d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1077fa97b3
freebsd-nq/sys/i386/isa/fd.c

2237 lines
53 KiB
C
Raw Normal View History

Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
/*
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Don Ahn.
*
Finally implement support for the `lsdev' program. The controller is now marked busy as long as it's being in non-reset state, and the drives are busy as long as at least one instance is open. Also reformat everything to fit into 80 columns again. Changed my mind wrt. error reporting for a write-protected drive and an open() with write intent; ENXIO has been too weird, now return EIO. Some portions of the code need to be rewritten to use tprintf() instead of simple printf()'s, so the messages will also appear on the session terminal, however.
1995-01-11 16:13:01 +00:00
* Copyright (c) 1993, 1994 by
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
* jc@irbs.UUCP (John Capo)
* vak@zebub.msk.su (Serge Vakulenko)
* ache@astral.msk.su (Andrew A. Chernov)
Finally implement support for the `lsdev' program. The controller is now marked busy as long as it's being in non-reset state, and the drives are busy as long as at least one instance is open. Also reformat everything to fit into 80 columns again. Changed my mind wrt. error reporting for a write-protected drive and an open() with write intent; ENXIO has been too weird, now return EIO. Some portions of the code need to be rewritten to use tprintf() instead of simple printf()'s, so the messages will also appear on the session terminal, however.
1995-01-11 16:13:01 +00:00
*
* Copyright (c) 1993, 1994, 1995 by
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
* joerg_wunsch@uriah.sax.de (Joerg Wunsch)
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
* dufault@hda.com (Peter Dufault)
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
*
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
Removed $Log$ section and patch kit headers. And here is the full message for Bruces changes: >From: bde@kralizec.zeta.org.au (Bruce Evans) >Subject: fixes for fd driver I think I've fixed some bugs in the 0.2.4 fd driver. 1. The main cause of hangs was that there was no timeout for seeks. So attempting i/o with no floppy in the drive hung iff a seek was required. 2. Opens of unattached drives were allowed. The kernel usually paniced soon after due to a bad pointer. 3. Some timeout functions ran at splclock() instead of splbio(). This may not have mattered. 4. The state machine was left in a funny state after a timeout. 5. Some function headers were new-style. 6. I picked up some code posted the other day to implement label ioctls. Now `disklabel fd0' works. See a comment for how to modify conf.c.
1993-09-15 23:27:45 +00:00
* from: @(#)fd.c 7.4 (Berkeley) 5/25/91
close() is no longer a SLICE method. Close is simply an open with no-read and no-write once internal to SLICE (it still exports a close to the rest of the kernel)
1998-04-22 10:25:27 +00:00
* $Id: fd.c,v 1.109 1998/04/19 23:31:41 julian Exp $
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
*
*/
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#include "ft.h"
#if NFT < 1
#undef NFDC
#endif
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
#include "fd.h"
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
#include "opt_devfs.h"
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#include "opt_fdc.h"
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#if NFDC > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
Don't #include <sys/fcntl.h> in <sys/file.h> if KERNEL is defined. Fixed everything that depended on getting fcntl.h stuff from the wrong place. Most things don't depend on file.h stuff at all.
1997-03-23 03:37:54 +00:00
#include <sys/fcntl.h>
Declare all the args of Fdopen() and fdclose(). Initialize dk_wpms[] less bogusly. Clean up includes. Remove some obsolete comments.
1995-02-26 01:37:51 +00:00
#include <machine/clock.h>
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#include <machine/ioctl_fd.h>
#include <sys/disklabel.h>
#include <sys/buf.h>
#include <sys/malloc.h>
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
#include <sys/proc.h>
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#include <sys/syslog.h>
Disabled half-baked disk statistics support. It didn't actually generate statistics, so it just wasted scarce disk table slots and screen space.
1996-12-18 17:44:31 +00:00
#ifdef notyet
isa.c isa_device.h: declare & define {e,}isa_{in,ex}ternalize(). fd.c: register devices and implement disk stats. wd.c: fix disk stats and call isa_externalize() as appropriate.
1994-10-19 00:08:07 +00:00
#include <sys/dkstat.h>
Disabled half-baked disk statistics support. It didn't actually generate statistics, so it just wasted scarce disk table slots and screen space.
1996-12-18 17:44:31 +00:00
#endif
Change all #includes to follow the current Berkeley style. Some of these ``changes'' are actually not changes at all, but CVS sometimes has trouble telling the difference. This also includes support for second-directory compiles. This is not quite complete yet, as `config' doesn't yet do the right thing. You can still make it work trivially, however, by doing the following: rm /sys/compile mkdir /usr/obj/sys/compile ln -s M-. /sys/compile cd /sys/i386/conf config MYKERNEL cd ../../compile/MYKERNEL ln -s /sys @ rm machine ln -s @/i386/include machine make depend make
1994-08-13 03:50:34 +00:00
#include <i386/isa/isa.h>
#include <i386/isa/isa_device.h>
#include <i386/isa/fdreg.h>
#include <i386/isa/fdc.h>
#include <i386/isa/rtc.h>
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
#include <machine/stdarg.h>
Moved the ft.c from 1.1.5.1 over. It works on my Conner thingie. Got rid of a ton of unused vars at the same time.
1994-09-25 06:04:25 +00:00
#if NFT > 0
#include <sys/ftape.h>
#include <i386/isa/ftreg.h>
#endif
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef DEVFS
devfs changes.. changes to allow devices that don't probe (e.g. /dev/mem) to create devfs entries this required giving 'configure' its own SYSINIT entry so we could duck in just before it with a DEVFS init and some device inits.. my devfs now looks like: ./misc ./misc/speaker ./misc/mem ./misc/kmem ./misc/null ./misc/zero ./misc/io ./misc/console ./misc/pcaudio ./misc/pcaudioctl ./disks ./disks/rfloppy ./disks/rfloppy/fd0.1440 ./disks/rfloppy/fd1.1200 ./disks/floppy ./disks/floppy/fd0.1440 ./disks/floppy/fd1.1200 also some sligt cleanups.. DEVFS needs a lot of work but I'm getting back to it..
1995-09-03 05:43:50 +00:00
#include <sys/devfsext.h>
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
#include <sys/device.h>
#include <dev/slice/slice.h>
#endif /* SLICE */
#endif /* DEVFS */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
/* misuse a flag to identify format operation */
#define B_FORMAT B_XXX
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Introduce a device flags value of 0x1 to always pretend a 1.44 MB floppy drive #0, regardless of what the CMOS says. This is intended as a bandaid for those plagued with Compaq's idea to not announce the floppy drive on their `Aero' notebook. Using the device flags is not very nice (in particular since they aren't per-drive but per-controller), but still looks a lot better to me than the disgusting guesswork hack that was recently posted to -hackers. Doc update will follow shortly.
1997-10-19 13:12:02 +00:00
/* configuration flags */
#define FDC_PRETEND_D0 (1 << 0) /* pretend drive 0 to be there */
/* internally used only, not really from CMOS: */
#define RTCFDT_144M_PRETENDED 0x1000
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/*
* this biotab field doubles as a field for the physical unit number
* on the controller
*/
#define id_physid id_scsiid
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
/* error returns for fd_cmd() */
#define FD_FAILED -1
#define FD_NOT_VALID -2
#define FDC_ERRMAX 100 /* do not log more */
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
#define NUMTYPES 14
#define NUMDENS (NUMTYPES - 6)
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/* These defines (-1) must match index for fd_types */
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#define F_TAPE_TYPE 0x020 /* bit for fd_types to indicate tape */
#define NO_TYPE 0 /* must match NO_TYPE in ft.c */
#define FD_1720 1
#define FD_1480 2
#define FD_1440 3
#define FD_1200 4
#define FD_820 5
#define FD_800 6
#define FD_720 7
#define FD_360 8
#define FD_1480in5_25 9
#define FD_1440in5_25 10
#define FD_820in5_25 11
#define FD_800in5_25 12
#define FD_720in5_25 13
#define FD_360in5_25 14
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
Staticize and cleanup.
1995-12-10 13:40:44 +00:00
static struct fd_type fd_types[NUMTYPES] =
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Use separate fields for format GAP and read/write GAP. Restore usage of read/write GAP.
1993-12-21 05:09:21 +00:00
{ 21,2,0xFF,0x04,82,3444,1,FDC_500KBPS,2,0x0C,2 }, /* 1.72M in HD 3.5in */
{ 18,2,0xFF,0x1B,82,2952,1,FDC_500KBPS,2,0x6C,1 }, /* 1.48M in HD 3.5in */
{ 18,2,0xFF,0x1B,80,2880,1,FDC_500KBPS,2,0x6C,1 }, /* 1.44M in HD 3.5in */
{ 15,2,0xFF,0x1B,80,2400,1,FDC_500KBPS,2,0x54,1 }, /* 1.2M in HD 5.25/3.5 */
{ 10,2,0xFF,0x10,82,1640,1,FDC_250KBPS,2,0x2E,1 }, /* 820K in HD 3.5in */
{ 10,2,0xFF,0x10,80,1600,1,FDC_250KBPS,2,0x2E,1 }, /* 800K in HD 3.5in */
{ 9,2,0xFF,0x20,80,1440,1,FDC_250KBPS,2,0x50,1 }, /* 720K in HD 3.5in */
360 DD entry speed fixed to 250KBPS
1994-03-02 18:34:41 +00:00
{ 9,2,0xFF,0x2A,40, 720,1,FDC_250KBPS,2,0x50,1 }, /* 360K in DD 5.25in */
Use separate fields for format GAP and read/write GAP. Restore usage of read/write GAP.
1993-12-21 05:09:21 +00:00
{ 18,2,0xFF,0x02,82,2952,1,FDC_500KBPS,2,0x02,2 }, /* 1.48M in HD 5.25in */
{ 18,2,0xFF,0x02,80,2880,1,FDC_500KBPS,2,0x02,2 }, /* 1.44M in HD 5.25in */
{ 10,2,0xFF,0x10,82,1640,1,FDC_300KBPS,2,0x2E,1 }, /* 820K in HD 5.25in */
{ 10,2,0xFF,0x10,80,1600,1,FDC_300KBPS,2,0x2E,1 }, /* 800K in HD 5.25in */
{ 9,2,0xFF,0x20,80,1440,1,FDC_300KBPS,2,0x50,1 }, /* 720K in HD 5.25in */
{ 9,2,0xFF,0x23,40, 720,2,FDC_300KBPS,2,0x50,1 }, /* 360K in HD 5.25in */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
};
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#define DRVS_PER_CTLR 2 /* 2 floppies */
Finally implement support for the `lsdev' program. The controller is now marked busy as long as it's being in non-reset state, and the drives are busy as long as at least one instance is open. Also reformat everything to fit into 80 columns again. Changed my mind wrt. error reporting for a write-protected drive and an open() with write intent; ENXIO has been too weird, now return EIO. Some portions of the code need to be rewritten to use tprintf() instead of simple printf()'s, so the messages will also appear on the session terminal, however.
1995-01-11 16:13:01 +00:00
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/***********************************************************************\
* Per controller structure. *
\***********************************************************************/
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
struct fdc_data fdc_data[NFDC];
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/***********************************************************************\
* Per drive structure. *
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
* N per controller (DRVS_PER_CTLR) *
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
\***********************************************************************/
Staticize and cleanup.
1995-12-10 13:40:44 +00:00
static struct fd_data {
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
struct fdc_data *fdc; /* pointer to controller structure */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
int fdsu; /* this units number on this controller */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
int type; /* Drive type (FD_1440...) */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
struct fd_type *ft; /* pointer to the type descriptor */
int flags;
#define FD_OPEN 0x01 /* it's open */
#define FD_ACTIVE 0x02 /* it's active */
#define FD_MOTOR 0x04 /* motor should be on */
#define FD_MOTOR_WAIT 0x08 /* motor coming up */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
int skip;
int hddrv;
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
#define FD_NO_TRACK -2
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
int track; /* where we think the head is */
int options; /* user configurable options, see ioctl_fd.h */
Disabled half-baked disk statistics support. It didn't actually generate statistics, so it just wasted scarce disk table slots and screen space.
1996-12-18 17:44:31 +00:00
#ifdef notyet
isa.c isa_device.h: declare & define {e,}isa_{in,ex}ternalize(). fd.c: register devices and implement disk stats. wd.c: fix disk stats and call isa_externalize() as appropriate.
1994-10-19 00:08:07 +00:00
int dkunit; /* disk stats unit number */
Disabled half-baked disk statistics support. It didn't actually generate statistics, so it just wasted scarce disk table slots and screen space.
1996-12-18 17:44:31 +00:00
#endif
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
struct callout_handle toffhandle;
struct callout_handle tohandle;
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
#ifdef DEVFS
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
int unit; /* as in fd0 */
void *bdevs[MAXPARTITIONS];
void *cdevs[MAXPARTITIONS];
struct subdev{
struct slice *slice;
int minor;
struct fd_data *drive;
struct slicelimits limit;
}subdevs[16];
struct intr_config_hook ich;
#else /* SLICE */
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
void *bdevs[1 + NUMDENS + MAXPARTITIONS];
void *cdevs[1 + NUMDENS + MAXPARTITIONS];
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif /* SLICE */
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
#endif
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
} fd_data[NFD];
/***********************************************************************\
* Throughout this file the following conventions will be used: *
* fd is a pointer to the fd_data struct for the drive in question *
* fdc is a pointer to the fdc_data struct for the controller *
* fdu is the floppy drive unit number *
* fdcu is the floppy controller unit number *
* fdsu is the floppy drive unit number on that controller. (sub-unit) *
\***********************************************************************/
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
#if NFT > 0
int ftopen(dev_t, int);
int ftintr(ftu_t ftu);
int ftclose(dev_t, int);
void ftstrategy(struct buf *);
int ftioctl(dev_t, int, caddr_t, int, struct proc *);
int ftdump(dev_t);
int ftsize(dev_t);
Correct recalibrate/seek code at attach time so that we do not get all the ``fdc0: ready for output in input'' messages when probing for ft devices. Submitted by: Steve Gerakines <steve2@genesis.tiac.net>
1995-04-06 07:20:16 +00:00
int ftattach(struct isa_device *, struct isa_device *, int);
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
#endif
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/* autoconfig functions */
static int fdprobe(struct isa_device *);
static int fdattach(struct isa_device *);
/* needed for ft driver, thus exported */
int in_fdc(fdcu_t);
int out_fdc(fdcu_t, int);
/* internal functions */
static void set_motor(fdcu_t, int, int);
# define TURNON 1
# define TURNOFF 0
static timeout_t fd_turnoff;
static timeout_t fd_motor_on;
static void fd_turnon(fdu_t);
static void fdc_reset(fdc_p);
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
1995-03-16 18:17:34 +00:00
static int fd_in(fdcu_t, int *);
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
static void fdstart(fdcu_t);
static timeout_t fd_timeout;
static timeout_t fd_pseudointr;
static int fdstate(fdcu_t, fdc_p);
Make everything compile with -Wtraditional. Make it easier to distribute a binary link-kit. Make all non-optional options (pagers, procfs) standard, and update LINT to reflect new symtab requirements. NB: -Wtraditional will henceforth be forgotten. This editing pass was primarily intended to detect any constructions where the old code might have been relying on traditional C semantics or syntax. These were all fixed, and the result of fixing some of them means that -Wall is now a realistic possibility within a few weeks.
1993-12-19 00:55:01 +00:00
static int retrier(fdcu_t);
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifndef SLICE
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
static int fdformat(dev_t, struct fd_formb *, struct proc *);
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
Enable the FIFO on enhanced floppy controllers. This reduces the number of dma overruns/underruns for systems under heavy dma load. As a side effect, broken enhanced floppy controllers that sometimes don't detect dma overruns/underruns will give less errors. Reviewed by: j@uriah.heep.sax.de (J Wunsch)
1997-09-17 20:16:17 +00:00
static int enable_fifo(fdc_p fdc);
static int fifo_threshold = 8; /* XXX: should be accessible via sysctl */
Make everything compile with -Wtraditional. Make it easier to distribute a binary link-kit. Make all non-optional options (pagers, procfs) standard, and update LINT to reflect new symtab requirements. NB: -Wtraditional will henceforth be forgotten. This editing pass was primarily intended to detect any constructions where the old code might have been relying on traditional C semantics or syntax. These were all fixed, and the result of fixing some of them means that -Wall is now a realistic possibility within a few weeks.
