d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
290dc24b4d
freebsd-nq/sys/dev/isp/isp_freebsd.c

2340 lines
61 KiB
C
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
/* $FreeBSD$ */
Add support for the Qlogic ISP SCSI && FC/AL Adapters
1998-04-22 17:54:58 +00:00
/*
* Platform (FreeBSD) dependent common attachment code for Qlogic adapters.
*
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
* Copyright (c) 1997, 1998, 1999, 2000, 2001 by Matthew Jacob
Add support for the Qlogic ISP SCSI && FC/AL Adapters
1998-04-22 17:54:58 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
some copyright cleanups
2000-09-21 20:16:04 +00:00
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
Add support for the Qlogic ISP SCSI && FC/AL Adapters
1998-04-22 17:54:58 +00:00
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <dev/isp/isp_freebsd.h>
Add a comment as to where stdarg.h applies.
2000-08-03 03:05:50 +00:00
#include <machine/stdarg.h> /* for use by isp_prt below */
Add support for the Qlogic ISP SCSI && FC/AL Adapters
1998-04-22 17:54:58 +00:00
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
static void isp_intr_enable(void *);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
static void isp_cam_async(void *, u_int32_t, struct cam_path *, void *);
static void isp_poll(struct cam_sim *);
static void isp_relsim(void *);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
static timeout_t isp_watchdog;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
static void isp_action(struct cam_sim *, union ccb *);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
static struct ispsoftc *isplist = NULL;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
void
clarify headers;move uninit to outer layer;remove watchdog
1998-12-28 19:22:27 +00:00
isp_attach(struct ispsoftc *isp)
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
{
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
int primary, secondary;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
struct ccb_setasync csa;
struct cam_devq *devq;
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
struct cam_sim *sim;
struct cam_path *path;
/*
* Establish (in case of 12X0) which bus is the primary.
*/
primary = 0;
secondary = 1;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
/*
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
* Create the device queue for our SIM(s).
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
*/
Add in isp_debug variable. It defaults to zero unless CAMDEBUG is defined where it defaults to one. Change simq width allocation to the max number of commands supported by the HBA after f/w fires up- not the constant MAXISPREQUEST value. Do some stylistic changes.
1999-10-17 18:50:47 +00:00
devq = cam_simq_alloc(isp->isp_maxcmds);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
if (devq == NULL) {
return;
}
/*
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
* Construct our SIM entry.
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
*/
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
sim = cam_sim_alloc(isp_action, isp_poll, "isp", isp,
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
device_get_unit(isp->isp_dev), 1, isp->isp_maxcmds, devq);
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
if (sim == NULL) {
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
cam_simq_free(devq);
return;
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
isp->isp_osinfo.ehook.ich_func = isp_intr_enable;
isp->isp_osinfo.ehook.ich_arg = isp;
if (config_intrhook_establish(&isp->isp_osinfo.ehook) != 0) {
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
isp_prt(isp, ISP_LOGERR,
"could not establish interrupt enable hook");
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
cam_sim_free(sim, TRUE);
return;
}
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
if (xpt_bus_register(sim, primary) != CAM_SUCCESS) {
cam_sim_free(sim, TRUE);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
return;
}
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
if (xpt_create_path(&path, NULL, cam_sim_path(sim),
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
return;
}
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
xpt_setup_ccb(&csa.ccb_h, path, 5);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
csa.callback = isp_cam_async;
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
csa.callback_arg = sim;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
xpt_action((union ccb *)&csa);
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
isp->isp_sim = sim;
isp->isp_path = path;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
/*
* If we have a second channel, construct SIM entry for that.
*/
Add Dual LVD bus (1280) support
1999-12-16 05:42:02 +00:00
if (IS_DUALBUS(isp)) {
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
sim = cam_sim_alloc(isp_action, isp_poll, "isp", isp,
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
device_get_unit(isp->isp_dev), 1, isp->isp_maxcmds, devq);
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
if (sim == NULL) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
cam_simq_free(devq);
return;
}
if (xpt_bus_register(sim, secondary) != CAM_SUCCESS) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
cam_sim_free(sim, TRUE);
return;
}
if (xpt_create_path(&path, NULL, cam_sim_path(sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
return;
}
xpt_setup_ccb(&csa.ccb_h, path, 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = isp_cam_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
isp->isp_sim2 = sim;
isp->isp_path2 = path;
}
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
if (isp->isp_role != ISP_ROLE_NONE) {
isp->isp_state = ISP_RUNSTATE;
ENABLE_INTS(isp);
}
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (isplist == NULL) {
isplist = isp;
} else {
struct ispsoftc *tmp = isplist;
while (tmp->isp_osinfo.next) {
tmp = tmp->isp_osinfo.next;
}
tmp->isp_osinfo.next = isp;
}
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
static void
isp_intr_enable(void *arg)
{
struct ispsoftc *isp = arg;
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
if (isp->isp_role != ISP_ROLE_NONE) {
ENABLE_INTS(isp);
isp->isp_osinfo.intsok = 1;
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
/* Release our hook so that the boot can continue. */
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
}
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
/*
* Put the target mode functions here, because some are inlines
*/
#ifdef ISP_TARGET_MODE
static __inline int is_lun_enabled(struct ispsoftc *, lun_id_t);
static __inline int are_any_luns_enabled(struct ispsoftc *);
static __inline tstate_t *get_lun_statep(struct ispsoftc *, lun_id_t);
static __inline void rls_lun_statep(struct ispsoftc *, tstate_t *);
static __inline int isp_psema_sig_rqe(struct ispsoftc *);
static __inline int isp_cv_wait_timed_rqe(struct ispsoftc *, int);
static __inline void isp_cv_signal_rqe(struct ispsoftc *, int);
static __inline void isp_vsema_rqe(struct ispsoftc *);
static cam_status
create_lun_state(struct ispsoftc *, struct cam_path *, tstate_t **);
static void destroy_lun_state(struct ispsoftc *, tstate_t *);
static void isp_en_lun(struct ispsoftc *, union ccb *);
static cam_status isp_abort_tgt_ccb(struct ispsoftc *, union ccb *);
static cam_status isp_target_start_ctio(struct ispsoftc *, union ccb *);
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
static cam_status isp_target_putback_atio(struct ispsoftc *, union ccb *);
static timeout_t isp_refire_putback_atio;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
static int isp_handle_platform_atio(struct ispsoftc *, at_entry_t *);
static int isp_handle_platform_atio2(struct ispsoftc *, at2_entry_t *);
static int isp_handle_platform_ctio(struct ispsoftc *, void *);
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
static void isp_handle_platform_ctio_part2(struct ispsoftc *, union ccb *);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
static __inline int
is_lun_enabled(struct ispsoftc *isp, lun_id_t lun)
{
tstate_t *tptr;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if ((tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(lun)]) == NULL) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (0);
}
do {
if (tptr->lun == (lun_id_t) lun) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (1);
}
} while ((tptr = tptr->next) != NULL);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (0);
}
static __inline int
are_any_luns_enabled(struct ispsoftc *isp)
{
int i;
for (i = 0; i < LUN_HASH_SIZE; i++) {
if (isp->isp_osinfo.lun_hash[i]) {
return (1);
}
}
return (0);
}
static __inline tstate_t *
get_lun_statep(struct ispsoftc *isp, lun_id_t lun)
{
tstate_t *tptr;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (lun == CAM_LUN_WILDCARD) {
tptr = &isp->isp_osinfo.tsdflt;
tptr->hold++;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (tptr);
} else {
tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(lun)];
}
if (tptr == NULL) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (NULL);
}
do {
if (tptr->lun == lun) {
tptr->hold++;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (tptr);
}
} while ((tptr = tptr->next) != NULL);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (tptr);
}
static __inline void
rls_lun_statep(struct ispsoftc *isp, tstate_t *tptr)
{
if (tptr->hold)
tptr->hold--;
}
static __inline int
isp_psema_sig_rqe(struct ispsoftc *isp)
{
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
while (isp->isp_osinfo.tmflags & TM_BUSY) {
isp->isp_osinfo.tmflags |= TM_WANTED;
if (tsleep(&isp->isp_osinfo.tmflags, PRIBIO|PCATCH, "i0", 0)) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (-1);
}
isp->isp_osinfo.tmflags |= TM_BUSY;
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (0);
}
static __inline int
isp_cv_wait_timed_rqe(struct ispsoftc *isp, int timo)
{
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (tsleep(&isp->isp_osinfo.rstatus, PRIBIO, "qt1", timo)) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (-1);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (0);
}
static __inline void
isp_cv_signal_rqe(struct ispsoftc *isp, int status)
{
isp->isp_osinfo.rstatus = status;
wakeup(&isp->isp_osinfo.rstatus);
}
static __inline void
isp_vsema_rqe(struct ispsoftc *isp)
{
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (isp->isp_osinfo.tmflags & TM_WANTED) {
isp->isp_osinfo.tmflags &= ~TM_WANTED;
wakeup(&isp->isp_osinfo.tmflags);
}
isp->isp_osinfo.tmflags &= ~TM_BUSY;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
static cam_status
create_lun_state(struct ispsoftc *isp, struct cam_path *path, tstate_t **rslt)
{
cam_status status;
lun_id_t lun;
tstate_t *tptr, *new;
lun = xpt_path_lun_id(path);
if (lun < 0) {
return (CAM_LUN_INVALID);
}
if (is_lun_enabled(isp, lun)) {
return (CAM_LUN_ALRDY_ENA);
}
More M_ZERO patches. Submitted by: josh@zipperup.org Submitted by: Robert Drehmel <robd@gmx.net> Approved by: mjacob
2000-12-03 20:46:54 +00:00
new = (tstate_t *) malloc(sizeof (tstate_t), M_DEVBUF, M_NOWAIT|M_ZERO);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (new == NULL) {
return (CAM_RESRC_UNAVAIL);
}
status = xpt_create_path(&new->owner, NULL, xpt_path_path_id(path),
xpt_path_target_id(path), xpt_path_lun_id(path));
if (status != CAM_REQ_CMP) {
free(new, M_DEVBUF);
return (status);
}
new->lun = lun;
SLIST_INIT(&new->atios);
SLIST_INIT(&new->inots);
new->hold = 1;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if ((tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(lun)]) == NULL) {
isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(lun)] = new;
} else {
while (tptr->next)
tptr = tptr->next;
tptr->next = new;
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
*rslt = new;
return (CAM_REQ_CMP);
}
static __inline void
destroy_lun_state(struct ispsoftc *isp, tstate_t *tptr)
{
tstate_t *lw, *pw;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (tptr->hold) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
pw = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(tptr->lun)];
if (pw == NULL) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
} else if (pw->lun == tptr->lun) {
isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(tptr->lun)] = pw->next;
} else {
lw = pw;
pw = lw->next;
while (pw) {
if (pw->lun == tptr->lun) {
lw->next = pw->next;
break;
}
lw = pw;
pw = pw->next;
}
if (pw == NULL) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
}
free(tptr, M_DEVBUF);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
static void
isp_en_lun(struct ispsoftc *isp, union ccb *ccb)
{
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
const char lfmt[] = "Lun now %sabled for target mode";
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
struct ccb_en_lun *cel = &ccb->cel;
tstate_t *tptr;
u_int16_t rstat;
various fixes
2000-08-27 23:38:44 +00:00
int bus, frozen = 0;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
lun_id_t lun;
target_id_t tgt;
bus = XS_CHANNEL(ccb);
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
if (bus != 0) {
isp_prt(isp, ISP_LOGERR,
"second channel target mode not supported");
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
tgt = ccb->ccb_h.target_id;
lun = ccb->ccb_h.target_lun;
/*
various fixes
2000-08-27 23:38:44 +00:00
* Do some sanity checking first.
*/
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
if ((lun != CAM_LUN_WILDCARD) &&
(lun < 0 || lun >= (lun_id_t) isp->isp_maxluns)) {
various fixes
2000-08-27 23:38:44 +00:00
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
if (IS_SCSI(isp)) {
if (tgt != CAM_TARGET_WILDCARD &&
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
tgt != SDPARAM(isp)->isp_initiator_id) {
various fixes
2000-08-27 23:38:44 +00:00
ccb->ccb_h.status = CAM_TID_INVALID;
return;
}
} else {
if (tgt != CAM_TARGET_WILDCARD &&
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
tgt != FCPARAM(isp)->isp_iid) {
various fixes
2000-08-27 23:38:44 +00:00
ccb->ccb_h.status = CAM_TID_INVALID;
return;
}
}
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
if (tgt == CAM_TARGET_WILDCARD) {
if (lun != CAM_LUN_WILDCARD) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
}
various fixes
2000-08-27 23:38:44 +00:00
/*
* If Fibre Channel, stop and drain all activity to this bus.
