freebsd-nq/sys/netatalk/aarp.c

692 lines
18 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2004-2005 Robert N. M. Watson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*-
* Copyright (c) 1990,1991,1994 Regents of The University of Michigan.
* All Rights Reserved.
*
* Permission to use, copy, modify, and distribute this software and
* its documentation for any purpose and without fee is hereby granted,
* provided that the above copyright notice appears in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation, and that the name of The University
* of Michigan not be used in advertising or publicity pertaining to
* distribution of the software without specific, written prior
* permission. This software is supplied as is without expressed or
* implied warranties of any kind.
*
* This product includes software developed by the University of
* California, Berkeley and its contributors.
*
* Research Systems Unix Group
* The University of Michigan
* c/o Wesley Craig
* 535 W. William Street
* Ann Arbor, Michigan
* +1-313-764-2278
* netatalk@umich.edu
*
* $FreeBSD$
*/
#include "opt_atalk.h"
#include "opt_mac.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mac.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
1997-09-07 08:30:24 +00:00
#include <sys/socket.h>
#include <sys/syslog.h>
#include <net/if.h>
1997-09-07 08:30:24 +00:00
#include <netinet/in.h>
#undef s_net
#include <netinet/if_ether.h>
#include <netatalk/at.h>
#include <netatalk/at_var.h>
#include <netatalk/aarp.h>
#include <netatalk/phase2.h>
#include <netatalk/at_extern.h>
static void aarptfree(struct aarptab *aat);
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
static void at_aarpinput(struct ifnet *ifp, struct mbuf *m);
#define AARPTAB_BSIZ 9
#define AARPTAB_NB 19
#define AARPTAB_SIZE (AARPTAB_BSIZ * AARPTAB_NB)
1998-02-09 06:11:36 +00:00
static struct aarptab aarptab[AARPTAB_SIZE];
struct mtx aarptab_mtx;
MTX_SYSINIT(aarptab_mtx, &aarptab_mtx, "aarptab_mtx", MTX_DEF);
#define AARPTAB_HASH(a) \
((((a).s_net << 8) + (a).s_node) % AARPTAB_NB)
#define AARPTAB_LOOK(aat, addr) { \
int n; \
AARPTAB_LOCK_ASSERT(); \
aat = &aarptab[ AARPTAB_HASH(addr) * AARPTAB_BSIZ ]; \
for (n = 0; n < AARPTAB_BSIZ; n++, aat++) \
if (aat->aat_ataddr.s_net == (addr).s_net && \
aat->aat_ataddr.s_node == (addr).s_node) \
break; \
if (n >= AARPTAB_BSIZ) \
aat = NULL; \
}
#define AARPT_AGE (60 * 1)
#define AARPT_KILLC 20
#define AARPT_KILLI 3
# if !defined(__FreeBSD__)
extern u_char etherbroadcastaddr[6];
2002-05-24 06:11:07 +00:00
# endif /* __FreeBSD__ */
static const u_char atmulticastaddr[ 6 ] = {
0x09, 0x00, 0x07, 0xff, 0xff, 0xff,
};
u_char at_org_code[ 3 ] = {
0x08, 0x00, 0x07,
};
const u_char aarp_org_code[ 3 ] = {
0x00, 0x00, 0x00,
};
1997-09-21 22:02:25 +00:00
static struct callout_handle aarptimer_ch =
CALLOUT_HANDLE_INITIALIZER(&aarptimer_ch);
static void
aarptimer(void *ignored)
{
struct aarptab *aat;
int i;
aarptimer_ch = timeout(aarptimer, (caddr_t)0, AARPT_AGE * hz);
aat = aarptab;
AARPTAB_LOCK();
for (i = 0; i < AARPTAB_SIZE; i++, aat++) {
if (aat->aat_flags == 0 || (aat->aat_flags & ATF_PERM))
continue;
if (++aat->aat_timer < ((aat->aat_flags & ATF_COM) ?
