT */
/* CAT2:
* This macro catenates 2 tokens together.
*/
/* STRINGIFY:
* This macro surrounds its token with double quotes.
*/
#if $cpp_stuff == 1
#define CAT2(a,b) a/**/b
#define STRINGIFY(a) "a"
/* If you can get stringification with catify, tell me how! */
#endif
#if $cpp_stuff == 42
#define PeRl_CaTiFy(a, b) a ## b
#define PeRl_StGiFy(a) #a
/* the additional level of indirection enables these macros to be
* used as arguments to other macros. See K&R 2nd ed., page 231. */
#define CAT2(a,b) PeRl_CaTiFy(a,b)
#define StGiFy(a) PeRl_StGiFy(a)
#define STRINGIFY(a) PeRl_StGiFy(a)
#endif
#if $cpp_stuff != 1 && $cpp_stuff != 42
# include "Bletch: How does this C preprocessor catenate tokens?"
#endif
/* CPPSTDIN:
* This symbol contains the first part of the string which will invoke
* the C preprocessor on the standard input and produce to standard
* output. Typical value of "cc -E" or "/lib/cpp", but it can also
* call a wrapper. See CPPRUN.
*/
/* CPPMINUS:
* This symbol contains the second part of the string which will invoke
* the C preprocessor on the standard input and produce to standard
* output. This symbol will have the value "-" if CPPSTDIN needs a minus
* to specify standard input, otherwise the value is "".
*/
/* CPPRUN:
* This symbol contains the string which will invoke a C preprocessor on
* the standard input and produce to standard output. It needs to end
* with CPPLAST, after all other preprocessor flags have been specified.
* The main difference with CPPSTDIN is that this program will never be a
* pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
* available directly to the user. Note that it may well be different from
* the preprocessor used to compile the C program.
*/
/* CPPLAST:
* This symbol is intended to be used along with CPPRUN in the same manner
* symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
*/
#define CPPSTDIN "$cppstdin"
#define CPPMINUS "$cppminus"
#define CPPRUN "$cpprun"
#define CPPLAST "$cpplast"
/* HAS_ACCESS:
* This manifest constant lets the C program know that the access()
* system call is available to check for accessibility using real UID/GID.
* (always present on UNIX.)
*/
#$d_access HAS_ACCESS /**/
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
#$d_casti32 CASTI32 /**/
/* CASTNEGFLOAT:
* This symbol is defined if the C compiler can cast negative
* numbers to unsigned longs, ints and shorts.
*/
/* CASTFLAGS:
* This symbol contains flags that say what difficulties the compiler
* has casting odd floating values to unsigned long:
* 0 = ok
* 1 = couldn't cast < 0
* 2 = couldn't cast >= 0x80000000
* 4 = couldn't cast in argument expression list
*/
#$d_castneg CASTNEGFLOAT /**/
#define CASTFLAGS $castflags /**/
/* VOID_CLOSEDIR:
* This symbol, if defined, indicates that the closedir() routine
* does not return a value.
*/
#$d_void_closedir VOID_CLOSEDIR /**/
/* HAS_CSH:
* This symbol, if defined, indicates that the C-shell exists.
*/
/* CSH:
* This symbol, if defined, contains the full pathname of csh.
*/
#$d_csh HAS_CSH /**/
#ifdef HAS_CSH
#define CSH "$full_csh" /**/
#endif
/* DLSYM_NEEDS_UNDERSCORE:
* This symbol, if defined, indicates that we need to prepend an
* underscore to the symbol name before calling dlsym(). This only
* makes sense if you *have* dlsym, which we will presume is the
* case if you're using dl_dlopen.xs.
*/
#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
/* HAS_DRAND48_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the drand48() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern double drand48 _((void));
*/
#$d_drand48proto HAS_DRAND48_PROTO /**/
/* HAS_ENDGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for finalizing sequential access of the group database.
*/
#$d_endgrent HAS_ENDGRENT /**/
/* HAS_ENDHOSTENT:
* This symbol, if defined, indicates that the endhostent() routine is
* available to close whatever was being used for host queries.
*/
#$d_endhent HAS_ENDHOSTENT /**/
/* HAS_ENDNETENT:
* This symbol, if defined, indicates that the endnetent() routine is
* available to close whatever was being used for network queries.
*/
#$d_endnent HAS_ENDNETENT /**/
/* HAS_ENDPROTOENT:
* This symbol, if defined, indicates that the endprotoent() routine is
* available to close whatever was being used for protocol queries.
*/
#$d_endpent HAS_ENDPROTOENT /**/
/* HAS_ENDPWENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for finalizing sequential access of the passwd database.
*/
#$d_endpwent HAS_ENDPWENT /**/
/* HAS_ENDSERVENT:
* This symbol, if defined, indicates that the endservent() routine is
* available to close whatever was being used for service queries.
*/
#$d_endsent HAS_ENDSERVENT /**/
/* HAS_FD_SET:
* This symbol, when defined, indicates presence of the fd_set typedef
* in <sys/types.h>
*/
#$d_fd_set HAS_FD_SET /**/
/* FLEXFILENAMES:
* This symbol, if defined, indicates that the system supports filenames
* longer than 14 characters.
*/
#$d_flexfnam FLEXFILENAMES /**/
/* HAS_FPOS64_T:
* This symbol will be defined if the C compiler supports fpos64_t.
*/
#$d_fpos64_t HAS_FPOS64_T /**/
/* HAS_FREXPL:
* This symbol, if defined, indicates that the frexpl routine is
* available to break a long double floating-point number into
* a normalized fraction and an integral power of 2.
*/
#$d_frexpl HAS_FREXPL /**/
/* HAS_STRUCT_FS_DATA:
* This symbol, if defined, indicates that the struct fs_data
* to do statfs() is supported.
*/
#$d_fs_data_s HAS_STRUCT_FS_DATA /**/
/* HAS_FSEEKO:
* This symbol, if defined, indicates that the fseeko routine is
* available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
#$d_fseeko HAS_FSEEKO /**/
/* HAS_FSTATFS:
* This symbol, if defined, indicates that the fstatfs routine is
* available to stat filesystems by file descriptors.
*/
#$d_fstatfs HAS_FSTATFS /**/
/* HAS_FTELLO:
* This symbol, if defined, indicates that the ftello routine is
* available to ftell beyond 32 bits (useful for ILP32 hosts).
*/
#$d_ftello HAS_FTELLO /**/
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
* emulates the behavior of sprintf("%g"), but is sometimes much more
* efficient. If gconvert() is not available, but gcvt() drops the
* trailing decimal point, then gcvt() is used. If all else fails,
* a macro using sprintf("%g") is used. Arguments for the Gconvert
* macro are: value, number of digits, whether trailing zeros should
* be retained, and the output buffer.
* Possible values are:
* d_Gconvert='gconvert((x),(n),(t),(b))'
* d_Gconvert='gcvt((x),(n),(b))'
* d_Gconvert='sprintf((b),"%.*g",(n),(x))'
* The last two assume trailing zeros should not be kept.
*/
#define Gconvert(x,n,t,b) $d_Gconvert
/* HAS_GETCWD:
* This symbol, if defined, indicates that the getcwd routine is
* available to get the current working directory.
*/
#$d_getcwd HAS_GETCWD /**/
/* HAS_GETESPWNAM:
* This symbol, if defined, indicates that the getespwnam system call is
* available to retrieve enchanced (shadow) password entries by name.
*/
#$d_getespwnam HAS_GETESPWNAM /**/
/* HAS_GETFSSTAT:
* This symbol, if defined, indicates that the getfsstat routine is
* available to stat filesystems in bulk.
*/
#$d_getfsstat HAS_GETFSSTAT /**/
/* HAS_GETGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for sequential access of the group database.
*/
#$d_getgrent HAS_GETGRENT /**/
/* HAS_GETHOSTBYADDR:
* This symbol, if defined, indicates that the gethostbyaddr() routine is
* available to look up hosts by their IP addresses.
*/
#$d_gethbyaddr HAS_GETHOSTBYADDR /**/
/* HAS_GETHOSTBYNAME:
* This symbol, if defined, indicates that the gethostbyname() routine is
* available to look up host names in some data base or other.
