freebsd-nq/sys/i386/isa/alog.c

666 lines
21 KiB
C
Raw Normal View History

/*
* Copyright (c) 1997 Jamil J. Weatherbee
* All rights reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Industrial Computer Source model AIO8-P
* 8 channel, moderate speed analog to digital converter board with
* 128 channel MUX capability via daisy chained AT-16P units
* alog.c, character device driver, last revised December 9 1997
* See http://www.indcompsrc.com/products/data/html/aio8g-p.html
* http://www.indcompsrc.com/products/data/html/at16-p.html
*
* Written by: Jamil J. Weatherbee <jamil@freebsd.org>
*
*/
/* Include Files */
#include "alog.h"
#if NALOG > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/poll.h>
#include <sys/vnode.h>
#include <sys/filio.h>
#include <machine/clock.h>
#include <i386/isa/isa.h>
#include <i386/isa/isa_device.h>
#include <sys/alogio.h>
#include <sys/dataacq.h>
#ifdef DEVFS
#include <sys/devfsext.h>
#endif
/* Local Defines */
/* Tests have shown that increasing the fifo size
* beyond 64 entries for this particular piece of hardware is
* unproductive */
#ifdef ALOG_FIFOSIZE
#define FIFOSIZE ALOG_FIFOSIZE
#else
#define FIFOSIZE 64
#endif
#ifdef ALOG_FIFO_TRIGGER
#define DEFAULT_FIFO_TRIGGER ALOG_FIFO_TRIGGER
#else
#define DEFAULT_FIFO_TRIGGER 1
#endif
#ifdef ALOG_CHANNELS
#define NUMCHANNELS ALOG_CHANNELS
#else
#define NUMCHANNELS 128
#endif
#ifdef ALOG_TIMO
#define READTIMO ALOG_TIMO
#else
#define READTIMO (MAX_MICRO_PERIOD*NUMCHANNELS/500000*hz)
#endif
#define CDEV_MAJOR 86
#define NUMPORTS 8
#define MAXUNITS 2
#define NUMIMUXES 8
#define ADLOW 0x0
#define ADHIGH 0x1
#define STATUS 0x2
#define CNTR0 0x4
#define CNTR1 0x5
#define CNTR2 0x6
#define CNTRCNTRL 0x7
#define DEVFORMAT "alog%d%c%d"
#define CLOCK2FREQ 4.165
#define MIN_MICRO_PERIOD 25
#define MAX_MICRO_PERIOD (65535/CLOCK2FREQ*PRIMARY_STATES)
#define DEFAULT_MICRO_PERIOD MAX_MICRO_PERIOD
#define READMAXTRIG 0.75*FIFOSIZE
#define ALOGPRI PRIBIO
#define ALOGMSG "alogio"
#define PRIMARY_STATES 2 /* Setup and conversion are clock tick consuming */
#define STATE_SETUP 0
#define STATE_CONVERT 1
#define STATE_READ 2
/* Notes on interrupt driven A/D conversion:
* On the AIO8-P, interrupt driven conversion (the only type supported by this
* driver) is facilitated through 8253 timer #2. In order for interrrupts to
* be generated you must connect line 6 to line 24 (counter 2 output to
* interrupt input) and line 23 to line 29 (counter 2 gate to +5VDC).
* Due to the design of the AIO8-P this precludes the use of programmable
* gain control.
