freebsd-nq/sys/dev/acpica/acpi_resource.c

747 lines
22 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/malloc.h>
2004-05-30 20:08:47 +00:00
#include <sys/module.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include "acpi.h"
#include <dev/acpica/acpivar.h>
/* Hooks for the ACPI CA debugging infrastructure */
#define _COMPONENT ACPI_BUS
ACPI_MODULE_NAME("RESOURCE")
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
struct lookup_irq_request {
ACPI_RESOURCE *acpi_res;
struct resource *res;
int counter;
int rid;
int found;
};
static ACPI_STATUS
acpi_lookup_irq_handler(ACPI_RESOURCE *res, void *context)
{
struct lookup_irq_request *req;
u_int irqnum, irq;
switch (res->Id) {
case ACPI_RSTYPE_IRQ:
case ACPI_RSTYPE_EXT_IRQ:
if (res->Id == ACPI_RSTYPE_IRQ) {
irqnum = res->Data.Irq.NumberOfInterrupts;
irq = res->Data.Irq.Interrupts[0];
} else {
irqnum = res->Data.ExtendedIrq.NumberOfInterrupts;
irq = res->Data.ExtendedIrq.Interrupts[0];
}
if (irqnum != 1)
break;
req = (struct lookup_irq_request *)context;
if (req->counter != req->rid) {
req->counter++;
break;
}
req->found = 1;
KASSERT(irq == rman_get_start(req->res),
("IRQ resources do not match"));
bcopy(res, req->acpi_res, sizeof(ACPI_RESOURCE));
return (AE_CTRL_TERMINATE);
}
return (AE_OK);
}
ACPI_STATUS
acpi_lookup_irq_resource(device_t dev, int rid, struct resource *res,
ACPI_RESOURCE *acpi_res)
{
struct lookup_irq_request req;
ACPI_STATUS status;
req.acpi_res = acpi_res;
req.res = res;
req.counter = 0;
req.rid = rid;
req.found = 0;
status = AcpiWalkResources(acpi_get_handle(dev), "_CRS",
acpi_lookup_irq_handler, &req);
if (ACPI_SUCCESS(status) && req.found == 0)
status = AE_NOT_FOUND;
return (status);
}
void
acpi_config_intr(device_t dev, ACPI_RESOURCE *res)
{
u_int irq;
int pol, trig;
switch (res->Id) {
case ACPI_RSTYPE_IRQ:
KASSERT(res->Data.Irq.NumberOfInterrupts == 1,
("%s: multiple interrupts", __func__));
irq = res->Data.Irq.Interrupts[0];
trig = res->Data.Irq.EdgeLevel;
pol = res->Data.Irq.ActiveHighLow;
break;
case ACPI_RSTYPE_EXT_IRQ:
KASSERT(res->Data.ExtendedIrq.NumberOfInterrupts == 1,
("%s: multiple interrupts", __func__));
irq = res->Data.ExtendedIrq.Interrupts[0];
trig = res->Data.ExtendedIrq.EdgeLevel;
pol = res->Data.ExtendedIrq.ActiveHighLow;
break;
default:
panic("%s: bad resource type %u", __func__, res->Id);
}
BUS_CONFIG_INTR(dev, irq, (trig == ACPI_EDGE_SENSITIVE) ?
INTR_TRIGGER_EDGE : INTR_TRIGGER_LEVEL, (pol == ACPI_ACTIVE_HIGH) ?
INTR_POLARITY_HIGH : INTR_POLARITY_LOW);
}
/*
* Fetch a device's resources and associate them with the device.
*
* Note that it might be nice to also locate ACPI-specific resource items, such
* as GPE bits.
*
* We really need to split the resource-fetching code out from the
* resource-parsing code, since we may want to use the parsing
* code for _PRS someday.
