freebsd-nq/module/zfs/vdev_mirror.c

564 lines
14 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2010 Sun Microsystems, Inc. All rights reserved.
2008-11-20 20:01:55 +00:00
* Use is subject to license terms.
*/
/*
* Copyright (c) 2013 by Delphix. All rights reserved.
*/
2008-11-20 20:01:55 +00:00
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/vdev_impl.h>
#include <sys/zio.h>
#include <sys/fs/zfs.h>
/*
* Virtual device vector for mirroring.
*/
typedef struct mirror_child {
vdev_t *mc_vd;
uint64_t mc_offset;
int mc_error;
Improve N-way mirror performance The read bandwidth of an N-way mirror can by increased by 50%, and the IOPs by 10%, by more carefully selecting the preferred leaf vdev. The existing algorthm selects a perferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the drives are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. Utilization can be improved by preferentially selecting the leaf vdev with the least pending IO. This prevents leaf vdevs from being starved and compensates for performance differences between disks in the mirror. Faster vdevs will be sent more work and the mirror performance will not be limitted by the slowest drive. In the common case where all the pending queues are full and there is no single least busy leaf vdev a batching stratagy is employed. Of the N least busy vdevs one is selected with equal probability to be the preferred vdev for T microseconds. Compared to randomly selecting a vdev to break the tie batching the requests greatly improves the odds of merging the requests in the Linux elevator. The testing results show a significant performance improvement for all four workloads tested. The workloads were generated using the fio benchmark and are as follows. 1) 1MB sequential reads from 16 threads to 16 files (MB/s). 2) 4KB sequential reads from 16 threads to 16 files (MB/s). 3) 1MB random reads from 16 threads to 16 files (IOP/s). 4) 4KB random reads from 16 threads to 16 files (IOP/s). | Pristine | With 1461 | | Sequential Random | Sequential Random | | 1MB 4KB 1MB 4KB | 1MB 4KB 1MB 4KB | | MB/s MB/s IO/s IO/s | MB/s MB/s IO/s IO/s | ---------------+-----------------------+------------------------+ 2 Striped | 226 243 11 304 | 222 255 11 299 | 2 2-Way Mirror | 302 324 16 534 | 433 448 23 571 | 2 3-Way Mirror | 429 458 24 714 | 648 648 41 808 | 2 4-Way Mirror | 562 601 36 849 | 816 828 82 926 | Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1461
2013-05-31 19:07:59 +00:00
int mc_pending;
uint8_t mc_tried;
uint8_t mc_skipped;
uint8_t mc_speculative;
2008-11-20 20:01:55 +00:00
} mirror_child_t;
typedef struct mirror_map {
int mm_children;
int mm_replacing;
int mm_preferred;
int mm_root;
mirror_child_t mm_child[1];
} mirror_map_t;
Improve N-way mirror performance The read bandwidth of an N-way mirror can by increased by 50%, and the IOPs by 10%, by more carefully selecting the preferred leaf vdev. The existing algorthm selects a perferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the drives are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. Utilization can be improved by preferentially selecting the leaf vdev with the least pending IO. This prevents leaf vdevs from being starved and compensates for performance differences between disks in the mirror. Faster vdevs will be sent more work and the mirror performance will not be limitted by the slowest drive. In the common case where all the pending queues are full and there is no single least busy leaf vdev a batching stratagy is employed. Of the N least busy vdevs one is selected with equal probability to be the preferred vdev for T microseconds. Compared to randomly selecting a vdev to break the tie batching the requests greatly improves the odds of merging the requests in the Linux elevator. The testing results show a significant performance improvement for all four workloads tested. The workloads were generated using the fio benchmark and are as follows. 1) 1MB sequential reads from 16 threads to 16 files (MB/s). 2) 4KB sequential reads from 16 threads to 16 files (MB/s). 3) 1MB random reads from 16 threads to 16 files (IOP/s). 4) 4KB random reads from 16 threads to 16 files (IOP/s). | Pristine | With 1461 | | Sequential Random | Sequential Random | | 1MB 4KB 1MB 4KB | 1MB 4KB 1MB 4KB | | MB/s MB/s IO/s IO/s | MB/s MB/s IO/s IO/s | ---------------+-----------------------+------------------------+ 2 Striped | 226 243 11 304 | 222 255 11 299 | 2 2-Way Mirror | 302 324 16 534 | 433 448 23 571 | 2 3-Way Mirror | 429 458 24 714 | 648 648 41 808 | 2 4-Way Mirror | 562 601 36 849 | 816 828 82 926 | Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1461
2013-05-31 19:07:59 +00:00
/*
* When the children are equally busy queue incoming requests to a single
* child for N microseconds. This is done to maximize the likelihood that
* the Linux elevator will be able to merge requests while it is plugged.
* Otherwise, requests are queued to the least busy device.
*
* For rotational disks the Linux elevator will plug for 10ms which is
* why zfs_vdev_mirror_switch_us is set to 10ms by default. For non-
* rotational disks the elevator will not plug, but 10ms is still a small
* enough value that the requests will get spread over all the children.
