2005-01-06 23:35:40 +00:00
|
|
|
/*-
|
2017-11-27 15:20:12 +00:00
|
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
|
|
*
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
* Copyright (c) 2008 Attilio Rao <attilio@FreeBSD.org>
|
|
|
|
* All rights reserved.
|
1997-03-25 16:27:20 +00:00
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
* notice(s), this list of conditions and the following disclaimer as
|
|
|
|
* the first lines of this file unmodified other than the possible
|
|
|
|
* addition of one or more copyright notices.
|
1997-03-25 16:27:20 +00:00
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
* notice(s), this list of conditions and the following disclaimer in the
|
1997-03-25 16:27:20 +00:00
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) ``AS IS'' AND ANY
|
|
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY
|
|
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
1997-03-25 16:27:20 +00:00
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
|
|
|
|
* DAMAGE.
|
1997-03-25 16:27:20 +00:00
|
|
|
*/
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#include "opt_ddb.h"
|
2012-03-28 20:58:30 +00:00
|
|
|
#include "opt_hwpmc_hooks.h"
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
2003-06-11 00:56:59 +00:00
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
1997-03-25 16:27:20 +00:00
|
|
|
#include <sys/param.h>
|
2012-12-22 09:37:34 +00:00
|
|
|
#include <sys/kdb.h>
|
2001-10-11 17:53:43 +00:00
|
|
|
#include <sys/ktr.h>
|
1997-03-25 16:27:20 +00:00
|
|
|
#include <sys/lock.h>
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#include <sys/lock_profile.h>
|
2002-08-27 09:59:47 +00:00
|
|
|
#include <sys/lockmgr.h>
|
2000-10-20 07:28:00 +00:00
|
|
|
#include <sys/mutex.h>
|
2002-08-27 09:59:47 +00:00
|
|
|
#include <sys/proc.h>
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#include <sys/sleepqueue.h>
|
2005-08-03 04:48:22 +00:00
|
|
|
#ifdef DEBUG_LOCKS
|
|
|
|
#include <sys/stack.h>
|
|
|
|
#endif
|
Introduce support for adaptive spinning in lockmgr.
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
2009-06-17 01:55:42 +00:00
|
|
|
#include <sys/sysctl.h>
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#include <sys/systm.h>
|
1997-03-25 16:27:20 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#include <machine/cpu.h>
|
2008-02-06 00:37:14 +00:00
|
|
|
|
2006-08-15 16:42:16 +00:00
|
|
|
#ifdef DDB
|
|
|
|
#include <ddb/ddb.h>
|
|
|
|
#endif
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
2012-03-28 20:58:30 +00:00
|
|
|
#ifdef HWPMC_HOOKS
|
|
|
|
#include <sys/pmckern.h>
|
|
|
|
PMC_SOFT_DECLARE( , , lock, failed);
|
|
|
|
#endif
|
|
|
|
|
Introduce support for adaptive spinning in lockmgr.
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
2009-06-17 01:55:42 +00:00
|
|
|
CTASSERT(((LK_ADAPTIVE | LK_NOSHARE) & LO_CLASSFLAGS) ==
|
|
|
|
(LK_ADAPTIVE | LK_NOSHARE));
|
|
|
|
CTASSERT(LK_UNLOCKED == (LK_UNLOCKED &
|
|
|
|
~(LK_ALL_WAITERS | LK_EXCLUSIVE_SPINNERS)));
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
|
|
|
#define SQ_EXCLUSIVE_QUEUE 0
|
|
|
|
#define SQ_SHARED_QUEUE 1
|
|
|
|
|
|
|
|
#ifndef INVARIANTS
|
|
|
|
#define _lockmgr_assert(lk, what, file, line)
|
|
|
|
#endif
|
2015-08-02 00:03:08 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#define TD_SLOCKS_INC(td) ((td)->td_lk_slocks++)
|
|
|
|
#define TD_SLOCKS_DEC(td) ((td)->td_lk_slocks--)
|
|
|
|
|
|
|
|
#ifndef DEBUG_LOCKS
|
|
|
|
#define STACK_PRINT(lk)
|
|
|
|
#define STACK_SAVE(lk)
|
|
|
|
#define STACK_ZERO(lk)
|
|
|
|
#else
|
|
|
|
#define STACK_PRINT(lk) stack_print_ddb(&(lk)->lk_stack)
|
|
|
|
#define STACK_SAVE(lk) stack_save(&(lk)->lk_stack)
|
|
|
|
#define STACK_ZERO(lk) stack_zero(&(lk)->lk_stack)
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define LOCK_LOG2(lk, string, arg1, arg2) \
|
|
|
|
if (LOCK_LOG_TEST(&(lk)->lock_object, 0)) \
|
|
|
|
CTR2(KTR_LOCK, (string), (arg1), (arg2))
|
|
|
|
#define LOCK_LOG3(lk, string, arg1, arg2, arg3) \
|
|
|
|
if (LOCK_LOG_TEST(&(lk)->lock_object, 0)) \
|
|
|
|
CTR3(KTR_LOCK, (string), (arg1), (arg2), (arg3))
|
|
|
|
|
2008-04-12 19:57:30 +00:00
|
|
|
#define GIANT_DECLARE \
|
|
|
|
int _i = 0; \
|
|
|
|
WITNESS_SAVE_DECL(Giant)
|
|
|
|
#define GIANT_RESTORE() do { \
|
|
|
|
if (_i > 0) { \
|
|
|
|
while (_i--) \
|
|
|
|
mtx_lock(&Giant); \
|
|
|
|
WITNESS_RESTORE(&Giant.lock_object, Giant); \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
#define GIANT_SAVE() do { \
|
|
|
|
if (mtx_owned(&Giant)) { \
|
|
|
|
WITNESS_SAVE(&Giant.lock_object, Giant); \
|
|
|
|
while (mtx_owned(&Giant)) { \
|
|
|
|
_i++; \
|
|
|
|
mtx_unlock(&Giant); \
|
|
|
|
} \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
|
2014-11-02 13:10:31 +00:00
|
|
|
#define LK_CAN_SHARE(x, flags) \
|
|
|
|
(((x) & LK_SHARE) && \
|
|
|
|
(((x) & (LK_EXCLUSIVE_WAITERS | LK_EXCLUSIVE_SPINNERS)) == 0 || \
|
|
|
|
(curthread->td_lk_slocks != 0 && !(flags & LK_NODDLKTREAT)) || \
|
|
|
|
(curthread->td_pflags & TDP_DEADLKTREAT)))
|
2008-04-12 19:57:30 +00:00
|
|
|
#define LK_TRYOP(x) \
|
|
|
|
((x) & LK_NOWAIT)
|
|
|
|
|
|
|
|
#define LK_CAN_WITNESS(x) \
|
|
|
|
(((x) & LK_NOWITNESS) == 0 && !LK_TRYOP(x))
|
|
|
|
#define LK_TRYWIT(x) \
|
|
|
|
(LK_TRYOP(x) ? LOP_TRYLOCK : 0)
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
Introduce support for adaptive spinning in lockmgr.
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
2009-06-17 01:55:42 +00:00
|
|
|
#define LK_CAN_ADAPT(lk, f) \
|
|
|
|
(((lk)->lock_object.lo_flags & LK_ADAPTIVE) != 0 && \
|
|
|
|
((f) & LK_SLEEPFAIL) == 0)
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#define lockmgr_disowned(lk) \
|
|
|
|
(((lk)->lk_lock & ~(LK_FLAGMASK & ~LK_SHARE)) == LK_KERNPROC)
|
|
|
|
|
2018-05-18 22:57:52 +00:00
|
|
|
#define lockmgr_xlocked_v(v) \
|
|
|
|
(((v) & ~(LK_FLAGMASK & ~LK_SHARE)) == (uintptr_t)curthread)
|
|
|
|
|
|
|
|
#define lockmgr_xlocked(lk) lockmgr_xlocked_v((lk)->lk_lock)
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
2011-11-16 21:51:17 +00:00
|
|
|
static void assert_lockmgr(const struct lock_object *lock, int how);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#ifdef DDB
|
2011-11-16 21:51:17 +00:00
|
|
|
static void db_show_lockmgr(const struct lock_object *lock);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#endif
|
2013-09-20 23:06:21 +00:00
|
|
|
static void lock_lockmgr(struct lock_object *lock, uintptr_t how);
|
2009-05-26 20:28:22 +00:00
|
|
|
#ifdef KDTRACE_HOOKS
|
2011-11-16 21:51:17 +00:00
|
|
|
static int owner_lockmgr(const struct lock_object *lock,
|
|
|
|
struct thread **owner);
|
2009-05-26 20:28:22 +00:00
|
|
|
#endif
|
2013-09-20 23:06:21 +00:00
|
|
|
static uintptr_t unlock_lockmgr(struct lock_object *lock);
|
2006-11-13 05:41:46 +00:00
|
|
|
|
|
|
|
struct lock_class lock_class_lockmgr = {
|
2007-03-09 16:19:34 +00:00
|
|
|
.lc_name = "lockmgr",
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
.lc_flags = LC_RECURSABLE | LC_SLEEPABLE | LC_SLEEPLOCK | LC_UPGRADABLE,
|
2007-11-18 14:43:53 +00:00
|
|
|
.lc_assert = assert_lockmgr,
|
2006-11-13 05:41:46 +00:00
|
|
|
#ifdef DDB
|
2007-03-09 16:27:11 +00:00
|
|
|
.lc_ddb_show = db_show_lockmgr,
|
2006-11-13 05:41:46 +00:00
|
|
|
#endif
|
2007-03-09 16:27:11 +00:00
|
|
|
.lc_lock = lock_lockmgr,
|
2009-05-26 20:28:22 +00:00
|
|
|
.lc_unlock = unlock_lockmgr,
|
|
|
|
#ifdef KDTRACE_HOOKS
|
|
|
|
.lc_owner = owner_lockmgr,
|
|
|
|
#endif
|
2006-11-13 05:41:46 +00:00
|
|
|
};
|
|
|
|
|
2018-03-04 19:12:54 +00:00
|
|
|
struct lockmgr_wait {
|
|
|
|
const char *iwmesg;
|
|
|
|
int ipri;
|
|
|
|
int itimo;
|
|
|
|
};
|
|
|
|
|
2017-02-12 09:49:44 +00:00
|
|
|
static bool __always_inline lockmgr_slock_try(struct lock *lk, uintptr_t *xp,
|
|
|
|
int flags);
|
2018-03-04 19:12:54 +00:00
|
|
|
static bool __always_inline lockmgr_sunlock_try(struct lock *lk, uintptr_t *xp);
|
|
|
|
|
|
|
|
static void
|
|
|
|
lockmgr_exit(u_int flags, struct lock_object *ilk, int wakeup_swapper)
|
|
|
|
{
|
|
|
|
struct lock_class *class;
|
|
|
|
|
|
|
|
if (flags & LK_INTERLOCK) {
|
|
|
|
class = LOCK_CLASS(ilk);
|
|
|
|
class->lc_unlock(ilk);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (__predict_false(wakeup_swapper))
|
|
|
|
kick_proc0();
|
|
|
|
}
|
2017-02-12 09:49:44 +00:00
|
|
|
|
|
|
|
static void
|
|
|
|
lockmgr_note_shared_acquire(struct lock *lk, int contested,
|
|
|
|
uint64_t waittime, const char *file, int line, int flags)
|
|
|
|
{
|
|
|
|
|
|
|
|
lock_profile_obtain_lock_success(&lk->lock_object, contested, waittime,
|
|
|
|
file, line);
|
|
|
|
LOCK_LOG_LOCK("SLOCK", &lk->lock_object, 0, 0, file, line);
|
|
|
|
WITNESS_LOCK(&lk->lock_object, LK_TRYWIT(flags), file, line);
|
|
|
|
TD_LOCKS_INC(curthread);
|
|
|
|
TD_SLOCKS_INC(curthread);
|
|
|
|
STACK_SAVE(lk);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
lockmgr_note_shared_release(struct lock *lk, const char *file, int line)
|
|
|
|
{
|
|
|
|
|
|
|
|
lock_profile_release_lock(&lk->lock_object);
|
|
|
|
WITNESS_UNLOCK(&lk->lock_object, 0, file, line);
|
|
|
|
LOCK_LOG_LOCK("SUNLOCK", &lk->lock_object, 0, 0, file, line);
|
|
|
|
TD_LOCKS_DEC(curthread);
|
|
|
|
TD_SLOCKS_DEC(curthread);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
lockmgr_note_exclusive_acquire(struct lock *lk, int contested,
|
|
|
|
uint64_t waittime, const char *file, int line, int flags)
|
|
|
|
{
|
|
|
|
|
|
|
|
lock_profile_obtain_lock_success(&lk->lock_object, contested, waittime,
|
|
|
|
file, line);
|
|
|
|
LOCK_LOG_LOCK("XLOCK", &lk->lock_object, 0, lk->lk_recurse, file, line);
|
|
|
|
WITNESS_LOCK(&lk->lock_object, LOP_EXCLUSIVE | LK_TRYWIT(flags), file,
|
|
|
|
line);
|
|
|
|
TD_LOCKS_INC(curthread);
|
|
|
|
STACK_SAVE(lk);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
lockmgr_note_exclusive_release(struct lock *lk, const char *file, int line)
|
|
|
|
{
|
|
|
|
|
|
|
|
lock_profile_release_lock(&lk->lock_object);
|
|
|
|
LOCK_LOG_LOCK("XUNLOCK", &lk->lock_object, 0, lk->lk_recurse, file,
|
|
|
|
line);
|
|
|
|
WITNESS_UNLOCK(&lk->lock_object, LOP_EXCLUSIVE, file, line);
|
|
|
|
TD_LOCKS_DEC(curthread);
|
|
|
|
}
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
static __inline struct thread *
|
2011-11-16 21:51:17 +00:00
|
|
|
lockmgr_xholder(const struct lock *lk)
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
{
|
|
|
|
uintptr_t x;
|
|
|
|
|
|
|
|
x = lk->lk_lock;
|
|
|
|
return ((x & LK_SHARE) ? NULL : (struct thread *)LK_HOLDER(x));
|
|
|
|
}
|
2008-02-13 20:44:19 +00:00
|
|
|
|
1997-03-25 16:27:20 +00:00
|
|
|
/*
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
* It assumes sleepq_lock held and returns with this one unheld.
