freebsd-dev/sys/sparc64/pci/ofw_pcib_subr.c
Kip Macy c94d217091 The T2000 has multiple PCI domains requiring bus allocation to be done differently.
This pulls in changes by jmg from perforce and makes them sun4v only for now.

Approved by: scottl (acting as backup for mentor rwatson)
2006-10-12 04:44:01 +00:00

147 lines
4.4 KiB
C

/*-
* Copyright (c) 2003 by Thomas Moestl <tmm@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ofw_pci.h"
#include "opt_global.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_pci.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/ofw_bus.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcib_private.h>
#include "pcib_if.h"
#include <sparc64/pci/ofw_pci.h>
#include <sparc64/pci/ofw_pcib_subr.h>
void
ofw_pcib_gen_setup(device_t bridge)
{
struct ofw_pcib_gen_softc *sc;
#ifndef SUN4V
u_int secbus;
#endif
sc = device_get_softc(bridge);
sc->ops_pcib_sc.dev = bridge;
sc->ops_node = ofw_bus_get_node(bridge);
KASSERT(sc->ops_node != 0,
("ofw_pcib_gen_setup: no ofw pci parent bus!"));
/*
* Setup the secondary bus number register, by allocating a new unique
* bus number for it; the firmware preset does not always seem to be
* correct.
*/
#ifndef SUN4V
secbus = ofw_pci_alloc_busno(sc->ops_node);
pci_write_config(bridge, PCIR_PRIBUS_1, pci_get_bus(bridge), 1);
pci_write_config(bridge, PCIR_SECBUS_1, secbus, 1);
pci_write_config(bridge, PCIR_SUBBUS_1, secbus, 1);
sc->ops_pcib_sc.subbus = sc->ops_pcib_sc.secbus = secbus;
/* Notify parent bridges. */
OFW_PCI_ADJUST_BUSRANGE(device_get_parent(bridge), secbus);
#endif
ofw_bus_setup_iinfo(sc->ops_node, &sc->ops_iinfo,
sizeof(ofw_pci_intr_t));
}
int
ofw_pcib_gen_route_interrupt(device_t bridge, device_t dev, int intpin)
{
struct ofw_pcib_gen_softc *sc;
struct ofw_bus_iinfo *ii;
struct ofw_pci_register reg;
ofw_pci_intr_t pintr, mintr;
uint8_t maskbuf[sizeof(reg) + sizeof(pintr)];
sc = device_get_softc(bridge);
ii = &sc->ops_iinfo;
if (ii->opi_imapsz > 0) {
pintr = intpin;
if (ofw_bus_lookup_imap(ofw_bus_get_node(dev), ii, &reg,
sizeof(reg), &pintr, sizeof(pintr), &mintr, sizeof(mintr),
maskbuf)) {
/*
* If we've found a mapping, return it and don't map
* it again on higher levels - that causes problems
* in some cases, and never seems to be required.
*/
return (mintr);
}
} else if (intpin >= 1 && intpin <= 4) {
/*
* When an interrupt map is missing, we need to do the
* standard PCI swizzle and continue mapping at the parent.
*/
return (pcib_route_interrupt(bridge, dev, intpin));
}
/* Try at the parent. */
return (PCIB_ROUTE_INTERRUPT(device_get_parent(device_get_parent(
bridge)), bridge, intpin));
}
phandle_t
ofw_pcib_gen_get_node(device_t bridge, device_t dev)
{
struct ofw_pcib_gen_softc *sc;
sc = device_get_softc(bridge);
return (sc->ops_node);
}
void
ofw_pcib_gen_adjust_busrange(device_t bridge, u_int subbus)
{
struct ofw_pcib_gen_softc *sc;
sc = device_get_softc(bridge);
if (subbus > sc->ops_pcib_sc.subbus) {
#ifdef OFW_PCI_DEBUG
device_printf(bridge,
"adjusting secondary bus number from %d to %d\n",
sc->ops_pcib_sc.subbus, subbus);
#endif
pci_write_config(bridge, PCIR_SUBBUS_1, subbus, 1);
sc->ops_pcib_sc.subbus = subbus;
/* Notify parent bridges. */
OFW_PCI_ADJUST_BUSRANGE(device_get_parent(bridge), subbus);
}
}