*
* For fast SSDs it may make sense to decrease zfs_vdev_mirror_switch_us
* significantly to bound the worst case latencies. It would probably be
* ideal to calculate a decaying average of the last observed latencies and
* use that to dynamically adjust the zfs_vdev_mirror_switch_us time.
*/
int zfs_vdev_mirror_switch_us = 10000;
2008-11-20 20:01:55 +00:00
static void
vdev_mirror_map_free(zio_t *zio)
{
mirror_map_t *mm = zio->io_vsd;
kmem_free(mm, offsetof(mirror_map_t, mm_child[mm->mm_children]));
}
static const zio_vsd_ops_t vdev_mirror_vsd_ops = {
vdev_mirror_map_free,
zio_vsd_default_cksum_report
};
Improve N-way mirror performance The read bandwidth of an N-way mirror can by increased by 50%, and the IOPs by 10%, by more carefully selecting the preferred leaf vdev. The existing algorthm selects a perferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the drives are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. Utilization can be improved by preferentially selecting the leaf vdev with the least pending IO. This prevents leaf vdevs from being starved and compensates for performance differences between disks in the mirror. Faster vdevs will be sent more work and the mirror performance will not be limitted by the slowest drive. In the common case where all the pending queues are full and there is no single least busy leaf vdev a batching stratagy is employed. Of the N least busy vdevs one is selected with equal probability to be the preferred vdev for T microseconds. Compared to randomly selecting a vdev to break the tie batching the requests greatly improves the odds of merging the requests in the Linux elevator. The testing results show a significant performance improvement for all four workloads tested. The workloads were generated using the fio benchmark and are as follows. 1) 1MB sequential reads from 16 threads to 16 files (MB/s). 2) 4KB sequential reads from 16 threads to 16 files (MB/s). 3) 1MB random reads from 16 threads to 16 files (IOP/s). 4) 4KB random reads from 16 threads to 16 files (IOP/s). | Pristine | With 1461 | | Sequential Random | Sequential Random | | 1MB 4KB 1MB 4KB | 1MB 4KB 1MB 4KB | | MB/s MB/s IO/s IO/s | MB/s MB/s IO/s IO/s | ---------------+-----------------------+------------------------+ 2 Striped | 226 243 11 304 | 222 255 11 299 | 2 2-Way Mirror | 302 324 16 534 | 433 448 23 571 | 2 3-Way Mirror | 429 458 24 714 | 648 648 41 808 | 2 4-Way Mirror | 562 601 36 849 | 816 828 82 926 | Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1461
2013-05-31 19:07:59 +00:00
static int
vdev_mirror_pending(vdev_t *vd)
{
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 03:01:20 +00:00
return (avl_numnodes(&vd->vdev_queue.vq_active_tree));
Improve N-way mirror performance The read bandwidth of an N-way mirror can by increased by 50%, and the IOPs by 10%, by more carefully selecting the preferred leaf vdev. The existing algorthm selects a perferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the drives are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. Utilization can be improved by preferentially selecting the leaf vdev with the least pending IO. This prevents leaf vdevs from being starved and compensates for performance differences between disks in the mirror. Faster vdevs will be sent more work and the mirror performance will not be limitted by the slowest drive. In the common case where all the pending queues are full and there is no single least busy leaf vdev a batching stratagy is employed. Of the N least busy vdevs one is selected with equal probability to be the preferred vdev for T microseconds. Compared to randomly selecting a vdev to break the tie batching the requests greatly improves the odds of merging the requests in the Linux elevator. The testing results show a significant performance improvement for all four workloads tested. The workloads were generated using the fio benchmark and are as follows. 1) 1MB sequential reads from 16 threads to 16 files (MB/s). 2) 4KB sequential reads from 16 threads to 16 files (MB/s). 3) 1MB random reads from 16 threads to 16 files (IOP/s). 4) 4KB random reads from 16 threads to 16 files (IOP/s). | Pristine | With 1461 | | Sequential Random | Sequential Random | | 1MB 4KB 1MB 4KB | 1MB 4KB 1MB 4KB | | MB/s MB/s IO/s IO/s | MB/s MB/s IO/s IO/s | ---------------+-----------------------+------------------------+ 2 Striped | 226 243 11 304 | 222 255 11 299 | 2 2-Way Mirror | 302 324 16 534 | 433 448 23 571 | 2 3-Way Mirror | 429 458 24 714 | 648 648 41 808 | 2 4-Way Mirror | 562 601 36 849 | 816 828 82 926 | Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1461
2013-05-31 19:07:59 +00:00
}
Reduce stack for traverse_visitbp() recursion During pool import stack overflows may still occur due to the potentially deep recursion of traverse_visitbp(). This is most likely to occur when additional layers are added to the block device stack such as DM multipath. To minimize the stack usage for this call path the following changes were made: 1) Added the keywork 'noinline' to the vdev_*_map_alloc() functions to prevent them from being inlined by gcc. This reduced the stack usage of vdev_raidz_io_start() from 208 to 128 bytes, and vdev_mirror_io_start() from 144 to 128 bytes. 2) The 'saved_poolname' charater array in zfsdev_ioctl() was moved from the stack to the heap. This reduced the stack usage of zfsdev_ioctl() from 368 to 112 bytes. 3) The major saving came from slimming down traverse_visitbp() from from 224 to 144 bytes. Since this function is called recursively the 80 bytes saved per invokation adds up. The following changes were made: a) The 'hard' local variable was replaced by a TD_HARD() macro. b) The 'pd' local variable was replaced by 'td->td_pfd' references. c) The zbookmark_t was moved to the heap. This does cost us an additional memory allocation per recursion by that cost should still be minimal. The cost could be further reduced by adding a dedicated zbookmark_t slab cache. d) The variable declarations in 'if (BP_GET_LEVEL()) { }' were restructured to use the minimum amount of stack. This includes removing the 'cbp' local variable. Overall for the offending use case roughly 1584 of total stack space has been saved. This is enough to avoid overflowing the stack on stock kernels with 8k stacks. See #1778 for additional details. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #1778
2013-11-13 19:05:17 +00:00
/*
* Avoid inlining the function to keep vdev_mirror_io_start(), which
* is this functions only caller, as small as possible on the stack.
