Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2007 The DragonFly Project. All rights reserved.
|
|
|
|
*
|
|
|
|
* This code is derived from software contributed to The DragonFly Project
|
|
|
|
* by Sepherosa Ziehau <sepherosa@gmail.com>
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
*
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
* distribution.
|
|
|
|
* 3. Neither the name of The DragonFly Project nor the names of its
|
|
|
|
* contributors may be used to endorse or promote products derived
|
|
|
|
* from this software without specific, prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
* COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*
|
|
|
|
* $DragonFly: src/sys/dev/netif/bwi/bwiphy.c,v 1.5 2008/01/15 09:01:13 sephe Exp $
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
|
|
#include "opt_inet.h"
|
2012-05-12 15:11:53 +00:00
|
|
|
#include "opt_wlan.h"
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/endian.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/bus.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/proc.h>
|
|
|
|
#include <sys/rman.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/sockio.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
|
|
|
|
#include <net/if.h>
|
2013-10-26 17:58:36 +00:00
|
|
|
#include <net/if_var.h>
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
#include <net/if_dl.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/if_types.h>
|
|
|
|
#include <net/if_arp.h>
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
#include <net/if_llc.h>
|
|
|
|
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
#include <net80211/ieee80211_radiotap.h>
|
|
|
|
#include <net80211/ieee80211_amrr.h>
|
|
|
|
|
|
|
|
#include <machine/bus.h>
|
|
|
|
|
|
|
|
#include <dev/bwi/bitops.h>
|
|
|
|
#include <dev/bwi/if_bwireg.h>
|
|
|
|
#include <dev/bwi/if_bwivar.h>
|
|
|
|
#include <dev/bwi/bwimac.h>
|
|
|
|
#include <dev/bwi/bwirf.h>
|
|
|
|
#include <dev/bwi/bwiphy.h>
|
|
|
|
|
|
|
|
static void bwi_phy_init_11a(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11g(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11b_rev2(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11b_rev4(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11b_rev5(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11b_rev6(struct bwi_mac *);
|
|
|
|
|
|
|
|
static void bwi_phy_config_11g(struct bwi_mac *);
|
|
|
|
static void bwi_phy_config_agc(struct bwi_mac *);
|
|
|
|
|
|
|
|
static void bwi_tbl_write_2(struct bwi_mac *mac, uint16_t, uint16_t);
|
|
|
|
static void bwi_tbl_write_4(struct bwi_mac *mac, uint16_t, uint32_t);
|
|
|
|
|
|
|
|
#define SUP_BPHY(num) { .rev = num, .init = bwi_phy_init_11b_rev##num }
|
|
|
|
|
|
|
|
static const struct {
|
|
|
|
uint8_t rev;
|
|
|
|
void (*init)(struct bwi_mac *);
|
|
|
|
} bwi_sup_bphy[] = {
|
|
|
|
SUP_BPHY(2),
|
|
|
|
SUP_BPHY(4),
|
|
|
|
SUP_BPHY(5),
|
|
|
|
SUP_BPHY(6)
|
|
|
|
};
|
|
|
|
|
|
|
|
#undef SUP_BPHY
|
|
|
|
|
|
|
|
#define BWI_PHYTBL_WRSSI 0x1000
|
|
|
|
#define BWI_PHYTBL_NOISE_SCALE 0x1400
|
|
|
|
#define BWI_PHYTBL_NOISE 0x1800
|
|
|
|
#define BWI_PHYTBL_ROTOR 0x2000
|
|
|
|
#define BWI_PHYTBL_DELAY 0x2400
|
|
|
|
#define BWI_PHYTBL_RSSI 0x4000
|
|
|
|
#define BWI_PHYTBL_SIGMA_SQ 0x5000
|
|
|
|
#define BWI_PHYTBL_WRSSI_REV1 0x5400
|
|
|
|
#define BWI_PHYTBL_FREQ 0x5800
|
|
|
|
|
|
|
|
static const uint16_t bwi_phy_freq_11g_rev1[] =
|
|
|
|
{ BWI_PHY_FREQ_11G_REV1 };
|
|
|
|
static const uint16_t bwi_phy_noise_11g_rev1[] =
|
|
|
|
{ BWI_PHY_NOISE_11G_REV1 };
|
|
|
|
static const uint16_t bwi_phy_noise_11g[] =
|
|
|
|
{ BWI_PHY_NOISE_11G };
|
|
|
|
static const uint32_t bwi_phy_rotor_11g_rev1[] =
|
|
|
|
{ BWI_PHY_ROTOR_11G_REV1 };
|
|
|
|
static const uint16_t bwi_phy_noise_scale_11g_rev2[] =
|
|
|
|
{ BWI_PHY_NOISE_SCALE_11G_REV2 };
|
|
|
|
static const uint16_t bwi_phy_noise_scale_11g_rev7[] =
|
|
|
|
{ BWI_PHY_NOISE_SCALE_11G_REV7 };
|
|
|
|
static const uint16_t bwi_phy_noise_scale_11g[] =
|
|
|
|
{ BWI_PHY_NOISE_SCALE_11G };
|
|
|
|
static const uint16_t bwi_phy_sigma_sq_11g_rev2[] =
|
|
|
|
{ BWI_PHY_SIGMA_SQ_11G_REV2 };
|
|
|
|
static const uint16_t bwi_phy_sigma_sq_11g_rev7[] =