*/
#$d_gethbyname HAS_GETHOSTBYNAME /**/
/* HAS_GETHOSTENT:
* This symbol, if defined, indicates that the gethostent() routine is
* available to look up host names in some data base or another.
*/
#$d_gethent HAS_GETHOSTENT /**/
/* HAS_GETHOSTNAME:
* This symbol, if defined, indicates that the C program may use the
* gethostname() routine to derive the host name. See also HAS_UNAME
* and PHOSTNAME.
*/
/* HAS_UNAME:
* This symbol, if defined, indicates that the C program may use the
* uname() routine to derive the host name. See also HAS_GETHOSTNAME
* and PHOSTNAME.
*/
/* PHOSTNAME:
* This symbol, if defined, indicates the command to feed to the
* popen() routine to derive the host name. See also HAS_GETHOSTNAME
* and HAS_UNAME. Note that the command uses a fully qualified path,
* so that it is safe even if used by a process with super-user
* privileges.
*/
/* HAS_PHOSTNAME:
* This symbol, if defined, indicates that the C program may use the
* contents of PHOSTNAME as a command to feed to the popen() routine
* to derive the host name.
*/
#$d_gethname HAS_GETHOSTNAME /**/
#$d_uname HAS_UNAME /**/
#$d_phostname HAS_PHOSTNAME /**/
#ifdef HAS_PHOSTNAME
#define PHOSTNAME "$aphostname" /* How to get the host name */
#endif
/* HAS_GETHOST_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for gethostent(), gethostbyname(), and
* gethostbyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
#$d_gethostprotos HAS_GETHOST_PROTOS /**/
/* HAS_GETMNT:
* This symbol, if defined, indicates that the getmnt routine is
* available to get filesystem mount info by filename.
*/
#$d_getmnt HAS_GETMNT /**/
/* HAS_GETMNTENT:
* This symbol, if defined, indicates that the getmntent routine is
* available to iterate through mounted file systems to get their info.
*/
#$d_getmntent HAS_GETMNTENT /**/
/* HAS_GETNETBYADDR:
* This symbol, if defined, indicates that the getnetbyaddr() routine is
* available to look up networks by their IP addresses.
*/
#$d_getnbyaddr HAS_GETNETBYADDR /**/
/* HAS_GETNETBYNAME:
* This symbol, if defined, indicates that the getnetbyname() routine is
* available to look up networks by their names.
*/
#$d_getnbyname HAS_GETNETBYNAME /**/
/* HAS_GETNETENT:
* This symbol, if defined, indicates that the getnetent() routine is
* available to look up network names in some data base or another.
*/
#$d_getnent HAS_GETNETENT /**/
/* HAS_GETNET_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for getnetent(), getnetbyname(), and
* getnetbyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
#$d_getnetprotos HAS_GETNET_PROTOS /**/
/* HAS_GETPAGESIZE:
* This symbol, if defined, indicates that the getpagesize system call
* is available to get system page size, which is the granularity of
* many memory management calls.
*/
#$d_getpagsz HAS_GETPAGESIZE /**/
/* HAS_GETPROTOENT:
* This symbol, if defined, indicates that the getprotoent() routine is
* available to look up protocols in some data base or another.
*/
#$d_getpent HAS_GETPROTOENT /**/
/* HAS_GETPROTOBYNAME:
* This symbol, if defined, indicates that the getprotobyname()
* routine is available to look up protocols by their name.
*/
/* HAS_GETPROTOBYNUMBER:
* This symbol, if defined, indicates that the getprotobynumber()
* routine is available to look up protocols by their number.
*/
#$d_getpbyname HAS_GETPROTOBYNAME /**/
#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/
/* HAS_GETPROTO_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for getprotoent(), getprotobyname(), and
* getprotobyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/
/* HAS_GETPRPWNAM:
* This symbol, if defined, indicates that the getprpwnam system call is
* available to retrieve protected (shadow) password entries by name.
*/
#$d_getprpwnam HAS_GETPRPWNAM /**/
/* HAS_GETPWENT:
* This symbol, if defined, indicates that the getpwent routine is
* available for sequential access of the passwd database.
* If this is not available, the older getpw() function may be available.
*/
#$d_getpwent HAS_GETPWENT /**/
/* HAS_GETSERVENT:
* This symbol, if defined, indicates that the getservent() routine is
* available to look up network services in some data base or another.
*/
#$d_getsent HAS_GETSERVENT /**/
/* HAS_GETSERV_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for getservent(), getservbyname(), and
* getservbyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
#$d_getservprotos HAS_GETSERV_PROTOS /**/
/* HAS_GETSPNAM:
* This symbol, if defined, indicates that the getspnam system call is
* available to retrieve SysV shadow password entries by name.
*/
#$d_getspnam HAS_GETSPNAM /**/
/* HAS_GETSERVBYNAME:
* This symbol, if defined, indicates that the getservbyname()
* routine is available to look up services by their name.
*/
/* HAS_GETSERVBYPORT:
* This symbol, if defined, indicates that the getservbyport()
* routine is available to look up services by their port.
*/
#$d_getsbyname HAS_GETSERVBYNAME /**/
#$d_getsbyport HAS_GETSERVBYPORT /**/
/* HAS_GNULIBC:
* This symbol, if defined, indicates to the C program that
* the GNU C library is being used.
*/
#$d_gnulibc HAS_GNULIBC /**/
#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
# define _GNU_SOURCE
#endif
/* HAS_HASMNTOPT:
* This symbol, if defined, indicates that the hasmntopt routine is
* available to query the mount options of file systems.
*/
#$d_hasmntopt HAS_HASMNTOPT /**/
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* friends htons() ntohl() ntohs()) are available to do network
* order byte swapping.
*/
/* HAS_HTONS:
* This symbol, if defined, indicates that the htons() routine (and
* friends htonl() ntohl() ntohs()) are available to do network
* order byte swapping.
*/
/* HAS_NTOHL:
* This symbol, if defined, indicates that the ntohl() routine (and
* friends htonl() htons() ntohs()) are available to do network
* order byte swapping.
*/
/* HAS_NTOHS:
* This symbol, if defined, indicates that the ntohs() routine (and
* friends htonl() htons() ntohl()) are available to do network
* order byte swapping.
*/
#$d_htonl HAS_HTONL /**/
#$d_htonl HAS_HTONS /**/
#$d_htonl HAS_NTOHL /**/
#$d_htonl HAS_NTOHS /**/
/* HAS_ICONV:
* This symbol, if defined, indicates that the iconv routine is
* available to do character set conversions.
*/
#$d_iconv HAS_ICONV /**/
/* HAS_INT64_T:
* This symbol will defined if the C compiler supports int64_t.
* Usually the <inttypes.h> needs to be included, but sometimes
* <sys/types.h> is enough.
*/
#$d_int64_t HAS_INT64_T /**/
/* HAS_ISASCII:
* This manifest constant lets the C program know that isascii
* is available.
*/
#$d_isascii HAS_ISASCII /**/
/* HAS_ISNAN:
* This symbol, if defined, indicates that the isnan routine is
* available to check whether a double is a NaN.
*/
#$d_isnan HAS_ISNAN /**/
/* HAS_ISNANL:
* This symbol, if defined, indicates that the isnanl routine is
* available to check whether a long double is a NaN.
*/
#$d_isnanl HAS_ISNANL /**/
/* HAS_LCHOWN:
* This symbol, if defined, indicates that the lchown routine is
* available to operate on a symbolic link (instead of following the
* link).
*/
#$d_lchown HAS_LCHOWN /**/
/* HAS_LDBL_DIG:
* This symbol, if defined, indicates that this system's <float.h>
* or <limits.h> defines the symbol LDBL_DIG, which is the number
* of significant digits in a long double precision number. Unlike
* for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
*/
#$d_ldbl_dig HAS_LDBL_DIG /* */
/* HAS_LONG_DOUBLE:
* This symbol will be defined if the C compiler supports long
* doubles.
*/
/* LONG_DOUBLESIZE:
* This symbol contains the size of a long double, so that the
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long doubles.