*/
noinline static mirror_map_t *
2008-11-20 20:01:55 +00:00
vdev_mirror_map_alloc(zio_t *zio)
{
mirror_map_t *mm = NULL;
mirror_child_t *mc;
vdev_t *vd = zio->io_vd;
int c, d;
if (vd == NULL) {
dva_t *dva = zio->io_bp->blk_dva;
spa_t *spa = zio->io_spa;
c = BP_GET_NDVAS(zio->io_bp);
Reduce stack for traverse_visitbp() recursion During pool import stack overflows may still occur due to the potentially deep recursion of traverse_visitbp(). This is most likely to occur when additional layers are added to the block device stack such as DM multipath. To minimize the stack usage for this call path the following changes were made: 1) Added the keywork 'noinline' to the vdev_*_map_alloc() functions to prevent them from being inlined by gcc. This reduced the stack usage of vdev_raidz_io_start() from 208 to 128 bytes, and vdev_mirror_io_start() from 144 to 128 bytes. 2) The 'saved_poolname' charater array in zfsdev_ioctl() was moved from the stack to the heap. This reduced the stack usage of zfsdev_ioctl() from 368 to 112 bytes. 3) The major saving came from slimming down traverse_visitbp() from from 224 to 144 bytes. Since this function is called recursively the 80 bytes saved per invokation adds up. The following changes were made: a) The 'hard' local variable was replaced by a TD_HARD() macro. b) The 'pd' local variable was replaced by 'td->td_pfd' references. c) The zbookmark_t was moved to the heap. This does cost us an additional memory allocation per recursion by that cost should still be minimal. The cost could be further reduced by adding a dedicated zbookmark_t slab cache. d) The variable declarations in 'if (BP_GET_LEVEL()) { }' were restructured to use the minimum amount of stack. This includes removing the 'cbp' local variable. Overall for the offending use case roughly 1584 of total stack space has been saved. This is enough to avoid overflowing the stack on stock kernels with 8k stacks. See #1778 for additional details. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #1778
2013-11-13 19:05:17 +00:00
mm = kmem_zalloc(offsetof(mirror_map_t, mm_child[c]),
KM_SLEEP);
2008-11-20 20:01:55 +00:00
mm->mm_children = c;
mm->mm_replacing = B_FALSE;
mm->mm_preferred = spa_get_random(c);
mm->mm_root = B_TRUE;
/*
* Check the other, lower-index DVAs to see if they're on
* the same vdev as the child we picked. If they are, use
* them since they are likely to have been allocated from
* the primary metaslab in use at the time, and hence are
* more likely to have locality with single-copy data.