*/
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
#if 0
various fixes
2000-08-27 23:38:44 +00:00
if (IS_FC(isp)) {
ISP_LOCK(isp);
frozen = 1;
xpt_freeze_simq(isp->isp_sim, 1);
isp->isp_osinfo.drain = 1;
while (isp->isp_osinfo.drain) {
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
(void) msleep(&isp->isp_osinfo.drain,
&isp->isp_osinfo.lock, PRIBIO,
"ispdrain", 10 * hz);
various fixes
2000-08-27 23:38:44 +00:00
}
ISP_UNLOCK(isp);
}
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
#endif
various fixes
2000-08-27 23:38:44 +00:00
/*
* Check to see if we're enabling on fibre channel and
* don't yet have a notion of who the heck we are (no
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
* loop yet).
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
*/
if (IS_FC(isp) && cel->enable &&
(isp->isp_osinfo.tmflags & TM_TMODE_ENABLED) == 0) {
fcparam *fcp = isp->isp_param;
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
int rv;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
rv = isp_fc_runstate(isp, 2 * 1000000);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
if (fcp->isp_fwstate != FW_READY ||
fcp->isp_loopstate != LOOP_READY) {
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"could not get a good port database read");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
various fixes
2000-08-27 23:38:44 +00:00
if (frozen)
xpt_release_simq(isp->isp_sim, 1);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
}
/*
* Next check to see whether this is a target/lun wildcard action.
*
* If so, we enable/disable target mode but don't do any lun enabling.
*/
if (lun == CAM_LUN_WILDCARD && tgt == CAM_TARGET_WILDCARD) {
int av;
tptr = &isp->isp_osinfo.tsdflt;
if (cel->enable) {
if (isp->isp_osinfo.tmflags & TM_TMODE_ENABLED) {
ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
various fixes
2000-08-27 23:38:44 +00:00
if (frozen)
xpt_release_simq(isp->isp_sim, 1);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
ccb->ccb_h.status =
xpt_create_path(&tptr->owner, NULL,
xpt_path_path_id(ccb->ccb_h.path),
xpt_path_target_id(ccb->ccb_h.path),
xpt_path_lun_id(ccb->ccb_h.path));
if (ccb->ccb_h.status != CAM_REQ_CMP) {
various fixes
2000-08-27 23:38:44 +00:00
if (frozen)
xpt_release_simq(isp->isp_sim, 1);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
SLIST_INIT(&tptr->atios);
SLIST_INIT(&tptr->inots);
av = 1;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
av = isp_control(isp, ISPCTL_TOGGLE_TMODE, &av);
if (av) {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
xpt_free_path(tptr->owner);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
various fixes
2000-08-27 23:38:44 +00:00
if (frozen)
xpt_release_simq(isp->isp_sim, 1);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
isp->isp_osinfo.tmflags |= TM_TMODE_ENABLED;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
} else {
if ((isp->isp_osinfo.tmflags & TM_TMODE_ENABLED) == 0) {
ccb->ccb_h.status = CAM_LUN_INVALID;
various fixes
2000-08-27 23:38:44 +00:00
if (frozen)
xpt_release_simq(isp->isp_sim, 1);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
if (are_any_luns_enabled(isp)) {
ccb->ccb_h.status = CAM_SCSI_BUSY;
various fixes
2000-08-27 23:38:44 +00:00
if (frozen)
xpt_release_simq(isp->isp_sim, 1);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
av = 0;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
av = isp_control(isp, ISPCTL_TOGGLE_TMODE, &av);
if (av) {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
various fixes
2000-08-27 23:38:44 +00:00
if (frozen)
xpt_release_simq(isp->isp_sim, 1);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
isp->isp_osinfo.tmflags &= ~TM_TMODE_ENABLED;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGINFO, lfmt, (cel->enable) ? "en" : "dis");
various fixes
2000-08-27 23:38:44 +00:00
if (frozen)
xpt_release_simq(isp->isp_sim, 1);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return;
}
/*
various fixes
2000-08-27 23:38:44 +00:00
* We can move along now...
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
*/
various fixes
2000-08-27 23:38:44 +00:00
if (frozen)
xpt_release_simq(isp->isp_sim, 1);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (cel->enable) {
ccb->ccb_h.status =
create_lun_state(isp, ccb->ccb_h.path, &tptr);
if (ccb->ccb_h.status != CAM_REQ_CMP) {
return;
}
} else {
tptr = get_lun_statep(isp, lun);
if (tptr == NULL) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
}
if (isp_psema_sig_rqe(isp)) {
rls_lun_statep(isp, tptr);
if (cel->enable)
destroy_lun_state(isp, tptr);
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (cel->enable) {
u_int32_t seq = isp->isp_osinfo.rollinfo++;
rstat = LUN_ERR;
if (isp_lun_cmd(isp, RQSTYPE_ENABLE_LUN, bus, tgt, lun, seq)) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN, "isp_lun_cmd failed");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
goto out;
}
if (isp_cv_wait_timed_rqe(isp, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGERR,
"wait for ENABLE LUN timed out");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
goto out;
}
rstat = isp->isp_osinfo.rstatus;
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGERR,
"ENABLE LUN returned 0x%x", rstat);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
goto out;
}
} else {
u_int32_t seq;
seq = isp->isp_osinfo.rollinfo++;
rstat = LUN_ERR;
if (isp_lun_cmd(isp, -RQSTYPE_MODIFY_LUN, bus, tgt, lun, seq)) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGERR, "isp_lun_cmd failed");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
goto out;
}
if (isp_cv_wait_timed_rqe(isp, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGERR,
"wait for MODIFY LUN timed out");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
goto out;
}
rstat = isp->isp_osinfo.rstatus;
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGERR,
"MODIFY LUN returned 0x%x", rstat);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
goto out;
}
rstat = LUN_ERR;
seq = isp->isp_osinfo.rollinfo++;
if (isp_lun_cmd(isp, -RQSTYPE_ENABLE_LUN, bus, tgt, lun, seq)) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGERR, "isp_lun_cmd failed");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
goto out;
}
if (isp_cv_wait_timed_rqe(isp, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGERR,
"wait for ENABLE LUN timed out");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
goto out;
}
rstat = isp->isp_osinfo.rstatus;
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"ENABLE LUN returned 0x%x", rstat);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
goto out;
}
}
out:
isp_vsema_rqe(isp);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"lun %sable failed", (cel->enable) ? "en" : "dis");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
rls_lun_statep(isp, tptr);
if (cel->enable)
destroy_lun_state(isp, tptr);
} else {
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGINFO, lfmt, (cel->enable) ? "en" : "dis");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
rls_lun_statep(isp, tptr);
if (cel->enable == 0) {
destroy_lun_state(isp, tptr);
}
ccb->ccb_h.status = CAM_REQ_CMP;
}
}
static cam_status
isp_abort_tgt_ccb(struct ispsoftc *isp, union ccb *ccb)
{
tstate_t *tptr;
struct ccb_hdr_slist *lp;
struct ccb_hdr *curelm;
int found;
union ccb *accb = ccb->cab.abort_ccb;
if (accb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
if (IS_FC(isp) && (accb->ccb_h.target_id !=
((fcparam *) isp->isp_param)->isp_loopid)) {
return (CAM_PATH_INVALID);
} else if (IS_SCSI(isp) && (accb->ccb_h.target_id !=
((sdparam *) isp->isp_param)->isp_initiator_id)) {
return (CAM_PATH_INVALID);
}
}
tptr = get_lun_statep(isp, accb->ccb_h.target_lun);
if (tptr == NULL) {
return (CAM_PATH_INVALID);
}
if (accb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
lp = &tptr->atios;
} else if (accb->ccb_h.func_code == XPT_IMMED_NOTIFY) {
lp = &tptr->inots;
} else {
rls_lun_statep(isp, tptr);
return (CAM_UA_ABORT);
}
curelm = SLIST_FIRST(lp);
found = 0;
if (curelm == &accb->ccb_h) {
found = 1;
SLIST_REMOVE_HEAD(lp, sim_links.sle);
} else {
while(curelm != NULL) {
struct ccb_hdr *nextelm;
nextelm = SLIST_NEXT(curelm, sim_links.sle);
if (nextelm == &accb->ccb_h) {
found = 1;
SLIST_NEXT(curelm, sim_links.sle) =
SLIST_NEXT(nextelm, sim_links.sle);
break;
}
curelm = nextelm;
}
}
rls_lun_statep(isp, tptr);
if (found) {
accb->ccb_h.status = CAM_REQ_ABORTED;
return (CAM_REQ_CMP);
}
return(CAM_PATH_INVALID);
}
static cam_status
isp_target_start_ctio(struct ispsoftc *isp, union ccb *ccb)
{
void *qe;
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
struct ccb_scsiio *cso = &ccb->csio;
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
u_int16_t *hp, save_handle;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
u_int16_t iptr, optr;
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (isp_getrqentry(isp, &iptr, &optr, &qe)) {
Clean up some debug printing. Find the correct lun when SCCLUN is defined. If we complete with a check condition but no sense data, say we had an AUTOSENSE failure.
2000-01-04 03:45:49 +00:00
xpt_print_path(ccb->ccb_h.path);
printf("Request Queue Overflow in isp_target_start_ctio\n");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (CAM_RESRC_UNAVAIL);
}
Clean up some debug printing. Find the correct lun when SCCLUN is defined. If we complete with a check condition but no sense data, say we had an AUTOSENSE failure.
2000-01-04 03:45:49 +00:00
bzero(qe, QENTRY_LEN);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
/*
* We're either moving data or completing a command here.
*/
if (IS_FC(isp)) {
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
struct ccb_accept_tio *atiop;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
ct2_entry_t *cto = qe;
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
cto->ct_header.rqs_entry_count = 1;
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
cto->ct_iid = cso->init_id;
Remove all ISP2100_SCCLUN define protected code and replace it with runtime checks.
2000-06-18 04:50:26 +00:00
if (isp->isp_maxluns <= 16) {
cto->ct_lun = ccb->ccb_h.target_lun;
}
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
/*
* Start with a residual based on what the original datalength
* was supposed to be. Basically, we ignore what CAM has set
* for residuals. The data transfer routines will knock off
* the residual for each byte actually moved- and also will
* be responsible for setting the underrun flag.
*/
/* HACK! HACK! */
if ((atiop = ccb->ccb_h.periph_priv.entries[1].ptr) != NULL) {
cto->ct_resid = atiop->ccb_h.spriv_field0;
}
/*
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
* We always have to use the tag_id- it has the responder
* exchange id in it.
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
*/
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
cto->ct_rxid = cso->tag_id;
if (cso->dxfer_len == 0) {
cto->ct_flags |= CT2_FLAG_MODE1 | CT2_NO_DATA;
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
if (ccb->ccb_h.flags & CAM_SEND_STATUS) {
cto->ct_flags |= CT2_SENDSTATUS;
cto->rsp.m1.ct_scsi_status = cso->scsi_status;
}
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
if ((ccb->ccb_h.flags & CAM_SEND_SENSE) != 0) {
int m = min(cso->sense_len, MAXRESPLEN);
bcopy(&cso->sense_data, cto->rsp.m1.ct_resp, m);
cto->rsp.m1.ct_senselen = m;
cto->rsp.m1.ct_scsi_status |= CT2_SNSLEN_VALID;
}
} else {
cto->ct_flags |= CT2_FLAG_MODE0;
if ((cso->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
cto->ct_flags |= CT2_DATA_IN;
} else {
cto->ct_flags |= CT2_DATA_OUT;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
cto->ct_flags |= CT2_SENDSTATUS;
cto->rsp.m0.ct_scsi_status = cso->scsi_status;
Clean up some debug printing. Find the correct lun when SCCLUN is defined. If we complete with a check condition but no sense data, say we had an AUTOSENSE failure.
2000-01-04 03:45:49 +00:00
}
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
/*
* If we're sending data and status back together,
* we can't also send back sense data as well.
