freebsd-nq/sys/dev/ofw/ofw_iicbus.c

237 lines
6.8 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2009, Nathan Whitehorn <nwhitehorn@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/libkern.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <dev/iicbus/iicbus.h>
#include <dev/iicbus/iiconf.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include "iicbus_if.h"
/* Methods */
static device_probe_t ofw_iicbus_probe;
static device_attach_t ofw_iicbus_attach;
static device_t ofw_iicbus_add_child(device_t dev, u_int order,
const char *name, int unit);
static const struct ofw_bus_devinfo *ofw_iicbus_get_devinfo(device_t bus,
device_t dev);
static device_method_t ofw_iicbus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ofw_iicbus_probe),
DEVMETHOD(device_attach, ofw_iicbus_attach),
/* Bus interface */
DEVMETHOD(bus_child_pnpinfo_str, ofw_bus_gen_child_pnpinfo_str),
DEVMETHOD(bus_add_child, ofw_iicbus_add_child),
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_devinfo, ofw_iicbus_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
DEVMETHOD_END
};
struct ofw_iicbus_devinfo {
struct iicbus_ivar opd_dinfo; /* Must be the first. */
struct ofw_bus_devinfo opd_obdinfo;
};
static devclass_t ofwiicbus_devclass;
DEFINE_CLASS_1(iicbus, ofw_iicbus_driver, ofw_iicbus_methods,
sizeof(struct iicbus_softc), iicbus_driver);
DRIVER_MODULE(ofw_iicbus, iicbb, ofw_iicbus_driver, ofwiicbus_devclass, 0, 0);
DRIVER_MODULE(ofw_iicbus, iichb, ofw_iicbus_driver, ofwiicbus_devclass, 0, 0);
MODULE_VERSION(ofw_iicbus, 1);
MODULE_DEPEND(ofw_iicbus, iicbus, 1, 1, 1);
static int
ofw_iicbus_probe(device_t dev)
{
if (ofw_bus_get_node(dev) == -1)
return (ENXIO);
device_set_desc(dev, "OFW I2C bus");
return (0);
}
static int
ofw_iicbus_attach(device_t dev)
{
struct iicbus_softc *sc = IICBUS_SOFTC(dev);
struct ofw_iicbus_devinfo *dinfo;
phandle_t child, node, root;
Allow i2c bus speed to be configured via hints, FDT data, and sysctl. The current support for controlling i2c bus speed is an inconsistant mess. There are 4 symbolic speed values defined, UNKNOWN, SLOW, FAST, FASTEST. It seems to be universally assumed that SLOW means the standard 100KHz rate from the original spec. Nothing ever calls iicbus_reset() with a speed of FAST, although some drivers would treat it as the 400KHz standard speed. Mostly iicbus_reset() is called with the speed set to UNKNOWN or FASTEST, and there's really no telling what any individual driver will do with those. The speed of an i2c bus is limited by the speed of the slowest device on the bus. This means that generally the bus speed needs to be configured based on the board/system and the components within it. Historically for i2c we've configured with device hints. Newer systems use FDT data and it documents a clock-frequency property for i2c busses. Hobbyists and developers are likely to want on the fly changes. These changes provide all 3 methods, but do not require any existing drivers to change to use the new facilities. This adds an iicbus method, iicbus_get_frequency(dev, speed) that gets the frequency for the requested symbolic speed. If the symbolic speed is SLOW or if there is no speed configured for the bus, the returned value is 100KHz, always. Otherwise, if bus speed is configured by hints, fdt, tunable, or sysctl, that speed is returned. It also adds a helper function, iicbus_init_frequency() that any bus driver subclassed from iicbus can initialize the frequency from some other source of info. Initial driver implementations are provided for Freescale and TI. Differential Revision: https://reviews.freebsd.org/D1174 PR: 195009
2014-11-18 01:54:31 +00:00
pcell_t freq, paddr;
device_t childdev;
ssize_t compatlen;
char compat[255];
char *curstr;
u_int iic_addr_8bit = 0;
sc->dev = dev;
mtx_init(&sc->lock, "iicbus", NULL, MTX_DEF);
Allow i2c bus speed to be configured via hints, FDT data, and sysctl. The current support for controlling i2c bus speed is an inconsistant mess. There are 4 symbolic speed values defined, UNKNOWN, SLOW, FAST, FASTEST. It seems to be universally assumed that SLOW means the standard 100KHz rate from the original spec. Nothing ever calls iicbus_reset() with a speed of FAST, although some drivers would treat it as the 400KHz standard speed. Mostly iicbus_reset() is called with the speed set to UNKNOWN or FASTEST, and there's really no telling what any individual driver will do with those. The speed of an i2c bus is limited by the speed of the slowest device on the bus. This means that generally the bus speed needs to be configured based on the board/system and the components within it. Historically for i2c we've configured with device hints. Newer systems use FDT data and it documents a clock-frequency property for i2c busses. Hobbyists and developers are likely to want on the fly changes. These changes provide all 3 methods, but do not require any existing drivers to change to use the new facilities. This adds an iicbus method, iicbus_get_frequency(dev, speed) that gets the frequency for the requested symbolic speed. If the symbolic speed is SLOW or if there is no speed configured for the bus, the returned value is 100KHz, always. Otherwise, if bus speed is configured by hints, fdt, tunable, or sysctl, that speed is returned. It also adds a helper function, iicbus_init_frequency() that any bus driver subclassed from iicbus can initialize the frequency from some other source of info. Initial driver implementations are provided for Freescale and TI. Differential Revision: https://reviews.freebsd.org/D1174 PR: 195009
2014-11-18 01:54:31 +00:00
/*
* If there is a clock-frequency property for the device node, use it as
* the starting value for the bus frequency. Then call the common
* routine that handles the tunable/sysctl which allows the FDT value to
* be overridden by the user.