|
|
|
|
* It also assumes the generic interlock is sane and previously checked.
|
|
|
|
* If LK_INTERLOCK is specified the interlock is not reacquired after the
|
|
|
|
* sleep.
|
1997-03-25 16:27:20 +00:00
|
|
|
*/
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
static __inline int
|
|
|
|
sleeplk(struct lock *lk, u_int flags, struct lock_object *ilk,
|
|
|
|
const char *wmesg, int pri, int timo, int queue)
|
|
|
|
{
|
2008-04-12 19:57:30 +00:00
|
|
|
GIANT_DECLARE;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
struct lock_class *class;
|
|
|
|
int catch, error;
|
1997-03-25 16:27:20 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
class = (flags & LK_INTERLOCK) ? LOCK_CLASS(ilk) : NULL;
|
2008-05-25 16:11:27 +00:00
|
|
|
catch = pri & PCATCH;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
pri &= PRIMASK;
|
|
|
|
error = 0;
|
|
|
|
|
|
|
|
LOCK_LOG3(lk, "%s: %p blocking on the %s sleepqueue", __func__, lk,
|
|
|
|
(queue == SQ_EXCLUSIVE_QUEUE) ? "exclusive" : "shared");
|
|
|
|
|
|
|
|
if (flags & LK_INTERLOCK)
|
|
|
|
class->lc_unlock(ilk);
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
if (queue == SQ_EXCLUSIVE_QUEUE && (flags & LK_SLEEPFAIL) != 0)
|
|
|
|
lk->lk_exslpfail++;
|
2008-04-12 19:57:30 +00:00
|
|
|
GIANT_SAVE();
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
sleepq_add(&lk->lock_object, NULL, wmesg, SLEEPQ_LK | (catch ?
|
|
|
|
SLEEPQ_INTERRUPTIBLE : 0), queue);
|
2015-01-22 11:12:42 +00:00
|
|
|
if ((flags & LK_TIMELOCK) && timo)
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
sleepq_set_timeout(&lk->lock_object, timo);
|
2015-01-22 11:12:42 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
/*
|
|
|
|
* Decisional switch for real sleeping.
|
|
|
|
*/
|
|
|
|
if ((flags & LK_TIMELOCK) && timo && catch)
|
|
|
|
error = sleepq_timedwait_sig(&lk->lock_object, pri);
|
|
|
|
else if ((flags & LK_TIMELOCK) && timo)
|
|
|
|
error = sleepq_timedwait(&lk->lock_object, pri);
|
|
|
|
else if (catch)
|
|
|
|
error = sleepq_wait_sig(&lk->lock_object, pri);
|
|
|
|
else
|
|
|
|
sleepq_wait(&lk->lock_object, pri);
|
2008-04-12 19:57:30 +00:00
|
|
|
GIANT_RESTORE();
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if ((flags & LK_SLEEPFAIL) && error == 0)
|
|
|
|
error = ENOLCK;
|
|
|
|
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
If a thread that is swapped out is made runnable, then the setrunnable()
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
2008-08-05 20:02:31 +00:00
|
|
|
static __inline int
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
wakeupshlk(struct lock *lk, const char *file, int line)
|
|
|
|
{
|
2018-03-05 00:30:07 +00:00
|
|
|
uintptr_t v, x, orig_x;
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
u_int realexslp;
|
If a thread that is swapped out is made runnable, then the setrunnable()
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
2008-08-05 20:02:31 +00:00
|
|
|
int queue, wakeup_swapper;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
If a thread that is swapped out is made runnable, then the setrunnable()
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
2008-08-05 20:02:31 +00:00
|
|
|
wakeup_swapper = 0;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
for (;;) {
|
|
|
|
x = lk->lk_lock;
|
2018-03-04 19:12:54 +00:00
|
|
|
if (lockmgr_sunlock_try(lk, &x))
|
2017-02-12 09:49:44 +00:00
|
|
|
break;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* We should have a sharer with waiters, so enter the hard
|
|
|
|
* path in order to handle wakeups correctly.
|
|
|
|
*/
|
|
|
|
sleepq_lock(&lk->lock_object);
|
2018-03-05 00:30:07 +00:00
|
|
|
orig_x = lk->lk_lock;
|
|
|
|
retry_sleepq:
|
|
|
|
x = orig_x & (LK_ALL_WAITERS | LK_EXCLUSIVE_SPINNERS);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
v = LK_UNLOCKED;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the lock has exclusive waiters, give them preference in
|
|
|
|
* order to avoid deadlock with shared runners up.
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
* If interruptible sleeps left the exclusive queue empty
|
|
|
|
* avoid a starvation for the threads sleeping on the shared
|
|
|
|
* queue by giving them precedence and cleaning up the
|
|
|
|
* exclusive waiters bit anyway.
|
2010-01-07 01:19:01 +00:00
|
|
|
* Please note that lk_exslpfail count may be lying about
|
|
|
|
* the real number of waiters with the LK_SLEEPFAIL flag on
|
2016-04-29 22:15:33 +00:00
|
|
|
* because they may be used in conjunction with interruptible
|
2010-01-07 01:24:09 +00:00
|
|
|
* sleeps so lk_exslpfail might be considered an 'upper limit'
|
|
|
|
* bound, including the edge cases.
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
*/
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
realexslp = sleepq_sleepcnt(&lk->lock_object,
|
|
|
|
SQ_EXCLUSIVE_QUEUE);
|
|
|
|
if ((x & LK_EXCLUSIVE_WAITERS) != 0 && realexslp != 0) {
|
|
|
|
if (lk->lk_exslpfail < realexslp) {
|
|
|
|
lk->lk_exslpfail = 0;
|
|
|
|
queue = SQ_EXCLUSIVE_QUEUE;
|
|
|
|
v |= (x & LK_SHARED_WAITERS);
|
|
|
|
} else {
|
|
|
|
lk->lk_exslpfail = 0;
|
|
|
|
LOCK_LOG2(lk,
|
|
|
|
"%s: %p has only LK_SLEEPFAIL sleepers",
|
|
|
|
__func__, lk);
|
|
|
|
LOCK_LOG2(lk,
|
|
|
|
"%s: %p waking up threads on the exclusive queue",
|
|
|
|
__func__, lk);
|
|
|
|
wakeup_swapper =
|
|
|
|
sleepq_broadcast(&lk->lock_object,
|
|
|
|
SLEEPQ_LK, 0, SQ_EXCLUSIVE_QUEUE);
|
|
|
|
queue = SQ_SHARED_QUEUE;
|
|
|
|
}
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
} else {
|
2010-01-07 00:47:50 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Exclusive waiters sleeping with LK_SLEEPFAIL on
|
|
|
|
* and using interruptible sleeps/timeout may have
|
|
|
|
* left spourious lk_exslpfail counts on, so clean
|
|
|
|
* it up anyway.