*/
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
ccb->ccb_h.flags &= ~CAM_SEND_SENSE;
}
Check CT2_SENDSTATUS/CT_SENDSTATUS against cto->ct_flags, not CAM_SEND_STATUS. Set a timeout of 2 seconds per CTIO. Make sure that the 'real' tag value is being checked against- not the one that also carries the firmware handle.
2001-03-21 00:46:44 +00:00
if (cto->ct_flags & CT2_SENDSTATUS) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGTDEBUG2,
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
"CTIO2[%x] SCSI STATUS 0x%x datalength %u",
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
cto->ct_rxid, cso->scsi_status, cto->ct_resid);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
Check CT2_SENDSTATUS/CT_SENDSTATUS against cto->ct_flags, not CAM_SEND_STATUS. Set a timeout of 2 seconds per CTIO. Make sure that the 'real' tag value is being checked against- not the one that also carries the firmware handle.
2001-03-21 00:46:44 +00:00
cto->ct_timeout = 2;
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
hp = &cto->ct_syshandle;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
} else {
ct_entry_t *cto = qe;
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
/*
* We always have to use the tag_id- it has the handle
* for this command.
*/
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
cto->ct_header.rqs_entry_count = 1;
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
cto->ct_iid = cso->init_id;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
cto->ct_tgt = ccb->ccb_h.target_id;
cto->ct_lun = ccb->ccb_h.target_lun;
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
cto->ct_fwhandle = cso->tag_id >> 8;
Check CT2_SENDSTATUS/CT_SENDSTATUS against cto->ct_flags, not CAM_SEND_STATUS. Set a timeout of 2 seconds per CTIO. Make sure that the 'real' tag value is being checked against- not the one that also carries the firmware handle.
2001-03-21 00:46:44 +00:00
cto->ct_tag_val = cso->tag_id & 0xff;
if (cto->ct_tag_val && cso->tag_action) {
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
/*
Check CT2_SENDSTATUS/CT_SENDSTATUS against cto->ct_flags, not CAM_SEND_STATUS. Set a timeout of 2 seconds per CTIO. Make sure that the 'real' tag value is being checked against- not the one that also carries the firmware handle.
2001-03-21 00:46:44 +00:00
* We don't specify a tag type for regular SCSI,
* just the tag value and set a flag.
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
*/
cto->ct_flags |= CT_TQAE;
}
if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) {
cto->ct_flags |= CT_NODISC;
}
if (cso->dxfer_len == 0) {
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
cto->ct_flags |= CT_NO_DATA;
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
} else if ((cso->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
cto->ct_flags |= CT_DATA_IN;
} else {
cto->ct_flags |= CT_DATA_OUT;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
if (ccb->ccb_h.flags & CAM_SEND_STATUS) {
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
cto->ct_flags |= CT_SENDSTATUS;
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
cto->ct_scsi_status = cso->scsi_status;
cto->ct_resid = cso->resid;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
Check CT2_SENDSTATUS/CT_SENDSTATUS against cto->ct_flags, not CAM_SEND_STATUS. Set a timeout of 2 seconds per CTIO. Make sure that the 'real' tag value is being checked against- not the one that also carries the firmware handle.
2001-03-21 00:46:44 +00:00
if (cto->ct_flags & CT_SENDSTATUS) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGTDEBUG2,
"CTIO SCSI STATUS 0x%x resid %d",
cso->scsi_status, cso->resid);
Clean up some debug printing. Find the correct lun when SCCLUN is defined. If we complete with a check condition but no sense data, say we had an AUTOSENSE failure.
2000-01-04 03:45:49 +00:00
}
Check CT2_SENDSTATUS/CT_SENDSTATUS against cto->ct_flags, not CAM_SEND_STATUS. Set a timeout of 2 seconds per CTIO. Make sure that the 'real' tag value is being checked against- not the one that also carries the firmware handle.
2001-03-21 00:46:44 +00:00
cto->ct_timeout = 2;
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
hp = &cto->ct_syshandle;
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
ccb->ccb_h.flags &= ~CAM_SEND_SENSE;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
if (isp_save_xs(isp, (XS_T *)ccb, hp)) {
Clean up some debug printing. Find the correct lun when SCCLUN is defined. If we complete with a check condition but no sense data, say we had an AUTOSENSE failure.
2000-01-04 03:45:49 +00:00
xpt_print_path(ccb->ccb_h.path);
printf("No XFLIST pointers for isp_target_start_ctio\n");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
return (CAM_RESRC_UNAVAIL);
}
/*
* Call the dma setup routines for this entry (and any subsequent
* CTIOs) if there's data to move, and then tell the f/w it's got
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
* new things to play with. As with isp_start's usage of DMA setup,
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
* any swizzling is done in the machine dependent layer. Because
* of this, we put the request onto the queue area first in native
* format.
*/
save_handle = *hp;
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
switch (ISP_DMASETUP(isp, cso, qe, &iptr, optr)) {
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
case CMD_QUEUED:
ISP_ADD_REQUEST(isp, iptr);
return (CAM_REQ_INPROG);
case CMD_EAGAIN:
ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
isp_destroy_handle(isp, save_handle);
return (CAM_RESRC_UNAVAIL);
default:
isp_destroy_handle(isp, save_handle);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
return (XS_ERR(ccb));
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
}
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
static cam_status
isp_target_putback_atio(struct ispsoftc *isp, union ccb *ccb)
{
void *qe;
struct ccb_accept_tio *atiop;
u_int16_t iptr, optr;
if (isp_getrqentry(isp, &iptr, &optr, &qe)) {
xpt_print_path(ccb->ccb_h.path);
printf("Request Queue Overflow in isp_target_putback_atio\n");
return (CAM_RESRC_UNAVAIL);
}
bzero(qe, QENTRY_LEN);
atiop = (struct ccb_accept_tio *) ccb;
if (IS_FC(isp)) {
at2_entry_t *at = qe;
at->at_header.rqs_entry_type = RQSTYPE_ATIO2;
at->at_header.rqs_entry_count = 1;
if (isp->isp_maxluns > 16) {
at->at_scclun = (uint16_t) atiop->ccb_h.target_lun;
} else {
at->at_lun = (uint8_t) atiop->ccb_h.target_lun;
}
at->at_status = CT_OK;
at->at_rxid = atiop->tag_id;
ISP_SWIZ_ATIO2(isp, qe, qe);
} else {
at_entry_t *at = qe;
at->at_header.rqs_entry_type = RQSTYPE_ATIO;
at->at_header.rqs_entry_count = 1;
at->at_iid = atiop->init_id;
at->at_tgt = atiop->ccb_h.target_id;
at->at_lun = atiop->ccb_h.target_lun;
at->at_status = CT_OK;
if (atiop->ccb_h.status & CAM_TAG_ACTION_VALID) {
at->at_tag_type = atiop->tag_action;
}
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
at->at_tag_val = atiop->tag_id & 0xff;
at->at_handle = atiop->tag_id >> 8;
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
ISP_SWIZ_ATIO(isp, qe, qe);
}
ISP_TDQE(isp, "isp_target_putback_atio", (int) optr, qe);
ISP_ADD_REQUEST(isp, iptr);
return (CAM_REQ_CMP);
}
static void
isp_refire_putback_atio(void *arg)
{
union ccb *ccb = arg;
int s = splcam();
if (isp_target_putback_atio(XS_ISP(ccb), ccb) != CAM_REQ_CMP) {
(void) timeout(isp_refire_putback_atio, ccb, 10);
} else {
isp_handle_platform_ctio_part2(XS_ISP(ccb), ccb);
}
splx(s);
}
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
/*
* Handle ATIO stuff that the generic code can't.
* This means handling CDBs.
*/
static int
isp_handle_platform_atio(struct ispsoftc *isp, at_entry_t *aep)
{
tstate_t *tptr;
int status;
struct ccb_accept_tio *atiop;
/*
* The firmware status (except for the QLTM_SVALID bit)
* indicates why this ATIO was sent to us.
*
* If QLTM_SVALID is set, the firware has recommended Sense Data.
*
* If the DISCONNECTS DISABLED bit is set in the flags field,
* we're still connected on the SCSI bus - i.e. the initiator
* did not set DiscPriv in the identify message. We don't care
* about this so it's ignored.
*/
status = aep->at_status;
if ((status & ~QLTM_SVALID) == AT_PHASE_ERROR) {
/*
* Bus Phase Sequence error. We should have sense data
* suggested by the f/w. I'm not sure quite yet what
* to do about this for CAM.
*/
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN, "PHASE ERROR");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
if ((status & ~QLTM_SVALID) != AT_CDB) {
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp,
ISP_LOGWARN, "bogus atio (0x%x) leaked to platform",
status);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
tptr = get_lun_statep(isp, aep->at_lun);
if (tptr == NULL) {
tptr = get_lun_statep(isp, CAM_LUN_WILDCARD);
}
if (tptr == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a BUSY status
* instead. This works out okay because the only
* time we should, in fact, get this, is in the
* case that somebody configured us without the
* blackhole driver, so they get what they deserve.
*/
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
atiop = (struct ccb_accept_tio *) SLIST_FIRST(&tptr->atios);
if (atiop == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a QUEUE FULL status
* instead. This works out okay because the only time we
* should, in fact, get this, is in the case that we've
* run out of ATIOS.
*/
xpt_print_path(tptr->owner);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"no ATIOS for lun %d from initiator %d",
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
aep->at_lun, aep->at_iid);
rls_lun_statep(isp, tptr);
if (aep->at_flags & AT_TQAE)
isp_endcmd(isp, aep, SCSI_STATUS_QUEUE_FULL, 0);
else
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
SLIST_REMOVE_HEAD(&tptr->atios, sim_links.sle);
if (tptr == &isp->isp_osinfo.tsdflt) {
atiop->ccb_h.target_id = aep->at_tgt;
atiop->ccb_h.target_lun = aep->at_lun;
}
if (aep->at_flags & AT_NODISC) {
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
atiop->ccb_h.flags = CAM_DIS_DISCONNECT;
} else {
atiop->ccb_h.flags = 0;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
if (status & QLTM_SVALID) {
size_t amt = imin(QLTM_SENSELEN, sizeof (atiop->sense_data));
atiop->sense_len = amt;
MEMCPY(&atiop->sense_data, aep->at_sense, amt);
} else {
atiop->sense_len = 0;
}
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
atiop->init_id = aep->at_iid;
atiop->cdb_len = aep->at_cdblen;
MEMCPY(atiop->cdb_io.cdb_bytes, aep->at_cdb, aep->at_cdblen);
atiop->ccb_h.status = CAM_CDB_RECVD;
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
atiop->tag_id = aep->at_tag_val | (aep->at_handle << 8);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if ((atiop->tag_action = aep->at_tag_type) != 0) {
atiop->ccb_h.status |= CAM_TAG_ACTION_VALID;
}
xpt_done((union ccb*)atiop);
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGTDEBUG2,
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
"ATIO[%x] CDB=0x%x iid%d->lun%d tag 0x%x ttype 0x%x %s",
aep->at_handle, aep->at_cdb[0] & 0xff, aep->at_iid, aep->at_lun,
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
aep->at_tag_val & 0xff, aep->at_tag_type,
(aep->at_flags & AT_NODISC)? "nondisc" : "disconnecting");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
rls_lun_statep(isp, tptr);
return (0);
}
static int
isp_handle_platform_atio2(struct ispsoftc *isp, at2_entry_t *aep)
{
Clean up some debug printing. Find the correct lun when SCCLUN is defined. If we complete with a check condition but no sense data, say we had an AUTOSENSE failure.
2000-01-04 03:45:49 +00:00
lun_id_t lun;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
tstate_t *tptr;
struct ccb_accept_tio *atiop;
/*
* The firmware status (except for the QLTM_SVALID bit)
* indicates why this ATIO was sent to us.
*
* If QLTM_SVALID is set, the firware has recommended Sense Data.
*/
if ((aep->at_status & ~QLTM_SVALID) != AT_CDB) {
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"bogus atio (0x%x) leaked to platform", aep->at_status);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
Remove all ISP2100_SCCLUN define protected code and replace it with runtime checks.
2000-06-18 04:50:26 +00:00
if (isp->isp_maxluns > 16) {
lun = aep->at_scclun;
} else {
lun = aep->at_lun;
}
Clean up some debug printing. Find the correct lun when SCCLUN is defined. If we complete with a check condition but no sense data, say we had an AUTOSENSE failure.
