freebsd-nq/sys/net80211/ieee80211_mesh.c

3637 lines
106 KiB
C
Raw Normal View History

Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/*-
* Copyright (c) 2009 The FreeBSD Foundation
* All rights reserved.
*
* This software was developed by Rui Paulo under sponsorship from the
* FreeBSD Foundation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#ifdef __FreeBSD__
__FBSDID("$FreeBSD$");
#endif
/*
* IEEE 802.11s Mesh Point (MBSS) support.
*
* Based on March 2009, D3.0 802.11s draft spec.
*/
#include "opt_inet.h"
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/endian.h>
#include <sys/errno.h>
#include <sys/proc.h>
#include <sys/sysctl.h>
#include <net/bpf.h>
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#include <net/if.h>
#include <net/if_var.h>
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#include <net/if_media.h>
#include <net/if_llc.h>
#include <net/ethernet.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_action.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#include <net80211/ieee80211_input.h>
#include <net80211/ieee80211_mesh.h>
static void mesh_rt_flush_invalid(struct ieee80211vap *);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static int mesh_select_proto_path(struct ieee80211vap *, const char *);
static int mesh_select_proto_metric(struct ieee80211vap *, const char *);
static void mesh_vattach(struct ieee80211vap *);
static int mesh_newstate(struct ieee80211vap *, enum ieee80211_state, int);
static void mesh_rt_cleanup_cb(void *);
static void mesh_gatemode_setup(struct ieee80211vap *);
static void mesh_gatemode_cb(void *);
static void mesh_linkchange(struct ieee80211_node *,
enum ieee80211_mesh_mlstate);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static void mesh_checkid(void *, struct ieee80211_node *);
static uint32_t mesh_generateid(struct ieee80211vap *);
static int mesh_checkpseq(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN], uint32_t);
static void mesh_transmit_to_gate(struct ieee80211vap *, struct mbuf *,
struct ieee80211_mesh_route *);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static void mesh_forward(struct ieee80211vap *, struct mbuf *,
const struct ieee80211_meshcntl *);
static int mesh_input(struct ieee80211_node *, struct mbuf *, int, int);
static void mesh_recv_mgmt(struct ieee80211_node *, struct mbuf *, int,
int, int);
static void mesh_recv_ctl(struct ieee80211_node *, struct mbuf *, int);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static void mesh_peer_timeout_setup(struct ieee80211_node *);
static void mesh_peer_timeout_backoff(struct ieee80211_node *);
static void mesh_peer_timeout_cb(void *);
static __inline void
mesh_peer_timeout_stop(struct ieee80211_node *);
static int mesh_verify_meshid(struct ieee80211vap *, const uint8_t *);
static int mesh_verify_meshconf(struct ieee80211vap *, const uint8_t *);
static int mesh_verify_meshpeer(struct ieee80211vap *, uint8_t,
const uint8_t *);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
uint32_t mesh_airtime_calc(struct ieee80211_node *);
/*
* Timeout values come from the specification and are in milliseconds.
*/
static SYSCTL_NODE(_net_wlan, OID_AUTO, mesh, CTLFLAG_RD, 0,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
"IEEE 802.11s parameters");
static int ieee80211_mesh_gateint = -1;
SYSCTL_PROC(_net_wlan_mesh, OID_AUTO, gateint, CTLTYPE_INT | CTLFLAG_RW,
&ieee80211_mesh_gateint, 0, ieee80211_sysctl_msecs_ticks, "I",
"mesh gate interval (ms)");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static int ieee80211_mesh_retrytimeout = -1;
SYSCTL_PROC(_net_wlan_mesh, OID_AUTO, retrytimeout, CTLTYPE_INT | CTLFLAG_RW,
&ieee80211_mesh_retrytimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
"Retry timeout (msec)");
static int ieee80211_mesh_holdingtimeout = -1;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
SYSCTL_PROC(_net_wlan_mesh, OID_AUTO, holdingtimeout, CTLTYPE_INT | CTLFLAG_RW,
&ieee80211_mesh_holdingtimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
"Holding state timeout (msec)");
static int ieee80211_mesh_confirmtimeout = -1;
SYSCTL_PROC(_net_wlan_mesh, OID_AUTO, confirmtimeout, CTLTYPE_INT | CTLFLAG_RW,
&ieee80211_mesh_confirmtimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
"Confirm state timeout (msec)");
static int ieee80211_mesh_backofftimeout = -1;
SYSCTL_PROC(_net_wlan_mesh, OID_AUTO, backofftimeout, CTLTYPE_INT | CTLFLAG_RW,
&ieee80211_mesh_backofftimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
"Backoff timeout (msec). This is to throutles peering forever when "
"not receving answer or is rejected by a neighbor");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static int ieee80211_mesh_maxretries = 2;
SYSCTL_INT(_net_wlan_mesh, OID_AUTO, maxretries, CTLFLAG_RW,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
&ieee80211_mesh_maxretries, 0,
"Maximum retries during peer link establishment");
static int ieee80211_mesh_maxholding = 2;
SYSCTL_INT(_net_wlan_mesh, OID_AUTO, maxholding, CTLFLAG_RW,
&ieee80211_mesh_maxholding, 0,
"Maximum times we are allowed to transition to HOLDING state before "
"backinoff during peer link establishment");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static const uint8_t broadcastaddr[IEEE80211_ADDR_LEN] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
static ieee80211_recv_action_func mesh_recv_action_meshpeering_open;
static ieee80211_recv_action_func mesh_recv_action_meshpeering_confirm;
static ieee80211_recv_action_func mesh_recv_action_meshpeering_close;
static ieee80211_recv_action_func mesh_recv_action_meshlmetric;
static ieee80211_recv_action_func mesh_recv_action_meshgate;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static ieee80211_send_action_func mesh_send_action_meshpeering_open;
static ieee80211_send_action_func mesh_send_action_meshpeering_confirm;
static ieee80211_send_action_func mesh_send_action_meshpeering_close;
static ieee80211_send_action_func mesh_send_action_meshlmetric;
static ieee80211_send_action_func mesh_send_action_meshgate;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static const struct ieee80211_mesh_proto_metric mesh_metric_airtime = {
.mpm_descr = "AIRTIME",
.mpm_ie = IEEE80211_MESHCONF_METRIC_AIRTIME,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
.mpm_metric = mesh_airtime_calc,
};
static struct ieee80211_mesh_proto_path mesh_proto_paths[4];
static struct ieee80211_mesh_proto_metric mesh_proto_metrics[4];
#define RT_ENTRY_LOCK(rt) mtx_lock(&(rt)->rt_lock)
#define RT_ENTRY_LOCK_ASSERT(rt) mtx_assert(&(rt)->rt_lock, MA_OWNED)
#define RT_ENTRY_UNLOCK(rt) mtx_unlock(&(rt)->rt_lock)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#define MESH_RT_LOCK(ms) mtx_lock(&(ms)->ms_rt_lock)
#define MESH_RT_LOCK_ASSERT(ms) mtx_assert(&(ms)->ms_rt_lock, MA_OWNED)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#define MESH_RT_UNLOCK(ms) mtx_unlock(&(ms)->ms_rt_lock)
MALLOC_DEFINE(M_80211_MESH_PREQ, "80211preq", "802.11 MESH Path Request frame");
MALLOC_DEFINE(M_80211_MESH_PREP, "80211prep", "802.11 MESH Path Reply frame");
MALLOC_DEFINE(M_80211_MESH_PERR, "80211perr", "802.11 MESH Path Error frame");
/* The longer one of the lifetime should be stored as new lifetime */
#define MESH_ROUTE_LIFETIME_MAX(a, b) (a > b ? a : b)
MALLOC_DEFINE(M_80211_MESH_RT, "80211mesh_rt", "802.11s routing table");
MALLOC_DEFINE(M_80211_MESH_GT_RT, "80211mesh_gt", "802.11s known gates table");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/*
* Helper functions to manipulate the Mesh routing table.
*/
static struct ieee80211_mesh_route *
mesh_rt_find_locked(struct ieee80211_mesh_state *ms,
const uint8_t dest[IEEE80211_ADDR_LEN])
{
struct ieee80211_mesh_route *rt;
MESH_RT_LOCK_ASSERT(ms);
TAILQ_FOREACH(rt, &ms->ms_routes, rt_next) {
if (IEEE80211_ADDR_EQ(dest, rt->rt_dest))
return rt;
}
return NULL;
}
static struct ieee80211_mesh_route *
mesh_rt_add_locked(struct ieee80211vap *vap,
const uint8_t dest[IEEE80211_ADDR_LEN])
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt;
KASSERT(!IEEE80211_ADDR_EQ(broadcastaddr, dest),
("%s: adding broadcast to the routing table", __func__));
MESH_RT_LOCK_ASSERT(ms);
rt = malloc(ALIGN(sizeof(struct ieee80211_mesh_route)) +
ms->ms_ppath->mpp_privlen, M_80211_MESH_RT, M_NOWAIT | M_ZERO);
if (rt != NULL) {
rt->rt_vap = vap;
IEEE80211_ADDR_COPY(rt->rt_dest, dest);
rt->rt_priv = (void *)ALIGN(&rt[1]);
mtx_init(&rt->rt_lock, "MBSS_RT", "802.11s route entry", MTX_DEF);
callout_init(&rt->rt_discovery, CALLOUT_MPSAFE);
rt->rt_updtime = ticks; /* create time */
TAILQ_INSERT_TAIL(&ms->ms_routes, rt, rt_next);
}
return rt;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
struct ieee80211_mesh_route *
ieee80211_mesh_rt_find(struct ieee80211vap *vap,
const uint8_t dest[IEEE80211_ADDR_LEN])
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt;
MESH_RT_LOCK(ms);
rt = mesh_rt_find_locked(ms, dest);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
MESH_RT_UNLOCK(ms);
return rt;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
struct ieee80211_mesh_route *
ieee80211_mesh_rt_add(struct ieee80211vap *vap,
const uint8_t dest[IEEE80211_ADDR_LEN])
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt;
KASSERT(ieee80211_mesh_rt_find(vap, dest) == NULL,
("%s: duplicate entry in the routing table", __func__));
KASSERT(!IEEE80211_ADDR_EQ(vap->iv_myaddr, dest),
("%s: adding self to the routing table", __func__));
MESH_RT_LOCK(ms);
rt = mesh_rt_add_locked(vap, dest);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
MESH_RT_UNLOCK(ms);
return rt;
}
/*
* Update the route lifetime and returns the updated lifetime.
* If new_lifetime is zero and route is timedout it will be invalidated.
* new_lifetime is in msec
*/
int
ieee80211_mesh_rt_update(struct ieee80211_mesh_route *rt, int new_lifetime)
{
int timesince, now;
uint32_t lifetime = 0;
KASSERT(rt != NULL, ("route is NULL"));
now = ticks;
RT_ENTRY_LOCK(rt);
/* dont clobber a proxy entry gated by us */
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY && rt->rt_nhops == 0) {
RT_ENTRY_UNLOCK(rt);
return rt->rt_lifetime;
}
timesince = ticks_to_msecs(now - rt->rt_updtime);
rt->rt_updtime = now;
if (timesince >= rt->rt_lifetime) {
if (new_lifetime != 0) {
rt->rt_lifetime = new_lifetime;
}
else {
rt->rt_flags &= ~IEEE80211_MESHRT_FLAGS_VALID;
rt->rt_lifetime = 0;
}
} else {
/* update what is left of lifetime */
rt->rt_lifetime = rt->rt_lifetime - timesince;
rt->rt_lifetime = MESH_ROUTE_LIFETIME_MAX(
new_lifetime, rt->rt_lifetime);
}
lifetime = rt->rt_lifetime;
RT_ENTRY_UNLOCK(rt);
return lifetime;
}
/*
* Add a proxy route (as needed) for the specified destination.
*/
void
ieee80211_mesh_proxy_check(struct ieee80211vap *vap,
const uint8_t dest[IEEE80211_ADDR_LEN])
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt;
MESH_RT_LOCK(ms);
rt = mesh_rt_find_locked(ms, dest);
if (rt == NULL) {
rt = mesh_rt_add_locked(vap, dest);
if (rt == NULL) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, dest,
"%s", "unable to add proxy entry");
vap->iv_stats.is_mesh_rtaddfailed++;
} else {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, dest,
"%s", "add proxy entry");
IEEE80211_ADDR_COPY(rt->rt_mesh_gate, vap->iv_myaddr);
IEEE80211_ADDR_COPY(rt->rt_nexthop, vap->iv_myaddr);
rt->rt_flags |= IEEE80211_MESHRT_FLAGS_VALID
| IEEE80211_MESHRT_FLAGS_PROXY;
}
} else if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0) {
KASSERT(rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY,
("no proxy flag for poxy entry"));
struct ieee80211com *ic = vap->iv_ic;
/*
* Fix existing entry created by received frames from
* stations that have some memory of dest. We also
* flush any frames held on the staging queue; delivering
* them is too much trouble right now.
*/
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, dest,
"%s", "fix proxy entry");
IEEE80211_ADDR_COPY(rt->rt_nexthop, vap->iv_myaddr);
rt->rt_flags |= IEEE80211_MESHRT_FLAGS_VALID
| IEEE80211_MESHRT_FLAGS_PROXY;
/* XXX belongs in hwmp */
ieee80211_ageq_drain_node(&ic->ic_stageq,
(void *)(uintptr_t) ieee80211_mac_hash(ic, dest));
/* XXX stat? */
}
MESH_RT_UNLOCK(ms);
}
static __inline void
mesh_rt_del(struct ieee80211_mesh_state *ms, struct ieee80211_mesh_route *rt)
{
TAILQ_REMOVE(&ms->ms_routes, rt, rt_next);
/*
* Grab the lock before destroying it, to be sure no one else
* is holding the route.
*/
RT_ENTRY_LOCK(rt);
callout_drain(&rt->rt_discovery);
mtx_destroy(&rt->rt_lock);
free(rt, M_80211_MESH_RT);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
void
ieee80211_mesh_rt_del(struct ieee80211vap *vap,
const uint8_t dest[IEEE80211_ADDR_LEN])
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt, *next;
MESH_RT_LOCK(ms);
TAILQ_FOREACH_SAFE(rt, &ms->ms_routes, rt_next, next) {
if (IEEE80211_ADDR_EQ(rt->rt_dest, dest)) {
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY) {
ms->ms_ppath->mpp_senderror(vap, dest, rt,
IEEE80211_REASON_MESH_PERR_NO_PROXY);
} else {
ms->ms_ppath->mpp_senderror(vap, dest, rt,
IEEE80211_REASON_MESH_PERR_DEST_UNREACH);
}
mesh_rt_del(ms, rt);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
MESH_RT_UNLOCK(ms);
return;
}
}
MESH_RT_UNLOCK(ms);
}
void
ieee80211_mesh_rt_flush(struct ieee80211vap *vap)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt, *next;
if (ms == NULL)
return;
MESH_RT_LOCK(ms);
TAILQ_FOREACH_SAFE(rt, &ms->ms_routes, rt_next, next)
mesh_rt_del(ms, rt);
MESH_RT_UNLOCK(ms);
}
void
ieee80211_mesh_rt_flush_peer(struct ieee80211vap *vap,
const uint8_t peer[IEEE80211_ADDR_LEN])
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt, *next;
MESH_RT_LOCK(ms);
TAILQ_FOREACH_SAFE(rt, &ms->ms_routes, rt_next, next) {
if (IEEE80211_ADDR_EQ(rt->rt_nexthop, peer))
mesh_rt_del(ms, rt);
}
MESH_RT_UNLOCK(ms);
}
/*
* Flush expired routing entries, i.e. those in invalid state for
* some time.