*/
/* mode bits for the status register */
#define EOC 0x80
#define IEN 0x08
#define IMUXMASK 0x07
#define EMUXMASK 0xf0
/* mode bits for counter controller */
#define LD2MODE4 0xb8
/* Minor allocations:
* UCCCCMMM
* U: board unit (0-1)
* CCCC: external multiplexer channel (0-15) (on AT-16P units)
* MMM: internal multiplexer channel (0-7) (on AIO8-P card)
*/
#define UNIT(dev) ((minor(dev) & 0x80) >> 7)
#define CHANNEL(dev) (minor(dev) & 0x7f)
#define EMUX(chan) ((chan & 0x78) >> 3)
#define EMUXMAKE(chan) ((chan & 0x78) << 1)
#define IMUX(chan) (chan & 0x07)
#define LMINOR(unit, chan) ((unit << 7)+chan)
/* port statuses */
#define STATUS_UNUSED 0
#define STATUS_INUSE 1
#define STATUS_STOPPED 2
#define STATUS_INIT 3
/* Type definitions */
typedef struct
{
short status; /* the status of this chan */
struct selinfo readpoll; /* the poll() info */
u_short fifo[FIFOSIZE]; /* fifo for this chan */
int fifostart, fifoend; /* the ptrs showing where info is stored in fifo */
int fifosize, fifotrig; /* the current and trigger size of the fifo */
void *devfs_token; /* the devfs token for this chan */
int nextchan;
} talog_chan;
typedef struct
{
struct isa_device *isaunit; /* ptr to isa device information */
talog_chan chan[NUMCHANNELS]; /* the device nodes */
int curchan; /* the current chan being intr handled */
int firstchan; /* the first chan to go to in list */
int state; /* is the node in setup or convert mode */
long microperiod; /* current microsecond period setting */
u_char perlo, perhi; /* current values to send to clock 2 after every intr */
} talog_unit;
/* Function Prototypes */
static int alog_probe (struct isa_device *idp); /* Check for alog board */
static int alog_attach (struct isa_device *idp); /* Take alog board */
static int sync_clock2 (int unit, long period); /* setup clock 2 period */
static int putfifo (talog_chan *pchan, u_short fifoent);
static int alog_open (dev_t dev, int oflags, int devtype, struct proc *p);
static int alog_close (dev_t dev, int fflag, int devtype, struct proc *p);
static int alog_ioctl (dev_t dev, int cmd, caddr_t data,
int fflag, struct proc *p);
static int alog_read (dev_t dev, struct uio *uio, int ioflag);
static int alog_poll (dev_t dev, int events, struct proc *p);
/* Global Data */
static int alog_devsw_installed = 0; /* Protect against reinit multiunit */
static talog_unit *alog_unit[NALOG]; /* data structs for each unit */
/* Character device switching structure */
static struct cdevsw alog_cdevsw = { alog_open, alog_close, alog_read,
nowrite, alog_ioctl, nostop, noreset,
nodevtotty, alog_poll, nommap,
nostrategy, "alog", NULL, -1 };
/* Structure expected to tell how to probe and attach the driver
* Must be published externally (cannot be static) */
struct isa_driver alogdriver = { alog_probe, alog_attach, "alog", 0 };
/* handle the ioctls */
static int alog_ioctl (dev_t dev, int cmd, caddr_t data,
int fflag, struct proc *p)
{
int unit = UNIT(dev);
int chan = CHANNEL(dev);
talog_unit *info = alog_unit[unit];
int s;
switch (cmd)
{
case FIONBIO: return 0; /* this allows for non-blocking ioctls */
case AD_NCHANS_GET: *(int *)data = NUMCHANNELS;
return 0;
case AD_FIFOSIZE_GET: *(int *)data = FIFOSIZE;
return 0;
case AD_FIFO_TRIGGER_GET: s = spltty();
*(int *)data = info->chan[chan].fifotrig;
splx(s);
return 0;
case AD_FIFO_TRIGGER_SET:
s = spltty();
if ((*(int *)data < 1) || (*(int *)data > FIFOSIZE))
{
splx(s);
return EPERM;
}
info->chan[chan].fifotrig = *(int *)data;
splx(s);
return 0;
case AD_STOP: s = spltty();
info->chan[chan].status = STATUS_STOPPED;
splx(s);
return 0;
case AD_START: s = spltty();
info->chan[chan].status = STATUS_INUSE;
splx(s);
return 0;
case AD_MICRO_PERIOD_SET:
s = spltty();
if (sync_clock2 (unit, *(long *) data))
{
splx(s);
return EPERM;
}
splx(s);
return 0;
case AD_MICRO_PERIOD_GET: s = spltty();
*(long *)data = info->microperiod;
splx(s);
return 0;
}
return ENOTTY;
}
/* handle poll() based read polling */
static int alog_poll (dev_t dev, int events, struct proc *p)
{
int unit = UNIT(dev);
int chan = CHANNEL(dev);
talog_unit *info = alog_unit[unit];
int s;
s = spltty();
if (events & (POLLIN | POLLRDNORM)) /* if polling for any/normal data */