AARPT_KILLC : AARPT_KILLI))
continue;
aarptfree(aat);
}
AARPTAB_UNLOCK();
}
/*
* search through the network addresses to find one that includes
* the given network.. remember to take netranges into
* consideration.
*/
struct at_ifaddr *
at_ifawithnet(struct sockaddr_at *sat)
{
struct at_ifaddr *aa;
struct sockaddr_at *sat2;
for (aa = at_ifaddr_list; aa != NULL; aa = aa->aa_next) {
sat2 = &(aa->aa_addr);
if (sat2->sat_addr.s_net == sat->sat_addr.s_net) {
break;
}
if((aa->aa_flags & AFA_PHASE2)
&& (ntohs(aa->aa_firstnet) <= ntohs(sat->sat_addr.s_net))
&& (ntohs(aa->aa_lastnet) >= ntohs(sat->sat_addr.s_net))) {
break;
}
}
return (aa);
}
static void
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
aarpwhohas(struct ifnet *ifp, struct sockaddr_at *sat)
{
struct mbuf *m;
struct ether_header *eh;
struct ether_aarp *ea;
struct at_ifaddr *aa;
struct llc *llc;
struct sockaddr sa;
AARPTAB_UNLOCK_ASSERT();
if ((m = m_gethdr(M_DONTWAIT, MT_DATA)) == NULL) {
return;
}
#ifdef MAC
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
mac_create_mbuf_linklayer(ifp, m);
#endif
m->m_len = sizeof(*ea);
m->m_pkthdr.len = sizeof(*ea);
MH_ALIGN(m, sizeof(*ea));
ea = mtod(m, struct ether_aarp *);
bzero((caddr_t)ea, sizeof(*ea));
ea->aarp_hrd = htons(AARPHRD_ETHER);
ea->aarp_pro = htons(ETHERTYPE_AT);
ea->aarp_hln = sizeof(ea->aarp_sha);
ea->aarp_pln = sizeof(ea->aarp_spu);
ea->aarp_op = htons(AARPOP_REQUEST);
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
bcopy(IFP2AC(ifp)->ac_enaddr, (caddr_t)ea->aarp_sha,
sizeof(ea->aarp_sha));
/*
* We need to check whether the output ethernet type should
* be phase 1 or 2. We have the interface that we'll be sending
* the aarp out. We need to find an AppleTalk network on that
* interface with the same address as we're looking for. If the
* net is phase 2, generate an 802.2 and SNAP header.
*/
if ((aa = at_ifawithnet(sat)) == NULL) {
m_freem(m);
return;
}
eh = (struct ether_header *)sa.sa_data;
if (aa->aa_flags & AFA_PHASE2) {
bcopy(atmulticastaddr, eh->ether_dhost, sizeof(eh->ether_dhost));
eh->ether_type = htons(sizeof(struct llc) + sizeof(struct ether_aarp));
M_PREPEND(m, sizeof(struct llc), M_DONTWAIT);
if (m == NULL) {
return;
}
llc = mtod(m, struct llc *);
llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP;
llc->llc_control = LLC_UI;
bcopy(aarp_org_code, llc->llc_org_code, sizeof(aarp_org_code));
llc->llc_ether_type = htons(ETHERTYPE_AARP);
bcopy(&AA_SAT(aa)->sat_addr.s_net, ea->aarp_spnet,
sizeof(ea->aarp_spnet));
bcopy(&sat->sat_addr.s_net, ea->aarp_tpnet,
sizeof(ea->aarp_tpnet));
ea->aarp_spnode = AA_SAT(aa)->sat_addr.s_node;
ea->aarp_tpnode = sat->sat_addr.s_node;
} else {
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
bcopy(ifp->if_broadcastaddr, (caddr_t)eh->ether_dhost,
sizeof(eh->ether_dhost));
eh->ether_type = htons(ETHERTYPE_AARP);
ea->aarp_spa = AA_SAT(aa)->sat_addr.s_node;
ea->aarp_tpa = sat->sat_addr.s_node;
}
#ifdef NETATALKDEBUG
printf("aarp: sending request for %u.%u\n",
ntohs(AA_SAT(aa)->sat_addr.s_net),
AA_SAT(aa)->sat_addr.s_node);
#endif /* NETATALKDEBUG */
sa.sa_len = sizeof(struct sockaddr);
sa.sa_family = AF_UNSPEC;
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
