freebsd-nq/sys/dev/pci/pci_subr.c

385 lines
10 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2011 Hudson River Trading LLC
* Written by: John H. Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Support APIs for Host to PCI bridge drivers and drivers that
* provide PCI domains.
*/
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <sys/rman.h>
#include <sys/systm.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcib_private.h>
/*
* Try to read the bus number of a host-PCI bridge using appropriate config
* registers.
*/
int
host_pcib_get_busno(pci_read_config_fn read_config, int bus, int slot, int func,
uint8_t *busnum)
{
uint32_t id;
id = read_config(bus, slot, func, PCIR_DEVVENDOR, 4);
if (id == 0xffffffff)
return (0);
switch (id) {
case 0x12258086:
/* Intel 824?? */
/* XXX This is a guess */
/* *busnum = read_config(bus, slot, func, 0x41, 1); */
*busnum = bus;
break;
case 0x84c48086:
/* Intel 82454KX/GX (Orion) */
*busnum = read_config(bus, slot, func, 0x4a, 1);
break;
case 0x84ca8086:
/*
* For the 450nx chipset, there is a whole bundle of
* things pretending to be host bridges. The MIOC will
* be seen first and isn't really a pci bridge (the
* actual busses are attached to the PXB's). We need to
* read the registers of the MIOC to figure out the
* bus numbers for the PXB channels.
*
* Since the MIOC doesn't have a pci bus attached, we
* pretend it wasn't there.
*/
return (0);
case 0x84cb8086:
switch (slot) {
case 0x12:
/* Intel 82454NX PXB#0, Bus#A */
*busnum = read_config(bus, 0x10, func, 0xd0, 1);
break;
case 0x13:
/* Intel 82454NX PXB#0, Bus#B */
*busnum = read_config(bus, 0x10, func, 0xd1, 1) + 1;
break;
case 0x14:
/* Intel 82454NX PXB#1, Bus#A */
*busnum = read_config(bus, 0x10, func, 0xd3, 1);
break;
case 0x15:
/* Intel 82454NX PXB#1, Bus#B */
*busnum = read_config(bus, 0x10, func, 0xd4, 1) + 1;
break;
}
break;
/* ServerWorks -- vendor 0x1166 */
case 0x00051166:
case 0x00061166:
case 0x00081166:
case 0x00091166:
case 0x00101166:
case 0x00111166:
case 0x00171166:
case 0x01011166:
case 0x010f1014:
case 0x01101166:
case 0x02011166:
case 0x02251166:
case 0x03021014:
*busnum = read_config(bus, slot, func, 0x44, 1);
break;
/* Compaq/HP -- vendor 0x0e11 */
case 0x60100e11:
*busnum = read_config(bus, slot, func, 0xc8, 1);
break;
default:
/* Don't know how to read bus number. */
return 0;
}
return 1;
}
#ifdef NEW_PCIB
/*
* Return a pointer to a pretty name for a PCI device. If the device
* has a driver attached, the device's name is used, otherwise a name
* is generated from the device's PCI address.
*/
const char *
pcib_child_name(device_t child)
{
static char buf[64];
if (device_get_nameunit(child) != NULL)
return (device_get_nameunit(child));
snprintf(buf, sizeof(buf), "pci%d:%d:%d:%d", pci_get_domain(child),
pci_get_bus(child), pci_get_slot(child), pci_get_function(child));
return (buf);
}
/*
* Some Host-PCI bridge drivers know which resource ranges they can
* decode and should only allocate subranges to child PCI devices.
2014-02-05 19:23:05 +00:00
* This API provides a way to manage this. The bridge driver should
* initialize this structure during attach and call
* pcib_host_res_decodes() on each resource range it decodes. It can
* then use pcib_host_res_alloc() and pcib_host_res_adjust() as helper
* routines for BUS_ALLOC_RESOURCE() and BUS_ADJUST_RESOURCE(). This
* API assumes that resources for any decoded ranges can be safely
* allocated from the parent via bus_generic_alloc_resource().