1993-12-19 00:55:01 +00:00
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
#define DEVIDLE 0
#define FINDWORK 1
#define DOSEEK 2
#define SEEKCOMPLETE 3
#define IOCOMPLETE 4
#define RECALCOMPLETE 5
#define STARTRECAL 6
#define RESETCTLR 7
#define SEEKWAIT 8
#define RECALWAIT 9
#define MOTORWAIT 10
#define IOTIMEDOUT 11
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#ifdef FDC_DEBUG
Staticized a few variables. Fixed warnings about unused variables.
1996-07-12 07:41:34 +00:00
static char const * const fdstates[] =
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
"DEVIDLE",
"FINDWORK",
"DOSEEK",
"SEEKCOMPLETE",
"IOCOMPLETE",
"RECALCOMPLETE",
"STARTRECAL",
"RESETCTLR",
"SEEKWAIT",
"RECALWAIT",
"MOTORWAIT",
"IOTIMEDOUT"
};
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/* CAUTION: fd_debug causes huge amounts of logging output */
Staticized a few variables. Fixed warnings about unused variables.
1996-07-12 07:41:34 +00:00
static int volatile fd_debug = 0;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
#define TRACE0(arg) if(fd_debug) printf(arg)
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
#define TRACE1(arg1, arg2) if(fd_debug) printf(arg1, arg2)
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#else /* FDC_DEBUG */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
#define TRACE0(arg)
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
#define TRACE1(arg1, arg2)
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#endif /* FDC_DEBUG */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Finally implement support for the `lsdev' program. The controller is now marked busy as long as it's being in non-reset state, and the drives are busy as long as at least one instance is open. Also reformat everything to fit into 80 columns again. Changed my mind wrt. error reporting for a write-protected drive and an open() with write intent; ENXIO has been too weird, now return EIO. Some portions of the code need to be rewritten to use tprintf() instead of simple printf()'s, so the messages will also appear on the session terminal, however.
1995-01-11 16:13:01 +00:00
/* autoconfig structure */
struct isa_driver fdcdriver = {
fdprobe, fdattach, "fdc",
};
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
static d_open_t Fdopen; /* NOTE, not fdopen */
static d_close_t fdclose;
static d_ioctl_t fdioctl;
static d_strategy_t fdstrategy;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
/* even if SLICE defined, these are needed for the ft support. */
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
#define CDEV_MAJOR 9
#define BDEV_MAJOR 2
Make a "DWIM" function for adding [bc]devsw entries for bdev drivers. Saves about 280 butes of source per driver, 56 bytes in object size and another 56 bytes moves from data to bss. No functional change intended nor expected. GENERIC should be about one k smaller now :-)
1996-07-23 21:52:43 +00:00
static struct cdevsw fd_cdevsw;
Julian forgot to make the *devsw structures static.
1995-12-08 23:23:00 +00:00
static struct bdevsw fd_bdevsw =
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
{ Fdopen, fdclose, fdstrategy, fdioctl, /*2*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
nodump, nopsize, D_DISK, "fd", &fd_cdevsw, -1 };
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
Staticize and cleanup.
1995-12-10 13:40:44 +00:00
static struct isa_device *fdcdevs[NFDC];
isa.c isa_device.h: declare & define {e,}isa_{in,ex}ternalize(). fd.c: register devices and implement disk stats. wd.c: fix disk stats and call isa_externalize() as appropriate.
1994-10-19 00:08:07 +00:00
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
static sl_h_IO_req_t fdsIOreq; /* IO req downward (to device) */
static sl_h_ioctl_t fdsioctl; /* ioctl req downward (to device) */
static sl_h_open_t fdsopen; /* downwards travelling open */
close() is no longer a SLICE method. Close is simply an open with no-read and no-write once internal to SLICE (it still exports a close to the rest of the kernel)
1998-04-22 10:25:27 +00:00
/*static sl_h_close_t fdsclose; */ /* downwards travelling close */
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
static void fdsinit(void *);
static struct slice_handler slicetype = {
"floppy",
0,
NULL,
0,
NULL, /* constructor */
&fdsIOreq,
&fdsioctl,
&fdsopen,
close() is no longer a SLICE method. Close is simply an open with no-read and no-write once internal to SLICE (it still exports a close to the rest of the kernel)
1998-04-22 10:25:27 +00:00
/*&fdsclose*/NULL,
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
NULL, /* revoke */
NULL, /* claim */
NULL, /* verify */
NULL /* upconfig */
};
#endif /* SLICE */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
static int
fdc_err(fdcu_t fdcu, const char *s)
{
fdc_data[fdcu].fdc_errs++;
Hide the "input/output timeout" messages behind the bootverbose case. This message has been confusing innocent ft users. It should go into 2.1 as well, it's a very simple fix.
1995-10-04 07:01:23 +00:00
if(s) {
if(fdc_data[fdcu].fdc_errs < FDC_ERRMAX)
printf("fdc%d: %s", fdcu, s);
else if(fdc_data[fdcu].fdc_errs == FDC_ERRMAX)
printf("fdc%d: too many errors, not logging any more\n",
fdcu);
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
return FD_FAILED;
}
/*
* fd_cmd: Send a command to the chip. Takes a varargs with this structure:
* Unit number,
* # of output bytes, output bytes as ints ...,
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
* # of input bytes, input bytes as ints ...
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
*/
Staticize and cleanup.
1995-12-10 13:40:44 +00:00
static int
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fd_cmd(fdcu_t fdcu, int n_out, ...)
{
u_char cmd;
int n_in;
int n;
va_list ap;
va_start(ap, n_out);
cmd = (u_char)(va_arg(ap, int));
va_end(ap);
va_start(ap, n_out);
for (n = 0; n < n_out; n++)
{
if (out_fdc(fdcu, va_arg(ap, int)) < 0)
{
char msg[50];
sprintf(msg,
"cmd %x failed at out byte %d of %d\n",
cmd, n + 1, n_out);
return fdc_err(fdcu, msg);
}
}
n_in = va_arg(ap, int);
for (n = 0; n < n_in; n++)
{
int *ptr = va_arg(ap, int *);
if (fd_in(fdcu, ptr) < 0)
{
char msg[50];
sprintf(msg,
"cmd %02x failed at in byte %d of %d\n",
cmd, n + 1, n_in);
return fdc_err(fdcu, msg);
}
}
return 0;
}
Enable the FIFO on enhanced floppy controllers. This reduces the number of dma overruns/underruns for systems under heavy dma load. As a side effect, broken enhanced floppy controllers that sometimes don't detect dma overruns/underruns will give less errors. Reviewed by: j@uriah.heep.sax.de (J Wunsch)
1997-09-17 20:16:17 +00:00
static int
enable_fifo(fdc_p fdc)
{
int i, j;
if ((fdc->flags & FDC_HAS_FIFO) == 0) {
/*
* XXX:
* Cannot use fd_cmd the normal way here, since
* this might be an invalid command. Thus we send the
* first byte, and check for an early turn of data directon.
*/
if (out_fdc(fdc->fdcu, I8207X_CONFIGURE) < 0)
return fdc_err(fdc->fdcu, "Enable FIFO failed\n");
/* If command is invalid, return */
j = 100000;
while ((i = inb(fdc->baseport + FDSTS) & (NE7_DIO | NE7_RQM))
!= NE7_RQM && j-- > 0)
if (i == (NE7_DIO | NE7_RQM)) {
fdc_reset(fdc);
return FD_FAILED;
}
if (j<0 ||
fd_cmd(fdc->fdcu, 3,
0, (fifo_threshold - 1) & 0xf, 0, 0) < 0) {
fdc_reset(fdc);
return fdc_err(fdc->fdcu, "Enable FIFO failed\n");
}
fdc->flags |= FDC_HAS_FIFO;
return 0;
}
if (fd_cmd(fdc->fdcu, 4,
I8207X_CONFIGURE, 0, (fifo_threshold - 1) & 0xf, 0, 0) < 0)
return fdc_err(fdc->fdcu, "Re-enable FIFO failed\n");
return 0;
}
Staticize and cleanup.
1995-12-10 13:40:44 +00:00
static int
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fd_sense_drive_status(fdc_p fdc, int *st3p)
{
int st3;
if (fd_cmd(fdc->fdcu, 2, NE7CMD_SENSED, fdc->fdu, 1, &st3))
{
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
return fdc_err(fdc->fdcu, "Sense Drive Status failed\n");
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
}
if (st3p)
*st3p = st3;
return 0;
}
Staticize and cleanup.
1995-12-10 13:40:44 +00:00
static int
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fd_sense_int(fdc_p fdc, int *st0p, int *cylp)
{
int st0, cyl;
int ret = fd_cmd(fdc->fdcu, 1, NE7CMD_SENSEI, 1, &st0);
if (ret)
{
(void)fdc_err(fdc->fdcu,
"sense intr err reading stat reg 0\n");
return ret;
}
if (st0p)
*st0p = st0;
if ((st0 & NE7_ST0_IC) == NE7_ST0_IC_IV)
{
/*
* There doesn't seem to have been an interrupt.
*/
return FD_NOT_VALID;
}
if (fd_in(fdc->fdcu, &cyl) < 0)
{
return fdc_err(fdc->fdcu, "can't get cyl num\n");
}
if (cylp)
*cylp = cyl;
return 0;
}
Staticize and cleanup.
1995-12-10 13:40:44 +00:00
static int
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fd_read_status(fdc_p fdc, int fdsu)
{
int i, ret;
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
1995-03-16 18:17:34 +00:00
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
for (i = 0; i < 7; i++)
{
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
1995-03-16 18:17:34 +00:00
/*
* XXX types are poorly chosen. Only bytes can by read
* from the hardware, but fdc_status wants u_longs and
* fd_in() gives ints.
*/
int status;
ret = fd_in(fdc->fdcu, &status);
fdc->status[i] = status;
if (ret != 0)
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
break;
}
if (ret == 0)
fdc->flags |= FDC_STAT_VALID;
else
fdc->flags &= ~FDC_STAT_VALID;
return ret;
}
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/****************************************************************************/
/* autoconfiguration stuff */
/****************************************************************************/
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/*
* probe for existance of controller
*/
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
static int
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fdprobe(struct isa_device *dev)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
fdcu_t fdcu = dev->id_unit;
if(fdc_data[fdcu].flags & FDC_ATTACHED)
{
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("fdc%d: unit used multiple times\n", fdcu);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return 0;
}
isa.c isa_device.h: declare & define {e,}isa_{in,ex}ternalize(). fd.c: register devices and implement disk stats. wd.c: fix disk stats and call isa_externalize() as appropriate.
1994-10-19 00:08:07 +00:00
fdcdevs[fdcu] = dev;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc_data[fdcu].baseport = dev->id_iobase;
Reset fdc during probe. From: <dec@lazarus.nrtc.northrop.com> Changes between EPSILON and RELEASE of FreeBSD have again caused the kernel to not see my floppy disk drives. I don't know what happened, 'cause I don't see any changes to fd.c, but here is an old fix that I have applied to the probe routine which will solve the problem (at least for me). Since this is a rather brute-force solution - I understand if you want to ignore it... [Upgrading to pre-Beta FreeBSD caused this on my system. -AM]
1993-12-03 05:01:40 +00:00
/* First - lets reset the floppy controller */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
outb(dev->id_iobase+FDOUT, 0);
Reset fdc during probe. From: <dec@lazarus.nrtc.northrop.com> Changes between EPSILON and RELEASE of FreeBSD have again caused the kernel to not see my floppy disk drives. I don't know what happened, 'cause I don't see any changes to fd.c, but here is an old fix that I have applied to the probe routine which will solve the problem (at least for me). Since this is a rather brute-force solution - I understand if you want to ignore it... [Upgrading to pre-Beta FreeBSD caused this on my system. -AM]
1993-12-03 05:01:40 +00:00
DELAY(100);
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
outb(dev->id_iobase+FDOUT, FDO_FRST);
Reset fdc during probe. From: <dec@lazarus.nrtc.northrop.com> Changes between EPSILON and RELEASE of FreeBSD have again caused the kernel to not see my floppy disk drives. I don't know what happened, 'cause I don't see any changes to fd.c, but here is an old fix that I have applied to the probe routine which will solve the problem (at least for me). Since this is a rather brute-force solution - I understand if you want to ignore it... [Upgrading to pre-Beta FreeBSD caused this on my system. -AM]
1993-12-03 05:01:40 +00:00
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/* see if it can handle a command */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (fd_cmd(fdcu,
3, NE7CMD_SPECIFY, NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
0))
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
return(0);
}
return (IO_FDCSIZE);
}
/*
* wire controller into system, look for floppy units
*/
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
static int
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fdattach(struct isa_device *dev)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
unsigned fdt;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdu_t fdu;
fdcu_t fdcu = dev->id_unit;
fdc_p fdc = fdc_data + fdcu;
fd_p fd;
Staticized a few variables. Fixed warnings about unused variables.
1996-07-12 07:41:34 +00:00
int fdsu, st0, st3, i;
#if NFT > 0
int unithasfd;
#endif
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
struct isa_device *fdup;
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
int ic_type = 0;
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
#ifdef DEVFS
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
char namebuf[64];
#else
First attempt at creating devfs entries for sliced devices. Doesn't quite work yet, so the heart of it is disabled. Added bdev and cdev args to dsopen(). drivers: Fixed device names, links, minor numbers and modes. wd.c: Started actually supporting devfs. diskslice.h: Added devfs tokens to structs (currently 576 of them per disk! :-(). subr_diskslice.c: Create devfs entries in dsopen() and (unsuccessfully) attempt to make them go away at the right times. DEVFS is #undefed at the start so that this shouldn't cause problems.
1996-01-27 04:18:15 +00:00
int mynor;
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
int typemynor;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif /* SLICE */
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
int typesize;
#endif
isa.c isa_device.h: declare & define {e,}isa_{in,ex}ternalize(). fd.c: register devices and implement disk stats. wd.c: fix disk stats and call isa_externalize() as appropriate.
1994-10-19 00:08:07 +00:00
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->fdcu = fdcu;
fdc->flags |= FDC_ATTACHED;
fdc->dmachan = dev->id_drq;
Update drivers to use isa_dma_acquire() and isa_dma_release() Reviewed by: bde
1996-04-08 19:40:57 +00:00
/* Acquire the DMA channel forever, The driver will do the rest */
isa_dma_acquire(fdc->dmachan);
Allocate DMA bounce buffers only when requested by drivers. Only the fd and wt drivers need bounce buffers, so this normally saves 32K-1K of kernel memory. Keep track of which DMA channels are busy. isa_dmadone() must now be called when DMA has finished or been aborted. Panic for unallocated and too-small (required) bounce buffers. fd.c: There will be new warnings about isa_dmadone() not being called after DMA has been aborted. sound/dmabuf.c: isa_dmadone() needs more parameters than are available, so temporarily use a new interface isa_dmadone_nobounce() to avoid having to worry about panics for fake parameters. Untested.
1996-01-27 02:33:48 +00:00
isa_dmainit(fdc->dmachan, 128 << 3 /* XXX max secsize */);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->state = DEVIDLE;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/* reset controller, turn motor off, clear fdout mirror reg */
outb(fdc->baseport + FDOUT, ((fdc->fdout = 0)));
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
bufq_init(&fdc->head);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/* check for each floppy drive */
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
for (fdup = isa_biotab_fdc; fdup->id_driver != 0; fdup++) {
if (fdup->id_iobase != dev->id_iobase)
continue;
fdu = fdup->id_unit;
fd = &fd_data[fdu];
if (fdu >= (NFD+NFT))
continue;
fdsu = fdup->id_physid;
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
/* look up what bios thinks we have */
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
switch (fdu) {
Introduce a device flags value of 0x1 to always pretend a 1.44 MB floppy drive #0, regardless of what the CMOS says. This is intended as a bandaid for those plagued with Compaq's idea to not announce the floppy drive on their `Aero' notebook. Using the device flags is not very nice (in particular since they aren't per-drive but per-controller), but still looks a lot better to me than the disgusting guesswork hack that was recently posted to -hackers. Doc update will follow shortly.
