65 lines
2.6 KiB
Plaintext
65 lines
2.6 KiB
Plaintext
|
<!-- This is an SGML document in the linuxdoc DTD of the Tutorial for
|
||
|
|
Configuring a FreeBSD for Dialup Services by Guy Helmer.
|
||
|
|
$Id: dialup.sgml,v 1.13 1996/08/15 20:52:18 mpp Exp $
|
||
|
|
|
||
|
|
The FreeBSD Documentation Project
|
||
|
|
|
||
|
|
<!DOCTYPE linuxdoc PUBLIC "-//FreeBSD//DTD linuxdoc//EN">
|
||
|
|
|
||
|
|
<linuxdoc>
|
||
|
|
<article>
|
||
|
|
<title> Serial Basics
|
||
|
|
<author> FAQ
|
||
|
|
<date> 24 Nov 1996, (c) 1996
|
||
|
|
|
||
|
|
<abstract> This section outlines some of the basics to get your serial ports working. This is really just a stepping stone into the section on PPP or Dialout if you are interested in modems.
|
||
|
|
</abstract>
|
||
|
|
|
||
|
|
<toc>
|
||
|
|
-->
|
||
|
|
|
||
|
|
<sect><heading>Serial Basics<label id="serial"></heading>
|
||
|
|
|
||
|
|
<p><em>Assembled from FAQ.</em>
|
||
|
|
|
||
|
|
This section should give you some general information about serial ports. If you do not find what you want here, check into the Terminal and Dialup sections of the handbook.
|
||
|
|
|
||
|
|
|
||
|
|
<p>
|
||
|
|
The <tt/ttydX/ (or <tt/cuaaX/) device is the regular device
|
||
|
|
you will want to open for your applications. When a process opens
|
||
|
|
the device, it will have a default set of terminal I/O settings.
|
||
|
|
You can see these settings with the command
|
||
|
|
<verb>
|
||
|
|
stty -a -f /dev/ttyd1
|
||
|
|
</verb>
|
||
|
|
|
||
|
|
When you change the settings to this device, the settings are in
|
||
|
|
effect until the device is closed. When it is reopened, it goes
|
||
|
|
back to the default set. To make changes to the default set, you
|
||
|
|
can open and adjust the settings of the ``initial state'' device.
|
||
|
|
For example, to turn on <tt/CLOCAL/ mode, 8 bits, and
|
||
|
|
<tt>XON/XOFF</tt> flow control by default for ttyd5, do:
|
||
|
|
<verb>
|
||
|
|
stty -f /dev/ttyid5 clocal cs8 ixon ixoff
|
||
|
|
</verb>
|
||
|
|
|
||
|
|
A good place to do this is in <tt>/etc/rc.serial</tt>. Now, an
|
||
|
|
application will have these settings by default when it opens
|
||
|
|
<tt/ttyd5/. It can still change these settings to its liking,
|
||
|
|
though.
|
||
|
|
|
||
|
|
You can also prevent certain settings from being changed by an
|
||
|
|
application by making adjustments to the ``lock state'' device.
|
||
|
|
For example, to lock the speed of <tt/ttyd5/ to 57600 bps, do
|
||
|
|
<verb>
|
||
|
|
stty -f /dev/ttyld5 57600
|
||
|
|
</verb>
|
||
|
|
|
||
|
|
Now, an application that opens <tt/ttyd5/ and tries to change the
|
||
|
|
speed of the port will be stuck with 57600 bps.
|
||
|
|
|
||
|
|
Naturally, you should make the initial state and lock state
|
||
|
|
devices writable only by <tt/root/. The <tt/MAKEDEV/ script does
|
||
|
|
<bf/NOT/ do this when it creates the device entries.
|