d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
28ca6c20cf
freebsd-nq/sys/net/bpfdesc.h

162 lines
6.0 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
sys: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 3-Clause license. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. Special thanks to Wind River for providing access to "The Duke of Highlander" tool: an older (2014) run over FreeBSD tree was useful as a starting point.
2017-11-20 19:43:44 +00:00
* SPDX-License-Identifier: BSD-3-Clause
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Copyright (c) 1990, 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from the Stanford/CMU enet packet filter,
* (net/enet.c) distributed as part of 4.3BSD, and code contributed
* to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
* Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Renumber copyright clause 4 Renumber cluase 4 to 3, per what everybody else did when BSD granted them permission to remove clause 3. My insistance on keeping the same numbering for legal reasons is too pedantic, so give up on that point. Submitted by: Jan Schaumann <jschauma@stevens.edu> Pull Request: https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
* 3. Neither the name of the University nor the names of its contributors
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)bpfdesc.h 8.1 (Berkeley) 6/10/93
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Make idempotent. Submitted by: Paul
1994-08-21 05:11:48 +00:00
#ifndef _NET_BPFDESC_H_
#define _NET_BPFDESC_H_
Make bpf's read timeout feature work more correctly with select/poll, and therefore with pthreads. I doubt there is any way to make this 100% semantically identical to the way it behaves in unthreaded programs with blocking reads, but the solution here should do the right thing for all reasonable usage patterns. The basic idea is to schedule a callout for the read timeout when a select/poll is done. When the callout fires, it ends the select if it is still in progress, or marks the state as "timed out" if the select has already ended for some other reason. Additional logic in bpfread then does the right thing in the case where the timeout has fired. Note, I co-opted the bd_state member of the bpf_d structure. It has been present in the structure since the initial import of 4.4-lite, but as far as I can tell it has never been used. PR: kern/22063 and bin/31649 MFC after: 3 days
2001-12-14 22:17:54 +00:00
#include <sys/callout.h>
select() DKI is now in <sys/selinfo.h>.
2001-01-09 04:33:49 +00:00
#include <sys/selinfo.h>
Rework locking in BPF code to remove rwlock from fast path. On high packets rate the contention on rwlock in bpf_*tap*() functions can lead to packets dropping. To avoid this, migrate this code to use epoch(9) KPI and ConcurrencyKit's lists. * all lists changed to use CK_LIST; * reference counting added to bpf_if and bpf_d; * now bpf_if references ifnet and releases this reference on destroy; * each bpf_d descriptor references bpf_if when it is attached; * new struct bpf_program_buffer introduced to keep BPF filter programs; * bpf_program_buffer, bpf_d and bpf_if structures are freed by epoch_call(); * bpf_freelist and ifnet_departure event are no longer needed, thus both are removed; Reviewed by: melifaro Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D20224
2019-05-13 13:45:28 +00:00
#include <sys/ck.h>
Introduce new sysctl variable: net.bpf.stats. This sysctl variable can be used to pass statistics regarding dropped, matched and received packet counts from the kernel to user-space. While we are here introduce a new counter for filtered or matched packets. We currently keep track of packets received or dropped by the bpf device, but not how many packets actually matched the bpf filter. -Introduce net.bpf.stats sysctl OID -Move sysctl variables after the function prototypes so we can reference bpf_stats_sysctl(9) without build errors. -Introduce bpf descriptor counter which is used mainly for sizing of the xbpf_d array. -Introduce a xbpf_d structure which will act as an external representation of the bpf_d structure. -Add a the following members to the bpfd structure: bd_fcount - Number of packets which matched bpf filter bd_pid - PID which opened the bpf device bd_pcomm - Process name which opened the device. It should be noted that it's possible that the process which opened the device could be long gone at the time of stats collection. An example might be a process that opens the bpf device forks then exits leaving the child process with the bpf fd. Reviewed by: mdodd
2005-07-24 17:21:17 +00:00
#include <sys/conf.h>
Use count(9) api for the bpf(4) statistics. Currently each bfp descriptor uses u64 variables to maintain its counters. On interfaces with high packet rate this leads to unnecessary contention and inaccurate reporting. PR: kern/205320 Reported by: elofu17 at hotmail.com MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D14726
2018-03-20 22:57:06 +00:00
#include <sys/counter.h>
Rework locking in BPF code to remove rwlock from fast path. On high packets rate the contention on rwlock in bpf_*tap*() functions can lead to packets dropping. To avoid this, migrate this code to use epoch(9) KPI and ConcurrencyKit's lists. * all lists changed to use CK_LIST; * reference counting added to bpf_if and bpf_d; * now bpf_if references ifnet and releases this reference on destroy; * each bpf_d descriptor references bpf_if when it is attached; * new struct bpf_program_buffer introduced to keep BPF filter programs; * bpf_program_buffer, bpf_d and bpf_if structures are freed by epoch_call(); * bpf_freelist and ifnet_departure event are no longer needed, thus both are removed; Reviewed by: melifaro Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D20224
2019-05-13 13:45:28 +00:00
#include <sys/epoch.h>
Introduce new sysctl variable: net.bpf.stats. This sysctl variable can be used to pass statistics regarding dropped, matched and received packet counts from the kernel to user-space. While we are here introduce a new counter for filtered or matched packets. We currently keep track of packets received or dropped by the bpf device, but not how many packets actually matched the bpf filter. -Introduce net.bpf.stats sysctl OID -Move sysctl variables after the function prototypes so we can reference bpf_stats_sysctl(9) without build errors. -Introduce bpf descriptor counter which is used mainly for sizing of the xbpf_d array. -Introduce a xbpf_d structure which will act as an external representation of the bpf_d structure. -Add a the following members to the bpfd structure: bd_fcount - Number of packets which matched bpf filter bd_pid - PID which opened the bpf device bd_pcomm - Process name which opened the device. It should be noted that it's possible that the process which opened the device could be long gone at the time of stats collection. An example might be a process that opens the bpf device forks then exits leaving the child process with the bpf fd. Reviewed by: mdodd
2005-07-24 17:21:17 +00:00
#include <net/if.h>
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Descriptor associated with each open bpf file.