1997-10-19 13:12:02 +00:00
case 0: if (dev->id_flags & FDC_PRETEND_D0)
fdt = RTCFDT_144M | RTCFDT_144M_PRETENDED;
else
fdt = (rtcin(RTC_FDISKETTE) & 0xf0);
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
break;
case 1: fdt = ((rtcin(RTC_FDISKETTE) << 4) & 0xf0);
break;
default: fdt = RTCFDT_NONE;
break;
}
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/* is there a unit? */
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
if ((fdt == RTCFDT_NONE)
#if NFT > 0
Finally implement support for the `lsdev' program. The controller is now marked busy as long as it's being in non-reset state, and the drives are busy as long as at least one instance is open. Also reformat everything to fit into 80 columns again. Changed my mind wrt. error reporting for a write-protected drive and an open() with write intent; ENXIO has been too weird, now return EIO. Some portions of the code need to be rewritten to use tprintf() instead of simple printf()'s, so the messages will also appear on the session terminal, however.
1995-01-11 16:13:01 +00:00
|| (fdsu >= DRVS_PER_CTLR)) {
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#else
) {
floppy tape support shouldn't interfere with floppy disk driver on systems with no floppy tape drive (patch from Jim Babb).
1994-03-02 08:10:42 +00:00
fd->type = NO_TYPE;
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#endif
#if NFT > 0
Reverse the meaning of previous change. Now floppy tape support is *disabled* unless you specifically request otherwise. Poul wanted it this way, and I guess I'm not going to argue though it may seem counter-intuitive. We can always change it back, later.
1994-11-30 12:04:28 +00:00
/* If BIOS says no floppy, or > 2nd device */
/* Probe for and attach a floppy tape. */
Correct recalibrate/seek code at attach time so that we do not get all the ``fdc0: ready for output in input'' messages when probing for ft devices. Submitted by: Steve Gerakines <steve2@genesis.tiac.net>
1995-04-06 07:20:16 +00:00
/* Tell FT if there was already a disk */
/* with this unit number found. */
unithasfd = 0;
if (fdu < NFD && fd->type != NO_TYPE)
unithasfd = 1;
Restructured the floppy tape probe. The ``flags 1'' in the fdc line is now only needed for owners of an Insight tape (perhaps there aren't any? Mine is disfunctional). All other probes are safe wrt. to the motor-control line of floppy disk drives. Document the flag in LINT finally.
1995-05-06 19:34:28 +00:00
if (ftattach(dev, fdup, unithasfd))
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
continue;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
if (fdsu < DRVS_PER_CTLR)
floppy tape support shouldn't interfere with floppy disk driver on systems with no floppy tape drive (patch from Jim Babb).
1994-03-02 08:10:42 +00:00
fd->type = NO_TYPE;
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#endif
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
continue;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
}
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/* select it */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
set_motor(fdcu, fdsu, TURNON);
Fixed the problem where the floppy has incorrectly failed probing when the drive had been left on a cylinder > 67 after kernel boot. The most common case for this is booting a kernel that is located on the inner cylinders of a floppy. Also removed all occurences of spinwait(), replaced by DELAY. Nuked a return line saying nothing, this might make Bruce happy 8^) Submitted by: partially by Bruce Evans
1994-09-17 18:08:36 +00:00
DELAY(1000000); /* 1 sec */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (ic_type == 0 &&
fd_cmd(fdcu, 1, NE7CMD_VERSION, 1, &ic_type) == 0)
{
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#ifdef FDC_PRINT_BOGUS_CHIPTYPE
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("fdc%d: ", fdcu);
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#endif
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
ic_type = (u_char)ic_type;
switch( ic_type ) {
case 0x80:
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#ifdef FDC_PRINT_BOGUS_CHIPTYPE
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("NEC 765\n");
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#endif
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fdc->fdct = FDC_NE765;
break;
case 0x81:
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#ifdef FDC_PRINT_BOGUS_CHIPTYPE
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("Intel 82077\n");
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#endif
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fdc->fdct = FDC_I82077;
break;
case 0x90:
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#ifdef FDC_PRINT_BOGUS_CHIPTYPE
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("NEC 72065B\n");
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#endif
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fdc->fdct = FDC_NE72065;
break;
default:
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#ifdef FDC_PRINT_BOGUS_CHIPTYPE
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("unknown IC type %02x\n", ic_type);
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#endif
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fdc->fdct = FDC_UNKNOWN;
break;
}
Enable the FIFO on enhanced floppy controllers. This reduces the number of dma overruns/underruns for systems under heavy dma load. As a side effect, broken enhanced floppy controllers that sometimes don't detect dma overruns/underruns will give less errors. Reviewed by: j@uriah.heep.sax.de (J Wunsch)
1997-09-17 20:16:17 +00:00
if (fdc->fdct != FDC_NE765 &&
fdc->fdct != FDC_UNKNOWN &&
enable_fifo(fdc) == 0) {
printf("fdc%d: FIFO enabled", fdcu);
printf(", %d bytes threshold\n",
fifo_threshold);
}
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
}
if ((fd_cmd(fdcu, 2, NE7CMD_SENSED, fdsu, 1, &st3) == 0) &&
(st3 & NE7_ST3_T0)) {
Fixed the problem where the floppy has incorrectly failed probing when the drive had been left on a cylinder > 67 after kernel boot. The most common case for this is booting a kernel that is located on the inner cylinders of a floppy. Also removed all occurences of spinwait(), replaced by DELAY. Nuked a return line saying nothing, this might make Bruce happy 8^) Submitted by: partially by Bruce Evans
1994-09-17 18:08:36 +00:00
/* if at track 0, first seek inwards */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
/* seek some steps: */
(void)fd_cmd(fdcu, 3, NE7CMD_SEEK, fdsu, 10, 0);
Fixed the problem where the floppy has incorrectly failed probing when the drive had been left on a cylinder > 67 after kernel boot. The most common case for this is booting a kernel that is located on the inner cylinders of a floppy. Also removed all occurences of spinwait(), replaced by DELAY. Nuked a return line saying nothing, this might make Bruce happy 8^) Submitted by: partially by Bruce Evans
1994-09-17 18:08:36 +00:00
DELAY(300000); /* ...wait a moment... */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
(void)fd_sense_int(fdc, 0, 0); /* make ctrlr happy */
}
/* If we're at track 0 first seek inwards. */
if ((fd_sense_drive_status(fdc, &st3) == 0) &&
(st3 & NE7_ST3_T0)) {
/* Seek some steps... */
if (fd_cmd(fdcu, 3, NE7CMD_SEEK, fdsu, 10, 0) == 0) {
/* ...wait a moment... */
DELAY(300000);
/* make ctrlr happy: */
(void)fd_sense_int(fdc, 0, 0);
}
Fixed the problem where the floppy has incorrectly failed probing when the drive had been left on a cylinder > 67 after kernel boot. The most common case for this is booting a kernel that is located on the inner cylinders of a floppy. Also removed all occurences of spinwait(), replaced by DELAY. Nuked a return line saying nothing, this might make Bruce happy 8^) Submitted by: partially by Bruce Evans
1994-09-17 18:08:36 +00:00
}
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
Fixed the problem where the floppy has incorrectly failed probing when the drive had been left on a cylinder > 67 after kernel boot. The most common case for this is booting a kernel that is located on the inner cylinders of a floppy. Also removed all occurences of spinwait(), replaced by DELAY. Nuked a return line saying nothing, this might make Bruce happy 8^) Submitted by: partially by Bruce Evans
1994-09-17 18:08:36 +00:00
for(i = 0; i < 2; i++) {
/*
* we must recalibrate twice, just in case the
* heads have been beyond cylinder 76, since most
* FDCs still barf when attempting to recalibrate
* more than 77 steps
*/
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
/* go back to 0: */
if (fd_cmd(fdcu, 2, NE7CMD_RECAL, fdsu, 0) == 0) {
/* a second being enough for full stroke seek*/
DELAY(i == 0? 1000000: 300000);
/* anything responding? */
if (fd_sense_int(fdc, &st0, 0) == 0 &&
(st0 & NE7_ST0_EC) == 0)
break; /* already probed succesfully */
}
Fixed the problem where the floppy has incorrectly failed probing when the drive had been left on a cylinder > 67 after kernel boot. The most common case for this is booting a kernel that is located on the inner cylinders of a floppy. Also removed all occurences of spinwait(), replaced by DELAY. Nuked a return line saying nothing, this might make Bruce happy 8^) Submitted by: partially by Bruce Evans
1994-09-17 18:08:36 +00:00
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
set_motor(fdcu, fdsu, TURNOFF);
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if (st0 & NE7_ST0_EC) /* no track 0 -> no drive present */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
continue;
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fd->track = FD_NO_TRACK;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
fd->unit = fdu;
#endif
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
fd->fdc = fdc;
fd->fdsu = fdsu;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fd->options = 0;
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
callout_handle_init(&fd->toffhandle);
callout_handle_init(&fd->tohandle);
Fix -Wformat warnings, still need to do something about %b and pointer type args.
1995-05-09 12:26:00 +00:00
printf("fd%d: ", fdu);
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
switch (fdt) {
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
case RTCFDT_12M:
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("1.2MB 5.25in\n");
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
fd->type = FD_1200;
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
break;
Introduce a device flags value of 0x1 to always pretend a 1.44 MB floppy drive #0, regardless of what the CMOS says. This is intended as a bandaid for those plagued with Compaq's idea to not announce the floppy drive on their `Aero' notebook. Using the device flags is not very nice (in particular since they aren't per-drive but per-controller), but still looks a lot better to me than the disgusting guesswork hack that was recently posted to -hackers. Doc update will follow shortly.
1997-10-19 13:12:02 +00:00
case RTCFDT_144M | RTCFDT_144M_PRETENDED:
printf("config-pretended ");
fdt = RTCFDT_144M;
/* fallthrough */
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
case RTCFDT_144M:
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("1.44MB 3.5in\n");
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
fd->type = FD_1440;
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
break;
Here is a minor patch for FreeBSD 2.0R to allow it to recognize 2.88MB floppy drives. All it does is set the type to 1.44MB if it finds the 2.88MB drive. Submitted by: Andrew Gillham <gillham@andrews.edu>
1994-12-04 20:22:20 +00:00
case RTCFDT_288M:
BIOS manufacturers don't seem to have a unique idea about 2.88 MB floppy drive types in the CMOS; add 0x50 as an alias for 2.88 MB.
1995-10-09 15:00:39 +00:00
case RTCFDT_288M_1:
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("2.88MB 3.5in - 1.44MB mode\n");
Here is a minor patch for FreeBSD 2.0R to allow it to recognize 2.88MB floppy drives. All it does is set the type to 1.44MB if it finds the 2.88MB drive. Submitted by: Andrew Gillham <gillham@andrews.edu>
1994-12-04 20:22:20 +00:00
fd->type = FD_1440;
break;
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
case RTCFDT_360K:
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("360KB 5.25in\n");
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
fd->type = FD_360;
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
break;
Reorganization of format table. GAP values changed suitable for possible format code addition. Read/write GAP always 2 now. Interleave parameter added for possible format code addition. Many logical formats added. 720K physical drive added. Problems: still can't read 720..820 media in 1.44 drive.
1993-12-18 01:16:26 +00:00
case RTCFDT_720K:
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("720KB 3.5in\n");
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
fd->type = FD_720;
Reorganization of format table. GAP values changed suitable for possible format code addition. Read/write GAP always 2 now. Interleave parameter added for possible format code addition. Many logical formats added. 720K physical drive added. Problems: still can't read 720..820 media in 1.44 drive.
1993-12-18 01:16:26 +00:00
break;
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
default:
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("unknown\n");
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
fd->type = NO_TYPE;
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
continue;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Reviewed by: no-one yet, but non-intrusive Submitted by: julian@tfs.com Obtained from: written from scratch slight changes to make space for devfs.. (also conditional test code in i386/isa/fd.c) =================================================================== RCS file: /home/ncvs/src/sys/sys/malloc.h,v retrieving revision 1.7 diff -r1.7 malloc.h 113a114,117 > #define M_DEVFSMNT 62 /* DEVFS mount structure */ > #define M_DEVFSBACK 63 /* DEVFS Back node */ > #define M_DEVFSFRONT 64 /* DEVFS Front node */ > #define M_DEVFSNODE 65 /* DEVFS node */ 184c188,192 < NULL, NULL, NULL, NULL, NULL, \ --- > "DEVFS mount", /* 62 M_DEVFSMNT */ \ > "DEVFS back", /* 63 M_DEVFSBACK */ \ > "DEVFS front", /* 64 M_DEVFSFRONT */ \ > "DEVFS node", /* 65 M_DEVFSNODE */ \ > NULL, \ Index: sys/mount.h =================================================================== RCS file: /home/ncvs/src/sys/sys/mount.h,v retrieving revision 1.16 diff -r1.16 mount.h 100c100,101 < #define MOUNT_MAXTYPE 15 --- > #define MOUNT_DEVFS 16 /* existing device Filesystem */ > #define MOUNT_MAXTYPE 16 118a120 > "devfs", /* 15 MOUNT_DEVFS */ \ Index: sys/vnode.h =================================================================== RCS file: /home/ncvs/src/sys/sys/vnode.h,v retrieving revision 1.19 diff -r1.19 vnode.h 61c61 < VT_UNION, VT_MSDOSFS --- > VT_UNION, VT_MSDOSFS, VT_DEVFS
1995-04-20 03:18:19 +00:00
#ifdef DEVFS
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
sprintf(namebuf,"fd%d",fdu);
fd->subdevs[0].minor = 0;
fd->subdevs[0].drive = fd;
fd->subdevs[0].limit.blksize =
128 << (fd_types[fd->type - 1].secsize);
fd->subdevs[0].limit.slicesize =
fd_types[fd->type - 1].size
* fd->subdevs[0].limit.blksize;
fd->ft = fd_types + (fd->type - 1); /* default value */
sl_make_slice(&slicetype,
&fd->subdevs[0],
&fd->subdevs[0].limit,
&fd->subdevs[0].slice,
NULL,
namebuf);
/* Allow full probing */
fd->subdevs[0].slice->probeinfo.typespecific = NULL;
fd->subdevs[0].slice->probeinfo.type = NULL;
fd->ich.ich_func = fdsinit;
fd->ich.ich_arg = &fd->subdevs[0];
config_intrhook_establish(&fd->ich);
#else /* SLICE */
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
mynor = fdu << 6;
fd->bdevs[0] = devfs_add_devswf(&fd_bdevsw, mynor, DV_BLK,
UID_ROOT, GID_OPERATOR, 0640,
"fd%d", fdu);
fd->cdevs[0] = devfs_add_devswf(&fd_cdevsw, mynor, DV_CHR,
UID_ROOT, GID_OPERATOR, 0640,
"rfd%d", fdu);
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif /* SLICE */
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
for (i = 1; i < 1 + NUMDENS; i++) {
/*
* XXX this and the lookup in Fdopen() should be
* data driven.
*/
switch (fd->type) {
case FD_360:
if (i != FD_360)
continue;
break;
case FD_720:
if (i != FD_720 && i != FD_800 && i != FD_820)
continue;
break;
case FD_1200:
if (i != FD_360 && i != FD_720 && i != FD_800
&& i != FD_820 && i != FD_1200
&& i != FD_1440 && i != FD_1480)
continue;
break;
case FD_1440:
if (i != FD_720 && i != FD_800 && i != FD_820
&& i != FD_1200 && i != FD_1440
&& i != FD_1480 && i != FD_1720)
continue;
break;
}
typesize = fd_types[i - 1].size / 2;
/*
* XXX all these conversions give bloated code and
* confusing names.
