651 lines
18 KiB
C
651 lines
18 KiB
C
/*
|
|
* Copyright (c) 1996, Sujal M. Patel
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $Id: pnp.c,v 1.8 1998/11/21 01:54:50 archie Exp $
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/linker_set.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/interrupt.h>
|
|
#include <machine/clock.h>
|
|
#include <machine/md_var.h>
|
|
|
|
#include <i386/isa/icu.h>
|
|
#include <i386/isa/isa_device.h>
|
|
#include <i386/isa/pnp.h>
|
|
|
|
typedef struct _pnp_id {
|
|
u_long vendor_id;
|
|
u_long serial;
|
|
u_char checksum;
|
|
u_long comp_id;
|
|
} pnp_id;
|
|
|
|
static int num_pnp_cards = 0;
|
|
pnp_id pnp_devices[MAX_PNP_CARDS];
|
|
struct pnp_dlist_node *pnp_device_list;
|
|
static struct pnp_dlist_node **pnp_device_list_last_ptr;
|
|
|
|
/*
|
|
* these entries are initialized using the autoconfig menu
|
|
* The struct is invalid (and must be initialized) if the first
|
|
* CSN is zero. The init code fills invalid entries with CSN 255
|
|
* which is not a supported value.
|
|
*/
|
|
|
|
struct pnp_cinfo pnp_ldn_overrides[MAX_PNP_LDN] = { { 0 } };
|
|
|
|
/*
|
|
* the following is a flag which tells if the data is valid.
|
|
*/
|
|
static int doing_pnp_probe = 0 ;
|
|
static int current_csn ;
|
|
static int current_pnp_id ;
|
|
static int current_pnp_serial ;
|
|
|
|
/*
|
|
* the following block is an example on what is needed for
|
|
* a PnP device driver.
|
|
*/
|
|
static char* nullpnp_probe(u_long csn, u_long vendor_id);
|
|
static void nullpnp_attach(u_long csn, u_long vendor_id, char *name,
|
|
struct isa_device *dev);
|
|
static u_long nullpnp_count = 0 ;
|
|
|
|
static struct pnp_device nullpnp_device = {
|
|
"goodpnp",
|
|
nullpnp_probe,
|
|
nullpnp_attach,
|
|
&nullpnp_count,
|
|
NULL /* imask */
|
|
};
|
|
|
|
DATA_SET (pnpdevice_set, nullpnp_device);
|
|
|
|
static char*
|
|
nullpnp_probe(u_long tag, u_long type)
|
|
{
|
|
if (bootverbose)
|
|
printf("Called nullpnp_probe with tag 0x%08lx, type 0x%08lx\n",
|
|
tag, type);
|
|
return NULL;
|
|
}
|
|
|
|
static void
|
|
nullpnp_attach(u_long csn, u_long vend_id, char *name,
|
|
struct isa_device *dev)
|
|
{
|
|
printf("nullpnp_attach: csn %ld, vend_id 0x%08lx name %s unit %d\n",
|
|
csn, vend_id, name, dev->id_unit);
|
|
return;
|
|
}
|
|
|
|
/* The READ_DATA port that we are using currently */
|
|
static int pnp_rd_port;
|
|
|
|
static void pnp_send_Initiation_LFSR (void);
|
|
static int pnp_get_serial (pnp_id *p);
|
|
static void config_pnp_device (pnp_id *p, int csn);
|
|
static int pnp_isolation_protocol (void);
|
|
|
|
void
|
|
pnp_write(int d, u_char r)
|
|
{
|
|
outb (_PNP_ADDRESS, d);
|
|
outb (_PNP_WRITE_DATA, r);
|
|
}
|
|
|
|
u_char
|
|
pnp_read(int d)
|
|
{
|
|
outb (_PNP_ADDRESS, d);
|
|
return (inb(3 | (pnp_rd_port <<2)));
|
|
}
|
|
|
|
/*
|
|
* Send Initiation LFSR as described in "Plug and Play ISA Specification",
|
|
* Intel May 94.