*/
#$d_longdbl HAS_LONG_DOUBLE /**/
#ifdef HAS_LONG_DOUBLE
#define LONG_DOUBLESIZE $longdblsize /**/
#endif
/* HAS_LONG_LONG:
* This symbol will be defined if the C compiler supports long long.
*/
/* LONGLONGSIZE:
* This symbol contains the size of a long long, so that the
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long long.
*/
#$d_longlong HAS_LONG_LONG /**/
#ifdef HAS_LONG_LONG
#define LONGLONGSIZE $longlongsize /**/
#endif
/* HAS_LSEEK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the lseek() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern off_t lseek(int, off_t, int);
*/
#$d_lseekproto HAS_LSEEK_PROTO /**/
/* HAS_MADVISE:
* This symbol, if defined, indicates that the madvise system call is
* available to map a file into memory.
*/
#$d_madvise HAS_MADVISE /**/
/* HAS_MEMCHR:
* This symbol, if defined, indicates that the memchr routine is available
* to locate characters within a C string.
*/
#$d_memchr HAS_MEMCHR /**/
/* HAS_MKDTEMP:
* This symbol, if defined, indicates that the mkdtemp routine is
* available to exclusively create a uniquely named temporary directory.
*/
#$d_mkdtemp HAS_MKDTEMP /**/
/* HAS_MKSTEMP:
* This symbol, if defined, indicates that the mkstemp routine is
* available to exclusively create and open a uniquely named
* temporary file.
*/
#$d_mkstemp HAS_MKSTEMP /**/
/* HAS_MKSTEMPS:
* This symbol, if defined, indicates that the mkstemps routine is
* available to excluslvely create and open a uniquely named
* (with a suffix) temporary file.
*/
#$d_mkstemps HAS_MKSTEMPS /**/
/* HAS_MMAP:
* This symbol, if defined, indicates that the mmap system call is
* available to map a file into memory.
*/
/* Mmap_t:
* This symbol holds the return type of the mmap() system call
* (and simultaneously the type of the first argument).
* Usually set to 'void *' or 'cadd_t'.
*/
#$d_mmap HAS_MMAP /**/
#define Mmap_t $mmaptype /**/
/* HAS_MODFL:
* This symbol, if defined, indicates that the modfl routine is
* available to split a long double x into a fractional part f and
* an integer part i such that |f| < 1.0 and (f + i) = x.
*/
#$d_modfl HAS_MODFL /**/
/* HAS_MPROTECT:
* This symbol, if defined, indicates that the mprotect system call is
* available to modify the access protection of a memory mapped file.
*/
#$d_mprotect HAS_MPROTECT /**/
/* HAS_MSG:
* This symbol, if defined, indicates that the entire msg*(2) library is
* supported (IPC mechanism based on message queues).
*/
#$d_msg HAS_MSG /**/
/* HAS_OFF64_T:
* This symbol will be defined if the C compiler supports off64_t.
*/
#$d_off64_t HAS_OFF64_T /**/
/* HAS_OPEN3:
* This manifest constant lets the C program know that the three
* argument form of open(2) is available.
*/
#$d_open3 HAS_OPEN3 /**/
/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
* in joinable (aka undetached) state. NOTE: not defined
* if pthread.h already has defined PTHREAD_CREATE_JOINABLE
* (the new version of the constant).
* If defined, known values are PTHREAD_CREATE_UNDETACHED
* and __UNDETACHED.
*/
#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
/* HAS_PTHREAD_YIELD:
* This symbol, if defined, indicates that the pthread_yield
* routine is available to yield the execution of the current
* thread. sched_yield is preferable to pthread_yield.
*/
/* SCHED_YIELD:
* This symbol defines the way to yield the execution of
* the current thread. Known ways are sched_yield,
* pthread_yield, and pthread_yield with NULL.
*/
/* HAS_SCHED_YIELD:
* This symbol, if defined, indicates that the sched_yield
* routine is available to yield the execution of the current
* thread. sched_yield is preferable to pthread_yield.
*/
#$d_pthread_yield HAS_PTHREAD_YIELD /**/
#define SCHED_YIELD $sched_yield /**/
#$d_sched_yield HAS_SCHED_YIELD /**/
/* HAS_SAFE_BCOPY:
* This symbol, if defined, indicates that the bcopy routine is available
* to copy potentially overlapping memory blocks. Otherwise you should
* probably use memmove() or memcpy(). If neither is defined, roll your
* own version.
*/
#$d_safebcpy HAS_SAFE_BCOPY /**/
/* HAS_SAFE_MEMCPY:
* This symbol, if defined, indicates that the memcpy routine is available
* to copy potentially overlapping memory blocks. Otherwise you should
* probably use memmove() or memcpy(). If neither is defined, roll your
* own version.
*/
#$d_safemcpy HAS_SAFE_MEMCPY /**/
/* HAS_SANE_MEMCMP:
* This symbol, if defined, indicates that the memcmp routine is available
* and can be used to compare relative magnitudes of chars with their high
* bits set. If it is not defined, roll your own version.
*/
#$d_sanemcmp HAS_SANE_MEMCMP /**/
/* HAS_SEM:
* This symbol, if defined, indicates that the entire sem*(2) library is
* supported.
*/
#$d_sem HAS_SEM /**/
/* HAS_SETGRENT:
* This symbol, if defined, indicates that the setgrent routine is
* available for initializing sequential access of the group database.
*/
#$d_setgrent HAS_SETGRENT /**/
/* HAS_SETGROUPS:
* This symbol, if defined, indicates that the setgroups() routine is
* available to set the list of process groups. If unavailable, multiple
* groups are probably not supported.
*/
#$d_setgrps HAS_SETGROUPS /**/
/* HAS_SETHOSTENT:
* This symbol, if defined, indicates that the sethostent() routine is
* available.
*/
#$d_sethent HAS_SETHOSTENT /**/
/* HAS_SETNETENT:
* This symbol, if defined, indicates that the setnetent() routine is
* available.
*/
#$d_setnent HAS_SETNETENT /**/
/* HAS_SETPROTOENT:
* This symbol, if defined, indicates that the setprotoent() routine is
* available.
*/
#$d_setpent HAS_SETPROTOENT /**/
/* HAS_SETPROCTITLE:
* This symbol, if defined, indicates that the setproctitle routine is
* available to set process title.
*/
#$d_setproctitle HAS_SETPROCTITLE /**/
/* HAS_SETPWENT:
* This symbol, if defined, indicates that the setpwent routine is
* available for initializing sequential access of the passwd database.
*/
#$d_setpwent HAS_SETPWENT /**/
/* HAS_SETSERVENT:
* This symbol, if defined, indicates that the setservent() routine is
* available.
*/
#$d_setsent HAS_SETSERVENT /**/
/* HAS_SETVBUF:
* This symbol, if defined, indicates that the setvbuf routine is
* available to change buffering on an open stdio stream.
* to a line-buffered mode.
*/
#$d_setvbuf HAS_SETVBUF /**/
/* USE_SFIO:
* This symbol, if defined, indicates that sfio should
* be used.
*/
#$d_sfio USE_SFIO /**/
/* HAS_SHM:
* This symbol, if defined, indicates that the entire shm*(2) library is
* supported.
*/
#$d_shm HAS_SHM /**/
/* HAS_SIGACTION:
* This symbol, if defined, indicates that Vr4's sigaction() routine
* is available.
*/
#$d_sigaction HAS_SIGACTION /**/
/* HAS_SIGSETJMP:
* This variable indicates to the C program that the sigsetjmp()
* routine is available to save the calling process's registers
* and stack environment for later use by siglongjmp(), and
* to optionally save the process's signal mask. See
* Sigjmp_buf, Sigsetjmp, and Siglongjmp.
*/
/* Sigjmp_buf:
* This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
/* Sigsetjmp:
* This macro is used in the same way as sigsetjmp(), but will invoke
* traditional setjmp() if sigsetjmp isn't available.
* See HAS_SIGSETJMP.
*/
/* Siglongjmp:
* This macro is used in the same way as siglongjmp(), but will invoke
* traditional longjmp() if siglongjmp isn't available.
* See HAS_SIGSETJMP.