*/
for (c = mm->mm_preferred, d = c - 1; d >= 0; d--) {
if (DVA_GET_VDEV(&dva[d]) == DVA_GET_VDEV(&dva[c]))
mm->mm_preferred = d;
}
for (c = 0; c < mm->mm_children; c++) {
mc = &mm->mm_child[c];
mc->mc_vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[c]));
mc->mc_offset = DVA_GET_OFFSET(&dva[c]);
}
} else {
Improve N-way mirror performance The read bandwidth of an N-way mirror can by increased by 50%, and the IOPs by 10%, by more carefully selecting the preferred leaf vdev. The existing algorthm selects a perferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the drives are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. Utilization can be improved by preferentially selecting the leaf vdev with the least pending IO. This prevents leaf vdevs from being starved and compensates for performance differences between disks in the mirror. Faster vdevs will be sent more work and the mirror performance will not be limitted by the slowest drive. In the common case where all the pending queues are full and there is no single least busy leaf vdev a batching stratagy is employed. Of the N least busy vdevs one is selected with equal probability to be the preferred vdev for T microseconds. Compared to randomly selecting a vdev to break the tie batching the requests greatly improves the odds of merging the requests in the Linux elevator. The testing results show a significant performance improvement for all four workloads tested. The workloads were generated using the fio benchmark and are as follows. 1) 1MB sequential reads from 16 threads to 16 files (MB/s). 2) 4KB sequential reads from 16 threads to 16 files (MB/s). 3) 1MB random reads from 16 threads to 16 files (IOP/s). 4) 4KB random reads from 16 threads to 16 files (IOP/s). | Pristine | With 1461 | | Sequential Random | Sequential Random | | 1MB 4KB 1MB 4KB | 1MB 4KB 1MB 4KB | | MB/s MB/s IO/s IO/s | MB/s MB/s IO/s IO/s | ---------------+-----------------------+------------------------+ 2 Striped | 226 243 11 304 | 222 255 11 299 | 2 2-Way Mirror | 302 324 16 534 | 433 448 23 571 | 2 3-Way Mirror | 429 458 24 714 | 648 648 41 808 | 2 4-Way Mirror | 562 601 36 849 | 816 828 82 926 | Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1461
2013-05-31 19:07:59 +00:00
int lowest_pending = INT_MAX;
int lowest_nr = 1;
2008-11-20 20:01:55 +00:00
c = vd->vdev_children;
Reduce stack for traverse_visitbp() recursion During pool import stack overflows may still occur due to the potentially deep recursion of traverse_visitbp(). This is most likely to occur when additional layers are added to the block device stack such as DM multipath. To minimize the stack usage for this call path the following changes were made: 1) Added the keywork 'noinline' to the vdev_*_map_alloc() functions to prevent them from being inlined by gcc. This reduced the stack usage of vdev_raidz_io_start() from 208 to 128 bytes, and vdev_mirror_io_start() from 144 to 128 bytes. 2) The 'saved_poolname' charater array in zfsdev_ioctl() was moved from the stack to the heap. This reduced the stack usage of zfsdev_ioctl() from 368 to 112 bytes. 3) The major saving came from slimming down traverse_visitbp() from from 224 to 144 bytes. Since this function is called recursively the 80 bytes saved per invokation adds up. The following changes were made: a) The 'hard' local variable was replaced by a TD_HARD() macro. b) The 'pd' local variable was replaced by 'td->td_pfd' references. c) The zbookmark_t was moved to the heap. This does cost us an additional memory allocation per recursion by that cost should still be minimal. The cost could be further reduced by adding a dedicated zbookmark_t slab cache. d) The variable declarations in 'if (BP_GET_LEVEL()) { }' were restructured to use the minimum amount of stack. This includes removing the 'cbp' local variable. Overall for the offending use case roughly 1584 of total stack space has been saved. This is enough to avoid overflowing the stack on stock kernels with 8k stacks. See #1778 for additional details. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #1778
2013-11-13 19:05:17 +00:00
mm = kmem_zalloc(offsetof(mirror_map_t, mm_child[c]),
KM_SLEEP);
2008-11-20 20:01:55 +00:00
mm->mm_children = c;
mm->mm_replacing = (vd->vdev_ops == &vdev_replacing_ops ||
vd->vdev_ops == &vdev_spare_ops);