|
|
|
|
*/
|
|
|
|
lk->lk_exslpfail = 0;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
queue = SQ_SHARED_QUEUE;
|
|
|
|
}
|
|
|
|
|
2018-03-05 00:30:07 +00:00
|
|
|
if (lockmgr_sunlock_try(lk, &orig_x)) {
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
sleepq_release(&lk->lock_object);
|
2018-03-05 00:30:07 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
x |= LK_SHARERS_LOCK(1);
|
|
|
|
if (!atomic_fcmpset_rel_ptr(&lk->lk_lock, &x, v)) {
|
|
|
|
orig_x = x;
|
|
|
|
goto retry_sleepq;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
}
|
|
|
|
LOCK_LOG3(lk, "%s: %p waking up threads on the %s queue",
|
|
|
|
__func__, lk, queue == SQ_SHARED_QUEUE ? "shared" :
|
|
|
|
"exclusive");
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
wakeup_swapper |= sleepq_broadcast(&lk->lock_object, SLEEPQ_LK,
|
If a thread that is swapped out is made runnable, then the setrunnable()
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
2008-08-05 20:02:31 +00:00
|
|
|
0, queue);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
sleepq_release(&lk->lock_object);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2017-02-12 09:49:44 +00:00
|
|
|
lockmgr_note_shared_release(lk, file, line);
|
If a thread that is swapped out is made runnable, then the setrunnable()
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
2008-08-05 20:02:31 +00:00
|
|
|
return (wakeup_swapper);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2011-11-16 21:51:17 +00:00
|
|
|
assert_lockmgr(const struct lock_object *lock, int what)
|
2007-11-18 14:43:53 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
panic("lockmgr locks do not support assertions");
|
|
|
|
}
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
static void
|
2013-09-20 23:06:21 +00:00
|
|
|
lock_lockmgr(struct lock_object *lock, uintptr_t how)
|
2007-03-09 16:27:11 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
panic("lockmgr locks do not support sleep interlocking");
|
|
|
|
}
|
|
|
|
|
2013-09-20 23:06:21 +00:00
|
|
|
static uintptr_t
|
2007-03-09 16:27:11 +00:00
|
|
|
unlock_lockmgr(struct lock_object *lock)
|
|
|
|
{
|
|
|
|
|
|
|
|
panic("lockmgr locks do not support sleep interlocking");
|
|
|
|
}
|
|
|
|
|
2009-05-26 20:28:22 +00:00
|
|
|
#ifdef KDTRACE_HOOKS
|
|
|
|
static int
|
2011-11-16 21:51:17 +00:00
|
|
|
owner_lockmgr(const struct lock_object *lock, struct thread **owner)
|
2009-05-26 20:28:22 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
panic("lockmgr locks do not support owner inquiring");
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
void
|
|
|
|
lockinit(struct lock *lk, int pri, const char *wmesg, int timo, int flags)
|
|
|
|
{
|
|
|
|
int iflags;
|
1997-09-21 04:24:27 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
MPASS((flags & ~LK_INIT_MASK) == 0);
|
2009-08-17 16:17:21 +00:00
|
|
|
ASSERT_ATOMIC_LOAD_PTR(lk->lk_lock,
|
|
|
|
("%s: lockmgr not aligned for %s: %p", __func__, wmesg,
|
|
|
|
&lk->lk_lock));
|
1997-03-25 16:27:20 +00:00
|
|
|
|
2009-06-02 13:03:35 +00:00
|
|
|
iflags = LO_SLEEPABLE | LO_UPGRADABLE;
|
|
|
|
if (flags & LK_CANRECURSE)
|
|
|
|
iflags |= LO_RECURSABLE;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if ((flags & LK_NODUP) == 0)
|
|
|
|
iflags |= LO_DUPOK;
|
|
|
|
if (flags & LK_NOPROFILE)
|
|
|
|
iflags |= LO_NOPROFILE;
|
|
|
|
if ((flags & LK_NOWITNESS) == 0)
|
|
|
|
iflags |= LO_WITNESS;
|
|
|
|
if (flags & LK_QUIET)
|
|
|
|
iflags |= LO_QUIET;
|
2013-05-09 16:28:18 +00:00
|
|
|
if (flags & LK_IS_VNODE)
|
|
|
|
iflags |= LO_IS_VNODE;
|
Introduce support for adaptive spinning in lockmgr.
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
2009-06-17 01:55:42 +00:00
|
|
|
iflags |= flags & (LK_ADAPTIVE | LK_NOSHARE);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
2013-06-25 20:23:08 +00:00
|
|
|
lock_init(&lk->lock_object, &lock_class_lockmgr, wmesg, NULL, iflags);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lk_lock = LK_UNLOCKED;
|
|
|
|
lk->lk_recurse = 0;
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
lk->lk_exslpfail = 0;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lk_timo = timo;
|
|
|
|
lk->lk_pri = pri;
|
|
|
|
STACK_ZERO(lk);
|
1997-08-18 02:06:35 +00:00
|
|
|
}
|
|
|
|
|
2010-08-20 19:46:50 +00:00
|
|
|
/*
|
|
|
|
* XXX: Gross hacks to manipulate external lock flags after
|
|
|
|
* initialization. Used for certain vnode and buf locks.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
lockallowshare(struct lock *lk)
|
|
|
|
{
|
|
|
|
|
|
|
|
lockmgr_assert(lk, KA_XLOCKED);
|
|
|
|
lk->lock_object.lo_flags &= ~LK_NOSHARE;
|
|
|
|
}
|
|
|
|
|
2014-08-29 09:02:01 +00:00
|
|
|
void
|
|
|
|
lockdisableshare(struct lock *lk)
|
|
|
|
{
|
|
|
|
|
|
|
|
lockmgr_assert(lk, KA_XLOCKED);
|
|
|
|
lk->lock_object.lo_flags |= LK_NOSHARE;
|
|
|
|
}
|
|
|
|
|
2010-08-20 19:46:50 +00:00
|
|
|
void
|
|
|
|
lockallowrecurse(struct lock *lk)
|
|
|
|
{
|
|
|
|
|
|
|
|
lockmgr_assert(lk, KA_XLOCKED);
|
|
|
|
lk->lock_object.lo_flags |= LO_RECURSABLE;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
lockdisablerecurse(struct lock *lk)
|
|
|
|
{
|
|
|
|
|
|
|
|
lockmgr_assert(lk, KA_XLOCKED);
|
|
|
|
lk->lock_object.lo_flags &= ~LO_RECURSABLE;
|
|
|
|
}
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
void
|
|
|
|
lockdestroy(struct lock *lk)
|
|
|
|
{
|
1997-03-25 16:27:20 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
KASSERT(lk->lk_lock == LK_UNLOCKED, ("lockmgr still held"));
|
|
|
|
KASSERT(lk->lk_recurse == 0, ("lockmgr still recursed"));
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
KASSERT(lk->lk_exslpfail == 0, ("lockmgr still exclusive waiters"));
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lock_destroy(&lk->lock_object);
|
1997-08-18 02:06:35 +00:00
|
|
|
}
|
1997-03-25 16:27:20 +00:00
|
|
|
|
2017-02-12 09:49:44 +00:00
|
|
|
static bool __always_inline
|
|
|
|
lockmgr_slock_try(struct lock *lk, uintptr_t *xp, int flags)
|
|
|
|
{
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If no other thread has an exclusive lock, or
|
|
|
|
* no exclusive waiter is present, bump the count of
|
|
|
|
* sharers. Since we have to preserve the state of
|
|
|
|
* waiters, if we fail to acquire the shared lock
|
|
|
|
* loop back and retry.
|
|
|
|
*/
|
|
|
|
*xp = lk->lk_lock;
|
|
|
|
while (LK_CAN_SHARE(*xp, flags)) {
|
|
|
|
if (atomic_fcmpset_acq_ptr(&lk->lk_lock, xp,
|
|
|
|
*xp + LK_ONE_SHARER)) {
|
|
|
|
return (true);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return (false);
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool __always_inline
|
2018-03-04 19:12:54 +00:00
|
|
|
lockmgr_sunlock_try(struct lock *lk, uintptr_t *xp)
|
2017-02-12 09:49:44 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
/*
|
|
|
|
* If there is more than one shared lock held, just drop one
|
|
|
|
* and return.
|
|
|
|
*/
|
2018-03-04 19:12:54 +00:00
|
|
|
if (LK_SHARERS(*xp) > 1) {
|
|
|
|
if (atomic_fcmpset_rel_ptr(&lk->lk_lock, xp,
|
|
|
|
*xp - LK_ONE_SHARER))
|
2017-02-12 09:49:44 +00:00
|
|
|
return (true);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If there are not waiters on the exclusive queue, drop the
|
|
|
|
* lock quickly.
|
|
|
|
*/
|
2018-03-04 19:12:54 +00:00
|
|
|
if ((*xp & LK_ALL_WAITERS) == 0) {
|
|
|
|
MPASS((*xp & ~LK_EXCLUSIVE_SPINNERS) ==
|
2017-02-12 09:49:44 +00:00
|
|
|
LK_SHARERS_LOCK(1));
|
2018-03-04 19:12:54 +00:00
|
|
|
if (atomic_fcmpset_rel_ptr(&lk->lk_lock, xp,
|
2017-02-12 09:49:44 +00:00
|
|
|
LK_UNLOCKED))
|
|
|
|
return (true);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return (false);
|
|
|
|
}
|
|
|
|
|
2018-03-04 19:12:54 +00:00
|
|
|
static __noinline int
|
|
|
|
lockmgr_slock_hard(struct lock *lk, u_int flags, struct lock_object *ilk,
|
|
|
|
const char *file, int line, struct lockmgr_wait *lwa)
|
|
|
|
{
|
|
|
|
uintptr_t tid, x;
|
|
|
|
int error = 0;
|
|
|
|
const char *iwmesg;
|
|
|
|
int ipri, itimo;
|
|
|
|
|
|
|
|
#ifdef LOCK_PROFILING
|
|
|
|
uint64_t waittime = 0;
|
|
|
|
int contested = 0;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (__predict_false(panicstr != NULL))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
tid = (uintptr_t)curthread;
|
|
|
|
|
|
|
|
if (LK_CAN_WITNESS(flags))
|
|
|
|
WITNESS_CHECKORDER(&lk->lock_object, LOP_NEWORDER,
|
|
|
|
file, line, flags & LK_INTERLOCK ? ilk : NULL);
|
|
|
|
for (;;) {
|
|
|
|
if (lockmgr_slock_try(lk, &x, flags))
|
|
|
|
break;
|
|
|
|
#ifdef HWPMC_HOOKS
|
|
|
|
PMC_SOFT_CALL( , , lock, failed);
|
|
|
|
#endif
|
|
|
|
lock_profile_obtain_lock_failed(&lk->lock_object,
|
|
|
|
&contested, &waittime);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the lock is already held by curthread in
|
|
|
|
* exclusive way avoid a deadlock.
|
|
|
|
*/
|
|
|
|
if (LK_HOLDER(x) == tid) {
|
|
|
|
LOCK_LOG2(lk,
|
|
|
|
"%s: %p already held in exclusive mode",
|
|
|
|
__func__, lk);
|
|
|
|
error = EDEADLK;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the lock is expected to not sleep just give up
|
|
|
|
* and return.
|
|
|
|
*/
|
|
|
|
if (LK_TRYOP(flags)) {
|
|
|
|
LOCK_LOG2(lk, "%s: %p fails the try operation",
|
|
|
|
__func__, lk);
|
|
|
|
error = EBUSY;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Acquire the sleepqueue chain lock because we
|
|
|
|
* probabilly will need to manipulate waiters flags.
|
|
|
|
*/
|
|
|
|
sleepq_lock(&lk->lock_object);
|
|
|
|
x = lk->lk_lock;
|
2018-03-05 00:30:07 +00:00
|
|
|
retry_sleepq:
|
2018-03-04 19:12:54 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* if the lock can be acquired in shared mode, try
|
|
|
|
* again.
|
|
|
|
*/
|
|
|
|
if (LK_CAN_SHARE(x, flags)) {
|
|
|
|
sleepq_release(&lk->lock_object);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to set the LK_SHARED_WAITERS flag. If we fail,
|
|
|
|
* loop back and retry.
|
|
|
|
*/
|
|
|
|
if ((x & LK_SHARED_WAITERS) == 0) {
|
2018-03-05 00:30:07 +00:00
|
|
|
if (!atomic_fcmpset_acq_ptr(&lk->lk_lock, &x,
|
2018-03-04 19:12:54 +00:00
|
|
|
x | LK_SHARED_WAITERS)) {
|
2018-03-05 00:30:07 +00:00
|
|
|
goto retry_sleepq;
|
2018-03-04 19:12:54 +00:00
|
|
|
}
|
|
|
|
LOCK_LOG2(lk, "%s: %p set shared waiters flag",
|
|
|
|
__func__, lk);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (lwa == NULL) {
|
|
|
|
iwmesg = lk->lock_object.lo_name;
|
|
|
|
ipri = lk->lk_pri;
|
|
|
|
itimo = lk->lk_timo;
|
|
|
|
} else {
|
|
|
|
iwmesg = lwa->iwmesg;
|
|
|
|
ipri = lwa->ipri;
|
|
|
|
itimo = lwa->itimo;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* As far as we have been unable to acquire the
|
|
|
|
* shared lock and the shared waiters flag is set,
|
|
|
|
* we will sleep.