*/
#$d_sigsetjmp HAS_SIGSETJMP /**/
#ifdef HAS_SIGSETJMP
#define Sigjmp_buf sigjmp_buf
#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
#else
#define Sigjmp_buf jmp_buf
#define Sigsetjmp(buf,save_mask) setjmp((buf))
#define Siglongjmp(buf,retval) longjmp((buf),(retval))
#endif
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
*/
/* HAS_SOCKETPAIR:
* This symbol, if defined, indicates that the BSD socketpair() call is
* supported.
*/
/* HAS_MSG_CTRUNC:
* This symbol, if defined, indicates that the MSG_CTRUNC is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_MSG_DONTROUTE:
* This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_MSG_OOB:
* This symbol, if defined, indicates that the MSG_OOB is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_MSG_PEEK:
* This symbol, if defined, indicates that the MSG_PEEK is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_MSG_PROXY:
* This symbol, if defined, indicates that the MSG_PROXY is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_SCM_RIGHTS:
* This symbol, if defined, indicates that the SCM_RIGHTS is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
#$d_socket HAS_SOCKET /**/
#$d_sockpair HAS_SOCKETPAIR /**/
#$d_msg_ctrunc HAS_MSG_CTRUNC /**/
#$d_msg_dontroute HAS_MSG_DONTROUTE /**/
#$d_msg_oob HAS_MSG_OOB /**/
#$d_msg_peek HAS_MSG_PEEK /**/
#$d_msg_proxy HAS_MSG_PROXY /**/
#$d_scm_rights HAS_SCM_RIGHTS /**/
/* HAS_SOCKS5_INIT:
* This symbol, if defined, indicates that the socks5_init routine is
* available to initialize SOCKS 5.
*/
#$d_socks5_init HAS_SOCKS5_INIT /**/
/* HAS_SQRTL:
* This symbol, if defined, indicates that the sqrtl routine is
* available to do long double square roots.
*/
#$d_sqrtl HAS_SQRTL /**/
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
*/
#ifndef USE_STAT_BLOCKS
#$d_statblks USE_STAT_BLOCKS /**/
#endif
/* HAS_STRUCT_STATFS_F_FLAGS:
* This symbol, if defined, indicates that the struct statfs
* does have the f_flags member containing the mount flags of
* the filesystem containing the file.
* This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
* not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
* have statfs() and struct statfs, they have ustat() and getmnt()
* with struct ustat and struct fs_data.
*/
#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/
/* HAS_STRUCT_STATFS:
* This symbol, if defined, indicates that the struct statfs
* to do statfs() is supported.
*/
#$d_statfs_s HAS_STRUCT_STATFS /**/
/* HAS_FSTATVFS:
* This symbol, if defined, indicates that the fstatvfs routine is
* available to stat filesystems by file descriptors.
*/
#$d_fstatvfs HAS_FSTATVFS /**/
/* USE_STDIO_PTR:
* This symbol is defined if the _ptr and _cnt fields (or similar)
* of the stdio FILE structure can be used to access the stdio buffer
* for a file handle. If this is defined, then the FILE_ptr(fp)
* and FILE_cnt(fp) macros will also be defined and should be used
* to access these fields.
*/
/* FILE_ptr:
* This macro is used to access the _ptr field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* defined if USE_STDIO_PTR is defined.
*/
/* STDIO_PTR_LVALUE:
* This symbol is defined if the FILE_ptr macro can be used as an
* lvalue.
*/
/* FILE_cnt:
* This macro is used to access the _cnt field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* defined if USE_STDIO_PTR is defined.
*/
/* STDIO_CNT_LVALUE:
* This symbol is defined if the FILE_cnt macro can be used as an
* lvalue.
*/
/* STDIO_PTR_LVAL_SETS_CNT:
* This symbol is defined if using the FILE_ptr macro as an lvalue
* to increase the pointer by n has the side effect of decreasing the
* value of File_cnt(fp) by n.
*/
/* STDIO_PTR_LVAL_NOCHANGE_CNT:
* This symbol is defined if using the FILE_ptr macro as an lvalue
* to increase the pointer by n leaves File_cnt(fp) unchanged.
*/
#$d_stdstdio USE_STDIO_PTR /**/
#ifdef USE_STDIO_PTR
#define FILE_ptr(fp) $stdio_ptr
#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
#define FILE_cnt(fp) $stdio_cnt
#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
#$d_stdio_ptr_lval_sets_cnt STDIO_PTR_LVAL_SETS_CNT /**/
#$d_stdio_ptr_lval_nochange_cnt STDIO_PTR_LVAL_NOCHANGE_CNT /**/
#endif
/* USE_STDIO_BASE:
* This symbol is defined if the _base field (or similar) of the
* stdio FILE structure can be used to access the stdio buffer for
* a file handle. If this is defined, then the FILE_base(fp) macro
* will also be defined and should be used to access this field.
* Also, the FILE_bufsiz(fp) macro will be defined and should be used
* to determine the number of bytes in the buffer. USE_STDIO_BASE
* will never be defined unless USE_STDIO_PTR is.
*/
/* FILE_base:
* This macro is used to access the _base field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* defined if USE_STDIO_BASE is defined.
*/
/* FILE_bufsiz:
* This macro is used to determine the number of bytes in the I/O
* buffer pointed to by _base field (or equivalent) of the FILE
* structure pointed to its argument. This macro will always be defined
* if USE_STDIO_BASE is defined.
*/
#$d_stdiobase USE_STDIO_BASE /**/
#ifdef USE_STDIO_BASE
#define FILE_base(fp) $stdio_base
#define FILE_bufsiz(fp) $stdio_bufsiz
#endif
/* HAS_STRERROR:
* This symbol, if defined, indicates that the strerror routine is
* available to translate error numbers to strings. See the writeup
* of Strerror() in this file before you try to define your own.
*/
/* HAS_SYS_ERRLIST:
* This symbol, if defined, indicates that the sys_errlist array is
* available to translate error numbers to strings. The extern int
* sys_nerr gives the size of that table.
*/
/* Strerror:
* This preprocessor symbol is defined as a macro if strerror() is
* not available to translate error numbers to strings but sys_errlist[]
* array is there.
*/
#$d_strerror HAS_STRERROR /**/
#$d_syserrlst HAS_SYS_ERRLIST /**/
#define Strerror(e) $d_strerrm
/* HAS_STRTOLD:
* This symbol, if defined, indicates that the strtold routine is
* available to convert strings to long doubles.
*/
#$d_strtold HAS_STRTOLD /**/
/* HAS_STRTOLL:
* This symbol, if defined, indicates that the strtoll routine is
* available to convert strings to long longs.
*/
#$d_strtoll HAS_STRTOLL /**/
/* HAS_STRTOULL:
* This symbol, if defined, indicates that the strtoull routine is
* available to convert strings to unsigned long longs.
*/
#$d_strtoull HAS_STRTOULL /**/
/* HAS_STRTOUQ:
* This symbol, if defined, indicates that the strtouq routine is
* available to convert strings to unsigned long longs (quads).
*/
#$d_strtouq HAS_STRTOUQ /**/
/* HAS_TELLDIR_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the telldir() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern long telldir _((DIR*));
*/
#$d_telldirproto HAS_TELLDIR_PROTO /**/
/* Time_t:
* This symbol holds the type returned by time(). It can be long,
* or time_t on BSD sites (in which case <sys/types.h> should be
* included).
*/
#define Time_t $timetype /* Time type */
/* HAS_TIMES:
* This symbol, if defined, indicates that the times() routine exists.
* Note that this became obsolete on some systems (SUNOS), which now
* use getrusage(). It may be necessary to include <sys/times.h>.
*/
#$d_times HAS_TIMES /**/
/* HAS_UNION_SEMUN:
* This symbol, if defined, indicates that the union semun is
* defined by including <sys/sem.h>. If not, the user code
* probably needs to define it as:
* union semun {
* int val;
* struct semid_ds *buf;
* unsigned short *array;
* }
*/
/* USE_SEMCTL_SEMUN:
* This symbol, if defined, indicates that union semun is
* used for semctl IPC_STAT.
*/
/* USE_SEMCTL_SEMID_DS:
* This symbol, if defined, indicates that struct semid_ds * is
* used for semctl IPC_STAT.