*/
static void
mesh_rt_flush_invalid(struct ieee80211vap *vap)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt, *next;
if (ms == NULL)
return;
MESH_RT_LOCK(ms);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
TAILQ_FOREACH_SAFE(rt, &ms->ms_routes, rt_next, next) {
/* Discover paths will be deleted by their own callout */
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_DISCOVER)
continue;
ieee80211_mesh_rt_update(rt, 0);
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0)
mesh_rt_del(ms, rt);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
MESH_RT_UNLOCK(ms);
}
#define N(a) (sizeof(a) / sizeof(a[0]))
int
ieee80211_mesh_register_proto_path(const struct ieee80211_mesh_proto_path *mpp)
{
int i, firstempty = -1;
for (i = 0; i < N(mesh_proto_paths); i++) {
if (strncmp(mpp->mpp_descr, mesh_proto_paths[i].mpp_descr,
IEEE80211_MESH_PROTO_DSZ) == 0)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return EEXIST;
if (!mesh_proto_paths[i].mpp_active && firstempty == -1)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
firstempty = i;
}
if (firstempty < 0)
return ENOSPC;
memcpy(&mesh_proto_paths[firstempty], mpp, sizeof(*mpp));
mesh_proto_paths[firstempty].mpp_active = 1;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 0;
}
int
ieee80211_mesh_register_proto_metric(const struct
ieee80211_mesh_proto_metric *mpm)
{
int i, firstempty = -1;
for (i = 0; i < N(mesh_proto_metrics); i++) {
if (strncmp(mpm->mpm_descr, mesh_proto_metrics[i].mpm_descr,
IEEE80211_MESH_PROTO_DSZ) == 0)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return EEXIST;
if (!mesh_proto_metrics[i].mpm_active && firstempty == -1)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
firstempty = i;
}
if (firstempty < 0)
return ENOSPC;
memcpy(&mesh_proto_metrics[firstempty], mpm, sizeof(*mpm));
mesh_proto_metrics[firstempty].mpm_active = 1;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 0;
}
static int
mesh_select_proto_path(struct ieee80211vap *vap, const char *name)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
int i;
for (i = 0; i < N(mesh_proto_paths); i++) {
if (strcasecmp(mesh_proto_paths[i].mpp_descr, name) == 0) {
ms->ms_ppath = &mesh_proto_paths[i];
return 0;
}
}
return ENOENT;
}
static int
mesh_select_proto_metric(struct ieee80211vap *vap, const char *name)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
int i;
for (i = 0; i < N(mesh_proto_metrics); i++) {
if (strcasecmp(mesh_proto_metrics[i].mpm_descr, name) == 0) {
ms->ms_pmetric = &mesh_proto_metrics[i];
return 0;
}
}
return ENOENT;
}
#undef N
static void
mesh_gatemode_setup(struct ieee80211vap *vap)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
/*
* NB: When a mesh gate is running as a ROOT it shall
* not send out periodic GANNs but instead mark the
* mesh gate flag for the corresponding proactive PREQ
* and RANN frames.
*/
if (ms->ms_flags & IEEE80211_MESHFLAGS_ROOT ||
(ms->ms_flags & IEEE80211_MESHFLAGS_GATE) == 0) {
callout_drain(&ms->ms_gatetimer);
return ;
}
callout_reset(&ms->ms_gatetimer, ieee80211_mesh_gateint,
mesh_gatemode_cb, vap);
}
static void
mesh_gatemode_cb(void *arg)
{
struct ieee80211vap *vap = (struct ieee80211vap *)arg;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_meshgann_ie gann;
gann.gann_flags = 0; /* Reserved */
gann.gann_hopcount = 0;
gann.gann_ttl = ms->ms_ttl;
IEEE80211_ADDR_COPY(gann.gann_addr, vap->iv_myaddr);
gann.gann_seq = ms->ms_gateseq++;
gann.gann_interval = ieee80211_mesh_gateint;
IEEE80211_NOTE(vap, IEEE80211_MSG_MESH, vap->iv_bss,
"send broadcast GANN (seq %u)", gann.gann_seq);
ieee80211_send_action(vap->iv_bss, IEEE80211_ACTION_CAT_MESH,
IEEE80211_ACTION_MESH_GANN, &gann);
mesh_gatemode_setup(vap);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static void
ieee80211_mesh_init(void)
{
memset(mesh_proto_paths, 0, sizeof(mesh_proto_paths));
memset(mesh_proto_metrics, 0, sizeof(mesh_proto_metrics));
/*
* Setup mesh parameters that depends on the clock frequency.
*/
ieee80211_mesh_gateint = msecs_to_ticks(10000);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_mesh_retrytimeout = msecs_to_ticks(40);
ieee80211_mesh_holdingtimeout = msecs_to_ticks(40);
ieee80211_mesh_confirmtimeout = msecs_to_ticks(40);
ieee80211_mesh_backofftimeout = msecs_to_ticks(5000);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/*
* Register action frame handlers.
*/
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_OPEN,
mesh_recv_action_meshpeering_open);
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CONFIRM,
mesh_recv_action_meshpeering_confirm);
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
mesh_recv_action_meshpeering_close);
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_MESH,
IEEE80211_ACTION_MESH_LMETRIC, mesh_recv_action_meshlmetric);
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_MESH,
IEEE80211_ACTION_MESH_GANN, mesh_recv_action_meshgate);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_send_action_register(IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_OPEN,
mesh_send_action_meshpeering_open);
ieee80211_send_action_register(IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CONFIRM,
mesh_send_action_meshpeering_confirm);
ieee80211_send_action_register(IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
mesh_send_action_meshpeering_close);
ieee80211_send_action_register(IEEE80211_ACTION_CAT_MESH,
IEEE80211_ACTION_MESH_LMETRIC,
mesh_send_action_meshlmetric);
ieee80211_send_action_register(IEEE80211_ACTION_CAT_MESH,
IEEE80211_ACTION_MESH_GANN,
mesh_send_action_meshgate);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/*
* Register Airtime Link Metric.
*/
ieee80211_mesh_register_proto_metric(&mesh_metric_airtime);
}
SYSINIT(wlan_mesh, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_mesh_init, NULL);
void
ieee80211_mesh_attach(struct ieee80211com *ic)
{
ic->ic_vattach[IEEE80211_M_MBSS] = mesh_vattach;
}
void
ieee80211_mesh_detach(struct ieee80211com *ic)
{
}
static void
mesh_vdetach_peers(void *arg, struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
uint16_t args[3];
if (ni->ni_mlstate == IEEE80211_NODE_MESH_ESTABLISHED) {
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
}
callout_drain(&ni->ni_mltimer);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/* XXX belongs in hwmp */
ieee80211_ageq_drain_node(&ic->ic_stageq,
(void *)(uintptr_t) ieee80211_mac_hash(ic, ni->ni_macaddr));
}
static void
mesh_vdetach(struct ieee80211vap *vap)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
callout_drain(&ms->ms_cleantimer);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_iterate_nodes(&vap->iv_ic->ic_sta, mesh_vdetach_peers,
NULL);
ieee80211_mesh_rt_flush(vap);
mtx_destroy(&ms->ms_rt_lock);
ms->ms_ppath->mpp_vdetach(vap);
free(vap->iv_mesh, M_80211_VAP);
vap->iv_mesh = NULL;
}
static void
mesh_vattach(struct ieee80211vap *vap)
{
struct ieee80211_mesh_state *ms;
vap->iv_newstate = mesh_newstate;
vap->iv_input = mesh_input;
vap->iv_opdetach = mesh_vdetach;
vap->iv_recv_mgmt = mesh_recv_mgmt;
vap->iv_recv_ctl = mesh_recv_ctl;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ms = malloc(sizeof(struct ieee80211_mesh_state), M_80211_VAP,
M_NOWAIT | M_ZERO);
if (ms == NULL) {
printf("%s: couldn't alloc MBSS state\n", __func__);
return;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
vap->iv_mesh = ms;
ms->ms_seq = 0;
ms->ms_flags = (IEEE80211_MESHFLAGS_AP | IEEE80211_MESHFLAGS_FWD);
ms->ms_ttl = IEEE80211_MESH_DEFAULT_TTL;
TAILQ_INIT(&ms->ms_known_gates);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
TAILQ_INIT(&ms->ms_routes);
mtx_init(&ms->ms_rt_lock, "MBSS", "802.11s routing table", MTX_DEF);
callout_init(&ms->ms_cleantimer, CALLOUT_MPSAFE);
callout_init(&ms->ms_gatetimer, CALLOUT_MPSAFE);
ms->ms_gateseq = 0;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
mesh_select_proto_metric(vap, "AIRTIME");
KASSERT(ms->ms_pmetric, ("ms_pmetric == NULL"));
mesh_select_proto_path(vap, "HWMP");
KASSERT(ms->ms_ppath, ("ms_ppath == NULL"));
ms->ms_ppath->mpp_vattach(vap);
}
/*
* IEEE80211_M_MBSS vap state machine handler.
*/
static int
mesh_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
enum ieee80211_state ostate;
IEEE80211_LOCK_ASSERT(ic);
ostate = vap->iv_state;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
__func__, ieee80211_state_name[ostate],
ieee80211_state_name[nstate], arg);
vap->iv_state = nstate; /* state transition */
if (ostate != IEEE80211_S_SCAN)
ieee80211_cancel_scan(vap); /* background scan */
ni = vap->iv_bss; /* NB: no reference held */
if (nstate != IEEE80211_S_RUN && ostate == IEEE80211_S_RUN) {
callout_drain(&ms->ms_cleantimer);
callout_drain(&ms->ms_gatetimer);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
switch (nstate) {
case IEEE80211_S_INIT:
switch (ostate) {
case IEEE80211_S_SCAN:
ieee80211_cancel_scan(vap);
break;
case IEEE80211_S_CAC:
ieee80211_dfs_cac_stop(vap);
break;
case IEEE80211_S_RUN:
ieee80211_iterate_nodes(&ic->ic_sta,
mesh_vdetach_peers, NULL);
break;
default:
break;
}
if (ostate != IEEE80211_S_INIT) {
/* NB: optimize INIT -> INIT case */
ieee80211_reset_bss(vap);
ieee80211_mesh_rt_flush(vap);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
break;
case IEEE80211_S_SCAN:
switch (ostate) {
case IEEE80211_S_INIT:
if (vap->iv_des_chan != IEEE80211_CHAN_ANYC &&
!IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan) &&
ms->ms_idlen != 0) {
/*
* Already have a channel and a mesh ID; bypass
* the scan and startup immediately.
*/
ieee80211_create_ibss(vap, vap->iv_des_chan);
break;
}
/*
* Initiate a scan. We can come here as a result
* of an IEEE80211_IOC_SCAN_REQ too in which case
* the vap will be marked with IEEE80211_FEXT_SCANREQ
* and the scan request parameters will be present
* in iv_scanreq. Otherwise we do the default.
*/
if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) {
ieee80211_check_scan(vap,
vap->iv_scanreq_flags,
vap->iv_scanreq_duration,
vap->iv_scanreq_mindwell,
vap->iv_scanreq_maxdwell,
vap->iv_scanreq_nssid, vap->iv_scanreq_ssid);
vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ;
} else
ieee80211_check_scan_current(vap);
break;
default:
break;
}
break;
case IEEE80211_S_CAC:
/*
* Start CAC on a DFS channel. We come here when starting
* a bss on a DFS channel (see ieee80211_create_ibss).
*/
ieee80211_dfs_cac_start(vap);
break;
case IEEE80211_S_RUN:
switch (ostate) {
case IEEE80211_S_INIT:
/*
* Already have a channel; bypass the
* scan and startup immediately.
* Note that ieee80211_create_ibss will call
* back to do a RUN->RUN state change.
*/
ieee80211_create_ibss(vap,
ieee80211_ht_adjust_channel(ic,
ic->ic_curchan, vap->iv_flags_ht));
/* NB: iv_bss is changed on return */
break;
case IEEE80211_S_CAC:
/*
* NB: This is the normal state change when CAC
* expires and no radar was detected; no need to
* clear the CAC timer as it's already expired.
*/
/* fall thru... */
case IEEE80211_S_CSA:
#if 0
/*
* Shorten inactivity timer of associated stations
* to weed out sta's that don't follow a CSA.
*/
ieee80211_iterate_nodes(&ic->ic_sta, sta_csa, vap);
#endif
/*
* Update bss node channel to reflect where
* we landed after CSA.
*/
ieee80211_node_set_chan(vap->iv_bss,
ieee80211_ht_adjust_channel(ic, ic->ic_curchan,
ieee80211_htchanflags(vap->iv_bss->ni_chan)));
/* XXX bypass debug msgs */
break;
case IEEE80211_S_SCAN:
case IEEE80211_S_RUN:
#ifdef IEEE80211_DEBUG
if (ieee80211_msg_debug(vap)) {
struct ieee80211_node *ni = vap->iv_bss;
ieee80211_note(vap,
"synchronized with %s meshid ",
ether_sprintf(ni->ni_meshid));
ieee80211_print_essid(ni->ni_meshid,
ni->ni_meshidlen);
/* XXX MCS/HT */
printf(" channel %d\n",
ieee80211_chan2ieee(ic, ic->ic_curchan));
}
#endif
break;
default:
break;
}
ieee80211_node_authorize(vap->iv_bss);
callout_reset(&ms->ms_cleantimer, ms->ms_ppath->mpp_inact,
mesh_rt_cleanup_cb, vap);
mesh_gatemode_setup(vap);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
default:
break;
}
/* NB: ostate not nstate */
ms->ms_ppath->mpp_newstate(vap, ostate, arg);
return 0;
}
static void
mesh_rt_cleanup_cb(void *arg)
{
struct ieee80211vap *vap = arg;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
mesh_rt_flush_invalid(vap);
callout_reset(&ms->ms_cleantimer, ms->ms_ppath->mpp_inact,
mesh_rt_cleanup_cb, vap);
}
/*
* Mark a mesh STA as gate and return a pointer to it.
* If this is first time, we create a new gate route.
* Always update the path route to this mesh gate.
*/
struct ieee80211_mesh_gate_route *
ieee80211_mesh_mark_gate(struct ieee80211vap *vap, const uint8_t *addr,
struct ieee80211_mesh_route *rt)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_gate_route *gr = NULL, *next;
int found = 0;
MESH_RT_LOCK(ms);
TAILQ_FOREACH_SAFE(gr, &ms->ms_known_gates, gr_next, next) {
if (IEEE80211_ADDR_EQ(gr->gr_addr, addr)) {
found = 1;
break;
}
}
if (!found) {
/* New mesh gate add it to known table. */
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, addr,
"%s", "stored new gate information from pro-PREQ.");
gr = malloc(ALIGN(sizeof(struct ieee80211_mesh_gate_route)),
M_80211_MESH_GT_RT, M_NOWAIT | M_ZERO);
IEEE80211_ADDR_COPY(gr->gr_addr, addr);
TAILQ_INSERT_TAIL(&ms->ms_known_gates, gr, gr_next);
}
gr->gr_route = rt;
/* TODO: link from path route to gate route */
MESH_RT_UNLOCK(ms);
return gr;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/*
* Helper function to note the Mesh Peer Link FSM change.