|
|
|
|
{ BWI_PHY_SIGMA_SQ_11G_REV7 };
|
|
|
|
static const uint32_t bwi_phy_delay_11g_rev1[] =
|
|
|
|
{ BWI_PHY_DELAY_11G_REV1 };
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_phy_write(struct bwi_mac *mac, uint16_t ctrl, uint16_t data)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_CTRL, ctrl);
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_DATA, data);
|
|
|
|
}
|
|
|
|
|
|
|
|
uint16_t
|
|
|
|
bwi_phy_read(struct bwi_mac *mac, uint16_t ctrl)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_CTRL, ctrl);
|
|
|
|
return CSR_READ_2(sc, BWI_PHY_DATA);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bwi_phy_attach(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint8_t phyrev, phytype, phyver;
|
|
|
|
uint16_t val;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* Get PHY type/revision/version */
|
|
|
|
val = CSR_READ_2(sc, BWI_PHYINFO);
|
|
|
|
phyrev = __SHIFTOUT(val, BWI_PHYINFO_REV_MASK);
|
|
|
|
phytype = __SHIFTOUT(val, BWI_PHYINFO_TYPE_MASK);
|
|
|
|
phyver = __SHIFTOUT(val, BWI_PHYINFO_VER_MASK);
|
|
|
|
device_printf(sc->sc_dev, "PHY: type %d, rev %d, ver %d\n",
|
|
|
|
phytype, phyrev, phyver);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Verify whether the revision of the PHY type is supported
|
|
|
|
* Convert PHY type to ieee80211_phymode
|
|
|
|
*/
|
|
|
|
switch (phytype) {
|
|
|
|
case BWI_PHYINFO_TYPE_11A:
|
|
|
|
if (phyrev >= 4) {
|
|
|
|
device_printf(sc->sc_dev, "unsupported 11A PHY, "
|
|
|
|
"rev %u\n", phyrev);
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
phy->phy_init = bwi_phy_init_11a;
|
|
|
|
phy->phy_mode = IEEE80211_MODE_11A;
|
|
|
|
phy->phy_tbl_ctrl = BWI_PHYR_TBL_CTRL_11A;
|
|
|
|
phy->phy_tbl_data_lo = BWI_PHYR_TBL_DATA_LO_11A;
|
|
|
|
phy->phy_tbl_data_hi = BWI_PHYR_TBL_DATA_HI_11A;
|
|
|
|
break;
|
|
|
|
case BWI_PHYINFO_TYPE_11B:
|
|
|
|
#define N(arr) (int)(sizeof(arr) / sizeof(arr[0]))
|
|
|
|
for (i = 0; i < N(bwi_sup_bphy); ++i) {
|
|
|
|
if (phyrev == bwi_sup_bphy[i].rev) {
|
|
|
|
phy->phy_init = bwi_sup_bphy[i].init;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (i == N(bwi_sup_bphy)) {
|
|
|
|
device_printf(sc->sc_dev, "unsupported 11B PHY, "
|
|
|
|
"rev %u\n", phyrev);
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
#undef N
|
|
|
|
phy->phy_mode = IEEE80211_MODE_11B;
|
|
|
|
break;
|
|
|
|
case BWI_PHYINFO_TYPE_11G:
|
|
|
|
if (phyrev > 8) {
|
|
|
|
device_printf(sc->sc_dev, "unsupported 11G PHY, "
|
|
|
|
"rev %u\n", phyrev);
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
phy->phy_init = bwi_phy_init_11g;
|
|
|
|
phy->phy_mode = IEEE80211_MODE_11G;
|
|
|
|
phy->phy_tbl_ctrl = BWI_PHYR_TBL_CTRL_11G;
|
|
|
|
phy->phy_tbl_data_lo = BWI_PHYR_TBL_DATA_LO_11G;
|
|
|
|
phy->phy_tbl_data_hi = BWI_PHYR_TBL_DATA_HI_11G;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
device_printf(sc->sc_dev, "unsupported PHY type %d\n",
|
|
|
|
phytype);
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
phy->phy_rev = phyrev;
|
|
|
|
phy->phy_version = phyver;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_phy_set_bbp_atten(struct bwi_mac *mac, uint16_t bbp_atten)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint16_t mask = __BITS(3, 0);
|
|
|
|
|
|
|
|
if (phy->phy_version == 0) {
|
|
|
|
CSR_FILT_SETBITS_2(mac->mac_sc, BWI_BBP_ATTEN, ~mask,
|
|
|
|
__SHIFTIN(bbp_atten, mask));
|
|
|
|
} else {
|
|
|
|
if (phy->phy_version > 1)
|
|
|
|
mask <<= 2;
|
|
|
|
else
|
|
|
|
mask <<= 3;
|
|
|
|
PHY_FILT_SETBITS(mac, BWI_PHYR_BBP_ATTEN, ~mask,
|
|
|
|
__SHIFTIN(bbp_atten, mask));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bwi_phy_calibrate(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
|
|
|
|
/* Dummy read */
|
|
|
|
CSR_READ_4(mac->mac_sc, BWI_MAC_STATUS);
|
|
|
|
|
|
|
|
/* Don't re-init */
|
|
|
|
if (phy->phy_flags & BWI_PHY_F_CALIBRATED)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (phy->phy_mode == IEEE80211_MODE_11G && phy->phy_rev == 1) {
|
|
|
|
bwi_mac_reset(mac, 0);
|
|
|
|
bwi_phy_init_11g(mac);
|
|
|
|
bwi_mac_reset(mac, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