*/
#$d_union_semun HAS_UNION_SEMUN /**/
#$d_semctl_semun USE_SEMCTL_SEMUN /**/
#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/
/* HAS_USTAT:
* This symbol, if defined, indicates that the ustat system call is
* available to query file system statistics by dev_t.
*/
#$d_ustat HAS_USTAT /**/
/* HAS_VFORK:
* This symbol, if defined, indicates that vfork() exists.
*/
#$d_vfork HAS_VFORK /**/
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* appropriate return type of a signal handler. Thus, you can declare
* a signal handler using "Signal_t (*handler)()", and define the
* handler using "Signal_t handler(sig)".
*/
#define Signal_t $signal_t /* Signal handler's return type */
/* HAS_VPRINTF:
* This symbol, if defined, indicates that the vprintf routine is available
* to printf with a pointer to an argument list. If unavailable, you
* may need to write your own, probably in terms of _doprnt().
*/
/* USE_CHAR_VSPRINTF:
* This symbol is defined if this system has vsprintf() returning type
* (char*). The trend seems to be to declare it as "int vsprintf()". It
* is up to the package author to declare vsprintf correctly based on the
* symbol.
*/
#$d_vprintf HAS_VPRINTF /**/
#$d_charvspr USE_CHAR_VSPRINTF /**/
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
*/
#$usedl USE_DYNAMIC_LOADING /**/
/* DOUBLESIZE:
* This symbol contains the size of a double, so that the C preprocessor
* can make decisions based on it.
*/
#define DOUBLESIZE $doublesize /**/
/* EBCDIC:
* This symbol, if defined, indicates that this system uses
* EBCDIC encoding.
*/
#$ebcdic EBCDIC /**/
/* FFLUSH_NULL:
* This symbol, if defined, tells that fflush(NULL) does flush
* all pending stdio output.
*/
/* FFLUSH_ALL:
* This symbol, if defined, tells that to flush
* all pending stdio output one must loop through all
* the stdio file handles stored in an array and fflush them.
* Note that if fflushNULL is defined, fflushall will not
* even be probed for and will be left undefined.
*/
#$fflushNULL FFLUSH_NULL /**/
#$fflushall FFLUSH_ALL /**/
/* Fpos_t:
* This symbol holds the type used to declare file positions in libc.
* It can be fpos_t, long, uint, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
#define Fpos_t $fpostype /* File position type */
/* Gid_t_f:
* This symbol defines the format string used for printing a Gid_t.
*/
#define Gid_t_f $gidformat /**/
/* Gid_t_sign:
* This symbol holds the signedess of a Gid_t.
* 1 for unsigned, -1 for signed.
*/
#define Gid_t_sign $gidsign /* GID sign */
/* Gid_t_size:
* This symbol holds the size of a Gid_t in bytes.
*/
#define Gid_t_size $gidsize /* GID size */
/* Gid_t:
* This symbol holds the return type of getgid() and the type of
* argument to setrgid() and related functions. Typically,
* it is the type of group ids in the kernel. It can be int, ushort,
* gid_t, etc... It may be necessary to include <sys/types.h> to get
* any typedef'ed information.
*/
#define Gid_t $gidtype /* Type for getgid(), etc... */
/* Groups_t:
* This symbol holds the type used for the second argument to
* getgroups() and setgroups(). Usually, this is the same as
* gidtype (gid_t) , but sometimes it isn't.
* It can be int, ushort, gid_t, etc...
* It may be necessary to include <sys/types.h> to get any
* typedef'ed information. This is only required if you have
* getgroups() or setgroups()..
*/
#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */
#endif
/* DB_Prefix_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
* int, while in newer ones it is u_int32_t.
*/
/* DB_Hash_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
* int, while in newer ones it is size_t.
*/
#define DB_Hash_t $db_hashtype /**/
#define DB_Prefix_t $db_prefixtype /**/
/* I_GRP:
* This symbol, if defined, indicates to the C program that it should
* include <grp.h>.
*/
/* GRPASSWD:
* This symbol, if defined, indicates to the C program that struct group
* in <grp.h> contains gr_passwd.
*/
#$i_grp I_GRP /**/
#$d_grpasswd GRPASSWD /**/
/* I_ICONV:
* This symbol, if defined, indicates that <iconv.h> exists and
* should be included.
*/
#$i_iconv I_ICONV /**/
/* I_IEEEFP:
* This symbol, if defined, indicates that <ieeefp.h> exists and
* should be included.
*/
#$i_ieeefp I_IEEEFP /**/
/* I_INTTYPES:
* This symbol, if defined, indicates to the C program that it should
* include <inttypes.h>.
*/
#$i_inttypes I_INTTYPES /**/
/* I_LIBUTIL:
* This symbol, if defined, indicates that <libutil.h> exists and
* should be included.
*/
#$i_libutil I_LIBUTIL /**/
/* I_MACH_CTHREADS:
* This symbol, if defined, indicates to the C program that it should
* include <mach/cthreads.h>.
*/
#$i_machcthr I_MACH_CTHREADS /**/
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
*/
#$i_mntent I_MNTENT /**/
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
* should be included.
*/
#$i_netdb I_NETDB /**/
/* I_NETINET_TCP:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/tcp.h>.
*/
#$i_netinettcp I_NETINET_TCP /**/
/* I_POLL:
* This symbol, if defined, indicates that <poll.h> exists and
* should be included.
*/
#$i_poll I_POLL /**/
/* I_PROT:
* This symbol, if defined, indicates that <prot.h> exists and
* should be included.
*/
#$i_prot I_PROT /**/
/* I_PTHREAD:
* This symbol, if defined, indicates to the C program that it should
* include <pthread.h>.
*/
#$i_pthread I_PTHREAD /**/
/* I_PWD:
* This symbol, if defined, indicates to the C program that it should
* include <pwd.h>.
*/
/* PWQUOTA:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_quota.
*/
/* PWAGE:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_age.
*/
/* PWCHANGE:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_change.
*/
/* PWCLASS:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_class.
*/
/* PWEXPIRE:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_expire.
*/
/* PWCOMMENT:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_comment.
*/
/* PWGECOS:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_gecos.
*/
/* PWPASSWD:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_passwd.
*/
#$i_pwd I_PWD /**/
#$d_pwquota PWQUOTA /**/
#$d_pwage PWAGE /**/
#$d_pwchange PWCHANGE /**/
#$d_pwclass PWCLASS /**/
#$d_pwexpire PWEXPIRE /**/
#$d_pwcomment PWCOMMENT /**/
#$d_pwgecos PWGECOS /**/
#$d_pwpasswd PWPASSWD /**/
/* I_SHADOW:
* This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
*/
#$i_shadow I_SHADOW /**/
/* I_SOCKS:
* This symbol, if defined, indicates that <socks.h> exists and
* should be included.
*/
#$i_socks I_SOCKS /**/
/* I_SUNMATH:
* This symbol, if defined, indicates that <sunmath.h> exists and
* should be included.
*/
#$i_sunmath I_SUNMATH /**/
/* I_SYSLOG:
* This symbol, if defined, indicates that <syslog.h> exists and
* should be included.
*/
#$i_syslog I_SYSLOG /**/
/* I_SYSMODE:
* This symbol, if defined, indicates that <sys/mode.h> exists and
* should be included.
*/
#$i_sysmode I_SYSMODE /**/
/* I_SYS_MOUNT:
* This symbol, if defined, indicates that <sys/mount.h> exists and
* should be included.
*/
#$i_sysmount I_SYS_MOUNT /**/
/* I_SYS_STATFS:
* This symbol, if defined, indicates that <sys/statfs.h> exists.
*/
#$i_sysstatfs I_SYS_STATFS /**/
/* I_SYS_STATVFS:
* This symbol, if defined, indicates that <sys/statvfs.h> exists and
* should be included.
*/
#$i_sysstatvfs I_SYS_STATVFS /**/
/* I_SYSUIO:
* This symbol, if defined, indicates that <sys/uio.h> exists and
* should be included.
*/
#$i_sysuio I_SYSUIO /**/
/* I_SYSUTSNAME:
* This symbol, if defined, indicates that <sys/utsname.h> exists and
* should be included.