2000-01-04 03:45:49 +00:00
tptr = get_lun_statep(isp, lun);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (tptr == NULL) {
tptr = get_lun_statep(isp, CAM_LUN_WILDCARD);
}
if (tptr == NULL) {
Fix breakage to target mode support. What we'd like to know is whether or not we have a listener upstream that really hasn't configured yet. If we do, then we can give a more sensible reply here. If not, then we can reject this out of hand. Choices for what to send were Not Ready, Unit Not Self-Configured Yet (0x2,0x3e,0x00) for the former and Illegal Request, Logical Unit Not Supported (0x5,0x25,0x00) for the latter. We used to decide whether there was at least one listener based upon whether the black hole driver was configured. However, recent config(8) changes have made this hard to do at this time. Actually, we didn't use the above quite yet, but were sure considering it.
2000-06-12 23:08:31 +00:00
/*
* What we'd like to know is whether or not we have a listener
* upstream that really hasn't configured yet. If we do, then
* we can give a more sensible reply here. If not, then we can
* reject this out of hand.
*
* Choices for what to send were
*
* Not Ready, Unit Not Self-Configured Yet
* (0x2,0x3e,0x00)
*
* for the former and
*
* Illegal Request, Logical Unit Not Supported
* (0x5,0x25,0x00)
*
* for the latter.
*
* We used to decide whether there was at least one listener
* based upon whether the black hole driver was configured.
* However, recent config(8) changes have made this hard to do
* at this time.
*
*/
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
u_int32_t ccode = SCSI_STATUS_BUSY;
Fix breakage to target mode support. What we'd like to know is whether or not we have a listener upstream that really hasn't configured yet. If we do, then we can give a more sensible reply here. If not, then we can reject this out of hand. Choices for what to send were Not Ready, Unit Not Self-Configured Yet (0x2,0x3e,0x00) for the former and Illegal Request, Logical Unit Not Supported (0x5,0x25,0x00) for the latter. We used to decide whether there was at least one listener based upon whether the black hole driver was configured. However, recent config(8) changes have made this hard to do at this time. Actually, we didn't use the above quite yet, but were sure considering it.
2000-06-12 23:08:31 +00:00
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a BUSY status
* instead. This works out okay because the only
* time we should, in fact, get this, is in the
* case that somebody configured us without the
* blackhole driver, so they get what they deserve.
*/
isp_endcmd(isp, aep, ccode, 0);
return (0);
}
atiop = (struct ccb_accept_tio *) SLIST_FIRST(&tptr->atios);
if (atiop == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a QUEUE FULL status
* instead. This works out okay because the only time we
* should, in fact, get this, is in the case that we've
* run out of ATIOS.
*/
xpt_print_path(tptr->owner);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"no ATIOS for lun %d from initiator %d", lun, aep->at_iid);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
rls_lun_statep(isp, tptr);
if (aep->at_flags & AT_TQAE)
isp_endcmd(isp, aep, SCSI_STATUS_QUEUE_FULL, 0);
else
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
SLIST_REMOVE_HEAD(&tptr->atios, sim_links.sle);
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (tptr == &isp->isp_osinfo.tsdflt) {
atiop->ccb_h.target_id =
((fcparam *)isp->isp_param)->isp_loopid;
Clean up some debug printing. Find the correct lun when SCCLUN is defined. If we complete with a check condition but no sense data, say we had an AUTOSENSE failure.
2000-01-04 03:45:49 +00:00
atiop->ccb_h.target_lun = lun;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
Fix at2_entry_t to reflect what the firmware actually writes (instead of just deriving from SCSI at_entry_t). In this case, there is no 'suggested sense' for FC cards.
2001-02-27 00:14:39 +00:00
/*
* We don't get 'suggested' sense data as we do with SCSI cards.
*/
atiop->sense_len = 0;
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
atiop->init_id = aep->at_iid;
atiop->cdb_len = ATIO2_CDBLEN;
MEMCPY(atiop->cdb_io.cdb_bytes, aep->at_cdb, ATIO2_CDBLEN);
atiop->ccb_h.status = CAM_CDB_RECVD;
atiop->tag_id = aep->at_rxid;
switch (aep->at_taskflags & ATIO2_TC_ATTR_MASK) {
case ATIO2_TC_ATTR_SIMPLEQ:
atiop->tag_action = MSG_SIMPLE_Q_TAG;
break;
case ATIO2_TC_ATTR_HEADOFQ:
atiop->tag_action = MSG_HEAD_OF_Q_TAG;
break;
case ATIO2_TC_ATTR_ORDERED:
atiop->tag_action = MSG_ORDERED_Q_TAG;
break;
case ATIO2_TC_ATTR_ACAQ: /* ?? */
case ATIO2_TC_ATTR_UNTAGGED:
default:
atiop->tag_action = 0;
break;
}
if (atiop->tag_action != 0) {
atiop->ccb_h.status |= CAM_TAG_ACTION_VALID;
}
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
/*
* Preserve overall command datalength in private field.
*/
atiop->ccb_h.spriv_field0 = aep->at_datalen;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
xpt_done((union ccb*)atiop);
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGTDEBUG2,
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
"ATIO2[%x] CDB=0x%x iid%d->lun%d tattr 0x%x datalen %u",
aep->at_rxid, aep->at_cdb[0] & 0xff, aep->at_iid,
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
lun, aep->at_taskflags, aep->at_datalen);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
rls_lun_statep(isp, tptr);
return (0);
}
static int
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
isp_handle_platform_ctio(struct ispsoftc *isp, void *arg)
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
{
union ccb *ccb;
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
int sentstatus, ok, notify_cam;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
/*
* CTIO and CTIO2 are close enough....
*/
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
ccb = (union ccb *) isp_find_xs(isp, ((ct_entry_t *)arg)->ct_syshandle);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
KASSERT((ccb != NULL), ("null ccb in isp_handle_platform_ctio"));
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
isp_destroy_handle(isp, ((ct_entry_t *)arg)->ct_syshandle);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (IS_FC(isp)) {
ct2_entry_t *ct = arg;
sentstatus = ct->ct_flags & CT2_SENDSTATUS;
ok = (ct->ct_status & ~QLTM_SVALID) == CT_OK;
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
if (ok && (ccb->ccb_h.flags & CAM_SEND_SENSE)) {
a whale of a lot of target mode cleanup
2000-01-15 01:50:48 +00:00
ccb->ccb_h.status |= CAM_SENT_SENSE;
}
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGTDEBUG2,
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
"CTIO2[%x] sts 0x%x flg 0x%x sns %d FIN",
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
ct->ct_rxid, ct->ct_status, ct->ct_flags,
(ccb->ccb_h.status & CAM_SENT_SENSE) != 0);
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
notify_cam = ct->ct_header.rqs_seqno;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
} else {
ct_entry_t *ct = arg;
sentstatus = ct->ct_flags & CT_SENDSTATUS;
ok = (ct->ct_status & ~QLTM_SVALID) == CT_OK;
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGTDEBUG2,
"CTIO tag 0x%x sts 0x%x flg 0x%x FIN",
ct->ct_tag_val, ct->ct_status, ct->ct_flags);
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
notify_cam = ct->ct_header.rqs_seqno;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
/*
* We're here either because data transfers are done (and
* it's time to send a final status CTIO) or because the final
* status CTIO is done. We don't get called for all intermediate
* CTIOs that happen for a large data transfer.
*
* In any case, for this platform, the upper layers figure out
* what to do next, so all we do here is collect status and
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
* pass information along. The exception is that we clear
* the notion of handling a non-disconnecting command here.
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
*/
if (sentstatus) {
/*
* Data transfer done. See if all went okay.
*/
if (ok) {
ccb->csio.resid = 0;
} else {
ccb->csio.resid = ccb->csio.dxfer_len;
}
}
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
if (notify_cam == 0) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGTDEBUG1, "Intermediate CTIO done");
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
return (0);
}
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGTDEBUG1, "Final CTIO done");
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
if (isp_target_putback_atio(isp, ccb) != CAM_REQ_CMP) {
(void) timeout(isp_refire_putback_atio, ccb, 10);
} else {
isp_handle_platform_ctio_part2(isp, ccb);
}
return (0);
}
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
static void
isp_handle_platform_ctio_part2(struct ispsoftc *isp, union ccb *ccb)
{
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
ccb->ccb_h.status |= CAM_REQ_CMP;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_RESOURCE) {
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_RESOURCE;
if (isp->isp_osinfo.simqfrozen == 0) {
if ((ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2, "ctio->relsimq");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
} else {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2, "ctio->devqfrozen");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
} else {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"ctio->simqfrozen(%x)", isp->isp_osinfo.simqfrozen);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
}
xpt_done(ccb);
}
#endif
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
static void
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
isp_cam_async(void *cbarg, u_int32_t code, struct cam_path *path, void *arg)
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
{
struct cam_sim *sim;
struct ispsoftc *isp;
sim = (struct cam_sim *)cbarg;
isp = (struct ispsoftc *) cam_sim_softc(sim);
switch (code) {
case AC_LOST_DEVICE:
Add in isp_debug variable. It defaults to zero unless CAMDEBUG is defined where it defaults to one. Change simq width allocation to the max number of commands supported by the HBA after f/w fires up- not the constant MAXISPREQUEST value. Do some stylistic changes.
1999-10-17 18:50:47 +00:00
if (IS_SCSI(isp)) {
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
u_int16_t oflags, nflags;
sdparam *sdp = isp->isp_param;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
int rvf, tgt;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
Clean up lun width determination based upon f/w revisions for the parallel SCSI cards (4.55..4.65 :: 8.55..8.65).
1999-12-20 01:35:04 +00:00
tgt = xpt_path_target_id(path);
rvf = ISP_FW_REVX(isp->isp_fwrev);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
sdp += cam_sim_bus(sim);
isp->isp_update |= (1 << cam_sim_bus(sim));
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
nflags = DPARM_SAFE_DFLT;
Clean up lun width determination based upon f/w revisions for the parallel SCSI cards (4.55..4.65 :: 8.55..8.65).
1999-12-20 01:35:04 +00:00
if (rvf >= ISP_FW_REV(7, 55, 0) ||
(ISP_FW_REV(4, 55, 0) <= rvf &&
(rvf < ISP_FW_REV(5, 0, 0)))) {
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
nflags |= DPARM_NARROW | DPARM_ASYNC;
}
oflags = sdp->isp_devparam[tgt].dev_flags;
sdp->isp_devparam[tgt].dev_flags = nflags;
sdp->isp_devparam[tgt].dev_update = 1;
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS, NULL);
sdp->isp_devparam[tgt].dev_flags = oflags;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
break;
default:
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN, "isp_cam_async: Code 0x%x", code);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
break;
}
}
static void
clarify headers;move uninit to outer layer;remove watchdog
1998-12-28 19:22:27 +00:00
isp_poll(struct cam_sim *sim)
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
{
Make sure we do locking if we call isp_intr. Make sure we enter Giant for now if we call into cam for completion.
2000-12-29 19:06:32 +00:00
struct ispsoftc *isp = cam_sim_softc(sim);
ISP_LOCK(isp);
(void) isp_intr(isp);
ISP_UNLOCK(isp);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
static void
isp_relsim(void *arg)
{
struct ispsoftc *isp = arg;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_TIMED) {
int wasfrozen = isp->isp_osinfo.simqfrozen & SIMQFRZ_TIMED;
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_TIMED;
if (wasfrozen && isp->isp_osinfo.simqfrozen == 0) {
xpt_release_simq(isp->isp_sim, 1);
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2, "timed relsimq");
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
}
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
}
Add in isp_debug variable. It defaults to zero unless CAMDEBUG is defined where it defaults to one. Change simq width allocation to the max number of commands supported by the HBA after f/w fires up- not the constant MAXISPREQUEST value. Do some stylistic changes.
1999-10-17 18:50:47 +00:00
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
static void
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
isp_watchdog(void *arg)
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
{
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
XS_T *xs = arg;
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
struct ispsoftc *isp = XS_ISP(xs);
u_int32_t handle;
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
/*
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
* We've decided this command is dead. Make sure we're not trying
* to kill a command that's already dead by getting it's handle and
* and seeing whether it's still alive.