|
|
*/
|
|
static void
|
|
pnp_send_Initiation_LFSR()
|
|
{
|
|
int cur, i;
|
|
|
|
/* Reset the LSFR */
|
|
outb(_PNP_ADDRESS, 0);
|
|
outb(_PNP_ADDRESS, 0); /* yes, we do need it twice! */
|
|
|
|
cur = 0x6a;
|
|
outb(_PNP_ADDRESS, cur);
|
|
|
|
for (i = 1; i < 32; i++) {
|
|
cur = (cur >> 1) | (((cur ^ (cur >> 1)) << 7) & 0xff);
|
|
outb(_PNP_ADDRESS, cur);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Get the device's serial number. Returns 1 if the serial is valid.
|
|
*/
|
|
static int
|
|
pnp_get_serial(pnp_id *p)
|
|
{
|
|
int i, bit, valid = 0, sum = 0x6a;
|
|
u_char *data = (u_char *)p;
|
|
|
|
bzero(data, sizeof(char) * 9);
|
|
outb(_PNP_ADDRESS, SERIAL_ISOLATION);
|
|
for (i = 0; i < 72; i++) {
|
|
bit = inb((pnp_rd_port << 2) | 0x3) == 0x55;
|
|
DELAY(250); /* Delay 250 usec */
|
|
|
|
/* Can't Short Circuit the next evaluation, so 'and' is last */
|
|
bit = (inb((pnp_rd_port << 2) | 0x3) == 0xaa) && bit;
|
|
DELAY(250); /* Delay 250 usec */
|
|
|
|
valid = valid || bit;
|
|
|
|
if (i < 64)
|
|
sum = (sum >> 1) |
|
|
(((sum ^ (sum >> 1) ^ bit) << 7) & 0xff);
|
|
|
|
data[i / 8] = (data[i / 8] >> 1) | (bit ? 0x80 : 0);
|
|
}
|
|
|
|
valid = valid && (data[8] == sum);
|
|
|
|
return valid;
|
|
}
|
|
|
|
/*
|
|
* Fill's the buffer with resource info from the device.
|
|
* Returns 0 if the device fails to report
|
|
*/
|
|
static int
|
|
pnp_get_resource_info(u_char *buffer, int len)
|
|
{
|
|
int i, j;
|
|
u_char temp;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
outb(_PNP_ADDRESS, STATUS);
|
|
for (j = 0; j < 100; j++) {
|
|
if ((inb((pnp_rd_port << 2) | 0x3)) & 0x1)
|
|
break;
|
|
DELAY(1);
|
|
}
|
|
if (j == 100) {
|
|
printf("PnP device failed to report resource data\n");
|
|
return 0;
|
|
}
|
|
outb(_PNP_ADDRESS, RESOURCE_DATA);
|
|
temp = inb((pnp_rd_port << 2) | 0x3);
|
|
if (buffer != NULL)
|
|
buffer[i] = temp;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* read_pnp_parms loads pnp parameters from the currently selected
|
|
* device into the struct pnp_cinfo parameter passed.
|
|
* The second argument specifies the Logical Device to use.