*/
#$i_sysutsname I_SYSUTSNAME /**/
/* I_SYS_VFS:
* This symbol, if defined, indicates that <sys/vfs.h> exists and
* should be included.
*/
#$i_sysvfs I_SYS_VFS /**/
/* I_TIME:
* This symbol, if defined, indicates to the C program that it should
* include <time.h>.
*/
/* I_SYS_TIME:
* This symbol, if defined, indicates to the C program that it should
* include <sys/time.h>.
*/
/* I_SYS_TIME_KERNEL:
* This symbol, if defined, indicates to the C program that it should
* include <sys/time.h> with KERNEL defined.
*/
#$i_time I_TIME /**/
#$i_systime I_SYS_TIME /**/
#$i_systimek I_SYS_TIME_KERNEL /**/
/* I_USTAT:
* This symbol, if defined, indicates that <ustat.h> exists and
* should be included.
*/
#$i_ustat I_USTAT /**/
/* PERL_INC_VERSION_LIST:
* This variable specifies the list of subdirectories in over
* which perl.c:incpush() and lib/lib.pm will automatically
* search when adding directories to @INC, in a format suitable
* for a C initialization string. See the inc_version_list entry
* in Porting/Glossary for more details.
*/
#define PERL_INC_VERSION_LIST $inc_version_list_init /**/
/* INSTALL_USR_BIN_PERL:
* This symbol, if defined, indicates that Perl is to be installed
* also as /usr/bin/perl.
*/
#$installusrbinperl INSTALL_USR_BIN_PERL /**/
/* PERL_PRIfldbl:
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'f') for output.
*/
/* PERL_PRIgldbl:
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'g') for output.
*/
/* PERL_PRIeldbl:
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'e') for output.
*/
/* PERL_SCNfldbl:
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'f') for input.
*/
#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/
#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/
#$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/
#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/
/* Off_t:
* This symbol holds the type used to declare offsets in the kernel.
* It can be int, long, off_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
/* LSEEKSIZE:
* This symbol holds the number of bytes used by the Off_t.
*/
/* Off_t_size:
* This symbol holds the number of bytes used by the Off_t.
*/
#define Off_t $lseektype /* <offset> type */
#define LSEEKSIZE $lseeksize /* <offset> size */
#define Off_t_size $lseeksize /* <offset> size */
/* Free_t:
* This variable contains the return type of free(). It is usually
* void, but occasionally int.
*/
/* Malloc_t:
* This symbol is the type of pointer returned by malloc and realloc.
*/
#define Malloc_t $malloctype /**/
#define Free_t $freetype /**/
/* MYMALLOC:
* This symbol, if defined, indicates that we're using our own malloc.
*/
#$d_mymalloc MYMALLOC /**/
/* Mode_t:
* This symbol holds the type used to declare file modes
* for systems calls. It is usually mode_t, but may be
* int or unsigned short. It may be necessary to include <sys/types.h>
* to get any typedef'ed information.
*/
#define Mode_t $modetype /* file mode parameter for system calls */
/* VAL_O_NONBLOCK:
* This symbol is to be used during open() or fcntl(F_SETFL) to turn on
* non-blocking I/O for the file descriptor. Note that there is no way
* back, i.e. you cannot turn it blocking again this way. If you wish to
* alternatively switch between blocking and non-blocking, use the
* ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
*/
/* VAL_EAGAIN:
* This symbol holds the errno error code set by read() when no data was
* present on the non-blocking file descriptor.
*/
/* RD_NODATA:
* This symbol holds the return code from read() when no data is present
* on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
* not defined, then you can't distinguish between no data and EOF by
* issuing a read(). You'll have to find another way to tell for sure!
*/
/* EOF_NONBLOCK:
* This symbol, if defined, indicates to the C program that a read() on
* a non-blocking file descriptor will return 0 on EOF, and not the value
* held in RD_NODATA (-1 usually, in that case!).
*/
#define VAL_O_NONBLOCK $o_nonblock
#define VAL_EAGAIN $eagain
#define RD_NODATA $rd_nodata
#$d_eofnblk EOF_NONBLOCK
/* Netdb_host_t:
* This symbol holds the type used for the 1st argument
* to gethostbyaddr().
*/
/* Netdb_hlen_t:
* This symbol holds the type used for the 2nd argument
* to gethostbyaddr().
*/
/* Netdb_name_t:
* This symbol holds the type used for the argument to
* gethostbyname().
*/
/* Netdb_net_t:
* This symbol holds the type used for the 1st argument to
* getnetbyaddr().
*/
#define Netdb_host_t $netdb_host_type /**/
#define Netdb_hlen_t $netdb_hlen_type /**/
#define Netdb_name_t $netdb_name_type /**/
#define Netdb_net_t $netdb_net_type /**/
/* PERL_OTHERLIBDIRS:
* This variable contains a colon-separated set of paths for the perl
* binary to search for additional library files or modules.
* These directories will be tacked to the end of @INC.
* Perl will automatically search below each path for version-
* and architecture-specific directories. See PERL_INC_VERSION_LIST
* for more details.
*/
#$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/
/* IVTYPE:
* This symbol defines the C type used for Perl's IV.
*/
/* UVTYPE:
* This symbol defines the C type used for Perl's UV.
*/
/* I8TYPE:
* This symbol defines the C type used for Perl's I8.
*/
/* U8TYPE:
* This symbol defines the C type used for Perl's U8.
*/
/* I16TYPE:
* This symbol defines the C type used for Perl's I16.
*/
/* U16TYPE:
* This symbol defines the C type used for Perl's U16.
*/
/* I32TYPE:
* This symbol defines the C type used for Perl's I32.
*/
/* U32TYPE:
* This symbol defines the C type used for Perl's U32.
*/
/* I64TYPE:
* This symbol defines the C type used for Perl's I64.
*/
/* U64TYPE:
* This symbol defines the C type used for Perl's U64.
*/
/* NVTYPE:
* This symbol defines the C type used for Perl's NV.
*/
/* IVSIZE:
* This symbol contains the sizeof(IV).
*/
/* UVSIZE:
* This symbol contains the sizeof(UV).
*/
/* I8SIZE:
* This symbol contains the sizeof(I8).
*/
/* U8SIZE:
* This symbol contains the sizeof(U8).
*/
/* I16SIZE:
* This symbol contains the sizeof(I16).
*/
/* U16SIZE:
* This symbol contains the sizeof(U16).
*/
/* I32SIZE:
* This symbol contains the sizeof(I32).
*/
/* U32SIZE:
* This symbol contains the sizeof(U32).
*/
/* I64SIZE:
* This symbol contains the sizeof(I64).
*/
/* U64SIZE:
* This symbol contains the sizeof(U64).
*/
/* NVSIZE:
* This symbol contains the sizeof(NV).
*/
/* NV_PRESERVES_UV:
* This symbol, if defined, indicates that a variable of type NVTYPE
* can preserve all the bits of a variable of type UVTYPE.
*/
/* NV_PRESERVES_UV_BITS:
* This symbol contains the number of bits a variable of type NVTYPE
* can preserve of a variable of type UVTYPE.
*/
#define IVTYPE $ivtype /**/
#define UVTYPE $uvtype /**/
#define I8TYPE $i8type /**/
#define U8TYPE $u8type /**/
#define I16TYPE $i16type /**/
#define U16TYPE $u16type /**/
#define I32TYPE $i32type /**/
#define U32TYPE $u32type /**/
#ifdef HAS_QUAD
#define I64TYPE $i64type /**/
#define U64TYPE $u64type /**/
#endif
#define NVTYPE $nvtype /**/
#define IVSIZE $ivsize /**/
#define UVSIZE $uvsize /**/
#define I8SIZE $i8size /**/
#define U8SIZE $u8size /**/
#define I16SIZE $i16size /**/
#define U16SIZE $u16size /**/
#define I32SIZE $i32size /**/
#define U32SIZE $u32size /**/
#ifdef HAS_QUAD
#define I64SIZE $i64size /**/
#define U64SIZE $u64size /**/
#endif
#define NVSIZE $nvsize /**/
#$d_nv_preserves_uv NV_PRESERVES_UV
#define NV_PRESERVES_UV_BITS $d_nv_preserves_uv_bits
/* IVdf:
* This symbol defines the format string used for printing a Perl IV
* as a signed decimal integer.
