d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fea8a20d19
freebsd-dev/sys/contrib/dev/ath/ath_hal/ar9300/ar9300.h
Adrian Chadd d5c3e61afb Expose the ANI state / statistics using the public ANI function, rather than 
the ar9300_* definitions.

.. which of course don't match, and athstats was reading garbage ANI
data.
2015-04-01 04:56:10 +00:00

1721 lines
73 KiB
C
Raw Blame History

/*
* Copyright (c) 2013 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _ATH_AR9300_H_
#define _ATH_AR9300_H_
#include "ar9300_freebsd_inc.h"
#define AH_BIG_ENDIAN 4321
#define AH_LITTLE_ENDIAN 1234
#if _BYTE_ORDER == _BIG_ENDIAN
#define AH_BYTE_ORDER AH_BIG_ENDIAN
#else
#define AH_BYTE_ORDER AH_LITTLE_ENDIAN
#endif
/* XXX doesn't belong here */
#define AR_EEPROM_MODAL_SPURS 5
/*
* (a) this should be N(a),
* (b) FreeBSD does define nitems,
* (c) it doesn't have an AH_ prefix, sigh.
*/
#define ARRAY_LENGTH(a) (sizeof(a) / sizeof((a)[0]))
#include "ah_internal.h"
#include "ah_eeprom.h"
#include "ah_devid.h"
#include "ar9300eep.h" /* For Eeprom definitions */
#define AR9300_MAGIC 0x19741014
/* MAC register values */
#define INIT_CONFIG_STATUS 0x00000000
#define INIT_RSSI_THR 0x7 /* Missed beacon counter initialized to 0x7 (max is 0xff) */
#define INIT_RSSI_BEACON_WEIGHT 8 /* ave beacon rssi weight (0-16) */
/*
* Various fifo fill before Tx start, in 64-byte units
* i.e. put the frame in the air while still DMAing
*/
#define MIN_TX_FIFO_THRESHOLD 0x1
#define MAX_TX_FIFO_THRESHOLD (( 4096 / 64) - 1)
#define INIT_TX_FIFO_THRESHOLD MIN_TX_FIFO_THRESHOLD
#define CHANSEL_DIV 15
#define FCLK 40
#define COEFF ((FCLK * 5) / 2)
#define CHANSEL_2G(_freq) (((_freq) * 0x10000) / CHANSEL_DIV)
#define CHANSEL_5G(_freq) (((_freq) * 0x8000) / CHANSEL_DIV)
#define CHANSEL_5G_DOT5MHZ 2188
/*
* Receive Queue Fifo depth.
*/
enum RX_FIFO_DEPTH {
HAL_HP_RXFIFO_DEPTH = 16,
HAL_LP_RXFIFO_DEPTH = 128,
};
/*
* Gain support.
*/
#define NUM_CORNER_FIX_BITS_2133 7
#define CCK_OFDM_GAIN_DELTA 15
enum GAIN_PARAMS {
GP_TXCLIP,
GP_PD90,
GP_PD84,
GP_GSEL
};
enum GAIN_PARAMS_2133 {
GP_MIXGAIN_OVR,
GP_PWD_138,
GP_PWD_137,
GP_PWD_136,
GP_PWD_132,
GP_PWD_131,
GP_PWD_130,
};
enum {
HAL_RESET_POWER_ON,
HAL_RESET_WARM,
HAL_RESET_COLD,
};
typedef struct _gain_opt_step {
int16_t paramVal[NUM_CORNER_FIX_BITS_2133];
int32_t stepGain;
int8_t stepName[16];
} GAIN_OPTIMIZATION_STEP;
typedef struct {
u_int32_t numStepsInLadder;
u_int32_t defaultStepNum;
GAIN_OPTIMIZATION_STEP optStep[10];
} GAIN_OPTIMIZATION_LADDER;
typedef struct {
u_int32_t currStepNum;
u_int32_t currGain;
u_int32_t targetGain;
u_int32_t loTrig;
u_int32_t hiTrig;
u_int32_t gainFCorrection;
u_int32_t active;
GAIN_OPTIMIZATION_STEP *curr_step;
} GAIN_VALUES;
typedef struct {
u_int16_t synth_center;
u_int16_t ctl_center;
u_int16_t ext_center;
} CHAN_CENTERS;
/* RF HAL structures */
typedef struct rf_hal_funcs {
HAL_BOOL (*set_channel)(struct ath_hal *, struct ieee80211_channel *);
HAL_BOOL (*get_chip_power_lim)(struct ath_hal *ah,
struct ieee80211_channel *chan);
} RF_HAL_FUNCS;
struct ar9300_ani_default {
u_int16_t m1_thresh_low;
u_int16_t m2_thresh_low;
u_int16_t m1_thresh;
u_int16_t m2_thresh;
u_int16_t m2_count_thr;
u_int16_t m2_count_thr_low;
u_int16_t m1_thresh_low_ext;
u_int16_t m2_thresh_low_ext;
u_int16_t m1_thresh_ext;
u_int16_t m2_thresh_ext;
u_int16_t firstep;
u_int16_t firstep_low;
u_int16_t cycpwr_thr1;
u_int16_t cycpwr_thr1_ext;
};
/*
* Per-channel ANI state private to the driver.
*/
struct ar9300_ani_state {
struct ieee80211_channel c; /* XXX ew? */
HAL_BOOL must_restore;
HAL_BOOL ofdms_turn;
u_int8_t ofdm_noise_immunity_level;
u_int8_t cck_noise_immunity_level;
u_int8_t spur_immunity_level;
u_int8_t firstep_level;
u_int8_t ofdm_weak_sig_detect_off;
u_int8_t mrc_cck_off;
/* Thresholds */
u_int32_t listen_time;
u_int32_t ofdm_trig_high;
u_int32_t ofdm_trig_low;
int32_t cck_trig_high;
int32_t cck_trig_low;
int32_t rssi_thr_low;
int32_t rssi_thr_high;
int32_t rssi; /* The current RSSI */
u_int32_t tx_frame_count; /* Last tx_frame_count */
u_int32_t rx_frame_count; /* Last rx Frame count */
u_int32_t rx_busy_count; /* Last rx busy count */
u_int32_t rx_ext_busy_count; /* Last rx busy count; extension channel */
u_int32_t cycle_count; /* Last cycle_count (can detect wrap-around) */
u_int32_t ofdm_phy_err_count;/* OFDM err count since last reset */
u_int32_t cck_phy_err_count; /* CCK err count since last reset */
struct ar9300_ani_default ini_def; /* INI default values for ANI registers */
HAL_BOOL phy_noise_spur; /* based on OFDM/CCK Phy errors */
};
#define AR9300_ANI_POLLINTERVAL 1000 /* 1000 milliseconds between ANI poll */
#define AR9300_CHANNEL_SWITCH_TIME_USEC 1000 /* 1 millisecond needed to change channels */
#define HAL_PROCESS_ANI 0x00000001 /* ANI state setup */
#define HAL_RADAR_EN 0x80000000 /* Radar detect is capable */
#define HAL_AR_EN 0x40000000 /* AR detect is capable */
#define DO_ANI(ah) \
((AH9300(ah)->ah_proc_phy_err & HAL_PROCESS_ANI))
#if 0
struct ar9300_stats {
u_int32_t ast_ani_niup; /* ANI increased noise immunity */
u_int32_t ast_ani_nidown; /* ANI decreased noise immunity */
u_int32_t ast_ani_spurup; /* ANI increased spur immunity */
u_int32_t ast_ani_spurdown;/* ANI descreased spur immunity */
u_int32_t ast_ani_ofdmon; /* ANI OFDM weak signal detect on */
u_int32_t ast_ani_ofdmoff;/* ANI OFDM weak signal detect off */
u_int32_t ast_ani_cckhigh;/* ANI CCK weak signal threshold high */
u_int32_t ast_ani_ccklow; /* ANI CCK weak signal threshold low */
u_int32_t ast_ani_stepup; /* ANI increased first step level */
u_int32_t ast_ani_stepdown;/* ANI decreased first step level */
u_int32_t ast_ani_ofdmerrs;/* ANI cumulative ofdm phy err count */
u_int32_t ast_ani_cckerrs;/* ANI cumulative cck phy err count */
u_int32_t ast_ani_reset; /* ANI parameters zero'd for non-STA */
u_int32_t ast_ani_lzero; /* ANI listen time forced to zero */
u_int32_t ast_ani_lneg; /* ANI listen time calculated < 0 */
HAL_MIB_STATS ast_mibstats; /* MIB counter stats */
HAL_NODE_STATS ast_nodestats; /* Latest rssi stats from driver */
};
#endif
struct ar9300_rad_reader {
u_int16_t rd_index;
u_int16_t rd_expSeq;
u_int32_t rd_resetVal;
u_int8_t rd_start;
};
struct ar9300_rad_writer {
u_int16_t wr_index;
u_int16_t wr_seq;
};
struct ar9300_radar_event {
u_int32_t re_ts; /* 32 bit time stamp */
u_int8_t re_rssi; /* rssi of radar event */
u_int8_t re_dur; /* duration of radar pulse */
u_int8_t re_chanIndex; /* Channel of event */
};
struct ar9300_radar_q_elem {
u_int32_t rq_seqNum;
u_int32_t rq_busy; /* 32 bit to insure atomic read/write */
struct ar9300_radar_event rq_event; /* Radar event */
};
struct ar9300_radar_q_info {
u_int16_t ri_qsize; /* q size */
u_int16_t ri_seqSize; /* Size of sequence ring */
struct ar9300_rad_reader ri_reader; /* State for the q reader */
struct ar9300_rad_writer ri_writer; /* state for the q writer */
};
#define HAL_MAX_ACK_RADAR_DUR 511
#define HAL_MAX_NUM_PEAKS 3
#define HAL_ARQ_SIZE 4096 /* 8K AR events for buffer size */
#define HAL_ARQ_SEQSIZE 4097 /* Sequence counter wrap for AR */
#define HAL_RADARQ_SIZE 1024 /* 1K radar events for buffer size */
#define HAL_RADARQ_SEQSIZE 1025 /* Sequence counter wrap for radar */
#define HAL_NUMRADAR_STATES 64 /* Number of radar channels we keep state for */
struct ar9300_ar_state {
u_int16_t ar_prev_time_stamp;
u_int32_t ar_prev_width;
u_int32_t ar_phy_err_count[HAL_MAX_ACK_RADAR_DUR];
u_int32_t ar_ack_sum;
u_int16_t ar_peak_list[HAL_MAX_NUM_PEAKS];
u_int32_t ar_packet_threshold; /* Thresh to determine traffic load */
u_int32_t ar_par_threshold; /* Thresh to determine peak */
u_int32_t ar_radar_rssi; /* Rssi threshold for AR event */
};
struct ar9300_radar_state {
struct ieee80211_channel *rs_chan; /* Channel info */
u_int8_t rs_chan_index; /* Channel index in radar structure */
u_int32_t rs_num_radar_events; /* Number of radar events */
int32_t rs_firpwr; /* Thresh to check radar sig is gone */
u_int32_t rs_radar_rssi; /* Thresh to start radar det (dB) */
u_int32_t rs_height; /* Thresh for pulse height (dB)*/
u_int32_t rs_pulse_rssi; /* Thresh to check if pulse is gone (dB) */
u_int32_t rs_inband; /* Thresh to check if pusle is inband (0.5 dB) */
};
typedef struct {
u_int8_t uc_receiver_errors;
u_int8_t uc_bad_tlp_errors;
u_int8_t uc_bad_dllp_errors;
u_int8_t uc_replay_timeout_errors;
u_int8_t uc_replay_number_rollover_errors;
} ar_pcie_error_moniter_counters;
#define AR9300_OPFLAGS_11A 0x01 /* if set, allow 11a */
#define AR9300_OPFLAGS_11G 0x02 /* if set, allow 11g */
#define AR9300_OPFLAGS_N_5G_HT40 0x04 /* if set, disable 5G HT40 */
#define AR9300_OPFLAGS_N_2G_HT40 0x08 /* if set, disable 2G HT40 */
#define AR9300_OPFLAGS_N_5G_HT20 0x10 /* if set, disable 5G HT20 */
#define AR9300_OPFLAGS_N_2G_HT20 0x20 /* if set, disable 2G HT20 */
/*
* For Kite and later chipsets, the following bits are not being programmed in EEPROM
* and so need to be enabled always.
