freebsd-nq/etc/rc

601 lines
12 KiB
Plaintext
Raw Normal View History

#!/bin/sh
1999-08-27 23:37:10 +00:00
# $FreeBSD$
# From: @(#)rc 5.27 (Berkeley) 6/5/91
# System startup script run by init on autoboot
# or after single-user.
# Output and error are redirected to console by init,
# and the console is the controlling terminal.
# Note that almost all of the user-configurable behavior is no longer in
# this file, but rather in /etc/defaults/rc.conf. Please check that file
# first before contemplating any changes here. If you do need to change
# this file for some reason, we would like to know about it.
stty status '^T'
# Set shell to ignore SIGINT (2), but not children;
# shell catches SIGQUIT (3) and returns to single user after fsck.
#
trap : 2
trap : 3 # shouldn't be needed
HOME=/
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin
export HOME PATH
# BOOTP diskless boot. We have to run the rc file early in order to
# retarget various config files.
#
if [ -r /etc/rc.diskless1 ]; then
dlv=`/sbin/sysctl -n vfs.nfs.diskless_valid 2> /dev/null`
if [ ${dlv:=0} != 0 ]; then
. /etc/rc.diskless1
fi
fi
# If there is a global system configuration file, suck it in.
#
if [ -r /etc/defaults/rc.conf ]; then
. /etc/defaults/rc.conf
source_rc_confs
elif [ -r /etc/rc.conf ]; then
. /etc/rc.conf
fi
# Configure ccd devices.
#
if [ -r /etc/ccd.conf ]; then
ccdconfig -C
fi
case ${start_vinum} in
[Yy][Ee][Ss])
vinum start
;;
esac
swapon -a
case $1 in
autoboot)
2000-05-11 06:31:59 +00:00
echo Automatic boot in progress...
fsck -p
case $? in
0)
;;
2)
exit 1
;;
4)
reboot
echo "reboot failed... help!"
exit 1
;;
8)
echo "Automatic file system check failed... help!"
exit 1
;;
12)
echo "Reboot interrupted"
exit 1
;;
130)
# interrupt before catcher installed
exit 1
;;
*)
echo "Unknown error in reboot"
exit 1
;;
esac
;;
*)
echo Skipping disk checks ...
;;
esac
set -T
trap "echo 'Reboot interrupted'; exit 1" 3
# root normally must be read/write, but if this is a BOOTP NFS
# diskless boot it does not have to be.
#
case ${root_rw_mount} in
[Nn][Oo] | '')
;;
*)
if ! mount -u -o rw / ; then
echo "Mounting root filesystem rw failed, startup aborted"
exit 1
fi
;;
esac
umount -a >/dev/null 2>&1
# Mount everything except nfs filesystems.
mount -a -t nonfs
case $? in
0)
;;
*)
echo "Mounting /etc/fstab filesystems failed, startup aborted"
exit 1
;;
esac
# Run custom disk mounting function here
#
if [ -n "${diskless_mount}" -a -r "${diskless_mount}" ]; then
sh ${diskless_mount}
fi
# Recover some entropy so the rebooting /dev/random can reseed
#
case ${entropy_file} in
[Nn][Oo] | '')
;;
*)
if [ -f ${entropy_file} -a -r ${entropy_file} -a -w /dev/random ]; then
echo "Reading entropy file"
if ! cat ${entropy_file} 2>/dev/null >/dev/random; then
if ! kldstat -n randomdev >/dev/null 2>&1; then
kldload randomdev && \
cat ${entropy_file} 2>/dev/null >/dev/random
fi
fi
if [ $? != 0 ]; then
echo "Writing entropy file to /dev/random failed"
fi
rm -f ${entropy_file}
fi
;;
esac
1994-11-02 09:43:38 +00:00
adjkerntz -i
purgedir() {
local dir file
if [ $# -eq 0 ]; then
purgedir .