*/
Introduce support for zero-copy BPF buffering, which reduces the overhead of packet capture by allowing a user process to directly "loan" buffer memory to the kernel rather than using read(2) to explicitly copy data from kernel address space. The user process will issue new BPF ioctls to set the shared memory buffer mode and provide pointers to buffers and their size. The kernel then wires and maps the pages into kernel address space using sf_buf(9), which on supporting architectures will use the direct map region. The current "buffered" access mode remains the default, and support for zero-copy buffers must, for the time being, be explicitly enabled using a sysctl for the kernel to accept requests to use it. The kernel and user process synchronize use of the buffers with atomic operations, avoiding the need for system calls under load; the user process may use select()/poll()/kqueue() to manage blocking while waiting for network data if the user process is able to consume data faster than the kernel generates it. Patchs to libpcap are available to allow libpcap applications to transparently take advantage of this support. Detailed information on the new API may be found in bpf(4), including specific atomic operations and memory barriers required to synchronize buffer use safely. These changes modify the base BPF implementation to (roughly) abstrac the current buffer model, allowing the new shared memory model to be added, and add new monitoring statistics for netstat to print. The implementation, with the exception of some monitoring hanges that break the netstat monitoring ABI for BPF, will be MFC'd. Zerocopy bpf buffers are still considered experimental are disabled by default. To experiment with this new facility, adjust the net.bpf.zerocopy_enable sysctl variable to 1. Changes to libpcap will be made available as a patch for the time being, and further refinements to the implementation are expected. Sponsored by: Seccuris Inc. In collaboration with: rwatson Tested by: pwood, gallatin MFC after: 4 months [1] [1] Certain portions will probably not be MFCed, specifically things that can break the monitoring ABI.
2008-03-24 13:49:17 +00:00
struct zbuf;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct bpf_d {
Rework locking in BPF code to remove rwlock from fast path. On high packets rate the contention on rwlock in bpf_*tap*() functions can lead to packets dropping. To avoid this, migrate this code to use epoch(9) KPI and ConcurrencyKit's lists. * all lists changed to use CK_LIST; * reference counting added to bpf_if and bpf_d; * now bpf_if references ifnet and releases this reference on destroy; * each bpf_d descriptor references bpf_if when it is attached; * new struct bpf_program_buffer introduced to keep BPF filter programs; * bpf_program_buffer, bpf_d and bpf_if structures are freed by epoch_call(); * bpf_freelist and ifnet_departure event are no longer needed, thus both are removed; Reviewed by: melifaro Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D20224
2019-05-13 13:45:28 +00:00
CK_LIST_ENTRY(bpf_d) bd_next; /* Linked list of descriptors */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Introduce support for zero-copy BPF buffering, which reduces the overhead of packet capture by allowing a user process to directly "loan" buffer memory to the kernel rather than using read(2) to explicitly copy data from kernel address space. The user process will issue new BPF ioctls to set the shared memory buffer mode and provide pointers to buffers and their size. The kernel then wires and maps the pages into kernel address space using sf_buf(9), which on supporting architectures will use the direct map region. The current "buffered" access mode remains the default, and support for zero-copy buffers must, for the time being, be explicitly enabled using a sysctl for the kernel to accept requests to use it. The kernel and user process synchronize use of the buffers with atomic operations, avoiding the need for system calls under load; the user process may use select()/poll()/kqueue() to manage blocking while waiting for network data if the user process is able to consume data faster than the kernel generates it. Patchs to libpcap are available to allow libpcap applications to transparently take advantage of this support. Detailed information on the new API may be found in bpf(4), including specific atomic operations and memory barriers required to synchronize buffer use safely. These changes modify the base BPF implementation to (roughly) abstrac the current buffer model, allowing the new shared memory model to be added, and add new monitoring statistics for netstat to print. The implementation, with the exception of some monitoring hanges that break the netstat monitoring ABI for BPF, will be MFC'd. Zerocopy bpf buffers are still considered experimental are disabled by default. To experiment with this new facility, adjust the net.bpf.zerocopy_enable sysctl variable to 1. Changes to libpcap will be made available as a patch for the time being, and further refinements to the implementation are expected. Sponsored by: Seccuris Inc. In collaboration with: rwatson Tested by: pwood, gallatin MFC after: 4 months [1] [1] Certain portions will probably not be MFCed, specifically things that can break the monitoring ABI.
2008-03-24 13:49:17 +00:00
* Buffer slots: two memory buffers store the incoming packets.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* The model has three slots. Sbuf is always occupied.
* sbuf (store) - Receive interrupt puts packets here.
Update comment for struct bpf_d: we now store buffered packets for BPF in malloc'd storage, not in mbuf clusters.
2007-01-29 14:41:03 +00:00
* hbuf (hold) - When sbuf is full, put buffer here and
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* wakeup read (replace sbuf with fbuf).
Update comment for struct bpf_d: we now store buffered packets for BPF in malloc'd storage, not in mbuf clusters.
2007-01-29 14:41:03 +00:00
* fbuf (free) - When read is done, put buffer here.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* On receiving, if sbuf is full and fbuf is 0, packet is dropped.
*/
caddr_t bd_sbuf; /* store slot */
caddr_t bd_hbuf; /* hold slot */
caddr_t bd_fbuf; /* free slot */
Changes to resolve races in bpfread() and catchpacket() that, at worst, cause kernel panics. Add a flag to the bpf descriptor to indicate whether the hold buffer is in use. In bpfread(), set the "hold buffer in use" flag before dropping the descriptor lock during the call to bpf_uiomove(). Everywhere else the hold buffer is used or changed, wait while the hold buffer is in use by bpfread(). Add a KASSERT in bpfread() after re-acquiring the descriptor lock to assist uncovering any additional hold buffer races.
