d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
09410159b2
freebsd-nq/sys/dev/puc/puc_ebus.c

103 lines
3.2 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
* Copyright (c) 2003 Marcel Moolenaar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_puc.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
Add missing <sys/module.h> includes currently relying on nested include in <sys/kernel.h>
2004-06-03 06:10:02 +00:00
#include <sys/module.h>
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
#include <sys/bus.h>
#include <sys/conf.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#define PUC_ENTRAILS 1
#include <dev/puc/pucvar.h>
static int
puc_ebus_probe(device_t dev)
{
Recognize the SAB82532 in USIII machines.
2005-08-07 13:37:25 +00:00
const char *nm, *cmpt;
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
nm = ofw_bus_get_name(dev);
Recognize the SAB82532 in USIII machines.
2005-08-07 13:37:25 +00:00
cmpt = ofw_bus_get_compat(dev);
if (!strcmp(nm, "se") || (cmpt != NULL && !strcmp(cmpt, "sab82532"))) {
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
device_set_desc(dev, "Siemens SAB 82532 dual channel SCC");
MFp4: Return BUS_PROBE_LOW_PRIORITY for a successful probe. This is in preparation of the introduction of scc(4), which is going to handle SCCs in the near future.
2006-02-24 02:06:57 +00:00
return (BUS_PROBE_LOW_PRIORITY);
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
}
return (ENXIO);
}
static int
puc_ebus_attach(device_t dev)
{
struct puc_device_description dd;
int i;
bzero(&dd, sizeof(dd));
dd.name = device_get_desc(dev);
for (i = 0; i < 2; i++) {
dd.ports[i].type = PUC_PORT_TYPE_UART | PUC_PORT_UART_SAB82532;
dd.ports[i].bar = 0;
dd.ports[i].offset = 0x40 * i;
dd.ports[i].serialfreq = 0;
Account for ebus(4) defaulting to SYS_RES_MEMORY for memory resources since ebus.c rev. 1.22.
2005-06-04 20:29:28 +00:00
dd.ports[i].flags = PUC_FLAGS_MEMORY;
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
}
return (puc_attach(dev, &dd));
}
static device_method_t puc_ebus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, puc_ebus_probe),
DEVMETHOD(device_attach, puc_ebus_attach),
DEVMETHOD(bus_alloc_resource, puc_alloc_resource),
DEVMETHOD(bus_release_resource, puc_release_resource),
DEVMETHOD(bus_get_resource, puc_get_resource),
DEVMETHOD(bus_read_ivar, puc_read_ivar),
DEVMETHOD(bus_setup_intr, puc_setup_intr),
DEVMETHOD(bus_teardown_intr, puc_teardown_intr),
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
{ 0, 0 }
};
static driver_t puc_ebus_driver = {
"puc",
puc_ebus_methods,
sizeof(struct puc_softc),
};
DRIVER_MODULE(puc, ebus, puc_ebus_driver, puc_devclass, 0, 0);
Reference in New Issue Copy Permalink