*/
static void
mesh_linkchange(struct ieee80211_node *ni, enum ieee80211_mesh_mlstate state)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
#ifdef IEEE80211_DEBUG
static const char *meshlinkstates[] = {
[IEEE80211_NODE_MESH_IDLE] = "IDLE",
[IEEE80211_NODE_MESH_OPENSNT] = "OPEN SENT",
[IEEE80211_NODE_MESH_OPENRCV] = "OPEN RECEIVED",
[IEEE80211_NODE_MESH_CONFIRMRCV] = "CONFIRM RECEIVED",
[IEEE80211_NODE_MESH_ESTABLISHED] = "ESTABLISHED",
[IEEE80211_NODE_MESH_HOLDING] = "HOLDING"
};
#endif
IEEE80211_NOTE(vap, IEEE80211_MSG_MESH,
ni, "peer link: %s -> %s",
meshlinkstates[ni->ni_mlstate], meshlinkstates[state]);
/* track neighbor count */
if (state == IEEE80211_NODE_MESH_ESTABLISHED &&
ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED) {
KASSERT(ms->ms_neighbors < 65535, ("neighbor count overflow"));
ms->ms_neighbors++;
ieee80211_beacon_notify(vap, IEEE80211_BEACON_MESHCONF);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
} else if (ni->ni_mlstate == IEEE80211_NODE_MESH_ESTABLISHED &&
state != IEEE80211_NODE_MESH_ESTABLISHED) {
KASSERT(ms->ms_neighbors > 0, ("neighbor count 0"));
ms->ms_neighbors--;
ieee80211_beacon_notify(vap, IEEE80211_BEACON_MESHCONF);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
ni->ni_mlstate = state;
switch (state) {
case IEEE80211_NODE_MESH_HOLDING:
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ms->ms_ppath->mpp_peerdown(ni);
break;
case IEEE80211_NODE_MESH_ESTABLISHED:
ieee80211_mesh_discover(vap, ni->ni_macaddr, NULL);
break;
default:
break;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
/*
* Helper function to generate a unique local ID required for mesh
* peer establishment.
*/
static void
mesh_checkid(void *arg, struct ieee80211_node *ni)
{
uint16_t *r = arg;
if (*r == ni->ni_mllid)
*(uint16_t *)arg = 0;
}
static uint32_t
mesh_generateid(struct ieee80211vap *vap)
{
int maxiter = 4;
uint16_t r;
do {
get_random_bytes(&r, 2);
ieee80211_iterate_nodes(&vap->iv_ic->ic_sta, mesh_checkid, &r);
maxiter--;
} while (r == 0 && maxiter > 0);
return r;
}
/*
* Verifies if we already received this packet by checking its
* sequence number.
* Returns 0 if the frame is to be accepted, 1 otherwise.
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
*/
static int
mesh_checkpseq(struct ieee80211vap *vap,
const uint8_t source[IEEE80211_ADDR_LEN], uint32_t seq)
{
struct ieee80211_mesh_route *rt;
rt = ieee80211_mesh_rt_find(vap, source);
if (rt == NULL) {
rt = ieee80211_mesh_rt_add(vap, source);
if (rt == NULL) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, source,
"%s", "add mcast route failed");
vap->iv_stats.is_mesh_rtaddfailed++;
return 1;
}
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, source,
"add mcast route, mesh seqno %d", seq);
rt->rt_lastmseq = seq;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 0;
}
if (IEEE80211_MESH_SEQ_GEQ(rt->rt_lastmseq, seq)) {
return 1;
} else {
rt->rt_lastmseq = seq;
return 0;
}
}
/*
* Iterate the routing table and locate the next hop.
*/
struct ieee80211_node *
ieee80211_mesh_find_txnode(struct ieee80211vap *vap,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
const uint8_t dest[IEEE80211_ADDR_LEN])
{
struct ieee80211_mesh_route *rt;
rt = ieee80211_mesh_rt_find(vap, dest);
if (rt == NULL)
return NULL;
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, dest,
"%s: !valid, flags 0x%x", __func__, rt->rt_flags);
/* XXX stat */
return NULL;
}
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY) {
rt = ieee80211_mesh_rt_find(vap, rt->rt_mesh_gate);
if (rt == NULL) return NULL;
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, dest,
"%s: meshgate !valid, flags 0x%x", __func__,
rt->rt_flags);
/* XXX stat */
return NULL;
}
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return ieee80211_find_txnode(vap, rt->rt_nexthop);
}
static void
mesh_transmit_to_gate(struct ieee80211vap *vap, struct mbuf *m,
struct ieee80211_mesh_route *rt_gate)
{
struct ifnet *ifp = vap->iv_ifp;
struct ieee80211_node *ni;
IEEE80211_TX_UNLOCK_ASSERT(vap->iv_ic);
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
ni = ieee80211_mesh_find_txnode(vap, rt_gate->rt_dest);
if (ni == NULL) {
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
m_freem(m);
return;
}
/*
* Send through the VAP packet transmit path.
* This consumes the node ref grabbed above and
* the mbuf, regardless of whether there's a problem
* or not.
*/
(void) ieee80211_vap_pkt_send_dest(vap, m, ni);
}
/*
* Forward the queued frames to known valid mesh gates.
* Assume destination to be outside the MBSS (i.e. proxy entry),
* If no valid mesh gates are known silently discard queued frames.
* After transmitting frames to all known valid mesh gates, this route
* will be marked invalid, and a new path discovery will happen in the hopes
* that (at least) one of the mesh gates have a new proxy entry for us to use.
*/
void
ieee80211_mesh_forward_to_gates(struct ieee80211vap *vap,
struct ieee80211_mesh_route *rt_dest)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt_gate;
struct ieee80211_mesh_gate_route *gr = NULL, *gr_next;
struct mbuf *m, *mcopy, *next;
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
IEEE80211_TX_UNLOCK_ASSERT(ic);
KASSERT( rt_dest->rt_flags == IEEE80211_MESHRT_FLAGS_DISCOVER,
("Route is not marked with IEEE80211_MESHRT_FLAGS_DISCOVER"));
/* XXX: send to more than one valid mash gate */
MESH_RT_LOCK(ms);
m = ieee80211_ageq_remove(&ic->ic_stageq,
(struct ieee80211_node *)(uintptr_t)
ieee80211_mac_hash(ic, rt_dest->rt_dest));
TAILQ_FOREACH_SAFE(gr, &ms->ms_known_gates, gr_next, gr_next) {
rt_gate = gr->gr_route;
if (rt_gate == NULL) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_HWMP,
rt_dest->rt_dest,
"mesh gate with no path %6D",
gr->gr_addr, ":");
continue;
}
if ((rt_gate->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0)
continue;
KASSERT(rt_gate->rt_flags & IEEE80211_MESHRT_FLAGS_GATE,
("route not marked as a mesh gate"));
KASSERT((rt_gate->rt_flags &
IEEE80211_MESHRT_FLAGS_PROXY) == 0,
("found mesh gate that is also marked porxy"));
/*
* convert route to a proxy route gated by the current
* mesh gate, this is needed so encap can built data
* frame with correct address.
*/
rt_dest->rt_flags = IEEE80211_MESHRT_FLAGS_PROXY |
IEEE80211_MESHRT_FLAGS_VALID;
rt_dest->rt_ext_seq = 1; /* random value */
IEEE80211_ADDR_COPY(rt_dest->rt_mesh_gate, rt_gate->rt_dest);
IEEE80211_ADDR_COPY(rt_dest->rt_nexthop, rt_gate->rt_nexthop);
rt_dest->rt_metric = rt_gate->rt_metric;
rt_dest->rt_nhops = rt_gate->rt_nhops;
ieee80211_mesh_rt_update(rt_dest, ms->ms_ppath->mpp_inact);
MESH_RT_UNLOCK(ms);
/* XXX: lock?? */
mcopy = m_dup(m, M_NOWAIT);
for (; mcopy != NULL; mcopy = next) {
next = mcopy->m_nextpkt;
mcopy->m_nextpkt = NULL;
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_HWMP,
rt_dest->rt_dest,
"flush queued frame %p len %d", mcopy,
mcopy->m_pkthdr.len);
mesh_transmit_to_gate(vap, mcopy, rt_gate);
}
MESH_RT_LOCK(ms);
}
rt_dest->rt_flags = 0; /* Mark invalid */
m_freem(m);
MESH_RT_UNLOCK(ms);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/*
* Forward the specified frame.
* Decrement the TTL and set TA to our MAC address.
*/
static void
mesh_forward(struct ieee80211vap *vap, struct mbuf *m,
const struct ieee80211_meshcntl *mc)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ifnet *ifp = vap->iv_ifp;
const struct ieee80211_frame *wh =
mtod(m, const struct ieee80211_frame *);
struct mbuf *mcopy;
struct ieee80211_meshcntl *mccopy;
struct ieee80211_frame *whcopy;
struct ieee80211_node *ni;
int err;
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
/* This is called from the RX path - don't hold this lock */
IEEE80211_TX_UNLOCK_ASSERT(ic);
/*
* mesh ttl of 1 means we are the last one receving it,
* according to amendment we decrement and then check if
* 0, if so we dont forward.
*/
if (mc->mc_ttl < 1) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
"%s", "frame not fwd'd, ttl 1");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
vap->iv_stats.is_mesh_fwd_ttl++;
return;
}
if (!(ms->ms_flags & IEEE80211_MESHFLAGS_FWD)) {
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
"%s", "frame not fwd'd, fwding disabled");
vap->iv_stats.is_mesh_fwd_disabled++;
return;
}
mcopy = m_dup(m, M_NOWAIT);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (mcopy == NULL) {
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
"%s", "frame not fwd'd, cannot dup");
vap->iv_stats.is_mesh_fwd_nobuf++;
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return;
}
mcopy = m_pullup(mcopy, ieee80211_hdrspace(ic, wh) +
sizeof(struct ieee80211_meshcntl));
if (mcopy == NULL) {
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
"%s", "frame not fwd'd, too short");
vap->iv_stats.is_mesh_fwd_tooshort++;
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
m_freem(mcopy);
return;
}
whcopy = mtod(mcopy, struct ieee80211_frame *);
mccopy = (struct ieee80211_meshcntl *)
(mtod(mcopy, uint8_t *) + ieee80211_hdrspace(ic, wh));
/* XXX clear other bits? */
whcopy->i_fc[1] &= ~IEEE80211_FC1_RETRY;
IEEE80211_ADDR_COPY(whcopy->i_addr2, vap->iv_myaddr);
if (IEEE80211_IS_MULTICAST(wh->i_addr1)) {
ni = ieee80211_ref_node(vap->iv_bss);
mcopy->m_flags |= M_MCAST;
} else {
ni = ieee80211_mesh_find_txnode(vap, whcopy->i_addr3);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (ni == NULL) {
/*
* [Optional] any of the following three actions:
* o silently discard
* o trigger a path discovery
* o inform TA that meshDA is unknown.
*/
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
"%s", "frame not fwd'd, no path");
ms->ms_ppath->mpp_senderror(vap, whcopy->i_addr3, NULL,
IEEE80211_REASON_MESH_PERR_NO_FI);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
vap->iv_stats.is_mesh_fwd_nopath++;
m_freem(mcopy);
return;
}
IEEE80211_ADDR_COPY(whcopy->i_addr1, ni->ni_macaddr);
}
KASSERT(mccopy->mc_ttl > 0, ("%s called with wrong ttl", __func__));
mccopy->mc_ttl--;
/* XXX calculate priority so drivers can find the tx queue */
M_WME_SETAC(mcopy, WME_AC_BE);
/* XXX do we know m_nextpkt is NULL? */
mcopy->m_pkthdr.rcvif = (void *) ni;
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
/*
* XXX this bypasses all of the VAP TX handling; it passes frames
* directly to the parent interface.
*
* Because of this, there's no TX lock being held as there's no
* encaps state being used.
*
* Doing a direct parent transmit may not be the correct thing
* to do here; we'll have to re-think this soon.
*/
IEEE80211_TX_LOCK(ic);
err = ieee80211_parent_xmitpkt(ic, mcopy);
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
IEEE80211_TX_UNLOCK(ic);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (err != 0) {
/* NB: IFQ_HANDOFF reclaims mbuf */
ieee80211_free_node(ni);
} else {
if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
}
static struct mbuf *
mesh_decap(struct ieee80211vap *vap, struct mbuf *m, int hdrlen, int meshdrlen)
{
#define WHDIR(wh) ((wh)->i_fc[1] & IEEE80211_FC1_DIR_MASK)
#define MC01(mc) ((const struct ieee80211_meshcntl_ae01 *)mc)
uint8_t b[sizeof(struct ieee80211_qosframe_addr4) +
sizeof(struct ieee80211_meshcntl_ae10)];
const struct ieee80211_qosframe_addr4 *wh;
const struct ieee80211_meshcntl_ae10 *mc;
struct ether_header *eh;
struct llc *llc;
int ae;
if (m->m_len < hdrlen + sizeof(*llc) &&
(m = m_pullup(m, hdrlen + sizeof(*llc))) == NULL) {
IEEE80211_DPRINTF(vap, IEEE80211_MSG_ANY,
"discard data frame: %s", "m_pullup failed");
vap->iv_stats.is_rx_tooshort++;
return NULL;
}
memcpy(b, mtod(m, caddr_t), hdrlen);
wh = (const struct ieee80211_qosframe_addr4 *)&b[0];
mc = (const struct ieee80211_meshcntl_ae10 *)&b[hdrlen - meshdrlen];
KASSERT(WHDIR(wh) == IEEE80211_FC1_DIR_FROMDS ||
WHDIR(wh) == IEEE80211_FC1_DIR_DSTODS,
("bogus dir, fc 0x%x:0x%x", wh->i_fc[0], wh->i_fc[1]));
llc = (struct llc *)(mtod(m, caddr_t) + hdrlen);
if (llc->llc_dsap == LLC_SNAP_LSAP && llc->llc_ssap == LLC_SNAP_LSAP &&
llc->llc_control == LLC_UI && llc->llc_snap.org_code[0] == 0 &&
llc->llc_snap.org_code[1] == 0 && llc->llc_snap.org_code[2] == 0 &&
/* NB: preserve AppleTalk frames that have a native SNAP hdr */
!(llc->llc_snap.ether_type == htons(ETHERTYPE_AARP) ||
llc->llc_snap.ether_type == htons(ETHERTYPE_IPX))) {
m_adj(m, hdrlen + sizeof(struct llc) - sizeof(*eh));
llc = NULL;
} else {
m_adj(m, hdrlen - sizeof(*eh));
}
eh = mtod(m, struct ether_header *);
ae = mc->mc_flags & IEEE80211_MESH_AE_MASK;
if (WHDIR(wh) == IEEE80211_FC1_DIR_FROMDS) {
IEEE80211_ADDR_COPY(eh->ether_dhost, wh->i_addr1);
if (ae == IEEE80211_MESH_AE_00) {
IEEE80211_ADDR_COPY(eh->ether_shost, wh->i_addr3);
} else if (ae == IEEE80211_MESH_AE_01) {
IEEE80211_ADDR_COPY(eh->ether_shost,
MC01(mc)->mc_addr4);
} else {
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
(const struct ieee80211_frame *)wh, NULL,
"bad AE %d", ae);
vap->iv_stats.is_mesh_badae++;
m_freem(m);
return NULL;
}
} else {
if (ae == IEEE80211_MESH_AE_00) {
IEEE80211_ADDR_COPY(eh->ether_dhost, wh->i_addr3);
IEEE80211_ADDR_COPY(eh->ether_shost, wh->i_addr4);
} else if (ae == IEEE80211_MESH_AE_10) {
IEEE80211_ADDR_COPY(eh->ether_dhost, mc->mc_addr5);
IEEE80211_ADDR_COPY(eh->ether_shost, mc->mc_addr6);
} else {
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
(const struct ieee80211_frame *)wh, NULL,
"bad AE %d", ae);
vap->iv_stats.is_mesh_badae++;
m_freem(m);
return NULL;
}
}
#ifndef __NO_STRICT_ALIGNMENT
if (!ALIGNED_POINTER(mtod(m, caddr_t) + sizeof(*eh), uint32_t)) {
m = ieee80211_realign(vap, m, sizeof(*eh));
if (m == NULL)
return NULL;
}
#endif /* !__NO_STRICT_ALIGNMENT */
if (llc != NULL) {
eh = mtod(m, struct ether_header *);
eh->ether_type = htons(m->m_pkthdr.len - sizeof(*eh));
}
return m;
#undef WDIR
#undef MC01
}
/*
* Return non-zero if the unicast mesh data frame should be processed
* locally. Frames that are not proxy'd have our address, otherwise
* we need to consult the routing table to look for a proxy entry.