2012-12-10 16:14:44 +00:00
int bd_hbuf_in_use; /* don't rotate buffers */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int bd_slen; /* current length of store buffer */
int bd_hlen; /* current length of hold buffer */
int bd_bufsize; /* absolute length of buffers */
struct bpf_if * bd_bif; /* interface descriptor */
u_long bd_rtout; /* Read timeout in 'ticks' */
Introduce two new ioctl(2) commands, BIOCLOCK and BIOCSETWF. These commands enhance the security of bpf(4) by further relinquishing the privilege of the bpf(4) consumer (assuming the ioctl commands are being implemented). Once BIOCLOCK is executed, the device becomes locked which prevents the execution of ioctl(2) commands which can change the underly parameters of the bpf(4) device. An example might be the setting of bpf(4) filter programs or attaching to different network interfaces. BIOCSETWF can be used to set write filters for outgoing packets. Currently if a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used as a raw socket, regardless of consumer's UID. Write filters give users the ability to constrain which packets can be sent through the bpf(4) descriptor. These features are currently implemented by a couple programs which came from OpenBSD, such as the new dhclient and pflogd. -Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify whether a read or write filter is to be set. -Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the filter program on the mbuf data once we move the packet in from user-space. -Rather than execute two uiomove operations, (one for the link header and the other for the packet data), execute one and manually copy the linker header into the sockaddr structure via bcopy. -Restructure bpf_setf to compensate for write filters, as well as read. -Adjust bpf(4) stats structures to include a bd_locked member. It should be noted that the FreeBSD and OpenBSD implementations differ a bit in the sense that we unconditionally enforce the lock, where OpenBSD enforces it only if the calling credential is not root. Idea from: OpenBSD Reviewed by: mlaier
2005-08-22 19:35:48 +00:00
struct bpf_insn *bd_rfilter; /* read filter code */
struct bpf_insn *bd_wfilter; /* write filter code */
Always embed pointer to BPF JIT function in BPF descriptor to avoid inconsistency when opt_bpf.h is not included. Reviewed by: rwatson Approved by: re (rwatson)
2009-08-12 17:28:53 +00:00
void *bd_bfilter; /* binary filter code */
Use count(9) api for the bpf(4) statistics. Currently each bfp descriptor uses u64 variables to maintain its counters. On interfaces with high packet rate this leads to unnecessary contention and inaccurate reporting. PR: kern/205320 Reported by: elofu17 at hotmail.com MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D14726
2018-03-20 22:57:06 +00:00
counter_u64_t bd_rcount; /* number of packets received */
counter_u64_t bd_dcount; /* number of packets dropped */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
u_char bd_promisc; /* true if listening promiscuously */
u_char bd_state; /* idle, waiting, or timed out */
u_char bd_immediate; /* true to return on packet arrival */
- Improve performace for writer-only BPF users. Linux and Solaris (at least OpenSolaris) has PF_PACKET socket families to send raw ethernet frames. The only FreeBSD interface that can be used to send raw frames is BPF. As a result, many programs like cdpd, lldpd, various dhcp stuff uses BPF only to send data. This leads us to the situation when software like cdpd, being run on high-traffic-volume interface significantly reduces overall performance since we have to acquire additional locks for every packet. Here we add sysctl that changes BPF behavior in the following way: If program came and opens BPF socket without explicitly specifyin read filter we assume it to be write-only and add it to special writer-only per-interface list. This makes bpf_peers_present() return 0, so no additional overhead is introduced. After filter is supplied, descriptor is added to original per-interface list permitting packets to be captured. Unfortunately, pcap_open_live() sets catch-all filter itself for the purpose of setting snap length. Fortunately, most programs explicitly sets (event catch-all) filter after that. tcpdump(1) is a good example. So a bit hackis approach is taken: we upgrade description only after second BIOCSETF is received. Sysctl is named net.bpf.optimize_writers and is turned off by default. - While here, document all sysctl variables in bpf.4 Sponsored by Yandex LLC Reviewed by: glebius (previous version) Reviewed by: silence on -net@ Approved by: (mentor) MFC after: 4 weeks
2012-04-06 06:55:21 +00:00
u_char bd_writer; /* non-zero if d is writer-only */
Implement pseudo_AF_HDRCMPLT, which controls the state of the 'header completion' flag. If set, the interface output routine will assume that the packet already has a valid link-level source address. This defaults to off (the address is overwritten) PR: kern/10680 Submitted by: "Christopher N . Harrell" <cnh@mindspring.net> Obtained from: NetBSD
1999-10-15 05:07:00 +00:00
int bd_hdrcmplt; /* false to fill in src lladdr automatically */
Add three new ioctl(2) commands for bpf(4). - BIOCGDIRECTION and BIOCSDIRECTION get or set the setting determining whether incoming, outgoing, or all packets on the interface should be returned by BPF. Set to BPF_D_IN to see only incoming packets on the interface. Set to BPF_D_INOUT to see packets originating locally and remotely on the interface. Set to BPF_D_OUT to see only outgoing packets on the interface. This setting is initialized to BPF_D_INOUT by default. BIOCGSEESENT and BIOCSSEESENT are obsoleted by these but kept for backward compatibility. - BIOCFEEDBACK sets packet feedback mode. This allows injected packets to be fed back as input to the interface when output via the interface is successful. When BPF_D_INOUT direction is set, injected outgoing packet is not returned by BPF to avoid duplication. This flag is initialized to zero by default. Note that libpcap has been modified to support BPF_D_OUT direction for pcap_setdirection(3) and PCAP_D_OUT direction is functional now. Reviewed by: rwatson
2007-02-26 22:24:14 +00:00
int bd_direction; /* select packet direction */
Implement flexible BPF timestamping framework. - Allow setting format, resolution and accuracy of BPF time stamps per listener. Previously, we were only able to use microtime(9). Now we can set various resolutions and accuracies with ioctl(2) BIOCSTSTAMP command. Similarly, we can get the current resolution and accuracy with BIOCGTSTAMP command. Document all supported options in bpf(4) and their uses. - Introduce new time stamp 'struct bpf_ts' and header 'struct bpf_xhdr'. The new time stamp has both 64-bit second and fractional parts. bpf_xhdr has this time stamp instead of 'struct timeval' for bh_tstamp. The new structures let us use bh_tstamp of same size on both 32-bit and 64-bit platforms without adding additional shims for 32-bit binaries. On 64-bit platforms, size of BPF header does not change compared to bpf_hdr as its members are already all 64-bit long. On 32-bit platforms, the size may increase by 8 bytes. For backward compatibility, struct bpf_hdr with struct timeval is still the default header unless new time stamp format is explicitly requested. However, the behaviour may change in the future and all relevant code is wrapped around "#ifdef BURN_BRIDGES" for now. - Add experimental support for tagging mbufs with time stamps from a lower layer, e.g., device driver. Currently, mbuf_tags(9) is used to tag mbufs. The time stamps must be uptime in 'struct bintime' format as binuptime(9) and getbinuptime(9) do. Reviewed by: net@
2010-06-15 19:28:44 +00:00
int bd_tstamp; /* select time stamping function */
Add three new ioctl(2) commands for bpf(4). - BIOCGDIRECTION and BIOCSDIRECTION get or set the setting determining whether incoming, outgoing, or all packets on the interface should be returned by BPF. Set to BPF_D_IN to see only incoming packets on the interface. Set to BPF_D_INOUT to see packets originating locally and remotely on the interface. Set to BPF_D_OUT to see only outgoing packets on the interface. This setting is initialized to BPF_D_INOUT by default. BIOCGSEESENT and BIOCSSEESENT are obsoleted by these but kept for backward compatibility. - BIOCFEEDBACK sets packet feedback mode. This allows injected packets to be fed back as input to the interface when output via the interface is successful. When BPF_D_INOUT direction is set, injected outgoing packet is not returned by BPF to avoid duplication. This flag is initialized to zero by default. Note that libpcap has been modified to support BPF_D_OUT direction for pcap_setdirection(3) and PCAP_D_OUT direction is functional now. Reviewed by: rwatson
2007-02-26 22:24:14 +00:00
int bd_feedback; /* true to feed back sent packets */
Give the BPF the ability to generate signals when a packet is available. Reviewed by: pst & wollman Submitted by: grossman@cygnus.com
1995-06-15 18:11:00 +00:00
int bd_async; /* non-zero if packet reception should generate signal */
int bd_sig; /* signal to send upon packet reception */
I got another batch of suggestions for cosmetic changes from bde.