*/
ACPI_STATUS
acpi_parse_resources(device_t dev, ACPI_HANDLE handle,
struct acpi_parse_resource_set *set, void *arg)
{
ACPI_BUFFER buf;
ACPI_RESOURCE *res;
char *curr, *last;
ACPI_STATUS status;
void *context;
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
/*
* Special-case some devices that abuse _PRS/_CRS to mean
* something other than "I consume this resource".
*
* XXX do we really need this? It's only relevant once
* we start always-allocating these resources, and even
* then, the only special-cased device is likely to be
* the PCI interrupt link.
*/
/* Fetch the device's current resources. */
buf.Length = ACPI_ALLOCATE_BUFFER;
if (ACPI_FAILURE((status = AcpiGetCurrentResources(handle, &buf)))) {
if (status != AE_NOT_FOUND)
printf("can't fetch resources for %s - %s\n",
acpi_name(handle), AcpiFormatException(status));
return_ACPI_STATUS (status);
}
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "%s - got %ld bytes of resources\n",
acpi_name(handle), (long)buf.Length));
set->set_init(dev, arg, &context);
/* Iterate through the resources */
curr = buf.Pointer;
last = (char *)buf.Pointer + buf.Length;
while (curr < last) {
res = (ACPI_RESOURCE *)curr;
curr += res->Length;
/* Handle the individual resource types */
switch(res->Id) {
case ACPI_RSTYPE_END_TAG:
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "EndTag\n"));
curr = last;
break;
case ACPI_RSTYPE_FIXED_IO:
if (res->Data.FixedIo.RangeLength <= 0)
break;
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "FixedIo 0x%x/%d\n",
res->Data.FixedIo.BaseAddress,
res->Data.FixedIo.RangeLength));
set->set_ioport(dev, context,
res->Data.FixedIo.BaseAddress,
res->Data.FixedIo.RangeLength);
break;
case ACPI_RSTYPE_IO:
if (res->Data.Io.RangeLength <= 0)
break;
if (res->Data.Io.MinBaseAddress == res->Data.Io.MaxBaseAddress) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Io 0x%x/%d\n",
res->Data.Io.MinBaseAddress,
res->Data.Io.RangeLength));
set->set_ioport(dev, context,
res->Data.Io.MinBaseAddress,
res->Data.Io.RangeLength);
} else {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Io 0x%x-0x%x/%d\n",
res->Data.Io.MinBaseAddress,
res->Data.Io.MaxBaseAddress,
res->Data.Io.RangeLength));
set->set_iorange(dev, context,
res->Data.Io.MinBaseAddress,
res->Data.Io.MaxBaseAddress,
res->Data.Io.RangeLength,
res->Data.Io.Alignment);
}
break;
case ACPI_RSTYPE_FIXED_MEM32:
if (res->Data.FixedMemory32.RangeLength <= 0)
break;
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "FixedMemory32 0x%x/%d\n",
res->Data.FixedMemory32.RangeBaseAddress,
res->Data.FixedMemory32.RangeLength));
set->set_memory(dev, context,
res->Data.FixedMemory32.RangeBaseAddress,
res->Data.FixedMemory32.RangeLength);
break;
case ACPI_RSTYPE_MEM32:
if (res->Data.Memory32.RangeLength <= 0)
break;
if (res->Data.Memory32.MinBaseAddress ==
res->Data.Memory32.MaxBaseAddress) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Memory32 0x%x/%d\n",
res->Data.Memory32.MinBaseAddress,
res->Data.Memory32.RangeLength));
set->set_memory(dev, context,
res->Data.Memory32.MinBaseAddress,
res->Data.Memory32.RangeLength);
} else {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Memory32 0x%x-0x%x/%d\n",
res->Data.Memory32.MinBaseAddress,
res->Data.Memory32.MaxBaseAddress,
res->Data.Memory32.RangeLength));
set->set_memoryrange(dev, context,
res->Data.Memory32.MinBaseAddress,
res->Data.Memory32.MaxBaseAddress,
res->Data.Memory32.RangeLength,
res->Data.Memory32.Alignment);
}
break;
case ACPI_RSTYPE_MEM24:
if (res->Data.Memory24.RangeLength <= 0)
break;
if (res->Data.Memory24.MinBaseAddress ==
res->Data.Memory24.MaxBaseAddress) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Memory24 0x%x/%d\n",