*/
if (typesize == 1476)
typesize = 1480;
if (typesize == 1722)
typesize = 1720;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
sprintf(namebuf,"fd%d.%d",fdu,typesize);
fd->subdevs[i].minor = i;
fd->subdevs[i].drive = fd;
fd->subdevs[i].limit.blksize =
128 << (fd_types[i - 1].secsize);
fd->subdevs[i].limit.slicesize =
fd_types[i - 1].size
* fd->subdevs[i].limit.blksize;
sl_make_slice(&slicetype,
&fd->subdevs[i],
&fd->subdevs[i].limit,
&fd->subdevs[i].slice,
NULL,
namebuf);
/* Allow full probing */
fd->subdevs[i].slice->probeinfo.typespecific = NULL;
fd->subdevs[i].slice->probeinfo.type = NO_SUBPART;
}
#else /* SLICE */
typemynor = mynor | i;
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
fd->bdevs[i] =
devfs_add_devswf(&fd_bdevsw, typemynor, DV_BLK,
UID_ROOT, GID_OPERATOR, 0640,
"fd%d.%d", fdu, typesize);
fd->cdevs[i] =
devfs_add_devswf(&fd_cdevsw, typemynor, DV_CHR,
UID_ROOT, GID_OPERATOR, 0640,
"rfd%d.%d", fdu, typesize);
}
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
for (i = 0; i < MAXPARTITIONS; i++) {
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
fd->bdevs[1 + NUMDENS + i] = devfs_link(fd->bdevs[0],
Fixed devfs device names and numbers. Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
"fd%d%c", fdu, 'a' + i);
fd->cdevs[1 + NUMDENS + i] =
devfs_link(fd->cdevs[0],
"rfd%d%c", fdu, 'a' + i);
}
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif /* SLICE */
Reviewed by: no-one yet, but non-intrusive Submitted by: julian@tfs.com Obtained from: written from scratch slight changes to make space for devfs.. (also conditional test code in i386/isa/fd.c) =================================================================== RCS file: /home/ncvs/src/sys/sys/malloc.h,v retrieving revision 1.7 diff -r1.7 malloc.h 113a114,117 > #define M_DEVFSMNT 62 /* DEVFS mount structure */ > #define M_DEVFSBACK 63 /* DEVFS Back node */ > #define M_DEVFSFRONT 64 /* DEVFS Front node */ > #define M_DEVFSNODE 65 /* DEVFS node */ 184c188,192 < NULL, NULL, NULL, NULL, NULL, \ --- > "DEVFS mount", /* 62 M_DEVFSMNT */ \ > "DEVFS back", /* 63 M_DEVFSBACK */ \ > "DEVFS front", /* 64 M_DEVFSFRONT */ \ > "DEVFS node", /* 65 M_DEVFSNODE */ \ > NULL, \ Index: sys/mount.h =================================================================== RCS file: /home/ncvs/src/sys/sys/mount.h,v retrieving revision 1.16 diff -r1.16 mount.h 100c100,101 < #define MOUNT_MAXTYPE 15 --- > #define MOUNT_DEVFS 16 /* existing device Filesystem */ > #define MOUNT_MAXTYPE 16 118a120 > "devfs", /* 15 MOUNT_DEVFS */ \ Index: sys/vnode.h =================================================================== RCS file: /home/ncvs/src/sys/sys/vnode.h,v retrieving revision 1.19 diff -r1.19 vnode.h 61c61 < VT_UNION, VT_MSDOSFS --- > VT_UNION, VT_MSDOSFS, VT_DEVFS
1995-04-20 03:18:19 +00:00
#endif /* DEVFS */
Disabled half-baked disk statistics support. It didn't actually generate statistics, so it just wasted scarce disk table slots and screen space.
1996-12-18 17:44:31 +00:00
#ifdef notyet
Declare all the args of Fdopen() and fdclose(). Initialize dk_wpms[] less bogusly. Clean up includes. Remove some obsolete comments.
1995-02-26 01:37:51 +00:00
if (dk_ndrive < DK_NDRIVE) {
isa.c isa_device.h: declare & define {e,}isa_{in,ex}ternalize(). fd.c: register devices and implement disk stats. wd.c: fix disk stats and call isa_externalize() as appropriate.
1994-10-19 00:08:07 +00:00
sprintf(dk_names[dk_ndrive], "fd%d", fdu);
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
fd->dkunit = dk_ndrive++;
Declare all the args of Fdopen() and fdclose(). Initialize dk_wpms[] less bogusly. Clean up includes. Remove some obsolete comments.
1995-02-26 01:37:51 +00:00
/*
* XXX assume rate is FDC_500KBPS.
*/
dk_wpms[dk_ndrive] = 500000 / 8 / 2;
isa.c isa_device.h: declare & define {e,}isa_{in,ex}ternalize(). fd.c: register devices and implement disk stats. wd.c: fix disk stats and call isa_externalize() as appropriate.
1994-10-19 00:08:07 +00:00
} else {
fd->dkunit = -1;
}
Disabled half-baked disk statistics support. It didn't actually generate statistics, so it just wasted scarce disk table slots and screen space.
1996-12-18 17:44:31 +00:00
#endif
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
return (1);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
static void
fdsinit(void *arg)
{
struct subdev *sd = arg;
sh_p tp;
if ((tp = slice_probeall(sd->slice)) != NULL) {
(*tp->constructor)(sd->slice);
}
config_intrhook_disestablish(&sd->drive->ich);
}
#endif /* SLICE */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/****************************************************************************/
/* motor control stuff */
Back out Joerg's latest commit. Sorry, Joerg, but this breaks the install floppies now. I'm not sure why, but things hang when it gets to the `changing root to fd0c' part. Without your latest commit, everything works fine. Maybe you can figure out what you broke after ALPHA! :)
1994-11-02 09:08:40 +00:00
/* remember to not deselect the drive we're working on */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/****************************************************************************/
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
static void
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
set_motor(fdcu_t fdcu, int fdsu, int turnon)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
int fdout = fdc_data[fdcu].fdout;
int needspecify = 0;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if(turnon) {
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
fdout &= ~FDO_FDSEL;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdout |= (FDO_MOEN0 << fdsu) + fdsu;
} else
fdout &= ~(FDO_MOEN0 << fdsu);
Back out Joerg's latest commit. Sorry, Joerg, but this breaks the install floppies now. I'm not sure why, but things hang when it gets to the `changing root to fd0c' part. Without your latest commit, everything works fine. Maybe you can figure out what you broke after ALPHA! :)
1994-11-02 09:08:40 +00:00
if(!turnon
&& (fdout & (FDO_MOEN0+FDO_MOEN1+FDO_MOEN2+FDO_MOEN3)) == 0)
/* gonna turn off the last drive, put FDC to bed */
fdout &= ~ (FDO_FRST|FDO_FDMAEN);
else {
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/* make sure controller is selected and specified */
if((fdout & (FDO_FRST|FDO_FDMAEN)) == 0)
needspecify = 1;
fdout |= (FDO_FRST|FDO_FDMAEN);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
outb(fdc_data[fdcu].baseport+FDOUT, fdout);
fdc_data[fdcu].fdout = fdout;
TRACE1("[0x%x->FDOUT]", fdout);
if(needspecify) {
Checking for timeout at several critical calls to ``out_fdc()'' now, so i hope i've finally removed all the occasions where the driver got stuck when there's no floppy in the drive. Also attemmpting to omit the error mesage for ``recalib failed'' for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
/*
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
* XXX
Checking for timeout at several critical calls to ``out_fdc()'' now, so i hope i've finally removed all the occasions where the driver got stuck when there's no floppy in the drive. Also attemmpting to omit the error mesage for ``recalib failed'' for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
* special case: since we have just woken up the FDC
* from its sleep, we silently assume the command will
* be accepted, and do not test for a timeout
*/
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
(void)fd_cmd(fdcu, 3, NE7CMD_SPECIFY,
NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
0);
Enable the FIFO on enhanced floppy controllers. This reduces the number of dma overruns/underruns for systems under heavy dma load. As a side effect, broken enhanced floppy controllers that sometimes don't detect dma overruns/underruns will give less errors. Reviewed by: j@uriah.heep.sax.de (J Wunsch)
1997-09-17 20:16:17 +00:00
if (fdc_data[fdcu].flags & FDC_HAS_FIFO)
(void) enable_fifo(&fdc_data[fdcu]);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
}
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
static void
Ran ft.c through ident. Added a missing #ifdef INET wrapper in lpt.c Main change: Removed the timeout_func_t casts from timeout calls and correctly defined the timeout routines to conform to the new format. lpt.c doesn't have this change. Reviewed by: Submitted by:
1994-08-23 07:52:29 +00:00
fd_turnoff(void *arg1)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
fdu_t fdu = (fdu_t)arg1;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
int s;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fd_p fd = fd_data + fdu;
Finally implement support for the `lsdev' program. The controller is now marked busy as long as it's being in non-reset state, and the drives are busy as long as at least one instance is open. Also reformat everything to fit into 80 columns again. Changed my mind wrt. error reporting for a write-protected drive and an open() with write intent; ENXIO has been too weird, now return EIO. Some portions of the code need to be rewritten to use tprintf() instead of simple printf()'s, so the messages will also appear on the session terminal, however.
1995-01-11 16:13:01 +00:00
TRACE1("[fd%d: turnoff]", fdu);
Don't turn off the motor on active drives. The motor timeout may occur while a command is in progress if the system is overloaded or was stopped at a debugger breakpoint.
1996-02-25 21:01:31 +00:00
/*
* Don't turn off the motor yet if the drive is active.
* XXX shouldn't even schedule turnoff until drive is inactive
* and nothing is queued on it.
*/
if (fd->fdc->state != DEVIDLE && fd->fdc->fdu == fdu) {
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
fd->toffhandle = timeout(fd_turnoff, arg1, 4 * hz);
Don't turn off the motor on active drives. The motor timeout may occur while a command is in progress if the system is overloaded or was stopped at a debugger breakpoint.
1996-02-25 21:01:31 +00:00
return;
}
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
s = splbio();
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fd->flags &= ~FD_MOTOR;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
set_motor(fd->fdc->fdcu, fd->fdsu, TURNOFF);
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
splx(s);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
static void
Ran ft.c through ident. Added a missing #ifdef INET wrapper in lpt.c Main change: Removed the timeout_func_t casts from timeout calls and correctly defined the timeout routines to conform to the new format. lpt.c doesn't have this change. Reviewed by: Submitted by:
1994-08-23 07:52:29 +00:00
fd_motor_on(void *arg1)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
fdu_t fdu = (fdu_t)arg1;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
int s;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fd_p fd = fd_data + fdu;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
s = splbio();
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fd->flags &= ~FD_MOTOR_WAIT;
if((fd->fdc->fd == fd) && (fd->fdc->state == MOTORWAIT))
{
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
fdintr(fd->fdc->fdcu);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
splx(s);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
static void
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
fd_turnon(fdu_t fdu)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
fd_p fd = fd_data + fdu;
if(!(fd->flags & FD_MOTOR))
{
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fd->flags |= (FD_MOTOR + FD_MOTOR_WAIT);
set_motor(fd->fdc->fdcu, fd->fdsu, TURNON);
Back out Joerg's latest commit. Sorry, Joerg, but this breaks the install floppies now. I'm not sure why, but things hang when it gets to the `changing root to fd0c' part. Without your latest commit, everything works fine. Maybe you can figure out what you broke after ALPHA! :)
1994-11-02 09:08:40 +00:00
timeout(fd_motor_on, (caddr_t)fdu, hz); /* in 1 sec its ok */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
}
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
static void
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fdc_reset(fdc_p fdc)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdcu_t fdcu = fdc->fdcu;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/* Try a reset, keep motor on */
outb(fdc->baseport + FDOUT, fdc->fdout & ~(FDO_FRST|FDO_FDMAEN));
TRACE1("[0x%x->FDOUT]", fdc->fdout & ~(FDO_FRST|FDO_FDMAEN));
DELAY(100);
/* enable FDC, but defer interrupts a moment */
outb(fdc->baseport + FDOUT, fdc->fdout & ~FDO_FDMAEN);
TRACE1("[0x%x->FDOUT]", fdc->fdout & ~FDO_FDMAEN);
DELAY(100);
outb(fdc->baseport + FDOUT, fdc->fdout);
TRACE1("[0x%x->FDOUT]", fdc->fdout);
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
/* XXX after a reset, silently believe the FDC will accept commands */
(void)fd_cmd(fdcu, 3, NE7CMD_SPECIFY,
NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
0);
Enable the FIFO on enhanced floppy controllers. This reduces the number of dma overruns/underruns for systems under heavy dma load. As a side effect, broken enhanced floppy controllers that sometimes don't detect dma overruns/underruns will give less errors. Reviewed by: j@uriah.heep.sax.de (J Wunsch)
1997-09-17 20:16:17 +00:00
if (fdc->flags & FDC_HAS_FIFO)
(void) enable_fifo(fdc);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
/****************************************************************************/
/* fdc in/out */
/****************************************************************************/
int
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
in_fdc(fdcu_t fdcu)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
int baseport = fdc_data[fdcu].baseport;
int i, j = 100000;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
while ((i = inb(baseport+FDSTS) & (NE7_DIO|NE7_RQM))
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
!= (NE7_DIO|NE7_RQM) && j-- > 0)
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (i == NE7_RQM)
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
return fdc_err(fdcu, "ready for output in input\n");
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
if (j <= 0)
Hide the "input/output timeout" messages behind the bootverbose case. This message has been confusing innocent ft users. It should go into 2.1 as well, it's a very simple fix.
1995-10-04 07:01:23 +00:00
return fdc_err(fdcu, bootverbose? "input ready timeout\n": 0);
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#ifdef FDC_DEBUG
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
i = inb(baseport+FDDATA);
TRACE1("[FDDATA->0x%x]", (unsigned char)i);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(i);
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#else /* !FDC_DEBUG */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
return inb(baseport+FDDATA);
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#endif /* FDC_DEBUG */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
/*
* fd_in: Like in_fdc, but allows you to see if it worked.
*/
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
1995-03-16 18:17:34 +00:00
static int
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fd_in(fdcu_t fdcu, int *ptr)
{
int baseport = fdc_data[fdcu].baseport;
int i, j = 100000;
while ((i = inb(baseport+FDSTS) & (NE7_DIO|NE7_RQM))
!= (NE7_DIO|NE7_RQM) && j-- > 0)
if (i == NE7_RQM)
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
return fdc_err(fdcu, "ready for output in input\n");
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (j <= 0)
Hide the "input/output timeout" messages behind the bootverbose case. This message has been confusing innocent ft users. It should go into 2.1 as well, it's a very simple fix.
1995-10-04 07:01:23 +00:00
return fdc_err(fdcu, bootverbose? "input ready timeout\n": 0);
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#ifdef FDC_DEBUG
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
i = inb(baseport+FDDATA);
TRACE1("[FDDATA->0x%x]", (unsigned char)i);
*ptr = i;
return 0;
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#else /* !FDC_DEBUG */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
i = inb(baseport+FDDATA);
if (ptr)
*ptr = i;
return 0;
Make FDC_DEBUG a supported option. Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented option, since people started to trust the bogus claim. Once we're going to handle 2.88 MB controllers, we have to redo the chip detection, by now just leave it hidden.
1997-09-16 07:45:45 +00:00
#endif /* FDC_DEBUG */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
}
int
out_fdc(fdcu_t fdcu, int x)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
int baseport = fdc_data[fdcu].baseport;
Fixed poor timeout code in out_fdc. The timeout counter was not being reinitialized between while loops. Added comments about what was going on in the out_fdc routine. out_fdc now returns if the direction bit is not set in time instead of trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
int i;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Fixed poor timeout code in out_fdc. The timeout counter was not being reinitialized between while loops. Added comments about what was going on in the out_fdc routine. out_fdc now returns if the direction bit is not set in time instead of trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
/* Check that the direction bit is set */
i = 100000;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
while ((inb(baseport+FDSTS) & NE7_DIO) && i-- > 0);
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
if (i <= 0) return fdc_err(fdcu, "direction bit not set\n");
Fixed poor timeout code in out_fdc. The timeout counter was not being reinitialized between while loops. Added comments about what was going on in the out_fdc routine. out_fdc now returns if the direction bit is not set in time instead of trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
/* Check that the floppy controller is ready for a command */
i = 100000;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
while ((inb(baseport+FDSTS) & NE7_RQM) == 0 && i-- > 0);
Hide the "input/output timeout" messages behind the bootverbose case. This message has been confusing innocent ft users. It should go into 2.1 as well, it's a very simple fix.