ifp->if_output(ifp, m, &sa, NULL /* route */);
}
int
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
aarpresolve(ifp, m, destsat, desten)
struct ifnet *ifp;
struct mbuf *m;
struct sockaddr_at *destsat;
u_char *desten;
{
struct at_ifaddr *aa;
struct aarptab *aat;
if (at_broadcast(destsat)) {
m->m_flags |= M_BCAST;
if ((aa = at_ifawithnet(destsat)) == NULL) {
m_freem(m);
return (0);
}
if (aa->aa_flags & AFA_PHASE2) {
bcopy(atmulticastaddr, (caddr_t)desten, sizeof(atmulticastaddr));
} else {
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
bcopy(ifp->if_broadcastaddr, (caddr_t)desten,
sizeof(ifp->if_addrlen));
}
return (1);
}
AARPTAB_LOCK();
AARPTAB_LOOK(aat, destsat->sat_addr);
if (aat == NULL) { /* No entry */
aat = aarptnew(&destsat->sat_addr);
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
if (aat == NULL) { /* we should fail more gracefully! */
panic("aarpresolve: no free entry");
}
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
goto done;
}
/* found an entry */
aat->aat_timer = 0;
if (aat->aat_flags & ATF_COM) { /* entry is COMplete */
bcopy((caddr_t)aat->aat_enaddr, (caddr_t)desten,
sizeof(aat->aat_enaddr));
AARPTAB_UNLOCK();
return (1);
}
/* entry has not completed */
if (aat->aat_hold) {
m_freem(aat->aat_hold);
}
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
done:
aat->aat_hold = m;
AARPTAB_UNLOCK();
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
aarpwhohas(ifp, destsat);
return (0);
}
void
aarpintr(m)
struct mbuf *m;
{
struct arphdr *ar;
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
struct ifnet *ifp;
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
ifp = m->m_pkthdr.rcvif;
if (ifp->if_flags & IFF_NOARP)
goto out;
if (m->m_len < sizeof(struct arphdr)) {
goto out;
}
ar = mtod(m, struct arphdr *);
if (ntohs(ar->ar_hrd) != AARPHRD_ETHER) {
goto out;
}
if (m->m_len < sizeof(struct arphdr) + 2 * ar->ar_hln +
2 * ar->ar_pln) {
goto out;
}
switch(ntohs(ar->ar_pro)) {
case ETHERTYPE_AT :
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
at_aarpinput(ifp, m);
return;
default:
break;
}
out:
m_freem(m);
}
static void
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
at_aarpinput(struct ifnet *ifp, struct mbuf *m)
{
struct ether_aarp *ea;
struct at_ifaddr *aa;
struct aarptab *aat;
struct ether_header *eh;
struct llc *llc;
struct sockaddr_at sat;
struct sockaddr sa;
struct at_addr spa, tpa, ma;
int op;
u_short net;
ea = mtod(m, struct ether_aarp *);
/* Check to see if from my hardware address */
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
if (!bcmp((caddr_t)ea->aarp_sha, IFP2AC(ifp)->ac_enaddr,
sizeof(IFP2AC(ifp)->ac_enaddr))) {
m_freem(m);
return;
}
op = ntohs(ea->aarp_op);
bcopy(ea->aarp_tpnet, &net, sizeof(net));
if (net != 0) { /* should be ATADDR_ANYNET? */
sat.sat_len = sizeof(struct sockaddr_at);
sat.sat_family = AF_APPLETALK;
sat.sat_addr.s_net = net;
if ((aa = at_ifawithnet(&sat)) == NULL) {
m_freem(m);
return;
}
bcopy(ea->aarp_spnet, &spa.s_net, sizeof(spa.s_net));
bcopy(ea->aarp_tpnet, &tpa.s_net, sizeof(tpa.s_net));
} else {
/*
* Since we don't know the net, we just look for the first
* phase 1 address on the interface.