* Bit 0: en_fcc_mid, Bit 1: en_jap_mid, Bit 2: en_fcc_dfs_ht40
* Bit 3: en_jap_ht40, Bit 4: en_jap_dfs_ht40
*/
#define AR9300_RDEXT_DEFAULT 0x1F
#define AR9300_MAX_CHAINS 3
#define AR9300_NUM_CHAINS(chainmask) \
(((chainmask >> 2) & 1) + ((chainmask >> 1) & 1) + (chainmask & 1))
#define AR9300_CHAIN0_MASK 0x1
#define AR9300_CHAIN1_MASK 0x2
#define AR9300_CHAIN2_MASK 0x4
/* Support for multiple INIs */
struct ar9300_ini_array {
const u_int32_t *ia_array;
u_int32_t ia_rows;
u_int32_t ia_columns;
};
#define INIT_INI_ARRAY(iniarray, array, rows, columns) do { \
(iniarray)->ia_array = (const u_int32_t *)(array); \
(iniarray)->ia_rows = (rows); \
(iniarray)->ia_columns = (columns); \
} while (0)
#define INI_RA(iniarray, row, column) (((iniarray)->ia_array)[(row) * ((iniarray)->ia_columns) + (column)])
#define INIT_CAL(_perCal) \
(_perCal)->cal_state = CAL_WAITING; \
(_perCal)->cal_next = AH_NULL;
#define INSERT_CAL(_ahp, _perCal) \
do { \
if ((_ahp)->ah_cal_list_last == AH_NULL) { \
(_ahp)->ah_cal_list = (_ahp)->ah_cal_list_last = (_perCal); \
((_ahp)->ah_cal_list_last)->cal_next = (_perCal); \
} else { \
((_ahp)->ah_cal_list_last)->cal_next = (_perCal); \
(_ahp)->ah_cal_list_last = (_perCal); \
(_perCal)->cal_next = (_ahp)->ah_cal_list; \
} \
} while (0)
typedef enum cal_types {
IQ_MISMATCH_CAL = 0x1,
TEMP_COMP_CAL = 0x2,
} HAL_CAL_TYPES;
typedef enum cal_state {
CAL_INACTIVE,
CAL_WAITING,
CAL_RUNNING,
CAL_DONE
} HAL_CAL_STATE; /* Calibrate state */
#define MIN_CAL_SAMPLES 1
#define MAX_CAL_SAMPLES 64
#define INIT_LOG_COUNT 5
#define PER_MIN_LOG_COUNT 2
#define PER_MAX_LOG_COUNT 10
#define AR9300_NUM_BT_WEIGHTS 4
#define AR9300_NUM_WLAN_WEIGHTS 4
/* Per Calibration data structure */
typedef struct per_cal_data {
HAL_CAL_TYPES cal_type; // Type of calibration
u_int32_t cal_num_samples; // Number of SW samples to collect
u_int32_t cal_count_max; // Number of HW samples to collect
void (*cal_collect)(struct ath_hal *, u_int8_t); // Accumulator func
void (*cal_post_proc)(struct ath_hal *, u_int8_t); // Post-processing func
} HAL_PERCAL_DATA;
/* List structure for calibration data */
typedef struct cal_list {
const HAL_PERCAL_DATA *cal_data;
HAL_CAL_STATE cal_state;
struct cal_list *cal_next;
} HAL_CAL_LIST;
#define AR9300_NUM_CAL_TYPES 2
#define AR9300_PAPRD_TABLE_SZ 24
#define AR9300_PAPRD_GAIN_TABLE_SZ 32
#define AR9382_MAX_GPIO_PIN_NUM (16)
#define AR9382_GPIO_PIN_8_RESERVED (8)
#define AR9382_GPIO_9_INPUT_ONLY (9)
#define AR9382_MAX_GPIO_INPUT_PIN_NUM (13)
#define AR9382_GPIO_PIN_11_RESERVED (11)
#define AR9382_MAX_JTAG_GPIO_PIN_NUM (3)
/* Paprd tx power adjust data structure */
struct ar9300_paprd_pwr_adjust {
u_int32_t target_rate; // rate index
u_int32_t reg_addr; // register offset
u_int32_t reg_mask; // mask of register
u_int32_t reg_mask_offset; // mask offset of register
u_int32_t sub_db; // offset value unit of dB
};
struct ar9300NfLimits {
int16_t max;
int16_t min;
int16_t nominal;
};
#define AR9300_MAX_RATES 36 /* legacy(4) + ofdm(8) + HTSS(8) + HTDS(8) + HTTS(8)*/
struct ath_hal_9300 {
struct ath_hal_private ah_priv; /* base class */
/*
* Information retrieved from EEPROM.
*/
ar9300_eeprom_t ah_eeprom;
GAIN_VALUES ah_gain_values;
u_int8_t ah_macaddr[IEEE80211_ADDR_LEN];
u_int8_t ah_bssid[IEEE80211_ADDR_LEN];
u_int8_t ah_bssid_mask[IEEE80211_ADDR_LEN];
u_int16_t ah_assoc_id;
/*
* Runtime state.
*/
u_int32_t ah_mask_reg; /* copy of AR_IMR */
u_int32_t ah_mask2Reg; /* copy of AR_IMR_S2 */
u_int32_t ah_msi_reg; /* copy of AR_PCIE_MSI */
os_atomic_t ah_ier_ref_count; /* reference count for enabling interrupts */
HAL_ANI_STATS ah_stats; /* various statistics */
RF_HAL_FUNCS ah_rf_hal;
u_int32_t ah_tx_desc_mask; /* mask for TXDESC */
u_int32_t ah_tx_ok_interrupt_mask;
u_int32_t ah_tx_err_interrupt_mask;
u_int32_t ah_tx_desc_interrupt_mask;
u_int32_t ah_tx_eol_interrupt_mask;
u_int32_t ah_tx_urn_interrupt_mask;
HAL_TX_QUEUE_INFO ah_txq[HAL_NUM_TX_QUEUES];
HAL_SMPS_MODE ah_sm_power_mode;
HAL_BOOL ah_chip_full_sleep;
u_int32_t ah_atim_window;
HAL_ANT_SETTING ah_diversity_control; /* antenna setting */
u_int16_t ah_antenna_switch_swap; /* Controls mapping of OID request */
u_int8_t ah_tx_chainmask_cfg; /* chain mask config */
u_int8_t ah_rx_chainmask_cfg;
u_int32_t ah_beacon_rssi_threshold; /* cache beacon rssi threshold */
/* Calibration related fields */
HAL_CAL_TYPES ah_supp_cals;
HAL_CAL_LIST ah_iq_cal_data; /* IQ Cal Data */
HAL_CAL_LIST ah_temp_comp_cal_data; /* Temperature Compensation Cal Data */
HAL_CAL_LIST *ah_cal_list; /* ptr to first cal in list */
HAL_CAL_LIST *ah_cal_list_last; /* ptr to last cal in list */
HAL_CAL_LIST *ah_cal_list_curr; /* ptr to current cal */
// IQ Cal aliases
#define ah_total_power_meas_i ah_meas0.unsign
#define ah_total_power_meas_q ah_meas1.unsign
#define ah_total_iq_corr_meas ah_meas2.sign
union {
u_int32_t unsign[AR9300_MAX_CHAINS];
int32_t sign[AR9300_MAX_CHAINS];
} ah_meas0;
union {
u_int32_t unsign[AR9300_MAX_CHAINS];
int32_t sign[AR9300_MAX_CHAINS];
} ah_meas1;
union {
u_int32_t unsign[AR9300_MAX_CHAINS];
int32_t sign[AR9300_MAX_CHAINS];
} ah_meas2;
union {
u_int32_t unsign[AR9300_MAX_CHAINS];
int32_t sign[AR9300_MAX_CHAINS];
} ah_meas3;
u_int16_t ah_cal_samples;
/* end - Calibration related fields */
u_int32_t ah_tx6_power_in_half_dbm; /* power output for 6Mb tx */
u_int32_t ah_sta_id1_defaults; /* STA_ID1 default settings */
u_int32_t ah_misc_mode; /* MISC_MODE settings */
HAL_BOOL ah_get_plcp_hdr; /* setting about MISC_SEL_EVM */
enum {
AUTO_32KHZ, /* use it if 32kHz crystal present */
USE_32KHZ, /* do it regardless */
DONT_USE_32KHZ, /* don't use it regardless */
} ah_enable32k_hz_clock; /* whether to sleep at 32kHz */
u_int32_t ah_ofdm_tx_power;
int16_t ah_tx_power_index_offset;
u_int ah_slot_time; /* user-specified slot time */
u_int ah_ack_timeout; /* user-specified ack timeout */
/*
* XXX
* 11g-specific stuff; belongs in the driver.
*/
u_int8_t ah_g_beacon_rate; /* fixed rate for G beacons */
u_int32_t ah_gpio_mask; /* copy of enabled GPIO mask */
u_int32_t ah_gpio_cause; /* copy of GPIO cause (sync and async) */
/*
* RF Silent handling; setup according to the EEPROM.
*/
u_int32_t ah_gpio_select; /* GPIO pin to use */
u_int32_t ah_polarity; /* polarity to disable RF */
u_int32_t ah_gpio_bit; /* after init, prev value */
HAL_BOOL ah_eep_enabled; /* EEPROM bit for capability */
#ifdef ATH_BT_COEX
/*
* Bluetooth coexistence static setup according to the registry
*/
HAL_BT_MODULE ah_bt_module; /* Bluetooth module identifier */
u_int8_t ah_bt_coex_config_type; /* BT coex configuration */
u_int8_t ah_bt_active_gpio_select; /* GPIO pin for BT_ACTIVE */
u_int8_t ah_bt_priority_gpio_select; /* GPIO pin for BT_PRIORITY */
u_int8_t ah_wlan_active_gpio_select; /* GPIO pin for WLAN_ACTIVE */
u_int8_t ah_bt_active_polarity; /* Polarity of BT_ACTIVE */
HAL_BOOL ah_bt_coex_single_ant; /* Single or dual antenna configuration */
u_int8_t ah_bt_wlan_isolation; /* Isolation between BT and WLAN in dB */
/*
* Bluetooth coexistence runtime settings
*/
HAL_BOOL ah_bt_coex_enabled; /* If Bluetooth coexistence is enabled */
u_int32_t ah_bt_coex_mode; /* Register setting for AR_BT_COEX_MODE */
u_int32_t ah_bt_coex_bt_weight[AR9300_NUM_BT_WEIGHTS]; /* Register setting for AR_BT_COEX_WEIGHT */
u_int32_t ah_bt_coex_wlan_weight[AR9300_NUM_WLAN_WEIGHTS]; /* Register setting for AR_BT_COEX_WEIGHT */
u_int32_t ah_bt_coex_mode2; /* Register setting for AR_BT_COEX_MODE2 */
u_int32_t ah_bt_coex_flag; /* Special tuning flags for BT coex */
#endif
/*
* Generic timer support
*/
u_int32_t ah_avail_gen_timers; /* mask of available timers */
u_int32_t ah_intr_gen_timer_trigger; /* generic timer trigger interrupt state */
u_int32_t ah_intr_gen_timer_thresh; /* generic timer trigger interrupt state */
HAL_BOOL ah_enable_tsf2; /* enable TSF2 for gen timer 8-15. */
/*
* ANI & Radar support.