else
for dir
do
(
cd "$dir" && ls | while read file
do
[ -d "$file" ] && purgedir "$file"
[ -f "$file" ] && rm -f "$file"
done
)
done
fi
}
clean_var() {
if [ ! -f /var/run/clean_var ]; then
rm -rf /var/run/*
purgedir /var/spool/lock
rm -rf /var/spool/uucp/.Temp/*
# Keep a copy of the boot messages around
dmesg >/var/run/dmesg.boot
# And an initial utmp file
(cd /var/run && cp /dev/null utmp && chmod 644 utmp;)
>/var/run/clean_var
fi
}
if [ -d /var/run -a -d /var/spool/lock -a -d /var/spool/uucp/.Temp ]; then
# network_pass1() *may* end up writing stuff to /var - we don't want to
# remove it immediately afterwards - *nor* to we want to fail to clean
# an nfs-mounted /var.
clean_var
fi
# Add additional swapfile, if configured.
#
case ${swapfile} in
[Nn][Oo] | '')
;;
*)
if [ -w "${swapfile}" -a -c /dev/vn0b ]; then
echo "Adding ${swapfile} as additional swap."
vnconfig /dev/vn0b ${swapfile} && swapon /dev/vn0b
fi
;;
esac
# Set sysctl variables as early as we can
#
if [ -r /etc/rc.sysctl ]; then
. /etc/rc.sysctl
fi
# Configure serial devices
#
if [ -r /etc/rc.serial ]; then
. /etc/rc.serial
fi
# Start up PC-card configuration
#
if [ -r /etc/rc.pccard ]; then
. /etc/rc.pccard
fi
# Start up the initial network configuration.
#
if [ -r /etc/rc.network ]; then
. /etc/rc.network # We only need to do this once.
network_pass1
fi
case ${ipv6_enable} in
[Yy][Ee][Ss])
if [ -r /etc/rc.network6 ]; then
. /etc/rc.network6 # We only need to do this once also.
network6_pass1
fi
;;
esac
# Mount NFS filesystems if present in /etc/fstab
case "`mount -d -a -t nfs`" in
*mount_nfs*)
echo -n "Mounting NFS file systems"
mount -a -t nfs
echo .
;;
esac
This is the rc work as provided by pts, I will me makeing some additional changes to it based upon other outstanding bug reports and commits made after his work. Comments: (a) sysconfig is still used to do all configuration. I was not going to change that out from under you.... a user never need edit netstart or rc* unless they're being very weird. (b) rc.maint has been folded back into rc. It is just unworkable as a separate chunk because of ordering bogosities (c) netstart does what it says... it starts up enough of the network to get up, it doesn't start every bloody daemon that might talk to a socket... netstart ifconfig's the devices and sets up routing if configured to do so. (d) nfs disks are mounted immediately after netstart completes (e) syslog is started as early as possible (right after nfs) so that error messages can get logged to remote syslog servers properly (f) named is started (there is an argument that says that named should be started before syslogd because if you are the dns server for your domain, you'd like named to resolve remote hosts in syslog.conf, but this is a minority case and the trivial workarround is to put the syslog host in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog to catch named errors, which is a MUCH more important and likely occurance) (g) NOW all of the rest of the network daemons such as the time stuff, RPC, NIS, NFS, Kerberos and inetd are started (h) the rest of the generic stuff is done (cron/printer/sendmail) (i) shared libraries are set (j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2, xtend, and all of the syscons stuff (this is actually started as /etc/rc.`uname -m` (k) the syscons stuff has gotten a serious cleaning to make it consistent with rc conventions (l) rc.local has had the comments about syscons removed (they are not relevant to this file now) and the full name of the kernel has been restored to /etc/motd Submitted by: pts
