d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1f88a92ba9
freebsd-nq/sys/dev/pci/eisa_pci.c

128 lines
3.8 KiB
C
Raw Normal View History

Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
/*-
* Copyright (c) 1994,1995 Stefan Esser, Wolfgang StanglMeier
* Copyright (c) 2000 Michael Smith <msmith@freebsd.org>
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Use __FBSDID(). Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
/*
* PCI:EISA bridge support
*/
#include <sys/param.h>
#include <sys/kernel.h>
Add missing <sys/module.h> includes
2004-05-30 20:08:47 +00:00
#include <sys/module.h>
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
#include <sys/bus.h>
Prefer new location of pci include files (which have only been in the tree for two or more years now), except in a few places where there's code to be compatible with older versions of FreeBSD.
2003-08-22 06:42:59 +00:00
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
static int eisab_probe(device_t dev);
static int eisab_attach(device_t dev);
static device_method_t eisab_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, eisab_probe),
DEVMETHOD(device_attach, eisab_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
- There's no need to overwrite the default device method with the default one. Interestingly, these are actually the default for quite some time (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9) since r52045) but even recently added device drivers do this unnecessarily. Discussed with: jhb, marcel - While at it, use DEVMETHOD_END. Discussed with: jhb - Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
DEVMETHOD_END
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
};
static driver_t eisab_driver = {
"eisab",
eisab_methods,
0,
};
static devclass_t eisab_devclass;
DRIVER_MODULE(eisab, pci, eisab_driver, eisab_devclass, 0, 0);
static int
eisab_probe(device_t dev)
{
int matched = 0;
/*
* Generic match by class/subclass.
*/
if ((pci_get_class(dev) == PCIC_BRIDGE) &&
(pci_get_subclass(dev) == PCIS_BRIDGE_EISA))
matched = 1;
/*
* Some bridges don't correctly report their class.
*/
switch (pci_get_devid(dev)) {
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
case 0x04828086: /* may show up as PCI-HOST or 0:0 */
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
matched = 1;
break;
default:
break;
}
if (matched) {
device_set_desc(dev, "PCI-EISA bridge");
return(-10000);
}
return(ENXIO);
}
static int
eisab_attach(device_t dev)
{
/*
* Attach an EISA bus. Note that we can only have one EISA bus.
*/
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
if (!devclass_get_device(devclass_find("eisa"), 0))
device_add_child(dev, "eisa", -1);
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
/*
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
* Attach an ISA bus as well, since the EISA bus may have ISA
* cards installed, and we may have no EISA support in the system.
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
*/
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
if (!devclass_get_device(devclass_find("isa"), 0))
device_add_child(dev, "isa", -1);
bus_generic_attach(dev);
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
return(0);
}
Reference in New Issue Copy Permalink