freebsd-nq/sys/powerpc/mpc85xx/lbc.h

141 lines
4.8 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2006-2008, Juniper Networks, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MACHINE_LBC_H_
#define _MACHINE_LBC_H_
/* Maximum number of devices on Local Bus */
#define LBC_DEV_MAX 8
/* Local access registers */
#define LBC85XX_BR(n) (0x0 + (8 * n)) /* Base register 0-7 */
#define LBC85XX_OR(n) (0x4 + (8 * n)) /* Options register 0-7 */
#define LBC85XX_MAR 0x068 /* UPM address register */
#define LBC85XX_MAMR 0x070 /* UPMA mode register */
#define LBC85XX_MBMR 0x074 /* UPMB mode register */
#define LBC85XX_MCMR 0x078 /* UPMC mode register */
#define LBC85XX_MRTPR 0x084 /* Memory refresh timer prescaler */
#define LBC85XX_MDR 0x088 /* UPM data register */
#define LBC85XX_LSOR 0x090 /* Special operation initiation */
#define LBC85XX_LURT 0x0a0 /* UPM refresh timer */
#define LBC85XX_LSRT 0x0a4 /* SDRAM refresh timer */
#define LBC85XX_LTESR 0x0b0 /* Transfer error status register */
#define LBC85XX_LTEDR 0x0b4 /* Transfer error disable register */
#define LBC85XX_LTEIR 0x0b8 /* Transfer error interrupt register */
#define LBC85XX_LTEATR 0x0bc /* Transfer error attributes register */
#define LBC85XX_LTEAR 0x0c0 /* Transfer error address register */
#define LBC85XX_LTECCR 0x0c4 /* Transfer error ECC register */
#define LBC85XX_LBCR 0x0d0 /* Configuration register */
#define LBC85XX_LCRR 0x0d4 /* Clock ratio register */
#define LBC85XX_FMR 0x0e0 /* Flash mode register */
#define LBC85XX_FIR 0x0e4 /* Flash instruction register */
#define LBC85XX_FCR 0x0e8 /* Flash command register */
#define LBC85XX_FBAR 0x0ec /* Flash block address register */
#define LBC85XX_FPAR 0x0f0 /* Flash page address register */
#define LBC85XX_FBCR 0x0f4 /* Flash byte count register */
#define LBC85XX_FECC0 0x100 /* Flash ECC block 0 register */
#define LBC85XX_FECC1 0x104 /* Flash ECC block 0 register */
#define LBC85XX_FECC2 0x108 /* Flash ECC block 0 register */
#define LBC85XX_FECC3 0x10c /* Flash ECC block 0 register */
/* LBC machine select */
#define LBCRES_MSEL_GPCM 0
#define LBCRES_MSEL_FCM 1
#define LBCRES_MSEL_UPMA 8
#define LBCRES_MSEL_UPMB 9
#define LBCRES_MSEL_UPMC 10
/* LBC data error checking modes */
#define LBCRES_DECC_DISABLED 0
#define LBCRES_DECC_NORMAL 1
#define LBCRES_DECC_RMW 2
/* LBC atomic operation modes */
#define LBCRES_ATOM_DISABLED 0
#define LBCRES_ATOM_RAWA 1
#define LBCRES_ATOM_WARA 2
struct lbc_memrange {
vm_paddr_t addr;
vm_size_t size;
vm_offset_t kva;
};
struct lbc_bank {
vm_paddr_t addr; /* physical addr of the bank */
vm_size_t size; /* bank size */
vm_offset_t kva; /* VA of the bank */
/*
* XXX the following bank attributes do not have properties specified
* in the LBC DTS bindings yet (11.2009), so they are mainly a
* placeholder for future extensions.
*/
int width; /* data bus width */
uint8_t msel; /* machine select */
uint8_t atom; /* atomic op mode */
uint8_t wp; /* write protect */
uint8_t decc; /* data error checking */
};
struct lbc_softc {
device_t sc_dev;
struct resource *sc_mres;
bus_space_handle_t sc_bsh;
bus_space_tag_t sc_bst;
int sc_mrid;
int sc_irid;
struct resource *sc_ires;
void *sc_icookie;
struct rman sc_rman;
int sc_addr_cells;
int sc_size_cells;
struct lbc_memrange sc_range[LBC_DEV_MAX];
struct lbc_bank sc_banks[LBC_DEV_MAX];
uint32_t sc_ltesr;
};
struct lbc_devinfo {
struct ofw_bus_devinfo di_ofw;
struct resource_list di_res;
int di_bank;
};
uint32_t lbc_read_reg(device_t child, u_int off);
void lbc_write_reg(device_t child, u_int off, uint32_t val);
#endif /* _MACHINE_LBC_H_ */