if (info->chan[chan].fifosize >= info->chan[chan].fifotrig)
{
splx(s);
return events & (POLLIN | POLLRDNORM); /* ready for any/read */
}
else
{
/* record this request */
selrecord (p, &(info->chan[chan].readpoll));
splx(s);
return 0; /* not ready, yet */
}
splx(s);
return 0; /* not ready (any I never will be) */
}
/* how to read from the board */
static int alog_read (dev_t dev, struct uio *uio, int ioflag)
{
int unit = UNIT(dev);
int chan = CHANNEL(dev);
talog_unit *info = alog_unit[unit];
int s, oldtrig, toread, err = 0;
s = spltty();
oldtrig = info->chan[chan].fifotrig; /* save official trigger value */
while (uio->uio_resid >= sizeof(u_short)) /* while uio has space */
{
if (!info->chan[chan].fifosize) /* if we have an empty fifo */
{
if (ioflag & IO_NDELAY) /* exit if we are non-blocking */
{ err = EWOULDBLOCK;
break;
}
/* Start filling fifo on first blocking read */
if (info->chan[chan].status == STATUS_INIT)
info->chan[chan].status = STATUS_INUSE;
/* temporarily adjust the fifo trigger to be optimal size */
info->chan[chan].fifotrig =
min (READMAXTRIG, uio->uio_resid / sizeof(u_short));
/* lets sleep until we have some io available or timeout */
err = tsleep (&(info->chan[chan].fifo), ALOGPRI | PCATCH, ALOGMSG,
info->chan[chan].fifotrig*READTIMO);
if (err == EWOULDBLOCK)
{ printf (DEVFORMAT ": read timeout\n", unit,
'a'+EMUX(chan), IMUX(chan));
}
if (err == ERESTART) err = EINTR; /* don't know how to restart */
if (err) break; /* exit if any kind of error or signal */
}
/* ok, now if we got here there is something to read from the fifo */
/* calculate how many entries we can read out from the fifostart
* pointer */
toread = min (uio->uio_resid / sizeof(u_short),
min (info->chan[chan].fifosize,
FIFOSIZE - info->chan[chan].fifostart));
/* perform the move, if there is an error then exit */
if (err = uiomove((caddr_t)
&(info->chan[chan].fifo[info->chan[chan].fifostart]),
toread * sizeof(u_short), uio)) break;
info->chan[chan].fifosize -= toread; /* fifo this much smaller */
info->chan[chan].fifostart += toread; /* we got this many more */
if (info->chan[chan].fifostart == FIFOSIZE)
info->chan[chan].fifostart = 0; /* wrap around fifostart */
}
info->chan[chan].fifotrig = oldtrig; /* restore trigger changes */
splx(s);
return err;
}
/* open a channel */
static int alog_open (dev_t dev, int oflags, int devtype, struct proc *p)
{
int unit = UNIT(dev); /* get unit no */
int chan = CHANNEL(dev); /* get channel no */
talog_unit *info;
int s; /* priority */
int cur;
if ((unit >= NALOG) || (unit >= MAXUNITS) || (chan >= NUMCHANNELS))
return ENXIO; /* unit and channel no ok ? */
if (!alog_unit[unit]) return ENXIO; /* unit attached */
info = alog_unit[unit]; /* ok, this is valid now */
if (info->chan[chan].status) return EBUSY; /* channel busy */
if (oflags & FREAD)
{
s=spltty();
info->chan[chan].status = STATUS_INIT; /* channel open, read waiting */
info->chan[chan].fifostart = info->chan[chan].fifoend =
info->chan[chan].fifosize = 0;/* fifo empty */
info->chan[chan].fifotrig = DEFAULT_FIFO_TRIGGER;
if (info->firstchan < 0) /* if empty chain */
{
info->firstchan = info->curchan = chan; /* rev up the list */
info->chan[chan].nextchan = -1; /* end of the list */
}
else /* non empty list must insert */
{
if (chan < info->firstchan) /* this one must become first in list */
{
info->chan[chan].nextchan = info->firstchan;
info->firstchan = chan;
}
else /* insert this one as second - last in chan list */
{
cur = info->firstchan;
/* traverse list as long as cur is less than chan and cur is
* not last in list */
while ((info->chan[cur].nextchan < chan) &&
(info->chan[cur].nextchan >= 0))
cur = info->chan[cur].nextchan;
/* now cur should point to the entry right before yours */
info->chan[chan].nextchan = info->chan[cur].nextchan;
info->chan[cur].nextchan = chan; /* insert yours in */
}
}
splx(s);
return 0; /* open successful */
}
return EPERM; /* this is a read only device */
}
/* close a channel */
static int alog_close (dev_t dev, int fflag, int devtype, struct proc *p)
{
int unit = UNIT(dev);
int chan = CHANNEL(dev);
talog_unit *info = alog_unit[unit];
int s;
int cur;
s = spltty();
info->chan[chan].status = STATUS_UNUSED;
/* what if we are in the middle of a conversion ?