|
|
*/
|
|
int
|
|
read_pnp_parms(struct pnp_cinfo *d, int ldn)
|
|
{
|
|
int i ;
|
|
|
|
if (doing_pnp_probe == 0 || d == NULL)
|
|
return 0 ; /* fail */
|
|
|
|
bzero(d, sizeof(struct pnp_cinfo));
|
|
d->vendor_id = current_pnp_id ;
|
|
d->serial = current_pnp_serial ;
|
|
|
|
d->csn = current_csn ;
|
|
d->ldn = ldn ; /* XXX this should be different ... */
|
|
pnp_write (SET_LDN, ldn );
|
|
i = pnp_read(SET_LDN) ;
|
|
if (i != ldn) {
|
|
printf("Warning: LDN %d does not exist\n", ldn);
|
|
}
|
|
for (i = 0; i < 8; i++) {
|
|
d->port[i] = pnp_read(IO_CONFIG_BASE + i * 2) << 8 ;
|
|
d->port[i] |= pnp_read(IO_CONFIG_BASE + i * 2 + 1);
|
|
|
|
if (i < 4) {
|
|
d->mem[i].base = pnp_read (MEM_CONFIG + i*8) << 16 ;
|
|
d->mem[i].base |= pnp_read (MEM_CONFIG + i*8 + 1) << 8 ;
|
|
d->mem[i].control = pnp_read (MEM_CONFIG + i*8 + 2) ;
|
|
d->mem[i].range = pnp_read (MEM_CONFIG + i*8 + 3) << 16 ;
|
|
d->mem[i].range |= pnp_read (MEM_CONFIG + i*8 + 4) << 8 ;
|
|
}
|
|
if (i < 2) {
|
|
d->irq[i] = pnp_read(IRQ_CONFIG + i * 2);
|
|
d->irq_type[i] = pnp_read(IRQ_CONFIG + 1 + i * 2);
|
|
d->drq[i] = pnp_read(DRQ_CONFIG + i);
|
|
}
|
|
}
|
|
d->enable = pnp_read(ACTIVATE);
|
|
for (i = 0 ; i < MAX_PNP_LDN; i++) {
|
|
if (pnp_ldn_overrides[i].csn == d->csn &&
|
|
pnp_ldn_overrides[i].ldn == ldn) {
|
|
d->flags = pnp_ldn_overrides[i].flags ;
|
|
d->override = pnp_ldn_overrides[i].override ;
|
|
break ;
|
|
}
|
|
}
|
|
if (bootverbose)
|
|
printf("port 0x%04x 0x%04x 0x%04x 0x%04x irq %d:%d drq %d:%d en %d\n",
|
|
d->port[0], d->port[1], d->port[2], d->port[3],
|
|
d->irq[0], d->irq[1],
|
|
d->drq[0], d->drq[1],
|
|
d->enable);
|
|
return 1 ; /* success */
|
|
}
|
|
|
|
/*
|
|
* write_pnp_parms initializes a logical device with the parms
|
|
* in d, and then activates the board if the last parameter is 1.
|
|
*/
|
|
|
|
int
|
|
write_pnp_parms(struct pnp_cinfo *d, int ldn)
|
|
{
|
|
int i, empty = -1 ;
|
|
|
|
/*
|
|
* some safety checks first.
|
|
*/
|
|
if (doing_pnp_probe == 0 || d==NULL || d->vendor_id != current_pnp_id)
|
|
return 0 ; /* fail */
|
|
|
|
pnp_write (SET_LDN, ldn );
|
|
i = pnp_read(SET_LDN) ;
|
|
if (i != ldn) {
|
|
printf("Warning: LDN %d does not exist\n", ldn);
|
|
}
|
|
for (i = 0; i < 8; i++) {
|
|
pnp_write(IO_CONFIG_BASE + i * 2, d->port[i] >> 8 );
|
|
pnp_write(IO_CONFIG_BASE + i * 2 + 1, d->port[i] & 0xff );
|
|
}
|
|
for (i = 0; i < 4; i++) {
|
|
pnp_write(MEM_CONFIG + i*8, (d->mem[i].base >> 16) & 0xff );
|
|
pnp_write(MEM_CONFIG + i*8+1, (d->mem[i].base >> 8) & 0xff );
|
|
pnp_write(MEM_CONFIG + i*8+2, d->mem[i].control & 0xff );
|
|
pnp_write(MEM_CONFIG + i*8+3, (d->mem[i].range >> 16) & 0xff );
|
|
pnp_write(MEM_CONFIG + i*8+4, (d->mem[i].range >> 8) & 0xff );
|
|
}
|
|
for (i = 0; i < 2; i++) {
|
|
pnp_write(IRQ_CONFIG + i*2 , d->irq[i] );
|
|
pnp_write(IRQ_CONFIG + i*2 + 1, d->irq_type[i] );
|
|
pnp_write(DRQ_CONFIG + i, d->drq[i] );
|
|
}
|
|
/*
|
|
* store parameters read into the current kernel
|
|
* so manual editing next time is easier
|
|
*/
|
|
for (i = 0 ; i < MAX_PNP_LDN; i++) {
|
|
if (pnp_ldn_overrides[i].csn == d->csn &&
|
|
pnp_ldn_overrides[i].ldn == ldn) {
|
|
d->flags = pnp_ldn_overrides[i].flags ;
|
|
pnp_ldn_overrides[i] = *d ;
|
|
break ;
|
|
} else if (pnp_ldn_overrides[i].csn < 1 ||
|
|
pnp_ldn_overrides[i].csn == 255)
|
|
empty = i ;
|
|
}
|
|
if (i== MAX_PNP_LDN && empty != -1)
|
|
pnp_ldn_overrides[empty] = *d;
|
|
|
|
/*
|
|
* Here should really perform the range check, and
|
|
* return a failure if not successful.