phy->phy_flags |= BWI_PHY_F_CALIBRATED;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_tbl_write_2(struct bwi_mac *mac, uint16_t ofs, uint16_t data)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
|
|
|
|
KASSERT(phy->phy_tbl_ctrl != 0 && phy->phy_tbl_data_lo != 0,
|
|
|
|
("phy_tbl_ctrl %d phy_tbl_data_lo %d",
|
|
|
|
phy->phy_tbl_ctrl, phy->phy_tbl_data_lo));
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_ctrl, ofs);
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_data_lo, data);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_tbl_write_4(struct bwi_mac *mac, uint16_t ofs, uint32_t data)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
|
|
|
|
KASSERT(phy->phy_tbl_data_lo != 0 && phy->phy_tbl_data_hi != 0 &&
|
|
|
|
phy->phy_tbl_ctrl != 0,
|
|
|
|
("phy_tbl_data_lo %d phy_tbl_data_hi %d phy_tbl_ctrl %d",
|
|
|
|
phy->phy_tbl_data_lo, phy->phy_tbl_data_hi, phy->phy_tbl_ctrl));
|
|
|
|
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_ctrl, ofs);
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_data_hi, data >> 16);
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_data_lo, data & 0xffff);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_nrssi_write(struct bwi_mac *mac, uint16_t ofs, int16_t data)
|
|
|
|
{
|
|
|
|
PHY_WRITE(mac, BWI_PHYR_NRSSI_CTRL, ofs);
|
|
|
|
PHY_WRITE(mac, BWI_PHYR_NRSSI_DATA, (uint16_t)data);
|
|
|
|
}
|
|
|
|
|
|
|
|
int16_t
|
|
|
|
bwi_nrssi_read(struct bwi_mac *mac, uint16_t ofs)
|
|
|
|
{
|
|
|
|
PHY_WRITE(mac, BWI_PHYR_NRSSI_CTRL, ofs);
|
|
|
|
return (int16_t)PHY_READ(mac, BWI_PHYR_NRSSI_DATA);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11a(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
/* TODO:11A */
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11g(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
struct bwi_rf *rf = &mac->mac_rf;
|
|
|
|
const struct bwi_tpctl *tpctl = &mac->mac_tpctl;
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1)
|
|
|
|
bwi_phy_init_11b_rev5(mac);
|
|
|
|
else
|
|
|
|
bwi_phy_init_11b_rev6(mac);
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 2 || (phy->phy_flags & BWI_PHY_F_LINKED))
|
|
|
|
bwi_phy_config_11g(mac);
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 2) {
|
|
|
|
PHY_WRITE(mac, 0x814, 0);
|
|
|
|
PHY_WRITE(mac, 0x815, 0);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 2) {
|
|
|
|
PHY_WRITE(mac, 0x811, 0);
|
|
|
|
PHY_WRITE(mac, 0x15, 0xc0);
|
|
|
|
} else if (phy->phy_rev > 5) {
|
|
|
|
PHY_WRITE(mac, 0x811, 0x400);
|
|
|
|
PHY_WRITE(mac, 0x15, 0xc0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 2 || (phy->phy_flags & BWI_PHY_F_LINKED)) {
|
|
|
|
uint16_t val;
|
|
|
|
|
|
|
|
val = PHY_READ(mac, 0x400) & 0xff;
|
|
|
|
if (val == 3 || val == 5) {
|
|
|
|
PHY_WRITE(mac, 0x4c2, 0x1816);
|
|
|
|
PHY_WRITE(mac, 0x4c3, 0x8006);
|
|
|
|
if (val == 5) {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4cc,
|
|
|
|
0xff, 0x1f00);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((phy->phy_rev <= 2 && (phy->phy_flags & BWI_PHY_F_LINKED)) ||
|
|
|
|
phy->phy_rev >= 2)
|
|
|
|
PHY_WRITE(mac, 0x47e, 0x78);
|
|
|
|
|
|
|
|
if (rf->rf_rev == 8) {
|
|
|
|
PHY_SETBITS(mac, 0x801, 0x80);
|
|
|
|
PHY_SETBITS(mac, 0x43e, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 2 && (phy->phy_flags & BWI_PHY_F_LINKED))
|
|
|
|
bwi_rf_get_gains(mac);
|
|
|
|
|
|
|
|
if (rf->rf_rev != 8)
|
|
|
|
bwi_rf_init(mac);
|
|
|
|
|
|
|
|
if (tpctl->tp_ctrl2 == 0xffff) {
|
|
|
|
bwi_rf_lo_update(mac);
|
|
|
|
} else {
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050 && rf->rf_rev == 8) {
|
|
|
|
RF_WRITE(mac, 0x52,
|
|
|
|
(tpctl->tp_ctrl1 << 4) | tpctl->tp_ctrl2);
|
|
|
|
} else {
|
2009-05-18 15:31:26 +00:00
|
|
|
RF_FILT_SETBITS(mac, 0x52, 0xfff0, tpctl->tp_ctrl2);
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 6) {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x36, 0xfff,
|
|
|
|
tpctl->tp_ctrl2 << 12);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_PA_GPIO9)
|
|
|
|
PHY_WRITE(mac, 0x2e, 0x8075);
|
|
|
|
else
|
|
|
|
PHY_WRITE(mac, 0x2e, 0x807f);
|
|
|
|
|
|
|
|
if (phy->phy_rev < 2)
|
|
|
|
PHY_WRITE(mac, 0x2f, 0x101);
|
|
|
|
else
|
|
|
|
PHY_WRITE(mac, 0x2f, 0x202);
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
|
|
|
|
