freebsd-nq/sys/fs/procfs/procfs_ctl.c

359 lines
8.9 KiB
C
Raw Normal View History

/*-
1994-05-24 10:09:53 +00:00
* Copyright (c) 1993 Jan-Simon Pendry
* Copyright (c) 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Jan-Simon Pendry.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)procfs_ctl.c 8.4 (Berkeley) 6/15/94
*
* From:
* $Id: procfs_ctl.c,v 1.51 2003/12/07 17:40:00 des Exp $
1999-08-28 01:08:13 +00:00
* $FreeBSD$
1994-05-24 10:09:53 +00:00
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/lock.h>
#include <sys/mutex.h>
1994-05-24 10:09:53 +00:00
#include <sys/proc.h>
#include <sys/ptrace.h>
2001-12-04 01:35:06 +00:00
#include <sys/sbuf.h>
#include <sys/signalvar.h>
#include <sys/sx.h>
2001-12-04 01:35:06 +00:00
#include <sys/uio.h>
2001-12-04 01:35:06 +00:00
#include <fs/pseudofs/pseudofs.h>
#include <fs/procfs/procfs.h>
1994-05-24 10:09:53 +00:00
#include <vm/vm.h>
1994-05-24 10:09:53 +00:00
/*
* True iff process (p) is in trace wait state
* relative to process (curp)
*/
#define TRACE_WAIT_P(curp, p) \
(P_SHOULDSTOP(p) && \
1994-05-24 10:09:53 +00:00
(p)->p_pptr == (curp) && \
((p)->p_flag & P_TRACED))
#define PROCFS_CTL_ATTACH 1
#define PROCFS_CTL_DETACH 2
#define PROCFS_CTL_STEP 3
#define PROCFS_CTL_RUN 4
#define PROCFS_CTL_WAIT 5
2001-12-04 01:35:06 +00:00
struct namemap {
const char *nm_name;
int nm_val;
};
static struct namemap ctlnames[] = {
1994-05-24 10:09:53 +00:00
/* special /proc commands */
{ "attach", PROCFS_CTL_ATTACH },
{ "detach", PROCFS_CTL_DETACH },
{ "step", PROCFS_CTL_STEP },
{ "run", PROCFS_CTL_RUN },
{ "wait", PROCFS_CTL_WAIT },
{ 0 },
};
2001-12-04 01:35:06 +00:00
static struct namemap signames[] = {
1994-05-24 10:09:53 +00:00
/* regular signal names */
{ "hup", SIGHUP }, { "int", SIGINT },
{ "quit", SIGQUIT }, { "ill", SIGILL },
{ "trap", SIGTRAP }, { "abrt", SIGABRT },
{ "iot", SIGIOT }, { "emt", SIGEMT },
{ "fpe", SIGFPE }, { "kill", SIGKILL },
{ "bus", SIGBUS }, { "segv", SIGSEGV },
{ "sys", SIGSYS }, { "pipe", SIGPIPE },
{ "alrm", SIGALRM }, { "term", SIGTERM },
{ "urg", SIGURG }, { "stop", SIGSTOP },
{ "tstp", SIGTSTP }, { "cont", SIGCONT },
{ "chld", SIGCHLD }, { "ttin", SIGTTIN },
{ "ttou", SIGTTOU }, { "io", SIGIO },
{ "xcpu", SIGXCPU }, { "xfsz", SIGXFSZ },
{ "vtalrm", SIGVTALRM }, { "prof", SIGPROF },
{ "winch", SIGWINCH }, { "info", SIGINFO },
{ "usr1", SIGUSR1 }, { "usr2", SIGUSR2 },
{ 0 },
};
static int procfs_control(struct thread *td, struct proc *p, int op);
1994-05-24 10:09:53 +00:00
static int
procfs_control(struct thread *td, struct proc *p, int op)
1994-05-24 10:09:53 +00:00
{
int error = 0;
1994-05-24 10:09:53 +00:00
/*
* Attach - attaches the target process for debugging
* by the calling process.
*/
if (op == PROCFS_CTL_ATTACH) {
sx_xlock(&proctree_lock);
PROC_LOCK(p);
if ((error = p_candebug(td, p)) != 0)
goto out;
if (p->p_flag & P_TRACED) {
error = EBUSY;
goto out;
}
1994-05-24 10:09:53 +00:00
/* Can't trace yourself! */
if (p->p_pid == td->td_proc->p_pid) {
error = EINVAL;
goto out;
}
1994-05-24 10:09:53 +00:00
/*
* Go ahead and set the trace flag.
* Save the old parent (it's reset in
* _DETACH, and also in kern_exit.c:wait4()
* Reparent the process so that the tracing
* proc gets to see all the action.