Improve N-way mirror performance The read bandwidth of an N-way mirror can by increased by 50%, and the IOPs by 10%, by more carefully selecting the preferred leaf vdev. The existing algorthm selects a perferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the drives are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. Utilization can be improved by preferentially selecting the leaf vdev with the least pending IO. This prevents leaf vdevs from being starved and compensates for performance differences between disks in the mirror. Faster vdevs will be sent more work and the mirror performance will not be limitted by the slowest drive. In the common case where all the pending queues are full and there is no single least busy leaf vdev a batching stratagy is employed. Of the N least busy vdevs one is selected with equal probability to be the preferred vdev for T microseconds. Compared to randomly selecting a vdev to break the tie batching the requests greatly improves the odds of merging the requests in the Linux elevator. The testing results show a significant performance improvement for all four workloads tested. The workloads were generated using the fio benchmark and are as follows. 1) 1MB sequential reads from 16 threads to 16 files (MB/s). 2) 4KB sequential reads from 16 threads to 16 files (MB/s). 3) 1MB random reads from 16 threads to 16 files (IOP/s). 4) 4KB random reads from 16 threads to 16 files (IOP/s). | Pristine | With 1461 | | Sequential Random | Sequential Random | | 1MB 4KB 1MB 4KB | 1MB 4KB 1MB 4KB | | MB/s MB/s IO/s IO/s | MB/s MB/s IO/s IO/s | ---------------+-----------------------+------------------------+ 2 Striped | 226 243 11 304 | 222 255 11 299 | 2 2-Way Mirror | 302 324 16 534 | 433 448 23 571 | 2 3-Way Mirror | 429 458 24 714 | 648 648 41 808 | 2 4-Way Mirror | 562 601 36 849 | 816 828 82 926 | Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1461
2013-05-31 19:07:59 +00:00
mm->mm_preferred = 0;
2008-11-20 20:01:55 +00:00
mm->mm_root = B_FALSE;
for (c = 0; c < mm->mm_children; c++) {
mc = &mm->mm_child[c];
mc->mc_vd = vd->vdev_child[c];
mc->mc_offset = zio->io_offset;
Improve N-way mirror performance The read bandwidth of an N-way mirror can by increased by 50%, and the IOPs by 10%, by more carefully selecting the preferred leaf vdev. The existing algorthm selects a perferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the drives are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. Utilization can be improved by preferentially selecting the leaf vdev with the least pending IO. This prevents leaf vdevs from being starved and compensates for performance differences between disks in the mirror. Faster vdevs will be sent more work and the mirror performance will not be limitted by the slowest drive. In the common case where all the pending queues are full and there is no single least busy leaf vdev a batching stratagy is employed. Of the N least busy vdevs one is selected with equal probability to be the preferred vdev for T microseconds. Compared to randomly selecting a vdev to break the tie batching the requests greatly improves the odds of merging the requests in the Linux elevator. The testing results show a significant performance improvement for all four workloads tested. The workloads were generated using the fio benchmark and are as follows. 1) 1MB sequential reads from 16 threads to 16 files (MB/s). 2) 4KB sequential reads from 16 threads to 16 files (MB/s). 3) 1MB random reads from 16 threads to 16 files (IOP/s). 4) 4KB random reads from 16 threads to 16 files (IOP/s). | Pristine | With 1461 | | Sequential Random | Sequential Random | | 1MB 4KB 1MB 4KB | 1MB 4KB 1MB 4KB | | MB/s MB/s IO/s IO/s | MB/s MB/s IO/s IO/s | ---------------+-----------------------+------------------------+ 2 Striped | 226 243 11 304 | 222 255 11 299 | 2 2-Way Mirror | 302 324 16 534 | 433 448 23 571 | 2 3-Way Mirror | 429 458 24 714 | 648 648 41 808 | 2 4-Way Mirror | 562 601 36 849 | 816 828 82 926 | Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1461
2013-05-31 19:07:59 +00:00
if (mm->mm_replacing)
continue;
if (!vdev_readable(mc->mc_vd)) {
mc->mc_error = SET_ERROR(ENXIO);
Improve N-way mirror performance The read bandwidth of an N-way mirror can by increased by 50%, and the IOPs by 10%, by more carefully selecting the preferred leaf vdev. The existing algorthm selects a perferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the drives are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. Utilization can be improved by preferentially selecting the leaf vdev with the least pending IO. This prevents leaf vdevs from being starved and compensates for performance differences between disks in the mirror. Faster vdevs will be sent more work and the mirror performance will not be limitted by the slowest drive. In the common case where all the pending queues are full and there is no single least busy leaf vdev a batching stratagy is employed. Of the N least busy vdevs one is selected with equal probability to be the preferred vdev for T microseconds. Compared to randomly selecting a vdev to break the tie batching the requests greatly improves the odds of merging the requests in the Linux elevator. The testing results show a significant performance improvement for all four workloads tested. The workloads were generated using the fio benchmark and are as follows. 1) 1MB sequential reads from 16 threads to 16 files (MB/s). 2) 4KB sequential reads from 16 threads to 16 files (MB/s). 3) 1MB random reads from 16 threads to 16 files (IOP/s). 4) 4KB random reads from 16 threads to 16 files (IOP/s). | Pristine | With 1461 | | Sequential Random | Sequential Random | | 1MB 4KB 1MB 4KB | 1MB 4KB 1MB 4KB | | MB/s MB/s IO/s IO/s | MB/s MB/s IO/s IO/s | ---------------+-----------------------+------------------------+ 2 Striped | 226 243 11 304 | 222 255 11 299 | 2 2-Way Mirror | 302 324 16 534 | 433 448 23 571 | 2 3-Way Mirror | 429 458 24 714 | 648 648 41 808 | 2 4-Way Mirror | 562 601 36 849 | 816 828 82 926 | Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1461