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
*/
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
handle = isp_find_handle(isp, xs);
if (handle) {
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
u_int16_t r;
if (XS_CMD_DONE_P(xs)) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG1,
"watchdog found done cmd (handle 0x%x)", handle);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
return;
}
if (XS_CMD_WDOG_P(xs)) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"recursive watchdog (handle 0x%x)", handle);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
return;
}
XS_CMD_S_WDOG(xs);
r = ISP_READ(isp, BIU_ISR);
if (INT_PENDING(isp, r) && isp_intr(isp) && XS_CMD_DONE_P(xs)) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"watchdog cleanup (%x, %x)", handle, r);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
xpt_done((union ccb *) xs);
} else if (XS_CMD_GRACE_P(xs)) {
Oops! If we're deciding a command is now really dead, make *darned* sure that it really is by issuing a ISPCTL_ABORT_CMD just on the off chance the f/w will start it up again and, ha ha, start using the DMA resources we gave it but are now taking away.
2000-07-05 06:44:17 +00:00
/*
* Make sure the command is *really* dead before we
* release the handle (and DMA resources) for reuse.
*/
(void) isp_control(isp, ISPCTL_ABORT_CMD, arg);
/*
* After this point, the comamnd is really dead.
*/
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
if (XS_XFRLEN(xs)) {
ISP_DMAFREE(isp, xs, handle);
}
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
isp_destroy_handle(isp, handle);
xpt_print_path(xs->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"watchdog timeout (%x, %x)", handle, r);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
XS_SETERR(xs, CAM_CMD_TIMEOUT);
XS_CMD_C_WDOG(xs);
isp_done(xs);
} else {
u_int16_t iptr, optr;
ispreq_t *mp;
XS_CMD_C_WDOG(xs);
xs->ccb_h.timeout_ch = timeout(isp_watchdog, xs, hz);
if (isp_getrqentry(isp, &iptr, &optr, (void **) &mp)) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
return;
}
XS_CMD_S_GRACE(xs);
MEMZERO((void *) mp, sizeof (*mp));
mp->req_header.rqs_entry_count = 1;
mp->req_header.rqs_entry_type = RQSTYPE_MARKER;
mp->req_modifier = SYNC_ALL;
mp->req_target = XS_CHANNEL(xs) << 7;
ISP_SWIZZLE_REQUEST(isp, mp);
ISP_ADD_REQUEST(isp, iptr);
}
} else {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2, "watchdog with no command");
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
}
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
static void
clarify headers;move uninit to outer layer;remove watchdog
1998-12-28 19:22:27 +00:00
isp_action(struct cam_sim *sim, union ccb *ccb)
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
{
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
int bus, tgt, error;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
struct ispsoftc *isp;
-Wunused cleanup. Submitted by: Poul-Henning Kamp <phk@freebsd.org>
1998-10-15 23:46:33 +00:00
struct ccb_trans_settings *cts;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("isp_action\n"));
isp = (struct ispsoftc *)cam_sim_softc(sim);
ccb->ccb_h.sim_priv.entries[0].field = 0;
ccb->ccb_h.sim_priv.entries[1].ptr = isp;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
if (isp->isp_state != ISP_RUNSTATE &&
ccb->ccb_h.func_code == XPT_SCSI_IO) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
isp_init(isp);
if (isp->isp_state != ISP_INITSTATE) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
/*
* Lie. Say it was a selection timeout.
*/
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
ccb->ccb_h.status = CAM_SEL_TIMEOUT | CAM_DEV_QFRZN;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
xpt_freeze_devq(ccb->ccb_h.path, 1);
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
xpt_done(ccb);
return;
}
isp->isp_state = ISP_RUNSTATE;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
}
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2, "isp_action code %x", ccb->ccb_h.func_code);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO: /* Execute the requested I/O operation */
/*
* Do a couple of preliminary checks...
*/
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
if ((ccb->ccb_h.flags & CAM_CDB_PHYS) != 0) {
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
#ifdef DIAGNOSTIC
if (ccb->ccb_h.target_id > (ISP_MAX_TARGETS(isp) - 1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
} else if (ccb->ccb_h.target_lun > (ISP_MAX_LUNS(isp) - 1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
if (ccb->ccb_h.status == CAM_PATH_INVALID) {
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
isp_prt(isp, ISP_LOGERR,
"invalid tgt/lun (%d.%d) in XPT_SCSI_IO",
ccb->ccb_h.target_id, ccb->ccb_h.target_lun);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
xpt_done(ccb);
break;
}
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
#endif
((struct ccb_scsiio *) ccb)->scsi_status = SCSI_STATUS_OK;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
error = isp_start((XS_T *) ccb);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
switch (error) {
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
case CMD_QUEUED:
ccb->ccb_h.status |= CAM_SIM_QUEUED;
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
Guard against overflow of the calculated timeout value.
2001-01-16 07:15:36 +00:00
u_int64_t ticks = (u_int64_t) hz;
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT)
Guard against overflow of the calculated timeout value.
2001-01-16 07:15:36 +00:00
ticks = 60 * 1000 * ticks;
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
else
ticks = ccb->ccb_h.timeout * hz;
ticks = ((ticks + 999) / 1000) + hz + hz;
Guard against overflow of the calculated timeout value.
2001-01-16 07:15:36 +00:00
if (ticks >= 0x80000000) {
isp_prt(isp, ISP_LOGERR,
"timeout overflow");
ticks = 0x80000000;
}
ccb->ccb_h.timeout_ch = timeout(isp_watchdog,
(caddr_t)ccb, (int)ticks);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
} else {
callout_handle_init(&ccb->ccb_h.timeout_ch);
Add in a watchdog routine to catch cases where we've dropped the command. Apparently the f/w has finished the command, but somehow an interrupt is being lost. So, we just plain wedge when booting alphas. This is a general routine we've needed for a while.
2000-05-09 01:08:21 +00:00
}
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
break;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
case CMD_RQLATER:
if (isp->isp_osinfo.simqfrozen == 0) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"RQLATER freeze simq");
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
isp->isp_osinfo.simqfrozen |= SIMQFRZ_TIMED;
timeout(isp_relsim, isp, 500);
Fix the (unported) resource shortage case- I'd done a xpt_freeze_simq but had never done a CAM_RELEASE_SIMQ to restart the queues.
1998-09-16 19:52:22 +00:00
xpt_freeze_simq(sim, 1);
}
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
XS_SETERR(ccb, CAM_REQUEUE_REQ);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
xpt_done(ccb);
break;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
case CMD_EAGAIN:
if (isp->isp_osinfo.simqfrozen == 0) {
xpt_freeze_simq(sim, 1);
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"EAGAIN freeze simq");
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
isp->isp_osinfo.simqfrozen |= SIMQFRZ_RESOURCE;
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
XS_SETERR(ccb, CAM_REQUEUE_REQ);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
xpt_done(ccb);
break;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
case CMD_COMPLETE:
Make sure we do locking if we call isp_intr. Make sure we enter Giant for now if we call into cam for completion.
2000-12-29 19:06:32 +00:00
ISP_LOCK(isp);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
isp_done((struct ccb_scsiio *) ccb);
Make sure we do locking if we call isp_intr. Make sure we enter Giant for now if we call into cam for completion.
2000-12-29 19:06:32 +00:00
ISP_UNLOCK(isp);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
break;
default:
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
isp_prt(isp, ISP_LOGERR,
"What's this? 0x%x at %d in file %s",
Fix problems with incomplete conversions from printf to isp_prt.
2000-12-31 20:50:56 +00:00
error, __LINE__, __FILE__);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
XS_SETERR(ccb, CAM_REQ_CMP_ERR);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
xpt_done(ccb);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
break;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
#ifdef ISP_TARGET_MODE
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
case XPT_EN_LUN: /* Enable LUN as a target */
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
isp_en_lun(isp, ccb);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
xpt_done(ccb);
break;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
case XPT_NOTIFY_ACK: /* recycle notify ack */
case XPT_IMMED_NOTIFY: /* Add Immediate Notify Resource */
case XPT_ACCEPT_TARGET_IO: /* Add Accept Target IO Resource */
{
tstate_t *tptr = get_lun_statep(isp, ccb->ccb_h.target_lun);
if (tptr == NULL) {
ccb->ccb_h.status = CAM_LUN_INVALID;
xpt_done(ccb);
break;
}
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
ccb->ccb_h.sim_priv.entries[0].field = 0;
ccb->ccb_h.sim_priv.entries[1].ptr = isp;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
Add a isp_target_putback_atio- we aren't using CCINCR at this time, so we need a function that tells the Qlogic f/w that a target mode command is done, so increase the resource count for that lun. Add in a timeout function to kick the putback again if we fail to do it the first time (we may not have the request queue space for ATIO push). Split the function isp_handle_platform_ctio into two parts so that the timeout function for the ATIO push or isp_handle_platform_ctio can inform CAM that the requested CTIO(s) are now done. Clean up (cough) residual handling. What we need for Fibre Channel is to preserve the at_datalen field from the original incoming ATIO so we can calculate a 'true' residual. Unfortunately, we're not guaranteed to get that back from CAM. We'll *try* to find it hiding in the periph_priv field (layering violation)- but if an ATIO was passed in from user land- forget it. This means that we'll probably get residuals wrong for Fibre Channel commands we're completing with an error. It's too late to 4.1 release to fix this- too bad. Luckily the only device we'd really care about this occurring on is a tape device and they're still so rare as FC attached devices that this can be considered an untested combination anyway. Remove all CCINCR usage (resource autoreplenish). When we've proved to ourself that things are working properly, we can add it back in. Make sure we propage 'suggested' sense data from the incoming ATIO into the created system ATIO- and set sense_len appropriately. Correctly propagate tag values. Fall back to the model of generating (well, the functions in isp_pci.c do the work) multiple CTIOs based upon what we get from XPT. Instead of being able to pair Qlogic generated ATIOs with CAM ATIOs, and then to pair CAM CTIOs with Qlogic CTIOs, we have to take the CTIO passed to us from XPT, and if it implies that we have to generate extra Qlogic CTIOs, so be it. This means that we have to wait until the last CTIO in a sequence we generated completes before calling xpt_done. Executive summary- target mode actually now pretty much works well enough to tell folks about.
2000-07-18 06:58:28 +00:00
#if 0
(void) isp_target_putback_atio(isp, ccb);
#endif
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
SLIST_INSERT_HEAD(&tptr->atios,
&ccb->ccb_h, sim_links.sle);
} else {
SLIST_INSERT_HEAD(&tptr->inots, &ccb->ccb_h,
sim_links.sle);
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
rls_lun_statep(isp, tptr);
ccb->ccb_h.status = CAM_REQ_INPROG;
break;
}
case XPT_CONT_TARGET_IO:
{
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
ccb->ccb_h.status = isp_target_start_ctio(isp, ccb);
if (ccb->ccb_h.status != CAM_REQ_INPROG) {
if (isp->isp_osinfo.simqfrozen == 0) {
xpt_freeze_simq(sim, 1);
xpt_print_path(ccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGINFO,
"XPT_CONT_TARGET_IO freeze simq");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_RESOURCE;
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
XS_SETERR(ccb, CAM_REQUEUE_REQ);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
xpt_done(ccb);
} else {
ccb->ccb_h.status |= CAM_SIM_QUEUED;
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
break;
}
#endif
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
case XPT_RESET_DEV: /* BDR the specified SCSI device */
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
bus = cam_sim_bus(xpt_path_sim(ccb->ccb_h.path));
tgt = ccb->ccb_h.target_id;
tgt |= (bus << 16);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
error = isp_control(isp, ISPCTL_RESET_DEV, &tgt);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
if (error) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_done(ccb);
break;
case XPT_ABORT: /* Abort the specified CCB */
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
{
union ccb *accb = ccb->cab.abort_ccb;
switch (accb->ccb_h.func_code) {
#ifdef ISP_TARGET_MODE
case XPT_ACCEPT_TARGET_IO:
case XPT_IMMED_NOTIFY:
ccb->ccb_h.status = isp_abort_tgt_ccb(isp, ccb);
break;
case XPT_CONT_TARGET_IO:
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGERR, "cannot abort CTIOs yet");
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
ccb->ccb_h.status = CAM_UA_ABORT;
break;
#endif
case XPT_SCSI_IO:
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
error = isp_control(isp, ISPCTL_ABORT_CMD, ccb);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
if (error) {
ccb->ccb_h.status = CAM_UA_ABORT;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
xpt_done(ccb);
break;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
}
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
case XPT_SET_TRAN_SETTINGS: /* Nexus Settings */
cts = &ccb->cts;
tgt = cts->ccb_h.target_id;
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Add in isp_debug variable. It defaults to zero unless CAMDEBUG is defined where it defaults to one. Change simq width allocation to the max number of commands supported by the HBA after f/w fires up- not the constant MAXISPREQUEST value. Do some stylistic changes.