*/
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
for (aa = (struct at_ifaddr *)TAILQ_FIRST(&ifp->if_addrhead); aa;
aa = (struct at_ifaddr *)aa->aa_ifa.ifa_link.tqe_next) {
if (AA_SAT(aa)->sat_family == AF_APPLETALK &&
(aa->aa_flags & AFA_PHASE2) == 0) {
break;
}
}
if (aa == NULL) {
m_freem(m);
return;
}
tpa.s_net = spa.s_net = AA_SAT(aa)->sat_addr.s_net;
}
spa.s_node = ea->aarp_spnode;
tpa.s_node = ea->aarp_tpnode;
ma.s_net = AA_SAT(aa)->sat_addr.s_net;
ma.s_node = AA_SAT(aa)->sat_addr.s_node;
/*
* This looks like it's from us.
*/
if (spa.s_net == ma.s_net && spa.s_node == ma.s_node) {
if (aa->aa_flags & AFA_PROBING) {
/*
* We're probing, someone either responded to our probe, or
* probed for the same address we'd like to use. Change the
* address we're probing for.
*/
callout_stop(&aa->aa_callout);
wakeup(aa);
m_freem(m);
return;
} else if (op != AARPOP_PROBE) {
/*
* This is not a probe, and we're not probing. This means
* that someone's saying they have the same source address
* as the one we're using. Get upset...
*/
log(LOG_ERR,
"aarp: duplicate AT address!! %x:%x:%x:%x:%x:%x\n",
ea->aarp_sha[ 0 ], ea->aarp_sha[ 1 ], ea->aarp_sha[ 2 ],
ea->aarp_sha[ 3 ], ea->aarp_sha[ 4 ], ea->aarp_sha[ 5 ]);
m_freem(m);
return;
}
}
AARPTAB_LOCK();
AARPTAB_LOOK(aat, spa);
if (aat != NULL) {
if (op == AARPOP_PROBE) {
/*
* Someone's probing for spa, dealocate the one we've got,
* so that if the prober keeps the address, we'll be able
* to arp for him.
*/
aarptfree(aat);
AARPTAB_UNLOCK();
m_freem(m);
return;
}
bcopy((caddr_t)ea->aarp_sha, (caddr_t)aat->aat_enaddr,
sizeof(ea->aarp_sha));
aat->aat_flags |= ATF_COM;
if (aat->aat_hold) {
struct mbuf *mhold = aat->aat_hold;
aat->aat_hold = NULL;
AARPTAB_UNLOCK();
sat.sat_len = sizeof(struct sockaddr_at);
sat.sat_family = AF_APPLETALK;
sat.sat_addr = spa;
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
(*ifp->if_output)(ifp, mhold,
(struct sockaddr *)&sat, NULL); /* XXX */
} else
AARPTAB_UNLOCK();
} else if ((tpa.s_net == ma.s_net)
&& (tpa.s_node == ma.s_node)
&& (op != AARPOP_PROBE)
&& ((aat = aarptnew(&spa)) != NULL)) {
bcopy((caddr_t)ea->aarp_sha, (caddr_t)aat->aat_enaddr,
sizeof(ea->aarp_sha));
aat->aat_flags |= ATF_COM;
AARPTAB_UNLOCK();
} else
AARPTAB_UNLOCK();
/*
* Don't respond to responses, and never respond if we're
* still probing.