1995-10-04 07:01:23 +00:00
if (i <= 0)
return fdc_err(fdcu, bootverbose? "output ready timeout\n": 0);
Fixed poor timeout code in out_fdc. The timeout counter was not being reinitialized between while loops. Added comments about what was going on in the out_fdc routine. out_fdc now returns if the direction bit is not set in time instead of trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
/* Send the command and return */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
outb(baseport+FDDATA, x);
TRACE1("[0x%x->FDDATA]", x);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return (0);
}
/****************************************************************************/
/* fdopen/fdclose */
/****************************************************************************/
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
int
Declare all the args of Fdopen() and fdclose(). Initialize dk_wpms[] less bogusly. Clean up includes. Remove some obsolete comments.
1995-02-26 01:37:51 +00:00
Fdopen(dev_t dev, int flags, int mode, struct proc *p)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
fdu_t fdu = FDUNIT(minor(dev));
Add popular 720k floppy in HD drive floppy type. Restore check for NUMTYPES in Fdopen.
1993-12-12 16:46:54 +00:00
int type = FDTYPE(minor(dev));
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
fdc_p fdc;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#if NFT > 0
/* check for a tape open */
if (type & F_TAPE_TYPE)
return(ftopen(dev, flags));
#endif
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/* check bounds */
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
if (fdu >= NFD)
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
return(ENXIO);
fdc = fd_data[fdu].fdc;
if ((fdc == NULL) || (fd_data[fdu].type == NO_TYPE))
return(ENXIO);
if (type > NUMDENS)
return(ENXIO);
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
if (type == 0)
type = fd_data[fdu].type;
else {
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
/*
* For each type of basic drive, make sure we are trying
* to open a type it can do,
*/
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
if (type != fd_data[fdu].type) {
switch (fd_data[fdu].type) {
case FD_360:
return(ENXIO);
Reorganization of format table. GAP values changed suitable for possible format code addition. Read/write GAP always 2 now. Interleave parameter added for possible format code addition. Many logical formats added. 720K physical drive added. Problems: still can't read 720..820 media in 1.44 drive.
1993-12-18 01:16:26 +00:00
case FD_720:
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
if ( type != FD_820
&& type != FD_800
)
Reorganization of format table. GAP values changed suitable for possible format code addition. Read/write GAP always 2 now. Interleave parameter added for possible format code addition. Many logical formats added. 720K physical drive added. Problems: still can't read 720..820 media in 1.44 drive.
1993-12-18 01:16:26 +00:00
return(ENXIO);
break;
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
case FD_1200:
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
switch (type) {
case FD_1480:
type = FD_1480in5_25;
break;
case FD_1440:
type = FD_1440in5_25;
break;
case FD_820:
type = FD_820in5_25;
break;
case FD_800:
type = FD_800in5_25;
break;
case FD_720:
type = FD_720in5_25;
break;
case FD_360:
type = FD_360in5_25;
break;
default:
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
return(ENXIO);
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
}
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
break;
case FD_1440:
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
if ( type != FD_1720
&& type != FD_1480
&& type != FD_1200
&& type != FD_820
&& type != FD_800
&& type != FD_720
)
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
return(ENXIO);
break;
}
}
Add more strictly size check into Fdopen to eliminate possible end-user errors. Now: 1) on physical 1.2 can open logical 1.2, 720, 360H 2) on physical 1.44 can open logical 1.44, 720 3) on physical 360 can open logical 360 All other variants refused. C-style improved in this check, multiply if's changed to switch.
1993-12-13 01:34:28 +00:00
}
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
fd_data[fdu].ft = fd_types + type - 1;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fd_data[fdu].flags |= FD_OPEN;
return 0;
}
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
int
Declare all the args of Fdopen() and fdclose(). Initialize dk_wpms[] less bogusly. Clean up includes. Remove some obsolete comments.
1995-02-26 01:37:51 +00:00
fdclose(dev_t dev, int flags, int mode, struct proc *p)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
fdu_t fdu = FDUNIT(minor(dev));
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#if NFT > 0
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
int type = FDTYPE(minor(dev));
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
if (type & F_TAPE_TYPE)
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
return ftclose(dev, flags);
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#endif
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fd_data[fdu].flags &= ~FD_OPEN;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fd_data[fdu].options &= ~FDOPT_NORETRY;
Finally implement support for the `lsdev' program. The controller is now marked busy as long as it's being in non-reset state, and the drives are busy as long as at least one instance is open. Also reformat everything to fit into 80 columns again. Changed my mind wrt. error reporting for a write-protected drive and an open() with write intent; ENXIO has been too weird, now return EIO. Some portions of the code need to be rewritten to use tprintf() instead of simple printf()'s, so the messages will also appear on the session terminal, however.
1995-01-11 16:13:01 +00:00
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(0);
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/****************************************************************************/
/* fdstrategy */
/****************************************************************************/
void
fdstrategy(struct buf *bp)
{
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
unsigned nblocks, blknum, cando;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
int s;
fdcu_t fdcu;
fdu_t fdu;
fdc_p fdc;
fd_p fd;
size_t fdblk;
fdu = FDUNIT(minor(bp->b_dev));
fd = &fd_data[fdu];
fdc = fd->fdc;
fdcu = fdc->fdcu;
#if NFT > 0
if (FDTYPE(minor(bp->b_dev)) & F_TAPE_TYPE) {
/* ft tapes do not (yet) support strategy i/o */
Merge RELENG_2_0_5 into HEAD
1995-06-11 19:33:05 +00:00
bp->b_error = ENODEV;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
bp->b_flags |= B_ERROR;
goto bad;
}
/* check for controller already busy with tape */
if (fdc->flags & FDC_TAPE_BUSY) {
bp->b_error = EBUSY;
bp->b_flags |= B_ERROR;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
goto bad;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
}
#endif
Merge RELENG_2_0_5 into HEAD
1995-06-11 19:33:05 +00:00
fdblk = 128 << (fd->ft->secsize);
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if (!(bp->b_flags & B_FORMAT)) {
if ((fdu >= NFD) || (bp->b_blkno < 0)) {
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
printf(
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
"fd%d: fdstrat: bad request blkno = %lu, bcount = %ld\n",
Cosmetics. Silence gcc -Wall. Much more to do here :-(
1994-10-10 01:12:27 +00:00
fdu, (u_long)bp->b_blkno, bp->b_bcount);
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
bp->b_error = EINVAL;
bp->b_flags |= B_ERROR;
goto bad;
}
if ((bp->b_bcount % fdblk) != 0) {
bp->b_error = EINVAL;
bp->b_flags |= B_ERROR;
goto bad;
}
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/*
* Set up block calculations.
*/
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
if (bp->b_blkno > 20000000) {
/*
* Reject unreasonably high block number, prevent the
* multiplication below from overflowing.
*/
bp->b_error = EINVAL;
bp->b_flags |= B_ERROR;
goto bad;
}
blknum = (unsigned) bp->b_blkno * DEV_BSIZE/fdblk;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
nblocks = fd->ft->size;
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
bp->b_resid = 0;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if (blknum + (bp->b_bcount / fdblk) > nblocks) {
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
if (blknum <= nblocks) {
cando = (nblocks - blknum) * fdblk;
bp->b_resid = bp->b_bcount - cando;
if (cando == 0)
goto bad; /* not actually bad but EOF */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
} else {
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
bp->b_error = EINVAL;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
bp->b_flags |= B_ERROR;
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
goto bad;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
}
}
Fixed (nonexistent) initialization of bp->b_pblkno. disksort() for floppies must have been random in 2.x since we reintroduced sorting on b_pblkno on 1995/03/18. Drivers still initialize b_cylin/b_resid although this is no longer used. Removed unused, wrong function fdsize(). (Returning 0 means that the device exists and has size 0, not that the device doesn't exist. swaponvp() allows for size 0 by stupidly calling the d_psize function twice if the size isn't 0. setdumpdev() doesn't allow for it.) Continued removing /* ARGSUSED */ from drivers.
1995-11-18 07:48:11 +00:00
bp->b_pblkno = bp->b_blkno;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
s = splbio();
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
bufqdisksort(&fdc->head, bp);
untimeout(fd_turnoff, (caddr_t)fdu, fd->toffhandle); /* a good idea */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdstart(fdcu);
splx(s);
return;
bad:
biodone(bp);
}
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
/****************************************************************************/
/* fdsIOreq */
/****************************************************************************/
static void
fdsIOreq(void *private ,struct buf *bp)
{
unsigned nblocks, blknum, cando;
int s;
fdcu_t fdcu;
fdu_t fdu;
fdc_p fdc;
fd_p fd;
size_t fdblk;
struct subdev *sd;
sd = private;
fd = sd->drive;
fdu = fd->unit;
fdc = fd->fdc;
fdcu = fdc->fdcu;
/* check for controller already busy with tape */
if (fdc->flags & FDC_TAPE_BUSY) {
bp->b_error = EBUSY;
bp->b_flags |= B_ERROR;
goto bad;
}
bp->b_driver1 = sd; /* squirrel away which device.. */
bp->b_resid = 0;
s = splbio();
bufqdisksort(&fdc->head, bp);
untimeout(fd_turnoff, (caddr_t)fdu, fd->toffhandle); /* a good idea */
fdstart(fdcu);
splx(s);
return;
bad:
biodone(bp);
return;
}
#endif /* SLICE */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/***************************************************************\
* fdstart *
* We have just queued something.. if the controller is not busy *
* then simulate the case where it has just finished a command *
* So that it (the interrupt routine) looks on the queue for more*
* work to do and picks up what we just added. *
* If the controller is already busy, we need do nothing, as it *
* will pick up our work when the present work completes *
\***************************************************************/
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
static void
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fdstart(fdcu_t fdcu)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
int s;
s = splbio();
if(fdc_data[fdcu].state == DEVIDLE)
{
fdintr(fdcu);
}
splx(s);
}
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
static void
Ran ft.c through ident. Added a missing #ifdef INET wrapper in lpt.c Main change: Removed the timeout_func_t casts from timeout calls and correctly defined the timeout routines to conform to the new format. lpt.c doesn't have this change. Reviewed by: Submitted by:
1994-08-23 07:52:29 +00:00
fd_timeout(void *arg1)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
fdcu_t fdcu = (fdcu_t)arg1;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdu_t fdu = fdc_data[fdcu].fdu;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
int baseport = fdc_data[fdcu].baseport;
Move from the old buf.b_actf to the new TAILQ(buf.b_act).
1996-05-03 14:57:27 +00:00
struct buf *bp;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
int s;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
bp = bufq_first(&fdc_data[fdcu].head);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/*
* Due to IBM's brain-dead design, the FDC has a faked ready
* signal, hardwired to ready == true. Thus, any command
* issued if there's no diskette in the drive will _never_
* complete, and must be aborted by resetting the FDC.
* Many thanks, Big Blue!
*/
s = splbio();
TRACE1("fd%d[fd_timeout()]", fdu);
/* See if the controller is still busy (patiently awaiting data) */
if(((inb(baseport + FDSTS)) & (NE7_CB|NE7_RQM)) == NE7_CB)
{
TRACE1("[FDSTS->0x%x]", inb(baseport + FDSTS));
/* yup, it is; kill it now */
fdc_reset(&fdc_data[fdcu]);
printf("fd%d: Operation timeout\n", fdu);
}
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
if (bp)
{
retrier(fdcu);
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdc_data[fdcu].status[0] = NE7_ST0_IC_RC;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc_data[fdcu].state = IOTIMEDOUT;
if( fdc_data[fdcu].retry < 6)
fdc_data[fdcu].retry = 6;
}
else
{
fdc_data[fdcu].fd = (fd_p) 0;
fdc_data[fdcu].fdu = -1;
fdc_data[fdcu].state = DEVIDLE;
}
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
fdintr(fdcu);
splx(s);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
/* just ensure it has the right spl */
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
static void
Ran ft.c through ident. Added a missing #ifdef INET wrapper in lpt.c Main change: Removed the timeout_func_t casts from timeout calls and correctly defined the timeout routines to conform to the new format. lpt.c doesn't have this change. Reviewed by: Submitted by:
1994-08-23 07:52:29 +00:00
fd_pseudointr(void *arg1)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
fdcu_t fdcu = (fdcu_t)arg1;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
int s;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
s = splbio();
fdintr(fdcu);
splx(s);
}
/***********************************************************************\
* fdintr *
* keep calling the state machine until it returns a 0 *
* ALWAYS called at SPLBIO *
\***********************************************************************/
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
void
fdintr(fdcu_t fdcu)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
fdc_p fdc = fdc_data + fdcu;
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#if NFT > 0
fdu_t fdu = fdc->fdu;
if (fdc->flags & FDC_TAPE_BUSY)
(ftintr(fdu));
else
#endif
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
while(fdstate(fdcu, fdc))
;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
/***********************************************************************\
* The controller state machine. *
* if it returns a non zero value, it should be called again immediatly *
\***********************************************************************/
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
static int
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fdstate(fdcu_t fdcu, fdc_p fdc)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
struct subdev *sd;
Remove unused functions and variables, make things static, and other cleanups.
1995-10-28 15:39:31 +00:00
int read, format, head, sec = 0, sectrac, st0, cyl, st3;
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
unsigned blknum = 0, b_cylinder = 0;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdu_t fdu = fdc->fdu;
fd_p fd;
Move from the old buf.b_actf to the new TAILQ(buf.b_act).
1996-05-03 14:57:27 +00:00
register struct buf *bp;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
struct fd_formb *finfo = NULL;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
size_t fdblk;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
bp = bufq_first(&fdc->head);
Move from the old buf.b_actf to the new TAILQ(buf.b_act).
1996-05-03 14:57:27 +00:00
if(!bp) {
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/***********************************************\
* nothing left for this controller to do *
* Force into the IDLE state, *
\***********************************************/
fdc->state = DEVIDLE;
if(fdc->fd)
{
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("fd%d: unexpected valid fd pointer\n",
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdc->fdu);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->fd = (fd_p) 0;
fdc->fdu = -1;
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
TRACE1("[fdc%d IDLE]", fdcu);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(0);
}
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
sd = bp->b_driver1;
fd = sd->drive;
fdu = fd->unit;
#else
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdu = FDUNIT(minor(bp->b_dev));
fd = fd_data + fdu;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdblk = 128 << fd->ft->secsize;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
if (fdc->fd && (fd != fdc->fd))
{
Terminate all probe/diagnostic/error messages correctly with a \n. Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of ways the current scheme failed to end the output with \n. Add controller and/or drive designator to the fron of several messages that come from this drive. [It's not fun to track down driver messages using grep over the source tree.] Reviewed by: joerg
1995-03-26 19:28:22 +00:00
printf("fd%d: confused fd pointers\n", fdu);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
read = bp->b_flags & B_READ;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
format = bp->b_flags & B_FORMAT;
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
if(format) {
In all such uses of struct buf: 's/b_un.b_addr/b_data/g'
1997-12-02 21:07:20 +00:00
finfo = (struct fd_formb *)bp->b_data;
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
fd->skip = (char *)&(finfo->fd_formb_cylno(0))
- (char *)finfo;
}
if (fdc->state == DOSEEK || fdc->state == SEEKCOMPLETE) {
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
blknum = (unsigned) bp->b_pblkno * DEV_BSIZE/fdblk +
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
fd->skip/fdblk;
b_cylinder = blknum / (fd->ft->sectrac * fd->ft->heads);
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
TRACE1("fd%d", fdu);
TRACE1("[%s]", fdstates[fdc->state]);
TRACE1("(0x%x)", fd->flags);
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
untimeout(fd_turnoff, (caddr_t)fdu, fd->toffhandle);
Fix a call to timeout that wasn't properly saving it's callout handle. Submitted by: durian@plutotech.com
1997-09-23 22:14:43 +00:00
fd->toffhandle = timeout(fd_turnoff, (caddr_t)fdu, 4 * hz);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
switch (fdc->state)
{
case DEVIDLE:
case FINDWORK: /* we have found new work */
fdc->retry = 0;
fd->skip = 0;
fdc->fd = fd;
fdc->fdu = fdu;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
outb(fdc->baseport+FDCTL, fd->ft->trans);
TRACE1("[0x%x->FDCTL]", fd->ft->trans);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/*******************************************************\
* If the next drive has a motor startup pending, then *
Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108.