*/
static __inline int
mesh_isucastforme(struct ieee80211vap *vap, const struct ieee80211_frame *wh,
const struct ieee80211_meshcntl *mc)
{
int ae = mc->mc_flags & 3;
KASSERT((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS,
("bad dir 0x%x:0x%x", wh->i_fc[0], wh->i_fc[1]));
KASSERT(ae == IEEE80211_MESH_AE_00 || ae == IEEE80211_MESH_AE_10,
("bad AE %d", ae));
if (ae == IEEE80211_MESH_AE_10) { /* ucast w/ proxy */
const struct ieee80211_meshcntl_ae10 *mc10 =
(const struct ieee80211_meshcntl_ae10 *) mc;
struct ieee80211_mesh_route *rt =
ieee80211_mesh_rt_find(vap, mc10->mc_addr5);
/* check for proxy route to ourself */
return (rt != NULL &&
(rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY));
} else /* ucast w/o proxy */
return IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_myaddr);
}
/*
* Verifies transmitter, updates lifetime, precursor list and forwards data.
* > 0 means we have forwarded data and no need to process locally
* == 0 means we want to process locally (and we may have forwarded data
* < 0 means there was an error and data should be discarded
*/
static int
mesh_recv_indiv_data_to_fwrd(struct ieee80211vap *vap, struct mbuf *m,
struct ieee80211_frame *wh, const struct ieee80211_meshcntl *mc)
{
struct ieee80211_qosframe_addr4 *qwh;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt_meshda, *rt_meshsa;
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
/* This is called from the RX path - don't hold this lock */
2013-03-09 05:20:33 +00:00
IEEE80211_TX_UNLOCK_ASSERT(vap->iv_ic);
qwh = (struct ieee80211_qosframe_addr4 *)wh;
/*
* TODO:
* o verify addr2 is a legitimate transmitter
* o lifetime of precursor of addr3 (addr2) is max(init, curr)
* o lifetime of precursor of addr4 (nexthop) is max(init, curr)
*/
/* set lifetime of addr3 (meshDA) to initial value */
rt_meshda = ieee80211_mesh_rt_find(vap, qwh->i_addr3);
if (rt_meshda == NULL) {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, qwh->i_addr2,
"no route to meshDA(%6D)", qwh->i_addr3, ":");
/*
* [Optional] any of the following three actions:
* o silently discard [X]
* o trigger a path discovery [ ]
* o inform TA that meshDA is unknown. [ ]
*/
/* XXX: stats */
return (-1);
}
ieee80211_mesh_rt_update(rt_meshda, ticks_to_msecs(
ms->ms_ppath->mpp_inact));
/* set lifetime of addr4 (meshSA) to initial value */
rt_meshsa = ieee80211_mesh_rt_find(vap, qwh->i_addr4);
KASSERT(rt_meshsa != NULL, ("no route"));
ieee80211_mesh_rt_update(rt_meshsa, ticks_to_msecs(
ms->ms_ppath->mpp_inact));
mesh_forward(vap, m, mc);
return (1); /* dont process locally */
}
/*
* Verifies transmitter, updates lifetime, precursor list and process data
* locally, if data is proxy with AE = 10 it could mean data should go
* on another mesh path or data should be forwarded to the DS.
*
* > 0 means we have forwarded data and no need to process locally
* == 0 means we want to process locally (and we may have forwarded data
* < 0 means there was an error and data should be discarded
*/
static int
mesh_recv_indiv_data_to_me(struct ieee80211vap *vap, struct mbuf *m,
struct ieee80211_frame *wh, const struct ieee80211_meshcntl *mc)
{
struct ieee80211_qosframe_addr4 *qwh;
const struct ieee80211_meshcntl_ae10 *mc10;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_route *rt;
int ae;
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
/* This is called from the RX path - don't hold this lock */
2013-03-09 05:20:33 +00:00
IEEE80211_TX_UNLOCK_ASSERT(vap->iv_ic);
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
qwh = (struct ieee80211_qosframe_addr4 *)wh;
mc10 = (const struct ieee80211_meshcntl_ae10 *)mc;
/*
* TODO:
* o verify addr2 is a legitimate transmitter
* o lifetime of precursor entry is max(init, curr)
*/
/* set lifetime of addr4 (meshSA) to initial value */
rt = ieee80211_mesh_rt_find(vap, qwh->i_addr4);
KASSERT(rt != NULL, ("no route"));
ieee80211_mesh_rt_update(rt, ticks_to_msecs(ms->ms_ppath->mpp_inact));
rt = NULL;
ae = mc10->mc_flags & IEEE80211_MESH_AE_MASK;
KASSERT(ae == IEEE80211_MESH_AE_00 ||
ae == IEEE80211_MESH_AE_10, ("bad AE %d", ae));
if (ae == IEEE80211_MESH_AE_10) {
if (IEEE80211_ADDR_EQ(mc10->mc_addr5, qwh->i_addr3)) {
return (0); /* process locally */
}
rt = ieee80211_mesh_rt_find(vap, mc10->mc_addr5);
if (rt != NULL &&
(rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) &&
(rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY) == 0) {
/*
* Forward on another mesh-path, according to
* amendment as specified in 9.32.4.1
*/
IEEE80211_ADDR_COPY(qwh->i_addr3, mc10->mc_addr5);
mesh_forward(vap, m,
(const struct ieee80211_meshcntl *)mc10);
return (1); /* dont process locally */
}
/*
* All other cases: forward of MSDUs from the MBSS to DS indiv.
* addressed according to 13.11.3.2.
*/
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, qwh->i_addr2,
"forward frame to DS, SA(%6D) DA(%6D)",
mc10->mc_addr6, ":", mc10->mc_addr5, ":");
}
return (0); /* process locally */
}
/*
* Try to forward the group addressed data on to other mesh STAs, and
* also to the DS.
*
* > 0 means we have forwarded data and no need to process locally
* == 0 means we want to process locally (and we may have forwarded data
* < 0 means there was an error and data should be discarded
*/
static int
mesh_recv_group_data(struct ieee80211vap *vap, struct mbuf *m,
struct ieee80211_frame *wh, const struct ieee80211_meshcntl *mc)
{
#define MC01(mc) ((const struct ieee80211_meshcntl_ae01 *)mc)
struct ieee80211_mesh_state *ms = vap->iv_mesh;
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
/* This is called from the RX path - don't hold this lock */
2013-03-09 05:20:33 +00:00
IEEE80211_TX_UNLOCK_ASSERT(vap->iv_ic);
mesh_forward(vap, m, mc);
if(mc->mc_ttl > 0) {
if (mc->mc_flags & IEEE80211_MESH_AE_01) {
/*
* Forward of MSDUs from the MBSS to DS group addressed
* (according to 13.11.3.2)
* This happens by delivering the packet, and a bridge
* will sent it on another port member.
*/
if (ms->ms_flags & IEEE80211_MESHFLAGS_GATE &&
ms->ms_flags & IEEE80211_MESHFLAGS_FWD)
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH,
MC01(mc)->mc_addr4, "%s",
"forward from MBSS to the DS");
}
}
return (0); /* process locally */
#undef MC01
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static int
mesh_input(struct ieee80211_node *ni, struct mbuf *m, int rssi, int nf)
{
#define HAS_SEQ(type) ((type & 0x4) == 0)
#define MC01(mc) ((const struct ieee80211_meshcntl_ae01 *)mc)
#define MC10(mc) ((const struct ieee80211_meshcntl_ae10 *)mc)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ifnet *ifp = vap->iv_ifp;
struct ieee80211_frame *wh;
const struct ieee80211_meshcntl *mc;
int hdrspace, meshdrlen, need_tap, error;
uint8_t dir, type, subtype, ae;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
uint32_t seq;
const uint8_t *addr;
uint8_t qos[2];
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_seq rxseq;
KASSERT(ni != NULL, ("null node"));
ni->ni_inact = ni->ni_inact_reload;
need_tap = 1; /* mbuf need to be tapped. */
type = -1; /* undefined */
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
/* This is called from the RX path - don't hold this lock */
IEEE80211_TX_UNLOCK_ASSERT(ic);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL,
"too short (1): len %u", m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
/*
* Bit of a cheat here, we use a pointer for a 3-address
* frame format but don't reference fields past outside
* ieee80211_frame_min w/o first validating the data is
* present.
*/
wh = mtod(m, struct ieee80211_frame *);
if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) !=
IEEE80211_FC0_VERSION_0) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL, "wrong version %x", wh->i_fc[0]);
vap->iv_stats.is_rx_badversion++;
goto err;
}
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) {
IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
ni->ni_noise = nf;
if (HAS_SEQ(type)) {
uint8_t tid = ieee80211_gettid(wh);
if (IEEE80211_QOS_HAS_SEQ(wh) &&
TID_TO_WME_AC(tid) >= WME_AC_VI)
ic->ic_wme.wme_hipri_traffic++;
rxseq = le16toh(*(uint16_t *)wh->i_seq);
if (! ieee80211_check_rxseq(ni, wh)) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/* duplicate, discard */
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
wh->i_addr1, "duplicate",
"seqno <%u,%u> fragno <%u,%u> tid %u",
rxseq >> IEEE80211_SEQ_SEQ_SHIFT,
ni->ni_rxseqs[tid] >>
IEEE80211_SEQ_SEQ_SHIFT,
rxseq & IEEE80211_SEQ_FRAG_MASK,
ni->ni_rxseqs[tid] &
IEEE80211_SEQ_FRAG_MASK,
tid);
vap->iv_stats.is_rx_dup++;
IEEE80211_NODE_STAT(ni, rx_dup);
goto out;
}
ni->ni_rxseqs[tid] = rxseq;
}
}
#ifdef IEEE80211_DEBUG
/*
* It's easier, but too expensive, to simulate different mesh
* topologies by consulting the ACL policy very early, so do this
* only under DEBUG.
*
* NB: this check is also done upon peering link initiation.
*/
if (vap->iv_acl != NULL && !vap->iv_acl->iac_check(vap, wh)) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DISCARD(vap, IEEE80211_MSG_ACL,
wh, NULL, "%s", "disallowed by ACL");
vap->iv_stats.is_rx_acl++;
goto out;
}
#endif
switch (type) {
case IEEE80211_FC0_TYPE_DATA:
if (ni == vap->iv_bss)
goto out;
if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_MESH,
ni->ni_macaddr, NULL,
"peer link not yet established (%d)",
ni->ni_mlstate);
vap->iv_stats.is_mesh_nolink++;
goto out;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (dir != IEEE80211_FC1_DIR_FROMDS &&
dir != IEEE80211_FC1_DIR_DSTODS) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "incorrect dir 0x%x", dir);
vap->iv_stats.is_rx_wrongdir++;
goto err;
}
/* All Mesh data frames are QoS subtype */
if (!HAS_SEQ(type)) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "incorrect subtype 0x%x", subtype);
vap->iv_stats.is_rx_badsubtype++;
goto err;
}
/*
* Next up, any fragmentation.
* XXX: we defrag before we even try to forward,
* Mesh Control field is not present in sub-sequent
* fragmented frames. This is in contrast to Draft 4.0.
*/
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
hdrspace = ieee80211_hdrspace(ic, wh);
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
m = ieee80211_defrag(ni, m, hdrspace);
if (m == NULL) {
/* Fragment dropped or frame not complete yet */
goto out;
}
}
wh = mtod(m, struct ieee80211_frame *); /* NB: after defrag */
/*
* Now we have a complete Mesh Data frame.
*/
/*
* Only fromDStoDS data frames use 4 address qos frames
* as specified in amendment. Otherwise addr4 is located
* in the Mesh Control field and a 3 address qos frame
* is used.
*/
if (IEEE80211_IS_DSTODS(wh))
*(uint16_t *)qos = *(uint16_t *)
((struct ieee80211_qosframe_addr4 *)wh)->i_qos;
else
*(uint16_t *)qos = *(uint16_t *)
((struct ieee80211_qosframe *)wh)->i_qos;
/*
* NB: The mesh STA sets the Mesh Control Present
* subfield to 1 in the Mesh Data frame containing
* an unfragmented MSDU, an A-MSDU, or the first
* fragment of an MSDU.
* After defrag it should always be present.
*/
if (!(qos[1] & IEEE80211_QOS_MC)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_MESH,
ni->ni_macaddr, NULL,
"%s", "Mesh control field not present");
vap->iv_stats.is_rx_elem_missing++; /* XXX: kinda */
goto err;
}
/* pull up enough to get to the mesh control */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (m->m_len < hdrspace + sizeof(struct ieee80211_meshcntl) &&
(m = m_pullup(m, hdrspace +
sizeof(struct ieee80211_meshcntl))) == NULL) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL,
"data too short: expecting %u", hdrspace);
vap->iv_stats.is_rx_tooshort++;
goto out; /* XXX */
}
/*
* Now calculate the full extent of the headers. Note
* mesh_decap will pull up anything we didn't get
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
* above when it strips the 802.11 headers.
*/
mc = (const struct ieee80211_meshcntl *)
(mtod(m, const uint8_t *) + hdrspace);
ae = mc->mc_flags & IEEE80211_MESH_AE_MASK;
meshdrlen = sizeof(struct ieee80211_meshcntl) +
ae * IEEE80211_ADDR_LEN;
hdrspace += meshdrlen;
/* pull complete hdrspace = ieee80211_hdrspace + meshcontrol */
if ((meshdrlen > sizeof(struct ieee80211_meshcntl)) &&
(m->m_len < hdrspace) &&
((m = m_pullup(m, hdrspace)) == NULL)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL,
"data too short: expecting %u", hdrspace);
vap->iv_stats.is_rx_tooshort++;
goto out; /* XXX */
}
/* XXX: are we sure there is no reallocating after m_pullup? */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
seq = LE_READ_4(mc->mc_seq);
if (IEEE80211_IS_MULTICAST(wh->i_addr1))
addr = wh->i_addr3;
else if (ae == IEEE80211_MESH_AE_01)
addr = MC01(mc)->mc_addr4;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
else
addr = ((struct ieee80211_qosframe_addr4 *)wh)->i_addr4;
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, addr)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
addr, "data", "%s", "not to me");
vap->iv_stats.is_rx_wrongbss++; /* XXX kinda */
goto out;
}
if (mesh_checkpseq(vap, addr, seq) != 0) {
vap->iv_stats.is_rx_dup++;
goto out;
}
/* This code "routes" the frame to the right control path */
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr3))
error =
mesh_recv_indiv_data_to_me(vap, m, wh, mc);
else if (IEEE80211_IS_MULTICAST(wh->i_addr3))
error = mesh_recv_group_data(vap, m, wh, mc);
else
error = mesh_recv_indiv_data_to_fwrd(vap, m,
wh, mc);
} else
error = mesh_recv_group_data(vap, m, wh, mc);
if (error < 0)
goto err;
else if (error > 0)
goto out;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_rx(vap, m);
need_tap = 0;
/*
* Finally, strip the 802.11 header.