1999-10-17 18:50:47 +00:00
if (IS_SCSI(isp)) {
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
sdparam *sdp = isp->isp_param;
u_int16_t *dptr;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
sdp += bus;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
#if 0
if (cts->flags & CCB_TRANS_CURRENT_SETTINGS)
dptr = &sdp->isp_devparam[tgt].cur_dflags;
else
dptr = &sdp->isp_devparam[tgt].dev_flags;
#else
/*
* We always update (internally) from dev_flags
* so any request to change settings just gets
* vectored to that location.
*/
dptr = &sdp->isp_devparam[tgt].dev_flags;
#endif
/*
* Note that these operations affect the
Add in 1080 LVD support and some basis also for the 1240. The port database printout is now enabled.
1999-03-25 22:52:45 +00:00
* the goal flags (dev_flags)- not
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
* the current state flags. Then we mark
* things so that the next operation to
* this HBA will cause the update to occur.
*/
if (cts->valid & CCB_TRANS_DISC_VALID) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) {
*dptr |= DPARM_DISC;
} else {
*dptr &= ~DPARM_DISC;
}
}
if (cts->valid & CCB_TRANS_TQ_VALID) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) {
*dptr |= DPARM_TQING;
} else {
*dptr &= ~DPARM_TQING;
}
}
if (cts->valid & CCB_TRANS_BUS_WIDTH_VALID) {
switch (cts->bus_width) {
case MSG_EXT_WDTR_BUS_16_BIT:
*dptr |= DPARM_WIDE;
break;
default:
*dptr &= ~DPARM_WIDE;
}
}
/*
* Any SYNC RATE of nonzero and SYNC_OFFSET
* of nonzero will cause us to go to the
* selected (from NVRAM) maximum value for
* this device. At a later point, we'll
* allow finer control.
*/
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) &&
(cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) &&
(cts->sync_offset > 0)) {
*dptr |= DPARM_SYNC;
} else {
*dptr &= ~DPARM_SYNC;
}
Clean up some target mode debug messages. Fix (finally, I believe) Andrew's problems with SCSI on some alphas- do not call isp_update directly to update parameters- just mark them as being ready to update for the next command- the system would just hang on a READ CAPACITY for a drive. Really annoying because it wouldn't even timeout (and it has a timeout) so either the SET PARAMETERS call was nuking things or the f/w was really dropping the ball. approved: jkh Reviewed by: gallatin@freebsd.org
2000-02-15 00:52:52 +00:00
*dptr |= DPARM_SAFE_DFLT;
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
isp_prt(isp, ISP_LOGDEBUG0,
"%d.%d set %s period 0x%x offset 0x%x flags 0x%x",
Fix problems with incomplete conversions from printf to isp_prt.
2000-12-31 20:50:56 +00:00
bus, tgt, (cts->flags & CCB_TRANS_CURRENT_SETTINGS)?
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
"current" : "user",
sdp->isp_devparam[tgt].sync_period,
sdp->isp_devparam[tgt].sync_offset,
sdp->isp_devparam[tgt].dev_flags);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
sdp->isp_devparam[tgt].dev_update = 1;
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
isp->isp_update |= (1 << bus);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
cts = &ccb->cts;
tgt = cts->ccb_h.target_id;
Add in isp_debug variable. It defaults to zero unless CAMDEBUG is defined where it defaults to one. Change simq width allocation to the max number of commands supported by the HBA after f/w fires up- not the constant MAXISPREQUEST value. Do some stylistic changes.
1999-10-17 18:50:47 +00:00
if (IS_FC(isp)) {
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
/*
* a lot of normal SCSI things don't make sense.
*/
cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB;
cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
/*
* How do you measure the width of a high
* speed serial bus? Well, in bytes.
*
* Offset and period make no sense, though, so we set
* (above) a 'base' transfer speed to be gigabit.
*/
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
} else {
sdparam *sdp = isp->isp_param;
Add in 1080 LVD support and some basis also for the 1240. The port database printout is now enabled.
1999-03-25 22:52:45 +00:00
u_int16_t dval, pval, oval;
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
int bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
sdp += bus;
Add in 1080 LVD support and some basis also for the 1240. The port database printout is now enabled.
1999-03-25 22:52:45 +00:00
if (cts->flags & CCB_TRANS_CURRENT_SETTINGS) {
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
When asked to get the current transfer settings go do a dev_refresh isp_update call to get a better chance at seeing whether a recent settings change has latched up.
1999-05-12 19:00:16 +00:00
sdp->isp_devparam[tgt].dev_refresh = 1;
isp->isp_update |= (1 << bus);
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS,
NULL);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
dval = sdp->isp_devparam[tgt].cur_dflags;
Add in 1080 LVD support and some basis also for the 1240. The port database printout is now enabled.
1999-03-25 22:52:45 +00:00
oval = sdp->isp_devparam[tgt].cur_offset;
pval = sdp->isp_devparam[tgt].cur_period;
} else {
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
dval = sdp->isp_devparam[tgt].dev_flags;
Add in 1080 LVD support and some basis also for the 1240. The port database printout is now enabled.
1999-03-25 22:52:45 +00:00
oval = sdp->isp_devparam[tgt].sync_offset;
pval = sdp->isp_devparam[tgt].sync_period;
}
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
if (dval & DPARM_DISC) {
cts->flags |= CCB_TRANS_DISC_ENB;
}
if (dval & DPARM_TQING) {
cts->flags |= CCB_TRANS_TAG_ENB;
}
if (dval & DPARM_WIDE) {
cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
cts->valid = CCB_TRANS_BUS_WIDTH_VALID |
CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
Add in 1080 LVD support and some basis also for the 1240. The port database printout is now enabled.
1999-03-25 22:52:45 +00:00
if ((dval & DPARM_SYNC) && oval != 0) {
cts->sync_period = pval;
cts->sync_offset = oval;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
cts->valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
}
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
isp_prt(isp, ISP_LOGDEBUG0,
"%d.%d get %s period 0x%x offset 0x%x flags 0x%x",
Fix problems with incomplete conversions from printf to isp_prt.
2000-12-31 20:50:56 +00:00
bus, tgt, (cts->flags & CCB_TRANS_CURRENT_SETTINGS)?
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
"current" : "user", pval, oval, dval);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t secs_per_cylinder;
u_int32_t size_mb;
ccg = &ccb->ccg;
if (ccg->block_size == 0) {
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
isp_prt(isp, ISP_LOGERR,
"%d.%d XPT_CALC_GEOMETRY block size 0?",
ccg->ccb_h.target_id, ccg->ccb_h.target_lun);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
size_mb = ccg->volume_size /((1024L * 1024L) / ccg->block_size);
if (size_mb > 1024) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified bus */
Add in isp_debug variable. It defaults to zero unless CAMDEBUG is defined where it defaults to one. Change simq width allocation to the max number of commands supported by the HBA after f/w fires up- not the constant MAXISPREQUEST value. Do some stylistic changes.
1999-10-17 18:50:47 +00:00
bus = cam_sim_bus(sim);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_LOCK(isp);
Add in isp_debug variable. It defaults to zero unless CAMDEBUG is defined where it defaults to one. Change simq width allocation to the max number of commands supported by the HBA after f/w fires up- not the constant MAXISPREQUEST value. Do some stylistic changes.
1999-10-17 18:50:47 +00:00
error = isp_control(isp, ISPCTL_RESET_BUS, &bus);
Add in config_hook for catching when interrupts are safe- this allows us to not the ints are ok and also to (re)ENABLE isp interrupts. Remove all splcam()/splx() invocates and replace them with ISP_LOCK/ISP_UNLOCK macros.
2000-07-04 01:05:43 +00:00
ISP_UNLOCK(isp);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
if (error)
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
Allow fibre channel 'bus resets' to go through. Handle Loop Down/Loop Up events by freezing/unfreezing the simq- nice to have such control at this level! Do bus resets in attach layer (non-CAM defined code).
1999-02-09 01:08:38 +00:00
else {
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
if (cam_sim_bus(sim) && isp->isp_path2 != NULL)
xpt_async(AC_BUS_RESET, isp->isp_path2, NULL);
else if (isp->isp_path != NULL)
Allow fibre channel 'bus resets' to go through. Handle Loop Down/Loop Up events by freezing/unfreezing the simq- nice to have such control at this level! Do bus resets in attach layer (non-CAM defined code).
1999-02-09 01:08:38 +00:00
xpt_async(AC_BUS_RESET, isp->isp_path, NULL);
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
ccb->ccb_h.status = CAM_REQ_CMP;
Allow fibre channel 'bus resets' to go through. Handle Loop Down/Loop Up events by freezing/unfreezing the simq- nice to have such control at this level! Do bus resets in attach layer (non-CAM defined code).
1999-02-09 01:08:38 +00:00
}
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
xpt_done(ccb);
break;
case XPT_TERM_IO: /* Terminate the I/O process */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
#ifdef ISP_TARGET_MODE
Switch to using 16 bit handles instead of 32 bit handles. This is a pretty invasive change, but there are three good reasons to do this: 1. We'll never have > 16 bits of handle. 2. We can (eventually) enable the RIO (Reduced Interrupt Operation) bits which return multiple completing 16 bit handles in mailbox registers. 3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec changed such that at_reserved (which was 32 bits) was split into two pieces- and one of which was a 16 bit handle id that functions like the at_rxid for Fibre Channel (a tag for the f/w to correlate CTIOs with a particular command). Since we had to muck with that and this changed the whole handler architecture, we might as well... Propagate new at_handle on through int ct_fwhandle. Follow implications of changing to 16 bit handles. These above changes at least get Qlogic 1040 cards working in target mode again. 1080/12160 cards don't work yet. In isp.c: Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
/* XXX: we don't support 2nd bus target mode yet */
if (cam_sim_bus(sim) == 0)
cpi->target_sprt =
PIT_PROCESSOR | PIT_DISCONNECT | PIT_TERM_IO;
else
cpi->target_sprt = 0;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
#else
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
cpi->target_sprt = 0;
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
#endif
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
cpi->hba_eng_cnt = 0;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
cpi->max_target = ISP_MAX_TARGETS(isp) - 1;
cpi->max_lun = ISP_MAX_LUNS(isp) - 1;
cpi->bus_id = cam_sim_bus(sim);
Add in 1080 LVD support and some basis also for the 1240. The port database printout is now enabled.
1999-03-25 22:52:45 +00:00
if (IS_FC(isp)) {
cpi->hba_misc = PIM_NOBUSRESET;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
/*
* Because our loop ID can shift from time to time,
* make our initiator ID out of range of our bus.