|
|
|
|
*/
|
|
|
|
error = sleeplk(lk, flags, ilk, iwmesg, ipri, itimo,
|
|
|
|
SQ_SHARED_QUEUE);
|
|
|
|
flags &= ~LK_INTERLOCK;
|
|
|
|
if (error) {
|
|
|
|
LOCK_LOG3(lk,
|
|
|
|
"%s: interrupted sleep for %p with %d",
|
|
|
|
__func__, lk, error);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
LOCK_LOG2(lk, "%s: %p resuming from the sleep queue",
|
|
|
|
__func__, lk);
|
|
|
|
}
|
|
|
|
if (error == 0) {
|
|
|
|
#ifdef LOCK_PROFILING
|
|
|
|
lockmgr_note_shared_acquire(lk, contested, waittime,
|
|
|
|
file, line, flags);
|
|
|
|
#else
|
|
|
|
lockmgr_note_shared_acquire(lk, 0, 0, file, line,
|
|
|
|
flags);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
lockmgr_exit(flags, ilk, 0);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __noinline int
|
|
|
|
lockmgr_xlock_hard(struct lock *lk, u_int flags, struct lock_object *ilk,
|
|
|
|
const char *file, int line, struct lockmgr_wait *lwa)
|
|
|
|
{
|
|
|
|
struct lock_class *class;
|
|
|
|
uintptr_t tid, x, v;
|
|
|
|
int error = 0;
|
|
|
|
const char *iwmesg;
|
|
|
|
int ipri, itimo;
|
|
|
|
|
|
|
|
#ifdef LOCK_PROFILING
|
|
|
|
uint64_t waittime = 0;
|
|
|
|
int contested = 0;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (__predict_false(panicstr != NULL))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
tid = (uintptr_t)curthread;
|
|
|
|
|
|
|
|
if (LK_CAN_WITNESS(flags))
|
|
|
|
WITNESS_CHECKORDER(&lk->lock_object, LOP_NEWORDER |
|
|
|
|
LOP_EXCLUSIVE, file, line, flags & LK_INTERLOCK ?
|
|
|
|
ilk : NULL);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If curthread already holds the lock and this one is
|
|
|
|
* allowed to recurse, simply recurse on it.
|
|
|
|
*/
|
|
|
|
if (lockmgr_xlocked(lk)) {
|
|
|
|
if ((flags & LK_CANRECURSE) == 0 &&
|
|
|
|
(lk->lock_object.lo_flags & LO_RECURSABLE) == 0) {
|
|
|
|
/*
|
|
|
|
* If the lock is expected to not panic just
|
|
|
|
* give up and return.
|
|
|
|
*/
|
|
|
|
if (LK_TRYOP(flags)) {
|
|
|
|
LOCK_LOG2(lk,
|
|
|
|
"%s: %p fails the try operation",
|
|
|
|
__func__, lk);
|
|
|
|
error = EBUSY;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
if (flags & LK_INTERLOCK) {
|
|
|
|
class = LOCK_CLASS(ilk);
|
|
|
|
class->lc_unlock(ilk);
|
|
|
|
}
|
2018-03-20 22:05:21 +00:00
|
|
|
panic("%s: recursing on non recursive lockmgr %p "
|
|
|
|
"@ %s:%d\n", __func__, lk, file, line);
|
2018-03-04 19:12:54 +00:00
|
|
|
}
|
|
|
|
lk->lk_recurse++;
|
|
|
|
LOCK_LOG2(lk, "%s: %p recursing", __func__, lk);
|
|
|
|
LOCK_LOG_LOCK("XLOCK", &lk->lock_object, 0,
|
|
|
|
lk->lk_recurse, file, line);
|
|
|
|
WITNESS_LOCK(&lk->lock_object, LOP_EXCLUSIVE |
|
|
|
|
LK_TRYWIT(flags), file, line);
|
|
|
|
TD_LOCKS_INC(curthread);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
if (lk->lk_lock == LK_UNLOCKED &&
|
|
|
|
atomic_cmpset_acq_ptr(&lk->lk_lock, LK_UNLOCKED, tid))
|
|
|
|
break;
|
|
|
|
#ifdef HWPMC_HOOKS
|
|
|
|
PMC_SOFT_CALL( , , lock, failed);
|
|
|
|
#endif
|
|
|
|
lock_profile_obtain_lock_failed(&lk->lock_object,
|
|
|
|
&contested, &waittime);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the lock is expected to not sleep just give up
|
|
|
|
* and return.
|
|
|
|
*/
|
|
|
|
if (LK_TRYOP(flags)) {
|
|
|
|
LOCK_LOG2(lk, "%s: %p fails the try operation",
|
|
|
|
__func__, lk);
|
|
|
|
error = EBUSY;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Acquire the sleepqueue chain lock because we
|
|
|
|
* probabilly will need to manipulate waiters flags.
|
|
|
|
*/
|
|
|
|
sleepq_lock(&lk->lock_object);
|
|
|
|
x = lk->lk_lock;
|
2018-03-05 00:30:07 +00:00
|
|
|
retry_sleepq:
|
2018-03-04 19:12:54 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* if the lock has been released while we spun on
|
|
|
|
* the sleepqueue chain lock just try again.
|
|
|
|
*/
|
|
|
|
if (x == LK_UNLOCKED) {
|
|
|
|
sleepq_release(&lk->lock_object);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The lock can be in the state where there is a
|
|
|
|
* pending queue of waiters, but still no owner.
|
|
|
|
* This happens when the lock is contested and an
|
|
|
|
* owner is going to claim the lock.
|
|
|
|
* If curthread is the one successfully acquiring it
|
|
|
|
* claim lock ownership and return, preserving waiters
|
|
|
|
* flags.
|
|
|
|
*/
|
|
|
|
v = x & (LK_ALL_WAITERS | LK_EXCLUSIVE_SPINNERS);
|
|
|
|
if ((x & ~v) == LK_UNLOCKED) {
|
|
|
|
v &= ~LK_EXCLUSIVE_SPINNERS;
|
2018-03-05 00:30:07 +00:00
|
|
|
if (atomic_fcmpset_acq_ptr(&lk->lk_lock, &x,
|
2018-03-04 19:12:54 +00:00
|
|
|
tid | v)) {
|
|
|
|
sleepq_release(&lk->lock_object);
|
|
|
|
LOCK_LOG2(lk,
|
|
|
|
"%s: %p claimed by a new writer",
|
|
|
|
__func__, lk);
|
|
|
|
break;
|
|
|
|
}
|
2018-03-05 00:30:07 +00:00
|
|
|
goto retry_sleepq;
|
2018-03-04 19:12:54 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to set the LK_EXCLUSIVE_WAITERS flag. If we
|
|
|
|
* fail, loop back and retry.
|
|
|
|
*/
|
|
|
|
if ((x & LK_EXCLUSIVE_WAITERS) == 0) {
|
2018-03-05 00:30:07 +00:00
|
|
|
if (!atomic_fcmpset_ptr(&lk->lk_lock, &x,
|
2018-03-04 19:12:54 +00:00
|
|
|
x | LK_EXCLUSIVE_WAITERS)) {
|
2018-03-05 00:30:07 +00:00
|
|
|
goto retry_sleepq;
|
2018-03-04 19:12:54 +00:00
|
|
|
}
|
|
|
|
LOCK_LOG2(lk, "%s: %p set excl waiters flag",
|
|
|
|
__func__, lk);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (lwa == NULL) {
|
|
|
|
iwmesg = lk->lock_object.lo_name;
|
|
|
|
ipri = lk->lk_pri;
|
|
|
|
itimo = lk->lk_timo;
|
|
|
|
} else {
|
|
|
|
iwmesg = lwa->iwmesg;
|
|
|
|
ipri = lwa->ipri;
|
|
|
|
itimo = lwa->itimo;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* As far as we have been unable to acquire the
|
|
|
|
* exclusive lock and the exclusive waiters flag
|
|
|
|
* is set, we will sleep.
|
|
|
|
*/
|
|
|
|
error = sleeplk(lk, flags, ilk, iwmesg, ipri, itimo,
|
|
|
|
SQ_EXCLUSIVE_QUEUE);
|
|
|
|
flags &= ~LK_INTERLOCK;
|
|
|
|
if (error) {
|
|
|
|
LOCK_LOG3(lk,
|
|
|
|
"%s: interrupted sleep for %p with %d",
|
|
|
|
__func__, lk, error);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
LOCK_LOG2(lk, "%s: %p resuming from the sleep queue",
|
|
|
|
__func__, lk);
|
|
|
|
}
|
|
|
|
if (error == 0) {
|
|
|
|
#ifdef LOCK_PROFILING
|
|
|
|
lockmgr_note_exclusive_acquire(lk, contested, waittime,
|
|
|
|
file, line, flags);
|
|
|
|
#else
|
|
|
|
lockmgr_note_exclusive_acquire(lk, 0, 0, file, line,
|
|
|
|
flags);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
lockmgr_exit(flags, ilk, 0);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __noinline int
|
|
|
|
lockmgr_upgrade(struct lock *lk, u_int flags, struct lock_object *ilk,
|
|
|
|
const char *file, int line, struct lockmgr_wait *lwa)
|
|
|
|
{
|
|
|
|
uintptr_t tid, x, v;
|
|
|
|
int error = 0;
|
|
|
|
int wakeup_swapper = 0;
|
|
|
|
int op;
|
|
|
|
|
|
|
|
if (__predict_false(panicstr != NULL))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
tid = (uintptr_t)curthread;
|
|
|
|
|
|
|
|
_lockmgr_assert(lk, KA_SLOCKED, file, line);
|
|
|
|
v = lk->lk_lock;
|
|
|
|
x = v & LK_ALL_WAITERS;
|
|
|
|
v &= LK_EXCLUSIVE_SPINNERS;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to switch from one shared lock to an exclusive one.
|
|
|
|
* We need to preserve waiters flags during the operation.
|
|
|
|
*/
|
|
|
|
if (atomic_cmpset_ptr(&lk->lk_lock, LK_SHARERS_LOCK(1) | x | v,
|
|
|
|
tid | x)) {
|
|
|
|
LOCK_LOG_LOCK("XUPGRADE", &lk->lock_object, 0, 0, file,
|
|
|
|
line);
|
|
|
|
WITNESS_UPGRADE(&lk->lock_object, LOP_EXCLUSIVE |
|
|
|
|
LK_TRYWIT(flags), file, line);
|
|
|
|
TD_SLOCKS_DEC(curthread);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
op = flags & LK_TYPE_MASK;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* In LK_TRYUPGRADE mode, do not drop the lock,
|
|
|
|
* returning EBUSY instead.
|
|
|
|
*/
|
|
|
|
if (op == LK_TRYUPGRADE) {
|
|
|
|
LOCK_LOG2(lk, "%s: %p failed the nowait upgrade",
|
|
|
|
__func__, lk);
|
|
|
|
error = EBUSY;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We have been unable to succeed in upgrading, so just
|
|
|
|
* give up the shared lock.