|
|
*/
|
|
pnp_write (IO_RANGE_CHECK, 0);
|
|
DELAY(1000); /* XXX is it really necessary ? */
|
|
pnp_write (ACTIVATE, d->enable ? 1 : 0);
|
|
DELAY(1000); /* XXX is it really necessary ? */
|
|
return 1 ;
|
|
}
|
|
|
|
/*
|
|
* To finalize a card's initialization, and before accessing its
|
|
* registers, we need to bring the card in WaitForKey. To this purpose,
|
|
* we need to issue a WaitForKey command, which brings _all_ cards
|
|
* in that state. So, before configuring the next board, we must also
|
|
* sent the Init-Key to bring cards to the SLEEP state again.
|
|
*
|
|
* In fact, one could hope that cards respond to normal I/O accesses
|
|
* even in the SLEEP state, which could be done by issuing a WAKE[0].
|
|
* This seems to work on the CS4236, but not on the CS4232 on my Zappa
|
|
* motherboard .
|
|
*/
|
|
int
|
|
enable_pnp_card()
|
|
{
|
|
/* the next wake should bring the card in WaitForKey ? */
|
|
pnp_write (WAKE, 0);
|
|
pnp_write(CONFIG_CONTROL, 0x02); /* All cards in WaitForKey */
|
|
DELAY(1000); /* XXX is it really necessary ? */
|
|
return 1 ; /* success */
|
|
}
|
|
|
|
/*
|
|
* Configure PnP devices. pnp_id is made of:
|
|
* 4 bytes: board id (which can be printed as an ascii string);
|
|
* 4 bytes: board serial number (often 0 or -1 ?)
|
|
*/
|
|
|
|
static void
|
|
config_pnp_device(pnp_id *p, int csn)
|
|
{
|
|
static struct pnp_dlist_node *nod = NULL;
|
|
int i;
|
|
u_char *data = (u_char *)p;
|
|
u_char *comp = (u_char *)&p->comp_id;
|
|
|
|
/* these are for autoconfigure a-la pci */
|
|
struct pnp_device *dvp, **dvpp;
|
|
char *name = NULL;
|
|
|
|
printf("CSN %d Vendor ID: %c%c%c%02x%02x [0x%08lx] Serial 0x%08lx Comp ID: %c%c%c%02x%02x [0x%08lx]\n",
|
|
csn,
|
|
((data[0] & 0x7c) >> 2) + '@',
|
|
(((data[0] & 0x03) << 3) | ((data[1] & 0xe0) >> 5)) + '@',
|
|
(data[1] & 0x1f) + '@', data[2], data[3],
|
|
p->vendor_id, p->serial,
|
|
((comp[0] & 0x7c) >> 2) + '@',
|
|
(((comp[0] & 0x03) << 3) | ((comp[1] & 0xe0) >> 5)) + '@',
|
|
(comp[1] & 0x1f) + '@', comp[2], comp[3],
|
|
p->comp_id);
|
|
|
|
doing_pnp_probe = 1 ;
|
|
current_csn = csn ;
|
|
current_pnp_id = p->vendor_id ;
|
|
current_pnp_serial = p->serial ;
|
|
|
|
/*
|
|
* use kernel table to override possible devices
|
|
*/
|
|
for (i = 0 ; i < MAX_PNP_LDN; i++) {
|
|
if (pnp_ldn_overrides[i].csn == csn &&
|
|
pnp_ldn_overrides[i].override == 1) {
|
|
struct pnp_cinfo d;
|
|
if (bootverbose)
|
|
printf("PnP: override config for CSN %d LDN %d "
|
|
"vend_id 0x%08x\n", csn, pnp_ldn_overrides[i].ldn,
|
|
current_pnp_id);
|
|