*/
m = mesh_decap(vap, m, hdrspace, meshdrlen);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (m == NULL) {
/* XXX mask bit to check for both */
/* don't count Null data frames as errors */
if (subtype == IEEE80211_FC0_SUBTYPE_NODATA ||
subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL)
goto out;
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
ni->ni_macaddr, "data", "%s", "decap error");
vap->iv_stats.is_rx_decap++;
IEEE80211_NODE_STAT(ni, rx_decap);
goto err;
}
if (qos[0] & IEEE80211_QOS_AMSDU) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
m = ieee80211_decap_amsdu(ni, m);
if (m == NULL)
return IEEE80211_FC0_TYPE_DATA;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_deliver_data(vap, ni, m);
return type;
case IEEE80211_FC0_TYPE_MGT:
vap->iv_stats.is_rx_mgmt++;
IEEE80211_NODE_STAT(ni, rx_mgmt);
if (dir != IEEE80211_FC1_DIR_NODS) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "mgt", "incorrect dir 0x%x", dir);
vap->iv_stats.is_rx_wrongdir++;
goto err;
}
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, "mgt", "too short: len %u",
m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
#ifdef IEEE80211_DEBUG
if ((ieee80211_msg_debug(vap) &&
(vap->iv_ic->ic_flags & IEEE80211_F_SCAN)) ||
ieee80211_msg_dumppkts(vap)) {
if_printf(ifp, "received %s from %s rssi %d\n",
ieee80211_mgt_subtype_name[subtype >>
IEEE80211_FC0_SUBTYPE_SHIFT],
ether_sprintf(wh->i_addr2), rssi);
}
#endif
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "WEP set but not permitted");
vap->iv_stats.is_rx_mgtdiscard++; /* XXX */
goto out;
}
vap->iv_recv_mgmt(ni, m, subtype, rssi, nf);
goto out;
case IEEE80211_FC0_TYPE_CTL:
vap->iv_stats.is_rx_ctl++;
IEEE80211_NODE_STAT(ni, rx_ctrl);
goto out;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "bad", "frame type 0x%x", type);
/* should not come here */
break;
}
err:
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
out:
if (m != NULL) {
if (need_tap && ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_rx(vap, m);
m_freem(m);
}
return type;
#undef HAS_SEQ
#undef MC01
#undef MC10
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
static void
mesh_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0, int subtype,
int rssi, int nf)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_frame *wh;
struct ieee80211_mesh_route *rt;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
uint8_t *frm, *efrm;
wh = mtod(m0, struct ieee80211_frame *);
frm = (uint8_t *)&wh[1];
efrm = mtod(m0, uint8_t *) + m0->m_len;
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
case IEEE80211_FC0_SUBTYPE_BEACON:
{
struct ieee80211_scanparams scan;
/*
* We process beacon/probe response
* frames to discover neighbors.
*/
if (ieee80211_parse_beacon(ni, m0, &scan) != 0)
return;
/*
* Count frame now that we know it's to be processed.
*/
if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) {
vap->iv_stats.is_rx_beacon++; /* XXX remove */
IEEE80211_NODE_STAT(ni, rx_beacons);
} else
IEEE80211_NODE_STAT(ni, rx_proberesp);
/*
* If scanning, just pass information to the scan module.
*/
if (ic->ic_flags & IEEE80211_F_SCAN) {
if (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN) {
/*
* Actively scanning a channel marked passive;
* send a probe request now that we know there
* is 802.11 traffic present.
*
* XXX check if the beacon we recv'd gives
* us what we need and suppress the probe req
*/
ieee80211_probe_curchan(vap, 1);
ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN;
}
ieee80211_add_scan(vap, &scan, wh,
subtype, rssi, nf);
return;
}
/* The rest of this code assumes we are running */
if (vap->iv_state != IEEE80211_S_RUN)
return;
/*
* Ignore non-mesh STAs.
*/
if ((scan.capinfo &
(IEEE80211_CAPINFO_ESS|IEEE80211_CAPINFO_IBSS)) ||
scan.meshid == NULL || scan.meshconf == NULL) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "beacon", "%s", "not a mesh sta");
vap->iv_stats.is_mesh_wrongmesh++;
return;
}
/*
* Ignore STAs for other mesh networks.
*/
if (memcmp(scan.meshid+2, ms->ms_id, ms->ms_idlen) != 0 ||
mesh_verify_meshconf(vap, scan.meshconf)) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "beacon", "%s", "not for our mesh");
vap->iv_stats.is_mesh_wrongmesh++;
return;
}
/*
* Peer only based on the current ACL policy.
*/
if (vap->iv_acl != NULL && !vap->iv_acl->iac_check(vap, wh)) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DISCARD(vap, IEEE80211_MSG_ACL,
wh, NULL, "%s", "disallowed by ACL");
vap->iv_stats.is_rx_acl++;
return;
}
/*
* Do neighbor discovery.
*/
if (!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
/*
* Create a new entry in the neighbor table.
*/
ni = ieee80211_add_neighbor(vap, wh, &scan);
}
/*
* Automatically peer with discovered nodes if possible.
*/
if (ni != vap->iv_bss &&
(ms->ms_flags & IEEE80211_MESHFLAGS_AP)) {
switch (ni->ni_mlstate) {
case IEEE80211_NODE_MESH_IDLE:
{
uint16_t args[1];
/* Wait for backoff callout to reset counter */
if (ni->ni_mlhcnt >= ieee80211_mesh_maxholding)
return;
ni->ni_mlpid = mesh_generateid(vap);
if (ni->ni_mlpid == 0)
return;
mesh_linkchange(ni, IEEE80211_NODE_MESH_OPENSNT);
args[0] = ni->ni_mlpid;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
IEEE80211_ACTION_MESHPEERING_OPEN, args);
ni->ni_mlrcnt = 0;
mesh_peer_timeout_setup(ni);
break;
}
case IEEE80211_NODE_MESH_ESTABLISHED:
{
/*
* Valid beacon from a peer mesh STA
* bump TA lifetime
*/
rt = ieee80211_mesh_rt_find(vap, wh->i_addr2);
if(rt != NULL) {
ieee80211_mesh_rt_update(rt,
ticks_to_msecs(
ms->ms_ppath->mpp_inact));
}
break;
}
default:
break; /* ignore */
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
break;
}
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
{
uint8_t *ssid, *meshid, *rates, *xrates;
uint8_t *sfrm;
if (vap->iv_state != IEEE80211_S_RUN) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "wrong state %s",
ieee80211_state_name[vap->iv_state]);
vap->iv_stats.is_rx_mgtdiscard++;
return;
}
if (IEEE80211_IS_MULTICAST(wh->i_addr2)) {
/* frame must be directed */
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not unicast");
vap->iv_stats.is_rx_mgtdiscard++; /* XXX stat */
return;
}
/*
* prreq frame format
* [tlv] ssid
* [tlv] supported rates
* [tlv] extended supported rates
* [tlv] mesh id
*/
ssid = meshid = rates = xrates = NULL;
sfrm = frm;
while (efrm - frm > 1) {
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return);
switch (*frm) {
case IEEE80211_ELEMID_SSID:
ssid = frm;
break;
case IEEE80211_ELEMID_RATES:
rates = frm;
break;
case IEEE80211_ELEMID_XRATES:
xrates = frm;
break;
case IEEE80211_ELEMID_MESHID:
meshid = frm;
break;
}
frm += frm[1] + 2;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, return);
IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return);
if (xrates != NULL)
IEEE80211_VERIFY_ELEMENT(xrates,
IEEE80211_RATE_MAXSIZE - rates[1], return);
if (meshid != NULL) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_VERIFY_ELEMENT(meshid,
IEEE80211_MESHID_LEN, return);
/* NB: meshid, not ssid */
IEEE80211_VERIFY_SSID(vap->iv_bss, meshid, return);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/* XXX find a better class or define it's own */
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr2,
"%s", "recv probe req");
/*
* Some legacy 11b clients cannot hack a complete
* probe response frame. When the request includes
* only a bare-bones rate set, communicate this to
* the transmit side.
*/
ieee80211_send_proberesp(vap, wh->i_addr2, 0);
break;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
case IEEE80211_FC0_SUBTYPE_ACTION:
case IEEE80211_FC0_SUBTYPE_ACTION_NOACK:
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (ni == vap->iv_bss) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
wh, NULL, "%s", "unknown node");
vap->iv_stats.is_rx_mgtdiscard++;
} else if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) &&
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not for us");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
vap->iv_stats.is_rx_mgtdiscard++;
} else if (vap->iv_state != IEEE80211_S_RUN) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "wrong state %s",
ieee80211_state_name[vap->iv_state]);
vap->iv_stats.is_rx_mgtdiscard++;
} else {
if (ieee80211_parse_action(ni, m0) == 0)
(void)ic->ic_recv_action(ni, wh, frm, efrm);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_ATIM:
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
case IEEE80211_FC0_SUBTYPE_DISASSOC:
case IEEE80211_FC0_SUBTYPE_AUTH:
case IEEE80211_FC0_SUBTYPE_DEAUTH:
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not handled");
vap->iv_stats.is_rx_mgtdiscard++;
break;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "mgt", "subtype 0x%x not handled", subtype);
vap->iv_stats.is_rx_badsubtype++;
break;
}
}
static void
mesh_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype)
{
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_BAR:
ieee80211_recv_bar(ni, m);
break;
}
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/*
* Parse meshpeering action ie's for MPM frames
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
*/
static const struct ieee80211_meshpeer_ie *
mesh_parse_meshpeering_action(struct ieee80211_node *ni,
const struct ieee80211_frame *wh, /* XXX for VERIFY_LENGTH */
const uint8_t *frm, const uint8_t *efrm,
struct ieee80211_meshpeer_ie *mp, uint8_t subtype)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
{
struct ieee80211vap *vap = ni->ni_vap;
const struct ieee80211_meshpeer_ie *mpie;
uint16_t args[3];
const uint8_t *meshid, *meshconf, *meshpeer;
uint8_t sendclose = 0; /* 1 = MPM frame rejected, close will be sent */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
meshid = meshconf = meshpeer = NULL;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
while (efrm - frm > 1) {
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return NULL);
switch (*frm) {
case IEEE80211_ELEMID_MESHID:
meshid = frm;
break;
case IEEE80211_ELEMID_MESHCONF:
meshconf = frm;
break;
case IEEE80211_ELEMID_MESHPEER:
meshpeer = frm;
mpie = (const struct ieee80211_meshpeer_ie *) frm;
memset(mp, 0, sizeof(*mp));
mp->peer_len = mpie->peer_len;
mp->peer_proto = LE_READ_2(&mpie->peer_proto);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
mp->peer_llinkid = LE_READ_2(&mpie->peer_llinkid);
switch (subtype) {
case IEEE80211_ACTION_MESHPEERING_CONFIRM:
mp->peer_linkid =
LE_READ_2(&mpie->peer_linkid);
break;
case IEEE80211_ACTION_MESHPEERING_CLOSE:
/* NB: peer link ID is optional */
if (mpie->peer_len ==
(IEEE80211_MPM_BASE_SZ + 2)) {
mp->peer_linkid = 0;
mp->peer_rcode =
LE_READ_2(&mpie->peer_linkid);
} else {
mp->peer_linkid =
LE_READ_2(&mpie->peer_linkid);
mp->peer_rcode =
LE_READ_2(&mpie->peer_rcode);
}
break;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
break;
}
frm += frm[1] + 2;
}
/*
* Verify the contents of the frame.
* If it fails validation, close the peer link.
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
*/
if (mesh_verify_meshpeer(vap, subtype, (const uint8_t *)mp)) {
sendclose = 1;
IEEE80211_DISCARD(vap,
IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
wh, NULL, "%s", "MPM validation failed");
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/* If meshid is not the same reject any frames type. */
if (sendclose == 0 && mesh_verify_meshid(vap, meshid)) {
sendclose = 1;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DISCARD(vap,
IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
wh, NULL, "%s", "not for our mesh");
if (subtype == IEEE80211_ACTION_MESHPEERING_CLOSE) {
/*
* Standard not clear about this, if we dont ignore
* there will be an endless loop between nodes sending
* CLOSE frames between each other with wrong meshid.
* Discard and timers will bring FSM to IDLE state.
*/
return NULL;
}
}
/*
* Close frames are accepted if meshid is the same.
* Verify the other two types.