*/
cpi->initiator_id = cpi->max_target + 1;
Add a number of interrelated CAM feature enhancements and bug fixes. NOTE: These changes will require recompilation of any userland applications, like cdrecord, xmcd, etc., that use the CAM passthrough interface. A make world is recommended. camcontrol.[c8]: - We now support two new commands, "tags" and "negotiate". - The tags commands allows users to view the number of tagged openings for a device as well as a number of other related parameters, and it allows users to set tagged openings for a device. - The negotiate command allows users to enable and disable disconnection and tagged queueing, set sync rates, offsets and bus width. Note that not all of those features are available for all controllers. Only the adv, ahc, and ncr drivers fully support all of the features at this point. Some cards do not allow the setting of sync rates, offsets and the like, and some of the drivers don't have any facilities to do so. Some drivers, like the adw driver, only support enabling or disabling sync negotiation, but do not support setting sync rates. - new description in the camcontrol man page of how to format a disk - cleanup of the camcontrol inquiry command - add support in the 'devlist' command for skipping unconfigured devices if -v was not specified on the command line. - make use of the new base_transfer_speed in the path inquiry CCB. - fix CCB bzero cases cam_xpt.c, cam_sim.[ch], cam_ccb.h: - new flags on many CCB function codes to designate whether they're non-immediate, use a user-supplied CCB, and can only be passed from userland programs via the xpt device. Use these flags in the transport layer and pass driver to categorize CCBs. - new flag in the transport layer device matching code for device nodes that indicates whether a device is unconfigured - bump the CAM version from 0x10 to 0x11 - Change the CAM ioctls to use the version as their group code, so we can force users to recompile code even when the CCB size doesn't change. - add + fill in a new value in the path inquiry CCB, base_transfer_speed. Remove a corresponding field from the cam_sim structure, and add code to every SIM to set this field to the proper value. - Fix the set transfer settings code in the transport layer. scsi_cd.c: - make some variables volatile instead of just casting them in various places - fix a race condition in the changer code - attach unless we get a "logical unit not supported" error. This should fix all of the cases where people have devices that return weird errors when they don't have media in the drive. scsi_da.c: - attach unless we get a "logical unit not supported" error scsi_pass.c: - for immediate CCBs, just malloc a CCB to send the user request in. This gets rid of the 'held' count problem in camcontrol tags. scsi_pass.h: - change the CAM ioctls to use the CAM version as their group code. adv driver: - Allow changing the sync rate and offset separately. adw driver - Allow changing the sync rate and offset separately. aha driver: - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs. ahc driver: - Allow setting offset and sync rate separately bt driver: - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs. NCR driver: - Fix the ultra/ultra 2 negotiation bug - allow setting both the sync rate and offset separately Other HBA drivers: - Put code in to set the base_transfer_speed field for XPT_GET_TRAN_SETTINGS CCBs. Reviewed by: gibbs, mjacob (isp), imp (aha)
1999-05-06 20:16:39 +00:00
/*
* Set base transfer capabilities for Fibre Channel.
* Technically not correct because we don't know
* what media we're running on top of- but we'll
* look good if we always say 100MB/s.
*/
cpi->base_transfer_speed = 100000;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
cpi->hba_inquiry = PI_TAG_ABLE;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
} else {
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
sdparam *sdp = isp->isp_param;
sdp += cam_sim_bus(xpt_path_sim(cpi->ccb_h.path));
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
Now that we fixed the isp_sendmarker botch, we can now do initial bus resets for ULTRA2/ULTRA3 cards again (which were turned off really because of a botch for dual bus configurations).
2000-04-21 19:18:06 +00:00
cpi->hba_misc = 0;
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
cpi->initiator_id = sdp->isp_initiator_id;
Add a number of interrelated CAM feature enhancements and bug fixes. NOTE: These changes will require recompilation of any userland applications, like cdrecord, xmcd, etc., that use the CAM passthrough interface. A make world is recommended. camcontrol.[c8]: - We now support two new commands, "tags" and "negotiate". - The tags commands allows users to view the number of tagged openings for a device as well as a number of other related parameters, and it allows users to set tagged openings for a device. - The negotiate command allows users to enable and disable disconnection and tagged queueing, set sync rates, offsets and bus width. Note that not all of those features are available for all controllers. Only the adv, ahc, and ncr drivers fully support all of the features at this point. Some cards do not allow the setting of sync rates, offsets and the like, and some of the drivers don't have any facilities to do so. Some drivers, like the adw driver, only support enabling or disabling sync negotiation, but do not support setting sync rates. - new description in the camcontrol man page of how to format a disk - cleanup of the camcontrol inquiry command - add support in the 'devlist' command for skipping unconfigured devices if -v was not specified on the command line. - make use of the new base_transfer_speed in the path inquiry CCB. - fix CCB bzero cases cam_xpt.c, cam_sim.[ch], cam_ccb.h: - new flags on many CCB function codes to designate whether they're non-immediate, use a user-supplied CCB, and can only be passed from userland programs via the xpt device. Use these flags in the transport layer and pass driver to categorize CCBs. - new flag in the transport layer device matching code for device nodes that indicates whether a device is unconfigured - bump the CAM version from 0x10 to 0x11 - Change the CAM ioctls to use the version as their group code, so we can force users to recompile code even when the CCB size doesn't change. - add + fill in a new value in the path inquiry CCB, base_transfer_speed. Remove a corresponding field from the cam_sim structure, and add code to every SIM to set this field to the proper value. - Fix the set transfer settings code in the transport layer. scsi_cd.c: - make some variables volatile instead of just casting them in various places - fix a race condition in the changer code - attach unless we get a "logical unit not supported" error. This should fix all of the cases where people have devices that return weird errors when they don't have media in the drive. scsi_da.c: - attach unless we get a "logical unit not supported" error scsi_pass.c: - for immediate CCBs, just malloc a CCB to send the user request in. This gets rid of the 'held' count problem in camcontrol tags. scsi_pass.h: - change the CAM ioctls to use the CAM version as their group code. adv driver: - Allow changing the sync rate and offset separately. adw driver - Allow changing the sync rate and offset separately. aha driver: - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs. ahc driver: - Allow setting offset and sync rate separately bt driver: - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs. NCR driver: - Fix the ultra/ultra 2 negotiation bug - allow setting both the sync rate and offset separately Other HBA drivers: - Put code in to set the base_transfer_speed field for XPT_GET_TRAN_SETTINGS CCBs. Reviewed by: gibbs, mjacob (isp), imp (aha)
1999-05-06 20:16:39 +00:00
cpi->base_transfer_speed = 3300;
Update QLogic ISP support for CAM. Add preliminary target mode support. Submitted by: Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
}
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Qlogic", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
#define ISPDDB (CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
void
clarify headers;move uninit to outer layer;remove watchdog
1998-12-28 19:22:27 +00:00
isp_done(struct ccb_scsiio *sccb)
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
{
struct ispsoftc *isp = XS_ISP(sccb);
if (XS_NOERR(sccb))
XS_SETERR(sccb, CAM_REQ_CMP);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
if ((sccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
(sccb->scsi_status != SCSI_STATUS_OK)) {
sccb->ccb_h.status &= ~CAM_STATUS_MASK;
Clean up some debug printing. Find the correct lun when SCCLUN is defined. If we complete with a check condition but no sense data, say we had an AUTOSENSE failure.
2000-01-04 03:45:49 +00:00
if ((sccb->scsi_status == SCSI_STATUS_CHECK_COND) &&
(sccb->ccb_h.status & CAM_AUTOSNS_VALID) == 0) {
sccb->ccb_h.status |= CAM_AUTOSENSE_FAIL;
} else {
sccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
}
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
}
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
sccb->ccb_h.status &= ~CAM_SIM_QUEUED;
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
if ((sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if ((sccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
sccb->ccb_h.status |= CAM_DEV_QFRZN;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
xpt_freeze_devq(sccb->ccb_h.path, 1);
if (sccb->scsi_status != SCSI_STATUS_OK)
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"freeze devq %d.%d %x %x",
sccb->ccb_h.target_id,
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
sccb->ccb_h.target_lun, sccb->ccb_h.status,
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
sccb->scsi_status);
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
}
}
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
/*
* If we were frozen waiting resources, clear that we were frozen
* waiting for resources. If we are no longer frozen, and the devq
* isn't frozen, mark the completing CCB to have the XPT layer
* release the simq.
*/
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_RESOURCE) {
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_RESOURCE;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
if (isp->isp_osinfo.simqfrozen == 0) {
if ((sccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"isp_done->relsimq");
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
sccb->ccb_h.status |= CAM_RELEASE_SIMQ;
} else {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"isp_done->devq frozen");
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
}
} else {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"isp_done -> simqfrozen = %x",
isp->isp_osinfo.simqfrozen);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
}
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
}
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
if ((CAM_DEBUGGED(sccb->ccb_h.path, ISPDDB)) &&
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
(sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
xpt_print_path(sccb->ccb_h.path);
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
isp_prt(isp, ISP_LOGINFO,
"cam completion status 0x%x", sccb->ccb_h.status);
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
}
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
XS_CMD_S_DONE(sccb);
if (XS_CMD_WDOG_P(sccb) == 0) {
untimeout(isp_watchdog, (caddr_t)sccb, sccb->ccb_h.timeout_ch);
if (XS_CMD_GRACE_P(sccb)) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"finished command on borrowed time");
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
}
XS_CMD_S_CLEAR(sccb);
Make sure we do locking if we call isp_intr. Make sure we enter Giant for now if we call into cam for completion.
2000-12-29 19:06:32 +00:00
ISP_UNLOCK(isp);
#ifdef ISP_SMPLOCK
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&Giant);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
xpt_done((union ccb *) sccb);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&Giant);
Make sure we do locking if we call isp_intr. Make sure we enter Giant for now if we call into cam for completion.
2000-12-29 19:06:32 +00:00
#else
xpt_done((union ccb *) sccb);
#endif
ISP_LOCK(isp);
Add in the enabling of interrupts (to isp_attach). Clean up a busted comment. Check against firmware state- not loop state when enabling target mode. Other changes have to do with no longer enabling/disabling interrupts at will. Rearchitect command watchdog timeouts- First of all, set the timeout period for a command that has a timeout (in isp_action) to the period of time requested *plus* two seconds. We don't want the Qlogic firmware and the host system to race each other to report a dead command (the watchdog is there to catch dead and/or broken firmware). Next, make sure that the command being watched isn't done yet. If it's not done yet, check for INT_PENDING and call isp_intr- if that said it serviced an interrupt, check to see whether the command is now done (this is what the "IN WATCHDOG" private flag is for- if isp_intr completes the command, it won't call xpt_done on it because isp_watchdog is still looking at the command). If no interrupt was pending, or the command wasn't completed, check to see if we've set the private 'grace period' flag. If so, the command really *is* dead, so report it as dead and complete it with a CAM_CMD_TIMEOUT value. If the grace period flag wasn't set, set it and issue a SYNCHRONIZE_ALL Marker Request Queue entry and re-set the timeout for one second from now (see Revision 1.45 isp.c notes for more on this) to give the firmware a final chance to complete this command.
2000-06-27 19:31:02 +00:00
}
make a real "done" func; clarify some LUN widths
1998-12-05 01:31:21 +00:00
}
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
int
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
isp_async(struct ispsoftc *isp, ispasync_t cmd, void *arg)
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
{
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
int bus, rv = 0;
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
switch (cmd) {
case ISPASYNC_NEW_TGT_PARAMS:
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
{
int flags, tgt;
sdparam *sdp = isp->isp_param;
struct ccb_trans_settings neg;
struct cam_path *tmppath;
tgt = *((int *)arg);
bus = (tgt >> 16) & 0xffff;
tgt &= 0xffff;
sdp += bus;
if (xpt_create_path(&tmppath, NULL,
cam_sim_path(bus? isp->isp_sim2 : isp->isp_sim),
tgt, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"isp_async cannot make temp path for %d.%d",
tgt, bus);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
rv = -1;
break;
}
flags = sdp->isp_devparam[tgt].cur_dflags;
neg.valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
if (flags & DPARM_DISC) {
neg.flags |= CCB_TRANS_DISC_ENB;
}
if (flags & DPARM_TQING) {
neg.flags |= CCB_TRANS_TAG_ENB;
}
neg.valid |= CCB_TRANS_BUS_WIDTH_VALID;
neg.bus_width = (flags & DPARM_WIDE)?
MSG_EXT_WDTR_BUS_8_BIT : MSG_EXT_WDTR_BUS_16_BIT;
neg.sync_period = sdp->isp_devparam[tgt].cur_period;
neg.sync_offset = sdp->isp_devparam[tgt].cur_offset;
if (flags & DPARM_SYNC) {
neg.valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
}
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"NEW_TGT_PARAMS bus %d tgt %d period %x offset %x flags %x",
bus, tgt, neg.sync_period, neg.sync_offset, flags);
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
xpt_setup_ccb(&neg.ccb_h, tmppath, 1);
xpt_async(AC_TRANSFER_NEG, tmppath, &neg);
xpt_free_path(tmppath);
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
break;
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
}
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
case ISPASYNC_BUS_RESET:
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
bus = *((int *)arg);
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGINFO, "SCSI bus reset on bus %d detected",
bus);
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
if (bus > 0 && isp->isp_path2) {
xpt_async(AC_BUS_RESET, isp->isp_path2, NULL);
} else if (isp->isp_path) {
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
xpt_async(AC_BUS_RESET, isp->isp_path, NULL);
}
break;
case ISPASYNC_LOOP_DOWN:
if (isp->isp_path) {
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
if (isp->isp_osinfo.simqfrozen == 0) {
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"loop down freeze simq");
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
xpt_freeze_simq(isp->isp_sim, 1);
}
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
}
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGINFO, "Loop DOWN");
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
break;
case ISPASYNC_LOOP_UP:
if (isp->isp_path) {
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
int wasfrozen =
isp->isp_osinfo.simqfrozen & SIMQFRZ_LOOPDOWN;
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_LOOPDOWN;
if (wasfrozen && isp->isp_osinfo.simqfrozen == 0) {
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
xpt_release_simq(isp->isp_sim, 1);
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"loop up release simq");
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
}
}
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGINFO, "Loop UP");
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
break;
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
case ISPASYNC_PROMENADE:
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
{
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
const char *fmt = "Target %d (Loop 0x%x) Port ID 0x%x "
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
"(role %s) %s\n Port WWN 0x%08x%08x\n Node WWN 0x%08x%08x";
static const char *roles[4] = {
Clarify and cleanup some CAM queueing breakages.