bwi_rf_lo_adjust(mac, tpctl);
|
|
|
|
PHY_WRITE(mac, 0x80f, 0x8078);
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) == 0) {
|
|
|
|
bwi_rf_init_hw_nrssi_table(mac, 0xffff /* XXX */);
|
|
|
|
bwi_rf_set_nrssi_thr(mac);
|
|
|
|
} else if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
|
|
|
|
if (rf->rf_nrssi[0] == BWI_INVALID_NRSSI) {
|
|
|
|
KASSERT(rf->rf_nrssi[1] == BWI_INVALID_NRSSI,
|
|
|
|
("rf_nrssi[1] %d", rf->rf_nrssi[1]));
|
|
|
|
bwi_rf_calc_nrssi_slope(mac);
|
|
|
|
} else {
|
|
|
|
KASSERT(rf->rf_nrssi[1] != BWI_INVALID_NRSSI,
|
|
|
|
("rf_nrssi[1] %d", rf->rf_nrssi[1]));
|
|
|
|
bwi_rf_set_nrssi_thr(mac);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (rf->rf_rev == 8)
|
|
|
|
PHY_WRITE(mac, 0x805, 0x3230);
|
|
|
|
|
|
|
|
bwi_mac_init_tpctl_11bg(mac);
|
|
|
|
|
|
|
|
if (sc->sc_bbp_id == BWI_BBPID_BCM4306 && sc->sc_bbp_pkg == 2) {
|
|
|
|
PHY_CLRBITS(mac, 0x429, 0x4000);
|
|
|
|
PHY_CLRBITS(mac, 0x4c3, 0x8000);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11b_rev2(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
/* TODO:11B */
|
Replay r286410. Change KPI of how device drivers that provide wireless
connectivity interact with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.
Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
|
|
|
device_printf(mac->mac_sc->sc_dev,
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
"%s is not implemented yet\n", __func__);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11b_rev4(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_rf *rf = &mac->mac_rf;
|
|
|
|
uint16_t val, ofs;
|
|
|
|
u_int chan;
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_BPHY_CTRL, BWI_BPHY_CTRL_INIT);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x20, 0x301c);
|
|
|
|
PHY_WRITE(mac, 0x26, 0);
|
|
|
|
PHY_WRITE(mac, 0x30, 0xc6);
|
|
|
|
PHY_WRITE(mac, 0x88, 0x3e00);
|
|
|
|
|
|
|
|
for (ofs = 0, val = 0x3c3d; ofs < 30; ++ofs, val -= 0x202)
|
|
|
|
PHY_WRITE(mac, 0x89 + ofs, val);
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_MAGIC_REG1, BWI_PHY_MAGIC_REG1_VAL1);
|
|
|
|
|
|
|
|
chan = rf->rf_curchan;
|
|
|
|
if (chan == IEEE80211_CHAN_ANY)
|
|
|
|
chan = 6; /* Force to channel 6 */
|
|
|
|
bwi_rf_set_chan(mac, chan, 0);
|
|
|
|
|
|
|
|
if (rf->rf_type != BWI_RF_T_BCM2050) {
|
|
|
|
RF_WRITE(mac, 0x75, 0x80);
|
|
|
|
RF_WRITE(mac, 0x79, 0x81);
|
|
|
|
}
|
|
|
|
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x50, 0x23);
|
|
|
|
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050) {
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x70);
|
|
|
|
RF_WRITE(mac, 0x5b, 0x7b);
|
|
|
|
RF_WRITE(mac, 0x5c, 0xb0);
|
|
|
|
RF_WRITE(mac, 0x7a, 0xf);
|
|
|
|
PHY_WRITE(mac, 0x38, 0x677);
|
|
|
|
bwi_rf_init_bcm2050(mac);
|
|
|
|
}
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x14, 0x80);
|
|
|
|
PHY_WRITE(mac, 0x32, 0xca);
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
PHY_WRITE(mac, 0x32, 0xe0);
|
|
|
|
PHY_WRITE(mac, 0x35, 0x7c2);
|
|
|
|
|
|
|
|
bwi_rf_lo_update(mac);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x26, 0xcc00);
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
PHY_WRITE(mac, 0x26, 0xce00);
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_RF_CHAN_EX, 0x1100);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x88a3);
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x88c2);
|
|
|
|
|
|
|
|
bwi_mac_set_tpctl_11bg(mac, NULL);
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) {
|
|
|
|
bwi_rf_calc_nrssi_slope(mac);
|
|
|
|
bwi_rf_set_nrssi_thr(mac);
|
|
|
|
}
|
|
|
|
bwi_mac_init_tpctl_11bg(mac);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11b_rev5(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_rf *rf = &mac->mac_rf;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
u_int orig_chan;
|
|
|
|
|
|
|
|
if (phy->phy_version == 1)
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x50);
|
|
|
|
|
|
|
|
if (sc->sc_pci_subvid != PCI_VENDOR_BROADCOM &&
|
|
|
|
sc->sc_pci_subdid != BWI_PCI_SUBDEVICE_BU4306) {
|
|
|
|
uint16_t ofs, val;
|
|
|
|
|
|
|
|
val = 0x2120;
|
|
|
|
for (ofs = 0xa8; ofs < 0xc7; ++ofs) {
|
|
|
|
PHY_WRITE(mac, ofs, val);
|
|
|
|