*/
u_int32_t ah_proc_phy_err; /* Process Phy errs */
u_int32_t ah_ani_period; /* ani update list period */
struct ar9300_ani_state *ah_curani; /* cached last reference */
struct ar9300_ani_state ah_ani[255]; /* per-channel state */
struct ar9300_radar_state ah_radar[HAL_NUMRADAR_STATES]; /* Per-Channel Radar detector state */
struct ar9300_radar_q_elem *ah_radarq; /* radar event queue */
struct ar9300_radar_q_info ah_radarq_info; /* radar event q read/write state */
struct ar9300_ar_state ah_ar; /* AR detector state */
struct ar9300_radar_q_elem *ah_arq; /* AR event queue */
struct ar9300_radar_q_info ah_arq_info; /* AR event q read/write state */
/*
* Transmit power state. Note these are maintained
* here so they can be retrieved by diagnostic tools.
*/
u_int16_t ah_rates_array[16];
/*
* Tx queue interrupt state.
*/
u_int32_t ah_intr_txqs;
HAL_BOOL ah_intr_mitigation_rx; /* rx Interrupt Mitigation Settings */
HAL_BOOL ah_intr_mitigation_tx; /* tx Interrupt Mitigation Settings */
/*
* Extension Channel Rx Clear State
*/
u_int32_t ah_cycle_count;
u_int32_t ah_ctl_busy;
u_int32_t ah_ext_busy;
/* HT CWM state */
HAL_HT_EXTPROTSPACING ah_ext_prot_spacing;
u_int8_t ah_tx_chainmask; /* tx chain mask */
u_int8_t ah_rx_chainmask; /* rx chain mask */
/* optional tx chainmask */
u_int8_t ah_tx_chainmaskopt;
u_int8_t ah_tx_cal_chainmask; /* tx cal chain mask */
u_int8_t ah_rx_cal_chainmask; /* rx cal chain mask */
int ah_hwp;
void *ah_cal_mem;
HAL_BOOL ah_emu_eeprom;
HAL_ANI_CMD ah_ani_function;
HAL_BOOL ah_rifs_enabled;
u_int32_t ah_rifs_reg[11];
u_int32_t ah_rifs_sec_cnt;
/* open-loop power control */
u_int32_t original_gain[22];
int32_t init_pdadc;
int32_t pdadc_delta;
/* cycle counts for beacon stuck diagnostics */
u_int32_t ah_cycles;
u_int32_t ah_rx_clear;
u_int32_t ah_rx_frame;
u_int32_t ah_tx_frame;
#define BB_HANG_SIG1 0
#define BB_HANG_SIG2 1
#define BB_HANG_SIG3 2
#define BB_HANG_SIG4 3
#define MAC_HANG_SIG1 4
#define MAC_HANG_SIG2 5
/* bb hang detection */
int ah_hang[6];
hal_hw_hangs_t ah_hang_wars;
/*
* Keytable type table
*/
#define AR_KEYTABLE_SIZE 128 /* XXX! */
uint8_t ah_keytype[AR_KEYTABLE_SIZE];
#undef AR_KEYTABLE_SIZE
/*
* Support for ar9300 multiple INIs
*/
struct ar9300_ini_array ah_ini_pcie_serdes;
struct ar9300_ini_array ah_ini_pcie_serdes_low_power;
struct ar9300_ini_array ah_ini_modes_additional;
struct ar9300_ini_array ah_ini_modes_additional_40mhz;
struct ar9300_ini_array ah_ini_modes_rxgain;
struct ar9300_ini_array ah_ini_modes_rxgain_bounds;
struct ar9300_ini_array ah_ini_modes_txgain;
struct ar9300_ini_array ah_ini_japan2484;
struct ar9300_ini_array ah_ini_radio_post_sys2ant;
struct ar9300_ini_array ah_ini_BTCOEX_MAX_TXPWR;
/*
* New INI format starting with Osprey 2.0 INI.
* Pre, core, post arrays for each sub-system (mac, bb, radio, soc)
*/
#define ATH_INI_PRE 0
#define ATH_INI_CORE 1
#define ATH_INI_POST 2
#define ATH_INI_NUM_SPLIT (ATH_INI_POST + 1)
struct ar9300_ini_array ah_ini_mac[ATH_INI_NUM_SPLIT]; /* New INI format */
struct ar9300_ini_array ah_ini_bb[ATH_INI_NUM_SPLIT]; /* New INI format */
struct ar9300_ini_array ah_ini_radio[ATH_INI_NUM_SPLIT]; /* New INI format */
struct ar9300_ini_array ah_ini_soc[ATH_INI_NUM_SPLIT]; /* New INI format */
/*
* Added to support DFS postamble array in INI that we need to apply
* in DFS channels
*/
struct ar9300_ini_array ah_ini_dfs;
#if ATH_WOW
struct ar9300_ini_array ah_ini_pcie_serdes_wow; /* SerDes values during WOW sleep */
#endif
/* To indicate EEPROM mapping used */
u_int32_t ah_immunity_vals[6];
HAL_BOOL ah_immunity_on;
/*
* snap shot of counter register for debug purposes
*/
#ifdef AH_DEBUG
u_int32_t last_tf;
u_int32_t last_rf;
u_int32_t last_rc;
u_int32_t last_cc;
#endif
HAL_BOOL ah_dma_stuck; /* Set to AH_TRUE when RX/TX DMA failed to stop. */
u_int32_t nf_tsf32; /* timestamp for NF calibration duration */
u_int32_t reg_dmn; /* Regulatory Domain */
int16_t twice_antenna_gain; /* Antenna Gain */
u_int16_t twice_antenna_reduction; /* Antenna Gain Allowed */
/*
* Upper limit after factoring in the regulatory max, antenna gain and
* multichain factor. No TxBF, CDD or STBC gain factored
*/
int16_t upper_limit[AR9300_MAX_CHAINS];
/* adjusted power for descriptor-based TPC for 1, 2, or 3 chains */
int16_t txpower[AR9300_MAX_RATES][AR9300_MAX_CHAINS];
/* adjusted power for descriptor-based TPC for 1, 2, or 3 chains with STBC*/
int16_t txpower_stbc[AR9300_MAX_RATES][AR9300_MAX_CHAINS];
/* Transmit Status ring support */
struct ar9300_txs *ts_ring;
u_int16_t ts_tail;
u_int16_t ts_size;
u_int32_t ts_paddr_start;
u_int32_t ts_paddr_end;
/* Receive Buffer size */
#define HAL_RXBUFSIZE_DEFAULT 0xfff
u_int16_t rx_buf_size;
u_int32_t ah_wa_reg_val; // Store the permanent value of Reg 0x4004 so we dont have to R/M/W. (We should not be reading this register when in sleep states).
/* Indicate the PLL source clock rate is 25Mhz or not.
* clk_25mhz = 0 by default.
*/
u_int8_t clk_25mhz;
/* For PAPRD uses */
u_int16_t small_signal_gain[AH_MAX_CHAINS];
u_int32_t pa_table[AH_MAX_CHAINS][AR9300_PAPRD_TABLE_SZ];
u_int32_t paprd_gain_table_entries[AR9300_PAPRD_GAIN_TABLE_SZ];
u_int32_t paprd_gain_table_index[AR9300_PAPRD_GAIN_TABLE_SZ];
u_int32_t ah_2g_paprd_rate_mask_ht20; /* Copy of eep->modal_header_2g.paprd_rate_mask_ht20 */
u_int32_t ah_2g_paprd_rate_mask_ht40; /* Copy of eep->modal_header_2g.paprd_rate_mask_ht40 */
u_int32_t ah_5g_paprd_rate_mask_ht20; /* Copy of eep->modal_header_5g.paprd_rate_mask_ht20 */
u_int32_t ah_5g_paprd_rate_mask_ht40; /* Copy of eep->modal_header_5g.paprd_rate_mask_ht40 */
u_int32_t paprd_training_power;
/* For GreenTx use to store the default tx power */
u_int8_t ah_default_tx_power[ar9300_rate_size];
HAL_BOOL ah_paprd_broken;
/* To store offsets of host interface registers */
struct {
u_int32_t AR_RC;
u_int32_t AR_WA;
u_int32_t AR_PM_STATE;
u_int32_t AR_H_INFOL;
u_int32_t AR_H_INFOH;
u_int32_t AR_PCIE_PM_CTRL;
u_int32_t AR_HOST_TIMEOUT;
u_int32_t AR_EEPROM;
u_int32_t AR_SREV;
u_int32_t AR_INTR_SYNC_CAUSE;
u_int32_t AR_INTR_SYNC_CAUSE_CLR;
u_int32_t AR_INTR_SYNC_ENABLE;
u_int32_t AR_INTR_ASYNC_MASK;
u_int32_t AR_INTR_SYNC_MASK;
u_int32_t AR_INTR_ASYNC_CAUSE_CLR;
u_int32_t AR_INTR_ASYNC_CAUSE;
u_int32_t AR_INTR_ASYNC_ENABLE;
u_int32_t AR_PCIE_SERDES;
u_int32_t AR_PCIE_SERDES2;
u_int32_t AR_GPIO_OUT;
u_int32_t AR_GPIO_IN;
u_int32_t AR_GPIO_OE_OUT;
u_int32_t AR_GPIO_OE1_OUT;
u_int32_t AR_GPIO_INTR_POL;
u_int32_t AR_GPIO_INPUT_EN_VAL;
u_int32_t AR_GPIO_INPUT_MUX1;
u_int32_t AR_GPIO_INPUT_MUX2;
u_int32_t AR_GPIO_OUTPUT_MUX1;
u_int32_t AR_GPIO_OUTPUT_MUX2;
u_int32_t AR_GPIO_OUTPUT_MUX3;
u_int32_t AR_INPUT_STATE;
u_int32_t AR_SPARE;
u_int32_t AR_PCIE_CORE_RESET_EN;
u_int32_t AR_CLKRUN;
u_int32_t AR_EEPROM_STATUS_DATA;
u_int32_t AR_OBS;
u_int32_t AR_RFSILENT;
u_int32_t AR_GPIO_PDPU;
u_int32_t AR_GPIO_DS;
u_int32_t AR_MISC;
u_int32_t AR_PCIE_MSI;
u_int32_t AR_TSF_SNAPSHOT_BT_ACTIVE;
u_int32_t AR_TSF_SNAPSHOT_BT_PRIORITY;
u_int32_t AR_TSF_SNAPSHOT_BT_CNTL;
u_int32_t AR_PCIE_PHY_LATENCY_NFTS_ADJ;
u_int32_t AR_TDMA_CCA_CNTL;
u_int32_t AR_TXAPSYNC;
u_int32_t AR_TXSYNC_INIT_SYNC_TMR;
u_int32_t AR_INTR_PRIO_SYNC_CAUSE;
u_int32_t AR_INTR_PRIO_SYNC_ENABLE;
u_int32_t AR_INTR_PRIO_ASYNC_MASK;
u_int32_t AR_INTR_PRIO_SYNC_MASK;
u_int32_t AR_INTR_PRIO_ASYNC_CAUSE;
u_int32_t AR_INTR_PRIO_ASYNC_ENABLE;
} ah_hostifregs;
u_int32_t ah_enterprise_mode;
u_int32_t ah_radar1;
u_int32_t ah_dc_offset;
HAL_BOOL ah_hw_green_tx_enable; /* 1:enalbe H/W Green Tx */
HAL_BOOL ah_smartantenna_enable; /* 1:enalbe H/W */
u_int32_t ah_disable_cck;
HAL_BOOL ah_lna_div_use_bt_ant_enable; /* 1:enable Rx(LNA) Diversity */
/*
* Different types of memory where the calibration data might be stored.