1998-11-11 10:56:07 +00:00
struct sigio * bd_sigio; /* information for async I/O */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct selinfo bd_sel; /* bsd select info */
Fix old panic when BPF consumer attaches to destroying interface. 'flags' field is added to the end of bpf_if structure. Currently the only flag is BPFIF_FLAG_DYING which is set on bpf detach and checked by bpf_attachd() Problem can be easily triggered on SMP stable/[89] by the following command (sort of): 'while true; do ifconfig vlan222 create vlan 222 vlandev em0 up ; tcpdump -pi vlan222 & ; ifconfig vlan222 destroy ; done' Fix possible use-after-free when BPF detaches itself from interface, freeing bpf_bif memory, while interface is still UP and there can be routes via this interface. Freeing is now delayed till ifnet_departure_event is received via eventhandler(9) api. Convert bpfd rwlock back to mutex due lack of performance gain (currently checking if packet matches filter is done without holding bpfd lock and we have to acquire write lock if packet matches) Approved by: kib(mentor) MFC in: 4 weeks
2012-05-21 22:17:29 +00:00
struct mtx bd_lock; /* per-descriptor lock */
Make bpf's read timeout feature work more correctly with select/poll, and therefore with pthreads. I doubt there is any way to make this 100% semantically identical to the way it behaves in unthreaded programs with blocking reads, but the solution here should do the right thing for all reasonable usage patterns. The basic idea is to schedule a callout for the read timeout when a select/poll is done. When the callout fires, it ends the select if it is still in progress, or marks the state as "timed out" if the select has already ended for some other reason. Additional logic in bpfread then does the right thing in the case where the timeout has fired. Note, I co-opted the bd_state member of the bpf_d structure. It has been present in the structure since the initial import of 4.4-lite, but as far as I can tell it has never been used. PR: kern/22063 and bin/31649 MFC after: 3 days
2001-12-14 22:17:54 +00:00
struct callout bd_callout; /* for BPF timeouts with select */
Modify the MAC Framework so that instead of embedding a (struct label) in various kernel objects to represent security data, we embed a (struct label *) pointer, which now references labels allocated using a UMA zone (mac_label.c). This allows the size and shape of struct label to be varied without changing the size and shape of these kernel objects, which become part of the frozen ABI with 5-STABLE. This opens the door for boot-time selection of the number of label slots, and hence changes to the bound on the number of simultaneous labeled policies at boot-time instead of compile-time. This also makes it easier to embed label references in new objects as required for locking/caching with fine-grained network stack locking, such as inpcb structures. This change also moves us further in the direction of hiding the structure of kernel objects from MAC policy modules, not to mention dramatically reducing the number of '&' symbols appearing in both the MAC Framework and MAC policy modules, and improving readability. While this results in minimal performance change with MAC enabled, it will observably shrink the size of a number of critical kernel data structures for the !MAC case, and should have a small (but measurable) performance benefit (i.e., struct vnode, struct socket) do to memory conservation and reduced cost of zeroing memory. NOTE: Users of MAC must recompile their kernel and all MAC modules as a result of this change. Because this is an API change, third party MAC modules will also need to be updated to make less use of the '&' symbol. Suggestions from: bmilekic Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2003-11-12 03:14:31 +00:00
struct label *bd_label; /* MAC label for descriptor */
Use count(9) api for the bpf(4) statistics. Currently each bfp descriptor uses u64 variables to maintain its counters. On interfaces with high packet rate this leads to unnecessary contention and inaccurate reporting. PR: kern/205320 Reported by: elofu17 at hotmail.com MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D14726
2018-03-20 22:57:06 +00:00
counter_u64_t bd_fcount; /* number of packets which matched filter */
Introduce new sysctl variable: net.bpf.stats. This sysctl variable can be used to pass statistics regarding dropped, matched and received packet counts from the kernel to user-space. While we are here introduce a new counter for filtered or matched packets. We currently keep track of packets received or dropped by the bpf device, but not how many packets actually matched the bpf filter. -Introduce net.bpf.stats sysctl OID -Move sysctl variables after the function prototypes so we can reference bpf_stats_sysctl(9) without build errors. -Introduce bpf descriptor counter which is used mainly for sizing of the xbpf_d array. -Introduce a xbpf_d structure which will act as an external representation of the bpf_d structure. -Add a the following members to the bpfd structure: bd_fcount - Number of packets which matched bpf filter bd_pid - PID which opened the bpf device bd_pcomm - Process name which opened the device. It should be noted that it's possible that the process which opened the device could be long gone at the time of stats collection. An example might be a process that opens the bpf device forks then exits leaving the child process with the bpf fd. Reviewed by: mdodd
2005-07-24 17:21:17 +00:00
pid_t bd_pid; /* PID which created descriptor */
Introduce two new ioctl(2) commands, BIOCLOCK and BIOCSETWF. These commands enhance the security of bpf(4) by further relinquishing the privilege of the bpf(4) consumer (assuming the ioctl commands are being implemented). Once BIOCLOCK is executed, the device becomes locked which prevents the execution of ioctl(2) commands which can change the underly parameters of the bpf(4) device. An example might be the setting of bpf(4) filter programs or attaching to different network interfaces. BIOCSETWF can be used to set write filters for outgoing packets. Currently if a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used as a raw socket, regardless of consumer's UID. Write filters give users the ability to constrain which packets can be sent through the bpf(4) descriptor. These features are currently implemented by a couple programs which came from OpenBSD, such as the new dhclient and pflogd. -Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify whether a read or write filter is to be set. -Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the filter program on the mbuf data once we move the packet in from user-space. -Rather than execute two uiomove operations, (one for the link header and the other for the packet data), execute one and manually copy the linker header into the sockaddr structure via bcopy. -Restructure bpf_setf to compensate for write filters, as well as read. -Adjust bpf(4) stats structures to include a bd_locked member. It should be noted that the FreeBSD and OpenBSD implementations differ a bit in the sense that we unconditionally enforce the lock, where OpenBSD enforces it only if the calling credential is not root. Idea from: OpenBSD Reviewed by: mlaier