/* next assignement is done otherwise read fails */
|
|
d.vendor_id = current_pnp_id ;
|
|
read_pnp_parms(&d, pnp_ldn_overrides[i].ldn);
|
|
if (pnp_ldn_overrides[i].enable == 0) {
|
|
/* just disable ... */
|
|
d.enable = 0;
|
|
write_pnp_parms(&d, pnp_ldn_overrides[i].ldn);
|
|
} else {
|
|
/* set all parameters */
|
|
/* next assignement is done otherwise write fails */
|
|
pnp_ldn_overrides[i].vendor_id = current_pnp_id ;
|
|
write_pnp_parms(&pnp_ldn_overrides[i],
|
|
pnp_ldn_overrides[i].ldn);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* lookup device in ioconfiguration */
|
|
dvpp = (struct pnp_device **)pnpdevice_set.ls_items;
|
|
while ((dvp = *dvpp++)) {
|
|
if (dvp->pd_probe) {
|
|
if ( ((name = (*dvp->pd_probe)(csn, p->vendor_id)) && *name) ||
|
|
(p->comp_id &&
|
|
(name = (*dvp->pd_probe)(csn, p->comp_id))))
|
|
break;
|
|
}
|
|
}
|
|
if (dvp && name && *name && dvp->pd_count) { /* found a matching device */
|
|
int unit ;
|
|
|
|
/* pnpcb->pnpcb_seen |= ( 1ul << csn ) ; */
|
|
|
|
/* get and increment the unit */
|
|
unit = (*dvp->pd_count)++;
|
|
|
|
/*
|
|
* now call the attach routine. The board has not been
|
|
* configured yet, so better not access isa registers in
|
|
* the attach routine until enable_pnp_card() has been done.
|
|
*/
|
|
|
|
if (nod == NULL)
|
|
nod = malloc(sizeof(struct pnp_dlist_node), M_DEVBUF, M_NOWAIT);
|
|
if (nod == NULL)
|
|
panic("malloc failed for PnP resource use");
|
|
bzero(nod, sizeof(*nod));
|
|
nod->pnp = dvp;
|
|
nod->dev.id_unit = unit ;
|
|
if (dvp->pd_attach)
|
|
(*dvp->pd_attach) (csn, p->vendor_id, name, &(nod->dev));
|
|
printf("%s%d (%s <%s> sn 0x%08lx)", nod->dev.id_driver &&
|
|
nod->dev.id_driver->name ? nod->dev.id_driver->name : "unknown",
|
|
unit, dvp->pd_name, name, p->serial);
|
|
if (nod->dev.id_alive) {
|
|
if (nod->dev.id_irq != 0 && nod->dev.id_intr != NULL) {
|
|
/* the board uses interrupts. Register it. */
|
|
if (dvp->imask)
|
|
INTRMASK( *(dvp->imask), nod->dev.id_irq );
|
|
register_intr(ffs(nod->dev.id_irq) - 1, nod->dev.id_id,
|
|
nod->dev.id_ri_flags, nod->dev.id_intr,
|
|
dvp->imask, nod->dev.id_unit);
|
|
INTREN(nod->dev.id_irq);
|
|
}
|
|
if (nod->dev.id_alive != 0) {
|
|
if (nod->dev.id_iobase == -1)
|
|
printf(" at ?");
|
|
else {
|
|
printf(" at 0x%x", nod->dev.id_iobase);
|
|
if ((nod->dev.id_iobase + nod->dev.id_alive -1) !=
|
|
nod->dev.id_iobase) {
|
|
printf("-0x%x", nod->dev.id_iobase + nod->dev.id_alive
|
|
- 1);
|
|
}
|
|
}
|
|
}
|
|
if (nod->dev.id_irq)
|
|
printf(" irq %d", ffs(nod->dev.id_irq) - 1);
|
|