val += 0x202;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x35, 0xf0ff, 0x700);
|
|
|
|
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
PHY_WRITE(mac, 0x38, 0x667);
|
|
|
|
|
|
|
|
if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050) {
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x20);
|
|
|
|
RF_SETBITS(mac, 0x51, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_RF_ANTDIV, 0);
|
|
|
|
|
|
|
|
PHY_SETBITS(mac, 0x802, 0x100);
|
|
|
|
PHY_SETBITS(mac, 0x42b, 0x2000);
|
|
|
|
PHY_WRITE(mac, 0x1c, 0x186a);
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x13, 0xff, 0x1900);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x35, 0xffc0, 0x64);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x5d, 0xff80, 0xa);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* TODO: bad_frame_preempt? */
|
|
|
|
|
|
|
|
if (phy->phy_version == 1) {
|
|
|
|
PHY_WRITE(mac, 0x26, 0xce00);
|
|
|
|
PHY_WRITE(mac, 0x21, 0x3763);
|
|
|
|
PHY_WRITE(mac, 0x22, 0x1bc3);
|
|
|
|
PHY_WRITE(mac, 0x23, 0x6f9);
|
|
|
|
PHY_WRITE(mac, 0x24, 0x37e);
|
|
|
|
} else {
|
|
|
|
PHY_WRITE(mac, 0x26, 0xcc00);
|
|
|
|
}
|
|
|
|
PHY_WRITE(mac, 0x30, 0xc6);
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_BPHY_CTRL, BWI_BPHY_CTRL_INIT);
|
|
|
|
|
|
|
|
if (phy->phy_version == 1)
|
|
|
|
PHY_WRITE(mac, 0x20, 0x3e1c);
|
|
|
|
else
|
|
|
|
PHY_WRITE(mac, 0x20, 0x301c);
|
|
|
|
|
|
|
|
if (phy->phy_version == 0)
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_MAGIC_REG1, BWI_PHY_MAGIC_REG1_VAL1);
|
|
|
|
|
|
|
|
/* Force to channel 7 */
|
|
|
|
orig_chan = rf->rf_curchan;
|
|
|
|
bwi_rf_set_chan(mac, 7, 0);
|
|
|
|
|
|
|
|
if (rf->rf_type != BWI_RF_T_BCM2050) {
|
|
|
|
RF_WRITE(mac, 0x75, 0x80);
|
|
|
|
RF_WRITE(mac, 0x79, 0x81);
|
|
|
|
}
|
|
|
|
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x50, 0x23);
|
|
|
|
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050) {
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x70);
|
|
|
|
}
|
|
|
|
|
|
|
|
RF_WRITE(mac, 0x5b, 0x7b);
|
|
|
|
RF_WRITE(mac, 0x5c, 0xb0);
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x7);
|
|
|
|
|
|
|
|
bwi_rf_set_chan(mac, orig_chan, 0);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x14, 0x80);
|
|
|
|
PHY_WRITE(mac, 0x32, 0xca);
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x88a3);
|
|
|
|
|
|
|
|
bwi_mac_set_tpctl_11bg(mac, NULL);
|
|
|
|
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
RF_WRITE(mac, 0x5d, 0xd);
|
|
|
|
|
|
|
|
CSR_FILT_SETBITS_2(sc, BWI_PHY_MAGIC_REG1, 0xffc0, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11b_rev6(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_rf *rf = &mac->mac_rf;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint16_t val, ofs;
|
|
|
|
u_int orig_chan;
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x3e, 0x817a);
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x58);
|
|
|
|
|
|
|
|
if (rf->rf_rev == 4 || rf->rf_rev == 5) {
|
|
|
|
RF_WRITE(mac, 0x51, 0x37);
|
|
|
|
RF_WRITE(mac, 0x52, 0x70);
|
|
|
|
RF_WRITE(mac, 0x53, 0xb3);
|
|
|
|
RF_WRITE(mac, 0x54, 0x9b);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x88);
|
|
|
|
RF_WRITE(mac, 0x5b, 0x88);
|
|
|
|
RF_WRITE(mac, 0x5d, 0x88);
|
|
|
|
RF_WRITE(mac, 0x5e, 0x88);
|
|
|
|
RF_WRITE(mac, 0x7d, 0x88);
|
|
|
|
HFLAGS_SETBITS(mac, BWI_HFLAG_MAGIC1);
|
|
|
|
} else if (rf->rf_rev == 8) {
|
|
|
|
RF_WRITE(mac, 0x51, 0);
|
|
|
|
RF_WRITE(mac, 0x52, 0x40);
|
|
|
|
RF_WRITE(mac, 0x53, 0xb7);
|
|
|
|
RF_WRITE(mac, 0x54, 0x98);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x88);
|
|
|
|
RF_WRITE(mac, 0x5b, 0x6b);
|
|
|
|
RF_WRITE(mac, 0x5c, 0xf);
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_ALT_IQ) {
|
|
|
|
RF_WRITE(mac, 0x5d, 0xfa);
|
|
|
|
RF_WRITE(mac, 0x5e, 0xd8);
|
|
|
|
} else {
|
|
|
|
RF_WRITE(mac, 0x5d, 0xf5);
|
|
|
|
RF_WRITE(mac, 0x5e, 0xb8);
|
|
|
|
}
|
|
|
|
RF_WRITE(mac, 0x73, 0x3);
|
|
|
|
RF_WRITE(mac, 0x7d, 0xa8);
|
|
|
|
RF_WRITE(mac, 0x7c, 0x1);
|
|
|
|
RF_WRITE(mac, 0x7e, 0x8);
|
|
|
|
}
|
|
|
|
|
|
|
|
val = 0x1e1f;
|
|
|
|
for (ofs = 0x88; ofs < 0x98; ++ofs) {
|
|
|
|
PHY_WRITE(mac, ofs, val);
|
|
|
|
val -= 0x202;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = 0x3e3f;