res->Data.Memory24.MinBaseAddress,
res->Data.Memory24.RangeLength));
set->set_memory(dev, context, res->Data.Memory24.MinBaseAddress,
res->Data.Memory24.RangeLength);
} else {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Memory24 0x%x-0x%x/%d\n",
res->Data.Memory24.MinBaseAddress,
res->Data.Memory24.MaxBaseAddress,
res->Data.Memory24.RangeLength));
set->set_memoryrange(dev, context,
res->Data.Memory24.MinBaseAddress,
res->Data.Memory24.MaxBaseAddress,
res->Data.Memory24.RangeLength,
res->Data.Memory24.Alignment);
}
break;
case ACPI_RSTYPE_IRQ:
/*
* from 1.0b 6.4.2
* "This structure is repeated for each separate interrupt
* required"
*/
set->set_irq(dev, context, res->Data.Irq.Interrupts,
res->Data.Irq.NumberOfInterrupts, res->Data.Irq.EdgeLevel,
res->Data.Irq.ActiveHighLow);
break;
case ACPI_RSTYPE_DMA:
/*
* from 1.0b 6.4.3
* "This structure is repeated for each separate dma channel
* required"
*/
set->set_drq(dev, context, res->Data.Dma.Channels,
res->Data.Dma.NumberOfChannels);
break;
case ACPI_RSTYPE_START_DPF:
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "start dependant functions\n"));
set->set_start_dependant(dev, context,
res->Data.StartDpf.CompatibilityPriority);
break;
case ACPI_RSTYPE_END_DPF:
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "end dependant functions\n"));
set->set_end_dependant(dev, context);
break;
case ACPI_RSTYPE_ADDRESS32:
if (res->Data.Address32.AddressLength <= 0)
break;
if (res->Data.Address32.ProducerConsumer != ACPI_CONSUMER) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"ignored Address32 %s producer\n",
res->Data.Address32.ResourceType == ACPI_IO_RANGE ?
"IO" : "Memory"));
break;
}
if (res->Data.Address32.ResourceType != ACPI_MEMORY_RANGE &&
res->Data.Address32.ResourceType != ACPI_IO_RANGE) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"ignored Address32 for non-memory, non-I/O\n"));
break;
}
if (res->Data.Address32.MinAddressFixed == ACPI_ADDRESS_FIXED &&
res->Data.Address32.MaxAddressFixed == ACPI_ADDRESS_FIXED) {
if (res->Data.Address32.ResourceType == ACPI_MEMORY_RANGE) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"Address32/Memory 0x%x/%d\n",
res->Data.Address32.MinAddressRange,
res->Data.Address32.AddressLength));
set->set_memory(dev, context,
res->Data.Address32.MinAddressRange,
res->Data.Address32.AddressLength);
} else {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"Address32/IO 0x%x/%d\n",
res->Data.Address32.MinAddressRange,
res->Data.Address32.AddressLength));
set->set_ioport(dev, context,
res->Data.Address32.MinAddressRange,
res->Data.Address32.AddressLength);
}
} else {
if (res->Data.Address32.ResourceType == ACPI_MEMORY_RANGE) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"Address32/Memory 0x%x-0x%x/%d\n",
res->Data.Address32.MinAddressRange,
res->Data.Address32.MaxAddressRange,
res->Data.Address32.AddressLength));
set->set_memoryrange(dev, context,
res->Data.Address32.MinAddressRange,
res->Data.Address32.MaxAddressRange,
res->Data.Address32.AddressLength,
res->Data.Address32.Granularity);
} else {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"Address32/IO 0x%x-0x%x/%d\n",
res->Data.Address32.MinAddressRange,
res->Data.Address32.MaxAddressRange,
res->Data.Address32.AddressLength));
set->set_iorange(dev, context,
res->Data.Address32.MinAddressRange,
res->Data.Address32.MaxAddressRange,
res->Data.Address32.AddressLength,
res->Data.Address32.Granularity);
}
}
break;
case ACPI_RSTYPE_ADDRESS16:
if (res->Data.Address16.AddressLength <= 0)
break;
if (res->Data.Address16.ProducerConsumer != ACPI_CONSUMER) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"ignored Address16 %s producer\n",
res->Data.Address16.ResourceType == ACPI_IO_RANGE ?