1998-04-17 22:37:19 +00:00
* it will start up in its own good time *
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
\*******************************************************/
if(fd->flags & FD_MOTOR_WAIT)
{
fdc->state = MOTORWAIT;
return(0); /* come back later */
}
/*******************************************************\
* Maybe if it's not starting, it SHOULD be starting *
\*******************************************************/
if (!(fd->flags & FD_MOTOR))
{
fdc->state = MOTORWAIT;
fd_turnon(fdu);
return(0);
}
else /* at least make sure we are selected */
{
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
set_motor(fdcu, fd->fdsu, TURNON);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Back out Joerg's latest commit. Sorry, Joerg, but this breaks the install floppies now. I'm not sure why, but things hang when it gets to the `changing root to fd0c' part. Without your latest commit, everything works fine. Maybe you can figure out what you broke after ALPHA! :)
1994-11-02 09:08:40 +00:00
fdc->state = DOSEEK;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
break;
case DOSEEK:
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
if (b_cylinder == (unsigned)fd->track)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
fdc->state = SEEKCOMPLETE;
break;
}
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (fd_cmd(fdcu, 3, NE7CMD_SEEK,
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
fd->fdsu, b_cylinder * fd->ft->steptrac,
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
0))
Checking for timeout at several critical calls to ``out_fdc()'' now, so i hope i've finally removed all the occasions where the driver got stuck when there's no floppy in the drive. Also attemmpting to omit the error mesage for ``recalib failed'' for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
{
/*
* seek command not accepted, looks like
* the FDC went off to the Saints...
*/
fdc->retry = 6; /* try a reset */
return(retrier(fdcu));
}
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
fd->track = FD_NO_TRACK;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->state = SEEKWAIT;
return(0); /* will return later */
case SEEKWAIT:
/* allow heads to settle */
Extended the SEEKWAIT and RECALWAIT somewhat to avoid annoying messages.
1994-11-18 10:18:36 +00:00
timeout(fd_pseudointr, (caddr_t)fdcu, hz / 16);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->state = SEEKCOMPLETE;
return(0); /* will return later */
case SEEKCOMPLETE : /* SEEK DONE, START DMA */
/* Make sure seek really happened*/
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if(fd->track == FD_NO_TRACK)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
int descyl = b_cylinder * fd->ft->steptrac;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
do {
/*
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
* This might be a "ready changed" interrupt,
* which cannot really happen since the
* RDY pin is hardwired to + 5 volts. This
* generally indicates a "bouncing" intr
* line, so do one of the following:
*
* When running on an enhanced FDC that is
* known to not go stuck after responding
* with INVALID, fetch all interrupt states
* until seeing either an INVALID or a
* real interrupt condition.
*
* When running on a dumb old NE765, give
* up immediately. The controller will
* provide up to four dummy RC interrupt
* conditions right after reset (for the
* corresponding four drives), so this is
* our only chance to get notice that it
* was not the FDC that caused the interrupt.
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
*/
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (fd_sense_int(fdc, &st0, &cyl)
== FD_NOT_VALID)
return 0;
if(fdc->fdct == FDC_NE765
&& (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC)
return 0; /* hope for a real intr */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
} while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC);
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if (0 == descyl)
{
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
int failed = 0;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/*
* seek to cyl 0 requested; make sure we are
* really there
*/
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (fd_sense_drive_status(fdc, &st3))
failed = 1;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if ((st3 & NE7_ST3_T0) == 0) {
printf(
"fd%d: Seek to cyl 0, but not really there (ST3 = %b)\n",
fdu, st3, NE7_ST3BITS);
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
failed = 1;
}
if (failed)
{
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if(fdc->retry < 3)
fdc->retry = 3;
return(retrier(fdcu));
}
}
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
if (cyl != descyl)
{
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
printf(
"fd%d: Seek to cyl %d failed; am at cyl %d (ST0 = 0x%x)\n",
Fix -Wformat warnings, still need to do something about %b and pointer type args.
1995-05-09 12:26:00 +00:00
fdu, descyl, cyl, st0);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(retrier(fdcu));
}
}
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
fd->track = b_cylinder;
In all such uses of struct buf: 's/b_un.b_addr/b_data/g'
1997-12-02 21:07:20 +00:00
isa_dmastart(bp->b_flags, bp->b_data+fd->skip,
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
format ? bp->b_bcount : fdblk, fdc->dmachan);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
sectrac = fd->ft->sectrac;
sec = blknum % (sectrac * fd->ft->heads);
head = sec / sectrac;
sec = sec % sectrac + 1;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fd->hddrv = ((head&1)<<2)+fdu;
if(format || !read)
{
/* make sure the drive is writable */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if(fd_sense_drive_status(fdc, &st3) != 0)
Checking for timeout at several critical calls to ``out_fdc()'' now, so i hope i've finally removed all the occasions where the driver got stuck when there's no floppy in the drive. Also attemmpting to omit the error mesage for ``recalib failed'' for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
{
/* stuck controller? */
fdc->retry = 6; /* reset the beast */
return(retrier(fdcu));
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if(st3 & NE7_ST3_WP)
{
/*
* XXX YES! this is ugly.
* in order to force the current operation
* to fail, we will have to fake an FDC
* error - all error handling is done
* by the retrier()
*/
fdc->status[0] = NE7_ST0_IC_AT;
fdc->status[1] = NE7_ST1_NW;
fdc->status[2] = 0;
fdc->status[3] = fd->track;
fdc->status[4] = head;
fdc->status[5] = sec;
fdc->retry = 8; /* break out immediately */
fdc->state = IOTIMEDOUT; /* not really... */
return (1);
}
}
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
if(format)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
/* formatting */
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
if(fd_cmd(fdcu, 6,
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
NE7CMD_FORMAT,
head << 2 | fdu,
finfo->fd_formb_secshift,
finfo->fd_formb_nsecs,
finfo->fd_formb_gaplen,
finfo->fd_formb_fillbyte,
0))
Checking for timeout at several critical calls to ``out_fdc()'' now, so i hope i've finally removed all the occasions where the driver got stuck when there's no floppy in the drive. Also attemmpting to omit the error mesage for ``recalib failed'' for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
{
/* controller fell over */
fdc->retry = 6;
return(retrier(fdcu));
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
}
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
else
{
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (fd_cmd(fdcu, 9,
(read ? NE7CMD_READ : NE7CMD_WRITE),
head << 2 | fdu, /* head & unit */
fd->track, /* track */
head,
sec, /* sector + 1 */
fd->ft->secsize, /* sector size */
sectrac, /* sectors/track */
fd->ft->gap, /* gap size */
fd->ft->datalen, /* data length */
0))
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
{
Checking for timeout at several critical calls to ``out_fdc()'' now, so i hope i've finally removed all the occasions where the driver got stuck when there's no floppy in the drive. Also attemmpting to omit the error mesage for ``recalib failed'' for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
/* the beast is sleeping again */
fdc->retry = 6;
return(retrier(fdcu));
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
}
}
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->state = IOCOMPLETE;
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
fd->tohandle = timeout(fd_timeout, (caddr_t)fdcu, hz);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(0); /* will return later */
case IOCOMPLETE: /* IO DONE, post-analyze */
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
untimeout(fd_timeout, (caddr_t)fdcu, fd->tohandle);
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (fd_read_status(fdc, fd->fdsu))
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (fdc->retry < 6)
fdc->retry = 6; /* force a reset */
return retrier(fdcu);
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdc->state = IOTIMEDOUT;
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/* FALLTHROUGH */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
case IOTIMEDOUT:
In all such uses of struct buf: 's/b_un.b_addr/b_data/g'
1997-12-02 21:07:20 +00:00
isa_dmadone(bp->b_flags, bp->b_data+fd->skip,
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
format ? bp->b_bcount : fdblk, fdc->dmachan);
if (fdc->status[0] & NE7_ST0_IC)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if ((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT
&& fdc->status[1] & NE7_ST1_OR) {
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
/*
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
* DMA overrun. Someone hogged the bus
* and didn't release it in time for the
* next FDC transfer.
* Just restart it, don't increment retry
* count. (vak)
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
*/
fdc->state = SEEKCOMPLETE;
return (1);
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
else if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_IV
&& fdc->retry < 6)
fdc->retry = 6; /* force a reset */
else if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT
&& fdc->status[2] & NE7_ST2_WC
&& fdc->retry < 3)
fdc->retry = 3; /* force recalibrate */
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(retrier(fdcu));
}
/* All OK */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fd->skip += fdblk;
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
if (!format && fd->skip < bp->b_bcount - bp->b_resid)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
/* set up next transfer */
fdc->state = DOSEEK;
}
else
{
/* ALL DONE */
fd->skip = 0;
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
bufq_remove(&fdc->head, bp);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
biodone(bp);
fdc->fd = (fd_p) 0;
fdc->fdu = -1;
fdc->state = FINDWORK;
}
return(1);
case RESETCTLR:
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdc_reset(fdc);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->retry++;
fdc->state = STARTRECAL;
break;
case STARTRECAL:
Fetch the (dummy) READY CHANGED condition interrupt stati that happen after an FDC reset. Submitted by: bde
1996-03-31 18:04:51 +00:00
/* XXX clear the fdc results from the last reset, if any. */
{
int i;
for (i = 0; i < 4; i++)
(void)fd_sense_int(fdc, &st0, &cyl);
}
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if(fd_cmd(fdcu,
2, NE7CMD_RECAL, fdu,
0)) /* Recalibrate Function */
Checking for timeout at several critical calls to ``out_fdc()'' now, so i hope i've finally removed all the occasions where the driver got stuck when there's no floppy in the drive. Also attemmpting to omit the error mesage for ``recalib failed'' for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
{
/* arrgl */
fdc->retry = 6;
return(retrier(fdcu));
}
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->state = RECALWAIT;
return(0); /* will return later */
case RECALWAIT:
/* allow heads to settle */
Extended the SEEKWAIT and RECALWAIT somewhat to avoid annoying messages.
1994-11-18 10:18:36 +00:00
timeout(fd_pseudointr, (caddr_t)fdcu, hz / 8);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->state = RECALCOMPLETE;
return(0); /* will return later */
case RECALCOMPLETE:
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
do {
/*
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
* See SEEKCOMPLETE for a comment on this:
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
*/
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (fd_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID)
return 0;
if(fdc->fdct == FDC_NE765
&& (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC)
return 0; /* hope for a real intr */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
} while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC);
if ((st0 & NE7_ST0_IC) != NE7_ST0_IC_NT || cyl != 0)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Checking for timeout at several critical calls to ``out_fdc()'' now, so i hope i've finally removed all the occasions where the driver got stuck when there's no floppy in the drive. Also attemmpting to omit the error mesage for ``recalib failed'' for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
if(fdc->retry > 3)
/*
* a recalibrate from beyond cylinder 77
* will "fail" due to the FDC limitations;
* since people used to complain much about
* the failure message, try not logging
* this one if it seems to be the first
* time in a line
*/
printf("fd%d: recal failed ST0 %b cyl %d\n",
fdu, st0, NE7_ST0BITS, cyl);
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if(fdc->retry < 3) fdc->retry = 3;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(retrier(fdcu));
}
fd->track = 0;
/* Seek (probably) necessary */
fdc->state = DOSEEK;
return(1); /* will return immediatly */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
case MOTORWAIT:
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
if(fd->flags & FD_MOTOR_WAIT)
{
return(0); /* time's not up yet */
}
Back out Joerg's latest commit. Sorry, Joerg, but this breaks the install floppies now. I'm not sure why, but things hang when it gets to the `changing root to fd0c' part. Without your latest commit, everything works fine. Maybe you can figure out what you broke after ALPHA! :)
1994-11-02 09:08:40 +00:00
/*
* since the controller was off, it has lost its
* idea about the current track it were; thus,
* recalibrate the bastard
*/
fdc->state = STARTRECAL;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(1); /* will return immediatly */
default:
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
printf("fdc%d: Unexpected FD int->", fdcu);
if (fd_read_status(fdc, fd->fdsu) == 0)
Argl!, finally found this bummer. The code testing for a write- protected drive at open() time has been *totally bogus*! The guy who submitted it didn't understand all the implications of calling set_motor(), and the `who' who included the patch into the tree did it blindly... Pleeeeze, don't commit code to this driver unless you are really going to understand what it does! This one caused me to pull out even more hears, and those who know me do know that i ain't got too many o'them. :-)
1995-01-12 19:20:28 +00:00
printf("FDC status :%lx %lx %lx %lx %lx %lx %lx ",
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdc->status[0],
fdc->status[1],
fdc->status[2],
fdc->status[3],
fdc->status[4],
fdc->status[5],
fdc->status[6] );
else
Argl!, finally found this bummer. The code testing for a write- protected drive at open() time has been *totally bogus*! The guy who submitted it didn't understand all the implications of calling set_motor(), and the `who' who included the patch into the tree did it blindly... Pleeeeze, don't commit code to this driver unless you are really going to understand what it does! This one caused me to pull out even more hears, and those who know me do know that i ain't got too many o'them. :-)
1995-01-12 19:20:28 +00:00
printf("No status available ");
if (fd_sense_int(fdc, &st0, &cyl) != 0)
{
printf("[controller is dead now]\n");
return(0);
}
printf("ST0 = %x, PCN = %x\n", st0, cyl);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(0);
}
Argl!, finally found this bummer. The code testing for a write- protected drive at open() time has been *totally bogus*! The guy who submitted it didn't understand all the implications of calling set_motor(), and the `who' who included the patch into the tree did it blindly... Pleeeeze, don't commit code to this driver unless you are really going to understand what it does! This one caused me to pull out even more hears, and those who know me do know that i ain't got too many o'them. :-)
1995-01-12 19:20:28 +00:00
/*XXX confusing: some branches return immediately, others end up here*/
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
return(1); /* Come back immediatly to new state */
}
Make everything compile with -Wtraditional. Make it easier to distribute a binary link-kit. Make all non-optional options (pagers, procfs) standard, and update LINT to reflect new symtab requirements. NB: -Wtraditional will henceforth be forgotten. This editing pass was primarily intended to detect any constructions where the old code might have been relying on traditional C semantics or syntax. These were all fixed, and the result of fixing some of them means that -Wall is now a realistic possibility within a few weeks.
1993-12-19 00:55:01 +00:00
static int
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
retrier(fdcu)
fdcu_t fdcu;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
struct subdev *sd;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc_p fdc = fdc_data + fdcu;
Move from the old buf.b_actf to the new TAILQ(buf.b_act).