2005-08-22 19:35:48 +00:00
int bd_locked; /* true if descriptor is locked */
Introduce support for zero-copy BPF buffering, which reduces the overhead of packet capture by allowing a user process to directly "loan" buffer memory to the kernel rather than using read(2) to explicitly copy data from kernel address space. The user process will issue new BPF ioctls to set the shared memory buffer mode and provide pointers to buffers and their size. The kernel then wires and maps the pages into kernel address space using sf_buf(9), which on supporting architectures will use the direct map region. The current "buffered" access mode remains the default, and support for zero-copy buffers must, for the time being, be explicitly enabled using a sysctl for the kernel to accept requests to use it. The kernel and user process synchronize use of the buffers with atomic operations, avoiding the need for system calls under load; the user process may use select()/poll()/kqueue() to manage blocking while waiting for network data if the user process is able to consume data faster than the kernel generates it. Patchs to libpcap are available to allow libpcap applications to transparently take advantage of this support. Detailed information on the new API may be found in bpf(4), including specific atomic operations and memory barriers required to synchronize buffer use safely. These changes modify the base BPF implementation to (roughly) abstrac the current buffer model, allowing the new shared memory model to be added, and add new monitoring statistics for netstat to print. The implementation, with the exception of some monitoring hanges that break the netstat monitoring ABI for BPF, will be MFC'd. Zerocopy bpf buffers are still considered experimental are disabled by default. To experiment with this new facility, adjust the net.bpf.zerocopy_enable sysctl variable to 1. Changes to libpcap will be made available as a patch for the time being, and further refinements to the implementation are expected. Sponsored by: Seccuris Inc. In collaboration with: rwatson Tested by: pwood, gallatin MFC after: 4 months [1] [1] Certain portions will probably not be MFCed, specifically things that can break the monitoring ABI.
2008-03-24 13:49:17 +00:00
u_int bd_bufmode; /* Current buffer mode. */
Use count(9) api for the bpf(4) statistics. Currently each bfp descriptor uses u64 variables to maintain its counters. On interfaces with high packet rate this leads to unnecessary contention and inaccurate reporting. PR: kern/205320 Reported by: elofu17 at hotmail.com MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D14726
2018-03-20 22:57:06 +00:00
counter_u64_t bd_wcount; /* number of packets written */
counter_u64_t bd_wfcount; /* number of packets that matched write filter */
counter_u64_t bd_wdcount; /* number of packets dropped during a write */
counter_u64_t bd_zcopy; /* number of zero copy operations */
Provide compat32 shims for bpf(4), except zero-copy facilities. bd_compat32 field of struct bpf_d is kept unconditionally to not impose the requirement of including "opt_compat.h" on all numerous users of bpfdesc.h. Submitted by: jhb (version for 6.x) Reviewed and tested by: emaste MFC after: 2 weeks
2010-04-25 16:43:41 +00:00
u_char bd_compat32; /* 32-bit stream on LP64 system */
Rework locking in BPF code to remove rwlock from fast path. On high packets rate the contention on rwlock in bpf_*tap*() functions can lead to packets dropping. To avoid this, migrate this code to use epoch(9) KPI and ConcurrencyKit's lists. * all lists changed to use CK_LIST; * reference counting added to bpf_if and bpf_d; * now bpf_if references ifnet and releases this reference on destroy; * each bpf_d descriptor references bpf_if when it is attached; * new struct bpf_program_buffer introduced to keep BPF filter programs; * bpf_program_buffer, bpf_d and bpf_if structures are freed by epoch_call(); * bpf_freelist and ifnet_departure event are no longer needed, thus both are removed; Reviewed by: melifaro Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D20224
2019-05-13 13:45:28 +00:00
volatile u_int bd_refcnt;
struct epoch_context epoch_ctx;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
};
Make bpf's read timeout feature work more correctly with select/poll, and therefore with pthreads. I doubt there is any way to make this 100% semantically identical to the way it behaves in unthreaded programs with blocking reads, but the solution here should do the right thing for all reasonable usage patterns. The basic idea is to schedule a callout for the read timeout when a select/poll is done. When the callout fires, it ends the select if it is still in progress, or marks the state as "timed out" if the select has already ended for some other reason. Additional logic in bpfread then does the right thing in the case where the timeout has fired. Note, I co-opted the bd_state member of the bpf_d structure. It has been present in the structure since the initial import of 4.4-lite, but as far as I can tell it has never been used. PR: kern/22063 and bin/31649 MFC after: 3 days
2001-12-14 22:17:54 +00:00
/* Values for bd_state */
#define BPF_IDLE 0 /* no select in progress */
#define BPF_WAITING 1 /* waiting for read timeout in select */
#define BPF_TIMED_OUT 2 /* read timeout has expired in select */
Fix old panic when BPF consumer attaches to destroying interface. 'flags' field is added to the end of bpf_if structure. Currently the only flag is BPFIF_FLAG_DYING which is set on bpf detach and checked by bpf_attachd() Problem can be easily triggered on SMP stable/[89] by the following command (sort of): 'while true; do ifconfig vlan222 create vlan 222 vlandev em0 up ; tcpdump -pi vlan222 & ; ifconfig vlan222 destroy ; done' Fix possible use-after-free when BPF detaches itself from interface, freeing bpf_bif memory, while interface is still UP and there can be routes via this interface. Freeing is now delayed till ifnet_departure_event is received via eventhandler(9) api. Convert bpfd rwlock back to mutex due lack of performance gain (currently checking if packet matches filter is done without holding bpfd lock and we have to acquire write lock if packet matches) Approved by: kib(mentor) MFC in: 4 weeks
2012-05-21 22:17:29 +00:00
#define BPFD_LOCK(bd) mtx_lock(&(bd)->bd_lock)
#define BPFD_UNLOCK(bd) mtx_unlock(&(bd)->bd_lock)
#define BPFD_LOCK_ASSERT(bd) mtx_assert(&(bd)->bd_lock, MA_OWNED)
Add mutexes to the entire bpf subsystem to make it MPSAFE. Previously reviewed by: jhb, bde
2001-02-16 17:10:28 +00:00
- Improve BPF locking model. Interface locks and descriptor locks are converted from mutex(9) to rwlock(9). This greately improves performance: in most common case we need to acquire 1 reader lock instead of 2 mutexes. - Remove filter(descriptor) (reader) lock in bpf_mtap[2] This was suggested by glebius@. We protect filter by requesting interface writer lock on filter change. - Cover struct bpf_if under BPF_INTERNAL define. This permits including bpf.h without including rwlock stuff. However, this is is temporary solution, struct bpf_if should be made opaque for any external caller. Found by: Dmitrij Tejblum <tejblum@yandex-team.ru> Sponsored by: Yandex LLC Reviewed by: glebius (previous version) Reviewed by: silence on -net@ Approved by: (mentor) MFC after: 3 weeks