*/
int
pcib_host_res_init(device_t pcib, struct pcib_host_resources *hr)
{
hr->hr_pcib = pcib;
resource_list_init(&hr->hr_rl);
return (0);
}
int
pcib_host_res_free(device_t pcib, struct pcib_host_resources *hr)
{
resource_list_free(&hr->hr_rl);
return (0);
}
int
pcib_host_res_decodes(struct pcib_host_resources *hr, int type, rman_res_t start,
rman_res_t end, u_int flags)
{
struct resource_list_entry *rle;
int rid;
if (bootverbose)
Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. On some architectures, u_long isn't large enough for resource definitions. Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but type `long' is only 32-bit. This extends rman's resources to uintmax_t. With this change, any resource can feasibly be placed anywhere in physical memory (within the constraints of the driver). Why uintmax_t and not something machine dependent, or uint64_t? Though it's possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on 32-bit architectures. 64-bit architectures should have plenty of RAM to absorb the increase on resource sizes if and when this occurs, and the number of resources on memory-constrained systems should be sufficiently small as to not pose a drastic overhead. That being said, uintmax_t was chosen for source clarity. If it's specified as uint64_t, all printf()-like calls would either need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t aren't horrible, but it would also bake into the API for resource_list_print_type() either a hidden assumption that entries get cast to uintmax_t for printing, or these calls would need the PRI*64 macros. Since source code is meant to be read more often than written, I chose the clearest path of simply using uintmax_t. Tested on a PowerPC p5020-based board, which places all device resources in 0xfxxxxxxxx, and has 8GB RAM. Regression tested on qemu-system-i386 Regression tested on qemu-system-mips (malta profile) Tested PAE and devinfo on virtualbox (live CD) Special thanks to bz for his testing on ARM. Reviewed By: bz, jhb (previous) Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
device_printf(hr->hr_pcib, "decoding %d %srange %#jx-%#jx\n",
type, flags & RF_PREFETCHABLE ? "prefetchable ": "", start,
end);
rid = resource_list_add_next(&hr->hr_rl, type, start, end,
end - start + 1);
if (flags & RF_PREFETCHABLE) {
KASSERT(type == SYS_RES_MEMORY,
("only memory is prefetchable"));
rle = resource_list_find(&hr->hr_rl, type, rid);
rle->flags = RLE_PREFETCH;
}
return (0);
}
struct resource *
pcib_host_res_alloc(struct pcib_host_resources *hr, device_t dev, int type,
int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
{
struct resource_list_entry *rle;
struct resource *r;
rman_res_t new_start, new_end;
if (flags & RF_PREFETCHABLE)
KASSERT(type == SYS_RES_MEMORY,
("only memory is prefetchable"));
rle = resource_list_find(&hr->hr_rl, type, 0);
if (rle == NULL) {
/*
* No decoding ranges for this resource type, just pass
* the request up to the parent.
*/
return (bus_generic_alloc_resource(hr->hr_pcib, dev, type, rid,
start, end, count, flags));
}
restart:
/* Try to allocate from each decoded range. */
for (; rle != NULL; rle = STAILQ_NEXT(rle, link)) {
if (rle->type != type)
continue;
if (((flags & RF_PREFETCHABLE) != 0) !=
((rle->flags & RLE_PREFETCH) != 0))
continue;
Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. On some architectures, u_long isn't large enough for resource definitions. Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but type `long' is only 32-bit. This extends rman's resources to uintmax_t. With this change, any resource can feasibly be placed anywhere in physical memory (within the constraints of the driver). Why uintmax_t and not something machine dependent, or uint64_t? Though it's possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on 32-bit architectures. 64-bit architectures should have plenty of RAM to absorb the increase on resource sizes if and when this occurs, and the number of resources on memory-constrained systems should be sufficiently small as to not pose a drastic overhead. That being said, uintmax_t was chosen for source clarity. If it's specified as uint64_t, all printf()-like calls would either need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t aren't horrible, but it would also bake into the API for resource_list_print_type() either a hidden assumption that entries get cast to uintmax_t for printing, or these calls would need the PRI*64 macros. Since source code is meant to be read more often than written, I chose the clearest path of simply using uintmax_t. Tested on a PowerPC p5020-based board, which places all device resources in 0xfxxxxxxxx, and has 8GB RAM. Regression tested on qemu-system-i386 Regression tested on qemu-system-mips (malta profile) Tested PAE and devinfo on virtualbox (live CD) Special thanks to bz for his testing on ARM. Reviewed By: bz, jhb (previous) Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
new_start = ummax(start, rle->start);
new_end = ummin(end, rle->end);
if (new_start > new_end ||
new_start + count - 1 > new_end ||
new_start + count < new_start)
continue;
r = bus_generic_alloc_resource(hr->hr_pcib, dev, type, rid,
new_start, new_end, count, flags);
if (r != NULL) {
if (bootverbose)
device_printf(hr->hr_pcib,
Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. On some architectures, u_long isn't large enough for resource definitions. Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but type `long' is only 32-bit. This extends rman's resources to uintmax_t. With this change, any resource can feasibly be placed anywhere in physical memory (within the constraints of the driver). Why uintmax_t and not something machine dependent, or uint64_t? Though it's possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on 32-bit architectures. 64-bit architectures should have plenty of RAM to absorb the increase on resource sizes if and when this occurs, and the number of resources on memory-constrained systems should be sufficiently small as to not pose a drastic overhead. That being said, uintmax_t was chosen for source clarity. If it's specified as uint64_t, all printf()-like calls would either need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t aren't horrible, but it would also bake into the API for resource_list_print_type() either a hidden assumption that entries get cast to uintmax_t for printing, or these calls would need the PRI*64 macros. Since source code is meant to be read more often than written, I chose the clearest path of simply using uintmax_t. Tested on a PowerPC p5020-based board, which places all device resources in 0xfxxxxxxxx, and has 8GB RAM. Regression tested on qemu-system-i386 Regression tested on qemu-system-mips (malta profile) Tested PAE and devinfo on virtualbox (live CD) Special thanks to bz for his testing on ARM. Reviewed By: bz, jhb (previous) Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
"allocated type %d (%#jx-%#jx) for rid %x of %s\n",
type, rman_get_start(r), rman_get_end(r),
*rid, pcib_child_name(dev));
return (r);
}
}
/*
* If we failed to find a prefetch range for a memory
* resource, try again without prefetch.