1996-05-03 14:57:27 +00:00
register struct buf *bp;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
struct fd_data *fd;
int fdu;
#endif
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
bp = bufq_first(&fdc->head);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
sd = bp->b_driver1;
fd = sd->drive;
fdu = fd->unit;
if(fd->options & FDOPT_NORETRY)
goto fail;
#else
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if(fd_data[FDUNIT(minor(bp->b_dev))].options & FDOPT_NORETRY)
goto fail;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
switch(fdc->retry)
{
case 0: case 1: case 2:
fdc->state = SEEKCOMPLETE;
break;
case 3: case 4: case 5:
fdc->state = STARTRECAL;
break;
case 6:
fdc->state = RESETCTLR;
break;
case 7:
break;
default:
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fail:
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
printf("fd%d: hard error, block %d ", fdu,
fd->skip / DEV_BSIZE);
#else
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
dev_t sav_b_dev = bp->b_dev;
/* Trick diskerr */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
bp->b_dev = makedev(major(bp->b_dev),
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
(FDUNIT(minor(bp->b_dev))<<3)|RAW_PART);
>From: bde@kralizec.zeta.org.au (Bruce Evans) Date: Thu, 16 Sep 93 01:35:10 +1000 Julian writes: >In fact DEVIDLE and FINDWORK ended up being basically equivalent. >the bit I wonder about, is the returning of 0.. What (other than >another request from somewhere else in the kernel) is going to start >work on the next item on the queue? I think removing FINDWORK would make things clearer. Nothing much is going to start work on the next item. However, it is pointless to continue processing the queue for the same unready drive. Aborting all reads and trying harder to perform all writes would be better. Julian writes. > no, actually it should be: > fdt = fd_data[FDUNIT(minor(dev))].ft; Fixed. From: bde@kralizec.zeta.org.au (Bruce Evans) Date: Thu, 16 Sep 93 22:56:01 +1000 The fd driver reported the wrong cylinder/head/sector numbers after an error (ST3 is only valid after a sense-drive command), and didn't report fs block numbers (diskerr was not used). There was an old problem with writes to block fd devices. Try this: 1. write protect floppy in fd0. 2. tar cf /dev/fd0a /dev/null. Repeat a few times. Later writes tend to terminate earlier. 3. un-write protect floppy. 4. repeat step 2. The writes tend to return 0, 2048, 4096, ... and then succeed. This was caused by a bug in vfs__bios.c. (The bug is fixed in NetBSD's vfs_bio.c.) fd.c sets bp->b_resid to nonzero after an error. vfs__bios.c was not initializing bp->b_resid. This causes some writes to terminate early (e.g., writes to block devices; see spec_write()). Related funnies: 1. Nothing tries to write the residual bytes. 2. The wd driver sets bp->b_resid to 0 after an error, so there's no way anything else could write the residual bytes. 3. I use the block fd device for tar because the raw device seemed to have more bugs long ago, and because it ought to be able to handle buffering more transparently (I don't want to have to know the device size). But spec_write() always uses the size BLKDEV_IOSIZE == 2048 which is too small. For disks it should use the size of one track (rounded down to meet the next track boundary or the i/o size). Here it would help if the DIOCGPART ioctl worked. But DIOCGPART is not implemented for floppies, and the disk size is ignored except for partitions of type FS_BSDFFS. Bruce
1993-09-23 15:22:57 +00:00
diskerr(bp, "fd", "hard error", LOG_PRINTF,
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdc->fd->skip / DEV_BSIZE,
(struct disklabel *)NULL);
No more partition bits in floppy minor. Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density. If density == 0, CMOS-detect format assumed. Fix attach code for correct work with unknown CMOS floppy types. Trick diskerr to handle new minor. 1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
bp->b_dev = sav_b_dev;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif /* !SLICE */
Peter's work to work around one of the most annoying bugs in the floppy driver (or in the hardware?). It turned out to be caused by spurious interrupts, right after an FDC reset. Also major cleanup in the low-level structure, there are now functions performing error-checks for the FDC I/O. Submitted by: (mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
if (fdc->flags & FDC_STAT_VALID)
{
printf(
" (ST0 %b ST1 %b ST2 %b cyl %ld hd %ld sec %ld)\n",
fdc->status[0], NE7_ST0BITS,
fdc->status[1], NE7_ST1BITS,
fdc->status[2], NE7_ST2BITS,
fdc->status[3], fdc->status[4],
fdc->status[5]);
}
else
printf(" (No status)\n");
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
bp->b_flags |= B_ERROR;
bp->b_error = EIO;
Fix the broken EOF handling in the floppy driver. The most obvious appearance of this bug was the malfunctioning -M option in GNU tar (it worked only by explicitly specifying -L). Reviewed by: bde, and partially corrected accoring to his comments Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
bp->b_resid += bp->b_bcount - fdc->fd->skip;
aha1542.c aic6360.c cy.c fd.c ft.c if_ie.c if_wl.c if_zp.c isa.c isa_device.h labpc.c mcd.c ncr5380.c scd.c seagate.c si.c sio.c tw.c ultra14f.c wcd.c wd.c: Update for changes in the callout interface. apic_vector.s icu_vector.s ipl.s ipl_funcs.c: Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
bufq_remove(&fdc->head, bp);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->fd->skip = 0;
biodone(bp);
>From: bde@kralizec.zeta.org.au (Bruce Evans) Date: Thu, 16 Sep 93 01:35:10 +1000 Julian writes: >In fact DEVIDLE and FINDWORK ended up being basically equivalent. >the bit I wonder about, is the returning of 0.. What (other than >another request from somewhere else in the kernel) is going to start >work on the next item on the queue? I think removing FINDWORK would make things clearer. Nothing much is going to start work on the next item. However, it is pointless to continue processing the queue for the same unready drive. Aborting all reads and trying harder to perform all writes would be better. Julian writes. > no, actually it should be: > fdt = fd_data[FDUNIT(minor(dev))].ft; Fixed. From: bde@kralizec.zeta.org.au (Bruce Evans) Date: Thu, 16 Sep 93 22:56:01 +1000 The fd driver reported the wrong cylinder/head/sector numbers after an error (ST3 is only valid after a sense-drive command), and didn't report fs block numbers (diskerr was not used). There was an old problem with writes to block fd devices. Try this: 1. write protect floppy in fd0. 2. tar cf /dev/fd0a /dev/null. Repeat a few times. Later writes tend to terminate earlier. 3. un-write protect floppy. 4. repeat step 2. The writes tend to return 0, 2048, 4096, ... and then succeed. This was caused by a bug in vfs__bios.c. (The bug is fixed in NetBSD's vfs_bio.c.) fd.c sets bp->b_resid to nonzero after an error. vfs__bios.c was not initializing bp->b_resid. This causes some writes to terminate early (e.g., writes to block devices; see spec_write()). Related funnies: 1. Nothing tries to write the residual bytes. 2. The wd driver sets bp->b_resid to 0 after an error, so there's no way anything else could write the residual bytes. 3. I use the block fd device for tar because the raw device seemed to have more bugs long ago, and because it ought to be able to handle buffering more transparently (I don't want to have to know the device size). But spec_write() always uses the size BLKDEV_IOSIZE == 2048 which is too small. For disks it should use the size of one track (rounded down to meet the next track boundary or the i/o size). Here it would help if the DIOCGPART ioctl worked. But DIOCGPART is not implemented for floppies, and the disk size is ignored except for partitions of type FS_BSDFFS. Bruce
1993-09-23 15:22:57 +00:00
fdc->state = FINDWORK;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
fdc->fd = (fd_p) 0;
fdc->fdu = -1;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
/* XXX abort current command, if any. */
>From: bde@kralizec.zeta.org.au (Bruce Evans) Date: Thu, 16 Sep 93 01:35:10 +1000 Julian writes: >In fact DEVIDLE and FINDWORK ended up being basically equivalent. >the bit I wonder about, is the returning of 0.. What (other than >another request from somewhere else in the kernel) is going to start >work on the next item on the queue? I think removing FINDWORK would make things clearer. Nothing much is going to start work on the next item. However, it is pointless to continue processing the queue for the same unready drive. Aborting all reads and trying harder to perform all writes would be better. Julian writes. > no, actually it should be: > fdt = fd_data[FDUNIT(minor(dev))].ft; Fixed. From: bde@kralizec.zeta.org.au (Bruce Evans) Date: Thu, 16 Sep 93 22:56:01 +1000 The fd driver reported the wrong cylinder/head/sector numbers after an error (ST3 is only valid after a sense-drive command), and didn't report fs block numbers (diskerr was not used). There was an old problem with writes to block fd devices. Try this: 1. write protect floppy in fd0. 2. tar cf /dev/fd0a /dev/null. Repeat a few times. Later writes tend to terminate earlier. 3. un-write protect floppy. 4. repeat step 2. The writes tend to return 0, 2048, 4096, ... and then succeed. This was caused by a bug in vfs__bios.c. (The bug is fixed in NetBSD's vfs_bio.c.) fd.c sets bp->b_resid to nonzero after an error. vfs__bios.c was not initializing bp->b_resid. This causes some writes to terminate early (e.g., writes to block devices; see spec_write()). Related funnies: 1. Nothing tries to write the residual bytes. 2. The wd driver sets bp->b_resid to 0 after an error, so there's no way anything else could write the residual bytes. 3. I use the block fd device for tar because the raw device seemed to have more bugs long ago, and because it ought to be able to handle buffering more transparently (I don't want to have to know the device size). But spec_write() always uses the size BLKDEV_IOSIZE == 2048 which is too small. For disks it should use the size of one track (rounded down to meet the next track boundary or the i/o size). Here it would help if the DIOCGPART ioctl worked. But DIOCGPART is not implemented for floppies, and the disk size is ignored except for partitions of type FS_BSDFFS. Bruce
1993-09-23 15:22:57 +00:00
return(1);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
fdc->retry++;
return(1);
}
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
static int
fdformat( struct subdev *sd, struct fd_formb *finfo, struct proc *p)
#else /* !SLICE */
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
static int
fdformat(dev, finfo, p)
dev_t dev;
struct fd_formb *finfo;
struct proc *p;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif /* !SLICE */
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
{
fdu_t fdu;
fd_p fd;
struct buf *bp;
int rv = 0, s;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
size_t fdblk;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
fd = sd->drive;
fdu = fd->unit;
#else
fdu = FDUNIT(minor(dev));
fd = &fd_data[fdu];
#endif
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdblk = 128 << fd->ft->secsize;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
/* set up a buffer header for fdstrategy() */
bp = (struct buf *)malloc(sizeof(struct buf), M_TEMP, M_NOWAIT);
if(bp == 0)
return ENOBUFS;
Finally get rid of this bothering ``biodone: buffer already done'' warning. The buffer needs only to be `biodone()' again if the format operation timed out; otherwise fdstate() did already do the job.
1995-03-12 22:40:56 +00:00
/*
* keep the process from being swapped
*/
p->p_flag |= P_PHYSIO;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
bzero((void *)bp, sizeof(struct buf));
bp->b_flags = B_BUSY | B_PHYS | B_FORMAT;
bp->b_proc = p;
/*
* calculate a fake blkno, so fdstrategy() would initiate a
* seek to the requested cylinder
*/
bp->b_blkno = (finfo->cyl * (fd->ft->sectrac * fd->ft->heads)
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
+ finfo->head * fd->ft->sectrac) * fdblk / DEV_BSIZE;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
bp->b_bcount = sizeof(struct fd_idfield_data) * finfo->fd_formb_nsecs;
In all such uses of struct buf: 's/b_un.b_addr/b_data/g'
1997-12-02 21:07:20 +00:00
bp->b_data = (caddr_t)finfo;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
/* now do the format */
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
bp->b_driver1 = sd;
fdsIOreq(sd, bp);
#else /* !SLICE */
bp->b_dev = dev;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
fdstrategy(bp);
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif /* !SLICE */
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
/* ...and wait for it to complete */
s = splbio();
while(!(bp->b_flags & B_DONE))
{
Back out Joerg's latest commit. Sorry, Joerg, but this breaks the install floppies now. I'm not sure why, but things hang when it gets to the `changing root to fd0c' part. Without your latest commit, everything works fine. Maybe you can figure out what you broke after ALPHA! :)
1994-11-02 09:08:40 +00:00
rv = tsleep((caddr_t)bp, PRIBIO, "fdform", 20 * hz);
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
if(rv == EWOULDBLOCK)
break;
}
splx(s);
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Finally get rid of this bothering ``biodone: buffer already done'' warning. The buffer needs only to be `biodone()' again if the format operation timed out; otherwise fdstate() did already do the job.
1995-03-12 22:40:56 +00:00
if(rv == EWOULDBLOCK) {
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
/* timed out */
rv = EIO;
Finally get rid of this bothering ``biodone: buffer already done'' warning. The buffer needs only to be `biodone()' again if the format operation timed out; otherwise fdstate() did already do the job.
1995-03-12 22:40:56 +00:00
biodone(bp);
}
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
if(bp->b_flags & B_ERROR)
rv = bp->b_error;
Finally get rid of this bothering ``biodone: buffer already done'' warning. The buffer needs only to be `biodone()' again if the format operation timed out; otherwise fdstate() did already do the job.
1995-03-12 22:40:56 +00:00
/*
* allow the process to be swapped
*/
p->p_flag &= ~P_PHYSIO;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
free(bp, M_TEMP);
return rv;
}
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
/*
Declare all the args of Fdopen() and fdclose(). Initialize dk_wpms[] less bogusly. Clean up includes. Remove some obsolete comments.
1995-02-26 01:37:51 +00:00
* TODO: don't allocate buffer on stack.
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
*/
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
static int
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdioctl(dev, cmd, addr, flag, p)
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
dev_t dev;
int cmd;
caddr_t addr;
int flag;
struct proc *p;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
{
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdu_t fdu = FDUNIT(minor(dev));
fd_p fd = &fd_data[fdu];
size_t fdblk;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
struct fd_type *fdt;
struct disklabel *dl;
char buffer[DEV_BSIZE];
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
int error = 0;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
#if NFT > 0
From: Jim Babb <babb@sedhps01.mdc.com> Date: Mon, 14 Feb 94 15:57:14 CST This adds a copyright to the fdc.h file and fixes a bug in re-tries during writes on a heavily loaded system.
1994-02-14 22:24:28 +00:00
int type = FDTYPE(minor(dev));
/* check for a tape ioctl */
if (type & F_TAPE_TYPE)
Add floppy tape driver - fd => fdc
1994-02-07 04:27:13 +00:00
return ftioctl(dev, cmd, addr, flag, p);
#endif
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
/*
* if SLICE is defined then only ft accesses come here
* so break the rest off to another function for SLICE access.
*/
return (ENOTTY);
}
/*
* Slice ioctls come here
*/
static int
fdsioctl( void *private, int cmd, caddr_t addr, int flag, struct proc *p)
{
struct subdev *sd = private;
fd_p fd = sd->drive;
fdu_t fdu = fd->unit;
fdc_p fdc = fd->fdc;
fdcu_t fdcu = fdc->fdcu;
size_t fdblk;
int error = 0;
#endif /* SLICE */
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
fdblk = 128 << fd->ft->secsize;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
switch (cmd)
{
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifndef SLICE
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
case DIOCGDINFO:
bzero(buffer, sizeof (buffer));
dl = (struct disklabel *)buffer;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
dl->d_secsize = fdblk;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
fdt = fd_data[FDUNIT(minor(dev))].ft;
dl->d_secpercyl = fdt->size / fdt->tracks;
dl->d_type = DTYPE_FLOPPY;
Remove transitory labelling code. Labels are now handled by essentially the original 4.4lite code. Machine Specific Partitions are now handled separately.
1995-09-16 17:04:06 +00:00
if (readdisklabel(dkmodpart(dev, RAW_PART), fdstrategy, dl)
== NULL)
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
error = 0;
else
error = EINVAL;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
*(struct disklabel *)addr = *dl;
break;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
case DIOCSDINFO:
if ((flag & FWRITE) == 0)
error = EBADF;
break;
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
case DIOCWLABEL:
if ((flag & FWRITE) == 0)
error = EBADF;
break;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
case DIOCWDINFO:
if ((flag & FWRITE) == 0)
{
error = EBADF;
break;
}
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
dl = (struct disklabel *)addr;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Remove transitory labelling code. Labels are now handled by essentially the original 4.4lite code. Machine Specific Partitions are now handled separately.
1995-09-16 17:04:06 +00:00
if ((error = setdisklabel((struct disklabel *)buffer, dl,
(u_long)0)) != 0)
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
break;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
error = writedisklabel(dev, fdstrategy,
Julian Elischer's disklabel fixes.