1995-03-30 06:26:19 +00:00
# Whack the pty perms back into shape.
#
chflags 0 /dev/tty[pqrsPQRS]*
chmod 666 /dev/tty[pqrsPQRS]*
1999-03-14 20:26:39 +00:00
chown root:wheel /dev/tty[pqrsPQRS]*
This is the rc work as provided by pts, I will me makeing some additional changes to it based upon other outstanding bug reports and commits made after his work. Comments: (a) sysconfig is still used to do all configuration. I was not going to change that out from under you.... a user never need edit netstart or rc* unless they're being very weird. (b) rc.maint has been folded back into rc. It is just unworkable as a separate chunk because of ordering bogosities (c) netstart does what it says... it starts up enough of the network to get up, it doesn't start every bloody daemon that might talk to a socket... netstart ifconfig's the devices and sets up routing if configured to do so. (d) nfs disks are mounted immediately after netstart completes (e) syslog is started as early as possible (right after nfs) so that error messages can get logged to remote syslog servers properly (f) named is started (there is an argument that says that named should be started before syslogd because if you are the dns server for your domain, you'd like named to resolve remote hosts in syslog.conf, but this is a minority case and the trivial workarround is to put the syslog host in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog to catch named errors, which is a MUCH more important and likely occurance) (g) NOW all of the rest of the network daemons such as the time stuff, RPC, NIS, NFS, Kerberos and inetd are started (h) the rest of the generic stuff is done (cron/printer/sendmail) (i) shared libraries are set (j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2, xtend, and all of the syscons stuff (this is actually started as /etc/rc.`uname -m` (k) the syscons stuff has gotten a serious cleaning to make it consistent with rc conventions (l) rc.local has had the comments about syscons removed (they are not relevant to this file now) and the full name of the kernel has been restored to /etc/motd Submitted by: pts
1995-03-30 06:26:19 +00:00
# Clean up left-over files
#
clean_var # If it hasn't already been done
rm /var/run/clean_var
This is the rc work as provided by pts, I will me makeing some additional changes to it based upon other outstanding bug reports and commits made after his work. Comments: (a) sysconfig is still used to do all configuration. I was not going to change that out from under you.... a user never need edit netstart or rc* unless they're being very weird. (b) rc.maint has been folded back into rc. It is just unworkable as a separate chunk because of ordering bogosities (c) netstart does what it says... it starts up enough of the network to get up, it doesn't start every bloody daemon that might talk to a socket... netstart ifconfig's the devices and sets up routing if configured to do so. (d) nfs disks are mounted immediately after netstart completes (e) syslog is started as early as possible (right after nfs) so that error messages can get logged to remote syslog servers properly (f) named is started (there is an argument that says that named should be started before syslogd because if you are the dns server for your domain, you'd like named to resolve remote hosts in syslog.conf, but this is a minority case and the trivial workarround is to put the syslog host in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog to catch named errors, which is a MUCH more important and likely occurance) (g) NOW all of the rest of the network daemons such as the time stuff, RPC, NIS, NFS, Kerberos and inetd are started (h) the rest of the generic stuff is done (cron/printer/sendmail) (i) shared libraries are set (j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2, xtend, and all of the syscons stuff (this is actually started as /etc/rc.`uname -m` (k) the syscons stuff has gotten a serious cleaning to make it consistent with rc conventions (l) rc.local has had the comments about syscons removed (they are not relevant to this file now) and the full name of the kernel has been restored to /etc/motd Submitted by: pts
1995-03-30 06:26:19 +00:00
# Clearing /tmp at boot-time seems to have a long tradition. It doesn't
# help in any way for long-living systems, and it might accidentally
# clobber files you would rather like to have preserved after a crash
# (if not using mfs /tmp anyway).
#
# See also the example of another cleanup policy in /etc/periodic/daily.
#
case ${clear_tmp_enable} in
[Yy][Ee][Ss])
echo clearing /tmp
# prune quickly with one rm, then use find to clean up /tmp/[lq]*
# (not needed with mfs /tmp, but doesn't hurt there...)
(cd /tmp && rm -rf [a-km-pr-zA-Z]* &&
find -d . ! -name . ! -name lost+found ! -name quota.user \
! -name quota.group -exec rm -rf -- {} \;)
;;
esac
# Remove X lock files, since they will prevent you from restarting X11
# after a system crash.
#
rm -f /tmp/.X*-lock /tmp/.X11-unix/*
# Snapshot any kernel -c changes back to disk here <someday>.
# This has changed with ELF and /kernel.config.
1997-05-01 05:57:29 +00:00
echo -n 'additional daemons:'
