freebsd-nq/bin/df/df.1

.\" Copyright (c) 1989, 1990, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     @(#)df.1	8.3 (Berkeley) 5/8/95
.\" $FreeBSD$
.\"
.Dd April 22, 2004
.Dt DF 1
.Os
.Sh NAME
.Nm df
.Nd display free disk space
.Sh SYNOPSIS
.Nm
.Op Fl b | g | H | h | k | m | P
.Op Fl aciln
.Op Fl t Ar type
.Op Ar file | filesystem ...
.Sh DESCRIPTION
The
.Nm
utility
displays statistics about the amount of free disk space on the specified
.Ar file system
or on the file system of which
.Ar file
is a part.
Values are displayed in 512-byte per block counts.
If neither a file or a file system operand is specified,
statistics for all mounted file systems are displayed
(subject to the
.Fl t
option below).
.Pp
The following options are available:
.Bl -tag -width Ds
.It Fl a
Show all mount points, including those that were mounted with the MNT_IGNORE
flag.
.It Fl b
Use 512-byte blocks rather than the default.
Note that
this overrides the
.Ev BLOCKSIZE
specification from the environment.
.It Fl c
Display a grand total.
.It Fl g
Use 1073741824-byte (1-Gbyte) blocks rather than the default.
Note that
this overrides the
.Ev BLOCKSIZE
specification from the environment.
.It Fl H
"Human-readable" output.
Use unit suffixes: Byte, Kilobyte, Megabyte,
Gigabyte, Terabyte and Petabyte in order to reduce the number of
digits to four or fewer using base 10 for sizes.
.It Fl h
"Human-readable" output.
Use unit suffixes: Byte, Kilobyte, Megabyte,
Gigabyte, Terabyte and Petabyte in order to reduce the number of
digits to four or fewer using base 2 for sizes.
.It Fl i
Include statistics on the number of free inodes.
.It Fl k
Use 1024-byte (1-Kbyte) blocks rather than the default.
Note that
this overrides the
.Ev BLOCKSIZE
specification from the environment.
.It Fl l
Only display information about locally-mounted file systems.
.It Fl m
Use 1048576-byte (1-Mbyte) blocks rather than the default.
Note that
this overrides the
.Ev BLOCKSIZE
specification from the environment.
.It Fl n
Print out the previously obtained statistics from the file systems.
This option should be used if it is possible that one or more
file systems are in a state such that they will not be able to provide
statistics without a long delay.
When this option is specified,
.Nm
will not request new statistics from the file systems, but will respond
with the possibly stale statistics that were previously obtained.
.It Fl P
Use POSIX compliant output of 512-byte blocks rather than the default.
Note that this overrides the
.Ev BLOCKSIZE
specification from the environment.
.It Fl t
Only print out statistics for file systems of the specified types.
More than one type may be specified in a comma separated list.
The list of file system types can be prefixed with
.Dq no
to specify the file system types for which action should
.Em not
be taken.
For example, the
.Nm
command:
.Bd -literal -offset indent
df -t nonfs,nullfs
.Ed
.Pp
lists all file systems except those of type
.Tn NFS
and
.Tn NULLFS .
The
.Xr lsvfs 1
command can be used to find out the types of file systems
that are available on the system.
.El
.Sh ENVIRONMENT
.Bl -tag -width BLOCKSIZE
.It Ev BLOCKSIZE
If the environment variable
.Ev BLOCKSIZE
is set, the block counts will be displayed in units of that size block.
.El
.Sh BUGS
The
.Fl n
flag is ignored if a file or file system is specified. Also, if a mount
point is not accessible by the user, it is possible that the file system
information could be stale.
.Sh SEE ALSO
.Xr lsvfs 1 ,
.Xr quota 1 ,
.Xr fstatfs 2 ,
.Xr getfsstat 2 ,
.Xr statfs 2 ,
.Xr getmntinfo 3 ,
.Xr fstab 5 ,
.Xr mount 8 ,
.Xr quot 8
.Sh HISTORY
A
.Nm
command appeared in
.At v1 .