2013-05-31 19:07:59 +00:00
mc->mc_tried = 1;
mc->mc_skipped = 1;
mc->mc_pending = INT_MAX;
continue;
}
mc->mc_pending = vdev_mirror_pending(mc->mc_vd);
if (mc->mc_pending < lowest_pending) {
lowest_pending = mc->mc_pending;
lowest_nr = 1;
} else if (mc->mc_pending == lowest_pending) {
lowest_nr++;
}
}
d = gethrtime() / (NSEC_PER_USEC * zfs_vdev_mirror_switch_us);
d = (d % lowest_nr) + 1;
for (c = 0; c < mm->mm_children; c++) {
mc = &mm->mm_child[c];
if (mm->mm_child[c].mc_pending == lowest_pending) {
if (--d == 0) {
mm->mm_preferred = c;
break;
}
}
2008-11-20 20:01:55 +00:00
}
}
zio->io_vsd = mm;
zio->io_vsd_ops = &vdev_mirror_vsd_ops;
2008-11-20 20:01:55 +00:00
return (mm);
}
static int
vdev_mirror_open(vdev_t *vd, uint64_t *asize, uint64_t *max_asize,
uint64_t *ashift)
2008-11-20 20:01:55 +00:00
{
int numerrors = 0;
2009-08-18 18:43:27 +00:00
int lasterror = 0;
int c;
2008-11-20 20:01:55 +00:00
if (vd->vdev_children == 0) {
vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
}
2009-08-18 18:43:27 +00:00
vdev_open_children(vd);
2008-11-20 20:01:55 +00:00
for (c = 0; c < vd->vdev_children; c++) {
2009-08-18 18:43:27 +00:00
vdev_t *cvd = vd->vdev_child[c];
if (cvd->vdev_open_error) {
lasterror = cvd->vdev_open_error;
2008-11-20 20:01:55 +00:00
numerrors++;
continue;
}
*asize = MIN(*asize - 1, cvd->vdev_asize - 1) + 1;
*max_asize = MIN(*max_asize - 1, cvd->vdev_max_asize - 1) + 1;
2008-11-20 20:01:55 +00:00
*ashift = MAX(*ashift, cvd->vdev_ashift);
}
if (numerrors == vd->vdev_children) {
vd->vdev_stat.vs_aux = VDEV_AUX_NO_REPLICAS;
return (lasterror);
}
return (0);
}
static void
vdev_mirror_close(vdev_t *vd)
{
int c;
for (c = 0; c < vd->vdev_children; c++)
2008-11-20 20:01:55 +00:00
vdev_close(vd->vdev_child[c]);
}
static void
vdev_mirror_child_done(zio_t *zio)
{
mirror_child_t *mc = zio->io_private;
mc->mc_error = zio->io_error;
mc->mc_tried = 1;
mc->mc_skipped = 0;
}
static void
vdev_mirror_scrub_done(zio_t *zio)
{
mirror_child_t *mc = zio->io_private;
if (zio->io_error == 0) {
2009-02-18 20:51:31 +00:00
zio_t *pio;
mutex_enter(&zio->io_lock);
while ((pio = zio_walk_parents(zio)) != NULL) {
mutex_enter(&pio->io_lock);
ASSERT3U(zio->io_size, >=, pio->io_size);
bcopy(zio->io_data, pio->io_data, pio->io_size);
mutex_exit(&pio->io_lock);
}
mutex_exit(&zio->io_lock);
2008-11-20 20:01:55 +00:00
}
zio_buf_free(zio->io_data, zio->io_size);
mc->mc_error = zio->io_error;
mc->mc_tried = 1;
mc->mc_skipped = 0;
}
/*
* Try to find a child whose DTL doesn't contain the block we want to read.
* If we can't, try the read on any vdev we haven't already tried.
*/
static int
vdev_mirror_child_select(zio_t *zio)
{
mirror_map_t *mm = zio->io_vsd;
mirror_child_t *mc;
uint64_t txg = zio->io_txg;
int i, c;
ASSERT(zio->io_bp == NULL || BP_PHYSICAL_BIRTH(zio->io_bp) == txg);
2008-11-20 20:01:55 +00:00
/*
* Try to find a child whose DTL doesn't contain the block to read.
* If a child is known to be completely inaccessible (indicated by
* vdev_readable() returning B_FALSE), don't even try.
*/
for (i = 0, c = mm->mm_preferred; i < mm->mm_children; i++, c++) {
if (c >= mm->mm_children)
c = 0;
mc = &mm->mm_child[c];
if (mc->mc_tried || mc->mc_skipped)
continue;
if (mc->mc_vd == NULL || !vdev_readable(mc->mc_vd)) {
mc->mc_error = SET_ERROR(ENXIO);
2008-11-20 20:01:55 +00:00
mc->mc_tried = 1; /* don't even try */
mc->mc_skipped = 1;
continue;
}
2009-01-15 21:59:39 +00:00
if (!vdev_dtl_contains(mc->mc_vd, DTL_MISSING, txg, 1))
2008-11-20 20:01:55 +00:00
return (c);
mc->mc_error = SET_ERROR(ESTALE);
2008-11-20 20:01:55 +00:00
mc->mc_skipped = 1;
mc->mc_speculative = 1;
2008-11-20 20:01:55 +00:00
}
/*
* Every device is either missing or has this txg in its DTL.
* Look for any child we haven't already tried before giving up.
*/
for (c = 0; c < mm->mm_children; c++)
if (!mm->mm_child[c].mc_tried)
return (c);
/*
* Every child failed. There's no place left to look.
*/
return (-1);
}
static int
vdev_mirror_io_start(zio_t *zio)
{
mirror_map_t *mm;
mirror_child_t *mc;
int c, children;
mm = vdev_mirror_map_alloc(zio);
if (zio->io_type == ZIO_TYPE_READ) {
if ((zio->io_flags & ZIO_FLAG_SCRUB) && !mm->mm_replacing) {
/*
* For scrubbing reads we need to allocate a read
* buffer for each child and issue reads to all
* children. If any child succeeds, it will copy its
* data into zio->io_data in vdev_mirror_scrub_done.