# Start system logging and name service. Named needs to start before syslogd
# if you don't have a /etc/resolv.conf.
This is the rc work as provided by pts, I will me makeing some additional changes to it based upon other outstanding bug reports and commits made after his work. Comments: (a) sysconfig is still used to do all configuration. I was not going to change that out from under you.... a user never need edit netstart or rc* unless they're being very weird. (b) rc.maint has been folded back into rc. It is just unworkable as a separate chunk because of ordering bogosities (c) netstart does what it says... it starts up enough of the network to get up, it doesn't start every bloody daemon that might talk to a socket... netstart ifconfig's the devices and sets up routing if configured to do so. (d) nfs disks are mounted immediately after netstart completes (e) syslog is started as early as possible (right after nfs) so that error messages can get logged to remote syslog servers properly (f) named is started (there is an argument that says that named should be started before syslogd because if you are the dns server for your domain, you'd like named to resolve remote hosts in syslog.conf, but this is a minority case and the trivial workarround is to put the syslog host in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog to catch named errors, which is a MUCH more important and likely occurance) (g) NOW all of the rest of the network daemons such as the time stuff, RPC, NIS, NFS, Kerberos and inetd are started (h) the rest of the generic stuff is done (cron/printer/sendmail) (i) shared libraries are set (j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2, xtend, and all of the syscons stuff (this is actually started as /etc/rc.`uname -m` (k) the syscons stuff has gotten a serious cleaning to make it consistent with rc conventions (l) rc.local has had the comments about syscons removed (they are not relevant to this file now) and the full name of the kernel has been restored to /etc/motd Submitted by: pts
1995-03-30 06:26:19 +00:00
#
case ${syslogd_enable} in
[Yy][Ee][Ss])
# Transitional symlink (for the next couple of years :) until all
# binaries have had a chance to move towards /var/run/log.
if [ ! -h /dev/log ]; then
# might complain for r/o root f/s
ln -sf /var/run/log /dev/log
fi
rm -f /var/run/log
echo -n ' syslogd'; syslogd ${syslogd_flags}
;;
esac
1997-05-01 05:57:29 +00:00
echo '.'
# Enable dumpdev so that savecore can see it.
# /var/crash should be a directory or a symbolic link
# to the crash directory if core dumps are to be saved.
#
case ${dumpdev} in
[Nn][Oo] | '')
;;
*)
if [ -e "${dumpdev}" -a -d /var/crash ]; then
dumpon ${dumpdev}
echo -n checking for core dump...
savecore /var/crash
fi
;;
esac
if [ -n "${network_pass1_done}" ]; then
network_pass2
This is the rc work as provided by pts, I will me makeing some additional changes to it based upon other outstanding bug reports and commits made after his work. Comments: (a) sysconfig is still used to do all configuration. I was not going to change that out from under you.... a user never need edit netstart or rc* unless they're being very weird. (b) rc.maint has been folded back into rc. It is just unworkable as a separate chunk because of ordering bogosities (c) netstart does what it says... it starts up enough of the network to get up, it doesn't start every bloody daemon that might talk to a socket... netstart ifconfig's the devices and sets up routing if configured to do so. (d) nfs disks are mounted immediately after netstart completes (e) syslog is started as early as possible (right after nfs) so that error messages can get logged to remote syslog servers properly (f) named is started (there is an argument that says that named should be started before syslogd because if you are the dns server for your domain, you'd like named to resolve remote hosts in syslog.conf, but this is a minority case and the trivial workarround is to put the syslog host in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog to catch named errors, which is a MUCH more important and likely occurance) (g) NOW all of the rest of the network daemons such as the time stuff, RPC, NIS, NFS, Kerberos and inetd are started (h) the rest of the generic stuff is done (cron/printer/sendmail) (i) shared libraries are set (j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2, xtend, and all of the syscons stuff (this is actually started as /etc/rc.`uname -m` (k) the syscons stuff has gotten a serious cleaning to make it consistent with rc conventions (l) rc.local has had the comments about syscons removed (they are not relevant to this file now) and the full name of the kernel has been restored to /etc/motd Submitted by: pts
1995-03-30 06:26:19 +00:00
fi
# Enable/Check the quotas (must be after ypbind if using NIS)
#
case ${enable_quotas} in
[Yy][Ee][Ss])
case ${check_quotas} in
[Yy][Ee][Ss])
echo -n 'checking quotas:'
quotacheck -a
echo ' done.'