* Stop the target.
*/
p->p_flag |= P_TRACED;
faultin(p);
1994-05-24 10:09:53 +00:00
p->p_xstat = 0; /* XXX ? */
if (p->p_pptr != td->td_proc) {
1994-05-24 10:09:53 +00:00
p->p_oppid = p->p_pptr->p_pid;
proc_reparent(p, td->td_proc);
1994-05-24 10:09:53 +00:00
}
psignal(p, SIGSTOP);
out:
PROC_UNLOCK(p);
sx_xunlock(&proctree_lock);
return (error);
1994-05-24 10:09:53 +00:00
}
/*
* Authorization check: rely on normal debugging protection, except
* allow processes to disengage debugging on a process onto which
* they have previously attached, but no longer have permission to
* debug.
*/
PROC_LOCK(p);
if (op != PROCFS_CTL_DETACH &&
((error = p_candebug(td, p)))) {
PROC_UNLOCK(p);
return (error);
}
/*
* Target process must be stopped, owned by (td) and
1994-05-24 10:09:53 +00:00
* be set up for tracing (P_TRACED flag set).
* Allow DETACH to take place at any time for sanity.
* Allow WAIT any time, of course.
*/
switch (op) {
case PROCFS_CTL_DETACH:
case PROCFS_CTL_WAIT:
break;
default:
if (!TRACE_WAIT_P(td->td_proc, p)) {
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
return (EBUSY);
}
1994-05-24 10:09:53 +00:00
}
#ifdef FIX_SSTEP
1994-05-24 10:09:53 +00:00
/*
* do single-step fixup if needed
*/
FIX_SSTEP(FIRST_THREAD_IN_PROC(p)); /* XXXKSE */
#endif
1994-05-24 10:09:53 +00:00
/*
* Don't deliver any signal by default.
* To continue with a signal, just send
* the signal name to the ctl file
*/
p->p_xstat = 0;
switch (op) {
/*
* Detach. Cleans up the target process, reparent it if possible
* and set it running once more.
*/
case PROCFS_CTL_DETACH:
/* if not being traced, then this is a painless no-op */
if ((p->p_flag & P_TRACED) == 0) {
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
return (0);
}
1994-05-24 10:09:53 +00:00
/* not being traced any more */
p->p_flag &= ~P_TRACED;
/* remove pending SIGTRAP, else the process will die */
1. Change prototype of trapsignal and sendsig to use ksiginfo_t *, most changes in MD code are trivial, before this change, trapsignal and sendsig use discrete parameters, now they uses member fields of ksiginfo_t structure. For sendsig, this change allows us to pass POSIX realtime signal value to user code. 2. Remove cpu_thread_siginfo, it is no longer needed because we now always generate ksiginfo_t data and feed it to libpthread. 3. Add p_sigqueue to proc structure to hold shared signals which were blocked by all threads in the proc. 4. Add td_sigqueue to thread structure to hold all signals delivered to thread. 5. i386 and amd64 now return POSIX standard si_code, other arches will be fixed. 6. In this sigqueue implementation, pending signal set is kept as before, an extra siginfo list holds additional siginfo_t data for signals. kernel code uses psignal() still behavior as before, it won't be failed even under memory pressure, only exception is when deleting a signal, we should call sigqueue_delete to remove signal from sigqueue but not SIGDELSET. Current there is no kernel code will deliver a signal with additional data, so kernel should be as stable as before, a ksiginfo can carry more information, for example, allow signal to be delivered but throw away siginfo data if memory is not enough. SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can not be caught or masked. The sigqueue() syscall allows user code to queue a signal to target process, if resource is unavailable, EAGAIN will be returned as specification said. Just before thread exits, signal queue memory will be freed by sigqueue_flush. Current, all signals are allowed to be queued, not only realtime signals. Earlier patch reviewed by: jhb, deischen Tested on: i386, amd64
2005-10-14 12:43:47 +00:00
sigqueue_delete_proc(p, SIGTRAP);
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
/* give process back to original parent */
sx_xlock(&proctree_lock);
1994-05-24 10:09:53 +00:00
if (p->p_oppid != p->p_pptr->p_pid) {
struct proc *pp;
pp = pfind(p->p_oppid);
PROC_LOCK(p);
if (pp) {
PROC_UNLOCK(pp);
1994-05-24 10:09:53 +00:00
proc_reparent(p, pp);
}
} else
PROC_LOCK(p);
1994-05-24 10:09:53 +00:00
p->p_oppid = 0;
p->p_flag &= ~P_WAITED; /* XXX ? */
PROC_UNLOCK(p);
sx_xunlock(&proctree_lock);
wakeup(td->td_proc); /* XXX for CTL_WAIT below ? */
1994-05-24 10:09:53 +00:00
break;
/*
* Step. Let the target process execute a single instruction.