* All types are searched in Ar9300EepromRestore() in the order flash, eeprom, otp.
* To disable searching a type, set its parameter to 0.
*/
int try_dram;
int try_flash;
int try_eeprom;
int try_otp;
#ifdef ATH_CAL_NAND_FLASH
int try_nand;
#endif
/*
* This is where we found the calibration data.
*/
int calibration_data_source;
int calibration_data_source_address;
/*
* This is where we look for the calibration data. must be set before ath_attach() is called
*/
int calibration_data_try;
int calibration_data_try_address;
u_int8_t
tx_iq_cal_enable : 1,
tx_iq_cal_during_agc_cal : 1,
tx_cl_cal_enable : 1;
#if ATH_SUPPORT_MCI
/* For MCI */
HAL_BOOL ah_mci_ready;
u_int32_t ah_mci_int_raw;
u_int32_t ah_mci_int_rx_msg;
u_int32_t ah_mci_rx_status;
u_int32_t ah_mci_cont_status;
u_int8_t ah_mci_bt_state;
u_int32_t ah_mci_gpm_addr;
u_int8_t *ah_mci_gpm_buf;
u_int32_t ah_mci_gpm_len;
u_int32_t ah_mci_gpm_idx;
u_int32_t ah_mci_sched_addr;
u_int8_t *ah_mci_sched_buf;
u_int8_t ah_mci_coex_major_version_wlan;
u_int8_t ah_mci_coex_minor_version_wlan;
u_int8_t ah_mci_coex_major_version_bt;
u_int8_t ah_mci_coex_minor_version_bt;
HAL_BOOL ah_mci_coex_bt_version_known;
HAL_BOOL ah_mci_coex_wlan_channels_update;
u_int32_t ah_mci_coex_wlan_channels[4];
HAL_BOOL ah_mci_coex_2g5g_update;
HAL_BOOL ah_mci_coex_is_2g;
HAL_BOOL ah_mci_query_bt;
HAL_BOOL ah_mci_unhalt_bt_gpm; /* need send UNHALT */
HAL_BOOL ah_mci_halted_bt_gpm; /* HALT sent */
HAL_BOOL ah_mci_need_flush_btinfo;
HAL_BOOL ah_mci_concur_tx_en;
u_int8_t ah_mci_stomp_low_tx_pri;
u_int8_t ah_mci_stomp_all_tx_pri;
u_int8_t ah_mci_stomp_none_tx_pri;
u_int32_t ah_mci_wlan_cal_seq;
u_int32_t ah_mci_wlan_cal_done;
#if ATH_SUPPORT_AIC
HAL_BOOL ah_aic_enabled;
u_int32_t ah_aic_sram[ATH_AIC_MAX_BT_CHANNEL];
#endif
#endif /* ATH_SUPPORT_MCI */
u_int8_t ah_cac_quiet_enabled;
#if ATH_WOW_OFFLOAD
u_int32_t ah_mcast_filter_l32_set;
u_int32_t ah_mcast_filter_u32_set;
#endif
HAL_BOOL ah_reduced_self_gen_mask;
HAL_BOOL ah_chip_reset_done;
HAL_BOOL ah_abort_txdma_norx;
/* store previous passive RX Cal info */
HAL_BOOL ah_skip_rx_iq_cal;
HAL_BOOL ah_rx_cal_complete; /* previous rx cal completed or not */
u_int32_t ah_rx_cal_chan; /* chan on which rx cal is done */
u_int32_t ah_rx_cal_chan_flag;
u_int32_t ah_rx_cal_corr[AR9300_MAX_CHAINS];
/* Local additions for FreeBSD */
/*
* These fields are in the top level HAL in the atheros
* codebase; here we place them in the AR9300 HAL and
* access them via accessor methods if the driver requires them.
*/
u_int32_t ah_ob_db1[3];
u_int32_t ah_db2[3];
u_int32_t ah_bb_panic_timeout_ms;
u_int32_t ah_bb_panic_last_status;
u_int32_t ah_tx_trig_level;
u_int16_t ath_hal_spur_chans[AR_EEPROM_MODAL_SPURS][2];
int16_t nf_cw_int_delta; /* diff btwn nominal NF and CW interf threshold */
int ah_phyrestart_disabled;
HAL_RSSI_TX_POWER green_tx_status;
int green_ap_ps_on;
int ah_enable_keysearch_always;
int ah_fccaifs;
int ah_reset_reason;
int ah_dcs_enable;
HAL_ANI_STATE ext_ani_state; /* FreeBSD; external facing ANI state */
struct ar9300NfLimits nf_2GHz;
struct ar9300NfLimits nf_5GHz;
struct ar9300NfLimits *nfp;
};
#define AH9300(_ah) ((struct ath_hal_9300 *)(_ah))
#define IS_9300_EMU(ah) \
(AH_PRIVATE(ah)->ah_devid == AR9300_DEVID_EMU_PCIE)
#define ar9300_eep_data_in_flash(_ah) \
(!(AH_PRIVATE(_ah)->ah_flags & AH_USE_EEPROM))
#ifdef notyet
// Need these additional conditions for IS_5GHZ_FAST_CLOCK_EN when we have valid eeprom contents.
&& \
((ar9300_eeprom_get(AH9300(_ah), EEP_MINOR_REV) <= AR9300_EEP_MINOR_VER_16) || \
(ar9300_eeprom_get(AH9300(_ah), EEP_FSTCLK_5G))))
#endif
/*
* WAR for bug 6773. OS_DELAY() does a PIO READ on the PCI bus which allows
* other cards' DMA reads to complete in the middle of our reset.
*/
#define WAR_6773(x) do { \
if ((++(x) % 64) == 0) \
OS_DELAY(1); \
} while (0)
#define REG_WRITE_ARRAY(iniarray, column, regWr) do { \
int r; \
for (r = 0; r < ((iniarray)->ia_rows); r++) { \
OS_REG_WRITE(ah, INI_RA((iniarray), (r), 0), INI_RA((iniarray), r, (column)));\
WAR_6773(regWr); \
} \
} while (0)
#define UPPER_5G_SUB_BANDSTART 5700
#define MID_5G_SUB_BANDSTART 5400
#define TRAINPOWER_DB_OFFSET 6
#define AH_PAPRD_GET_SCALE_FACTOR(_scale, _eep, _is2G, _channel) do{ if(_is2G) { _scale = (_eep->modal_header_2g.paprd_rate_mask_ht20>>25)&0x7; \
} else { \
if(_channel >= UPPER_5G_SUB_BANDSTART){ _scale = (_eep->modal_header_5g.paprd_rate_mask_ht20>>25)&0x7;} \
else if((UPPER_5G_SUB_BANDSTART < _channel) && (_channel >= MID_5G_SUB_BANDSTART)) \
{ _scale = (_eep->modal_header_5g.paprd_rate_mask_ht40>>28)&0x7;} \
else { _scale = (_eep->modal_header_5g.paprd_rate_mask_ht40>>25)&0x7;} } }while(0)
#ifdef AH_ASSERT
#define ar9300FeatureNotSupported(feature, ah, func) \
ath_hal_printf(ah, # feature \
" not supported but called from %s\n", (func)), \
hal_assert(0)
#else
#define ar9300FeatureNotSupported(feature, ah, func) \
ath_hal_printf(ah, # feature \
" not supported but called from %s\n", (func))
#endif /* AH_ASSERT */
/*
* Green Tx, Based on different RSSI of Received Beacon thresholds,
* using different tx power by modified register tx power related values.
* The thresholds are decided by system team.
*/
#define WB225_SW_GREEN_TX_THRES1_DB 56 /* in dB */
#define WB225_SW_GREEN_TX_THRES2_DB 41 /* in dB */
#define WB225_OB_CALIBRATION_VALUE 5 /* For Green Tx OLPC Delta
Calibration Offset */
#define WB225_OB_GREEN_TX_SHORT_VALUE 1 /* For Green Tx OB value
in short distance*/
#define WB225_OB_GREEN_TX_MIDDLE_VALUE 3 /* For Green Tx OB value
in middle distance */
#define WB225_OB_GREEN_TX_LONG_VALUE 5 /* For Green Tx OB value
in long distance */
#define WB225_BBPWRTXRATE9_SW_GREEN_TX_SHORT_VALUE 0x06060606 /* For SwGreen Tx
BB_powertx_rate9 reg
value in short
distance */
#define WB225_BBPWRTXRATE9_SW_GREEN_TX_MIDDLE_VALUE 0x0E0E0E0E /* For SwGreen Tx
BB_powertx_rate9 reg
value in middle
distance */
/* Tx power for short distacnce in SwGreenTx.*/
static const u_int8_t wb225_sw_gtx_tp_distance_short[ar9300_rate_size] = {
6, /*ALL_TARGET_LEGACY_6_24*/
6, /*ALL_TARGET_LEGACY_36*/
6, /*ALL_TARGET_LEGACY_48*/
4, /*ALL_TARGET_LEGACY_54*/
6, /*ALL_TARGET_LEGACY_1L_5L*/
6, /*ALL_TARGET_LEGACY_5S*/
6, /*ALL_TARGET_LEGACY_11L*/
6, /*ALL_TARGET_LEGACY_11S*/
6, /*ALL_TARGET_HT20_0_8_16*/
6, /*ALL_TARGET_HT20_1_3_9_11_17_19*/
4, /*ALL_TARGET_HT20_4*/
4, /*ALL_TARGET_HT20_5*/
4, /*ALL_TARGET_HT20_6*/
2, /*ALL_TARGET_HT20_7*/
0, /*ALL_TARGET_HT20_12*/
0, /*ALL_TARGET_HT20_13*/
0, /*ALL_TARGET_HT20_14*/
0, /*ALL_TARGET_HT20_15*/
0, /*ALL_TARGET_HT20_20*/
0, /*ALL_TARGET_HT20_21*/
0, /*ALL_TARGET_HT20_22*/
0, /*ALL_TARGET_HT20_23*/
6, /*ALL_TARGET_HT40_0_8_16*/
6, /*ALL_TARGET_HT40_1_3_9_11_17_19*/
4, /*ALL_TARGET_HT40_4*/
4, /*ALL_TARGET_HT40_5*/
4, /*ALL_TARGET_HT40_6*/
2, /*ALL_TARGET_HT40_7*/
0, /*ALL_TARGET_HT40_12*/
0, /*ALL_TARGET_HT40_13*/
0, /*ALL_TARGET_HT40_14*/
0, /*ALL_TARGET_HT40_15*/
0, /*ALL_TARGET_HT40_20*/
0, /*ALL_TARGET_HT40_21*/
0, /*ALL_TARGET_HT40_22*/
0 /*ALL_TARGET_HT40_23*/
};
/* Tx power for middle distacnce in SwGreenTx.*/
static const u_int8_t wb225_sw_gtx_tp_distance_middle[ar9300_rate_size] = {
14, /*ALL_TARGET_LEGACY_6_24*/
14, /*ALL_TARGET_LEGACY_36*/
14, /*ALL_TARGET_LEGACY_48*/
12, /*ALL_TARGET_LEGACY_54*/
14, /*ALL_TARGET_LEGACY_1L_5L*/
14, /*ALL_TARGET_LEGACY_5S*/
14, /*ALL_TARGET_LEGACY_11L*/
14, /*ALL_TARGET_LEGACY_11S*/
14, /*ALL_TARGET_HT20_0_8_16*/
14, /*ALL_TARGET_HT20_1_3_9_11_17_19*/
14, /*ALL_TARGET_HT20_4*/
14, /*ALL_TARGET_HT20_5*/
12, /*ALL_TARGET_HT20_6*/
10, /*ALL_TARGET_HT20_7*/
0, /*ALL_TARGET_HT20_12*/
0, /*ALL_TARGET_HT20_13*/
0, /*ALL_TARGET_HT20_14*/
0, /*ALL_TARGET_HT20_15*/
0, /*ALL_TARGET_HT20_20*/
0, /*ALL_TARGET_HT20_21*/
0, /*ALL_TARGET_HT20_22*/
0, /*ALL_TARGET_HT20_23*/
14, /*ALL_TARGET_HT40_0_8_16*/
14, /*ALL_TARGET_HT40_1_3_9_11_17_19*/
14, /*ALL_TARGET_HT40_4*/
14, /*ALL_TARGET_HT40_5*/
12, /*ALL_TARGET_HT40_6*/
10, /*ALL_TARGET_HT40_7*/
0, /*ALL_TARGET_HT40_12*/
0, /*ALL_TARGET_HT40_13*/
0, /*ALL_TARGET_HT40_14*/