;;
esac
echo -n 'enabling quotas:'
quotaon -a
echo ' done.'
;;
esac
if [ -n "${network_pass2_done}" ]; then
network_pass3
fi
# Build ps databases
#
This is the rc work as provided by pts, I will me makeing some additional changes to it based upon other outstanding bug reports and commits made after his work. Comments: (a) sysconfig is still used to do all configuration. I was not going to change that out from under you.... a user never need edit netstart or rc* unless they're being very weird. (b) rc.maint has been folded back into rc. It is just unworkable as a separate chunk because of ordering bogosities (c) netstart does what it says... it starts up enough of the network to get up, it doesn't start every bloody daemon that might talk to a socket... netstart ifconfig's the devices and sets up routing if configured to do so. (d) nfs disks are mounted immediately after netstart completes (e) syslog is started as early as possible (right after nfs) so that error messages can get logged to remote syslog servers properly (f) named is started (there is an argument that says that named should be started before syslogd because if you are the dns server for your domain, you'd like named to resolve remote hosts in syslog.conf, but this is a minority case and the trivial workarround is to put the syslog host in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog to catch named errors, which is a MUCH more important and likely occurance) (g) NOW all of the rest of the network daemons such as the time stuff, RPC, NIS, NFS, Kerberos and inetd are started (h) the rest of the generic stuff is done (cron/printer/sendmail) (i) shared libraries are set (j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2, xtend, and all of the syscons stuff (this is actually started as /etc/rc.`uname -m` (k) the syscons stuff has gotten a serious cleaning to make it consistent with rc conventions (l) rc.local has had the comments about syscons removed (they are not relevant to this file now) and the full name of the kernel has been restored to /etc/motd Submitted by: pts
1995-03-30 06:26:19 +00:00
dev_mkdb
# Check the password temp/lock file
#
if [ -e /etc/ptmp ]; then
This is the rc work as provided by pts, I will me makeing some additional changes to it based upon other outstanding bug reports and commits made after his work. Comments: (a) sysconfig is still used to do all configuration. I was not going to change that out from under you.... a user never need edit netstart or rc* unless they're being very weird. (b) rc.maint has been folded back into rc. It is just unworkable as a separate chunk because of ordering bogosities (c) netstart does what it says... it starts up enough of the network to get up, it doesn't start every bloody daemon that might talk to a socket... netstart ifconfig's the devices and sets up routing if configured to do so. (d) nfs disks are mounted immediately after netstart completes (e) syslog is started as early as possible (right after nfs) so that error messages can get logged to remote syslog servers properly (f) named is started (there is an argument that says that named should be started before syslogd because if you are the dns server for your domain, you'd like named to resolve remote hosts in syslog.conf, but this is a minority case and the trivial workarround is to put the syslog host in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog to catch named errors, which is a MUCH more important and likely occurance) (g) NOW all of the rest of the network daemons such as the time stuff, RPC, NIS, NFS, Kerberos and inetd are started (h) the rest of the generic stuff is done (cron/printer/sendmail) (i) shared libraries are set (j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2, xtend, and all of the syscons stuff (this is actually started as /etc/rc.`uname -m` (k) the syscons stuff has gotten a serious cleaning to make it consistent with rc conventions (l) rc.local has had the comments about syscons removed (they are not relevant to this file now) and the full name of the kernel has been restored to /etc/motd Submitted by: pts