*/
if (sendclose == 0 && subtype != IEEE80211_ACTION_MESHPEERING_CLOSE &&
mesh_verify_meshconf(vap, meshconf)) {
sendclose = 1;
IEEE80211_DISCARD(vap,
IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
wh, NULL, "%s", "configuration missmatch");
}
if (sendclose) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
vap->iv_stats.is_rx_mgtdiscard++;
switch (ni->ni_mlstate) {
case IEEE80211_NODE_MESH_IDLE:
case IEEE80211_NODE_MESH_ESTABLISHED:
case IEEE80211_NODE_MESH_HOLDING:
/* ignore */
break;
case IEEE80211_NODE_MESH_OPENSNT:
case IEEE80211_NODE_MESH_OPENRCV:
case IEEE80211_NODE_MESH_CONFIRMRCV:
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
/* Reason codes for rejection */
switch (subtype) {
case IEEE80211_ACTION_MESHPEERING_OPEN:
args[2] = IEEE80211_REASON_MESH_CPVIOLATION;
break;
case IEEE80211_ACTION_MESHPEERING_CONFIRM:
args[2] = IEEE80211_REASON_MESH_INCONS_PARAMS;
break;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
mesh_peer_timeout_setup(ni);
break;
}
return NULL;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return (const struct ieee80211_meshpeer_ie *) mp;
}
static int
mesh_recv_action_meshpeering_open(struct ieee80211_node *ni,
const struct ieee80211_frame *wh,
const uint8_t *frm, const uint8_t *efrm)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
struct ieee80211_meshpeer_ie ie;
const struct ieee80211_meshpeer_ie *meshpeer;
uint16_t args[3];
/* +2+2 for action + code + capabilites */
meshpeer = mesh_parse_meshpeering_action(ni, wh, frm+2+2, efrm, &ie,
IEEE80211_ACTION_MESHPEERING_OPEN);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (meshpeer == NULL) {
return 0;
}
/* XXX move up */
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
"recv PEER OPEN, lid 0x%x", meshpeer->peer_llinkid);
switch (ni->ni_mlstate) {
case IEEE80211_NODE_MESH_IDLE:
/* Reject open request if reached our maximum neighbor count */
if (ms->ms_neighbors >= IEEE80211_MESH_MAX_NEIGHBORS) {
args[0] = meshpeer->peer_llinkid;
args[1] = 0;
args[2] = IEEE80211_REASON_MESH_MAX_PEERS;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
/* stay in IDLE state */
return (0);
}
/* Open frame accepted */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
mesh_linkchange(ni, IEEE80211_NODE_MESH_OPENRCV);
ni->ni_mllid = meshpeer->peer_llinkid;
ni->ni_mlpid = mesh_generateid(vap);
if (ni->ni_mlpid == 0)
return 0; /* XXX */
args[0] = ni->ni_mlpid;
/* Announce we're open too... */
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_OPEN, args);
/* ...and confirm the link. */
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CONFIRM,
args);
mesh_peer_timeout_setup(ni);
break;
case IEEE80211_NODE_MESH_OPENRCV:
/* Wrong Link ID */
if (ni->ni_mllid != meshpeer->peer_llinkid) {
args[0] = ni->ni_mllid;
args[1] = ni->ni_mlpid;
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
mesh_peer_timeout_setup(ni);
break;
}
/* Duplicate open, confirm again. */
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CONFIRM,
args);
break;
case IEEE80211_NODE_MESH_OPENSNT:
ni->ni_mllid = meshpeer->peer_llinkid;
mesh_linkchange(ni, IEEE80211_NODE_MESH_OPENRCV);
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CONFIRM,
args);
/* NB: don't setup/clear any timeout */
break;
case IEEE80211_NODE_MESH_CONFIRMRCV:
if (ni->ni_mlpid != meshpeer->peer_linkid ||
ni->ni_mllid != meshpeer->peer_llinkid) {
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
mesh_linkchange(ni,
IEEE80211_NODE_MESH_HOLDING);
mesh_peer_timeout_setup(ni);
break;
}
mesh_linkchange(ni, IEEE80211_NODE_MESH_ESTABLISHED);
ni->ni_mllid = meshpeer->peer_llinkid;
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CONFIRM,
args);
mesh_peer_timeout_stop(ni);
break;
case IEEE80211_NODE_MESH_ESTABLISHED:
if (ni->ni_mllid != meshpeer->peer_llinkid) {
args[0] = ni->ni_mllid;
args[1] = ni->ni_mlpid;
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
mesh_peer_timeout_setup(ni);
break;
}
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CONFIRM,
args);
break;
case IEEE80211_NODE_MESH_HOLDING:
args[0] = ni->ni_mlpid;
args[1] = meshpeer->peer_llinkid;
/* Standard not clear about what the reaason code should be */
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
break;
}
return 0;
}
static int
mesh_recv_action_meshpeering_confirm(struct ieee80211_node *ni,
const struct ieee80211_frame *wh,
const uint8_t *frm, const uint8_t *efrm)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_meshpeer_ie ie;
const struct ieee80211_meshpeer_ie *meshpeer;
uint16_t args[3];
/* +2+2+2+2 for action + code + capabilites + status code + AID */
meshpeer = mesh_parse_meshpeering_action(ni, wh, frm+2+2+2+2, efrm, &ie,
IEEE80211_ACTION_MESHPEERING_CONFIRM);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (meshpeer == NULL) {
return 0;
}
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
"recv PEER CONFIRM, local id 0x%x, peer id 0x%x",
meshpeer->peer_llinkid, meshpeer->peer_linkid);
switch (ni->ni_mlstate) {
case IEEE80211_NODE_MESH_OPENRCV:
mesh_linkchange(ni, IEEE80211_NODE_MESH_ESTABLISHED);
mesh_peer_timeout_stop(ni);
break;
case IEEE80211_NODE_MESH_OPENSNT:
mesh_linkchange(ni, IEEE80211_NODE_MESH_CONFIRMRCV);
mesh_peer_timeout_setup(ni);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
case IEEE80211_NODE_MESH_HOLDING:
args[0] = ni->ni_mlpid;
args[1] = meshpeer->peer_llinkid;
/* Standard not clear about what the reaason code should be */
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
break;
case IEEE80211_NODE_MESH_CONFIRMRCV:
if (ni->ni_mllid != meshpeer->peer_llinkid) {
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
mesh_peer_timeout_setup(ni);
}
break;
default:
IEEE80211_DISCARD(vap,
IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
wh, NULL, "received confirm in invalid state %d",
ni->ni_mlstate);
vap->iv_stats.is_rx_mgtdiscard++;
break;
}
return 0;
}
static int
mesh_recv_action_meshpeering_close(struct ieee80211_node *ni,
const struct ieee80211_frame *wh,
const uint8_t *frm, const uint8_t *efrm)
{
struct ieee80211_meshpeer_ie ie;
const struct ieee80211_meshpeer_ie *meshpeer;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
uint16_t args[3];
/* +2 for action + code */
meshpeer = mesh_parse_meshpeering_action(ni, wh, frm+2, efrm, &ie,
IEEE80211_ACTION_MESHPEERING_CLOSE);
if (meshpeer == NULL) {
return 0;
}
/*
* XXX: check reason code, for example we could receive
* IEEE80211_REASON_MESH_MAX_PEERS then we should not attempt
* to peer again.
*/
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
ni, "%s", "recv PEER CLOSE");
switch (ni->ni_mlstate) {
case IEEE80211_NODE_MESH_IDLE:
/* ignore */
break;
case IEEE80211_NODE_MESH_OPENRCV:
case IEEE80211_NODE_MESH_OPENSNT:
case IEEE80211_NODE_MESH_CONFIRMRCV:
case IEEE80211_NODE_MESH_ESTABLISHED:
args[0] = ni->ni_mlpid;
args[1] = ni->ni_mllid;
args[2] = IEEE80211_REASON_MESH_CLOSE_RCVD;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE,
args);
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
mesh_peer_timeout_setup(ni);
break;
case IEEE80211_NODE_MESH_HOLDING:
mesh_linkchange(ni, IEEE80211_NODE_MESH_IDLE);
mesh_peer_timeout_stop(ni);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
}
return 0;
}
/*
* Link Metric handling.
*/
static int
mesh_recv_action_meshlmetric(struct ieee80211_node *ni,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
const struct ieee80211_frame *wh,
const uint8_t *frm, const uint8_t *efrm)
{
const struct ieee80211_meshlmetric_ie *ie =
(const struct ieee80211_meshlmetric_ie *)
(frm+2); /* action + code */
struct ieee80211_meshlmetric_ie lm_rep;
if (ie->lm_flags & IEEE80211_MESH_LMETRIC_FLAGS_REQ) {
lm_rep.lm_flags = 0;
lm_rep.lm_metric = mesh_airtime_calc(ni);
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_MESH,
IEEE80211_ACTION_MESH_LMETRIC,
&lm_rep);
}
/* XXX: else do nothing for now */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 0;
}
/*
* Parse meshgate action ie's for GANN frames.
* Returns -1 if parsing fails, otherwise 0.
*/
static int
mesh_parse_meshgate_action(struct ieee80211_node *ni,
const struct ieee80211_frame *wh, /* XXX for VERIFY_LENGTH */
struct ieee80211_meshgann_ie *ie, const uint8_t *frm, const uint8_t *efrm)
{
struct ieee80211vap *vap = ni->ni_vap;
const struct ieee80211_meshgann_ie *gannie;
while (efrm - frm > 1) {
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return -1);
switch (*frm) {
case IEEE80211_ELEMID_MESHGANN:
gannie = (const struct ieee80211_meshgann_ie *) frm;
memset(ie, 0, sizeof(*ie));
ie->gann_ie = gannie->gann_ie;
ie->gann_len = gannie->gann_len;
ie->gann_flags = gannie->gann_flags;
ie->gann_hopcount = gannie->gann_hopcount;
ie->gann_ttl = gannie->gann_ttl;
IEEE80211_ADDR_COPY(ie->gann_addr, gannie->gann_addr);
ie->gann_seq = LE_READ_4(&gannie->gann_seq);
ie->gann_interval = LE_READ_2(&gannie->gann_interval);
break;
}
frm += frm[1] + 2;
}
return 0;
}
/*
* Mesh Gate Announcement handling.
*/
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static int
mesh_recv_action_meshgate(struct ieee80211_node *ni,
const struct ieee80211_frame *wh,
const uint8_t *frm, const uint8_t *efrm)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
struct ieee80211_mesh_gate_route *gr, *next;
struct ieee80211_mesh_route *rt_gate;
struct ieee80211_meshgann_ie pgann;
struct ieee80211_meshgann_ie ie;
int found = 0;
/* +2 for action + code */
if (mesh_parse_meshgate_action(ni, wh, &ie, frm+2, efrm) != 0) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_MESH,
ni->ni_macaddr, NULL, "%s",
"GANN parsing failed");
vap->iv_stats.is_rx_mgtdiscard++;
return (0);
}
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, ie.gann_addr))
return 0;
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, ni->ni_macaddr,
"received GANN, meshgate: %6D (seq %u)", ie.gann_addr, ":",
ie.gann_seq);
if (ms == NULL)
return (0);
MESH_RT_LOCK(ms);
TAILQ_FOREACH_SAFE(gr, &ms->ms_known_gates, gr_next, next) {
if (!IEEE80211_ADDR_EQ(gr->gr_addr, ie.gann_addr))
continue;
if (ie.gann_seq <= gr->gr_lastseq) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_MESH,
ni->ni_macaddr, NULL,
"GANN old seqno %u <= %u",
ie.gann_seq, gr->gr_lastseq);
MESH_RT_UNLOCK(ms);
return (0);
}
/* corresponding mesh gate found & GANN accepted */
found = 1;
break;
}
if (found == 0) {
/* this GANN is from a new mesh Gate add it to known table. */
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, ie.gann_addr,
"stored new GANN information, seq %u.", ie.gann_seq);
gr = malloc(ALIGN(sizeof(struct ieee80211_mesh_gate_route)),
M_80211_MESH_GT_RT, M_NOWAIT | M_ZERO);
IEEE80211_ADDR_COPY(gr->gr_addr, ie.gann_addr);
TAILQ_INSERT_TAIL(&ms->ms_known_gates, gr, gr_next);
}
gr->gr_lastseq = ie.gann_seq;
/* check if we have a path to this gate */
rt_gate = mesh_rt_find_locked(ms, gr->gr_addr);
if (rt_gate != NULL &&
rt_gate->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) {
gr->gr_route = rt_gate;
rt_gate->rt_flags |= IEEE80211_MESHRT_FLAGS_GATE;
}
MESH_RT_UNLOCK(ms);
/* popagate only if decremented ttl >= 1 && forwarding is enabled */
if ((ie.gann_ttl - 1) < 1 && !(ms->ms_flags & IEEE80211_MESHFLAGS_FWD))
return 0;
pgann.gann_flags = ie.gann_flags; /* Reserved */
pgann.gann_hopcount = ie.gann_hopcount + 1;
pgann.gann_ttl = ie.gann_ttl - 1;
IEEE80211_ADDR_COPY(pgann.gann_addr, ie.gann_addr);
pgann.gann_seq = ie.gann_seq;
pgann.gann_interval = ie.gann_interval;
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, ie.gann_addr,
"%s", "propagate GANN");
ieee80211_send_action(vap->iv_bss, IEEE80211_ACTION_CAT_MESH,
IEEE80211_ACTION_MESH_GANN, &pgann);
return 0;
}
static int
mesh_send_action(struct ieee80211_node *ni,
const uint8_t sa[IEEE80211_ADDR_LEN],
const uint8_t da[IEEE80211_ADDR_LEN],
struct mbuf *m)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
struct ieee80211_bpf_params params;
struct ieee80211_frame *wh;
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
int ret;
KASSERT(ni != NULL, ("null node"));
if (vap->iv_state == IEEE80211_S_CAC) {
IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, ni,
"block %s frame in CAC state", "Mesh action");
vap->iv_stats.is_tx_badstate++;
ieee80211_free_node(ni);
m_freem(m);
return EIO; /* XXX */
}
M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT);
if (m == NULL) {
ieee80211_free_node(ni);
return ENOMEM;
}
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
IEEE80211_TX_LOCK(ic);
wh = mtod(m, struct ieee80211_frame *);
ieee80211_send_setup(ni, m,
IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_ACTION,
IEEE80211_NONQOS_TID, sa, da, sa);
m->m_flags |= M_ENCAP; /* mark encapsulated */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
memset(&params, 0, sizeof(params));
params.ibp_pri = WME_AC_VO;
params.ibp_rate0 = ni->ni_txparms->mgmtrate;
if (IEEE80211_IS_MULTICAST(da))
params.ibp_try0 = 1;
else
params.ibp_try0 = ni->ni_txparms->maxretry;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
params.ibp_power = ni->ni_txpower;
IEEE80211_NODE_STAT(ni, tx_mgmt);
Bring over my initial work from the net80211 TX locking branch. This patchset implements a new TX lock, covering both the per-VAP (and thus per-node) TX locking and the serialisation through to the underlying physical device. This implements the hard requirement that frames to the underlying physical device are scheduled to the underlying device in the same order that they are processed at the VAP layer. This includes adding extra encapsulation state (such as sequence numbers and CCMP IV numbers.) Any order mismatch here will result in dropped packets at the receiver. There are multiple transmit contexts from the upper protocol layers as well as the "raw" interface via the management and BPF transmit paths. All of these need to be correctly serialised or bad behaviour will result under load. The specifics: * add a new TX IC lock - it will eventually just be used for serialisation to the underlying physical device but for now it's used for both the VAP encapsulation/serialisation and the physical device dispatch. This lock is specifically non-recursive. * Methodize the parent transmit, vap transmit and ic_raw_xmit function pointers; use lock assertions in the parent/vap transmit routines. * Add a lock assertion in ieee80211_encap() - the TX lock must be held here to guarantee sensible behaviour. * Refactor out the packet sending code from ieee80211_start() - now ieee80211_start() is just a loop over the ifnet queue and it dispatches each VAP packet send through ieee80211_start_pkt(). Yes, I will likely rename ieee80211_start_pkt() to something that better reflects its status as a VAP packet transmit path. More on that later. * Add locking around the management and BAR TX sending - to ensure that encapsulation and TX are done hand-in-hand. * Add locking in the mesh code - again, to ensure that encapsulation and mesh transmit are done hand-in-hand. * Add locking around the power save queue and ageq handling, when dispatching to the parent interface. * Add locking around the WDS handoff. * Add a note in the mesh dispatch code that the TX path needs to be re-thought-out - right now it's doing a direct parent device transmit rather than going via the vap layer. It may "work", but it's likely incorrect (as it bypasses any possible per-node power save and aggregation handling.) Why not a per-VAP or per-node lock? Because in order to ensure per-VAP ordering, we'd have to hold the VAP lock across parent->if_transmit(). There are a few problems with this: * There's some state being setup during each driver transmit - specifically, the encryption encap / CCMP IV setup. That should eventually be dragged back into the encapsulation phase but for now it lives in the driver TX path. This should be locked. * Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to allocate sequence numbers when doing transmit aggregation. This should also be locked. * Drivers may have multiple frames queued already - so when one calls if_transmit(), it may end up dispatching multiple frames for different VAPs/nodes, each needing a different lock when handling that particular end destination. So to be "correct" locking-wise, we'd end up needing to grab a VAP or node lock inside the driver TX path when setting up crypto / AMPDU sequence numbers, and we may already _have_ a TX lock held - mostly for the same destination vap/node, but sometimes it'll be for others. That could lead to LORs and thus deadlocks. So for now, I'm sticking with an IC TX lock. It has the advantage of papering over the above and it also has the added advantage that I can assert that it's being held when doing a parent device transmit. I'll look at splitting the locks out a bit more later on. General outstanding net80211 TX path issues / TODO: * Look into separating out the VAP serialisation and the IC handoff. It's going to be tricky as parent->if_transmit() doesn't give me the opportunity to split queuing from driver dispatch. See above. * Work with monthadar to fix up the mesh transmit path so it doesn't go via the parent interface when retransmitting frames. * Push the encryption handling back into the driver, if it's at all architectually sane to do so. I know it's possible - it's what mac80211 in Linux does. * Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather than doing a short-cut direct into the driver. There are QoS issues here - you do want your management frames to be encapsulated and pushed onto the stack sooner than the (large, bursty) amount of data frames that are queued. But there has to be a saner way to do this. * Fragments are still broken - drivers need to be upgraded to an if_transmit() implementation and then fragmentation handling needs to be properly fixed. Tested: * STA - AR5416, AR9280, Intel 5300 abgn wifi * Hostap - AR5416, AR9160, AR9280 * Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00