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.\" Copyright (c) 1989, 1990, 1993`
			`.\" The Regents of the University of California. All rights reserved.`
			`.\"`
			`.\" Redistribution and use in source and binary forms, with or without`
			`.\" modification, are permitted provided that the following conditions`
			`.\" are met:`
			`.\" 1. Redistributions of source code must retain the above copyright`
			`.\" notice, this list of conditions and the following disclaimer.`
			`.\" 2. Redistributions in binary form must reproduce the above copyright`
			`.\" notice, this list of conditions and the following disclaimer in the`
			`.\" documentation and/or other materials provided with the distribution.`
			`.\" 4. Neither the name of the University nor the names of its contributors`
			`.\" may be used to endorse or promote products derived from this software`
			`.\" without specific prior written permission.`
			`.\"`
			.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
			`.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE`
			`.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE`
			`.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE`
			`.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL`
			`.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS`
			`.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)`
			`.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT`
			`.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY`
			`.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF`
			`.\" SUCH DAMAGE.`
			`.\"`
Merge Lite2 mods, cleanup man page, and -Wall cleaning. 1996-12-14 05:56:03 +00:00			`.\" @(#)df.1 8.3 (Berkeley) 5/8/95`
$Id$ -> $FreeBSD$ 1999-08-27 23:15:48 +00:00			`.\" $FreeBSD$`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.\"`
Bump document date for the latest functional change. Minor markup tweaks. 2004-05-16 21:34:15 +00:00			`.Dd April 22, 2004`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Dt DF 1`
mdoc(7) police: removed HISTORY info from the .Os call. 2001-07-10 10:04:09 +00:00			`.Os`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Sh NAME`
			`.Nm df`
			`.Nd display free disk space`
			`.Sh SYNOPSIS`
mdoc(7) police: use the new features of the Nm macro. 2000-11-20 11:39:41 +00:00			`.Nm`
Bump document date for the latest functional change. Minor markup tweaks. 2004-05-16 21:34:15 +00:00			`.Op Fl b \| g \| H \| h \| k \| m \| P`
Add -c option simular to du(1). PR: 19635 Submitted by: cyrille.lefevre@laposte.net 2004-04-18 20:56:31 +00:00			`.Op Fl aciln`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Op Fl t Ar type`
Fix 'SYNOPSIS' and 'usage' 2002-08-26 04:56:23 +00:00			`.Op Ar file \| filesystem ...`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Sh DESCRIPTION`
Use `The .Nm utility' 2002-04-16 20:08:06 +00:00			`The`
			`.Nm`
			`utility`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`displays statistics about the amount of free disk space on the specified`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`.Ar file system`
			`or on the file system of which`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Ar file`
			`is a part.`
Removed occurrences of consecutive repeated words (such as "the the"). 1999-02-12 02:12:08 +00:00			`Values are displayed in 512-byte per block counts.`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`If neither a file or a file system operand is specified,`
			`statistics for all mounted file systems are displayed`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`(subject to the`
			`.Fl t`
			`option below).`
			`.Pp`
			`The following options are available:`
			`.Bl -tag -width Ds`
Most modern OSs have the ability to flag certain mounts as ones to be ignored by default by the df(1) program. This is used mostly to avoid stat()-ing entries that do not represent "real" disk mount points (such as those made by an automounter such as amd.) It is also useful not to have to stat() these entries because it takes longer to report them that for other file systems, being that these mount points are served by a user-level file server and resulting in several context switches. Worse, if the automounter is down unexpectedly, a causal df(1) will hang in an interruptible way. PR: kern/9764 Submitted by: Erez Zadok <ezk@cs.columbia.edu> 1999-11-01 04:57:43 +00:00			`.It Fl a`
			`Show all mount points, including those that were mounted with the MNT_IGNORE`
			`flag.`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`.It Fl b`
Mechanically kill hard sentence breaks. 2004-07-02 21:04:19 +00:00			`Use 512-byte blocks rather than the default.`
			`Note that`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`this overrides the`
			`.Ev BLOCKSIZE`
			`specification from the environment.`
Add -c option simular to du(1). PR: 19635 Submitted by: cyrille.lefevre@laposte.net 2004-04-18 20:56:31 +00:00			`.It Fl c`