*/
if (flags & RF_PREFETCHABLE) {
flags &= ~RF_PREFETCHABLE;
rle = resource_list_find(&hr->hr_rl, type, 0);
goto restart;
}
return (NULL);
}
int
pcib_host_res_adjust(struct pcib_host_resources *hr, device_t dev, int type,
struct resource *r, rman_res_t start, rman_res_t end)
{
struct resource_list_entry *rle;
rle = resource_list_find(&hr->hr_rl, type, 0);
if (rle == NULL) {
/*
* No decoding ranges for this resource type, just pass
* the request up to the parent.
*/
return (bus_generic_adjust_resource(hr->hr_pcib, dev, type, r,
start, end));
}
/* Only allow adjustments that stay within a decoded range. */
for (; rle != NULL; rle = STAILQ_NEXT(rle, link)) {
if (rle->start <= start && rle->end >= end)
return (bus_generic_adjust_resource(hr->hr_pcib, dev,
type, r, start, end));
}
return (ERANGE);
}
#ifdef PCI_RES_BUS
struct pci_domain {
int pd_domain;
struct rman pd_bus_rman;
TAILQ_ENTRY(pci_domain) pd_link;
};
static TAILQ_HEAD(, pci_domain) domains = TAILQ_HEAD_INITIALIZER(domains);
/*
* Each PCI domain maintains its own resource manager for PCI bus
* numbers in that domain. Domain objects are created on first use.
* Host to PCI bridge drivers and PCI-PCI bridge drivers should
* allocate their bus ranges from their domain.
*/
static struct pci_domain *
pci_find_domain(int domain)
{
struct pci_domain *d;
char buf[64];
int error;
TAILQ_FOREACH(d, &domains, pd_link) {
if (d->pd_domain == domain)
return (d);
}
snprintf(buf, sizeof(buf), "PCI domain %d bus numbers", domain);
d = malloc(sizeof(*d) + strlen(buf) + 1, M_DEVBUF, M_WAITOK | M_ZERO);
d->pd_domain = domain;
d->pd_bus_rman.rm_start = 0;
d->pd_bus_rman.rm_end = PCI_BUSMAX;
d->pd_bus_rman.rm_type = RMAN_ARRAY;
strcpy((char *)(d + 1), buf);
d->pd_bus_rman.rm_descr = (char *)(d + 1);
error = rman_init(&d->pd_bus_rman);
if (error == 0)
error = rman_manage_region(&d->pd_bus_rman, 0, PCI_BUSMAX);
if (error)
panic("Failed to initialize PCI domain %d rman", domain);
TAILQ_INSERT_TAIL(&domains, d, pd_link);
return (d);
}
struct resource *
pci_domain_alloc_bus(int domain, device_t dev, int *rid, rman_res_t start,
rman_res_t end, rman_res_t count, u_int flags)
{
struct pci_domain *d;
struct resource *res;
if (domain < 0 || domain > PCI_DOMAINMAX)
return (NULL);
d = pci_find_domain(domain);
res = rman_reserve_resource(&d->pd_bus_rman, start, end, count, flags,
dev);
if (res == NULL)
return (NULL);
rman_set_rid(res, *rid);
return (res);
}
int
pci_domain_adjust_bus(int domain, device_t dev, struct resource *r,
rman_res_t start, rman_res_t end)
{
#ifdef INVARIANTS
struct pci_domain *d;
#endif
if (domain < 0 || domain > PCI_DOMAINMAX)
return (EINVAL);
#ifdef INVARIANTS
d = pci_find_domain(domain);
KASSERT(rman_is_region_manager(r, &d->pd_bus_rman), ("bad resource"));
#endif
return (rman_adjust_resource(r, start, end));
}
int
pci_domain_release_bus(int domain, device_t dev, int rid, struct resource *r)
{
#ifdef INVARIANTS
struct pci_domain *d;
#endif
if (domain < 0 || domain > PCI_DOMAINMAX)
return (EINVAL);
#ifdef INVARIANTS
d = pci_find_domain(domain);
KASSERT(rman_is_region_manager(r, &d->pd_bus_rman), ("bad resource"));
#endif
return (rman_release_resource(r));
}
#endif /* PCI_RES_BUS */
#endif /* NEW_PCIB */