*/
for (c = 0; c < mm->mm_children; c++) {
mc = &mm->mm_child[c];
zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
mc->mc_vd, mc->mc_offset,
zio_buf_alloc(zio->io_size), zio->io_size,
zio->io_type, zio->io_priority, 0,
2008-11-20 20:01:55 +00:00
vdev_mirror_scrub_done, mc));
}
return (ZIO_PIPELINE_CONTINUE);
2008-11-20 20:01:55 +00:00
}
/*
* For normal reads just pick one child.
*/
c = vdev_mirror_child_select(zio);
children = (c >= 0);
} else {
ASSERT(zio->io_type == ZIO_TYPE_WRITE);
/*
2009-01-15 21:59:39 +00:00
* Writes go to all children.
2008-11-20 20:01:55 +00:00
*/
2009-01-15 21:59:39 +00:00
c = 0;
children = mm->mm_children;
2008-11-20 20:01:55 +00:00
}
while (children--) {
mc = &mm->mm_child[c];
zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
mc->mc_vd, mc->mc_offset, zio->io_data, zio->io_size,
zio->io_type, zio->io_priority, 0,
vdev_mirror_child_done, mc));
2008-11-20 20:01:55 +00:00
c++;
}
return (ZIO_PIPELINE_CONTINUE);
2008-11-20 20:01:55 +00:00
}
static int
vdev_mirror_worst_error(mirror_map_t *mm)
{
int c, error[2] = { 0, 0 };
for (c = 0; c < mm->mm_children; c++) {
mirror_child_t *mc = &mm->mm_child[c];
int s = mc->mc_speculative;
error[s] = zio_worst_error(error[s], mc->mc_error);
}
return (error[0] ? error[0] : error[1]);
}
static void
2008-11-20 20:01:55 +00:00
vdev_mirror_io_done(zio_t *zio)
{
mirror_map_t *mm = zio->io_vsd;
mirror_child_t *mc;
int c;
int good_copies = 0;
int unexpected_errors = 0;
for (c = 0; c < mm->mm_children; c++) {
mc = &mm->mm_child[c];
if (mc->mc_error) {
if (!mc->mc_skipped)
unexpected_errors++;
} else if (mc->mc_tried) {
good_copies++;
2008-11-20 20:01:55 +00:00
}
}
if (zio->io_type == ZIO_TYPE_WRITE) {
/*
* XXX -- for now, treat partial writes as success.
*
* Now that we support write reallocation, it would be better
* to treat partial failure as real failure unless there are
* no non-degraded top-level vdevs left, and not update DTLs
* if we intend to reallocate.
2008-11-20 20:01:55 +00:00
*/
/* XXPOLICY */
if (good_copies != mm->mm_children) {
/*
* Always require at least one good copy.
*
* For ditto blocks (io_vd == NULL), require
* all copies to be good.
*
* XXX -- for replacing vdevs, there's no great answer.
* If the old device is really dead, we may not even
* be able to access it -- so we only want to
* require good writes to the new device. But if
* the new device turns out to be flaky, we want
* to be able to detach it -- which requires all
* writes to the old device to have succeeded.
*/
if (good_copies == 0 || zio->io_vd == NULL)
zio->io_error = vdev_mirror_worst_error(mm);
}
return;
2008-11-20 20:01:55 +00:00
}
ASSERT(zio->io_type == ZIO_TYPE_READ);
/*
* If we don't have a good copy yet, keep trying other children.
*/
/* XXPOLICY */
if (good_copies == 0 && (c = vdev_mirror_child_select(zio)) != -1) {
ASSERT(c >= 0 && c < mm->mm_children);
mc = &mm->mm_child[c];
zio_vdev_io_redone(zio);
zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
mc->mc_vd, mc->mc_offset, zio->io_data, zio->io_size,
ZIO_TYPE_READ, zio->io_priority, 0,
2008-11-20 20:01:55 +00:00
vdev_mirror_child_done, mc));
return;
2008-11-20 20:01:55 +00:00
}
/* XXPOLICY */
if (good_copies == 0) {
zio->io_error = vdev_mirror_worst_error(mm);
2008-11-20 20:01:55 +00:00
ASSERT(zio->io_error != 0);
}
2008-11-20 20:01:55 +00:00
2009-01-15 21:59:39 +00:00
if (good_copies && spa_writeable(zio->io_spa) &&
2008-11-20 20:01:55 +00:00
(unexpected_errors ||
(zio->io_flags & ZIO_FLAG_RESILVER) ||
((zio->io_flags & ZIO_FLAG_SCRUB) && mm->mm_replacing))) {
/*
* Use the good data we have in hand to repair damaged children.
*/
for (c = 0; c < mm->mm_children; c++) {
/*
* Don't rewrite known good children.