*/
/* UVuf:
* This symbol defines the format string used for printing a Perl UV
* as an unsigned decimal integer.
*/
/* UVof:
* This symbol defines the format string used for printing a Perl UV
* as an unsigned octal integer.
*/
/* UVxf:
* This symbol defines the format string used for printing a Perl UV
* as an unsigned hexadecimal integer in lowercase abcdef.
*/
/* NVef:
* This symbol defines the format string used for printing a Perl NV
* using %e-ish floating point format.
*/
/* NVff:
* This symbol defines the format string used for printing a Perl NV
* using %f-ish floating point format.
*/
/* NVgf:
* This symbol defines the format string used for printing a Perl NV
* using %g-ish floating point format.
*/
#define IVdf $ivdformat /**/
#define UVuf $uvuformat /**/
#define UVof $uvoformat /**/
#define UVxf $uvxformat /**/
#define NVef $nveformat /**/
#define NVff $nvfformat /**/
#define NVgf $nvgformat /**/
/* Pid_t:
* This symbol holds the type used to declare process ids in the kernel.
* It can be int, uint, pid_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
#define Pid_t $pidtype /* PID type */
/* PRIVLIB:
* This symbol contains the name of the private library for this package.
* The library is private in the sense that it needn't be in anyone's
* execution path, but it should be accessible by the world. The program
* should be prepared to do ~ expansion.
*/
/* PRIVLIB_EXP:
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
#define PRIVLIB "$privlib" /**/
#define PRIVLIB_EXP "$privlibexp" /**/
/* PTRSIZE:
* This symbol contains the size of a pointer, so that the C preprocessor
* can make decisions based on it. It will be sizeof(void *) if
* the compiler supports (void *); otherwise it will be
* sizeof(char *).
*/
#define PTRSIZE $ptrsize /**/
/* Drand01:
* This macro is to be used to generate uniformly distributed
* random numbers over the range [0., 1.[. You may have to supply
* an 'extern double drand48();' in your program since SunOS 4.1.3
* doesn't provide you with anything relevant in it's headers.
* See HAS_DRAND48_PROTO.
*/
/* Rand_seed_t:
* This symbol defines the type of the argument of the
* random seed function.
*/
/* seedDrand01:
* This symbol defines the macro to be used in seeding the
* random number generator (see Drand01).
*/
/* RANDBITS:
* This symbol indicates how many bits are produced by the
* function used to generate normalized random numbers.
* Values include 15, 16, 31, and 48.
*/
#define Drand01() $drand01 /**/
#define Rand_seed_t $randseedtype /**/
#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
#define RANDBITS $randbits /**/
/* SELECT_MIN_BITS:
* This symbol holds the minimum number of bits operated by select.
* That is, if you do select(n, ...), how many bits at least will be
* cleared in the masks if some activity is detected. Usually this
* is either n or 32*ceil(n/32), especially many little-endians do
* the latter. This is only useful if you have select(), naturally.
*/
#define SELECT_MIN_BITS $selectminbits /**/
/* Select_fd_set_t:
* This symbol holds the type used for the 2nd, 3rd, and 4th
* arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
* is defined, and 'int *' otherwise. This is only useful if you
* have select(), of course.
*/
#define Select_fd_set_t $selecttype /**/
/* SIG_NAME:
* This symbol contains a list of signal names in order of
* signal number. This is intended
* to be used as a static array initialization, like this:
* char *sig_name[] = { SIG_NAME };
* The signals in the list are separated with commas, and each signal
* is surrounded by double quotes. There is no leading SIG in the signal
* name, i.e. SIGQUIT is known as "QUIT".
* Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
* etc., where nn is the actual signal number (e.g. NUM37).
* The signal number for sig_name[i] is stored in sig_num[i].
* The last element is 0 to terminate the list with a NULL. This
* corresponds to the 0 at the end of the sig_num list.
*/
/* SIG_NUM:
* This symbol contains a list of signal numbers, in the same order as the
* SIG_NAME list. It is suitable for static array initialization, as in:
* int sig_num[] = { SIG_NUM };
* The signals in the list are separated with commas, and the indices
* within that list and the SIG_NAME list match, so it's easy to compute
* the signal name from a number or vice versa at the price of a small
* dynamic linear lookup.
* Duplicates are allowed, but are moved to the end of the list.
* The signal number corresponding to sig_name[i] is sig_number[i].
* if (i < NSIG) then sig_number[i] == i.
* The last element is 0, corresponding to the 0 at the end of
* the sig_name list.
*/
#define SIG_NAME $sig_name_init /**/
#define SIG_NUM $sig_num_init /**/
/* SITEARCH:
* This symbol contains the name of the private library for this package.
* The library is private in the sense that it needn't be in anyone's
* execution path, but it should be accessible by the world. The program
* should be prepared to do ~ expansion.
* The standard distribution will put nothing in this directory.
* After perl has been installed, users may install their own local
* architecture-dependent modules in this directory with
* MakeMaker Makefile.PL
* or equivalent. See INSTALL for details.
*/
/* SITEARCH_EXP:
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
#define SITEARCH "$sitearch" /**/
#define SITEARCH_EXP "$sitearchexp" /**/
/* SITELIB:
* This symbol contains the name of the private library for this package.
* The library is private in the sense that it needn't be in anyone's
* execution path, but it should be accessible by the world. The program
* should be prepared to do ~ expansion.
* The standard distribution will put nothing in this directory.
* After perl has been installed, users may install their own local
* architecture-independent modules in this directory with
* MakeMaker Makefile.PL
* or equivalent. See INSTALL for details.
*/
/* SITELIB_EXP:
* This symbol contains the ~name expanded version of SITELIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
/* SITELIB_STEM:
* This define is SITELIB_EXP with any trailing version-specific component
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
#define SITELIB "$sitelib" /**/
#define SITELIB_EXP "$sitelibexp" /**/
#define SITELIB_STEM "$sitelib_stem" /**/
/* Size_t_size:
* This symbol holds the size of a Size_t in bytes.
*/
#define Size_t_size $sizesize /* */
/* Size_t:
* This symbol holds the type used to declare length parameters
* for string functions. It is usually size_t, but may be
* unsigned long, int, etc. It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
#define Size_t $sizetype /* length paramater for string functions */
/* Sock_size_t:
* This symbol holds the type used for the size argument of
* various socket calls (just the base type, not the pointer-to).
*/
#define Sock_size_t $socksizetype /**/
/* SSize_t:
* This symbol holds the type used by functions that return
* a count of bytes or an error condition. It must be a signed type.
* It is usually ssize_t, but may be long or int, etc.
* It may be necessary to include <sys/types.h> or <unistd.h>
* to get any typedef'ed information.
* We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
*/
#define SSize_t $ssizetype /* signed count of bytes */
/* STARTPERL:
* This variable contains the string to put in front of a perl
* script to make sure (one hopes) that it runs with perl and not
* some shell.
*/
#define STARTPERL "$startperl" /**/
/* HAS_STDIO_STREAM_ARRAY:
* This symbol, if defined, tells that there is an array
* holding the stdio streams.
*/
/* STDIO_STREAM_ARRAY:
* This symbol tells the name of the array holding the stdio streams.
* Usual values include _iob, __iob, and __sF.
*/
#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/
#define STDIO_STREAM_ARRAY $stdio_stream_array
/* Uid_t_f:
* This symbol defines the format string used for printing a Uid_t.
*/
#define Uid_t_f $uidformat /**/
/* Uid_t_sign:
* This symbol holds the signedess of a Uid_t.
* 1 for unsigned, -1 for signed.
*/
#define Uid_t_sign $uidsign /* UID sign */
/* Uid_t_size:
* This symbol holds the size of a Uid_t in bytes.
*/
#define Uid_t_size $uidsize /* UID size */
/* Uid_t:
* This symbol holds the type used to declare user ids in the kernel.