0, /*ALL_TARGET_HT40_15*/
0, /*ALL_TARGET_HT40_20*/
0, /*ALL_TARGET_HT40_21*/
0, /*ALL_TARGET_HT40_22*/
0 /*ALL_TARGET_HT40_23*/
};
/* OLPC DeltaCalibration Offset unit in half dB.*/
static const u_int8_t wb225_gtx_olpc_cal_offset[6] = {
0, /* OB0*/
16, /* OB1*/
9, /* OB2*/
5, /* OB3*/
2, /* OB4*/
0, /* OB5*/
};
/*
* Definitions for HwGreenTx
*/
#define AR9485_HW_GREEN_TX_THRES1_DB 56 /* in dB */
#define AR9485_HW_GREEN_TX_THRES2_DB 41 /* in dB */
#define AR9485_BBPWRTXRATE9_HW_GREEN_TX_SHORT_VALUE 0x0C0C0A0A /* For HwGreen Tx
BB_powertx_rate9 reg
value in short
distance */
#define AR9485_BBPWRTXRATE9_HW_GREEN_TX_MIDDLE_VALUE 0x10100E0E /* For HwGreenTx
BB_powertx_rate9 reg
value in middle
distance */
/* Tx power for short distacnce in HwGreenTx.*/
static const u_int8_t ar9485_hw_gtx_tp_distance_short[ar9300_rate_size] = {
14, /*ALL_TARGET_LEGACY_6_24*/
14, /*ALL_TARGET_LEGACY_36*/
8, /*ALL_TARGET_LEGACY_48*/
2, /*ALL_TARGET_LEGACY_54*/
14, /*ALL_TARGET_LEGACY_1L_5L*/
14, /*ALL_TARGET_LEGACY_5S*/
14, /*ALL_TARGET_LEGACY_11L*/
14, /*ALL_TARGET_LEGACY_11S*/
12, /*ALL_TARGET_HT20_0_8_16*/
12, /*ALL_TARGET_HT20_1_3_9_11_17_19*/
12, /*ALL_TARGET_HT20_4*/
12, /*ALL_TARGET_HT20_5*/
8, /*ALL_TARGET_HT20_6*/
2, /*ALL_TARGET_HT20_7*/
0, /*ALL_TARGET_HT20_12*/
0, /*ALL_TARGET_HT20_13*/
0, /*ALL_TARGET_HT20_14*/
0, /*ALL_TARGET_HT20_15*/
0, /*ALL_TARGET_HT20_20*/
0, /*ALL_TARGET_HT20_21*/
0, /*ALL_TARGET_HT20_22*/
0, /*ALL_TARGET_HT20_23*/
10, /*ALL_TARGET_HT40_0_8_16*/
10, /*ALL_TARGET_HT40_1_3_9_11_17_19*/
10, /*ALL_TARGET_HT40_4*/
10, /*ALL_TARGET_HT40_5*/
6, /*ALL_TARGET_HT40_6*/
2, /*ALL_TARGET_HT40_7*/
0, /*ALL_TARGET_HT40_12*/
0, /*ALL_TARGET_HT40_13*/
0, /*ALL_TARGET_HT40_14*/
0, /*ALL_TARGET_HT40_15*/
0, /*ALL_TARGET_HT40_20*/
0, /*ALL_TARGET_HT40_21*/
0, /*ALL_TARGET_HT40_22*/
0 /*ALL_TARGET_HT40_23*/
};
/* Tx power for middle distacnce in HwGreenTx.*/
static const u_int8_t ar9485_hw_gtx_tp_distance_middle[ar9300_rate_size] = {
18, /*ALL_TARGET_LEGACY_6_24*/
18, /*ALL_TARGET_LEGACY_36*/
14, /*ALL_TARGET_LEGACY_48*/
12, /*ALL_TARGET_LEGACY_54*/
18, /*ALL_TARGET_LEGACY_1L_5L*/
18, /*ALL_TARGET_LEGACY_5S*/
18, /*ALL_TARGET_LEGACY_11L*/
18, /*ALL_TARGET_LEGACY_11S*/
16, /*ALL_TARGET_HT20_0_8_16*/
16, /*ALL_TARGET_HT20_1_3_9_11_17_19*/
16, /*ALL_TARGET_HT20_4*/
16, /*ALL_TARGET_HT20_5*/
14, /*ALL_TARGET_HT20_6*/
12, /*ALL_TARGET_HT20_7*/
0, /*ALL_TARGET_HT20_12*/
0, /*ALL_TARGET_HT20_13*/
0, /*ALL_TARGET_HT20_14*/
0, /*ALL_TARGET_HT20_15*/
0, /*ALL_TARGET_HT20_20*/
0, /*ALL_TARGET_HT20_21*/
0, /*ALL_TARGET_HT20_22*/
0, /*ALL_TARGET_HT20_23*/
14, /*ALL_TARGET_HT40_0_8_16*/
14, /*ALL_TARGET_HT40_1_3_9_11_17_19*/
14, /*ALL_TARGET_HT40_4*/
14, /*ALL_TARGET_HT40_5*/
14, /*ALL_TARGET_HT40_6*/
12, /*ALL_TARGET_HT40_7*/
0, /*ALL_TARGET_HT40_12*/
0, /*ALL_TARGET_HT40_13*/
0, /*ALL_TARGET_HT40_14*/
0, /*ALL_TARGET_HT40_15*/
0, /*ALL_TARGET_HT40_20*/
0, /*ALL_TARGET_HT40_21*/
0, /*ALL_TARGET_HT40_22*/
0 /*ALL_TARGET_HT40_23*/
};
/* MIMO Modes used in TPC calculations */
typedef enum {
AR9300_DEF_MODE = 0, /* Could be CDD or Direct */
AR9300_TXBF_MODE,
AR9300_STBC_MODE
} AR9300_TXMODES;
typedef enum {
POSEIDON_STORED_REG_OBDB = 0, /* default OB/DB setting from ini */
POSEIDON_STORED_REG_TPC = 1, /* default txpower value in TPC reg */
POSEIDON_STORED_REG_BB_PWRTX_RATE9 = 2, /* default txpower value in
* BB_powertx_rate9 reg
*/
POSEIDON_STORED_REG_SZ /* Can not add anymore */
} POSEIDON_STORED_REGS;
typedef enum {
POSEIDON_STORED_REG_G2_OLPC_OFFSET = 0,/* default OB/DB setting from ini */
POSEIDON_STORED_REG_G2_SZ /* should not exceed 3 */
} POSEIDON_STORED_REGS_G2;
#if AH_NEED_TX_DATA_SWAP
#if AH_NEED_RX_DATA_SWAP
#define ar9300_init_cfg_reg(ah) OS_REG_RMW(ah, AR_CFG, AR_CFG_SWTB | AR_CFG_SWRB,0)
#else
#define ar9300_init_cfg_reg(ah) OS_REG_RMW(ah, AR_CFG, AR_CFG_SWTB,0)
#endif
#elif AH_NEED_RX_DATA_SWAP
#define ar9300_init_cfg_reg(ah) OS_REG_RMW(ah, AR_CFG, AR_CFG_SWRB,0)
#else
#define ar9300_init_cfg_reg(ah) OS_REG_RMW(ah, AR_CFG, AR_CFG_SWTD | AR_CFG_SWRD,0)
#endif
extern HAL_BOOL ar9300_rf_attach(struct ath_hal *, HAL_STATUS *);
struct ath_hal;
extern struct ath_hal_9300 * ar9300_new_state(u_int16_t devid,
HAL_SOFTC sc, HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata,
HAL_OPS_CONFIG *ah_config,
HAL_STATUS *status);
extern struct ath_hal * ar9300_attach(u_int16_t devid,
HAL_SOFTC sc, HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata,
HAL_OPS_CONFIG *ah_config, HAL_STATUS *status);
extern void ar9300_detach(struct ath_hal *ah);
extern void ar9300_read_revisions(struct ath_hal *ah);
extern HAL_BOOL ar9300_chip_test(struct ath_hal *ah);
extern HAL_BOOL ar9300_get_channel_edges(struct ath_hal *ah,
u_int16_t flags, u_int16_t *low, u_int16_t *high);
extern HAL_BOOL ar9300_fill_capability_info(struct ath_hal *ah);
extern void ar9300_beacon_init(struct ath_hal *ah,
u_int32_t next_beacon, u_int32_t beacon_period,
u_int32_t beacon_period_fraction, HAL_OPMODE opmode);
extern void ar9300_set_sta_beacon_timers(struct ath_hal *ah,
const HAL_BEACON_STATE *);
extern HAL_BOOL ar9300_is_interrupt_pending(struct ath_hal *ah);
extern HAL_BOOL ar9300_get_pending_interrupts(struct ath_hal *ah, HAL_INT *, HAL_INT_TYPE, u_int8_t, HAL_BOOL);
extern HAL_INT ar9300_get_interrupts(struct ath_hal *ah);
extern HAL_INT ar9300_set_interrupts(struct ath_hal *ah, HAL_INT ints, HAL_BOOL);
extern void ar9300_set_intr_mitigation_timer(struct ath_hal* ah,
HAL_INT_MITIGATION reg, u_int32_t value);
extern u_int32_t ar9300_get_intr_mitigation_timer(struct ath_hal* ah,
HAL_INT_MITIGATION reg);
extern u_int32_t ar9300_get_key_cache_size(struct ath_hal *);
extern HAL_BOOL ar9300_is_key_cache_entry_valid(struct ath_hal *, u_int16_t entry);
extern HAL_BOOL ar9300_reset_key_cache_entry(struct ath_hal *ah, u_int16_t entry);
extern HAL_CHANNEL_INTERNAL * ar9300_check_chan(struct ath_hal *ah,
const struct ieee80211_channel *chan);
extern HAL_BOOL ar9300_set_key_cache_entry_mac(struct ath_hal *,
u_int16_t entry, const u_int8_t *mac);
extern HAL_BOOL ar9300_set_key_cache_entry(struct ath_hal *ah, u_int16_t entry,
const HAL_KEYVAL *k, const u_int8_t *mac, int xor_key);
extern HAL_BOOL ar9300_print_keycache(struct ath_hal *ah);
#if ATH_SUPPORT_KEYPLUMB_WAR
extern HAL_BOOL ar9300_check_key_cache_entry(struct ath_hal *ah, u_int16_t entry,
const HAL_KEYVAL *k, int xorKey);
#endif
extern void ar9300_get_mac_address(struct ath_hal *ah, u_int8_t *mac);
extern HAL_BOOL ar9300_set_mac_address(struct ath_hal *ah, const u_int8_t *);
extern void ar9300_get_bss_id_mask(struct ath_hal *ah, u_int8_t *mac);
extern HAL_BOOL ar9300_set_bss_id_mask(struct ath_hal *, const u_int8_t *);
extern HAL_STATUS ar9300_select_ant_config(struct ath_hal *ah, u_int32_t cfg);
#if 0
extern u_int32_t ar9300_ant_ctrl_common_get(struct ath_hal *ah, HAL_BOOL is_2ghz);
#endif
extern HAL_BOOL ar9300_ant_swcom_sel(struct ath_hal *ah, u_int8_t ops,
u_int32_t *common_tbl1, u_int32_t *common_tbl2);
extern HAL_BOOL ar9300_set_regulatory_domain(struct ath_hal *ah,
u_int16_t reg_domain, HAL_STATUS *stats);
extern u_int ar9300_get_wireless_modes(struct ath_hal *ah);
extern void ar9300_enable_rf_kill(struct ath_hal *);
extern HAL_BOOL ar9300_gpio_cfg_output(struct ath_hal *, u_int32_t gpio, HAL_GPIO_MUX_TYPE signalType);
extern HAL_BOOL ar9300_gpio_cfg_output_led_off(struct ath_hal *, u_int32_t gpio, HAL_GPIO_MUX_TYPE signalType);
extern HAL_BOOL ar9300_gpio_cfg_input(struct ath_hal *, u_int32_t gpio);
extern HAL_BOOL ar9300_gpio_set(struct ath_hal *, u_int32_t gpio, u_int32_t val);
extern u_int32_t ar9300_gpio_get(struct ath_hal *ah, u_int32_t gpio);
extern u_int32_t ar9300_gpio_get_intr(struct ath_hal *ah);
extern void ar9300_gpio_set_intr(struct ath_hal *ah, u_int, u_int32_t ilevel);
extern u_int32_t ar9300_gpio_get_polarity(struct ath_hal *ah);
extern void ar9300_gpio_set_polarity(struct ath_hal *ah, u_int32_t, u_int32_t);
extern u_int32_t ar9300_gpio_get_mask(struct ath_hal *ah);