if (nod->dev.id_drq != -1)
|
|
printf(" drq %d", nod->dev.id_drq);
|
|
if (nod->dev.id_maddr)
|
|
printf(" maddr 0x%lx", kvtop(nod->dev.id_maddr));
|
|
if (nod->dev.id_msize)
|
|
printf(" msize %d", nod->dev.id_msize);
|
|
if (nod->dev.id_flags)
|
|
printf(" flags 0x%x", nod->dev.id_flags);
|
|
if (nod->dev.id_iobase && !(nod->dev.id_iobase & 0xf300)) {
|
|
printf(" on motherboard");
|
|
printf(" id %d", nod->dev.id_id);
|
|
} else if (nod->dev.id_iobase >= 0x1000 &&
|
|
!(nod->dev.id_iobase & 0x300)) {
|
|
printf (" on eisa slot %d",
|
|
nod->dev.id_iobase >> 12);
|
|
} else {
|
|
printf (" on isa");
|
|
}
|
|
printf("\n");
|
|
if (pnp_device_list_last_ptr == NULL)
|
|
pnp_device_list = nod;
|
|
else
|
|
*pnp_device_list_last_ptr = nod;
|
|
pnp_device_list_last_ptr = &(nod->next);
|
|
nod = NULL;
|
|
} else
|
|
printf(" failed to attach\n");
|
|
}
|
|
doing_pnp_probe = 0 ;
|
|
}
|
|
|
|
/*
|
|
* Scan Resource Data for Compatible Device ID.
|
|
*
|
|
* This function exits as soon as it gets a Compatible Device ID, an error
|
|
* reading *ANY* Resource Data or ir reaches the end of Resource Data.
|
|
* In the first case the return value will be TRUE, FALSE otherwise.
|
|
*/
|
|
static int
|
|
pnp_scan_resdata(pnp_id *p, int csn)
|
|
{
|
|
u_char tag, resinfo[8];
|
|
int large_len, scanning = 1024, retval = FALSE;
|
|
|
|
while (scanning-- > 0 && pnp_get_resource_info(&tag, 1)) {
|
|
if (PNP_RES_TYPE(tag) == 0) {
|
|
/* Small resource */
|
|
switch (PNP_SRES_NUM(tag)) {
|
|
case COMP_DEVICE_ID:
|
|
/* Got a compatible device id resource */
|
|
if (pnp_get_resource_info(resinfo, PNP_SRES_LEN(tag))) {
|
|
bcopy(resinfo, &p->comp_id, 4);
|
|
retval = TRUE;
|
|
if (bootverbose)
|
|
printf("PnP: CSN %d COMP_DEVICE_ID = 0x%08lx\n", csn, p->comp_id);
|
|
}
|
|
/*
|
|
* We found what we were looking for, or got an error from
|
|
* pnp_get_resource, => stop scanning (FALLTHROUGH)
|
|
*/
|
|
case END_TAG:
|
|
scanning = 0;
|
|
break;
|
|
default:
|
|
/* Skip this resource */
|
|
if (pnp_get_resource_info(NULL, PNP_SRES_LEN(tag)) == 0)
|
|
scanning = 0;
|
|
break;
|
|
}
|
|
} else
|
|
/* Large resource, skip it */
|
|
if (!(pnp_get_resource_info((u_char *)&large_len, 2) && pnp_get_resource_info(NULL, large_len)))
|
|
scanning = 0;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Run the isolation protocol. Use pnp_rd_port as the READ_DATA port
|
|
* value (caller should try multiple READ_DATA locations before giving
|
|
* up). Upon exiting, all cards are aware that they should use
|
|
* pnp_rd_port as the READ_DATA port.