1999-08-16 20:11:45 +00:00
"(none)", "Target", "Initiator", "Target/Initiator"
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
};
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
fcparam *fcp = isp->isp_param;
int tgt = *((int *) arg);
struct lportdb *lp = &fcp->portdb[tgt];
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGINFO, fmt, tgt, lp->loopid, lp->portid,
Do some cleanup based upon adapter role- mainly not enabling interrupts if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE. Make sure we note if something is a fabric device. Target mode: Finally fix (to a first approximation) SCSI Target Mode again- we needed to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD so that targbh won't confuse us. Comment out the drainqueue stuff for now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
roles[lp->roles & 0x3],
(lp->valid)? "Arrived" : "Departed",
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
(u_int32_t) (lp->port_wwn >> 32),
(u_int32_t) (lp->port_wwn & 0xffffffffLL),
(u_int32_t) (lp->node_wwn >> 32),
(u_int32_t) (lp->node_wwn & 0xffffffffLL));
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
break;
}
case ISPASYNC_CHANGE_NOTIFY:
Follow the ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT change. Also, ISPASYNC_NOTIFY_CHANGE now is for both local loop && fabric changes.
2001-01-09 02:47:15 +00:00
if (arg == (void *) 1) {
isp_prt(isp, ISP_LOGINFO,
"Name Server Database Changed");
} else {
isp_prt(isp, ISP_LOGINFO,
"Name Server Database Changed");
}
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
break;
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
case ISPASYNC_FABRIC_DEV:
{
Do more cleanup of the usage of 0..125 for F-port topologies.
2001-01-15 18:34:49 +00:00
int target, lrange;
struct lportdb *lp = NULL;
Prettier print of fabric devices being attached- say what kind of port they are (e.g., F_Port vs. N_Port). Approved: jkh
2000-02-29 05:53:10 +00:00
char *pt;
sns_ganrsp_t *resp = (sns_ganrsp_t *) arg;
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
u_int32_t portid;
Prettier print of fabric devices being attached- say what kind of port they are (e.g., F_Port vs. N_Port). Approved: jkh
2000-02-29 05:53:10 +00:00
u_int64_t wwpn, wwnn;
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
fcparam *fcp = isp->isp_param;
portid =
(((u_int32_t) resp->snscb_port_id[0]) << 16) |
(((u_int32_t) resp->snscb_port_id[1]) << 8) |
(((u_int32_t) resp->snscb_port_id[2]));
Prettier print of fabric devices being attached- say what kind of port they are (e.g., F_Port vs. N_Port). Approved: jkh
2000-02-29 05:53:10 +00:00
wwpn =
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
(((u_int64_t)resp->snscb_portname[0]) << 56) |
(((u_int64_t)resp->snscb_portname[1]) << 48) |
(((u_int64_t)resp->snscb_portname[2]) << 40) |
(((u_int64_t)resp->snscb_portname[3]) << 32) |
(((u_int64_t)resp->snscb_portname[4]) << 24) |
(((u_int64_t)resp->snscb_portname[5]) << 16) |
(((u_int64_t)resp->snscb_portname[6]) << 8) |
(((u_int64_t)resp->snscb_portname[7]));
Prettier print of fabric devices being attached- say what kind of port they are (e.g., F_Port vs. N_Port). Approved: jkh
2000-02-29 05:53:10 +00:00
wwnn =
(((u_int64_t)resp->snscb_nodename[0]) << 56) |
(((u_int64_t)resp->snscb_nodename[1]) << 48) |
(((u_int64_t)resp->snscb_nodename[2]) << 40) |
(((u_int64_t)resp->snscb_nodename[3]) << 32) |
(((u_int64_t)resp->snscb_nodename[4]) << 24) |
(((u_int64_t)resp->snscb_nodename[5]) << 16) |
(((u_int64_t)resp->snscb_nodename[6]) << 8) |
(((u_int64_t)resp->snscb_nodename[7]));
if (portid == 0 || wwpn == 0) {
break;
}
switch (resp->snscb_port_type) {
case 1:
pt = " N_Port";
break;
case 2:
pt = " NL_Port";
break;
case 3:
pt = "F/NL_Port";
break;
case 0x7f:
pt = " Nx_Port";
break;
case 0x81:
pt = " F_port";
break;
case 0x82:
pt = " FL_Port";
break;
case 0x84:
pt = " E_port";
break;
default:
pt = "?";
break;
}
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGINFO,
"%s @ 0x%x, Node 0x%08x%08x Port %08x%08x",
pt, portid, ((u_int32_t) (wwnn >> 32)), ((u_int32_t) wwnn),
Prettier print of fabric devices being attached- say what kind of port they are (e.g., F_Port vs. N_Port). Approved: jkh
2000-02-29 05:53:10 +00:00
((u_int32_t) (wwpn >> 32)), ((u_int32_t) wwpn));
Do more cleanup of the usage of 0..125 for F-port topologies.
2001-01-15 18:34:49 +00:00
/*
* We're only interested in SCSI_FCP types (for now)
*/
if ((resp->snscb_fc4_types[2] & 1) == 0) {
break;
}
if (fcp->isp_topo != TOPO_F_PORT)
lrange = FC_SNS_ID+1;
else
lrange = 0;
/*
* Is it already in our list?
*/
for (target = lrange; target < MAX_FC_TARG; target++) {
if (target >= FL_PORT_ID && target <= FC_SNS_ID) {
continue;
}
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
lp = &fcp->portdb[target];
Do more cleanup of the usage of 0..125 for F-port topologies.
2001-01-15 18:34:49 +00:00
if (lp->port_wwn == wwpn && lp->node_wwn == wwnn) {
lp->fabric_dev = 1;
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
break;
Do more cleanup of the usage of 0..125 for F-port topologies.
2001-01-15 18:34:49 +00:00
}
F/W revisions now a tuple (not a duple). Fix pre-CAM code.
1999-04-04 01:35:03 +00:00
}
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
if (target < MAX_FC_TARG) {
clarify headers;move uninit to outer layer;remove watchdog
1998-12-28 19:22:27 +00:00
break;
}
Do more cleanup of the usage of 0..125 for F-port topologies.
2001-01-15 18:34:49 +00:00
for (target = lrange; target < MAX_FC_TARG; target++) {
if (target >= FL_PORT_ID && target <= FC_SNS_ID) {
continue;
}
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
lp = &fcp->portdb[target];
Do more cleanup of the usage of 0..125 for F-port topologies.
2001-01-15 18:34:49 +00:00
if (lp->port_wwn == 0) {
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
break;
Do more cleanup of the usage of 0..125 for F-port topologies.
2001-01-15 18:34:49 +00:00
}
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
}
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
if (target == MAX_FC_TARG) {
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"no more space for fabric devices");
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
break;
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
}
Prettier print of fabric devices being attached- say what kind of port they are (e.g., F_Port vs. N_Port). Approved: jkh
2000-02-29 05:53:10 +00:00
lp->node_wwn = wwnn;
lp->port_wwn = wwpn;
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
lp->portid = portid;
Do more cleanup of the usage of 0..125 for F-port topologies.
2001-01-15 18:34:49 +00:00
lp->fabric_dev = 1;
A wad of changes- prepping for 1080/1240 support (which caused a massive thwank in register layout goop). A different mboxcmd approach. Some PDB change infrastructure. Some better management of loopdown/loopup events (keep them distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
break;
}
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
#ifdef ISP_TARGET_MODE
case ISPASYNC_TARGET_MESSAGE:
{
tmd_msg_t *mp = arg;
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"bus %d iid %d tgt %d lun %d ttype %x tval %x msg[0]=%x",
mp->nt_bus, (int) mp->nt_iid, (int) mp->nt_tgt,
(int) mp->nt_lun, mp->nt_tagtype, mp->nt_tagval,
mp->nt_msg[0]);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
break;
}
case ISPASYNC_TARGET_EVENT:
{
tmd_event_t *ep = arg;
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGDEBUG2,
"bus %d event code 0x%x", ep->ev_bus, ep->ev_event);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
break;
}
case ISPASYNC_TARGET_ACTION:
switch (((isphdr_t *)arg)->rqs_entry_type) {
default:
Replace some more printfs with isp_prt's. Use isp_prt/ISP_LOGDEBUG0 for rate setting/getting printouts.
2000-12-05 07:39:54 +00:00
isp_prt(isp, ISP_LOGWARN,
"event 0x%x for unhandled target action",
((isphdr_t *)arg)->rqs_entry_type);
Make a static chain of isp softcs- gdb usage becomes a lot easier. Add in a very large amount of target mode support code- this is just a first pass at this. It's a difficult thing because some of the code can be in platform independent areas (see isp_target.?) but a lot has to be in platform dependent areas because of not only the tight coupling of received commands/events and the specific OS subsystem but because the platform independent code has (deliberately) no event/wait mechanisms.
2000-01-03 23:55:30 +00:00
break;
case RQSTYPE_ATIO:
rv = isp_handle_platform_atio(isp, (at_entry_t *) arg);
break;
case RQSTYPE_ATIO2:
rv = isp_handle_platform_atio2(isp, (at2_entry_t *)arg);
break;
case RQSTYPE_CTIO2:
case RQSTYPE_CTIO:
rv = isp_handle_platform_ctio(isp, arg);
break;
case RQSTYPE_ENABLE_LUN:
case RQSTYPE_MODIFY_LUN:
isp_cv_signal_rqe(isp, ((lun_entry_t *)arg)->le_status);
break;
}
break;
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
#endif
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
default:
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
isp_prt(isp, ISP_LOGERR, "unknown isp_async event %d", cmd);
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
rv = -1;
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
break;
}
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
return (rv);
Implement and use Fast Posting for both parallel && fibre. Redo a bit of the startup code. Implement a call to outer framework function so that asynchronous events can be handled (e.g., speed negotiation, target mode). Roll internal release tags.
1999-01-30 07:29:00 +00:00
}
clarify headers;move uninit to outer layer;remove watchdog
1998-12-28 19:22:27 +00:00
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
clarify headers;move uninit to outer layer;remove watchdog
1998-12-28 19:22:27 +00:00
/*
* Locks are held before coming here.
*/
void
Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
isp_uninit(struct ispsoftc *isp)
clarify headers;move uninit to outer layer;remove watchdog
1998-12-28 19:22:27 +00:00
{
A large set of changes to handle dual bus adapters.
1999-05-11 05:10:06 +00:00
ISP_WRITE(isp, HCCR, HCCR_CMD_RESET);
clarify headers;move uninit to outer layer;remove watchdog
1998-12-28 19:22:27 +00:00
DISABLE_INTS(isp);
}
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
void
isp_prt(struct ispsoftc *isp, int level, const char *fmt, ...)
{
va_list ap;
if (level != ISP_LOGALL && (level & isp->isp_dblev) == 0) {
return;
}
Finally eliminate as many of the printf calls as possible (still leaving ones where we have a CAM path) and replacing them with calls to isp_prt., Eliminate isp_unit references- we no longer have an isp_unit- we now have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
printf("%s: ", device_get_nameunit(isp->isp_dev));
Core version 2.0 rewrite. In this file we replace isp_tdebug with isp_prt calls. We now use an argument to the ISPCTL_FCLINK_TEST call. We change all IDPRINTF macros to isp_prt calls. We add the isp_prt function here.
2000-08-01 06:31:44 +00:00
va_start(ap, fmt);
vprintf(fmt, ap);
va_end(ap);
printf("\n");
}
Reference in New Issue Copy Permalink