extern int ar9300_gpio_set_mask(struct ath_hal *ah, u_int32_t mask, u_int32_t pol_map);
extern void ar9300_set_led_state(struct ath_hal *ah, HAL_LED_STATE state);
extern void ar9300_set_power_led_state(struct ath_hal *ah, u_int8_t enable);
extern void ar9300_set_network_led_state(struct ath_hal *ah, u_int8_t enable);
extern void ar9300_write_associd(struct ath_hal *ah, const u_int8_t *bssid,
u_int16_t assoc_id);
extern u_int32_t ar9300_ppm_get_rssi_dump(struct ath_hal *);
extern u_int32_t ar9300_ppm_arm_trigger(struct ath_hal *);
extern int ar9300_ppm_get_trigger(struct ath_hal *);
extern u_int32_t ar9300_ppm_force(struct ath_hal *);
extern void ar9300_ppm_un_force(struct ath_hal *);
extern u_int32_t ar9300_ppm_get_force_state(struct ath_hal *);
extern void ar9300_set_dcs_mode(struct ath_hal *ah, u_int32_t);
extern u_int32_t ar9300_get_dcs_mode(struct ath_hal *ah);
extern u_int32_t ar9300_get_tsf32(struct ath_hal *ah);
extern u_int64_t ar9300_get_tsf64(struct ath_hal *ah);
extern u_int32_t ar9300_get_tsf2_32(struct ath_hal *ah);
extern void ar9300_set_tsf64(struct ath_hal *ah, u_int64_t tsf);
extern void ar9300_reset_tsf(struct ath_hal *ah);
extern void ar9300_set_basic_rate(struct ath_hal *ah, HAL_RATE_SET *pSet);
extern u_int32_t ar9300_get_random_seed(struct ath_hal *ah);
extern HAL_BOOL ar9300_detect_card_present(struct ath_hal *ah);
extern void ar9300_update_mib_mac_stats(struct ath_hal *ah);
extern void ar9300_get_mib_mac_stats(struct ath_hal *ah, HAL_MIB_STATS* stats);
extern HAL_BOOL ar9300_is_japan_channel_spread_supported(struct ath_hal *ah);
extern u_int32_t ar9300_get_cur_rssi(struct ath_hal *ah);
extern u_int32_t ar9300_get_rssi_chain0(struct ath_hal *ah);
extern u_int ar9300_get_def_antenna(struct ath_hal *ah);
extern void ar9300_set_def_antenna(struct ath_hal *ah, u_int antenna);
extern HAL_BOOL ar9300_set_antenna_switch(struct ath_hal *ah,
HAL_ANT_SETTING settings, const struct ieee80211_channel *chan,
u_int8_t *, u_int8_t *, u_int8_t *);
extern HAL_BOOL ar9300_is_sleep_after_beacon_broken(struct ath_hal *ah);
extern HAL_BOOL ar9300_set_slot_time(struct ath_hal *, u_int);
extern HAL_BOOL ar9300_set_ack_timeout(struct ath_hal *, u_int);
extern u_int ar9300_get_ack_timeout(struct ath_hal *);
extern HAL_STATUS ar9300_set_quiet(struct ath_hal *ah, u_int32_t period, u_int32_t duration,
u_int32_t next_start, HAL_QUIET_FLAG flag);
extern void ar9300_set_pcu_config(struct ath_hal *);
extern HAL_STATUS ar9300_get_capability(struct ath_hal *, HAL_CAPABILITY_TYPE,
u_int32_t, u_int32_t *);
extern HAL_BOOL ar9300_set_capability(struct ath_hal *, HAL_CAPABILITY_TYPE,
u_int32_t, u_int32_t, HAL_STATUS *);
extern HAL_BOOL ar9300_get_diag_state(struct ath_hal *ah, int request,
const void *args, u_int32_t argsize,
void **result, u_int32_t *resultsize);
extern void ar9300_get_desc_info(struct ath_hal *ah, HAL_DESC_INFO *desc_info);
extern uint32_t ar9300_get_11n_ext_busy(struct ath_hal *ah);
extern void ar9300_set_11n_mac2040(struct ath_hal *ah, HAL_HT_MACMODE mode);
extern HAL_HT_RXCLEAR ar9300_get_11n_rx_clear(struct ath_hal *ah);
extern void ar9300_set_11n_rx_clear(struct ath_hal *ah, HAL_HT_RXCLEAR rxclear);
extern HAL_BOOL ar9300_set_power_mode(struct ath_hal *ah, HAL_POWER_MODE mode,
int set_chip);
extern HAL_POWER_MODE ar9300_get_power_mode(struct ath_hal *ah);
extern HAL_BOOL ar9300_set_power_mode_awake(struct ath_hal *ah, int set_chip);
extern void ar9300_set_sm_power_mode(struct ath_hal *ah, HAL_SMPS_MODE mode);
extern void ar9300_config_pci_power_save(struct ath_hal *ah, int restore, int power_off);
extern void ar9300_force_tsf_sync(struct ath_hal *ah, const u_int8_t *bssid,
u_int16_t assoc_id);
#if ATH_WOW
extern void ar9300_wow_apply_pattern(struct ath_hal *ah, u_int8_t *p_ath_pattern,
u_int8_t *p_ath_mask, int32_t pattern_count, u_int32_t ath_pattern_len);
//extern u_int32_t ar9300_wow_wake_up(struct ath_hal *ah,u_int8_t *chipPatternBytes);
extern u_int32_t ar9300_wow_wake_up(struct ath_hal *ah, HAL_BOOL offloadEnable);
extern bool ar9300_wow_enable(struct ath_hal *ah, u_int32_t pattern_enable, u_int32_t timeout_in_seconds, int clearbssid,
HAL_BOOL offloadEnable);
#if ATH_WOW_OFFLOAD
/* ARP offload */
#define WOW_OFFLOAD_ARP_INFO_MAX 2
struct hal_wow_offload_arp_info {
u_int32_t valid;
u_int32_t id;
u_int32_t Flags;
union {
u_int8_t u8[4];
u_int32_t u32;
} RemoteIPv4Address;
union {
u_int8_t u8[4];
u_int32_t u32;
} HostIPv4Address;
union {
u_int8_t u8[6];
u_int32_t u32[2];
} MacAddress;
};
/* NS offload */
#define WOW_OFFLOAD_NS_INFO_MAX 2
struct hal_wow_offload_ns_info {
u_int32_t valid;
u_int32_t id;
u_int32_t Flags;
union {
u_int8_t u8[16];
u_int32_t u32[4];
} RemoteIPv6Address;
union {
u_int8_t u8[16];
u_int32_t u32[4];
} SolicitedNodeIPv6Address;
union {
u_int8_t u8[6];
u_int32_t u32[2];
} MacAddress;
union {
u_int8_t u8[16];
u_int32_t u32[4];
} TargetIPv6Addresses[2];
};
extern void ar9300_wowoffload_prep(struct ath_hal *ah);
extern void ar9300_wowoffload_post(struct ath_hal *ah);
extern u_int32_t ar9300_wowoffload_download_rekey_data(struct ath_hal *ah, u_int32_t *data, u_int32_t size);
extern void ar9300_wowoffload_retrieve_data(struct ath_hal *ah, void *buf, u_int32_t param);
extern void ar9300_wowoffload_download_acer_magic(struct ath_hal *ah, HAL_BOOL valid, u_int8_t* datap, u_int32_t bytes);
extern void ar9300_wowoffload_download_acer_swka(struct ath_hal *ah, u_int32_t id, HAL_BOOL valid, u_int32_t period, u_int32_t size, u_int32_t* datap);
extern void ar9300_wowoffload_download_arp_info(struct ath_hal *ah, u_int32_t id, u_int32_t *data);
extern void ar9300_wowoffload_download_ns_info(struct ath_hal *ah, u_int32_t id, u_int32_t *data);
#endif /* ATH_WOW_OFFLOAD */
#endif
extern HAL_BOOL ar9300_reset(struct ath_hal *ah, HAL_OPMODE opmode,
struct ieee80211_channel *chan, HAL_HT_MACMODE macmode, u_int8_t txchainmask,
u_int8_t rxchainmask, HAL_HT_EXTPROTSPACING extprotspacing,
HAL_BOOL b_channel_change, HAL_STATUS *status, int is_scan);
extern HAL_BOOL ar9300_lean_channel_change(struct ath_hal *ah, HAL_OPMODE opmode, struct ieee80211_channel *chan,
HAL_HT_MACMODE macmode, u_int8_t txchainmask, u_int8_t rxchainmask);
extern HAL_BOOL ar9300_set_reset_reg(struct ath_hal *ah, u_int32_t type);
extern void ar9300_init_pll(struct ath_hal *ah, struct ieee80211_channel *chan);
extern void ar9300_green_ap_ps_on_off( struct ath_hal *ah, u_int16_t rxMask);
extern u_int16_t ar9300_is_single_ant_power_save_possible(struct ath_hal *ah);
extern void ar9300_set_operating_mode(struct ath_hal *ah, int opmode);
extern HAL_BOOL ar9300_phy_disable(struct ath_hal *ah);
extern HAL_BOOL ar9300_disable(struct ath_hal *ah);
extern HAL_BOOL ar9300_chip_reset(struct ath_hal *ah, struct ieee80211_channel *);
extern HAL_BOOL ar9300_calibration(struct ath_hal *ah, struct ieee80211_channel *chan,
u_int8_t rxchainmask, HAL_BOOL longcal, HAL_BOOL *isIQdone, int is_scan, u_int32_t *sched_cals);
extern void ar9300_reset_cal_valid(struct ath_hal *ah,
const struct ieee80211_channel *chan,
HAL_BOOL *isIQdone, u_int32_t cal_type);
extern void ar9300_iq_cal_collect(struct ath_hal *ah, u_int8_t num_chains);
extern void ar9300_iq_calibration(struct ath_hal *ah, u_int8_t num_chains);
extern void ar9300_temp_comp_cal_collect(struct ath_hal *ah);
extern void ar9300_temp_comp_calibration(struct ath_hal *ah, u_int8_t num_chains);
extern int16_t ar9300_get_min_cca_pwr(struct ath_hal *ah);
extern void ar9300_upload_noise_floor(struct ath_hal *ah, int is2G, int16_t nfarray[]);
extern HAL_BOOL ar9300_set_tx_power_limit(struct ath_hal *ah, u_int32_t limit,
u_int16_t extra_txpow, u_int16_t tpc_in_db);
extern void ar9300_chain_noise_floor(struct ath_hal *ah, int16_t *nf_buf,
struct ieee80211_channel *chan, int is_scan);
extern int16_t ar9300_get_nf_from_reg(struct ath_hal *ah, struct ieee80211_channel *chan, int wait_time);
extern int ar9300_get_rx_nf_offset(struct ath_hal *ah, struct ieee80211_channel *chan, int8_t *nf_pwr, int8_t *nf_cal);
extern HAL_BOOL ar9300_load_nf(struct ath_hal *ah, int16_t nf[]);
