freebsd-nq/tools/debugscripts/gdbinit.i386

# $FreeBSD$
# Assembler-level macros for i386
# Disassemble the next 10 instructions.
define xi
x/10i $eip
end

# Top 12 words on stack
define xs
x/12x $esp
end

# Top 12 words from frame pointer
define xb
x/12x $ebp
end

# single step through calls and disassemble the next instruction
define z
ni
x/1i $eip
end

# single step over calls and disassemble the next instruction
define zs
si
x/1i $eip
end

# show current stack frame and first 4 parameters
define xp
printf "      esp: " 
output/x $esp
echo  (
output (((int)$ebp)-(int)$esp)/4-4
printf " words on stack)\n      ebp: " 
output/x $ebp
printf "\n      eip: " 
x/1i $eip
printf "Saved ebp: " 
output/x *(int*)$ebp
printf " (maximum of "  
output ((*(int*)$ebp)-(int)$ebp)/4-4
printf " parameters possible)\nSaved eip: " 
x/1i *(int*)($ebp+4)
printf "\nParm 1 at " 
output/x (int) ($ebp+8)
printf ":    " 
output (char*) *(int*)($ebp+8)
printf "\nParm 2 at " 
output/x (int) ($ebp+12)
printf ":    " 
output (char*) *(int*)($ebp+12)
printf "\nParm 3 at " 
output/x (int) ($ebp+16)
printf ":    " 
output (char*) *(int*)($ebp+16)
printf "\nParm 4 at " 
output/x (int) ($ebp+20)
printf ":    " 
output (char*) *(int*)($ebp+20)
echo \n
end
document xp
Show the register contents and the first four parameter
words of the current frame.
end

# show current stack frame and first 10 parameters
define xxp
printf "      esp: " 
output/x $esp
printf "\n      ebp: " 
output/x $ebp
printf "\n      eip: " 
x/1i $eip
printf "Saved ebp: " 
output/x *(int*)$ebp
printf " (maximum of "  
output ((*(int*)$ebp)-(int)$ebp)/4-4
printf " parameters possible)\nSaved eip: " 
x/1i *(int*)($ebp+4)
printf "\nParm  1 at " 
output/x (int) ($ebp+8)
printf ":    " 
output (char*) *(int*)($ebp+8)
printf "\nParm  2 at " 
output/x (int) ($ebp+12)
printf ":    " 
output (char*) *(int*)($ebp+12)
printf "\nParm  3 at " 
output/x (int) ($ebp+16)
printf ":    " 
output (char*) *(int*)($ebp+16)
printf "\nParm  4 at " 
output/x (int) ($ebp+20)
printf ":    " 
output (char*) *(int*)($ebp+20)
printf "\nParm  5 at " 
output/x (int) ($ebp+24)
printf ":    " 
output (char*) *(int*)($ebp+24)
printf "\nParm  6 at " 
output/x (int) ($ebp+28)
printf ":    " 
output (char*) *(int*)($ebp+28)
printf "\nParm  7 at " 
output/x (int) ($ebp+32)
printf ":    " 
output (char*) *(int*)($ebp+32)
printf "\nParm  8 at " 
output/x (int) ($ebp+36)
printf ":    " 
output (char*) *(int*)($ebp+36)
printf "\nParm  9 at " 
output/x (int) ($ebp+40)
printf ":    " 
output (char*) *(int*)($ebp+40)
printf "\nParm 10 at " 
output/x (int) ($ebp+44)
printf ":    " 
output (char*) *(int*)($ebp+44)
echo \n
end
document xxp
Show the register contents and the first ten parameter
words of the current frame.
end

# Show first to fifth parameters of current frame as int, int * and char *.
define xp0
x/12x *(int*)$esp
p *(int*)$esp
p (char*)*$esp
end
define xp1
x/12x *(int*)($ebp+4)
p *(int*)($ebp+4)
p (char**)($ebp+4)
end
define xp2
x/12x *(int*)($ebp+8)
p *(int*)($ebp+8)
p *(char**)($ebp+8)
end
define xp3
x/12x *(int*)($ebp+12)
p *(int*)($ebp+12)
p (char**)($ebp+12)
end
define xp4
x/12x *(int*)($ebp+16)
p *(int*)($ebp+16)
p (char**)($ebp+16)
end
document xp0
Show the first parameter of current stack frame in various formats
end
document xp1
Show the second parameter of current stack frame in various formats
end
document xp2
Show the third parameter of current stack frame in various formats
end
document xp3
Show the fourth parameter of current stack frame in various formats
end
document xp4
Show the fifth parameter of current stack frame in various formats
end

# Select frame 0 to 5 and show stack information.
define f0
f 0
xp
end
define f1
f 1
xp
end
define f2
f 2
xp
end
define f3
f 3
xp
end
define f4
f 4
xp
end
define f5
f 5
xp
end
document f0
Select stack frame 0 and show assembler-level details
end
document f1
Select stack frame 1 and show assembler-level details
end
document f2
Select stack frame 2 and show assembler-level details
end
document f3
Select stack frame 3 and show assembler-level details
end
document f4
Select stack frame 4 and show assembler-level details
end
document f5
Select stack frame 5 and show assembler-level details
end
document z
Single step 1 instruction (over calls) and show next instruction.
end
document zs
Single step 1 instruction (through calls) and show next instruction.
end
document xi
List the next 10 instructions from the current IP value
end
document xs
Show the last 12 words on stack in hex
end
document xb
Show 12 words starting at current BP value in hex
end