			`Display a grand total.`
Add -g for gigabyte sizes. Approved by: jkh 2000-06-03 20:17:39 +00:00			`.It Fl g`
Mechanically kill hard sentence breaks. 2004-07-02 21:04:19 +00:00			`Use 1073741824-byte (1-Gbyte) blocks rather than the default.`
			`Note that`
Add -g for gigabyte sizes. Approved by: jkh 2000-06-03 20:17:39 +00:00			`this overrides the`
			`.Ev BLOCKSIZE`
			`specification from the environment.`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`.It Fl H`
Mechanically kill hard sentence breaks. 2004-07-02 21:04:19 +00:00			`"Human-readable" output.`
			`Use unit suffixes: Byte, Kilobyte, Megabyte,`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`Gigabyte, Terabyte and Petabyte in order to reduce the number of`
df(1) and ls(1) print units in 'four or fewer' not 'three or less'. PR: 35523 Submitted by: Tomas Svensson <tsn@gbdev.net> 2003-05-06 21:54:46 +00:00			`digits to four or fewer using base 10 for sizes.`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`.It Fl h`
Mechanically kill hard sentence breaks. 2004-07-02 21:04:19 +00:00			`"Human-readable" output.`
			`Use unit suffixes: Byte, Kilobyte, Megabyte,`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`Gigabyte, Terabyte and Petabyte in order to reduce the number of`
df(1) and ls(1) print units in 'four or fewer' not 'three or less'. PR: 35523 Submitted by: Tomas Svensson <tsn@gbdev.net> 2003-05-06 21:54:46 +00:00			`digits to four or fewer using base 2 for sizes.`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.It Fl i`
			`Include statistics on the number of free inodes.`
Gimme back my `-k' option! Also document `-t' option in the usage message. 1994-08-10 19:21:07 +00:00			`.It Fl k`
Mechanically kill hard sentence breaks. 2004-07-02 21:04:19 +00:00			`Use 1024-byte (1-Kbyte) blocks rather than the default.`
			`Note that`
Gimme back my `-k' option! Also document `-t' option in the usage message. 1994-08-10 19:21:07 +00:00			`this overrides the`
			`.Ev BLOCKSIZE`
			`specification from the environment.`
Added the -l option to df, so to be compatable with other unicies. PR: bin/27240 Reviewed by: GAWollman MFC after: 2 weeks 2001-06-04 23:07:15 +00:00			`.It Fl l`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`Only display information about locally-mounted file systems.`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`.It Fl m`
Mechanically kill hard sentence breaks. 2004-07-02 21:04:19 +00:00			`Use 1048576-byte (1-Mbyte) blocks rather than the default.`
			`Note that`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`this overrides the`
			`.Ev BLOCKSIZE`
			`specification from the environment.`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.It Fl n`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`Print out the previously obtained statistics from the file systems.`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`This option should be used if it is possible that one or more`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`file systems are in a state such that they will not be able to provide`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`statistics without a long delay.`
			`When this option is specified,`
Correct use of .Nm. 1998-05-13 07:35:44 +00:00			`.Nm`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`will not request new statistics from the file systems, but will respond`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`with the possibly stale statistics that were previously obtained.`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`.It Fl P`
Added the -l option to df, so to be compatable with other unicies. PR: bin/27240 Reviewed by: GAWollman MFC after: 2 weeks 2001-06-04 23:07:15 +00:00			`Use POSIX compliant output of 512-byte blocks rather than the default.`
add human readable output (-h and -H) Obtained from: parts of human readable code from OpenBSD Reviewed by: obrien add POSIX, byte and megabyte block size ouput flags PR: 13579 (POSIX flag) Submitted by: Mike Meyer <mwm@phone.net> 1999-12-15 03:44:09 +00:00			`Note that this overrides the`
			`.Ev BLOCKSIZE`
			`specification from the environment.`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.It Fl t`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`Only print out statistics for file systems of the specified types.`
Merged from Lite2. The man page no longer attempts to list all the vfs types. Fixed ordering of FreeBSD `k' option in synopsis. 1997-03-13 17:32:39 +00:00			`More than one type may be specified in a comma separated list.`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`The list of file system types can be prefixed with`
Merged from Lite2. The man page no longer attempts to list all the vfs types. Fixed ordering of FreeBSD `k' option in synopsis. 1997-03-13 17:32:39 +00:00			`.Dq no`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`to specify the file system types for which action should`