|
|
|
|
*/
|
|
|
|
wakeup_swapper |= wakeupshlk(lk, file, line);
|
|
|
|
error = lockmgr_xlock_hard(lk, flags, ilk, file, line, lwa);
|
|
|
|
flags &= ~LK_INTERLOCK;
|
|
|
|
out:
|
|
|
|
lockmgr_exit(flags, ilk, wakeup_swapper);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
2017-02-12 09:49:44 +00:00
|
|
|
int
|
|
|
|
lockmgr_lock_fast_path(struct lock *lk, u_int flags, struct lock_object *ilk,
|
|
|
|
const char *file, int line)
|
|
|
|
{
|
|
|
|
struct lock_class *class;
|
2018-03-04 19:12:54 +00:00
|
|
|
uintptr_t x, tid;
|
2017-02-12 09:49:44 +00:00
|
|
|
u_int op;
|
|
|
|
bool locked;
|
|
|
|
|
2018-04-24 18:41:14 +00:00
|
|
|
if (__predict_false(panicstr != NULL))
|
|
|
|
return (0);
|
|
|
|
|
2017-02-12 09:49:44 +00:00
|
|
|
op = flags & LK_TYPE_MASK;
|
|
|
|
locked = false;
|
|
|
|
switch (op) {
|
|
|
|
case LK_SHARED:
|
|
|
|
if (LK_CAN_WITNESS(flags))
|
|
|
|
WITNESS_CHECKORDER(&lk->lock_object, LOP_NEWORDER,
|
|
|
|
file, line, flags & LK_INTERLOCK ? ilk : NULL);
|
|
|
|
if (__predict_false(lk->lock_object.lo_flags & LK_NOSHARE))
|
|
|
|
break;
|
|
|
|
if (lockmgr_slock_try(lk, &x, flags)) {
|
|
|
|
lockmgr_note_shared_acquire(lk, 0, 0,
|
|
|
|
file, line, flags);
|
|
|
|
locked = true;
|
2018-03-04 19:12:54 +00:00
|
|
|
} else {
|
|
|
|
return (lockmgr_slock_hard(lk, flags, ilk, file, line,
|
|
|
|
NULL));
|
2017-02-12 09:49:44 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case LK_EXCLUSIVE:
|
|
|
|
if (LK_CAN_WITNESS(flags))
|
|
|
|
WITNESS_CHECKORDER(&lk->lock_object, LOP_NEWORDER |
|
|
|
|
LOP_EXCLUSIVE, file, line, flags & LK_INTERLOCK ?
|
|
|
|
ilk : NULL);
|
|
|
|
tid = (uintptr_t)curthread;
|
|
|
|
if (lk->lk_lock == LK_UNLOCKED &&
|
|
|
|
atomic_cmpset_acq_ptr(&lk->lk_lock, LK_UNLOCKED, tid)) {
|
|
|
|
lockmgr_note_exclusive_acquire(lk, 0, 0, file, line,
|
|
|
|
flags);
|
|
|
|
locked = true;
|
2018-03-04 19:12:54 +00:00
|
|
|
} else {
|
|
|
|
return (lockmgr_xlock_hard(lk, flags, ilk, file, line,
|
|
|
|
NULL));
|
2017-02-12 09:49:44 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case LK_UPGRADE:
|
|
|
|
case LK_TRYUPGRADE:
|
2018-03-04 19:12:54 +00:00
|
|
|
return (lockmgr_upgrade(lk, flags, ilk, file, line, NULL));
|
2017-02-12 09:49:44 +00:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (__predict_true(locked)) {
|
|
|
|
if (__predict_false(flags & LK_INTERLOCK)) {
|
|
|
|
class = LOCK_CLASS(ilk);
|
|
|
|
class->lc_unlock(ilk);
|
|
|
|
}
|
|
|
|
return (0);
|
|
|
|
} else {
|
|
|
|
return (__lockmgr_args(lk, flags, ilk, LK_WMESG_DEFAULT,
|
|
|
|
LK_PRIO_DEFAULT, LK_TIMO_DEFAULT, file, line));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-03-04 19:12:54 +00:00
|
|
|
static __noinline int
|
|
|
|
lockmgr_sunlock_hard(struct lock *lk, uintptr_t x, u_int flags, struct lock_object *ilk,
|
|
|
|
const char *file, int line)
|
|
|
|
|
|
|
|
{
|
|
|
|
int wakeup_swapper = 0;
|
|
|
|
|
|
|
|
if (__predict_false(panicstr != NULL))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
wakeup_swapper = wakeupshlk(lk, file, line);
|
|
|
|
|
|
|
|
out:
|
|
|
|
lockmgr_exit(flags, ilk, wakeup_swapper);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __noinline int
|
|
|
|
lockmgr_xunlock_hard(struct lock *lk, uintptr_t x, u_int flags, struct lock_object *ilk,
|
|
|
|
const char *file, int line)
|
|
|
|
{
|
|
|
|
uintptr_t tid, v;
|
|
|
|
int wakeup_swapper = 0;
|
|
|
|
u_int realexslp;
|
|
|
|
int queue;
|
|
|
|
|
|
|
|
if (__predict_false(panicstr != NULL))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
tid = (uintptr_t)curthread;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* As first option, treact the lock as if it has not
|
|
|
|
* any waiter.
|
|
|
|
* Fix-up the tid var if the lock has been disowned.
|
|
|
|
*/
|
|
|
|
if (LK_HOLDER(x) == LK_KERNPROC)
|
|
|
|
tid = LK_KERNPROC;
|
|
|
|
else {
|
|
|
|
WITNESS_UNLOCK(&lk->lock_object, LOP_EXCLUSIVE, file, line);
|
|
|
|
TD_LOCKS_DEC(curthread);
|
|
|
|
}
|
|
|
|
LOCK_LOG_LOCK("XUNLOCK", &lk->lock_object, 0, lk->lk_recurse, file, line);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The lock is held in exclusive mode.
|
|
|
|
* If the lock is recursed also, then unrecurse it.
|
|
|
|
*/
|
2018-05-18 22:57:52 +00:00
|
|
|
if (lockmgr_xlocked_v(x) && lockmgr_recursed(lk)) {
|
2018-03-04 19:12:54 +00:00
|
|
|
LOCK_LOG2(lk, "%s: %p unrecursing", __func__, lk);
|
|
|
|
lk->lk_recurse--;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
if (tid != LK_KERNPROC)
|
|
|
|
lock_profile_release_lock(&lk->lock_object);
|
|
|
|
|
2018-05-18 22:57:52 +00:00
|
|
|
if (x == tid && atomic_cmpset_rel_ptr(&lk->lk_lock, tid, LK_UNLOCKED))
|
2018-03-04 19:12:54 +00:00
|
|
|
goto out;
|
|
|
|
|
|
|
|
sleepq_lock(&lk->lock_object);
|
|
|
|
x = lk->lk_lock;
|
|
|
|
v = LK_UNLOCKED;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the lock has exclusive waiters, give them
|
|
|
|
* preference in order to avoid deadlock with
|
|
|
|
* shared runners up.
|
|
|
|
* If interruptible sleeps left the exclusive queue
|
|
|
|
* empty avoid a starvation for the threads sleeping
|
|
|
|
* on the shared queue by giving them precedence
|
|
|
|
* and cleaning up the exclusive waiters bit anyway.
|
|
|
|
* Please note that lk_exslpfail count may be lying
|
|
|
|
* about the real number of waiters with the
|
|
|
|
* LK_SLEEPFAIL flag on because they may be used in
|
|
|
|
* conjunction with interruptible sleeps so
|
|
|
|
* lk_exslpfail might be considered an 'upper limit'
|
|
|
|
* bound, including the edge cases.
|
|
|
|
*/
|
|
|
|
MPASS((x & LK_EXCLUSIVE_SPINNERS) == 0);
|
|
|
|
realexslp = sleepq_sleepcnt(&lk->lock_object, SQ_EXCLUSIVE_QUEUE);
|
|
|
|
if ((x & LK_EXCLUSIVE_WAITERS) != 0 && realexslp != 0) {
|
|
|
|
if (lk->lk_exslpfail < realexslp) {
|
|
|
|
lk->lk_exslpfail = 0;
|
|
|
|
queue = SQ_EXCLUSIVE_QUEUE;
|
|
|
|
v |= (x & LK_SHARED_WAITERS);
|
|
|
|
} else {
|
|
|
|
lk->lk_exslpfail = 0;
|
|
|
|
LOCK_LOG2(lk,
|
|
|
|
"%s: %p has only LK_SLEEPFAIL sleepers",
|
|
|
|
__func__, lk);
|
|
|
|
LOCK_LOG2(lk,
|
|
|
|
"%s: %p waking up threads on the exclusive queue",
|
|
|
|
__func__, lk);
|
|
|
|
wakeup_swapper = sleepq_broadcast(&lk->lock_object,
|
|
|
|
SLEEPQ_LK, 0, SQ_EXCLUSIVE_QUEUE);
|
|
|
|
queue = SQ_SHARED_QUEUE;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Exclusive waiters sleeping with LK_SLEEPFAIL
|
|
|
|
* on and using interruptible sleeps/timeout
|
|
|
|
* may have left spourious lk_exslpfail counts
|
|
|
|
* on, so clean it up anyway.