* It can be int, ushort, uid_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
#define Uid_t $uidtype /* UID type */
/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
* will be employed (be they 32 or 64 bits). The minimal possible
* 64-bitness is used, just enough to get 64-bit integers into Perl.
* This may mean using for example "long longs", while your memory
* may still be limited to 2 gigabytes.
*/
/* USE_64_BIT_ALL:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
* will be used (be they 32 or 64 bits). The maximal possible
* 64-bitness is employed: LP64 or ILP64, meaning that you will
* be able to use more than 2 gigabytes of memory. This mode is
* even more binary incompatible than USE_64_BIT_INT. You may not
* be able to run the resulting executable in a 32-bit CPU at all or
* you may need at least to reboot your OS to 64-bit mode.
*/
#ifndef USE_64_BIT_INT
#$use64bitint USE_64_BIT_INT /**/
#endif
#ifndef USE_64_BIT_ALL
#$use64bitall USE_64_BIT_ALL /**/
#endif
/* USE_LARGE_FILES:
* This symbol, if defined, indicates that large file support
* should be used when available.
*/
#ifndef USE_LARGE_FILES
#$uselargefiles USE_LARGE_FILES /**/
#endif
/* USE_LONG_DOUBLE:
* This symbol, if defined, indicates that long doubles should
* be used when available.
*/
#ifndef USE_LONG_DOUBLE
#$uselongdouble USE_LONG_DOUBLE /**/
#endif
/* USE_MORE_BITS:
* This symbol, if defined, indicates that 64-bit interfaces and
* long doubles should be used when available.
*/
#ifndef USE_MORE_BITS
#$usemorebits USE_MORE_BITS /**/
#endif
/* MULTIPLICITY:
* This symbol, if defined, indicates that Perl should
* be built to use multiplicity.
*/
#ifndef MULTIPLICITY
#$usemultiplicity MULTIPLICITY /**/
#endif
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
* be used throughout. If not defined, stdio should be
* used in a fully backward compatible manner.
*/
#ifndef USE_PERLIO
#$useperlio USE_PERLIO /**/
#endif
/* USE_SOCKS:
* This symbol, if defined, indicates that Perl should
* be built to use socks.
*/
#ifndef USE_SOCKS
#$usesocks USE_SOCKS /**/
#endif
/* USE_ITHREADS:
* This symbol, if defined, indicates that Perl should be built to
* use the interpreter-based threading implementation.
*/
/* USE_5005THREADS:
* This symbol, if defined, indicates that Perl should be built to
* use the 5.005-based threading implementation.
*/
/* OLD_PTHREADS_API:
* This symbol, if defined, indicates that Perl should
* be built to use the old draft POSIX threads API.
*/
#$use5005threads USE_5005THREADS /**/
#$useithreads USE_ITHREADS /**/
#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
#define USE_THREADS /* until src is revised*/
#endif
#$d_oldpthreads OLD_PTHREADS_API /**/
/* PERL_VENDORARCH:
* If defined, this symbol contains the name of a private library.
* The library is private in the sense that it needn't be in anyone's
* execution path, but it should be accessible by the world.
* It may have a ~ on the front.
* The standard distribution will put nothing in this directory.
* Vendors who distribute perl may wish to place their own
* architecture-dependent modules and extensions in this directory with
* MakeMaker Makefile.PL INSTALLDIRS=vendor
* or equivalent. See INSTALL for details.
*/
/* PERL_VENDORARCH_EXP:
* This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
#$d_vendorarch PERL_VENDORARCH "$vendorarch" /**/
#$d_vendorarch PERL_VENDORARCH_EXP "$vendorarchexp" /**/
/* PERL_VENDORLIB_EXP:
* This symbol contains the ~name expanded version of VENDORLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
/* PERL_VENDORLIB_STEM:
* This define is PERL_VENDORLIB_EXP with any trailing version-specific component
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/
#$d_vendorlib PERL_VENDORLIB_STEM "$vendorlib_stem" /**/
/* VOIDFLAGS:
* This symbol indicates how much support of the void type is given by this
* compiler. What various bits mean:
*
* 1 = supports declaration of void
* 2 = supports arrays of pointers to functions returning void
* 4 = supports comparisons between pointers to void functions and
* addresses of void functions
* 8 = suports declaration of generic void pointers
*
* The package designer should define VOIDUSED to indicate the requirements
* of the package. This can be done either by #defining VOIDUSED before
* including config.h, or by defining defvoidused in Myinit.U. If the
* latter approach is taken, only those flags will be tested. If the
* level of void support necessary is not present, defines void to int.
*/
#ifndef VOIDUSED
#define VOIDUSED $defvoidused
#endif
#define VOIDFLAGS $voidflags
#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
#define void int /* is void to be avoided? */
#define M_VOID /* Xenix strikes again */
#endif
/* PERL_XS_APIVERSION:
* This variable contains the version of the oldest perl binary
* compatible with the present perl. perl.c:incpush() and
* lib/lib.pm will automatically search in $sitearch for older
* directories across major versions back to xs_apiversion.
* This is only useful if you have a perl library directory tree
* structured like the default one.
* See INSTALL for how this works.
* The versioned site_perl directory was introduced in 5.005,
* so that is the lowest possible value.
* Since this can depend on compile time options (such as
* bincompat) it is set by Configure. Other non-default sources
* of potential incompatibility, such as multiplicity, threads,
* debugging, 64bits, sfio, etc., are not checked for currently,
* though in principle we could go snooping around in old
* Config.pm files.
*/
/* PERL_PM_APIVERSION:
* This variable contains the version of the oldest perl
* compatible with the present perl. (That is, pure perl modules
* written for pm_apiversion will still work for the current
* version). perl.c:incpush() and lib/lib.pm will automatically
* search in $sitelib for older directories across major versions
* back to pm_apiversion. This is only useful if you have a perl
* library directory tree structured like the default one. The
* versioned site_perl library was introduced in 5.005, so that's
* the default setting for this variable. It's hard to imagine
* it changing before Perl6. It is included here for symmetry
* with xs_apiveprsion -- the searching algorithms will
* (presumably) be similar.
* See the INSTALL file for how this works.
*/
#define PERL_XS_APIVERSION "$xs_apiversion"
#define PERL_PM_APIVERSION "$pm_apiversion"
/* HAS_GETPGRP:
* This symbol, if defined, indicates that the getpgrp routine is
* available to get the current process group.
*/
/* USE_BSD_GETPGRP:
* This symbol, if defined, indicates that getpgrp needs one
* arguments whereas USG one needs none.
*/
#$d_getpgrp HAS_GETPGRP /**/
#$d_bsdgetpgrp USE_BSD_GETPGRP /**/
/* HAS_SETPGRP:
* This symbol, if defined, indicates that the setpgrp routine is
* available to set the current process group.
*/
/* USE_BSD_SETPGRP:
* This symbol, if defined, indicates that setpgrp needs two
* arguments whereas USG one needs none. See also HAS_SETPGID
* for a POSIX interface.
*/
#$d_setpgrp HAS_SETPGRP /**/
#$d_bsdsetpgrp USE_BSD_SETPGRP /**/
/* STDCHAR:
* This symbol is defined to be the type of char used in stdio.h.
* It has the values "unsigned char" or "char".
*/
#define STDCHAR $stdchar /**/
/* HAS__FWALK:
* This symbol, if defined, indicates that the _fwalk system call is
* available to apply a function to all the file handles.
*/
#$d__fwalk HAS__FWALK /**/
/* FCNTL_CAN_LOCK:
* This symbol, if defined, indicates that fcntl() can be used
* for file locking. Normally on Unix systems this is defined.
* It may be undefined on VMS.
*/
#$d_fcntl_can_lock FCNTL_CAN_LOCK /**/
/* HAS_FSYNC:
* This symbol, if defined, indicates that the fsync routine is
* available to write a file's modified data and attributes to
* permanent storage.
*/
#$d_fsync HAS_FSYNC /**/
/* HAS_SBRK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the sbrk() function. Otherwise, it is up
* to the program to supply one. Good guesses are
* extern void* sbrk _((int));
* extern void* sbrk _((size_t));
*/
#$d_sbrkproto HAS_SBRK_PROTO /**/
#endif
!GROK!THIS!