|
|
*
|
|
* In the first pass, a csn is assigned to each board and pnp_id's
|
|
* are saved to an array, pnp_devices. In the second pass, each
|
|
* card is woken up and the device configuration is called.
|
|
*/
|
|
static int
|
|
pnp_isolation_protocol()
|
|
{
|
|
int csn;
|
|
|
|
pnp_send_Initiation_LFSR();
|
|
|
|
pnp_write(CONFIG_CONTROL, 0x04); /* Reset CSN for All Cards */
|
|
|
|
for (csn = 1; (csn < MAX_PNP_CARDS); csn++) {
|
|
/* Wake up cards without a CSN */
|
|
pnp_write(WAKE, 0);
|
|
pnp_write(SET_RD_DATA, pnp_rd_port);
|
|
outb(_PNP_ADDRESS, SERIAL_ISOLATION);
|
|
DELAY(1000); /* Delay 1 msec */
|
|
|
|
if (pnp_get_serial( &(pnp_devices[csn-1]) ) ) {
|
|
pnp_write(SET_CSN, csn);
|
|
/* pnp_write(CONFIG_CONTROL, 2); */
|
|
if (!pnp_scan_resdata(&(pnp_devices[csn-1]), csn))
|
|
pnp_devices[csn-1].comp_id = NULL;
|
|
} else
|
|
break;
|
|
}
|
|
num_pnp_cards = csn - 1;
|
|
for (csn = 1; csn <= num_pnp_cards ; csn++) {
|
|
/*
|
|
* make sure cards are in SLEEP state
|
|
*/
|
|
pnp_send_Initiation_LFSR();
|
|
pnp_write(WAKE, csn);
|
|
config_pnp_device( &(pnp_devices[csn-1]), csn);
|
|
/*
|
|
* Put all cards in WaitForKey, just in case the previous
|
|
* attach routine forgot it.
|
|
*/
|
|
pnp_write(CONFIG_CONTROL, 0x02);
|
|
DELAY(1000); /* XXX is it really necessary ? */
|
|
}
|
|
return num_pnp_cards ;
|
|
}
|
|
|
|
|
|
/*
|
|
* pnp_configure()
|
|
*
|
|
* autoconfiguration of pnp devices. This routine just runs the
|
|
* isolation protocol over several ports, until one is successful.
|
|
*
|
|
* may be called more than once ?
|
|
*
|
|
*/
|
|
|
|
void
|
|
pnp_configure()
|
|
{
|
|
int num_pnp_devs;
|
|
|
|
if (pnp_ldn_overrides[0].csn == 0) {
|
|
if (bootverbose)
|
|
printf("Initializing PnP override table\n");
|
|
bzero (pnp_ldn_overrides, sizeof(pnp_ldn_overrides));
|
|
pnp_ldn_overrides[0].csn = 255 ;
|
|
}
|
|
printf("Probing for PnP devices:\n");
|
|
|
|
/* Try various READ_DATA ports from 0x203-0x3ff */
|
|
for (pnp_rd_port = 0x80; (pnp_rd_port < 0xff); pnp_rd_port += 0x10) {
|
|
if (bootverbose)
|
|
printf("Trying Read_Port at %x\n", (pnp_rd_port << 2) | 0x3);
|
|
|
|
num_pnp_devs = pnp_isolation_protocol();
|
|
if (num_pnp_devs)
|
|
break;
|
|
}
|
|
if (!num_pnp_devs) {
|
|
if (bootverbose)
|
|
printf("No Plug-n-Play devices were found\n");
|
|
return;
|
|
}
|
|
}
|