|
|
|
|
for (ofs = 0x98; ofs < 0xa8; ++ofs) {
|
|
|
|
PHY_WRITE(mac, ofs, val);
|
|
|
|
val -= 0x202;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = 0x2120;
|
|
|
|
for (ofs = 0xa8; ofs < 0xc8; ++ofs) {
|
|
|
|
PHY_WRITE(mac, ofs, (val & 0x3f3f));
|
|
|
|
val += 0x202;
|
2009-05-13 16:19:05 +00:00
|
|
|
|
|
|
|
/* XXX: delay 10 us to avoid PCI parity errors with BCM4318 */
|
2009-05-13 14:25:55 +00:00
|
|
|
DELAY(10);
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_mode == IEEE80211_MODE_11G) {
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x20);
|
|
|
|
RF_SETBITS(mac, 0x51, 0x4);
|
|
|
|
PHY_SETBITS(mac, 0x802, 0x100);
|
|
|
|
PHY_SETBITS(mac, 0x42b, 0x2000);
|
|
|
|
PHY_WRITE(mac, 0x5b, 0);
|
|
|
|
PHY_WRITE(mac, 0x5c, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Force to channel 7 */
|
|
|
|
orig_chan = rf->rf_curchan;
|
|
|
|
if (orig_chan >= 8)
|
|
|
|
bwi_rf_set_chan(mac, 1, 0);
|
|
|
|
else
|
|
|
|
bwi_rf_set_chan(mac, 13, 0);
|
|
|
|
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x50, 0x23);
|
|
|
|
|
|
|
|
DELAY(40);
|
|
|
|
|
|
|
|
if (rf->rf_rev < 6 || rf->rf_rev == 8) {
|
|
|
|
RF_SETBITS(mac, 0x7c, 0x2);
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
}
|
|
|
|
if (rf->rf_rev <= 2) {
|
|
|
|
RF_WRITE(mac, 0x7c, 0x20);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x70);
|
|
|
|
RF_WRITE(mac, 0x5b, 0x7b);
|
|
|
|
RF_WRITE(mac, 0x5c, 0xb0);
|
|
|
|
}
|
|
|
|
|
|
|
|
RF_FILT_SETBITS(mac, 0x7a, 0xf8, 0x7);
|
|
|
|
|
|
|
|
bwi_rf_set_chan(mac, orig_chan, 0);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x14, 0x200);
|
|
|
|
if (rf->rf_rev >= 6)
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x88c2);
|
|
|
|
else
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x8ac0);
|
|
|
|
PHY_WRITE(mac, 0x38, 0x668);
|
|
|
|
|
|
|
|
bwi_mac_set_tpctl_11bg(mac, NULL);
|
|
|
|
|
|
|
|
if (rf->rf_rev <= 5) {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x5d, 0xff80, 0x3);
|
|
|
|
if (rf->rf_rev <= 2)
|
|
|
|
RF_WRITE(mac, 0x5d, 0xd);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_version == 4) {
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_MAGIC_REG1, BWI_PHY_MAGIC_REG1_VAL2);
|
|
|
|
PHY_CLRBITS(mac, 0x61, 0xf000);
|
|
|
|
} else {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x2, 0xffc0, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_mode == IEEE80211_MODE_11B) {
|
|
|
|
CSR_WRITE_2(sc, BWI_BBP_ATTEN, BWI_BBP_ATTEN_MAGIC2);
|
|
|
|
PHY_WRITE(mac, 0x16, 0x410);
|
|
|
|
PHY_WRITE(mac, 0x17, 0x820);
|
|
|
|
PHY_WRITE(mac, 0x62, 0x7);
|
|
|
|
|
|
|
|
bwi_rf_init_bcm2050(mac);
|
|
|
|
bwi_rf_lo_update(mac);
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) {
|
|
|
|
bwi_rf_calc_nrssi_slope(mac);
|
|
|
|
bwi_rf_set_nrssi_thr(mac);
|
|
|
|
}
|
|
|
|
bwi_mac_init_tpctl_11bg(mac);
|
|
|
|
} else {
|
|
|
|
CSR_WRITE_2(sc, BWI_BBP_ATTEN, 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#define N(arr) (int)(sizeof(arr) / sizeof(arr[0]))
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_config_11g(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
const uint16_t *tbl;
|
|
|
|
uint16_t wrd_ofs1, wrd_ofs2;
|
|
|
|
int i, n;
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
PHY_WRITE(mac, 0x406, 0x4f19);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x429, 0xfc3f, 0x340);
|
|
|
|
PHY_WRITE(mac, 0x42c, 0x5a);
|
|
|
|
PHY_WRITE(mac, 0x427, 0x1a);
|
|
|
|
|
|
|
|
/* Fill frequency table */
|
|
|
|
for (i = 0; i < N(bwi_phy_freq_11g_rev1); ++i) {
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_FREQ + i,
|
|
|
|
bwi_phy_freq_11g_rev1[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fill noise table */
|
|
|
|
for (i = 0; i < N(bwi_phy_noise_11g_rev1); ++i) {
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_NOISE + i,
|
|
|
|
bwi_phy_noise_11g_rev1[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fill rotor table */
|
|
|
|
for (i = 0; i < N(bwi_phy_rotor_11g_rev1); ++i) {
|
|
|
|
/* NB: data length is 4 bytes */
|
|
|
|
bwi_tbl_write_4(mac, BWI_PHYTBL_ROTOR + i,
|
|
|
|
bwi_phy_rotor_11g_rev1[i]);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
bwi_nrssi_write(mac, 0xba98, (int16_t)0x7654); /* XXX */
|
