freebsd-nq/sys/modules/gem/Makefile

# $FreeBSD$

.PATH: ${.CURDIR}/../../dev/gem

KMOD=	if_gem
SRCS=	bus_if.h device_if.h if_gem.c if_gem_pci.c ${if_gem_sbus} miibus_if.h
SRCS+=	${ofw_bus_if} pci_if.h

.if ${MACHINE} == "sparc64"
if_gem_sbus=	if_gem_sbus.c
.endif

.if ${MACHINE_CPUARCH} == "powerpc" || ${MACHINE_CPUARCH} == "sparc64"
ofw_bus_if=	ofw_bus_if.h
.endif

.include <bsd.kmod.mk>
Build a gem module, for sparc64 only for now. 2003-01-08 20:40:29 +00:00			`# $FreeBSD$`

			`.PATH: ${.CURDIR}/../../dev/gem`

			`KMOD= if_gem`
Merge r207585 from cas(4): - Don't probe for PHYs if we already know to use a SERDES. Unlike as with cas(4) this only serves to speed up the the device attach though and can only be determined via the OFW device tree but not from the VPD. - Don't touch the MIF when using a SERDES. - Add some missing bus space barriers, mainly in the PCS code path. 2010-09-16 09:29:48 +00:00			`SRCS= bus_if.h device_if.h if_gem.c if_gem_pci.c ${if_gem_sbus} miibus_if.h`
			`SRCS+= ${ofw_bus_if} pci_if.h`
- Initialize the ifnet structure, especially if_dname, before probing the PHYs as some PHY drivers use it (but probably shouldn't). How gem(4) has worked with brgphy(4) on powerpc without this so far is unclear to me. - Introduce a dying flag which is set during detach and checked in gem_ioctl() in order to prevent active BPF listeners to clear promiscuous mode which may lead to the tick callout being restarted which will trigger a panic once it's actually gone. - In gem_stop() reset rather than just disable the transmitter and receiver in order to ensure we're not unloading DMA maps still in use by the hardware. [1] - The blanking time is specified in PCI clocks so we should use twice the value when operating at 66MHz. - Spell some 2 as ETHER_ALIGN and a 19 as GEM_STATUS_TX_COMPLETION_SHFT to make the actual intentions clear. - As we don't unload the peak attempts counter ignore its overflow interrupts. - Remove a stale setting of a variable to GEM_TD_INTERRUPT_ME which isn't used afterwards. - For optimum performance increment the TX kick register in multiples of 4 if possible as suggested by the documentation. - Partially revert r164931; drivers should only clear the watchdog timer if all outstanding TX descriptors are done. - Fix some debugging strings. - Add a missing BUS_DMASYNC_POSTWRITE in gem_rint(). - As the error paths in the interrupt handler are generally unlikely predict them as false. - Add support for the SBus version of the GEM controller. [2] - Add some lock assertions. - Improve some comments. - Fix some more or less cosmetic issues in the code of the PCI front-end. - Change some softc members to be unsigned where more appropriate and remove unused ones. Approved by: re (kib) Obtained from: NetBSD (partially) [2], OpenBSD [1] MFC after: 2 weeks 2009-06-23 20:36:59 +00:00
			`.if ${MACHINE} == "sparc64"`
Merge r207585 from cas(4): - Don't probe for PHYs if we already know to use a SERDES. Unlike as with cas(4) this only serves to speed up the the device attach though and can only be determined via the OFW device tree but not from the VPD. - Don't touch the MIF when using a SERDES. - Add some missing bus space barriers, mainly in the PCS code path. 2010-09-16 09:29:48 +00:00			`if_gem_sbus= if_gem_sbus.c`
			`.endif`

			`.if ${MACHINE_CPUARCH} == "powerpc" \|\| ${MACHINE_CPUARCH} == "sparc64"`
			`ofw_bus_if= ofw_bus_if.h`
- Initialize the ifnet structure, especially if_dname, before probing the PHYs as some PHY drivers use it (but probably shouldn't). How gem(4) has worked with brgphy(4) on powerpc without this so far is unclear to me. - Introduce a dying flag which is set during detach and checked in gem_ioctl() in order to prevent active BPF listeners to clear promiscuous mode which may lead to the tick callout being restarted which will trigger a panic once it's actually gone. - In gem_stop() reset rather than just disable the transmitter and receiver in order to ensure we're not unloading DMA maps still in use by the hardware. [1] - The blanking time is specified in PCI clocks so we should use twice the value when operating at 66MHz. - Spell some 2 as ETHER_ALIGN and a 19 as GEM_STATUS_TX_COMPLETION_SHFT to make the actual intentions clear. - As we don't unload the peak attempts counter ignore its overflow interrupts. - Remove a stale setting of a variable to GEM_TD_INTERRUPT_ME which isn't used afterwards. - For optimum performance increment the TX kick register in multiples of 4 if possible as suggested by the documentation. - Partially revert r164931; drivers should only clear the watchdog timer if all outstanding TX descriptors are done. - Fix some debugging strings. - Add a missing BUS_DMASYNC_POSTWRITE in gem_rint(). - As the error paths in the interrupt handler are generally unlikely predict them as false. - Add support for the SBus version of the GEM controller. [2] - Add some lock assertions. - Improve some comments. - Fix some more or less cosmetic issues in the code of the PCI front-end. - Change some softc members to be unsigned where more appropriate and remove unused ones. Approved by: re (kib) Obtained from: NetBSD (partially) [2], OpenBSD [1] MFC after: 2 weeks 2009-06-23 20:36:59 +00:00			`.endif`
Build a gem module, for sparc64 only for now. 2003-01-08 20:40:29 +00:00
			`.include <bsd.kmod.mk>`