* then smoothly get us out of it: */
if (info->curchan == chan)
{ /* if we are last in list set curchan to first in list */
if ((info->curchan = info->chan[chan].nextchan) < 0)
info->curchan = info->firstchan;
info->state = STATE_SETUP;
}
/* if this is the first channel, then make the second channel the first
* channel (note that if this is also the only channel firstchan becomes
* -1 and so the list is marked as empty */
if (chan == info->firstchan)
info->firstchan = info->chan[chan].nextchan;
else /* ok, so there must be at least 2 channels (and it is not the first) */
{
cur = info->firstchan;
/* find the entry before it (which must exist if you are closing) */
while (info->chan[cur].nextchan < chan)
cur = info->chan[cur].nextchan;
/* at this point we must have the entry before ours */
info->chan[cur].nextchan = info->chan[chan].nextchan; /* give our link */
}
splx(s);
return 0; /* close always successful */
}
/* The probing routine - returns number of bytes needed */
static int alog_probe (struct isa_device *idp)
{
int unit = idp->id_unit; /* this device unit number */
int iobase = idp->id_iobase; /* the base address of the unit */
int addr;
if ((unit < 0) || (unit >= NALOG) || (unit >= MAXUNITS))
{
printf ("alog: invalid unit number (%d)\n", unit);
return 0;
}
/* the unit number is ok, lets check if used */
if (alog_unit[unit])
{
printf ("alog: unit (%d) already attached\n", unit);
return 0;
}
if (inb (iobase+STATUS) & EOC) return 0; /* End of conv bit should be 0 */
for (addr=0; addr<NUMIMUXES; addr++)
{
outb (iobase+STATUS, EMUXMASK|addr);/* output ones to upper nibbl+addr */
/* get back a zero in MSB and the addr where you put it */
if ((inb (iobase+STATUS) & (EOC|IMUXMASK)) != addr) return 0;
}
return NUMPORTS; /* this device needs this many ports */
}
/* setup the info structure correctly for reloading clock 2 after interrupt */
static int sync_clock2 (int unit, long period)
{
int clockper;
talog_unit *info = alog_unit[unit];
if ((period > MAX_MICRO_PERIOD) || (period < MIN_MICRO_PERIOD))
return -1; /* error period too long */
info->microperiod = period; /* record the period */
clockper = (CLOCK2FREQ * period) / PRIMARY_STATES;
info->perlo = clockper & 0xff; /* least sig byte of clock period */
info->perhi = ((clockper & 0xff00) >> 8); /* most sig byte of clock period */
return 0;
}
/* The attachment routine - returns true on success */
static int alog_attach (struct isa_device *idp)
{
int unit = idp->id_unit; /* this device unit number */
int iobase = idp->id_iobase; /* the base address of the unit */
talog_unit *info; /* pointer to driver specific info for unit */
int chan; /* the channel used for creating devfs nodes */
if (!(info = malloc(sizeof(*info), M_DEVBUF, M_NOWAIT)))
{
printf ("alog%d: cannot allocate driver storage\n", unit);
return 0;
}
alog_unit[unit] = info; /* make sure to save the pointer */
bzero (info, sizeof(*info)); /* clear info structure to all false */
info->isaunit = idp; /* store ptr to isa device information */
sync_clock2 (unit, DEFAULT_MICRO_PERIOD); /* setup perlo and perhi */
info->firstchan = -1; /* channel lists are empty */
/* insert devfs nodes */
#ifdef DEVFS
for (chan=0; chan<NUMCHANNELS; chan++)
info->chan[chan].devfs_token =
devfs_add_devswf(&alog_cdevsw, LMINOR(unit, chan), DV_CHR,
UID_ROOT, GID_WHEEL, 0400, DEVFORMAT,
unit, 'a'+EMUX(chan), IMUX(chan));
#endif
printf ("alog%d: %d channels, %d bytes/FIFO, %d entry trigger\n",
unit, NUMCHANNELS, FIFOSIZE*sizeof(u_short),
DEFAULT_FIFO_TRIGGER);