2012-04-06 06:53:58 +00:00
#define BPF_PID_REFRESH(bd, td) (bd)->bd_pid = (td)->td_proc->p_pid
#define BPF_PID_REFRESH_CUR(bd) (bd)->bd_pid = curthread->td_proc->p_pid
Introduce new sysctl variable: net.bpf.stats. This sysctl variable can be used to pass statistics regarding dropped, matched and received packet counts from the kernel to user-space. While we are here introduce a new counter for filtered or matched packets. We currently keep track of packets received or dropped by the bpf device, but not how many packets actually matched the bpf filter. -Introduce net.bpf.stats sysctl OID -Move sysctl variables after the function prototypes so we can reference bpf_stats_sysctl(9) without build errors. -Introduce bpf descriptor counter which is used mainly for sizing of the xbpf_d array. -Introduce a xbpf_d structure which will act as an external representation of the bpf_d structure. -Add a the following members to the bpfd structure: bd_fcount - Number of packets which matched bpf filter bd_pid - PID which opened the bpf device bd_pcomm - Process name which opened the device. It should be noted that it's possible that the process which opened the device could be long gone at the time of stats collection. An example might be a process that opens the bpf device forks then exits leaving the child process with the bpf fd. Reviewed by: mdodd
2005-07-24 17:21:17 +00:00
/*
* External representation of the bpf descriptor
*/
struct xbpf_d {
Introduce support for zero-copy BPF buffering, which reduces the overhead of packet capture by allowing a user process to directly "loan" buffer memory to the kernel rather than using read(2) to explicitly copy data from kernel address space. The user process will issue new BPF ioctls to set the shared memory buffer mode and provide pointers to buffers and their size. The kernel then wires and maps the pages into kernel address space using sf_buf(9), which on supporting architectures will use the direct map region. The current "buffered" access mode remains the default, and support for zero-copy buffers must, for the time being, be explicitly enabled using a sysctl for the kernel to accept requests to use it. The kernel and user process synchronize use of the buffers with atomic operations, avoiding the need for system calls under load; the user process may use select()/poll()/kqueue() to manage blocking while waiting for network data if the user process is able to consume data faster than the kernel generates it. Patchs to libpcap are available to allow libpcap applications to transparently take advantage of this support. Detailed information on the new API may be found in bpf(4), including specific atomic operations and memory barriers required to synchronize buffer use safely. These changes modify the base BPF implementation to (roughly) abstrac the current buffer model, allowing the new shared memory model to be added, and add new monitoring statistics for netstat to print. The implementation, with the exception of some monitoring hanges that break the netstat monitoring ABI for BPF, will be MFC'd. Zerocopy bpf buffers are still considered experimental are disabled by default. To experiment with this new facility, adjust the net.bpf.zerocopy_enable sysctl variable to 1. Changes to libpcap will be made available as a patch for the time being, and further refinements to the implementation are expected. Sponsored by: Seccuris Inc. In collaboration with: rwatson Tested by: pwood, gallatin MFC after: 4 months [1] [1] Certain portions will probably not be MFCed, specifically things that can break the monitoring ABI.
2008-03-24 13:49:17 +00:00
u_int bd_structsize; /* Size of this structure. */
Introduce new sysctl variable: net.bpf.stats. This sysctl variable can be used to pass statistics regarding dropped, matched and received packet counts from the kernel to user-space. While we are here introduce a new counter for filtered or matched packets. We currently keep track of packets received or dropped by the bpf device, but not how many packets actually matched the bpf filter. -Introduce net.bpf.stats sysctl OID -Move sysctl variables after the function prototypes so we can reference bpf_stats_sysctl(9) without build errors. -Introduce bpf descriptor counter which is used mainly for sizing of the xbpf_d array. -Introduce a xbpf_d structure which will act as an external representation of the bpf_d structure. -Add a the following members to the bpfd structure: bd_fcount - Number of packets which matched bpf filter bd_pid - PID which opened the bpf device bd_pcomm - Process name which opened the device. It should be noted that it's possible that the process which opened the device could be long gone at the time of stats collection. An example might be a process that opens the bpf device forks then exits leaving the child process with the bpf fd. Reviewed by: mdodd
2005-07-24 17:21:17 +00:00
u_char bd_promisc;
u_char bd_immediate;
Introduce support for zero-copy BPF buffering, which reduces the overhead of packet capture by allowing a user process to directly "loan" buffer memory to the kernel rather than using read(2) to explicitly copy data from kernel address space. The user process will issue new BPF ioctls to set the shared memory buffer mode and provide pointers to buffers and their size. The kernel then wires and maps the pages into kernel address space using sf_buf(9), which on supporting architectures will use the direct map region. The current "buffered" access mode remains the default, and support for zero-copy buffers must, for the time being, be explicitly enabled using a sysctl for the kernel to accept requests to use it. The kernel and user process synchronize use of the buffers with atomic operations, avoiding the need for system calls under load; the user process may use select()/poll()/kqueue() to manage blocking while waiting for network data if the user process is able to consume data faster than the kernel generates it. Patchs to libpcap are available to allow libpcap applications to transparently take advantage of this support. Detailed information on the new API may be found in bpf(4), including specific atomic operations and memory barriers required to synchronize buffer use safely. These changes modify the base BPF implementation to (roughly) abstrac the current buffer model, allowing the new shared memory model to be added, and add new monitoring statistics for netstat to print. The implementation, with the exception of some monitoring hanges that break the netstat monitoring ABI for BPF, will be MFC'd. Zerocopy bpf buffers are still considered experimental are disabled by default. To experiment with this new facility, adjust the net.bpf.zerocopy_enable sysctl variable to 1. Changes to libpcap will be made available as a patch for the time being, and further refinements to the implementation are expected. Sponsored by: Seccuris Inc. In collaboration with: rwatson Tested by: pwood, gallatin MFC after: 4 months [1] [1] Certain portions will probably not be MFCed, specifically things that can break the monitoring ABI.