1995-03-30 06:26:19 +00:00
logger -s -p auth.err \
"password file may be incorrect -- /etc/ptmp exists"
fi
case ${accounting_enable} in
[Yy][Ee][Ss])
if [ -d /var/account ]; then
echo 'turning on accounting'
if [ ! -e /var/account/acct ]; then
touch /var/account/acct
fi
accton /var/account/acct
fi
;;
esac
This is the rc work as provided by pts, I will me makeing some additional changes to it based upon other outstanding bug reports and commits made after his work. Comments: (a) sysconfig is still used to do all configuration. I was not going to change that out from under you.... a user never need edit netstart or rc* unless they're being very weird. (b) rc.maint has been folded back into rc. It is just unworkable as a separate chunk because of ordering bogosities (c) netstart does what it says... it starts up enough of the network to get up, it doesn't start every bloody daemon that might talk to a socket... netstart ifconfig's the devices and sets up routing if configured to do so. (d) nfs disks are mounted immediately after netstart completes (e) syslog is started as early as possible (right after nfs) so that error messages can get logged to remote syslog servers properly (f) named is started (there is an argument that says that named should be started before syslogd because if you are the dns server for your domain, you'd like named to resolve remote hosts in syslog.conf, but this is a minority case and the trivial workarround is to put the syslog host in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog to catch named errors, which is a MUCH more important and likely occurance) (g) NOW all of the rest of the network daemons such as the time stuff, RPC, NIS, NFS, Kerberos and inetd are started (h) the rest of the generic stuff is done (cron/printer/sendmail) (i) shared libraries are set (j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2, xtend, and all of the syscons stuff (this is actually started as /etc/rc.`uname -m` (k) the syscons stuff has gotten a serious cleaning to make it consistent with rc conventions (l) rc.local has had the comments about syscons removed (they are not relevant to this file now) and the full name of the kernel has been restored to /etc/motd Submitted by: pts
1995-03-30 06:26:19 +00:00
# Make shared lib searching a little faster. Leave /usr/lib first if you
# add your own entries or you may come to grief.
#
if [ -x /sbin/ldconfig ]; then
case `/usr/bin/objformat` in
elf)
_LDC=/usr/lib
for i in ${ldconfig_paths}; do
if [ -d "${i}" ]; then
_LDC="${_LDC} ${i}"
fi
done
echo 'setting ELF ldconfig path:' ${_LDC}
ldconfig -elf ${_LDC}
;;
esac
# Legacy aout support for i386 only
case `sysctl -n hw.machine` in
i386)
1999-02-13 05:30:49 +00:00
# Default the a.out ldconfig path.
: ${ldconfig_paths_aout=${ldconfig_paths}}
_LDC=/usr/lib/aout
for i in ${ldconfig_paths_aout}; do
if [ -d "${i}" ]; then
_LDC="${_LDC} ${i}"
fi
done
echo 'setting a.out ldconfig path:' ${_LDC}
ldconfig -aout ${_LDC}
;;
esac
fi
# Now start up miscellaneous daemons that don't belong anywhere else
#
1997-05-01 05:57:29 +00:00
echo -n starting standard daemons:
case ${inetd_enable} in
[Nn][Oo])
;;
*)
echo -n ' inetd'; inetd ${inetd_flags}
;;
esac
case ${cron_enable} in
[Nn][Oo])
;;
*)
echo -n ' cron'; cron
;;
esac
case ${lpd_enable} in
[Yy][Ee][Ss])
echo -n ' printer'; ${lpd_program:-/usr/sbin/lpd} ${lpd_flags}
;;
esac
case ${sendmail_enable} in
[Yy][Ee][Ss])
if [ -r /etc/mail/sendmail.cf ]; then
echo -n ' sendmail'; /usr/sbin/sendmail ${sendmail_flags}
fi
;;
esac
case ${sshd_enable} in
[Yy][Ee][Ss])
if [ -x ${sshd_program:-/usr/sbin/sshd} ]; then
echo -n ' sshd';
${sshd_program:-/usr/sbin/sshd} ${sshd_flags}
fi
;;
esac
case ${usbd_enable} in
[Yy][Ee][Ss])
1999-01-10 22:06:22 +00:00
echo -n ' usbd'; /usr/sbin/usbd ${usbd_flags}
;;
esac
1999-01-10 22:06:22 +00:00
echo '.'