|
|
|
|
*/
|
|
|
|
lk->lk_exslpfail = 0;
|
|
|
|
queue = SQ_SHARED_QUEUE;
|
|
|
|
}
|
|
|
|
|
|
|
|
LOCK_LOG3(lk, "%s: %p waking up threads on the %s queue",
|
|
|
|
__func__, lk, queue == SQ_SHARED_QUEUE ? "shared" :
|
|
|
|
"exclusive");
|
|
|
|
atomic_store_rel_ptr(&lk->lk_lock, v);
|
|
|
|
wakeup_swapper |= sleepq_broadcast(&lk->lock_object, SLEEPQ_LK, 0, queue);
|
|
|
|
sleepq_release(&lk->lock_object);
|
|
|
|
|
|
|
|
out:
|
|
|
|
lockmgr_exit(flags, ilk, wakeup_swapper);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
2017-02-12 09:49:44 +00:00
|
|
|
int
|
|
|
|
lockmgr_unlock_fast_path(struct lock *lk, u_int flags, struct lock_object *ilk)
|
|
|
|
{
|
|
|
|
struct lock_class *class;
|
|
|
|
uintptr_t x, tid;
|
|
|
|
const char *file;
|
|
|
|
int line;
|
|
|
|
|
2018-04-24 18:41:14 +00:00
|
|
|
if (__predict_false(panicstr != NULL))
|
|
|
|
return (0);
|
|
|
|
|
2017-02-12 09:49:44 +00:00
|
|
|
file = __FILE__;
|
|
|
|
line = __LINE__;
|
|
|
|
|
|
|
|
_lockmgr_assert(lk, KA_LOCKED, file, line);
|
|
|
|
x = lk->lk_lock;
|
|
|
|
if (__predict_true(x & LK_SHARE) != 0) {
|
2018-03-04 19:12:54 +00:00
|
|
|
if (lockmgr_sunlock_try(lk, &x)) {
|
2017-02-12 09:49:44 +00:00
|
|
|
lockmgr_note_shared_release(lk, file, line);
|
2018-03-04 19:12:54 +00:00
|
|
|
} else {
|
|
|
|
return (lockmgr_sunlock_hard(lk, x, flags, ilk, file, line));
|
2017-02-12 09:49:44 +00:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
tid = (uintptr_t)curthread;
|
|
|
|
if (!lockmgr_recursed(lk) &&
|
|
|
|
atomic_cmpset_rel_ptr(&lk->lk_lock, tid, LK_UNLOCKED)) {
|
|
|
|
lockmgr_note_exclusive_release(lk, file, line);
|
2018-03-04 19:12:54 +00:00
|
|
|
} else {
|
|
|
|
return (lockmgr_xunlock_hard(lk, x, flags, ilk, file, line));
|
2017-02-12 09:49:44 +00:00
|
|
|
}
|
|
|
|
}
|
2018-03-04 19:12:54 +00:00
|
|
|
if (__predict_false(flags & LK_INTERLOCK)) {
|
|
|
|
class = LOCK_CLASS(ilk);
|
|
|
|
class->lc_unlock(ilk);
|
2017-02-12 09:49:44 +00:00
|
|
|
}
|
2018-03-04 19:12:54 +00:00
|
|
|
return (0);
|
2017-02-12 09:49:44 +00:00
|
|
|
}
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
int
|
|
|
|
__lockmgr_args(struct lock *lk, u_int flags, struct lock_object *ilk,
|
|
|
|
const char *wmesg, int pri, int timo, const char *file, int line)
|
2005-01-24 10:20:59 +00:00
|
|
|
{
|
2008-04-12 19:57:30 +00:00
|
|
|
GIANT_DECLARE;
|
2018-03-04 19:12:54 +00:00
|
|
|
struct lockmgr_wait lwa;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
struct lock_class *class;
|
2008-02-15 21:04:36 +00:00
|
|
|
const char *iwmesg;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
uintptr_t tid, v, x;
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
u_int op, realexslp;
|
2009-03-15 08:03:54 +00:00
|
|
|
int error, ipri, itimo, queue, wakeup_swapper;
|
|
|
|
#ifdef LOCK_PROFILING
|
|
|
|
uint64_t waittime = 0;
|
|
|
|
int contested = 0;
|
|
|
|
#endif
|
2008-02-15 21:04:36 +00:00
|
|
|
|
2018-04-24 18:41:14 +00:00
|
|
|
if (panicstr != NULL)
|
|
|
|
return (0);
|
|
|
|
|
2005-04-03 11:49:02 +00:00
|
|
|
error = 0;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
tid = (uintptr_t)curthread;
|
|
|
|
op = (flags & LK_TYPE_MASK);
|
|
|
|
iwmesg = (wmesg == LK_WMESG_DEFAULT) ? lk->lock_object.lo_name : wmesg;
|
|
|
|
ipri = (pri == LK_PRIO_DEFAULT) ? lk->lk_pri : pri;
|
|
|
|
itimo = (timo == LK_TIMO_DEFAULT) ? lk->lk_timo : timo;
|
|
|
|
|
2018-03-04 19:12:54 +00:00
|
|
|
lwa.iwmesg = iwmesg;
|
|
|
|
lwa.ipri = ipri;
|
|
|
|
lwa.itimo = itimo;
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
MPASS((flags & ~LK_TOTAL_MASK) == 0);
|
2008-04-12 13:56:17 +00:00
|
|
|
KASSERT((op & (op - 1)) == 0,
|
|
|
|
("%s: Invalid requested operation @ %s:%d", __func__, file, line));
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
KASSERT((flags & (LK_NOWAIT | LK_SLEEPFAIL)) == 0 ||
|
|
|
|
(op != LK_DOWNGRADE && op != LK_RELEASE),
|
|
|
|
("%s: Invalid flags in regard of the operation desired @ %s:%d",
|
|
|
|
__func__, file, line));
|
|
|
|
KASSERT((flags & LK_INTERLOCK) == 0 || ilk != NULL,
|
|
|
|
("%s: LK_INTERLOCK passed without valid interlock @ %s:%d",
|
|
|
|
__func__, file, line));
|
2012-12-22 09:37:34 +00:00
|
|
|
KASSERT(kdb_active != 0 || !TD_IS_IDLETHREAD(curthread),
|
2012-09-12 22:10:53 +00:00
|
|
|
("%s: idle thread %p on lockmgr %s @ %s:%d", __func__, curthread,
|
|
|
|
lk->lock_object.lo_name, file, line));
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
|
|
|
class = (flags & LK_INTERLOCK) ? LOCK_CLASS(ilk) : NULL;
|
1997-08-18 02:06:35 +00:00
|
|
|
|
2011-08-01 19:07:03 +00:00
|
|
|
if (lk->lock_object.lo_flags & LK_NOSHARE) {
|
|
|
|
switch (op) {
|
|
|
|
case LK_SHARED:
|
|
|
|
op = LK_EXCLUSIVE;
|
|
|
|
break;
|
|
|
|
case LK_UPGRADE:
|
2013-09-29 18:02:23 +00:00
|
|
|
case LK_TRYUPGRADE:
|
2011-08-01 19:07:03 +00:00
|
|
|
case LK_DOWNGRADE:
|
|
|
|
_lockmgr_assert(lk, KA_XLOCKED | KA_NOTRECURSED,
|
|
|
|
file, line);
|
2013-01-06 21:47:59 +00:00
|
|
|
if (flags & LK_INTERLOCK)
|
|
|
|
class->lc_unlock(ilk);
|
2011-08-01 19:07:03 +00:00
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
}
|
2006-11-11 03:18:07 +00:00
|
|
|
|
If a thread that is swapped out is made runnable, then the setrunnable()
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
2008-08-05 20:02:31 +00:00
|
|
|
wakeup_swapper = 0;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
switch (op) {
|
|
|
|
case LK_SHARED:
|
2018-03-04 19:12:54 +00:00
|
|
|
return (lockmgr_slock_hard(lk, flags, ilk, file, line, &lwa));
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
break;
|
|
|
|
case LK_UPGRADE:
|
2013-09-29 18:02:23 +00:00
|
|
|
case LK_TRYUPGRADE:
|
2018-03-04 19:12:54 +00:00
|
|
|
return (lockmgr_upgrade(lk, flags, ilk, file, line, &lwa));
|
|
|
|
break;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
case LK_EXCLUSIVE:
|
2018-03-04 19:12:54 +00:00
|
|
|
return (lockmgr_xlock_hard(lk, flags, ilk, file, line, &lwa));
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
break;
|
|
|
|
case LK_DOWNGRADE:
|
2012-12-05 15:11:01 +00:00
|
|
|
_lockmgr_assert(lk, KA_XLOCKED, file, line);
|
2008-04-12 19:57:30 +00:00
|
|
|
LOCK_LOG_LOCK("XDOWNGRADE", &lk->lock_object, 0, 0, file, line);
|
|
|
|
WITNESS_DOWNGRADE(&lk->lock_object, 0, file, line);
|
2012-12-05 15:11:01 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Panic if the lock is recursed.
|
|
|
|
*/
|
|
|
|
if (lockmgr_xlocked(lk) && lockmgr_recursed(lk)) {
|
|
|
|
if (flags & LK_INTERLOCK)
|
|
|
|
class->lc_unlock(ilk);
|
|
|
|
panic("%s: downgrade a recursed lockmgr %s @ %s:%d\n",
|
|
|
|
__func__, iwmesg, file, line);
|
|
|
|
}
|
2008-04-12 19:57:30 +00:00
|
|
|
TD_SLOCKS_INC(curthread);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
1997-03-25 16:27:20 +00:00
|
|
|
/*
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
* In order to preserve waiters flags, just spin.
|
1997-03-25 16:27:20 +00:00
|
|
|
*/
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
for (;;) {
|
Introduce support for adaptive spinning in lockmgr.
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
2009-06-17 01:55:42 +00:00
|
|
|
x = lk->lk_lock;
|
|
|
|
MPASS((x & LK_EXCLUSIVE_SPINNERS) == 0);
|
|
|
|
x &= LK_ALL_WAITERS;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (atomic_cmpset_rel_ptr(&lk->lk_lock, tid | x,
|
2008-04-12 19:57:30 +00:00
|
|
|
LK_SHARERS_LOCK(1) | x))
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
break;
|
|
|
|
cpu_spinwait();
|
|
|
|
}
|
1997-03-25 16:27:20 +00:00
|
|
|
break;
|
|
|
|
case LK_RELEASE:
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
_lockmgr_assert(lk, KA_LOCKED, file, line);
|
|
|
|
x = lk->lk_lock;
|
|
|
|
|
2018-03-04 19:12:54 +00:00
|
|
|
if (__predict_true(x & LK_SHARE) != 0) {
|
|
|
|
return (lockmgr_sunlock_hard(lk, x, flags, ilk, file, line));
|
|
|
|
} else {
|
|
|
|
return (lockmgr_xunlock_hard(lk, x, flags, ilk, file, line));
|
|
|
|
}
|
1997-03-25 16:27:20 +00:00
|
|
|
break;
|
|
|
|
case LK_DRAIN:
|
2008-04-12 19:57:30 +00:00
|
|
|
if (LK_CAN_WITNESS(flags))
|
|
|
|
WITNESS_CHECKORDER(&lk->lock_object, LOP_NEWORDER |
|
2013-06-03 17:41:11 +00:00
|
|
|
LOP_EXCLUSIVE, file, line, flags & LK_INTERLOCK ?
|
|
|
|
ilk : NULL);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
1997-03-25 16:27:20 +00:00
|
|
|
/*
|
2008-07-25 11:22:25 +00:00
|
|
|
* Trying to drain a lock we already own will result in a
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
* deadlock.
|
1997-03-25 16:27:20 +00:00
|
|
|
*/
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (lockmgr_xlocked(lk)) {
|
|
|
|
if (flags & LK_INTERLOCK)
|
|
|
|
class->lc_unlock(ilk);
|
|
|
|
panic("%s: draining %s with the lock held @ %s:%d\n",
|
|
|
|
__func__, iwmesg, file, line);
|
|
|
|
}
|
1997-03-25 16:27:20 +00:00
|
|
|
|
2016-06-01 18:32:20 +00:00
|
|
|
for (;;) {
|
|
|
|
if (lk->lk_lock == LK_UNLOCKED &&
|
|
|
|
atomic_cmpset_acq_ptr(&lk->lk_lock, LK_UNLOCKED, tid))
|
|
|
|
break;
|
|
|
|
|
2012-03-28 20:58:30 +00:00
|
|
|
#ifdef HWPMC_HOOKS
|
|
|
|
PMC_SOFT_CALL( , , lock, failed);
|
|
|
|
#endif
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lock_profile_obtain_lock_failed(&lk->lock_object,
|
|
|
|
&contested, &waittime);
|
1997-03-25 16:27:20 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
/*
|
|
|
|
* If the lock is expected to not sleep just give up
|
|
|
|
* and return.
|
|
|
|
*/
|
|
|
|
if (LK_TRYOP(flags)) {
|
|
|
|
LOCK_LOG2(lk, "%s: %p fails the try operation",
|
|
|
|
__func__, lk);
|
|
|
|
error = EBUSY;
|
|
|
|
break;
|
|
|
|
}
|
2008-02-15 21:04:36 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
/*
|
|
|
|
* Acquire the sleepqueue chain lock because we
|
|
|
|
* probabilly will need to manipulate waiters flags.
|
|
|
|
*/
|
|
|
|
sleepq_lock(&lk->lock_object);
|
|
|
|
x = lk->lk_lock;
|
1997-09-21 04:24:27 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
/*
|
|
|
|
* if the lock has been released while we spun on
|
|
|
|
* the sleepqueue chain lock just try again.
|
|
|
|
*/
|
|
|
|
if (x == LK_UNLOCKED) {
|
|
|
|
sleepq_release(&lk->lock_object);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
Introduce support for adaptive spinning in lockmgr.
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
2009-06-17 01:55:42 +00:00
|
|
|
v = x & (LK_ALL_WAITERS | LK_EXCLUSIVE_SPINNERS);
|
|
|
|
if ((x & ~v) == LK_UNLOCKED) {
|
|
|
|
v = (x & ~LK_EXCLUSIVE_SPINNERS);
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If interruptible sleeps left the exclusive
|
|
|
|
* queue empty avoid a starvation for the
|
|
|
|
* threads sleeping on the shared queue by
|
|
|
|
* giving them precedence and cleaning up the
|
|
|
|
* exclusive waiters bit anyway.
|
2010-01-07 01:19:01 +00:00
|
|
|
* Please note that lk_exslpfail count may be
|
|
|
|
* lying about the real number of waiters with
|
|
|
|
* the LK_SLEEPFAIL flag on because they may
|
2016-04-29 22:15:33 +00:00
|
|
|
* be used in conjunction with interruptible
|
2010-01-07 01:24:09 +00:00
|
|
|
* sleeps so lk_exslpfail might be considered
|
|
|
|
* an 'upper limit' bound, including the edge
|
2010-01-07 01:19:01 +00:00
|
|
|
* cases.