2008-03-24 13:49:17 +00:00
u_char __bd_pad[6];
Introduce new sysctl variable: net.bpf.stats. This sysctl variable can be used to pass statistics regarding dropped, matched and received packet counts from the kernel to user-space. While we are here introduce a new counter for filtered or matched packets. We currently keep track of packets received or dropped by the bpf device, but not how many packets actually matched the bpf filter. -Introduce net.bpf.stats sysctl OID -Move sysctl variables after the function prototypes so we can reference bpf_stats_sysctl(9) without build errors. -Introduce bpf descriptor counter which is used mainly for sizing of the xbpf_d array. -Introduce a xbpf_d structure which will act as an external representation of the bpf_d structure. -Add a the following members to the bpfd structure: bd_fcount - Number of packets which matched bpf filter bd_pid - PID which opened the bpf device bd_pcomm - Process name which opened the device. It should be noted that it's possible that the process which opened the device could be long gone at the time of stats collection. An example might be a process that opens the bpf device forks then exits leaving the child process with the bpf fd. Reviewed by: mdodd
2005-07-24 17:21:17 +00:00
int bd_hdrcmplt;
Add three new ioctl(2) commands for bpf(4). - BIOCGDIRECTION and BIOCSDIRECTION get or set the setting determining whether incoming, outgoing, or all packets on the interface should be returned by BPF. Set to BPF_D_IN to see only incoming packets on the interface. Set to BPF_D_INOUT to see packets originating locally and remotely on the interface. Set to BPF_D_OUT to see only outgoing packets on the interface. This setting is initialized to BPF_D_INOUT by default. BIOCGSEESENT and BIOCSSEESENT are obsoleted by these but kept for backward compatibility. - BIOCFEEDBACK sets packet feedback mode. This allows injected packets to be fed back as input to the interface when output via the interface is successful. When BPF_D_INOUT direction is set, injected outgoing packet is not returned by BPF to avoid duplication. This flag is initialized to zero by default. Note that libpcap has been modified to support BPF_D_OUT direction for pcap_setdirection(3) and PCAP_D_OUT direction is functional now. Reviewed by: rwatson
2007-02-26 22:24:14 +00:00
int bd_direction;
int bd_feedback;
Introduce new sysctl variable: net.bpf.stats. This sysctl variable can be used to pass statistics regarding dropped, matched and received packet counts from the kernel to user-space. While we are here introduce a new counter for filtered or matched packets. We currently keep track of packets received or dropped by the bpf device, but not how many packets actually matched the bpf filter. -Introduce net.bpf.stats sysctl OID -Move sysctl variables after the function prototypes so we can reference bpf_stats_sysctl(9) without build errors. -Introduce bpf descriptor counter which is used mainly for sizing of the xbpf_d array. -Introduce a xbpf_d structure which will act as an external representation of the bpf_d structure. -Add a the following members to the bpfd structure: bd_fcount - Number of packets which matched bpf filter bd_pid - PID which opened the bpf device bd_pcomm - Process name which opened the device. It should be noted that it's possible that the process which opened the device could be long gone at the time of stats collection. An example might be a process that opens the bpf device forks then exits leaving the child process with the bpf fd. Reviewed by: mdodd
2005-07-24 17:21:17 +00:00
int bd_async;
Introduce support for zero-copy BPF buffering, which reduces the overhead of packet capture by allowing a user process to directly "loan" buffer memory to the kernel rather than using read(2) to explicitly copy data from kernel address space. The user process will issue new BPF ioctls to set the shared memory buffer mode and provide pointers to buffers and their size. The kernel then wires and maps the pages into kernel address space using sf_buf(9), which on supporting architectures will use the direct map region. The current "buffered" access mode remains the default, and support for zero-copy buffers must, for the time being, be explicitly enabled using a sysctl for the kernel to accept requests to use it. The kernel and user process synchronize use of the buffers with atomic operations, avoiding the need for system calls under load; the user process may use select()/poll()/kqueue() to manage blocking while waiting for network data if the user process is able to consume data faster than the kernel generates it. Patchs to libpcap are available to allow libpcap applications to transparently take advantage of this support. Detailed information on the new API may be found in bpf(4), including specific atomic operations and memory barriers required to synchronize buffer use safely. These changes modify the base BPF implementation to (roughly) abstrac the current buffer model, allowing the new shared memory model to be added, and add new monitoring statistics for netstat to print. The implementation, with the exception of some monitoring hanges that break the netstat monitoring ABI for BPF, will be MFC'd. Zerocopy bpf buffers are still considered experimental are disabled by default. To experiment with this new facility, adjust the net.bpf.zerocopy_enable sysctl variable to 1. Changes to libpcap will be made available as a patch for the time being, and further refinements to the implementation are expected. Sponsored by: Seccuris Inc. In collaboration with: rwatson Tested by: pwood, gallatin MFC after: 4 months [1] [1] Certain portions will probably not be MFCed, specifically things that can break the monitoring ABI.