"IO" : "Memory"));
break;
}
if (res->Data.Address16.ResourceType != ACPI_MEMORY_RANGE &&
res->Data.Address16.ResourceType != ACPI_IO_RANGE) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"ignored Address16 for non-memory, non-I/O\n"));
break;
}
if (res->Data.Address16.MinAddressFixed == ACPI_ADDRESS_FIXED &&
res->Data.Address16.MaxAddressFixed == ACPI_ADDRESS_FIXED) {
if (res->Data.Address16.ResourceType == ACPI_MEMORY_RANGE) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"Address16/Memory 0x%x/%d\n",
res->Data.Address16.MinAddressRange,
res->Data.Address16.AddressLength));
set->set_memory(dev, context,
res->Data.Address16.MinAddressRange,
res->Data.Address16.AddressLength);
} else {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"Address16/IO 0x%x/%d\n",
res->Data.Address16.MinAddressRange,
res->Data.Address16.AddressLength));
set->set_ioport(dev, context,
res->Data.Address16.MinAddressRange,
res->Data.Address16.AddressLength);
}
} else {
if (res->Data.Address16.ResourceType == ACPI_MEMORY_RANGE) {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"Address16/Memory 0x%x-0x%x/%d\n",
res->Data.Address16.MinAddressRange,
res->Data.Address16.MaxAddressRange,
res->Data.Address16.AddressLength));
set->set_memoryrange(dev, context,
res->Data.Address16.MinAddressRange,
res->Data.Address16.MaxAddressRange,
res->Data.Address16.AddressLength,
res->Data.Address16.Granularity);
} else {
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"Address16/IO 0x%x-0x%x/%d\n",
res->Data.Address16.MinAddressRange,
res->Data.Address16.MaxAddressRange,
res->Data.Address16.AddressLength));
set->set_iorange(dev, context,
res->Data.Address16.MinAddressRange,
res->Data.Address16.MaxAddressRange,
res->Data.Address16.AddressLength,
res->Data.Address16.Granularity);
}
}
break;
case ACPI_RSTYPE_ADDRESS64:
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"unimplemented Address64 resource\n"));
break;
case ACPI_RSTYPE_EXT_IRQ:
/* XXX special handling? */
set->set_irq(dev, context,res->Data.ExtendedIrq.Interrupts,
res->Data.ExtendedIrq.NumberOfInterrupts,
res->Data.ExtendedIrq.EdgeLevel,
res->Data.ExtendedIrq.ActiveHighLow);
break;
case ACPI_RSTYPE_VENDOR:
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"unimplemented VendorSpecific resource\n"));
break;
default:
break;
}
}
AcpiOsFree(buf.Pointer);
set->set_done(dev, context);
return_ACPI_STATUS (AE_OK);
}
/*
* Resource-set vectors used to attach _CRS-derived resources
* to an ACPI device.