*/
node = ofw_bus_get_node(dev);
freq = 0;
OF_getencprop(node, "clock-frequency", &freq, sizeof(freq));
iicbus_init_frequency(dev, freq);
iicbus_reset(dev, IIC_FASTEST, 0, NULL);
bus_generic_probe(dev);
bus_enumerate_hinted_children(dev);
/*
* Check if we're running on a PowerMac, needed for the I2C
* address below.
*/
root = OF_peer(0);
compatlen = OF_getprop(root, "compatible", compat,
sizeof(compat));
if (compatlen != -1) {
for (curstr = compat; curstr < compat + compatlen;
curstr += strlen(curstr) + 1) {
if (strncmp(curstr, "MacRISC", 7) == 0)
iic_addr_8bit = 1;
}
}
/*
* Attach those children represented in the device tree.
*/
Allow i2c bus speed to be configured via hints, FDT data, and sysctl. The current support for controlling i2c bus speed is an inconsistant mess. There are 4 symbolic speed values defined, UNKNOWN, SLOW, FAST, FASTEST. It seems to be universally assumed that SLOW means the standard 100KHz rate from the original spec. Nothing ever calls iicbus_reset() with a speed of FAST, although some drivers would treat it as the 400KHz standard speed. Mostly iicbus_reset() is called with the speed set to UNKNOWN or FASTEST, and there's really no telling what any individual driver will do with those. The speed of an i2c bus is limited by the speed of the slowest device on the bus. This means that generally the bus speed needs to be configured based on the board/system and the components within it. Historically for i2c we've configured with device hints. Newer systems use FDT data and it documents a clock-frequency property for i2c busses. Hobbyists and developers are likely to want on the fly changes. These changes provide all 3 methods, but do not require any existing drivers to change to use the new facilities. This adds an iicbus method, iicbus_get_frequency(dev, speed) that gets the frequency for the requested symbolic speed. If the symbolic speed is SLOW or if there is no speed configured for the bus, the returned value is 100KHz, always. Otherwise, if bus speed is configured by hints, fdt, tunable, or sysctl, that speed is returned. It also adds a helper function, iicbus_init_frequency() that any bus driver subclassed from iicbus can initialize the frequency from some other source of info. Initial driver implementations are provided for Freescale and TI. Differential Revision: https://reviews.freebsd.org/D1174 PR: 195009
2014-11-18 01:54:31 +00:00
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
/*
* Try to get the I2C address first from the i2c-address
2009-06-14 00:05:38 +00:00
* property, then try the reg property. It moves around
* on different systems.
*/
if (OF_getencprop(child, "i2c-address", &paddr,
sizeof(paddr)) == -1)
if (OF_getencprop(child, "reg", &paddr,
sizeof(paddr)) == -1)
continue;
/*
* Now set up the I2C and OFW bus layer devinfo and add it
* to the bus.
*/
dinfo = malloc(sizeof(struct ofw_iicbus_devinfo), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (dinfo == NULL)
continue;
/*
* FreeBSD drivers expect I2C addresses to be expressed as
* 8-bit values. Apple OFW data contains 8-bit values, but
* Linux FDT data contains 7-bit values, so shift them up to
* 8-bit format.
*/
if (iic_addr_8bit)
dinfo->opd_dinfo.addr = paddr;
else
dinfo->opd_dinfo.addr = paddr << 1;
if (ofw_bus_gen_setup_devinfo(&dinfo->opd_obdinfo, child) !=
0) {
free(dinfo, M_DEVBUF);
continue;
}
childdev = device_add_child(dev, NULL, -1);
resource_list_init(&dinfo->opd_dinfo.rl);
ofw_bus_intr_to_rl(childdev, child,
&dinfo->opd_dinfo.rl, NULL);
device_set_ivars(childdev, dinfo);
}
/* Register bus */
OF_device_register_xref(OF_xref_from_node(node), dev);
return (bus_generic_attach(dev));
}
static device_t
ofw_iicbus_add_child(device_t dev, u_int order, const char *name, int unit)
{
device_t child;
struct ofw_iicbus_devinfo *devi;
child = device_add_child_ordered(dev, order, name, unit);
if (child == NULL)
return (child);
2009-06-14 00:05:38 +00:00
devi = malloc(sizeof(struct ofw_iicbus_devinfo), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (devi == NULL) {
device_delete_child(dev, child);
return (0);
}
2009-06-14 00:05:38 +00:00
/*
* NULL all the OFW-related parts of the ivars for non-OFW
* children.
*/
devi->opd_obdinfo.obd_node = -1;
devi->opd_obdinfo.obd_name = NULL;
devi->opd_obdinfo.obd_compat = NULL;
devi->opd_obdinfo.obd_type = NULL;
devi->opd_obdinfo.obd_model = NULL;
device_set_ivars(child, devi);
2009-06-14 00:05:38 +00:00
return (child);
}
static const struct ofw_bus_devinfo *
ofw_iicbus_get_devinfo(device_t bus, device_t dev)
{
struct ofw_iicbus_devinfo *dinfo;
dinfo = device_get_ivars(dev);
return (&dinfo->opd_obdinfo);
}