2008-03-24 13:49:17 +00:00
u_int64_t bd_rcount;
u_int64_t bd_dcount;
u_int64_t bd_fcount;
Introduce new sysctl variable: net.bpf.stats. This sysctl variable can be used to pass statistics regarding dropped, matched and received packet counts from the kernel to user-space. While we are here introduce a new counter for filtered or matched packets. We currently keep track of packets received or dropped by the bpf device, but not how many packets actually matched the bpf filter. -Introduce net.bpf.stats sysctl OID -Move sysctl variables after the function prototypes so we can reference bpf_stats_sysctl(9) without build errors. -Introduce bpf descriptor counter which is used mainly for sizing of the xbpf_d array. -Introduce a xbpf_d structure which will act as an external representation of the bpf_d structure. -Add a the following members to the bpfd structure: bd_fcount - Number of packets which matched bpf filter bd_pid - PID which opened the bpf device bd_pcomm - Process name which opened the device. It should be noted that it's possible that the process which opened the device could be long gone at the time of stats collection. An example might be a process that opens the bpf device forks then exits leaving the child process with the bpf fd. Reviewed by: mdodd
2005-07-24 17:21:17 +00:00
int bd_sig;
int bd_slen;
int bd_hlen;
int bd_bufsize;
pid_t bd_pid;
char bd_ifname[IFNAMSIZ];
Introduce two new ioctl(2) commands, BIOCLOCK and BIOCSETWF. These commands enhance the security of bpf(4) by further relinquishing the privilege of the bpf(4) consumer (assuming the ioctl commands are being implemented). Once BIOCLOCK is executed, the device becomes locked which prevents the execution of ioctl(2) commands which can change the underly parameters of the bpf(4) device. An example might be the setting of bpf(4) filter programs or attaching to different network interfaces. BIOCSETWF can be used to set write filters for outgoing packets. Currently if a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used as a raw socket, regardless of consumer's UID. Write filters give users the ability to constrain which packets can be sent through the bpf(4) descriptor. These features are currently implemented by a couple programs which came from OpenBSD, such as the new dhclient and pflogd. -Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify whether a read or write filter is to be set. -Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the filter program on the mbuf data once we move the packet in from user-space. -Rather than execute two uiomove operations, (one for the link header and the other for the packet data), execute one and manually copy the linker header into the sockaddr structure via bcopy. -Restructure bpf_setf to compensate for write filters, as well as read. -Adjust bpf(4) stats structures to include a bd_locked member. It should be noted that the FreeBSD and OpenBSD implementations differ a bit in the sense that we unconditionally enforce the lock, where OpenBSD enforces it only if the calling credential is not root. Idea from: OpenBSD Reviewed by: mlaier
2005-08-22 19:35:48 +00:00
int bd_locked;
Introduce support for zero-copy BPF buffering, which reduces the overhead of packet capture by allowing a user process to directly "loan" buffer memory to the kernel rather than using read(2) to explicitly copy data from kernel address space. The user process will issue new BPF ioctls to set the shared memory buffer mode and provide pointers to buffers and their size. The kernel then wires and maps the pages into kernel address space using sf_buf(9), which on supporting architectures will use the direct map region. The current "buffered" access mode remains the default, and support for zero-copy buffers must, for the time being, be explicitly enabled using a sysctl for the kernel to accept requests to use it. The kernel and user process synchronize use of the buffers with atomic operations, avoiding the need for system calls under load; the user process may use select()/poll()/kqueue() to manage blocking while waiting for network data if the user process is able to consume data faster than the kernel generates it. Patchs to libpcap are available to allow libpcap applications to transparently take advantage of this support. Detailed information on the new API may be found in bpf(4), including specific atomic operations and memory barriers required to synchronize buffer use safely. These changes modify the base BPF implementation to (roughly) abstrac the current buffer model, allowing the new shared memory model to be added, and add new monitoring statistics for netstat to print. The implementation, with the exception of some monitoring hanges that break the netstat monitoring ABI for BPF, will be MFC'd. Zerocopy bpf buffers are still considered experimental are disabled by default. To experiment with this new facility, adjust the net.bpf.zerocopy_enable sysctl variable to 1. Changes to libpcap will be made available as a patch for the time being, and further refinements to the implementation are expected. Sponsored by: Seccuris Inc. In collaboration with: rwatson Tested by: pwood, gallatin MFC after: 4 months [1] [1] Certain portions will probably not be MFCed, specifically things that can break the monitoring ABI.
2008-03-24 13:49:17 +00:00
u_int64_t bd_wcount;
u_int64_t bd_wfcount;
u_int64_t bd_wdcount;
u_int64_t bd_zcopy;
int bd_bufmode;
/*
* Allocate 4 64 bit unsigned integers for future expansion so we do
* not have to worry about breaking the ABI.
*/
u_int64_t bd_spare[4];
Introduce new sysctl variable: net.bpf.stats. This sysctl variable can be used to pass statistics regarding dropped, matched and received packet counts from the kernel to user-space. While we are here introduce a new counter for filtered or matched packets. We currently keep track of packets received or dropped by the bpf device, but not how many packets actually matched the bpf filter. -Introduce net.bpf.stats sysctl OID -Move sysctl variables after the function prototypes so we can reference bpf_stats_sysctl(9) without build errors. -Introduce bpf descriptor counter which is used mainly for sizing of the xbpf_d array. -Introduce a xbpf_d structure which will act as an external representation of the bpf_d structure. -Add a the following members to the bpfd structure: bd_fcount - Number of packets which matched bpf filter bd_pid - PID which opened the bpf device bd_pcomm - Process name which opened the device. It should be noted that it's possible that the process which opened the device could be long gone at the time of stats collection. An example might be a process that opens the bpf device forks then exits leaving the child process with the bpf fd. Reviewed by: mdodd
2005-07-24 17:21:17 +00:00
};
Fix old panic when BPF consumer attaches to destroying interface. 'flags' field is added to the end of bpf_if structure. Currently the only flag is BPFIF_FLAG_DYING which is set on bpf detach and checked by bpf_attachd() Problem can be easily triggered on SMP stable/[89] by the following command (sort of): 'while true; do ifconfig vlan222 create vlan 222 vlandev em0 up ; tcpdump -pi vlan222 & ; ifconfig vlan222 destroy ; done' Fix possible use-after-free when BPF detaches itself from interface, freeing bpf_bif memory, while interface is still UP and there can be routes via this interface. Freeing is now delayed till ifnet_departure_event is received via eventhandler(9) api. Convert bpfd rwlock back to mutex due lack of performance gain (currently checking if packet matches filter is done without holding bpfd lock and we have to acquire write lock if packet matches) Approved by: kib(mentor) MFC in: 4 weeks
2012-05-21 22:17:29 +00:00
#define BPFIF_FLAG_DYING 1 /* Reject new bpf consumers */
Make idempotent. Submitted by: Paul
1994-08-21 05:11:48 +00:00
#endif
Reference in New Issue Copy Permalink