|
|
|
|
|
|
|
if (phy->phy_rev == 2) {
|
|
|
|
PHY_WRITE(mac, 0x4c0, 0x1861);
|
|
|
|
PHY_WRITE(mac, 0x4c1, 0x271);
|
|
|
|
} else if (phy->phy_rev > 2) {
|
|
|
|
PHY_WRITE(mac, 0x4c0, 0x98);
|
|
|
|
PHY_WRITE(mac, 0x4c1, 0x70);
|
|
|
|
PHY_WRITE(mac, 0x4c9, 0x80);
|
|
|
|
}
|
|
|
|
PHY_SETBITS(mac, 0x42b, 0x800);
|
|
|
|
|
|
|
|
/* Fill RSSI table */
|
|
|
|
for (i = 0; i < 64; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_RSSI + i, i);
|
|
|
|
|
|
|
|
/* Fill noise table */
|
2011-10-10 02:54:58 +00:00
|
|
|
for (i = 0; i < N(bwi_phy_noise_11g); ++i) {
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_NOISE + i,
|
|
|
|
bwi_phy_noise_11g[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Fill noise scale table
|
|
|
|
*/
|
|
|
|
if (phy->phy_rev <= 2) {
|
|
|
|
tbl = bwi_phy_noise_scale_11g_rev2;
|
|
|
|
n = N(bwi_phy_noise_scale_11g_rev2);
|
|
|
|
} else if (phy->phy_rev >= 7 && (PHY_READ(mac, 0x449) & 0x200)) {
|
|
|
|
tbl = bwi_phy_noise_scale_11g_rev7;
|
|
|
|
n = N(bwi_phy_noise_scale_11g_rev7);
|
|
|
|
} else {
|
|
|
|
tbl = bwi_phy_noise_scale_11g;
|
|
|
|
n = N(bwi_phy_noise_scale_11g);
|
|
|
|
}
|
|
|
|
for (i = 0; i < n; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_NOISE_SCALE + i, tbl[i]);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Fill sigma square table
|
|
|
|
*/
|
|
|
|
if (phy->phy_rev == 2) {
|
|
|
|
tbl = bwi_phy_sigma_sq_11g_rev2;
|
|
|
|
n = N(bwi_phy_sigma_sq_11g_rev2);
|
|
|
|
} else if (phy->phy_rev > 2 && phy->phy_rev <= 8) {
|
|
|
|
tbl = bwi_phy_sigma_sq_11g_rev7;
|
|
|
|
n = N(bwi_phy_sigma_sq_11g_rev7);
|
|
|
|
} else {
|
|
|
|
tbl = NULL;
|
|
|
|
n = 0;
|
|
|
|
}
|
|
|
|
for (i = 0; i < n; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_SIGMA_SQ + i, tbl[i]);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
/* Fill delay table */
|
|
|
|
for (i = 0; i < N(bwi_phy_delay_11g_rev1); ++i) {
|
|
|
|
bwi_tbl_write_4(mac, BWI_PHYTBL_DELAY + i,
|
|
|
|
bwi_phy_delay_11g_rev1[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fill WRSSI (Wide-Band RSSI) table */
|
|
|
|
for (i = 4; i < 20; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_WRSSI_REV1 + i, 0x20);
|
|
|
|
|
|
|
|
bwi_phy_config_agc(mac);
|
|
|
|
|
|
|
|
wrd_ofs1 = 0x5001;
|
|
|
|
wrd_ofs2 = 0x5002;
|
|
|
|
} else {
|
|
|
|
/* Fill WRSSI (Wide-Band RSSI) table */
|
|
|
|
for (i = 0; i < 0x20; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_WRSSI + i, 0x820);
|
|
|
|
|
|
|
|
bwi_phy_config_agc(mac);
|
|
|
|
|
|
|
|
PHY_READ(mac, 0x400); /* Dummy read */
|
|
|
|
PHY_WRITE(mac, 0x403, 0x1000);
|
|
|
|
bwi_tbl_write_2(mac, 0x3c02, 0xf);
|
|
|
|
bwi_tbl_write_2(mac, 0x3c03, 0x14);
|
|
|
|
|
|
|
|
wrd_ofs1 = 0x401;
|
|
|
|
wrd_ofs2 = 0x402;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(BWI_IS_BRCM_BU4306(sc) && sc->sc_pci_revid == 0x17)) {
|
|
|
|
bwi_tbl_write_2(mac, wrd_ofs1, 0x2);
|
|
|
|
bwi_tbl_write_2(mac, wrd_ofs2, 0x1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* phy->phy_flags & BWI_PHY_F_LINKED ? */
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_PA_GPIO9)
|
|
|
|
PHY_WRITE(mac, 0x46e, 0x3cf);
|
|
|
|
}
|
|
|
|
|
|
|
|
#undef N
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Configure Automatic Gain Controller
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
bwi_phy_config_agc(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint16_t ofs;
|
|
|
|
|
|
|
|
ofs = phy->phy_rev == 1 ? 0x4c00 : 0;
|
|
|
|
|
|
|
|
bwi_tbl_write_2(mac, ofs, 0xfe);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 1, 0xd);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 2, 0x13);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 3, 0x19);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
bwi_tbl_write_2(mac, 0x1800, 0x2710);
|
|
|
|
bwi_tbl_write_2(mac, 0x1801, 0x9b83);
|
|
|
|
bwi_tbl_write_2(mac, 0x1802, 0x9b83);
|
|
|
|
bwi_tbl_write_2(mac, 0x1803, 0xf8d);
|
|
|
|
PHY_WRITE(mac, 0x455, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a5, 0xff, 0x5700);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x41a, 0xff80, 0xf);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x41a, 0xc07f, 0x2b80);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x48c, 0xf0ff, 0x300);