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
*/
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (v & LK_EXCLUSIVE_WAITERS) {
|
|
|
|
queue = SQ_EXCLUSIVE_QUEUE;
|
|
|
|
v &= ~LK_EXCLUSIVE_WAITERS;
|
|
|
|
} else {
|
2010-01-07 00:47:50 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Exclusive waiters sleeping with
|
|
|
|
* LK_SLEEPFAIL on and using
|
|
|
|
* interruptible sleeps/timeout may
|
|
|
|
* have left spourious lk_exslpfail
|
|
|
|
* counts on, so clean it up anyway.
|
|
|
|
*/
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
MPASS(v & LK_SHARED_WAITERS);
|
2010-01-07 00:47:50 +00:00
|
|
|
lk->lk_exslpfail = 0;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
queue = SQ_SHARED_QUEUE;
|
|
|
|
v &= ~LK_SHARED_WAITERS;
|
|
|
|
}
|
In current code, threads performing an interruptible sleep (on both
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
2009-12-12 21:31:07 +00:00
|
|
|
if (queue == SQ_EXCLUSIVE_QUEUE) {
|
|
|
|
realexslp =
|
|
|
|
sleepq_sleepcnt(&lk->lock_object,
|
|
|
|
SQ_EXCLUSIVE_QUEUE);
|
|
|
|
if (lk->lk_exslpfail >= realexslp) {
|
|
|
|
lk->lk_exslpfail = 0;
|
|
|
|
queue = SQ_SHARED_QUEUE;
|
|
|
|
v &= ~LK_SHARED_WAITERS;
|
|
|
|
if (realexslp != 0) {
|
|
|
|
LOCK_LOG2(lk,
|
|
|
|
"%s: %p has only LK_SLEEPFAIL sleepers",
|
|
|
|
__func__, lk);
|
|
|
|
LOCK_LOG2(lk,
|
|
|
|
"%s: %p waking up threads on the exclusive queue",
|
|
|
|
__func__, lk);
|
|
|
|
wakeup_swapper =
|
|
|
|
sleepq_broadcast(
|
|
|
|
&lk->lock_object,
|
|
|
|
SLEEPQ_LK, 0,
|
|
|
|
SQ_EXCLUSIVE_QUEUE);
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
lk->lk_exslpfail = 0;
|
|
|
|
}
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (!atomic_cmpset_ptr(&lk->lk_lock, x, v)) {
|
|
|
|
sleepq_release(&lk->lock_object);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
LOCK_LOG3(lk,
|
|
|
|
"%s: %p waking up all threads on the %s queue",
|
|
|
|
__func__, lk, queue == SQ_SHARED_QUEUE ?
|
|
|
|
"shared" : "exclusive");
|
2008-08-22 16:14:23 +00:00
|
|
|
wakeup_swapper |= sleepq_broadcast(
|
If a thread that is swapped out is made runnable, then the setrunnable()
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
2008-08-05 20:02:31 +00:00
|
|
|
&lk->lock_object, SLEEPQ_LK, 0, queue);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If shared waiters have been woken up we need
|
|
|
|
* to wait for one of them to acquire the lock
|
|
|
|
* before to set the exclusive waiters in
|
|
|
|
* order to avoid a deadlock.
|
|
|
|
*/
|
|
|
|
if (queue == SQ_SHARED_QUEUE) {
|
|
|
|
for (v = lk->lk_lock;
|
|
|
|
(v & LK_SHARE) && !LK_SHARERS(v);
|
|
|
|
v = lk->lk_lock)
|
|
|
|
cpu_spinwait();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to set the LK_EXCLUSIVE_WAITERS flag. If we
|
|
|
|
* fail, loop back and retry.
|
|
|
|
*/
|
|
|
|
if ((x & LK_EXCLUSIVE_WAITERS) == 0) {
|
|
|
|
if (!atomic_cmpset_ptr(&lk->lk_lock, x,
|
|
|
|
x | LK_EXCLUSIVE_WAITERS)) {
|
|
|
|
sleepq_release(&lk->lock_object);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
LOCK_LOG2(lk, "%s: %p set drain waiters flag",
|
|
|
|
__func__, lk);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* As far as we have been unable to acquire the
|
|
|
|
* exclusive lock and the exclusive waiters flag
|
|
|
|
* is set, we will sleep.
|
|
|
|
*/
|
|
|
|
if (flags & LK_INTERLOCK) {
|
|
|
|
class->lc_unlock(ilk);
|
|
|
|
flags &= ~LK_INTERLOCK;
|
|
|
|
}
|
2008-04-12 19:57:30 +00:00
|
|
|
GIANT_SAVE();
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
sleepq_add(&lk->lock_object, NULL, iwmesg, SLEEPQ_LK,
|
|
|
|
SQ_EXCLUSIVE_QUEUE);
|
|
|
|
sleepq_wait(&lk->lock_object, ipri & PRIMASK);
|
2008-04-12 19:57:30 +00:00
|
|
|
GIANT_RESTORE();
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
LOCK_LOG2(lk, "%s: %p resuming from the sleep queue",
|
|
|
|
__func__, lk);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (error == 0) {
|
|
|
|
lock_profile_obtain_lock_success(&lk->lock_object,
|
|
|
|
contested, waittime, file, line);
|
|
|
|
LOCK_LOG_LOCK("DRAIN", &lk->lock_object, 0,
|
|
|
|
lk->lk_recurse, file, line);
|
2008-04-12 19:57:30 +00:00
|
|
|
WITNESS_LOCK(&lk->lock_object, LOP_EXCLUSIVE |
|
|
|
|
LK_TRYWIT(flags), file, line);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
TD_LOCKS_INC(curthread);
|
|
|
|
STACK_SAVE(lk);
|
1997-09-21 04:24:27 +00:00
|
|
|
}
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
if (flags & LK_INTERLOCK)
|
|
|
|
class->lc_unlock(ilk);
|
|
|
|
panic("%s: unknown lockmgr request 0x%x\n", __func__, op);
|
1997-09-21 04:24:27 +00:00
|
|
|
}
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (flags & LK_INTERLOCK)
|
|
|
|
class->lc_unlock(ilk);
|
If a thread that is swapped out is made runnable, then the setrunnable()
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
2008-08-05 20:02:31 +00:00
|
|
|
if (wakeup_swapper)
|
|
|
|
kick_proc0();
|
2008-02-06 00:37:14 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
return (error);
|
1997-09-21 04:24:27 +00:00
|
|
|
}
|
|
|
|
|
2000-10-04 01:29:17 +00:00
|
|
|
void
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
_lockmgr_disown(struct lock *lk, const char *file, int line)
|
2000-10-04 01:29:17 +00:00
|
|
|
{
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
uintptr_t tid, x;
|
|
|
|
|
panic: add a switch and infrastructure for stopping other CPUs in SMP case
Historical behavior of letting other CPUs merily go on is a default for
time being. The new behavior can be switched on via
kern.stop_scheduler_on_panic tunable and sysctl.
Stopping of the CPUs has (at least) the following benefits:
- more of the system state at panic time is preserved intact
- threads and interrupts do not interfere with dumping of the system
state
Only one thread runs uninterrupted after panic if stop_scheduler_on_panic
is set. That thread might call code that is also used in normal context
and that code might use locks to prevent concurrent execution of certain
parts. Those locks might be held by the stopped threads and would never
be released. To work around this issue, it was decided that instead of
explicit checks for panic context, we would rather put those checks
inside the locking primitives.
This change has substantial portions written and re-written by attilio
and kib at various times. Other changes are heavily based on the ideas
and patches submitted by jhb and mdf. bde has provided many insights
into the details and history of the current code.
The new behavior may cause problems for systems that use a USB keyboard
for interfacing with system console. This is because of some unusual
locking patterns in the ukbd code which have to be used because on one
hand ukbd is below syscons, but on the other hand it has to interface
with other usb code that uses regular mutexes/Giant for its concurrency
protection. Dumping to USB-connected disks may also be affected.
PR: amd64/139614 (at least)
In cooperation with: attilio, jhb, kib, mdf
Discussed with: arch@, bde
Tested by: Eugene Grosbein <eugen@grosbein.net>,
gnn,
Steven Hartland <killing@multiplay.co.uk>,
glebius,
Andrew Boyer <aboyer@averesystems.com>
(various versions of the patch)
MFC after: 3 months (or never)
2011-12-11 21:02:01 +00:00
|
|
|
if (SCHEDULER_STOPPED())
|
|
|
|
return;
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
tid = (uintptr_t)curthread;
|
2012-12-05 15:11:01 +00:00
|
|
|
_lockmgr_assert(lk, KA_XLOCKED, file, line);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Panic if the lock is recursed.
|
|
|
|
*/
|
|
|
|
if (lockmgr_xlocked(lk) && lockmgr_recursed(lk))
|
|
|
|
panic("%s: disown a recursed lockmgr @ %s:%d\n",
|
|
|
|
__func__, file, line);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
|
|
|
/*
|
2008-07-25 11:22:25 +00:00
|
|
|
* If the owner is already LK_KERNPROC just skip the whole operation.
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
*/
|
|
|
|
if (LK_HOLDER(lk->lk_lock) != tid)
|
|
|
|
return;
|
2009-03-14 11:43:02 +00:00
|
|
|
lock_profile_release_lock(&lk->lock_object);
|
2008-04-12 19:57:30 +00:00
|
|
|
LOCK_LOG_LOCK("XDISOWN", &lk->lock_object, 0, 0, file, line);
|
|
|
|
WITNESS_UNLOCK(&lk->lock_object, LOP_EXCLUSIVE, file, line);
|
|
|
|
TD_LOCKS_DEC(curthread);
|
2009-11-06 22:33:03 +00:00
|
|
|
STACK_SAVE(lk);
|
2007-05-18 15:04:59 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
/*
|
|
|
|
* In order to preserve waiters flags, just spin.
|
|
|
|
*/
|
|
|
|
for (;;) {
|
Introduce support for adaptive spinning in lockmgr.
