147 lines
6.3 KiB
Plaintext
147 lines
6.3 KiB
Plaintext
|
FLOPPY INSTALLATION NOTES
|
||
|
|
FreeBSD
|
||
|
|
Release 1.1.5
|
||
|
|
|
||
|
|
Welcome to FreeBSD! This document has been put together in an effort
|
||
|
|
to make initial installation of the system from floppy as easy as possible.
|
||
|
|
It also provides a simple description for those eager to get started as soon as
|
||
|
|
possible. Please see the file README.INSTALL for more detailed installation
|
||
|
|
instructions.
|
||
|
|
|
||
|
|
1. To install FreeBSD you will need 3 (or 4 if you choose to add the optional
|
||
|
|
DOS floppy) floppies, as well as the bulk of the distribution on some
|
||
|
|
other medium (floppy, tape, CD, etc). If you've retrieved this release
|
||
|
|
from the net, you'll first have to make the floppies yourself using
|
||
|
|
the supplied images.
|
||
|
|
|
||
|
|
Due to the differences in PC configurations, we've found it necessary
|
||
|
|
to provide multiple initial boot images that provide kernels for
|
||
|
|
different types of systems.
|
||
|
|
|
||
|
|
If your disk controller is one of:
|
||
|
|
|
||
|
|
MFM / RLL / IDE / ST506
|
||
|
|
Adaptec 154x series
|
||
|
|
Adaptec 174x series
|
||
|
|
Buslogic 545S
|
||
|
|
|
||
|
|
Then please use the disk image: kcopy_ah.flp
|
||
|
|
to construct your boot floppy.
|
||
|
|
|
||
|
|
If your disk controller is one of:
|
||
|
|
|
||
|
|
Bustek 742a
|
||
|
|
UltraStore 14F or 34F
|
||
|
|
|
||
|
|
Then please use the disk image: kcopy_bt.flp
|
||
|
|
to construct your boot floppy.
|
||
|
|
|
||
|
|
Next, make a second floppy from the disk image: filesyst.flp
|
||
|
|
You'll need this for the second stage of the boot process.
|
||
|
|
|
||
|
|
Finally, make a third floppy from the disk image: cpio.flp
|
||
|
|
You'll need this for the last stage of the boot process.
|
||
|
|
|
||
|
|
If you want to use any of the optional tools in the tools
|
||
|
|
subdirectory of the ftp distribution site, these should be
|
||
|
|
copied directly to a DOS formatted disk (using, either mcopy
|
||
|
|
or mount -t pcfs). This disk is referred to later as the
|
||
|
|
optional "dos" floppy.
|
||
|
|
|
||
|
|
If installing more than one operating system on a disk, then
|
||
|
|
it is recommended that the dos floppy at least include the
|
||
|
|
os-bs boot manager. If downloading files via a modem and SLIP
|
||
|
|
is not available, then the dos floppy should include kermit.
|
||
|
|
You'll have the option of loading the programs that are on
|
||
|
|
the dos floppy in the last stage of the boot process.
|
||
|
|
|
||
|
|
2. Boot the first floppy. When it asks you to insert the file system floppy,
|
||
|
|
insert the second floppy ``filesyst.flp.'' Follow the instructions
|
||
|
|
that floppy gives you. If partitions already exist on the hard disk,
|
||
|
|
then by default FreeBSD attempts to install itself at the end of these.
|
||
|
|
Before rebooting, note the type of disk it says to copy the kernel
|
||
|
|
to: ``sd0a'' or ``wd0a'' (``sd0a'' is for SCSI systems, ``wd0a'' is
|
||
|
|
for all others.) When the system halts, go on to the next step.
|
||
|
|
|
||
|
|
3. Boot the first floppy again, but this time when it asks
|
||
|
|
you to insert the file system floppy, just press the return key.
|
||
|
|
Follow the instructions that the floppy gives you. When you see
|
||
|
|
the ``kc>'' prompt, type ``copy'' (without quotes). At the next prompt,
|
||
|
|
``copy kernel to>'', type either ``sd0a'' or ``wd0a'' as given in
|
||
|
|
the previous step. When the system halts, go on to the next step.