# pcb <pid>
# show contents of pcb, currently only i386.
define pcb
    set $nproc = nprocs
    set $aproc = allproc.lh_first
    set $proc = allproc.lh_first
    while (--$nproc >= 0)
        set $pptr = $proc.p_pptr
        if ($proc->p_pid == $arg0)
           set $pcba = $proc->p_threads.tqh_first->td_pcb
	   printf "ip: %08x sp: %08x bp: %08x bx: %08x\n", $pcba->pcb_eip, $pcba->pcb_esp, $pcba->pcb_ebp, $pcba->pcb_ebx
	   x/1i $pcba->pcb_eip
	   set $nproc = 0
        end
        set $aproc = $proc.p_list.le_next
        if ($aproc == 0 && $nproc > 0)
            set $aproc = zombproc
        end
        set $proc = $aproc
    end
end
document pcb
Show some pcb contents of process whose pid is specified.
end

# btr <frame>
# primitive backtrace.  frame is a memory address.
define btr
set $frame = $arg0
set $fno = 0
while (*(int *) $frame > 0xc0000000)
  set $myebp = *(int *) $frame
  set $myeip = *(int *) ($frame + 4)
  printf " frame %d at %p: ebp %8x, eip ", $fno, $frame, $myebp
  x/1i $myeip
  set $frame = $myebp
  set $fno = $fno + 1
end
end
document btr
Show a backtrace from the ebp address specified.  This can be used to get a backtrace from any stack resident in memory.  It's the user's responsiblity to ensure that the address is meaningful.
end

# btp <pid>
# backtrace for process <pid>.  Uses btr (machine dependent) to perform the backtrace.
# may produce nonsense.
define btp
    set $nproc = nprocs
    set $aproc = allproc.lh_first
    set $proc = allproc.lh_first
    while (--$nproc >= 0)
        if ($proc->p_pid == $arg0)
	   btr $proc->p_threads.tqh_first->td_pcb->pcb_ebp
	   set $nproc = 0
	else
           set $aproc = $proc.p_list.le_next
           if ($aproc == 0 && $nproc > 0)
              set $aproc = zombproc
           end
           set $proc = $aproc
        end
   end
end
document btp
Show a backtrace for the process whose pid is specified as a parameter.
end

# Do backtraces for all processes in the system.
# Uses btr (machine dependent) to perform the backtrace.
define btpa
    set $nproc = nprocs
    set $aproc = allproc.lh_first
    set $proc = allproc.lh_first
    printf "  pid    proc   uid  ppid  pgrp   flag stat comm         wchan\n"
    while (--$nproc >= 0)
        set $pptr = $proc.p_pptr
        if ($pptr == 0)
           set $pptr = $proc
        end
        if ($proc.p_stat)
            printf "%5d %08x %4d %5d %5d  %06x %d  %-10s   ", \
                   $proc.p_pid, $aproc, \
                   $proc.p_cred->p_ruid, $pptr->p_pid, \
                   $proc.p_pgrp->pg_id, $proc.p_flag, $proc.p_stat, \
                   &$proc.p_comm[0]
            if ($proc.p_wchan)
                if ($proc.p_wmesg)
                    printf "%s ", $proc.p_wmesg
                end
                printf "%x", $proc.p_wchan
            end
            printf "\n"
	   if ($proc->p_flag & 4)
	      btr $proc->p_threads.tqh_first->td_pcb->pcb_ebp
	   else
              echo (not loaded)\n
	   end
        end
        set $aproc = $proc.p_list.le_next
        if ($aproc == 0 && $nproc > 0)
            set $aproc = zombproc
        end
        set $proc = $aproc
    end
end
document btpa
Show backtraces for all processes in the system.
end

# Show backtrace for process selected with "defproc"
define btpp
btr $myvectorproc->p_threads.tqh_first->td_pcb->pcb_ebp
end
document btpp
Show a backtrace for the process previously selected with 'defproc'.
end

# Specific stack fram of process selected with "defproc".
define fr
set $fno = 0
set $searching = 1
set $frame = $myvectorproc->p_threads.tqh_first->td_pcb->pcb_ebp
while (($searching == 1) && (*(int *) $frame > 0xc0000000))
  set $myebp = *(int *) $frame
  set $myeip = *(int *) ($frame + 4)
  if ($fno == $arg0)
    printf " frame %d at %p: ebp %8x, eip ", $fno, $frame, $myebp
    x/1i $myeip
    printf "Called from %8x, stack frame at %8x\n", *(int *) ($myebp+4), *(int *) $myebp
    printf "last 20 local variables:\n"
    x/20x ($myebp-80)
    printf "call parameters:\n"
    x/8x ($myebp+8)
    set $searching = 0
  else
    set $frame = $myebp
    set $fno = $fno + 1
  end
end
if ($searching == 1)
  echo frame not found\n
end
end
document fr
Show the frame of the stack of the process previously selected with 'defproc'.
end