*/
static void acpi_res_set_init(device_t dev, void *arg, void **context);
static void acpi_res_set_done(device_t dev, void *context);
static void acpi_res_set_ioport(device_t dev, void *context,
u_int32_t base, u_int32_t length);
static void acpi_res_set_iorange(device_t dev, void *context,
u_int32_t low, u_int32_t high,
u_int32_t length, u_int32_t align);
static void acpi_res_set_memory(device_t dev, void *context,
u_int32_t base, u_int32_t length);
static void acpi_res_set_memoryrange(device_t dev, void *context,
u_int32_t low, u_int32_t high,
u_int32_t length, u_int32_t align);
static void acpi_res_set_irq(device_t dev, void *context, u_int32_t *irq,
int count, int trig, int pol);
static void acpi_res_set_drq(device_t dev, void *context, u_int32_t *drq,
int count);
static void acpi_res_set_start_dependant(device_t dev, void *context,
int preference);
static void acpi_res_set_end_dependant(device_t dev, void *context);
struct acpi_parse_resource_set acpi_res_parse_set = {
acpi_res_set_init,
acpi_res_set_done,
acpi_res_set_ioport,
acpi_res_set_iorange,
acpi_res_set_memory,
acpi_res_set_memoryrange,
acpi_res_set_irq,
acpi_res_set_drq,
acpi_res_set_start_dependant,
acpi_res_set_end_dependant
};
struct acpi_res_context {
int ar_nio;
int ar_nmem;
int ar_nirq;
int ar_ndrq;
void *ar_parent;
};
static void
acpi_res_set_init(device_t dev, void *arg, void **context)
{
struct acpi_res_context *cp;
if ((cp = AcpiOsAllocate(sizeof(*cp))) != NULL) {
bzero(cp, sizeof(*cp));
cp->ar_parent = arg;
*context = cp;
}
}
static void
acpi_res_set_done(device_t dev, void *context)
{
struct acpi_res_context *cp = (struct acpi_res_context *)context;
if (cp == NULL)
return;
AcpiOsFree(cp);
}
static void
acpi_res_set_ioport(device_t dev, void *context, u_int32_t base,
u_int32_t length)
{
struct acpi_res_context *cp = (struct acpi_res_context *)context;
if (cp == NULL)
return;
bus_set_resource(dev, SYS_RES_IOPORT, cp->ar_nio++, base, length);
}
static void
acpi_res_set_iorange(device_t dev, void *context, u_int32_t low,
u_int32_t high, u_int32_t length, u_int32_t align)
{
struct acpi_res_context *cp = (struct acpi_res_context *)context;
if (cp == NULL)
return;
device_printf(dev, "I/O range not supported\n");
}
static void
acpi_res_set_memory(device_t dev, void *context, u_int32_t base,
u_int32_t length)
{
struct acpi_res_context *cp = (struct acpi_res_context *)context;
if (cp == NULL)
return;
bus_set_resource(dev, SYS_RES_MEMORY, cp->ar_nmem++, base, length);
}
static void
acpi_res_set_memoryrange(device_t dev, void *context, u_int32_t low,
u_int32_t high, u_int32_t length, u_int32_t align)
{
struct acpi_res_context *cp = (struct acpi_res_context *)context;
if (cp == NULL)
return;
device_printf(dev, "memory range not supported\n");
}
static void
acpi_res_set_irq(device_t dev, void *context, u_int32_t *irq, int count,
int trig, int pol)
{
struct acpi_res_context *cp = (struct acpi_res_context *)context;
if (cp == NULL || irq == NULL)
return;
/* This implements no resource relocation. */
if (count != 1)
return;
bus_set_resource(dev, SYS_RES_IRQ, cp->ar_nirq++, *irq, 1);
}
static void
acpi_res_set_drq(device_t dev, void *context, u_int32_t *drq, int count)
{
struct acpi_res_context *cp = (struct acpi_res_context *)context;
if (cp == NULL || drq == NULL)
return;
/* This implements no resource relocation. */
if (count != 1)
return;
bus_set_resource(dev, SYS_RES_DRQ, cp->ar_ndrq++, *drq, 1);
}
static void
acpi_res_set_start_dependant(device_t dev, void *context, int preference)
{
struct acpi_res_context *cp = (struct acpi_res_context *)context;
if (cp == NULL)
return;
device_printf(dev, "dependant functions not supported\n");
}
static void
acpi_res_set_end_dependant(device_t dev, void *context)
{
struct acpi_res_context *cp = (struct acpi_res_context *)context;
if (cp == NULL)
return;
device_printf(dev, "dependant functions not supported\n");
}
/*
* Resource-owning placeholders for IO and memory pseudo-devices.