|
|
|
|
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x8);
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a0, 0xfff0, 0x8);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a1, 0xf0ff, 0x600);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a2, 0xf0ff, 0x700);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a0, 0xf0ff, 0x100);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1)
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a2, 0xfff0, 0x7);
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x488, 0xff00, 0x1c);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x488, 0xc0ff, 0x200);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x496, 0xff00, 0x1c);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x489, 0xff00, 0x20);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x489, 0xc0ff, 0x200);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x482, 0xff00, 0x2e);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x496, 0xff, 0x1a00);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x481, 0xff00, 0x28);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x481, 0xff, 0x2c00);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
PHY_WRITE(mac, 0x430, 0x92b);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x41b, 0xffe1, 0x2);
|
|
|
|
} else {
|
|
|
|
PHY_CLRBITS(mac, 0x41b, 0x1e);
|
|
|
|
PHY_WRITE(mac, 0x41f, 0x287a);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x420, 0xfff0, 0x4);
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 6) {
|
|
|
|
PHY_WRITE(mac, 0x422, 0x287a);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x420, 0xfff, 0x3000);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a8, 0x8080, 0x7874);
|
|
|
|
PHY_WRITE(mac, 0x48e, 0x1c00);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4ab, 0xf0ff, 0x600);
|
|
|
|
PHY_WRITE(mac, 0x48b, 0x5e);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x48c, 0xff00, 0x1e);
|
|
|
|
PHY_WRITE(mac, 0x48d, 0x2);
|
|
|
|
}
|
|
|
|
|
|
|
|
bwi_tbl_write_2(mac, ofs + 0x800, 0);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 0x801, 7);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 0x802, 16);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 0x803, 28);
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 6) {
|
|
|
|
PHY_CLRBITS(mac, 0x426, 0x3);
|
|
|
|
PHY_CLRBITS(mac, 0x426, 0x1000);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_set_gains(struct bwi_mac *mac, const struct bwi_gains *gains)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint16_t tbl_gain_ofs1, tbl_gain_ofs2, tbl_gain;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (phy->phy_rev <= 1) {
|
|
|
|
tbl_gain_ofs1 = 0x5000;
|
|
|
|
tbl_gain_ofs2 = tbl_gain_ofs1 + 16;
|
|
|
|
} else {
|
|
|
|
tbl_gain_ofs1 = 0x400;
|
|
|
|
tbl_gain_ofs2 = tbl_gain_ofs1 + 8;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
|
|
if (gains != NULL) {
|
|
|
|
tbl_gain = gains->tbl_gain1;
|
|
|
|
} else {
|
|
|
|
/* Bit swap */
|
|
|
|
tbl_gain = (i & 0x1) << 1;
|
|
|
|
tbl_gain |= (i & 0x2) >> 1;
|
|
|
|
}
|
|
|
|
bwi_tbl_write_2(mac, tbl_gain_ofs1 + i, tbl_gain);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < 16; ++i) {
|
|
|
|
if (gains != NULL)
|
|
|
|
tbl_gain = gains->tbl_gain2;
|
|
|
|
else
|
|
|
|
tbl_gain = i;
|
|
|
|
bwi_tbl_write_2(mac, tbl_gain_ofs2 + i, tbl_gain);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (gains == NULL || (gains != NULL && gains->phy_gain != -1)) {
|
|
|
|
uint16_t phy_gain1, phy_gain2;
|
|
|
|
|
|
|
|
if (gains != NULL) {
|
|
|
|
phy_gain1 =
|
|
|
|
((uint16_t)gains->phy_gain << 14) |
|
|
|
|
((uint16_t)gains->phy_gain << 6);
|
|
|
|
phy_gain2 = phy_gain1;
|
|
|
|
} else {
|
|
|
|
phy_gain1 = 0x4040;
|
|
|
|
phy_gain2 = 0x4000;
|
|
|
|
}
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a0, 0xbfbf, phy_gain1);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a1, 0xbfbf, phy_gain1);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a2, 0xbfbf, phy_gain2);
|
|
|
|
}
|
|
|
|
bwi_mac_dummy_xmit(mac);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_phy_clear_state(struct bwi_phy *phy)
|
|
|
|
{
|
|
|
|
phy->phy_flags &= ~BWI_CLEAR_PHY_FLAGS;
|
|
|
|
}
|