*/
if (tpa.s_net != ma.s_net || tpa.s_node != ma.s_node ||
op == AARPOP_RESPONSE || (aa->aa_flags & AFA_PROBING)) {
m_freem(m);
return;
}
bcopy((caddr_t)ea->aarp_sha, (caddr_t)ea->aarp_tha,
sizeof(ea->aarp_sha));
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
bcopy(IFP2AC(ifp)->ac_enaddr, (caddr_t)ea->aarp_sha,
sizeof(ea->aarp_sha));
/* XXX */
eh = (struct ether_header *)sa.sa_data;
bcopy((caddr_t)ea->aarp_tha, (caddr_t)eh->ether_dhost,
sizeof(eh->ether_dhost));
if (aa->aa_flags & AFA_PHASE2) {
eh->ether_type = htons(sizeof(struct llc) +
sizeof(struct ether_aarp));
M_PREPEND(m, sizeof(struct llc), M_DONTWAIT);
if (m == NULL) {
return;
}
llc = mtod(m, struct llc *);
llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP;
llc->llc_control = LLC_UI;
bcopy(aarp_org_code, llc->llc_org_code, sizeof(aarp_org_code));
llc->llc_ether_type = htons(ETHERTYPE_AARP);
bcopy(ea->aarp_spnet, ea->aarp_tpnet, sizeof(ea->aarp_tpnet));
bcopy(&ma.s_net, ea->aarp_spnet, sizeof(ea->aarp_spnet));
} else {
eh->ether_type = htons(ETHERTYPE_AARP);
}
ea->aarp_tpnode = ea->aarp_spnode;
ea->aarp_spnode = ma.s_node;
ea->aarp_op = htons(AARPOP_RESPONSE);
sa.sa_len = sizeof(struct sockaddr);
sa.sa_family = AF_UNSPEC;
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
(*ifp->if_output)(ifp, m, &sa, NULL); /* XXX */
return;
}
static void
aarptfree(struct aarptab *aat)
{
AARPTAB_LOCK_ASSERT();
if (aat->aat_hold)
m_freem(aat->aat_hold);
aat->aat_hold = NULL;
aat->aat_timer = aat->aat_flags = 0;
aat->aat_ataddr.s_net = 0;
aat->aat_ataddr.s_node = 0;
}
struct aarptab *
aarptnew(addr)
struct at_addr *addr;
{
int n;
int oldest = -1;
struct aarptab *aat, *aato = NULL;
static int first = 1;
AARPTAB_LOCK_ASSERT();
if (first) {
first = 0;
aarptimer_ch = timeout(aarptimer, (caddr_t)0, hz);
}
aat = &aarptab[ AARPTAB_HASH(*addr) * AARPTAB_BSIZ ];
for (n = 0; n < AARPTAB_BSIZ; n++, aat++) {
if (aat->aat_flags == 0)
goto out;
if (aat->aat_flags & ATF_PERM)
continue;
if ((int) aat->aat_timer > oldest) {
oldest = aat->aat_timer;
aato = aat;
}
}
if (aato == NULL)
return (NULL);
aat = aato;
aarptfree(aat);
out:
aat->aat_ataddr = *addr;
aat->aat_flags = ATF_INUSE;
return (aat);
}
void
aarpprobe(void *arg)
{
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
struct ifnet *ifp = arg;
struct mbuf *m;
struct ether_header *eh;
struct ether_aarp *ea;
struct at_ifaddr *aa;
struct llc *llc;
struct sockaddr sa;
/*
* We need to check whether the output ethernet type should
* be phase 1 or 2. We have the interface that we'll be sending
* the aarp out. We need to find an AppleTalk network on that
* interface with the same address as we're looking for. If the
* net is phase 2, generate an 802.2 and SNAP header.