|
||
|
|
|
||
|
|
4. Making sure that there's no floppy in the drive, press return to boot
|
||
|
|
from the hard disk. After it has booted and is asking what drive the
|
||
|
|
cpio floppy is in, insert the third floppy ``cpio.flp'' into a
|
||
|
|
floppy drive and answer the question about what drive it is in.
|
||
|
|
Note that 0 is the same as DOS drive A:, and 1 is the same as DOS
|
||
|
|
drive B:
|
||
|
|
|
||
|
|
5. After the cpio floppy has been copied to the disk, remove it from the
|
||
|
|
drive. If there are programs on the dos-floppy that you would like
|
||
|
|
installed, then insert this disk in a floppy drive, again specifying
|
||
|
|
the drive to read from.
|
||
|
|
|
||
|
|
6. After the cpio (or optional dos) floppy has been copied to the disk,
|
||
|
|
enter `halt' at the command prompt.
|
||
|
|
|
||
|
|
7. When the system asks you to press the return key to reboot, first
|
||
|
|
remove the floppy and then press the return key to boot from the hard
|
||
|
|
disk.
|
||
|
|
|
||
|
|
8. At this point you will get 4 errors from the fsck on boot, these
|
||
|
|
are normal and are caused by files that were open when the
|
||
|
|
/dev entries were built - just ignore them. The system will
|
||
|
|
correct these errors and then halt, after which you should press
|
||
|
|
the return key again to reboot with a clean system.
|
||
|
|
|
||
|
|
9. Congratulations, you've got the mini FreeBSD system on your disk!
|
||
|
|
|
||
|
|
10. Follow the instructions about set_tmp_dir and extract that
|
||
|
|
will come on your screen after you've pressed the return key.
|
||
|
|
|
||
|
|
11. Run the configure command to set up some of the /etc files by
|
||
|
|
typing ``configure''. You will have to edit /etc/netstart after
|
||
|
|
this if you have a networking interface.
|
||
|
|
|
||
|
|
12. Reboot so that the system comes up multiuser by typing ``reboot''.
|
||
|
|
|
||
|
|
13. You are now running FreeBSD! Congratulations! You may now continue
|
||
|
|
with installing the source distribution, or stop here for now.
|
||
|
|
|
||
|
|
14. The file /magic contains the special sh commands used during
|
||
|
|
installation. Should you need to use them you can do the following.
|
||
|
|
|
||
|
|
/bin/sh
|
||
|
|
. /magic
|
||
|
|
|
||
|
|
15. If your disk has several operating systems, you may want to
|
||
|
|
install the Thomas Wolfram's os-bs boot manager for selecting
|
||
|
|
which system to boot. This works well with DOS, OS/2, FreeBSD
|
||
|
|
and other systems. To install it, boot the system with MS-DOS
|
||
|
|
and insert the dos-floppy of the FreeBSD install suite in
|
||
|
|
floppy drive A:. Then enter the DOS commands:
|
||
|
|
> A:
|
||
|
|
> os-bs135
|
||
|
|
> cd os-bs
|
||
|
|
> os-bs
|
||
|
|
A menu should now appear on the screen. Use the cursor keys
|
||
|
|
to highlight the install option and hit ENTER. Simply follow the
|
||
|
|
instructions from there.
|
||
|
|
|
||
|
|
For more information about the ob-bs program, including its
|
||
|
|
capabilities and limitations, see the file `readme.1st' in the
|
||
|
|
os-bs directory.
|
||
|
|
|
||
|
|
If you choose not to install os-bs, then fdisk can be used to
|
||
|
|
change the boot system. This is done by making the primary
|
||
|
|
partition for the boot system active. FreeBSD has an fdisk
|
||
|
|
command that can be used for this purpose as well.
|
||
|
|
|
||
|
|
16. In addition to the FreeBSD source and binary distributions, many
|
||
|
|
additional packages, such as X11 and TeX, may be obtained from
|
||
|
|
freebsd.cdrom.com - please have a look around! You may also find
|
||
|
|
this a good time to read the release notes in RELNOTES.FreeBSD.
|
||
|
|
|
||
|
|
End of $Id: floppy.install_notes,v 1.15 1994/05/15 01:10:17 rgrimes Exp $
|