ret = ieee80211_raw_output(vap, ni, m, &params);
IEEE80211_TX_UNLOCK(ic);
return (ret);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
#define ADDSHORT(frm, v) do { \
frm[0] = (v) & 0xff; \
frm[1] = (v) >> 8; \
frm += 2; \
} while (0)
#define ADDWORD(frm, v) do { \
frm[0] = (v) & 0xff; \
frm[1] = ((v) >> 8) & 0xff; \
frm[2] = ((v) >> 16) & 0xff; \
frm[3] = ((v) >> 24) & 0xff; \
frm += 4; \
} while (0)
static int
mesh_send_action_meshpeering_open(struct ieee80211_node *ni,
int category, int action, void *args0)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
uint16_t *args = args0;
const struct ieee80211_rateset *rs;
struct mbuf *m;
uint8_t *frm;
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
"send PEER OPEN action: localid 0x%x", args[0]);
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
ieee80211_ref_node(ni);
m = ieee80211_getmgtframe(&frm,
ic->ic_headroom + sizeof(struct ieee80211_frame),
sizeof(uint16_t) /* action+category */
+ sizeof(uint16_t) /* capabilites */
2012-02-03 02:06:14 +00:00
+ 2 + IEEE80211_RATE_SIZE
+ 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
+ 2 + IEEE80211_MESHID_LEN
2012-02-03 02:06:14 +00:00
+ sizeof(struct ieee80211_meshconf_ie)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
+ sizeof(struct ieee80211_meshpeer_ie)
);
if (m != NULL) {
/*
* mesh peer open action frame format:
* [1] category
* [1] action
* [2] capabilities
* [tlv] rates
* [tlv] xrates
* [tlv] mesh id
* [tlv] mesh conf
* [tlv] mesh peer link mgmt
*/
*frm++ = category;
*frm++ = action;
ADDSHORT(frm, ieee80211_getcapinfo(vap, ni->ni_chan));
rs = ieee80211_get_suprates(ic, ic->ic_curchan);
frm = ieee80211_add_rates(frm, rs);
frm = ieee80211_add_xrates(frm, rs);
frm = ieee80211_add_meshid(frm, vap);
frm = ieee80211_add_meshconf(frm, vap);
frm = ieee80211_add_meshpeer(frm, IEEE80211_ACTION_MESHPEERING_OPEN,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
args[0], 0, 0);
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
return mesh_send_action(ni, vap->iv_myaddr, ni->ni_macaddr, m);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
} else {
vap->iv_stats.is_tx_nobuf++;
ieee80211_free_node(ni);
return ENOMEM;
}
}
static int
mesh_send_action_meshpeering_confirm(struct ieee80211_node *ni,
int category, int action, void *args0)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
uint16_t *args = args0;
const struct ieee80211_rateset *rs;
struct mbuf *m;
uint8_t *frm;
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
"send PEER CONFIRM action: localid 0x%x, peerid 0x%x",
args[0], args[1]);
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
ieee80211_ref_node(ni);
m = ieee80211_getmgtframe(&frm,
ic->ic_headroom + sizeof(struct ieee80211_frame),
sizeof(uint16_t) /* action+category */
+ sizeof(uint16_t) /* capabilites */
+ sizeof(uint16_t) /* status code */
+ sizeof(uint16_t) /* AID */
2012-02-03 02:06:14 +00:00
+ 2 + IEEE80211_RATE_SIZE
+ 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
+ 2 + IEEE80211_MESHID_LEN
2012-02-03 02:06:14 +00:00
+ sizeof(struct ieee80211_meshconf_ie)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
+ sizeof(struct ieee80211_meshpeer_ie)
);
if (m != NULL) {
/*
* mesh peer confirm action frame format:
* [1] category
* [1] action
* [2] capabilities
* [2] status code
* [2] association id (peer ID)
* [tlv] rates
* [tlv] xrates
* [tlv] mesh id
* [tlv] mesh conf
* [tlv] mesh peer link mgmt
*/
*frm++ = category;
*frm++ = action;
ADDSHORT(frm, ieee80211_getcapinfo(vap, ni->ni_chan));
ADDSHORT(frm, 0); /* status code */
ADDSHORT(frm, args[1]); /* AID */
rs = ieee80211_get_suprates(ic, ic->ic_curchan);
frm = ieee80211_add_rates(frm, rs);
frm = ieee80211_add_xrates(frm, rs);
frm = ieee80211_add_meshid(frm, vap);
frm = ieee80211_add_meshconf(frm, vap);
frm = ieee80211_add_meshpeer(frm,
IEEE80211_ACTION_MESHPEERING_CONFIRM,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
args[0], args[1], 0);
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
return mesh_send_action(ni, vap->iv_myaddr, ni->ni_macaddr, m);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
} else {
vap->iv_stats.is_tx_nobuf++;
ieee80211_free_node(ni);
return ENOMEM;
}
}
static int
mesh_send_action_meshpeering_close(struct ieee80211_node *ni,
int category, int action, void *args0)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
uint16_t *args = args0;
struct mbuf *m;
uint8_t *frm;
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
"send PEER CLOSE action: localid 0x%x, peerid 0x%x reason %d",
args[0], args[1], args[2]);
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
ieee80211_ref_node(ni);
m = ieee80211_getmgtframe(&frm,
ic->ic_headroom + sizeof(struct ieee80211_frame),
sizeof(uint16_t) /* action+category */
+ sizeof(uint16_t) /* reason code */
+ 2 + IEEE80211_MESHID_LEN
2012-02-03 02:06:14 +00:00
+ sizeof(struct ieee80211_meshpeer_ie)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
);
if (m != NULL) {
/*
* mesh peer close action frame format:
* [1] category
* [1] action
* [tlv] mesh id
* [tlv] mesh peer link mgmt
*/
*frm++ = category;
*frm++ = action;
frm = ieee80211_add_meshid(frm, vap);
frm = ieee80211_add_meshpeer(frm,
IEEE80211_ACTION_MESHPEERING_CLOSE,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
args[0], args[1], args[2]);
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
return mesh_send_action(ni, vap->iv_myaddr, ni->ni_macaddr, m);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
} else {
vap->iv_stats.is_tx_nobuf++;
ieee80211_free_node(ni);
return ENOMEM;
}
}
static int
mesh_send_action_meshlmetric(struct ieee80211_node *ni,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
int category, int action, void *arg0)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_meshlmetric_ie *ie = arg0;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
struct mbuf *m;
uint8_t *frm;
if (ie->lm_flags & IEEE80211_MESH_LMETRIC_FLAGS_REQ) {
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
ni, "%s", "send LINK METRIC REQUEST action");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
} else {
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
ni, "send LINK METRIC REPLY action: metric 0x%x",
ie->lm_metric);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
ieee80211_ref_node(ni);
m = ieee80211_getmgtframe(&frm,
ic->ic_headroom + sizeof(struct ieee80211_frame),
sizeof(uint16_t) + /* action+category */
sizeof(struct ieee80211_meshlmetric_ie)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
);
if (m != NULL) {
/*
* mesh link metric
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
* [1] category
* [1] action
* [tlv] mesh link metric
*/
*frm++ = category;
*frm++ = action;
frm = ieee80211_add_meshlmetric(frm,
ie->lm_flags, ie->lm_metric);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
return mesh_send_action(ni, vap->iv_myaddr, ni->ni_macaddr, m);
} else {
vap->iv_stats.is_tx_nobuf++;
ieee80211_free_node(ni);
return ENOMEM;
}
}
static int
mesh_send_action_meshgate(struct ieee80211_node *ni,
int category, int action, void *arg0)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_meshgann_ie *ie = arg0;
struct mbuf *m;
uint8_t *frm;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
ieee80211_ref_node(ni);
m = ieee80211_getmgtframe(&frm,
ic->ic_headroom + sizeof(struct ieee80211_frame),
sizeof(uint16_t) + /* action+category */
IEEE80211_MESHGANN_BASE_SZ
);
if (m != NULL) {
/*
* mesh link metric
* [1] category
* [1] action
* [tlv] mesh gate annoucement
*/
*frm++ = category;
*frm++ = action;
frm = ieee80211_add_meshgate(frm, ie);
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
return mesh_send_action(ni, vap->iv_myaddr, broadcastaddr, m);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
} else {
vap->iv_stats.is_tx_nobuf++;
ieee80211_free_node(ni);
return ENOMEM;
}
}
static void
mesh_peer_timeout_setup(struct ieee80211_node *ni)
{
switch (ni->ni_mlstate) {
case IEEE80211_NODE_MESH_HOLDING:
ni->ni_mltval = ieee80211_mesh_holdingtimeout;
break;
case IEEE80211_NODE_MESH_CONFIRMRCV:
ni->ni_mltval = ieee80211_mesh_confirmtimeout;
break;
case IEEE80211_NODE_MESH_IDLE:
ni->ni_mltval = 0;
break;
default:
ni->ni_mltval = ieee80211_mesh_retrytimeout;
break;
}
if (ni->ni_mltval)
callout_reset(&ni->ni_mltimer, ni->ni_mltval,
mesh_peer_timeout_cb, ni);
}
/*
* Same as above but backoffs timer statisically 50%.
*/
static void
mesh_peer_timeout_backoff(struct ieee80211_node *ni)
{
uint32_t r;
r = arc4random();
ni->ni_mltval += r % ni->ni_mltval;
callout_reset(&ni->ni_mltimer, ni->ni_mltval, mesh_peer_timeout_cb,
ni);
}
static __inline void
mesh_peer_timeout_stop(struct ieee80211_node *ni)
{
callout_drain(&ni->ni_mltimer);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
static void
mesh_peer_backoff_cb(void *arg)
{
struct ieee80211_node *ni = (struct ieee80211_node *)arg;
/* After backoff timeout, try to peer automatically again. */
ni->ni_mlhcnt = 0;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/*
* Mesh Peer Link Management FSM timeout handling.
*/
static void
mesh_peer_timeout_cb(void *arg)
{
struct ieee80211_node *ni = (struct ieee80211_node *)arg;
uint16_t args[3];
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_MESH,
ni, "mesh link timeout, state %d, retry counter %d",
ni->ni_mlstate, ni->ni_mlrcnt);
switch (ni->ni_mlstate) {
case IEEE80211_NODE_MESH_IDLE:
case IEEE80211_NODE_MESH_ESTABLISHED:
break;
case IEEE80211_NODE_MESH_OPENSNT:
case IEEE80211_NODE_MESH_OPENRCV:
if (ni->ni_mlrcnt == ieee80211_mesh_maxretries) {
args[0] = ni->ni_mlpid;
args[2] = IEEE80211_REASON_MESH_MAX_RETRIES;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_CLOSE, args);
ni->ni_mlrcnt = 0;
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
mesh_peer_timeout_setup(ni);
} else {
args[0] = ni->ni_mlpid;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_ACTION_MESHPEERING_OPEN, args);
ni->ni_mlrcnt++;
mesh_peer_timeout_backoff(ni);
}
break;
case IEEE80211_NODE_MESH_CONFIRMRCV:
args[0] = ni->ni_mlpid;
args[2] = IEEE80211_REASON_MESH_CONFIRM_TIMEOUT;
ieee80211_send_action(ni,
IEEE80211_ACTION_CAT_SELF_PROT,
IEEE80211_ACTION_MESHPEERING_CLOSE, args);
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
mesh_peer_timeout_setup(ni);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
case IEEE80211_NODE_MESH_HOLDING:
ni->ni_mlhcnt++;
if (ni->ni_mlhcnt >= ieee80211_mesh_maxholding)
callout_reset(&ni->ni_mlhtimer,
ieee80211_mesh_backofftimeout,
mesh_peer_backoff_cb, ni);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
mesh_linkchange(ni, IEEE80211_NODE_MESH_IDLE);
break;
}
}
static int
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
mesh_verify_meshid(struct ieee80211vap *vap, const uint8_t *ie)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
if (ie == NULL || ie[1] != ms->ms_idlen)
return 1;
return memcmp(ms->ms_id, ie + 2, ms->ms_idlen);
}
/*
* Check if we are using the same algorithms for this mesh.
*/
static int
mesh_verify_meshconf(struct ieee80211vap *vap, const uint8_t *ie)
{
const struct ieee80211_meshconf_ie *meshconf =
(const struct ieee80211_meshconf_ie *) ie;
const struct ieee80211_mesh_state *ms = vap->iv_mesh;
if (meshconf == NULL)
return 1;
if (meshconf->conf_pselid != ms->ms_ppath->mpp_ie) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
"unknown path selection algorithm: 0x%x\n",
meshconf->conf_pselid);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
}
if (meshconf->conf_pmetid != ms->ms_pmetric->mpm_ie) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
"unknown path metric algorithm: 0x%x\n",
meshconf->conf_pmetid);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
}
if (meshconf->conf_ccid != 0) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
"unknown congestion control algorithm: 0x%x\n",
meshconf->conf_ccid);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
}
if (meshconf->conf_syncid != IEEE80211_MESHCONF_SYNC_NEIGHOFF) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
"unknown sync algorithm: 0x%x\n",
meshconf->conf_syncid);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
}
if (meshconf->conf_authid != 0) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
"unknown auth auth algorithm: 0x%x\n",
meshconf->conf_pselid);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
}
/* Not accepting peers */
if (!(meshconf->conf_cap & IEEE80211_MESHCONF_CAP_AP)) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
"not accepting peers: 0x%x\n", meshconf->conf_cap);
return 1;
}
return 0;
}
static int
mesh_verify_meshpeer(struct ieee80211vap *vap, uint8_t subtype,
const uint8_t *ie)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
{
const struct ieee80211_meshpeer_ie *meshpeer =
(const struct ieee80211_meshpeer_ie *) ie;
if (meshpeer == NULL ||
meshpeer->peer_len < IEEE80211_MPM_BASE_SZ ||
meshpeer->peer_len > IEEE80211_MPM_MAX_SZ)
return 1;
if (meshpeer->peer_proto != IEEE80211_MPPID_MPM) {
IEEE80211_DPRINTF(vap,
IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
"Only MPM protocol is supported (proto: 0x%02X)",
meshpeer->peer_proto);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
}
switch (subtype) {
case IEEE80211_ACTION_MESHPEERING_OPEN:
if (meshpeer->peer_len != IEEE80211_MPM_BASE_SZ)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
break;
case IEEE80211_ACTION_MESHPEERING_CONFIRM:
if (meshpeer->peer_len != IEEE80211_MPM_BASE_SZ + 2)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
break;
case IEEE80211_ACTION_MESHPEERING_CLOSE:
if (meshpeer->peer_len < IEEE80211_MPM_BASE_SZ + 2)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
if (meshpeer->peer_len == (IEEE80211_MPM_BASE_SZ + 2) &&
meshpeer->peer_linkid != 0)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return 1;
if (meshpeer->peer_rcode == 0)
return 1;
break;
}
return 0;
}
/*
* Add a Mesh ID IE to a frame.
*/
uint8_t *
ieee80211_add_meshid(uint8_t *frm, struct ieee80211vap *vap)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS, ("not a mbss vap"));
*frm++ = IEEE80211_ELEMID_MESHID;
*frm++ = ms->ms_idlen;
memcpy(frm, ms->ms_id, ms->ms_idlen);
return frm + ms->ms_idlen;
}
/*
* Add a Mesh Configuration IE to a frame.