1994-10-27 20:45:13 +00:00
(struct disklabel *)buffer);
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
break;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif /* !SLICE */
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
case FD_FORM:
if((flag & FWRITE) == 0)
error = EBADF; /* must be opened for writing */
else if(((struct fd_formb *)addr)->format_version !=
FD_FORMAT_VERSION)
error = EINVAL; /* wrong version of formatting prog */
else
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
error = fdformat(sd, (struct fd_formb *)addr, p);
#else
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
error = fdformat(dev, (struct fd_formb *)addr, p);
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
break;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
case FD_GTYPE: /* get drive type */
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
*(struct fd_type *)addr = *fd->ft;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
break;
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
case FD_STYPE: /* set drive type */
/* this is considered harmful; only allow for superuser */
if(suser(p->p_ucred, &p->p_acflag) != 0)
return EPERM;
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
*fd->ft = *(struct fd_type *)addr;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
break;
case FD_GOPTS: /* get drive options */
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
*(int *)addr = fd->options;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
break;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
case FD_SOPTS: /* set drive options */
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
fd->options = *(int *)addr;
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
break;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
default:
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
error = ENOTTY;
Media table reorganization. Entries for 800 and 820 fixed. From vak@kiae.su: incorporate Joerg Wunsch formatting code correct handle timeouted operations fixed entry for 720 media
1993-12-19 00:40:49 +00:00
break;
}
return (error);
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
}
the second set of changes in a move towards getting devices to be totally dynamic. this is only the devices in i386/isa I'll do more tomorrow. they're completely masked by #ifdef JREMOD at this stage... the eventual aim is that every driver will do a SYSINIT at startup BEFORE the probes, which will effectively link it into the devsw tables etc. If I'd thought about it more I'd have put that in in this set (damn) The ioconf lines generated by config will also end up in the device's own scope as well, so ioconf.c will eventually be gutted the SYSINIT call to the driver will include a phase where the driver links it's ioconf line into a chain of such. when this phase is done then the user can modify them with the boot: -c config menu if he wants, just like now.. config will put the config lines out in the .h file (e.g. in aha.h will be the addresses for the aha driver to look.) as I said this is a very small first step.. the aim of THIS set of edits is to not have to edit conf.c at all when adding a new device.. the tabe will be a simple skeleton.. when this is done, it will allow other changes to be made, all teh time still having a fully working kernel tree, but the logical outcome is the complete REMOVAL of the devsw tables. By the end of this, linked in drivers will be exactly the same as run-time loaded drivers, except they JUST HAPPEN to already be linked and present at startup.. the SYSINIT calls will be the equivalent of the "init" call made to a newly loaded driver in every respect. For this edit, each of the files has the following code inserted into it: obviously, tailored to suit.. ----------------------somewhere at the top: #ifdef JREMOD #include <sys/conf.h> #define CDEV_MAJOR 13 #define BDEV_MAJOR 4 static void sd_devsw_install(); #endif /*JREMOD */ ---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT #ifdef JREMOD sd_devsw_install(); #endif /*JREMOD*/ -----------------------at the bottom: #ifdef JREMOD struct bdevsw sd_bdevsw = { sdopen, sdclose, sdstrategy, sdioctl, /*4*/ sddump, sdsize, 0 }; struct cdevsw sd_cdevsw = { sdopen, sdclose, rawread, rawwrite, /*13*/ sdioctl, nostop, nullreset, nodevtotty,/* sd */ seltrue, nommap, sdstrategy }; static sd_devsw_installed = 0; static void sd_devsw_install() { dev_t descript; if( ! sd_devsw_installed ) { descript = makedev(CDEV_MAJOR,0); cdevsw_add(&descript,&sd_cdevsw,NULL); #if defined(BDEV_MAJOR) descript = makedev(BDEV_MAJOR,0); bdevsw_add(&descript,&sd_bdevsw,NULL); #endif /*BDEV_MAJOR*/ sd_devsw_installed = 1; } } #endif /* JREMOD */
1995-11-28 09:42:06 +00:00
static fd_devsw_installed = 0;
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
static void fd_drvinit(void *notused )
the second set of changes in a move towards getting devices to be totally dynamic. this is only the devices in i386/isa I'll do more tomorrow. they're completely masked by #ifdef JREMOD at this stage... the eventual aim is that every driver will do a SYSINIT at startup BEFORE the probes, which will effectively link it into the devsw tables etc. If I'd thought about it more I'd have put that in in this set (damn) The ioconf lines generated by config will also end up in the device's own scope as well, so ioconf.c will eventually be gutted the SYSINIT call to the driver will include a phase where the driver links it's ioconf line into a chain of such. when this phase is done then the user can modify them with the boot: -c config menu if he wants, just like now.. config will put the config lines out in the .h file (e.g. in aha.h will be the addresses for the aha driver to look.) as I said this is a very small first step.. the aim of THIS set of edits is to not have to edit conf.c at all when adding a new device.. the tabe will be a simple skeleton.. when this is done, it will allow other changes to be made, all teh time still having a fully working kernel tree, but the logical outcome is the complete REMOVAL of the devsw tables. By the end of this, linked in drivers will be exactly the same as run-time loaded drivers, except they JUST HAPPEN to already be linked and present at startup.. the SYSINIT calls will be the equivalent of the "init" call made to a newly loaded driver in every respect. For this edit, each of the files has the following code inserted into it: obviously, tailored to suit.. ----------------------somewhere at the top: #ifdef JREMOD #include <sys/conf.h> #define CDEV_MAJOR 13 #define BDEV_MAJOR 4 static void sd_devsw_install(); #endif /*JREMOD */ ---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT #ifdef JREMOD sd_devsw_install(); #endif /*JREMOD*/ -----------------------at the bottom: #ifdef JREMOD struct bdevsw sd_bdevsw = { sdopen, sdclose, sdstrategy, sdioctl, /*4*/ sddump, sdsize, 0 }; struct cdevsw sd_cdevsw = { sdopen, sdclose, rawread, rawwrite, /*13*/ sdioctl, nostop, nullreset, nodevtotty,/* sd */ seltrue, nommap, sdstrategy }; static sd_devsw_installed = 0; static void sd_devsw_install() { dev_t descript; if( ! sd_devsw_installed ) { descript = makedev(CDEV_MAJOR,0); cdevsw_add(&descript,&sd_cdevsw,NULL); #if defined(BDEV_MAJOR) descript = makedev(BDEV_MAJOR,0); bdevsw_add(&descript,&sd_bdevsw,NULL); #endif /*BDEV_MAJOR*/ sd_devsw_installed = 1; } } #endif /* JREMOD */
1995-11-28 09:42:06 +00:00
{
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
the second set of changes in a move towards getting devices to be totally dynamic. this is only the devices in i386/isa I'll do more tomorrow. they're completely masked by #ifdef JREMOD at this stage... the eventual aim is that every driver will do a SYSINIT at startup BEFORE the probes, which will effectively link it into the devsw tables etc. If I'd thought about it more I'd have put that in in this set (damn) The ioconf lines generated by config will also end up in the device's own scope as well, so ioconf.c will eventually be gutted the SYSINIT call to the driver will include a phase where the driver links it's ioconf line into a chain of such. when this phase is done then the user can modify them with the boot: -c config menu if he wants, just like now.. config will put the config lines out in the .h file (e.g. in aha.h will be the addresses for the aha driver to look.) as I said this is a very small first step.. the aim of THIS set of edits is to not have to edit conf.c at all when adding a new device.. the tabe will be a simple skeleton.. when this is done, it will allow other changes to be made, all teh time still having a fully working kernel tree, but the logical outcome is the complete REMOVAL of the devsw tables. By the end of this, linked in drivers will be exactly the same as run-time loaded drivers, except they JUST HAPPEN to already be linked and present at startup.. the SYSINIT calls will be the equivalent of the "init" call made to a newly loaded driver in every respect. For this edit, each of the files has the following code inserted into it: obviously, tailored to suit.. ----------------------somewhere at the top: #ifdef JREMOD #include <sys/conf.h> #define CDEV_MAJOR 13 #define BDEV_MAJOR 4 static void sd_devsw_install(); #endif /*JREMOD */ ---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT #ifdef JREMOD sd_devsw_install(); #endif /*JREMOD*/ -----------------------at the bottom: #ifdef JREMOD struct bdevsw sd_bdevsw = { sdopen, sdclose, sdstrategy, sdioctl, /*4*/ sddump, sdsize, 0 }; struct cdevsw sd_cdevsw = { sdopen, sdclose, rawread, rawwrite, /*13*/ sdioctl, nostop, nullreset, nodevtotty,/* sd */ seltrue, nommap, sdstrategy }; static sd_devsw_installed = 0; static void sd_devsw_install() { dev_t descript; if( ! sd_devsw_installed ) { descript = makedev(CDEV_MAJOR,0); cdevsw_add(&descript,&sd_cdevsw,NULL); #if defined(BDEV_MAJOR) descript = makedev(BDEV_MAJOR,0); bdevsw_add(&descript,&sd_bdevsw,NULL); #endif /*BDEV_MAJOR*/ sd_devsw_installed = 1; } } #endif /* JREMOD */
1995-11-28 09:42:06 +00:00
if( ! fd_devsw_installed ) {
Make a "DWIM" function for adding [bc]devsw entries for bdev drivers. Saves about 280 butes of source per driver, 56 bytes in object size and another 56 bytes moves from data to bss. No functional change intended nor expected. GENERIC should be about one k smaller now :-)
1996-07-23 21:52:43 +00:00
bdevsw_add_generic(BDEV_MAJOR,CDEV_MAJOR, &fd_bdevsw);
the second set of changes in a move towards getting devices to be totally dynamic. this is only the devices in i386/isa I'll do more tomorrow. they're completely masked by #ifdef JREMOD at this stage... the eventual aim is that every driver will do a SYSINIT at startup BEFORE the probes, which will effectively link it into the devsw tables etc. If I'd thought about it more I'd have put that in in this set (damn) The ioconf lines generated by config will also end up in the device's own scope as well, so ioconf.c will eventually be gutted the SYSINIT call to the driver will include a phase where the driver links it's ioconf line into a chain of such. when this phase is done then the user can modify them with the boot: -c config menu if he wants, just like now.. config will put the config lines out in the .h file (e.g. in aha.h will be the addresses for the aha driver to look.) as I said this is a very small first step.. the aim of THIS set of edits is to not have to edit conf.c at all when adding a new device.. the tabe will be a simple skeleton.. when this is done, it will allow other changes to be made, all teh time still having a fully working kernel tree, but the logical outcome is the complete REMOVAL of the devsw tables. By the end of this, linked in drivers will be exactly the same as run-time loaded drivers, except they JUST HAPPEN to already be linked and present at startup.. the SYSINIT calls will be the equivalent of the "init" call made to a newly loaded driver in every respect. For this edit, each of the files has the following code inserted into it: obviously, tailored to suit.. ----------------------somewhere at the top: #ifdef JREMOD #include <sys/conf.h> #define CDEV_MAJOR 13 #define BDEV_MAJOR 4 static void sd_devsw_install(); #endif /*JREMOD */ ---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT #ifdef JREMOD sd_devsw_install(); #endif /*JREMOD*/ -----------------------at the bottom: #ifdef JREMOD struct bdevsw sd_bdevsw = { sdopen, sdclose, sdstrategy, sdioctl, /*4*/ sddump, sdsize, 0 }; struct cdevsw sd_cdevsw = { sdopen, sdclose, rawread, rawwrite, /*13*/ sdioctl, nostop, nullreset, nodevtotty,/* sd */ seltrue, nommap, sdstrategy }; static sd_devsw_installed = 0; static void sd_devsw_install() { dev_t descript; if( ! sd_devsw_installed ) { descript = makedev(CDEV_MAJOR,0); cdevsw_add(&descript,&sd_cdevsw,NULL); #if defined(BDEV_MAJOR) descript = makedev(BDEV_MAJOR,0); bdevsw_add(&descript,&sd_bdevsw,NULL); #endif /*BDEV_MAJOR*/ sd_devsw_installed = 1; } } #endif /* JREMOD */
1995-11-28 09:42:06 +00:00
fd_devsw_installed = 1;
}
}
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
SYSINIT(fddev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,fd_drvinit,NULL)
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#ifdef SLICE
static int
fdsopen(void *private, int flags, int mode, struct proc *p)
{
struct subdev *sd;
sd = private;
close() is no longer a SLICE method. Close is simply an open with no-read and no-write once internal to SLICE (it still exports a close to the rest of the kernel)
1998-04-22 10:25:27 +00:00
if((flags & (FREAD|FWRITE)) != 0) {
return(Fdopen(makedev(0,sd->minor), 0 , 0, p));
} else {
return(fdclose(makedev(0,sd->minor), 0 , 0, p));
}
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
}
close() is no longer a SLICE method. Close is simply an open with no-read and no-write once internal to SLICE (it still exports a close to the rest of the kernel)
1998-04-22 10:25:27 +00:00
#if 0
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
static void
fdsclose(void *private, int flags, int mode, struct proc *p)
{
struct subdev *sd;
sd = private;
fdclose(makedev(0,sd->minor), 0 , 0, p);
return ;
}
close() is no longer a SLICE method. Close is simply an open with no-read and no-write once internal to SLICE (it still exports a close to the rest of the kernel)
1998-04-22 10:25:27 +00:00
#endif /* 0 */
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
#endif /* SLICE */
Bruce's multifarious patches for the floppy driver (not well tested, but since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
#endif
Add changes and code to implement a functional DEVFS. This code will be turned on with the TWO options DEVFS and SLICE. (see LINT) Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes. /dev will be automatically mounted by init (thanks phk) on bootup. See /sys/dev/slice/slice.4 for more info. All code should act the same without these options enabled. Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others This code does not support the following: bad144 handling. Persistance. (My head is still hurting from the last time we discussed this) ATAPI flopies are not handled by the SLICE code yet. When this code is running, all major numbers are arbitrary and COULD be dynamically assigned. (this is not done, for POLA only) Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
Updated driver to the 1.1.5 version: date: 1994/05/22 12:35:38; author: joerg; state: Exp; lines: +6 -6 First round of floppy changes. Try making `fd' more robust. New features: . ioctl command for setting the drive type (density etc.); restricted to the super-user . ioctl for getting/seting `drive options'; currently only option is FDOPT_NORETRY: inhibit the usual retries; used when verifying a newly formatted track Fixes: . function prototypes . made all internal functions `static' . cleaned up & corrected .h files . restructured, to make the chaotic function sequence more rational . compiled with -Wall, and cleared all warnings . introduced a mirror for the (write-only) `digital output register', to avoid the current kludge . device probing completed by seeking/recalibrating, and looking for track 0 being found . holding the controller down in reset state while it is idle (and thus saving allot of headaches) . make requests fail that are not a multiple of the (physical) sector size . removed the fixed physical sector size (512 bytes), allowing for any size the controller could handle (128/256/512/1024 bytes) . replaced some silly messages . fixed the TRACE* macro usage, debugging reports should be complete now again (debugging output is HUGE! though) . removed fd_timeout for SEEK command; seeks are always reported by the controller to succeed, since the `success' only refers to the controller's idea of success - there is no hardware line to tell about the seek end (other than the `track 0' line) . catch SENSEI's that report about a `terminated due to READY changed' status - could happen after a controller reset . converted ``hz / <something>'' divide operations to divisors that are powers of two, so gcc can optimize them into shifts . write/format operations are checked against a write-protected medium now *prior* starting the operation . error reports of `invalid command' and `wrong cylinder' will cause shortcuts in the retrier() now . fixed a bug in the retrier() causing bogus block numbers to be reported . fdformat() does care for errors now Known Bugs: . no attempts have been made (yet) to improve the performance . sometimes, bogus ``seek/recalib failed'' messages are logged; this is still a bug in the driver, but it's not harmful since it's usually caught by the retrier() Reviewed by: Submitted by: Obtained from:
1994-09-17 16:56:10 +00:00
/*
* Hello emacs, these are the
* Local Variables:
* c-indent-level: 8
* c-continued-statement-offset: 8
* c-continued-brace-offset: 0
* c-brace-offset: -8
* c-brace-imaginary-offset: 0
* c-argdecl-indent: 8
* c-label-offset: -8
* c++-hanging-braces: 1
* c++-access-specifier-offset: -8
* c++-empty-arglist-indent: 8
* c++-friend-offset: 0
* End:
*/
Reference in New Issue Copy Permalink