* Not only is it unnecessary, it could
* actually be harmful: if the system lost
* power while rewriting the only good copy,
* there would be no good copies left!
*/
mc = &mm->mm_child[c];
if (mc->mc_error == 0) {
if (mc->mc_tried)
continue;
if (!(zio->io_flags & ZIO_FLAG_SCRUB) &&
2009-01-15 21:59:39 +00:00
!vdev_dtl_contains(mc->mc_vd, DTL_PARTIAL,
2008-11-20 20:01:55 +00:00
zio->io_txg, 1))
continue;
mc->mc_error = SET_ERROR(ESTALE);
2008-11-20 20:01:55 +00:00
}
zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
mc->mc_vd, mc->mc_offset,
zio->io_data, zio->io_size,
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 03:01:20 +00:00
ZIO_TYPE_WRITE, ZIO_PRIORITY_ASYNC_WRITE,
2009-01-15 21:59:39 +00:00
ZIO_FLAG_IO_REPAIR | (unexpected_errors ?
ZIO_FLAG_SELF_HEAL : 0), NULL, NULL));
2008-11-20 20:01:55 +00:00
}
}
}
static void
vdev_mirror_state_change(vdev_t *vd, int faulted, int degraded)
{
if (faulted == vd->vdev_children)
vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN,
VDEV_AUX_NO_REPLICAS);
else if (degraded + faulted != 0)
vdev_set_state(vd, B_FALSE, VDEV_STATE_DEGRADED, VDEV_AUX_NONE);
else
vdev_set_state(vd, B_FALSE, VDEV_STATE_HEALTHY, VDEV_AUX_NONE);
}
vdev_ops_t vdev_mirror_ops = {
vdev_mirror_open,
vdev_mirror_close,
vdev_default_asize,
vdev_mirror_io_start,
vdev_mirror_io_done,
vdev_mirror_state_change,
NULL,
NULL,
2008-11-20 20:01:55 +00:00
VDEV_TYPE_MIRROR, /* name of this vdev type */
B_FALSE /* not a leaf vdev */
};
vdev_ops_t vdev_replacing_ops = {
vdev_mirror_open,
vdev_mirror_close,
vdev_default_asize,
vdev_mirror_io_start,
vdev_mirror_io_done,
vdev_mirror_state_change,
NULL,
NULL,
2008-11-20 20:01:55 +00:00
VDEV_TYPE_REPLACING, /* name of this vdev type */
B_FALSE /* not a leaf vdev */
};
vdev_ops_t vdev_spare_ops = {
vdev_mirror_open,
vdev_mirror_close,
vdev_default_asize,
vdev_mirror_io_start,
vdev_mirror_io_done,
vdev_mirror_state_change,
NULL,
NULL,
2008-11-20 20:01:55 +00:00
VDEV_TYPE_SPARE, /* name of this vdev type */
B_FALSE /* not a leaf vdev */
};
Improve N-way mirror performance The read bandwidth of an N-way mirror can by increased by 50%, and the IOPs by 10%, by more carefully selecting the preferred leaf vdev. The existing algorthm selects a perferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the drives are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. Utilization can be improved by preferentially selecting the leaf vdev with the least pending IO. This prevents leaf vdevs from being starved and compensates for performance differences between disks in the mirror. Faster vdevs will be sent more work and the mirror performance will not be limitted by the slowest drive. In the common case where all the pending queues are full and there is no single least busy leaf vdev a batching stratagy is employed. Of the N least busy vdevs one is selected with equal probability to be the preferred vdev for T microseconds. Compared to randomly selecting a vdev to break the tie batching the requests greatly improves the odds of merging the requests in the Linux elevator. The testing results show a significant performance improvement for all four workloads tested. The workloads were generated using the fio benchmark and are as follows. 1) 1MB sequential reads from 16 threads to 16 files (MB/s). 2) 4KB sequential reads from 16 threads to 16 files (MB/s). 3) 1MB random reads from 16 threads to 16 files (IOP/s). 4) 4KB random reads from 16 threads to 16 files (IOP/s). | Pristine | With 1461 | | Sequential Random | Sequential Random | | 1MB 4KB 1MB 4KB | 1MB 4KB 1MB 4KB | | MB/s MB/s IO/s IO/s | MB/s MB/s IO/s IO/s | ---------------+-----------------------+------------------------+ 2 Striped | 226 243 11 304 | 222 255 11 299 | 2 2-Way Mirror | 302 324 16 534 | 433 448 23 571 | 2 3-Way Mirror | 429 458 24 714 | 648 648 41 808 | 2 4-Way Mirror | 562 601 36 849 | 816 828 82 926 | Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1461
2013-05-31 19:07:59 +00:00
#if defined(_KERNEL) && defined(HAVE_SPL)
module_param(zfs_vdev_mirror_switch_us, int, 0644);
MODULE_PARM_DESC(zfs_vdev_mirror_switch_us, "Switch mirrors every N usecs");
#endif