* For now just use HWMP routing, Airtime link metric, Null Congestion
* Signaling, Null Sync Protocol and Null Authentication.
*/
uint8_t *
ieee80211_add_meshconf(uint8_t *frm, struct ieee80211vap *vap)
{
const struct ieee80211_mesh_state *ms = vap->iv_mesh;
2010-01-12 22:22:27 +00:00
uint16_t caps;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS, ("not a MBSS vap"));
*frm++ = IEEE80211_ELEMID_MESHCONF;
*frm++ = IEEE80211_MESH_CONF_SZ;
*frm++ = ms->ms_ppath->mpp_ie; /* path selection */
*frm++ = ms->ms_pmetric->mpm_ie; /* link metric */
*frm++ = IEEE80211_MESHCONF_CC_DISABLED;
*frm++ = IEEE80211_MESHCONF_SYNC_NEIGHOFF;
*frm++ = IEEE80211_MESHCONF_AUTH_DISABLED;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/* NB: set the number of neighbors before the rest */
*frm = (ms->ms_neighbors > IEEE80211_MESH_MAX_NEIGHBORS ?
IEEE80211_MESH_MAX_NEIGHBORS : ms->ms_neighbors) << 1;
if (ms->ms_flags & IEEE80211_MESHFLAGS_GATE)
*frm |= IEEE80211_MESHCONF_FORM_GATE;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
frm += 1;
2010-01-12 22:22:27 +00:00
caps = 0;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (ms->ms_flags & IEEE80211_MESHFLAGS_AP)
2010-01-12 22:22:27 +00:00
caps |= IEEE80211_MESHCONF_CAP_AP;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (ms->ms_flags & IEEE80211_MESHFLAGS_FWD)
2010-01-12 22:22:27 +00:00
caps |= IEEE80211_MESHCONF_CAP_FWRD;
*frm++ = caps;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
return frm;
}
/*
* Add a Mesh Peer Management IE to a frame.
*/
uint8_t *
ieee80211_add_meshpeer(uint8_t *frm, uint8_t subtype, uint16_t localid,
uint16_t peerid, uint16_t reason)
{
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
KASSERT(localid != 0, ("localid == 0"));
*frm++ = IEEE80211_ELEMID_MESHPEER;
switch (subtype) {
case IEEE80211_ACTION_MESHPEERING_OPEN:
*frm++ = IEEE80211_MPM_BASE_SZ; /* length */
ADDSHORT(frm, IEEE80211_MPPID_MPM); /* proto */
ADDSHORT(frm, localid); /* local ID */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
case IEEE80211_ACTION_MESHPEERING_CONFIRM:
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
KASSERT(peerid != 0, ("sending peer confirm without peer id"));
*frm++ = IEEE80211_MPM_BASE_SZ + 2; /* length */
ADDSHORT(frm, IEEE80211_MPPID_MPM); /* proto */
ADDSHORT(frm, localid); /* local ID */
ADDSHORT(frm, peerid); /* peer ID */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
case IEEE80211_ACTION_MESHPEERING_CLOSE:
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (peerid)
*frm++ = IEEE80211_MPM_MAX_SZ; /* length */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
else
*frm++ = IEEE80211_MPM_BASE_SZ + 2; /* length */
ADDSHORT(frm, IEEE80211_MPPID_MPM); /* proto */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ADDSHORT(frm, localid); /* local ID */
if (peerid)
ADDSHORT(frm, peerid); /* peer ID */
ADDSHORT(frm, reason);
break;
}
return frm;
}
/*
* Compute an Airtime Link Metric for the link with this node.
*
* Based on Draft 3.0 spec (11B.10, p.149).
*/
/*
* Max 802.11s overhead.
*/
#define IEEE80211_MESH_MAXOVERHEAD \
(sizeof(struct ieee80211_qosframe_addr4) \
+ sizeof(struct ieee80211_meshcntl_ae10) \
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
+ sizeof(struct llc) \
+ IEEE80211_ADDR_LEN \
+ IEEE80211_WEP_IVLEN \
+ IEEE80211_WEP_KIDLEN \
+ IEEE80211_WEP_CRCLEN \
+ IEEE80211_WEP_MICLEN \
+ IEEE80211_CRC_LEN)
uint32_t
mesh_airtime_calc(struct ieee80211_node *ni)
{
#define M_BITS 8
#define S_FACTOR (2 * M_BITS)
struct ieee80211com *ic = ni->ni_ic;
struct ifnet *ifp = ni->ni_vap->iv_ifp;
const static int nbits = 8192 << M_BITS;
uint32_t overhead, rate, errrate;
uint64_t res;
/* Time to transmit a frame */
rate = ni->ni_txrate;
overhead = ieee80211_compute_duration(ic->ic_rt,
ifp->if_mtu + IEEE80211_MESH_MAXOVERHEAD, rate, 0) << M_BITS;
/* Error rate in percentage */
/* XXX assuming small failures are ok */
errrate = (((ifp->if_get_counter(ifp, IFCOUNTER_OERRORS) +
ifp->if_get_counter(ifp, IFCOUNTER_IERRORS)) / 100) << M_BITS)
/ 100;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
res = (overhead + (nbits / rate)) *
((1 << S_FACTOR) / ((1 << M_BITS) - errrate));
return (uint32_t)(res >> S_FACTOR);
#undef M_BITS
#undef S_FACTOR
}
/*
* Add a Mesh Link Metric report IE to a frame.
*/
uint8_t *
ieee80211_add_meshlmetric(uint8_t *frm, uint8_t flags, uint32_t metric)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
{
*frm++ = IEEE80211_ELEMID_MESHLINK;
*frm++ = 5;
*frm++ = flags;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ADDWORD(frm, metric);
return frm;
}
/*
* Add a Mesh Gate Announcement IE to a frame.
*/
uint8_t *
ieee80211_add_meshgate(uint8_t *frm, struct ieee80211_meshgann_ie *ie)
{
*frm++ = IEEE80211_ELEMID_MESHGANN; /* ie */
*frm++ = IEEE80211_MESHGANN_BASE_SZ; /* len */
*frm++ = ie->gann_flags;
*frm++ = ie->gann_hopcount;
*frm++ = ie->gann_ttl;
IEEE80211_ADDR_COPY(frm, ie->gann_addr);
frm += 6;
ADDWORD(frm, ie->gann_seq);
ADDSHORT(frm, ie->gann_interval);
return frm;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#undef ADDSHORT
#undef ADDWORD
/*
* Initialize any mesh-specific node state.
*/
void
ieee80211_mesh_node_init(struct ieee80211vap *vap, struct ieee80211_node *ni)
{
ni->ni_flags |= IEEE80211_NODE_QOS;
callout_init(&ni->ni_mltimer, CALLOUT_MPSAFE);
callout_init(&ni->ni_mlhtimer, CALLOUT_MPSAFE);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
/*
* Cleanup any mesh-specific node state.
*/
void
ieee80211_mesh_node_cleanup(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_mesh_state *ms = vap->iv_mesh;
callout_drain(&ni->ni_mltimer);
callout_drain(&ni->ni_mlhtimer);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/* NB: short-circuit callbacks after mesh_vdetach */
if (vap->iv_mesh != NULL)
ms->ms_ppath->mpp_peerdown(ni);
}
void
ieee80211_parse_meshid(struct ieee80211_node *ni, const uint8_t *ie)
{
ni->ni_meshidlen = ie[1];
memcpy(ni->ni_meshid, ie + 2, ie[1]);
}
/*
* Setup mesh-specific node state on neighbor discovery.
*/
void
ieee80211_mesh_init_neighbor(struct ieee80211_node *ni,
const struct ieee80211_frame *wh,
const struct ieee80211_scanparams *sp)
{
ieee80211_parse_meshid(ni, sp->meshid);
}
void
ieee80211_mesh_update_beacon(struct ieee80211vap *vap,
struct ieee80211_beacon_offsets *bo)
{
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS, ("not a MBSS vap"));
if (isset(bo->bo_flags, IEEE80211_BEACON_MESHCONF)) {
(void)ieee80211_add_meshconf(bo->bo_meshconf, vap);
clrbit(bo->bo_flags, IEEE80211_BEACON_MESHCONF);
}
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static int
mesh_ioctl_get80211(struct ieee80211vap *vap, struct ieee80211req *ireq)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
uint8_t tmpmeshid[IEEE80211_NWID_LEN];
struct ieee80211_mesh_route *rt;
struct ieee80211req_mesh_route *imr;
size_t len, off;
uint8_t *p;
int error;
if (vap->iv_opmode != IEEE80211_M_MBSS)
return ENOSYS;
error = 0;
switch (ireq->i_type) {
case IEEE80211_IOC_MESH_ID:
ireq->i_len = ms->ms_idlen;
memcpy(tmpmeshid, ms->ms_id, ireq->i_len);
error = copyout(tmpmeshid, ireq->i_data, ireq->i_len);
break;
case IEEE80211_IOC_MESH_AP:
ireq->i_val = (ms->ms_flags & IEEE80211_MESHFLAGS_AP) != 0;
break;
case IEEE80211_IOC_MESH_FWRD:
ireq->i_val = (ms->ms_flags & IEEE80211_MESHFLAGS_FWD) != 0;
break;
case IEEE80211_IOC_MESH_GATE:
ireq->i_val = (ms->ms_flags & IEEE80211_MESHFLAGS_GATE) != 0;
break;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
case IEEE80211_IOC_MESH_TTL:
ireq->i_val = ms->ms_ttl;
break;
case IEEE80211_IOC_MESH_RTCMD:
switch (ireq->i_val) {
case IEEE80211_MESH_RTCMD_LIST:
len = 0;
MESH_RT_LOCK(ms);
TAILQ_FOREACH(rt, &ms->ms_routes, rt_next) {
len += sizeof(*imr);
}
MESH_RT_UNLOCK(ms);
if (len > ireq->i_len || ireq->i_len < sizeof(*imr)) {
ireq->i_len = len;
return ENOMEM;
}
ireq->i_len = len;
/* XXX M_WAIT? */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
p = malloc(len, M_TEMP, M_NOWAIT | M_ZERO);
if (p == NULL)
return ENOMEM;
off = 0;
MESH_RT_LOCK(ms);
TAILQ_FOREACH(rt, &ms->ms_routes, rt_next) {
if (off >= len)
break;
imr = (struct ieee80211req_mesh_route *)
(p + off);
IEEE80211_ADDR_COPY(imr->imr_dest,
rt->rt_dest);
IEEE80211_ADDR_COPY(imr->imr_nexthop,
rt->rt_nexthop);
imr->imr_metric = rt->rt_metric;
imr->imr_nhops = rt->rt_nhops;
imr->imr_lifetime =
ieee80211_mesh_rt_update(rt, 0);
imr->imr_lastmseq = rt->rt_lastmseq;
imr->imr_flags = rt->rt_flags; /* last */
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
off += sizeof(*imr);
}
MESH_RT_UNLOCK(ms);
error = copyout(p, (uint8_t *)ireq->i_data,
ireq->i_len);
free(p, M_TEMP);
break;
case IEEE80211_MESH_RTCMD_FLUSH:
case IEEE80211_MESH_RTCMD_ADD:
case IEEE80211_MESH_RTCMD_DELETE:
return EINVAL;
default:
return ENOSYS;
}
break;
case IEEE80211_IOC_MESH_PR_METRIC:
len = strlen(ms->ms_pmetric->mpm_descr);
if (ireq->i_len < len)
return EINVAL;
ireq->i_len = len;
error = copyout(ms->ms_pmetric->mpm_descr,
(uint8_t *)ireq->i_data, len);
break;
case IEEE80211_IOC_MESH_PR_PATH:
len = strlen(ms->ms_ppath->mpp_descr);
if (ireq->i_len < len)
return EINVAL;
ireq->i_len = len;
error = copyout(ms->ms_ppath->mpp_descr,
(uint8_t *)ireq->i_data, len);
break;
default:
return ENOSYS;
}
return error;
}
IEEE80211_IOCTL_GET(mesh, mesh_ioctl_get80211);
static int
mesh_ioctl_set80211(struct ieee80211vap *vap, struct ieee80211req *ireq)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
uint8_t tmpmeshid[IEEE80211_NWID_LEN];
uint8_t tmpaddr[IEEE80211_ADDR_LEN];
char tmpproto[IEEE80211_MESH_PROTO_DSZ];
int error;
if (vap->iv_opmode != IEEE80211_M_MBSS)
return ENOSYS;
error = 0;
switch (ireq->i_type) {
case IEEE80211_IOC_MESH_ID:
if (ireq->i_val != 0 || ireq->i_len > IEEE80211_MESHID_LEN)
return EINVAL;
error = copyin(ireq->i_data, tmpmeshid, ireq->i_len);
if (error != 0)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
memset(ms->ms_id, 0, IEEE80211_NWID_LEN);
ms->ms_idlen = ireq->i_len;
memcpy(ms->ms_id, tmpmeshid, ireq->i_len);
error = ENETRESET;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
case IEEE80211_IOC_MESH_AP:
if (ireq->i_val)
ms->ms_flags |= IEEE80211_MESHFLAGS_AP;
else
ms->ms_flags &= ~IEEE80211_MESHFLAGS_AP;
error = ENETRESET;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
case IEEE80211_IOC_MESH_FWRD:
if (ireq->i_val)
ms->ms_flags |= IEEE80211_MESHFLAGS_FWD;
else
ms->ms_flags &= ~IEEE80211_MESHFLAGS_FWD;
mesh_gatemode_setup(vap);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
case IEEE80211_IOC_MESH_GATE:
if (ireq->i_val)
ms->ms_flags |= IEEE80211_MESHFLAGS_GATE;
else
ms->ms_flags &= ~IEEE80211_MESHFLAGS_GATE;
break;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
case IEEE80211_IOC_MESH_TTL:
ms->ms_ttl = (uint8_t) ireq->i_val;
break;
case IEEE80211_IOC_MESH_RTCMD:
switch (ireq->i_val) {
case IEEE80211_MESH_RTCMD_LIST:
return EINVAL;
case IEEE80211_MESH_RTCMD_FLUSH:
ieee80211_mesh_rt_flush(vap);
break;
case IEEE80211_MESH_RTCMD_ADD:
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, ireq->i_data) ||
IEEE80211_ADDR_EQ(broadcastaddr, ireq->i_data))
return EINVAL;
error = copyin(ireq->i_data, &tmpaddr,
IEEE80211_ADDR_LEN);
if (error == 0)
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_mesh_discover(vap, tmpaddr, NULL);
break;
case IEEE80211_MESH_RTCMD_DELETE:
ieee80211_mesh_rt_del(vap, ireq->i_data);
break;
default:
return ENOSYS;
}
break;
case IEEE80211_IOC_MESH_PR_METRIC:
error = copyin(ireq->i_data, tmpproto, sizeof(tmpproto));
if (error == 0) {
error = mesh_select_proto_metric(vap, tmpproto);
if (error == 0)
error = ENETRESET;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
case IEEE80211_IOC_MESH_PR_PATH:
error = copyin(ireq->i_data, tmpproto, sizeof(tmpproto));
if (error == 0) {
error = mesh_select_proto_path(vap, tmpproto);
if (error == 0)
error = ENETRESET;
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
break;
default:
return ENOSYS;
}
return error;
}
IEEE80211_IOCTL_SET(mesh, mesh_ioctl_set80211);