extern HAL_RFGAIN ar9300_get_rfgain(struct ath_hal *ah);
extern const HAL_RATE_TABLE *ar9300_get_rate_table(struct ath_hal *, u_int mode);
extern int16_t ar9300_get_rate_txpower(struct ath_hal *ah, u_int mode,
u_int8_t rate_index, u_int8_t chainmask, u_int8_t mimo_mode);
extern void ar9300_init_rate_txpower(struct ath_hal *ah, u_int mode,
const struct ieee80211_channel *chan,
u_int8_t powerPerRate[],
u_int8_t chainmask);
extern void ar9300_adjust_reg_txpower_cdd(struct ath_hal *ah,
u_int8_t powerPerRate[]);
extern HAL_STATUS ath_hal_get_rate_power_limit_from_eeprom(struct ath_hal *ah,
u_int16_t freq, int8_t *max_rate_power, int8_t *min_rate_power);
extern void ar9300_reset_tx_status_ring(struct ath_hal *ah);
extern void ar9300_enable_mib_counters(struct ath_hal *);
extern void ar9300_disable_mib_counters(struct ath_hal *);
extern void ar9300_ani_attach(struct ath_hal *);
extern void ar9300_ani_detach(struct ath_hal *);
extern struct ar9300_ani_state *ar9300_ani_get_current_state(struct ath_hal *);
extern HAL_ANI_STATS *ar9300_ani_get_current_stats(struct ath_hal *);
extern HAL_BOOL ar9300_ani_control(struct ath_hal *, HAL_ANI_CMD cmd, int param);
struct ath_rx_status;
extern void ar9300_process_mib_intr(struct ath_hal *, const HAL_NODE_STATS *);
extern void ar9300_ani_ar_poll(struct ath_hal *, const HAL_NODE_STATS *,
const struct ieee80211_channel *, HAL_ANISTATS *);
extern void ar9300_ani_reset(struct ath_hal *, HAL_BOOL is_scanning);
extern void ar9300_ani_init_defaults(struct ath_hal *ah, HAL_HT_MACMODE macmode);
extern void ar9300_enable_tpc(struct ath_hal *);
extern HAL_BOOL ar9300_rf_gain_cap_apply(struct ath_hal *ah, int is2GHz);
extern void ar9300_rx_gain_table_apply(struct ath_hal *ah);
extern void ar9300_tx_gain_table_apply(struct ath_hal *ah);
extern void ar9300_mat_enable(struct ath_hal *ah, int enable);
extern void ar9300_dump_keycache(struct ath_hal *ah, int n, u_int32_t *entry);
extern HAL_BOOL ar9300_ant_ctrl_set_lna_div_use_bt_ant(struct ath_hal * ah, HAL_BOOL enable, const struct ieee80211_channel * chan);
/* BB Panic Watchdog declarations */
#define HAL_BB_PANIC_WD_TMO 25 /* in ms, 0 to disable */
#define HAL_BB_PANIC_WD_TMO_HORNET 85
extern void ar9300_config_bb_panic_watchdog(struct ath_hal *);
extern void ar9300_handle_bb_panic(struct ath_hal *);
extern int ar9300_get_bb_panic_info(struct ath_hal *ah, struct hal_bb_panic_info *bb_panic);
extern HAL_BOOL ar9300_handle_radar_bb_panic(struct ath_hal *ah);
extern void ar9300_set_hal_reset_reason(struct ath_hal *ah, u_int8_t resetreason);
/* DFS declarations */
extern void ar9300_check_dfs(struct ath_hal *ah, struct ieee80211_channel *chan);
extern void ar9300_dfs_found(struct ath_hal *ah, struct ieee80211_channel *chan,
u_int64_t nolTime);
extern void ar9300_enable_dfs(struct ath_hal *ah, HAL_PHYERR_PARAM *pe);
extern void ar9300_get_dfs_thresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe);
extern HAL_BOOL ar9300_radar_wait(struct ath_hal *ah, struct ieee80211_channel *chan);
extern struct dfs_pulse * ar9300_get_dfs_radars(struct ath_hal *ah,
u_int32_t dfsdomain, int *numradars, struct dfs_bin5pulse **bin5pulses,
int *numb5radars, HAL_PHYERR_PARAM *pe);
extern void ar9300_adjust_difs(struct ath_hal *ah, u_int32_t val);
extern u_int32_t ar9300_dfs_config_fft(struct ath_hal *ah, HAL_BOOL is_enable);
extern void ar9300_cac_tx_quiet(struct ath_hal *ah, HAL_BOOL enable);
extern void ar9300_dfs_cac_war(struct ath_hal *ah, u_int32_t start);
extern struct ieee80211_channel * ar9300_get_extension_channel(struct ath_hal *ah);
extern HAL_BOOL ar9300_is_fast_clock_enabled(struct ath_hal *ah);
extern void ar9300_mark_phy_inactive(struct ath_hal *ah);
/* Spectral scan declarations */
extern void ar9300_configure_spectral_scan(struct ath_hal *ah, HAL_SPECTRAL_PARAM *ss);
extern void ar9300_set_cca_threshold(struct ath_hal *ah, u_int8_t thresh62);
extern void ar9300_get_spectral_params(struct ath_hal *ah, HAL_SPECTRAL_PARAM *ss);
extern HAL_BOOL ar9300_is_spectral_active(struct ath_hal *ah);
extern HAL_BOOL ar9300_is_spectral_enabled(struct ath_hal *ah);
extern void ar9300_start_spectral_scan(struct ath_hal *ah);
extern void ar9300_stop_spectral_scan(struct ath_hal *ah);
extern u_int32_t ar9300_get_spectral_config(struct ath_hal *ah);
extern void ar9300_restore_spectral_config(struct ath_hal *ah, u_int32_t restoreval);
int16_t ar9300_get_ctl_chan_nf(struct ath_hal *ah);
int16_t ar9300_get_ext_chan_nf(struct ath_hal *ah);
/* End spectral scan declarations */
/* Raw ADC capture functions */
extern void ar9300_enable_test_addac_mode(struct ath_hal *ah);
extern void ar9300_disable_test_addac_mode(struct ath_hal *ah);
extern void ar9300_begin_adc_capture(struct ath_hal *ah, int auto_agc_gain);
extern HAL_STATUS ar9300_retrieve_capture_data(struct ath_hal *ah, u_int16_t chain_mask, int disable_dc_filter, void *sample_buf, u_int32_t *max_samples);
extern HAL_STATUS ar9300_calc_adc_ref_powers(struct ath_hal *ah, int freq_mhz, int16_t *sample_min, int16_t *sample_max, int32_t *chain_ref_pwr, int num_chain_ref_pwr);
extern HAL_STATUS ar9300_get_min_agc_gain(struct ath_hal *ah, int freq_mhz, int32_t *chain_gain, int num_chain_gain);
extern HAL_BOOL ar9300_reset_11n(struct ath_hal *ah, HAL_OPMODE opmode,
struct ieee80211_channel *chan, HAL_BOOL b_channel_change, HAL_STATUS *status);
extern void ar9300_set_coverage_class(struct ath_hal *ah, u_int8_t coverageclass, int now);
extern void ar9300_get_channel_centers(struct ath_hal *ah,
const struct ieee80211_channel *chan,
CHAN_CENTERS *centers);
extern u_int16_t ar9300_get_ctl_center(struct ath_hal *ah,
const struct ieee80211_channel *chan);
extern u_int16_t ar9300_get_ext_center(struct ath_hal *ah,
const struct ieee80211_channel *chan);
extern u_int32_t ar9300_get_mib_cycle_counts_pct(struct ath_hal *, u_int32_t*, u_int32_t*, u_int32_t*);
extern void ar9300_dma_reg_dump(struct ath_hal *);
extern HAL_BOOL ar9300_set_11n_rx_rifs(struct ath_hal *ah, HAL_BOOL enable);
extern HAL_BOOL ar9300_set_rifs_delay(struct ath_hal *ah, HAL_BOOL enable);
extern HAL_BOOL ar9300_set_smart_antenna(struct ath_hal *ah, HAL_BOOL enable);
extern HAL_BOOL ar9300_detect_bb_hang(struct ath_hal *ah);
extern HAL_BOOL ar9300_detect_mac_hang(struct ath_hal *ah);
#ifdef ATH_BT_COEX
extern void ar9300_set_bt_coex_info(struct ath_hal *ah, HAL_BT_COEX_INFO *btinfo);
extern void ar9300_bt_coex_config(struct ath_hal *ah, HAL_BT_COEX_CONFIG *btconf);
extern void ar9300_bt_coex_set_qcu_thresh(struct ath_hal *ah, int qnum);
extern void ar9300_bt_coex_set_weights(struct ath_hal *ah, u_int32_t stomp_type);
extern void ar9300_bt_coex_setup_bmiss_thresh(struct ath_hal *ah, u_int32_t thresh);
extern void ar9300_bt_coex_set_parameter(struct ath_hal *ah, u_int32_t type, u_int32_t value);
extern void ar9300_bt_coex_disable(struct ath_hal *ah);
extern int ar9300_bt_coex_enable(struct ath_hal *ah);
extern void ar9300_init_bt_coex(struct ath_hal *ah);
extern u_int32_t ar9300_get_bt_active_gpio(struct ath_hal *ah, u_int32_t reg);
extern u_int32_t ar9300_get_wlan_active_gpio(struct ath_hal *ah, u_int32_t reg,u_int32_t bOn);
#endif
extern int ar9300_alloc_generic_timer(struct ath_hal *ah, HAL_GEN_TIMER_DOMAIN tsf);
extern void ar9300_free_generic_timer(struct ath_hal *ah, int index);
extern void ar9300_start_generic_timer(struct ath_hal *ah, int index, u_int32_t timer_next,
u_int32_t timer_period);
extern void ar9300_stop_generic_timer(struct ath_hal *ah, int index);
extern void ar9300_get_gen_timer_interrupts(struct ath_hal *ah, u_int32_t *trigger,
u_int32_t *thresh);
extern void ar9300_start_tsf2(struct ath_hal *ah);
extern void ar9300_chk_rssi_update_tx_pwr(struct ath_hal *ah, int rssi);
extern HAL_BOOL ar9300_is_skip_paprd_by_greentx(struct ath_hal *ah);
extern void ar9300_control_signals_for_green_tx_mode(struct ath_hal *ah);
extern void ar9300_hwgreentx_set_pal_spare(struct ath_hal *ah, int value);
extern HAL_BOOL ar9300_is_ani_noise_spur(struct ath_hal *ah);