alogintr (unit); /* start the periodic interrupting process */
return 1; /* obviously successful */
}
/* Unit interrupt handling routine (interrupts generated by clock 2) */
void alogintr (int unit)
{
talog_unit *info = alog_unit[unit];
int iobase = info->isaunit->id_iobase;
u_short fifoent;
if (info->firstchan >= 0) /* ? is there even a chan list to traverse */
switch (info->state)
{
case STATE_READ:
if (info->chan[info->curchan].status == STATUS_INUSE)
{
if (inb (iobase+STATUS) & EOC) /* check that conversion finished */
printf (DEVFORMAT ": incomplete conversion\n", unit,
'a'+EMUX(info->curchan), IMUX(info->curchan));
else /* conversion is finished (should always be) */
{
fifoent = (inb (iobase+ADHIGH) << 8) +
inb (iobase+ADLOW);
if (putfifo(&(info->chan[info->curchan]), fifoent))
{
printf (DEVFORMAT ": fifo overflow\n", unit,
'a'+EMUX(info->curchan), IMUX(info->curchan));
}
if (info->chan[info->curchan].fifosize >=
info->chan[info->curchan].fifotrig)
{
/* if we've reached trigger levels */
selwakeup (&(info->chan[info->curchan].readpoll));
wakeup (&(info->chan[info->curchan].fifo));
}
}
}
/* goto setup state for next channel on list */
if ((info->curchan = info->chan[info->curchan].nextchan) < 0)
info->curchan = info->firstchan;
/* notice lack of break here this implys a STATE_SETUP */
case STATE_SETUP: /* set the muxes and let them settle */
#if NUMCHANNELS > NUMIMUXES /* only do this if using external muxes */
outb (iobase+STATUS,
EMUXMAKE(info->curchan) | IMUX(info->curchan) | IEN);
info->state = STATE_CONVERT;
break;
#endif
case STATE_CONVERT:
outb (iobase+STATUS,
EMUXMAKE(info->curchan) | IMUX(info->curchan) | IEN);
outb (iobase+ADHIGH, 0); /* start the conversion */
info->state = STATE_READ;
break;
}
else /* this is kind of like an idle mode */
{
outb (iobase+STATUS, IEN); /* no list keep getting interrupts though */
/* since we have no open channels spin clock rate down to
* minimum to save interrupt overhead */
outb (iobase+CNTRCNTRL, LD2MODE4); /* counter 2 to mode 4 strobe */
outb (iobase+CNTR2, 0xff); /* longest period we can generate */
outb (iobase+CNTR2, 0xff);
return;
}
outb (iobase+CNTRCNTRL, LD2MODE4); /* counter 2 to mode 4 strobe */
outb (iobase+CNTR2, info->perlo); /* low part of the period count */
outb (iobase+CNTR2, info->perhi); /* high part of the period count */
}
/* this will put an entry in fifo, returns 1 if the first item in
* fifo was wiped (overflow) or 0 if everything went fine */
static int putfifo (talog_chan *pchan, u_short fifoent)
{
pchan->fifo[pchan->fifoend] = fifoent; /* insert the entry in */
pchan->fifoend++; /* one more in fifo */
if (pchan->fifoend == FIFOSIZE) pchan->fifoend = 0; /* wrap around */
/* note: I did intend to write over the oldest entry on overflow */
if (pchan->fifosize == FIFOSIZE) /* overflowing state already */
{
pchan->fifostart++;
if (pchan->fifostart == FIFOSIZE) pchan->fifostart = 0;
return 1; /* we overflowed */
}
pchan->fifosize++; /* actually one bigger, else same size */
return 0; /* went in just fine */
}
/* Driver initialization */
static void alog_drvinit (void *unused)
{
dev_t dev; /* Type for holding device major/minor numbers (int) */
if (!alog_devsw_installed)
{
dev = makedev (CDEV_MAJOR, 0); /* description of device major */
cdevsw_add (&dev, &alog_cdevsw, NULL); /* put driver in cdev table */
alog_devsw_installed=1;
}
}
/* System initialization call instance */
SYSINIT (alogdev, SI_SUB_DRIVERS, SI_ORDER_MIDDLE+CDEV_MAJOR,
alog_drvinit,NULL);
#endif