*/
AARPTAB_LOCK();
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
for (aa = (struct at_ifaddr *)TAILQ_FIRST(&ifp->if_addrhead); aa;
aa = (struct at_ifaddr *)aa->aa_ifa.ifa_link.tqe_next) {
if (AA_SAT(aa)->sat_family == AF_APPLETALK &&
(aa->aa_flags & AFA_PROBING)) {
break;
}
}
if (aa == NULL) { /* serious error XXX */
AARPTAB_UNLOCK();
printf("aarpprobe why did this happen?!\n");
return;
}
if (aa->aa_probcnt <= 0) {
aa->aa_flags &= ~AFA_PROBING;
wakeup(aa);
AARPTAB_UNLOCK();
return;
} else {
callout_reset(&aa->aa_callout, hz / 5, aarpprobe, ifp);
}
AARPTAB_UNLOCK();
if ((m = m_gethdr(M_DONTWAIT, MT_DATA)) == NULL) {
return;
}
#ifdef MAC
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
mac_create_mbuf_linklayer(ifp, m);
#endif
m->m_len = sizeof(*ea);
m->m_pkthdr.len = sizeof(*ea);
MH_ALIGN(m, sizeof(*ea));
ea = mtod(m, struct ether_aarp *);
bzero((caddr_t)ea, sizeof(*ea));
ea->aarp_hrd = htons(AARPHRD_ETHER);
ea->aarp_pro = htons(ETHERTYPE_AT);
ea->aarp_hln = sizeof(ea->aarp_sha);
ea->aarp_pln = sizeof(ea->aarp_spu);
ea->aarp_op = htons(AARPOP_PROBE);
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
bcopy(IFP2AC(ifp)->ac_enaddr, (caddr_t)ea->aarp_sha,
sizeof(ea->aarp_sha));
eh = (struct ether_header *)sa.sa_data;
if (aa->aa_flags & AFA_PHASE2) {
bcopy(atmulticastaddr, eh->ether_dhost, sizeof(eh->ether_dhost));
eh->ether_type = htons(sizeof(struct llc) +
sizeof(struct ether_aarp));
M_PREPEND(m, sizeof(struct llc), M_TRYWAIT);
if (m == NULL) {
return;
}
llc = mtod(m, struct llc *);
llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP;
llc->llc_control = LLC_UI;
bcopy(aarp_org_code, llc->llc_org_code, sizeof(aarp_org_code));
llc->llc_ether_type = htons(ETHERTYPE_AARP);
bcopy(&AA_SAT(aa)->sat_addr.s_net, ea->aarp_spnet,
sizeof(ea->aarp_spnet));
bcopy(&AA_SAT(aa)->sat_addr.s_net, ea->aarp_tpnet,
sizeof(ea->aarp_tpnet));
ea->aarp_spnode = ea->aarp_tpnode = AA_SAT(aa)->sat_addr.s_node;
} else {
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
bcopy(ifp->if_broadcastaddr, (caddr_t)eh->ether_dhost,
sizeof(eh->ether_dhost));
eh->ether_type = htons(ETHERTYPE_AARP);
ea->aarp_spa = ea->aarp_tpa = AA_SAT(aa)->sat_addr.s_node;
}
#ifdef NETATALKDEBUG
printf("aarp: sending probe for %u.%u\n",
ntohs(AA_SAT(aa)->sat_addr.s_net),
AA_SAT(aa)->sat_addr.s_node);
#endif /* NETATALKDEBUG */
sa.sa_len = sizeof(struct sockaddr);
sa.sa_family = AF_UNSPEC;
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
(*ifp->if_output)(ifp, m, &sa, NULL); /* XXX */
aa->aa_probcnt--;
}
void
aarp_clean(void)
{
struct aarptab *aat;
int i;
untimeout(aarptimer, 0, aarptimer_ch);
AARPTAB_LOCK();
for (i = 0, aat = aarptab; i < AARPTAB_SIZE; i++, aat++) {
if (aat->aat_hold) {
m_freem(aat->aat_hold);
aat->aat_hold = NULL;
}
}
AARPTAB_UNLOCK();
}