Merged from Lite2. The man page no longer attempts to list all the vfs types. Fixed ordering of FreeBSD `k' option in synopsis. 1997-03-13 17:32:39 +00:00			`.Em not`
			`be taken.`
			`For example, the`
Correct use of .Nm. 1998-05-13 07:35:44 +00:00			`.Nm`
Merged from Lite2. The man page no longer attempts to list all the vfs types. Fixed ordering of FreeBSD `k' option in synopsis. 1997-03-13 17:32:39 +00:00			`command:`
			`.Bd -literal -offset indent`
Remove vestiges of MFS. 2001-06-01 10:07:28 +00:00			`df -t nonfs,nullfs`
Merged from Lite2. The man page no longer attempts to list all the vfs types. Fixed ordering of FreeBSD `k' option in synopsis. 1997-03-13 17:32:39 +00:00			`.Ed`
			`.Pp`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`lists all file systems except those of type`
Merged from Lite2. The man page no longer attempts to list all the vfs types. Fixed ordering of FreeBSD `k' option in synopsis. 1997-03-13 17:32:39 +00:00			`.Tn NFS`
			`and`
Remove vestiges of MFS. 2001-06-01 10:07:28 +00:00			`.Tn NULLFS .`
Merged from Lite2. The man page no longer attempts to list all the vfs types. Fixed ordering of FreeBSD `k' option in synopsis. 1997-03-13 17:32:39 +00:00			`The`
Don't suggest sysctl(8) as a means for discovering what filesystem types are available; suggest lsvfs(1) instead. Reported by: Neil Blakey-Milner <nbm@rucus.ru.ac.za> 1999-08-26 16:47:03 +00:00			`.Xr lsvfs 1`
s/filesystem/file system/ as discussed on -developers 2002-08-21 17:32:44 +00:00			`command can be used to find out the types of file systems`
Don't suggest sysctl(8) as a means for discovering what filesystem types are available; suggest lsvfs(1) instead. Reported by: Neil Blakey-Milner <nbm@rucus.ru.ac.za> 1999-08-26 16:47:03 +00:00			`that are available on the system.`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.El`
.Sh ENVIRONMENT VARIABLES -> .Sh ENVIRONMENT PR: 6599 Reviewed by: phk Submitted by: Josh Gilliam <josh@quick.net> 1998-05-13 07:57:49 +00:00			`.Sh ENVIRONMENT`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Bl -tag -width BLOCKSIZE`
			`.It Ev BLOCKSIZE`
environmental -> environment. 1997-09-18 06:55:21 +00:00			`If the environment variable`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Ev BLOCKSIZE`
			`is set, the block counts will be displayed in units of that size block.`
			`.El`
			`.Sh BUGS`
			`The`
			`.Fl n`
Currently if a mount point is not accessible by the calling user, invalid information will be printed if the -t flag is specified. $ df -t ufs Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ad0s1a 495726 139944 316124 31% / /dev/ad0s1e 253678 6438 226946 3% /tmp /dev/ad0s1f 56206340 13594248 38115586 26% /usr /dev/ad0s1d 694126 19812 618784 3% /var /dev/ad0s1d 694126 19812 618784 3% /var $ Note that the mount point which is not accessible shows up as the previous file system that was printed. The reason for this is that df -t will call statfs(2) on the pathname supplied by getfsstat(2). This is done to refresh the file system statistics in the event that a previous file system had a long delay in providing its stats. This change affects the df utility in the following ways: o Teach df has to deal with statfs(2) failing. If statfs(2) fails, fall back on the possibly stale stats provided by the initial call to getfsstat(2). o Print a warning that the fs stats could possibly be stale o Modify the man page and document this new behavior as a bug. Approved by: bmilekic (mentor) PR: 68165 2004-07-20 18:24:47 +00:00			`flag is ignored if a file or file system is specified. Also, if a mount`
			`point is not accessible by the user, it is possible that the file system`
			`information could be stale.`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Sh SEE ALSO`
Don't suggest sysctl(8) as a means for discovering what filesystem types are available; suggest lsvfs(1) instead. Reported by: Neil Blakey-Milner <nbm@rucus.ru.ac.za> 1999-08-26 16:47:03 +00:00			`.Xr lsvfs 1 ,`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Xr quota 1 ,`
			`.Xr fstatfs 2 ,`
			`.Xr getfsstat 2 ,`
Sort cross references. 1997-01-13 00:25:51 +00:00			`.Xr statfs 2 ,`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Xr getmntinfo 3 ,`
			`.Xr fstab 5 ,`
			`.Xr mount 8 ,`
Don't suggest sysctl(8) as a means for discovering what filesystem types are available; suggest lsvfs(1) instead. Reported by: Neil Blakey-Milner <nbm@rucus.ru.ac.za> 1999-08-26 16:47:03 +00:00			`.Xr quot 8`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`.Sh HISTORY`
			`A`
Correct use of .Nm. 1998-05-13 07:35:44 +00:00			`.Nm`
BSD 4.4 Lite bin Sources 1994-05-26 06:18:55 +00:00			`command appeared in`
[HISTORY] command appeared in Version 1 AT&T UNIX Obtained from: A Quarter Century of UNIX, Peter H. Salus, page 41 1996-08-29 18:06:19 +00:00			`.At v1 .`