# Recover vi editor files.
find /var/tmp/vi.recover ! -type f -a ! -type d -delete
vibackup=`echo /var/tmp/vi.recover/vi.*`
if [ "${vibackup}" != '/var/tmp/vi.recover/vi.*' ]; then
echo 'Recovering vi editor sessions'
for i in /var/tmp/vi.recover/vi.*; do
# Only test files that are readable.
if [ ! -r "${i}" ]; then
continue
fi
# Unmodified nvi editor backup files either have the
# execute bit set or are zero length. Delete them.
if [ -x "${i}" -o ! -s "${i}" ]; then
rm -f "${i}"
fi
done
# It is possible to get incomplete recovery files, if the editor
# crashes at the right time.
virecovery=`echo /var/tmp/vi.recover/recover.*`
if [ "${virecovery}" != "/var/tmp/vi.recover/recover.*" ]; then
for i in /var/tmp/vi.recover/recover.*; do
# Only test files that are readable.
if [ ! -r "${i}" ]; then
continue
fi
# Delete any recovery files that are zero length,
# corrupted, or that have no corresponding backup file.
# Else send mail to the user.
2000-01-05 09:19:27 +00:00
recfile=`awk '/^X-vi-recover-path:/{print $2}' < "${i}"`
if [ -n "${recfile}" -a -s "${recfile}" ]; then
sendmail -t < "${i}"
else
rm -f "${i}"
fi
done
fi
fi
# Make a bounds file for msgs(1) if there isn't one already
# "Delete important files with symlink" security hole?
#
if [ -d /var/msgs -a ! -f /var/msgs/bounds ]; then
echo 0 > /var/msgs/bounds
fi
case ${update_motd} in
[Nn][Oo] | '')
;;
*)
if T=`mktemp /tmp/_motd.XXXXXX`; then
uname -v | sed -e 's,^\([^#]*\) #\(.* [1-2][0-9][0-9][0-9]\).*/\([^\]*\) $,\1 (\3) #\2,' > ${T}
awk '{if (NR == 1) {if ($1 == "FreeBSD") {next} else {print "\n"$0}} else {print}}' < /etc/motd >> ${T}
cmp -s ${T} /etc/motd || {
cp ${T} /etc/motd
chmod 644 /etc/motd
}
rm -f ${T}
fi
;;
esac
# Configure implementation specific stuff
#
arch=`uname -m`
if [ -r /etc/rc.${arch} ]; then
. /etc/rc.${arch}
fi
# Run rc.devfs if readable to customize devfs
#
if [ -r /etc/rc.devfs ]; then
sh /etc/rc.devfs
fi
# Do traditional (but rather obsolete) rc.local file if it exists. If you
1999-02-13 05:30:49 +00:00
# use this file and want to make it programmatic, source /etc/defaults/rc.conf
# in /etc/rc.local and add your custom variables to /etc/rc.conf, as
# shown below. Please do not put local extensions into /etc/rc itself.
# Use /etc/rc.local
#
# ---- rc.local ----
# if [ -r /etc/defaults/rc.conf ]; then
# . /etc/defaults/rc.conf
# source_rc_confs
# elif [ -r /etc/rc.conf ]; then
# . /etc/rc.conf
# fi
#
# ... additional startup conditionals ...
# ---- rc.local ----
#
if [ -r /etc/rc.local ]; then
echo -n 'starting local daemons:'
sh /etc/rc.local
echo '.'
fi
# For each valid dir in $local_startup, search for init scripts matching *.sh
#
case ${local_startup} in
[Nn][Oo] | '')
;;
*)
echo -n 'Local package initialization:'
for dir in ${local_startup}; do
if [ -d "${dir}" ]; then
for script in ${dir}/*.sh; do
if [ -x "${script}" ]; then
(set -T
trap 'exit 1' 2
${script} start)
fi
done
fi
done
echo .
;;
esac
if [ -n "${network_pass3_done}" ]; then
network_pass4
fi
# Raise kernel security level. This should be done only after `fsck' has
# repaired local file systems if you want the securelevel to be greater than 1.
#
case ${kern_securelevel_enable} in
[Yy][Ee][Ss])
if [ "${kern_securelevel}" -ge 0 ]; then
echo 'Raising kernel security level'
sysctl -w kern.securelevel=${kern_securelevel}
fi
;;
esac
date
exit 0