*
* This code allocates system resource objects that will be owned by ACPI
* child devices. Really, the acpi parent device should have the resources
* but this would significantly affect the device probe code.
*/
static int acpi_sysres_probe(device_t dev);
static int acpi_sysres_attach(device_t dev);
static device_method_t acpi_sysres_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, acpi_sysres_probe),
DEVMETHOD(device_attach, acpi_sysres_attach),
{0, 0}
};
static driver_t acpi_sysres_driver = {
"acpi_sysresource",
acpi_sysres_methods,
0,
};
static devclass_t acpi_sysres_devclass;
DRIVER_MODULE(acpi_sysresource, acpi, acpi_sysres_driver, acpi_sysres_devclass,
0, 0);
MODULE_DEPEND(acpi_sysresource, acpi, 1, 1, 1);
static int
acpi_sysres_probe(device_t dev)
{
static char *sysres_ids[] = { "PNP0C01", "PNP0C02", NULL };
if (acpi_disabled("sysresource") ||
ACPI_ID_PROBE(device_get_parent(dev), dev, sysres_ids) == NULL)
return (ENXIO);
device_set_desc(dev, "System Resource");
device_quiet(dev);
return (-100);
}
static int
acpi_sysres_attach(device_t dev)
{
device_t gparent;
struct resource *res;
struct rman *rm;
struct resource_list_entry *rle;
struct resource_list *rl;
/*
* Pre-allocate/manage all memory and IO resources. We detect duplicates
* by setting rle->res to the resource we got from the parent. We can't
* ignore them since rman can't handle duplicates.
*/
rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev);
SLIST_FOREACH(rle, rl, link) {
if (rle->res != NULL) {
device_printf(dev, "duplicate resource for %lx\n", rle->start);
continue;
}
/* Only memory and IO resources are valid here. */
switch (rle->type) {
case SYS_RES_IOPORT:
rm = &acpi_rman_io;
break;
case SYS_RES_MEMORY:
rm = &acpi_rman_mem;
break;
default:
continue;
}
/* Pre-allocate resource and add to our rman pool. */
gparent = device_get_parent(device_get_parent(dev));
res = BUS_ALLOC_RESOURCE(gparent, dev, rle->type, &rle->rid,
rle->start, rle->start + rle->count - 1, rle->count, 0);
if (res != NULL) {
rman_manage_region(rm, rman_get_start(res), rman_get_end(res));
rle->res = res;
}
}
return (0);
}
struct resource_list_entry *
acpi_sysres_find(int type, u_long addr)
{
device_t *devs;
int i, numdevs;
struct resource_list *rl;
struct resource_list_entry *rle;
/* We only consider IO and memory resources for our pool. */
rle = NULL;
if (type != SYS_RES_IOPORT && type != SYS_RES_MEMORY)
return (rle);
/* Find all the sysresource devices. */
if (devclass_get_devices(acpi_sysres_devclass, &devs, &numdevs) != 0)
return (rle);
/* Check each device for a resource that contains "addr". */
for (i = 0; i < numdevs && rle == NULL; i++) {
rl = BUS_GET_RESOURCE_LIST(device_get_parent(devs[i]), devs[i]);
if (rl == NULL)
continue;
SLIST_FOREACH(rle, rl, link) {
if (type == rle->type && addr >= rle->start &&
addr < rle->start + rle->count)
break;
}
}
free(devs, M_TEMP);
return (rle);
}