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
2009-06-17 01:55:42 +00:00
|
|
|
x = lk->lk_lock;
|
|
|
|
MPASS((x & LK_EXCLUSIVE_SPINNERS) == 0);
|
|
|
|
x &= LK_ALL_WAITERS;
|
2008-04-13 01:21:56 +00:00
|
|
|
if (atomic_cmpset_rel_ptr(&lk->lk_lock, tid | x,
|
2008-04-12 19:57:30 +00:00
|
|
|
LK_KERNPROC | x))
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
return;
|
|
|
|
cpu_spinwait();
|
|
|
|
}
|
2000-10-04 01:29:17 +00:00
|
|
|
}
|
|
|
|
|
2008-01-08 23:48:31 +00:00
|
|
|
void
|
2011-11-16 21:51:17 +00:00
|
|
|
lockmgr_printinfo(const struct lock *lk)
|
2008-01-08 23:48:31 +00:00
|
|
|
{
|
|
|
|
struct thread *td;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
uintptr_t x;
|
|
|
|
|
|
|
|
if (lk->lk_lock == LK_UNLOCKED)
|
2009-02-06 20:06:48 +00:00
|
|
|
printf("lock type %s: UNLOCKED\n", lk->lock_object.lo_name);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
else if (lk->lk_lock & LK_SHARE)
|
2009-02-06 20:06:48 +00:00
|
|
|
printf("lock type %s: SHARED (count %ju)\n",
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lock_object.lo_name,
|
|
|
|
(uintmax_t)LK_SHARERS(lk->lk_lock));
|
|
|
|
else {
|
|
|
|
td = lockmgr_xholder(lk);
|
2014-11-13 17:44:35 +00:00
|
|
|
if (td == (struct thread *)LK_KERNPROC)
|
|
|
|
printf("lock type %s: EXCL by KERNPROC\n",
|
|
|
|
lk->lock_object.lo_name);
|
|
|
|
else
|
|
|
|
printf("lock type %s: EXCL by thread %p "
|
|
|
|
"(pid %d, %s, tid %d)\n", lk->lock_object.lo_name,
|
|
|
|
td, td->td_proc->p_pid, td->td_proc->p_comm,
|
|
|
|
td->td_tid);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
}
|
2008-01-08 23:48:31 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
x = lk->lk_lock;
|
|
|
|
if (x & LK_EXCLUSIVE_WAITERS)
|
|
|
|
printf(" with exclusive waiters pending\n");
|
|
|
|
if (x & LK_SHARED_WAITERS)
|
|
|
|
printf(" with shared waiters pending\n");
|
Introduce support for adaptive spinning in lockmgr.
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
2009-06-17 01:55:42 +00:00
|
|
|
if (x & LK_EXCLUSIVE_SPINNERS)
|
|
|
|
printf(" with exclusive spinners pending\n");
|
2008-01-08 23:48:31 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
STACK_PRINT(lk);
|
2008-01-08 23:48:31 +00:00
|
|
|
}
|
|
|
|
|
1997-09-21 04:24:27 +00:00
|
|
|
int
|
2011-11-16 21:51:17 +00:00
|
|
|
lockstatus(const struct lock *lk)
|
1997-09-21 04:24:27 +00:00
|
|
|
{
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
uintptr_t v, x;
|
|
|
|
int ret;
|
1997-09-21 04:24:27 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
ret = LK_SHARED;
|
|
|
|
x = lk->lk_lock;
|
|
|
|
v = LK_HOLDER(x);
|
1997-03-25 16:27:20 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if ((x & LK_SHARE) == 0) {
|
|
|
|
if (v == (uintptr_t)curthread || v == LK_KERNPROC)
|
|
|
|
ret = LK_EXCLUSIVE;
|
|
|
|
else
|
|
|
|
ret = LK_EXCLOTHER;
|
|
|
|
} else if (x == LK_UNLOCKED)
|
|
|
|
ret = 0;
|
|
|
|
|
|
|
|
return (ret);
|
1997-03-25 16:27:20 +00:00
|
|
|
}
|
2006-08-15 16:42:16 +00:00
|
|
|
|
2008-02-13 20:44:19 +00:00
|
|
|
#ifdef INVARIANT_SUPPORT
|
2011-02-25 10:11:01 +00:00
|
|
|
|
|
|
|
FEATURE(invariant_support,
|
|
|
|
"Support for modules compiled with INVARIANTS option");
|
|
|
|
|
2008-02-13 20:44:19 +00:00
|
|
|
#ifndef INVARIANTS
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#undef _lockmgr_assert
|
2008-02-13 20:44:19 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
void
|
2011-11-16 21:51:17 +00:00
|
|
|
_lockmgr_assert(const struct lock *lk, int what, const char *file, int line)
|
2008-02-13 20:44:19 +00:00
|
|
|
{
|
|
|
|
int slocked = 0;
|
|
|
|
|
|
|
|
if (panicstr != NULL)
|
|
|
|
return;
|
|
|
|
switch (what) {
|
|
|
|
case KA_SLOCKED:
|
|
|
|
case KA_SLOCKED | KA_NOTRECURSED:
|
|
|
|
case KA_SLOCKED | KA_RECURSED:
|
|
|
|
slocked = 1;
|
|
|
|
case KA_LOCKED:
|
|
|
|
case KA_LOCKED | KA_NOTRECURSED:
|
|
|
|
case KA_LOCKED | KA_RECURSED:
|
2008-04-12 19:57:30 +00:00
|
|
|
#ifdef WITNESS
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We cannot trust WITNESS if the lock is held in exclusive
|
|
|
|
* mode and a call to lockmgr_disown() happened.
|
|
|
|
* Workaround this skipping the check if the lock is held in
|
|
|
|
* exclusive mode even for the KA_LOCKED case.
|
|
|
|
*/
|
|
|
|
if (slocked || (lk->lk_lock & LK_SHARE)) {
|
|
|
|
witness_assert(&lk->lock_object, what, file, line);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
#endif
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (lk->lk_lock == LK_UNLOCKED ||
|
|
|
|
((lk->lk_lock & LK_SHARE) == 0 && (slocked ||
|
|
|
|
(!lockmgr_xlocked(lk) && !lockmgr_disowned(lk)))))
|
2008-02-13 20:44:19 +00:00
|
|
|
panic("Lock %s not %slocked @ %s:%d\n",
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lock_object.lo_name, slocked ? "share" : "",
|
2008-02-13 20:44:19 +00:00
|
|
|
file, line);
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
|
|
|
|
if ((lk->lk_lock & LK_SHARE) == 0) {
|
|
|
|
if (lockmgr_recursed(lk)) {
|
2008-02-13 20:44:19 +00:00
|
|
|
if (what & KA_NOTRECURSED)
|
|
|
|
panic("Lock %s recursed @ %s:%d\n",
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lock_object.lo_name, file,
|
|
|
|
line);
|
2008-02-13 20:44:19 +00:00
|
|
|
} else if (what & KA_RECURSED)
|
|
|
|
panic("Lock %s not recursed @ %s:%d\n",
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lock_object.lo_name, file, line);
|
2008-02-13 20:44:19 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case KA_XLOCKED:
|
|
|
|
case KA_XLOCKED | KA_NOTRECURSED:
|
|
|
|
case KA_XLOCKED | KA_RECURSED:
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (!lockmgr_xlocked(lk) && !lockmgr_disowned(lk))
|
2008-02-13 20:44:19 +00:00
|
|
|
panic("Lock %s not exclusively locked @ %s:%d\n",
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lock_object.lo_name, file, line);
|
|
|
|
if (lockmgr_recursed(lk)) {
|
2008-02-13 20:44:19 +00:00
|
|
|
if (what & KA_NOTRECURSED)
|
|
|
|
panic("Lock %s recursed @ %s:%d\n",
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lock_object.lo_name, file, line);
|
2008-02-13 20:44:19 +00:00
|
|
|
} else if (what & KA_RECURSED)
|
|
|
|
panic("Lock %s not recursed @ %s:%d\n",
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lock_object.lo_name, file, line);
|
2008-02-13 20:44:19 +00:00
|
|
|
break;
|
|
|
|
case KA_UNLOCKED:
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (lockmgr_xlocked(lk) || lockmgr_disowned(lk))
|
2008-02-13 20:44:19 +00:00
|
|
|
panic("Lock %s exclusively locked @ %s:%d\n",
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk->lock_object.lo_name, file, line);
|
2008-02-13 20:44:19 +00:00
|
|
|
break;
|
|
|
|
default:
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
panic("Unknown lockmgr assertion: %d @ %s:%d\n", what, file,
|
|
|
|
line);
|
2008-02-13 20:44:19 +00:00
|
|
|
}
|
|
|
|
}
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
#endif
|
2008-02-13 20:44:19 +00:00
|
|
|
|
2006-08-15 16:42:16 +00:00
|
|
|
#ifdef DDB
|
2006-08-15 18:29:01 +00:00
|
|
|
int
|
|
|
|
lockmgr_chain(struct thread *td, struct thread **ownerp)
|
|
|
|
{
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
struct lock *lk;
|
2006-08-15 18:29:01 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
lk = td->td_wchan;
|
2006-08-15 18:29:01 +00:00
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (LOCK_CLASS(&lk->lock_object) != &lock_class_lockmgr)
|
|
|
|
return (0);
|
|
|
|
db_printf("blocked on lockmgr %s", lk->lock_object.lo_name);
|
|
|
|
if (lk->lk_lock & LK_SHARE)
|
|
|
|
db_printf("SHARED (count %ju)\n",
|
|
|
|
(uintmax_t)LK_SHARERS(lk->lk_lock));
|
|
|
|
else
|
|
|
|
db_printf("EXCL\n");
|
|
|
|
*ownerp = lockmgr_xholder(lk);
|
2007-03-21 19:28:20 +00:00
|
|
|
|
2006-08-15 18:29:01 +00:00
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
static void
|
2011-11-16 21:51:17 +00:00
|
|
|
db_show_lockmgr(const struct lock_object *lock)
|
2006-08-15 16:42:16 +00:00
|
|
|
{
|
|
|
|
struct thread *td;
|
2011-11-16 21:51:17 +00:00
|
|
|
const struct lock *lk;
|
2006-08-15 16:42:16 +00:00
|
|
|
|
2011-11-16 21:51:17 +00:00
|
|
|
lk = (const struct lock *)lock;
|
2006-08-15 16:42:16 +00:00
|
|
|
|
2007-03-30 18:07:24 +00:00
|
|
|
db_printf(" state: ");
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
if (lk->lk_lock == LK_UNLOCKED)
|
2006-08-15 16:42:16 +00:00
|
|
|
db_printf("UNLOCKED\n");
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
else if (lk->lk_lock & LK_SHARE)
|
|
|
|
db_printf("SLOCK: %ju\n", (uintmax_t)LK_SHARERS(lk->lk_lock));
|
|
|
|
else {
|
|
|
|
td = lockmgr_xholder(lk);
|
|
|
|
if (td == (struct thread *)LK_KERNPROC)
|
|
|
|
db_printf("XLOCK: LK_KERNPROC\n");
|
|
|
|
else
|
|
|
|
db_printf("XLOCK: %p (tid %d, pid %d, \"%s\")\n", td,
|
|
|
|
td->td_tid, td->td_proc->p_pid,
|
|
|
|
td->td_proc->p_comm);
|
|
|
|
if (lockmgr_recursed(lk))
|
|
|
|
db_printf(" recursed: %d\n", lk->lk_recurse);
|
|
|
|
}
|
|
|
|
db_printf(" waiters: ");
|
|
|
|
switch (lk->lk_lock & LK_ALL_WAITERS) {
|
|
|
|
case LK_SHARED_WAITERS:
|
|
|
|
db_printf("shared\n");
|
2009-05-12 17:05:40 +00:00
|
|
|
break;
|
Optimize lockmgr in order to get rid of the pool mutex interlock, of the
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
|
|
|
case LK_EXCLUSIVE_WAITERS:
|
|
|
|
db_printf("exclusive\n");
|
|
|
|
break;
|
|
|
|
case LK_ALL_WAITERS:
|
|
|
|
db_printf("shared and exclusive\n");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
db_printf("none\n");
|
|
|
|
}
|
Introduce support for adaptive spinning in lockmgr.
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
2009-06-17 01:55:42 +00:00
|
|
|
db_printf(" spinners: ");
|
|
|
|
if (lk->lk_lock & LK_EXCLUSIVE_SPINNERS)
|
|
|
|
db_printf("exclusive\n");
|
|
|
|
else
|
|
|
|
db_printf("none\n");
|
2006-08-15 16:42:16 +00:00
|
|
|
}
|
|
|
|
#endif
|