2003-12-07 17:40:00 +00:00
* What does it mean to single step a threaded program?
1994-05-24 10:09:53 +00:00
*/
case PROCFS_CTL_STEP:
error = proc_sstep(FIRST_THREAD_IN_PROC(p)); /* XXXKSE */
PROC_UNLOCK(p);
if (error)
return (error);
1994-05-24 10:09:53 +00:00
break;
/*
* Run. Let the target process continue running until a breakpoint
* or some other trap.
*/
case PROCFS_CTL_RUN:
p->p_flag &= ~P_STOPPED_SIG; /* this uses SIGSTOP */
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
break;
/*
* Wait for the target process to stop.
* If the target is not being traced then just wait
* to enter
*/
case PROCFS_CTL_WAIT:
if (p->p_flag & P_TRACED) {
while (error == 0 &&
(P_SHOULDSTOP(p)) &&
1994-05-24 10:09:53 +00:00
(p->p_flag & P_TRACED) &&
(p->p_pptr == td->td_proc))
error = msleep(p, &p->p_mtx,
1994-05-24 10:09:53 +00:00
PWAIT|PCATCH, "procfsx", 0);
if (error == 0 && !TRACE_WAIT_P(td->td_proc, p))
1994-05-24 10:09:53 +00:00
error = EBUSY;
} else {
while (error == 0 && P_SHOULDSTOP(p))
error = msleep(p, &p->p_mtx,
1994-05-24 10:09:53 +00:00
PWAIT|PCATCH, "procfs", 0);
}
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
return (error);
default:
panic("procfs_control");
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock_spin(&sched_lock);
thread_unsuspend(p); /* If it can run, let it do so. */
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock_spin(&sched_lock);
1994-05-24 10:09:53 +00:00
return (0);
}
2001-12-04 01:35:06 +00:00
static struct namemap *
findname(struct namemap *nm, char *buf, int buflen)
{
for (; nm->nm_name; nm++)
if (bcmp(buf, nm->nm_name, buflen+1) == 0)
return (nm);
return (0);
}
1994-05-24 10:09:53 +00:00
int
2001-12-04 01:35:06 +00:00
procfs_doprocctl(PFS_FILL_ARGS)
1994-05-24 10:09:53 +00:00
{
int error;
2001-12-04 01:35:06 +00:00
struct namemap *nm;
1994-05-24 10:09:53 +00:00
2001-12-04 01:35:06 +00:00
if (uio == NULL || uio->uio_rw != UIO_WRITE)
1994-05-24 10:09:53 +00:00
return (EOPNOTSUPP);
/*
* Map signal names into signal generation
* or debug control. Unknown commands and/or signals
* return EOPNOTSUPP.
*
* Sending a signal while the process is being debugged
* also has the side effect of letting the target continue
* to run. There is no way to single-step a signal delivery.
*/
error = EOPNOTSUPP;
2001-12-04 01:35:06 +00:00
sbuf_trim(sb);
sbuf_finish(sb);
nm = findname(ctlnames, sbuf_data(sb), sbuf_len(sb));
1994-05-24 10:09:53 +00:00
if (nm) {
2001-12-04 01:35:06 +00:00
printf("procfs: got a %s command\n", sbuf_data(sb));
error = procfs_control(td, p, nm->nm_val);
1994-05-24 10:09:53 +00:00
} else {
2001-12-04 01:35:06 +00:00
nm = findname(signames, sbuf_data(sb), sbuf_len(sb));
1994-05-24 10:09:53 +00:00
if (nm) {
2001-12-04 01:35:06 +00:00
printf("procfs: got a sig%s\n", sbuf_data(sb));
PROC_LOCK(p);
/* This is very broken XXXKSE: */
2001-12-04 01:35:06 +00:00
if (TRACE_WAIT_P(td->td_proc, p)) {
1994-05-24 10:09:53 +00:00
p->p_xstat = nm->nm_val;
#ifdef FIX_SSTEP
/* XXXKSE: */
FIX_SSTEP(FIRST_THREAD_IN_PROC(p));
#endif
/* XXXKSE: */
p->p_flag &= ~P_STOPPED_SIG;
mtx_lock_spin(&sched_lock);
thread_unsuspend(p);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock_spin(&sched_lock);
} else
1994-05-24 10:09:53 +00:00
psignal(p, nm->nm_val);
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
error = 0;
}
}
return (error);
}