extern void ar9300_reset_hw_beacon_proc_crc(struct ath_hal *ah);
extern int32_t ar9300_get_hw_beacon_rssi(struct ath_hal *ah);
extern void ar9300_set_hw_beacon_rssi_threshold(struct ath_hal *ah,
u_int32_t rssi_threshold);
extern void ar9300_reset_hw_beacon_rssi(struct ath_hal *ah);
extern void ar9300_set_hw_beacon_proc(struct ath_hal *ah, HAL_BOOL on);
extern void ar9300_get_vow_stats(struct ath_hal *ah, HAL_VOWSTATS *p_stats,
u_int8_t);
extern int ar9300_get_spur_info(struct ath_hal * ah, int *enable, int len, u_int16_t *freq);
extern int ar9300_set_spur_info(struct ath_hal * ah, int enable, int len, u_int16_t *freq);
extern void ar9300_wow_set_gpio_reset_low(struct ath_hal * ah);
extern HAL_BOOL ar9300_get_mib_cycle_counts(struct ath_hal *, HAL_SURVEY_SAMPLE *);
extern void ar9300_clear_mib_counters(struct ath_hal *ah);
/* EEPROM interface functions */
/* Common Interface functions */
extern HAL_STATUS ar9300_eeprom_attach(struct ath_hal *);
extern u_int32_t ar9300_eeprom_get(struct ath_hal_9300 *ahp, EEPROM_PARAM param);
extern u_int32_t ar9300_ini_fixup(struct ath_hal *ah,
ar9300_eeprom_t *p_eep_data,
u_int32_t reg,
u_int32_t val);
extern HAL_STATUS ar9300_eeprom_set_transmit_power(struct ath_hal *ah,
ar9300_eeprom_t *p_eep_data, const struct ieee80211_channel *chan,
u_int16_t cfg_ctl, u_int16_t twice_antenna_reduction,
u_int16_t twice_max_regulatory_power, u_int16_t power_limit);
extern void ar9300_eeprom_set_addac(struct ath_hal *, struct ieee80211_channel *);
extern HAL_BOOL ar9300_eeprom_set_param(struct ath_hal *ah, EEPROM_PARAM param, u_int32_t value);
extern HAL_BOOL ar9300_eeprom_set_board_values(struct ath_hal *, const struct ieee80211_channel *);
extern HAL_BOOL ar9300_eeprom_read_word(struct ath_hal *, u_int off, u_int16_t *data);
extern HAL_BOOL ar9300_eeprom_read(struct ath_hal *ah, long address, u_int8_t *buffer, int many);
extern HAL_BOOL ar9300_otp_read(struct ath_hal *ah, u_int off, u_int32_t *data, HAL_BOOL is_wifi);
extern HAL_BOOL ar9300_flash_read(struct ath_hal *, u_int off, u_int16_t *data);
extern HAL_BOOL ar9300_flash_write(struct ath_hal *, u_int off, u_int16_t data);
extern u_int ar9300_eeprom_dump_support(struct ath_hal *ah, void **pp_e);
extern u_int8_t ar9300_eeprom_get_num_ant_config(struct ath_hal_9300 *ahp, HAL_FREQ_BAND freq_band);
extern HAL_STATUS ar9300_eeprom_get_ant_cfg(struct ath_hal_9300 *ahp, const struct ieee80211_channel *chan,
u_int8_t index, u_int16_t *config);
extern u_int8_t* ar9300_eeprom_get_cust_data(struct ath_hal_9300 *ahp);
extern u_int8_t *ar9300_eeprom_get_spur_chans_ptr(struct ath_hal *ah, HAL_BOOL is_2ghz);
extern HAL_BOOL ar9300_interference_is_present(struct ath_hal *ah);
extern HAL_BOOL ar9300_tuning_caps_apply(struct ath_hal *ah);
extern void ar9300_disp_tpc_tables(struct ath_hal *ah);
extern u_int8_t *ar9300_get_tpc_tables(struct ath_hal *ah);
extern u_int8_t ar9300_eeprom_set_tx_gain_cap(struct ath_hal *ah, int *tx_gain_max);
extern u_int8_t ar9300_eeprom_tx_gain_table_index_max_apply(struct ath_hal *ah, u_int16_t channel);
/* Common EEPROM Help function */
extern void ar9300_set_immunity(struct ath_hal *ah, HAL_BOOL enable);
extern void ar9300_get_hw_hangs(struct ath_hal *ah, hal_hw_hangs_t *hangs);
extern u_int ar9300_mac_to_clks(struct ath_hal *ah, u_int clks);
/* tx_bf interface */
#define ar9300_init_txbf(ah)
#define ar9300_set_11n_txbf_sounding(ah, ds, series, cec, opt)
#define ar9300_set_11n_txbf_cal(ah, ds, cal_pos, code_rate, cec, opt)
#define ar9300_txbf_save_cv_from_compress( \
ah, key_idx, mimo_control, compress_rpt) \
false
#define ar9300_txbf_save_cv_from_non_compress( \
ah, key_idx, mimo_control, non_compress_rpt) \
false
#define ar9300_txbf_rc_update( \
ah, rx_status, local_h, csi_frame, ness_a, ness_b, bw) \
false
#define ar9300_fill_csi_frame( \
ah, rx_status, bandwidth, local_h, csi_frame_body) \
0
#define ar9300_fill_txbf_capabilities(ah)
#define ar9300_get_txbf_capabilities(ah) NULL
#define ar9300_txbf_set_key( \
ah, entry, rx_staggered_sounding, channel_estimation_cap, mmss)
#define ar9300_read_key_cache_mac(ah, entry, mac) false
#define ar9300_txbf_get_cv_cache_nr(ah, key_idx, nr)
#define ar9300_set_selfgenrate_limit(ah, ts_ratecode)
#define ar9300_reset_lowest_txrate(ah)
#define ar9300_txbf_set_basic_set(ah)
extern void ar9300_crdc_rx_notify(struct ath_hal *ah, struct ath_rx_status *rxs);
extern void ar9300_chain_rssi_diff_compensation(struct ath_hal *ah);
#if ATH_SUPPORT_MCI
extern void ar9300_mci_bt_coex_set_weights(struct ath_hal *ah, u_int32_t stomp_type);
extern void ar9300_mci_bt_coex_disable(struct ath_hal *ah);
extern int ar9300_mci_bt_coex_enable(struct ath_hal *ah);
extern void ar9300_mci_setup (struct ath_hal *ah, u_int32_t gpm_addr,
void *gpm_buf, u_int16_t len,
u_int32_t sched_addr);
extern void ar9300_mci_remote_reset(struct ath_hal *ah, HAL_BOOL wait_done);
extern void ar9300_mci_send_lna_transfer(struct ath_hal *ah, HAL_BOOL wait_done);
extern void ar9300_mci_send_sys_waking(struct ath_hal *ah, HAL_BOOL wait_done);
extern HAL_BOOL ar9300_mci_send_message (struct ath_hal *ah, u_int8_t header,
u_int32_t flag, u_int32_t *payload, u_int8_t len,
HAL_BOOL wait_done, HAL_BOOL check_bt);
extern u_int32_t ar9300_mci_get_interrupt (struct ath_hal *ah,
u_int32_t *mci_int,
u_int32_t *mci_int_rx_msg);
extern u_int32_t ar9300_mci_state (struct ath_hal *ah, u_int32_t state_type, u_int32_t *p_data);
extern void ar9300_mci_reset (struct ath_hal *ah, HAL_BOOL en_int, HAL_BOOL is_2g, HAL_BOOL is_full_sleep);
extern void ar9300_mci_send_coex_halt_bt_gpm(struct ath_hal *ah, HAL_BOOL halt, HAL_BOOL wait_done);
extern void ar9300_mci_mute_bt(struct ath_hal *ah);
extern u_int32_t ar9300_mci_wait_for_gpm(struct ath_hal *ah, u_int8_t gpm_type, u_int8_t gpm_opcode, int32_t time_out);
extern void ar9300_mci_enable_interrupt(struct ath_hal *ah);
extern void ar9300_mci_disable_interrupt(struct ath_hal *ah);
extern void ar9300_mci_detach (struct ath_hal *ah);
extern u_int32_t ar9300_mci_check_int (struct ath_hal *ah, u_int32_t ints);
extern void ar9300_mci_sync_bt_state (struct ath_hal *ah);
extern void ar9300_mci_2g5g_changed(struct ath_hal *ah, HAL_BOOL is_2g);
extern void ar9300_mci_2g5g_switch(struct ath_hal *ah, HAL_BOOL wait_done);
#if ATH_SUPPORT_AIC
extern u_int32_t ar9300_aic_calibration (struct ath_hal *ah);
extern u_int32_t ar9300_aic_start_normal (struct ath_hal *ah);
#endif
#endif
extern HAL_STATUS ar9300_set_proxy_sta(struct ath_hal *ah, HAL_BOOL enable);
extern HAL_BOOL ar9300_regulatory_domain_override(
struct ath_hal *ah, u_int16_t regdmn);
#if ATH_ANT_DIV_COMB
extern void ar9300_ant_div_comb_get_config(struct ath_hal *ah, HAL_ANT_COMB_CONFIG* div_comb_conf);
extern void ar9300_ant_div_comb_set_config(struct ath_hal *ah, HAL_ANT_COMB_CONFIG* div_comb_conf);
#endif /* ATH_ANT_DIV_COMB */
extern void ar9300_disable_phy_restart(struct ath_hal *ah,
int disable_phy_restart);
extern void ar9300_enable_keysearch_always(struct ath_hal *ah, int enable);
extern HAL_BOOL ar9300ForceVCS( struct ath_hal *ah);
extern HAL_BOOL ar9300SetDfs3StreamFix(struct ath_hal *ah, u_int32_t val);
extern HAL_BOOL ar9300Get3StreamSignature( struct ath_hal *ah);
#ifdef ATH_TX99_DIAG
#ifndef ATH_SUPPORT_HTC
extern void ar9300_tx99_channel_pwr_update(struct ath_hal *ah, struct ieee80211_channel *c, u_int32_t txpower);
extern void ar9300_tx99_chainmsk_setup(struct ath_hal *ah, int tx_chainmask);
extern void ar9300_tx99_set_single_carrier(struct ath_hal *ah, int tx_chain_mask, int chtype);
extern void ar9300_tx99_start(struct ath_hal *ah, u_int8_t *data);
extern void ar9300_tx99_stop(struct ath_hal *ah);
#endif /* ATH_SUPPORT_HTC */
#endif /* ATH_TX99_DIAG */
extern HAL_BOOL ar9300_set_ctl_pwr(struct ath_hal *ah, u_int8_t *ctl_array);
extern void ar9300_set_txchainmaskopt(struct ath_hal *ah, u_int8_t mask);
enum {
AR9300_COEFF_TX_TYPE = 0,
AR9300_COEFF_RX_TYPE
};
#endif /* _ATH_AR9300_H_ */
Reference in New Issue View Git Blame Copy Permalink