freebsd-nq/share/mk/sys.mk

358 lines
6.8 KiB
Makefile
Raw Normal View History

# from: @(#)sys.mk 8.2 (Berkeley) 3/21/94
1999-08-28 00:22:10 +00:00
# $FreeBSD$
1994-05-30 19:09:18 +00:00
unix ?= We run FreeBSD, not UNIX.
.FreeBSD ?= true
1994-05-30 19:09:18 +00:00
# If the special target .POSIX appears (without prerequisites or
# commands) before the first noncomment line in the makefile, make shall
# process the makefile as specified by the Posix 1003.2 specification.
# make(1) sets the special macro %POSIX in this case (to the actual
# value "1003.2", for what it's worth).
#
# The rules below use this macro to distinguish between Posix-compliant
# and default behaviour.
.if defined(%POSIX)
.SUFFIXES: .o .c .y .l .a .sh .f
.else
.SUFFIXES: .out .a .ln .o .c .cc .cpp .cxx .C .m .F .f .e .r .y .l .S .asm .s .cl .p .h .sh
.endif
1994-05-30 19:09:18 +00:00
AR ?= ar
.if defined(%POSIX)
ARFLAGS ?= -rv
.else
ARFLAGS ?= rl
.endif
RANLIB ?= ranlib
1994-05-30 19:09:18 +00:00
AS ?= as
AFLAGS ?=
1994-05-30 19:09:18 +00:00
.if defined(%POSIX)
CC ?= c89
CFLAGS ?= -O
.else
CC ?= cc
.if ${MACHINE_ARCH} == "arm" || ${MACHINE_ARCH} == "mips"
CFLAGS ?= -O -pipe
.else
CFLAGS ?= -O2 -pipe
.endif
.if defined(NO_STRICT_ALIASING)
CFLAGS += -fno-strict-aliasing
.endif
.endif
1994-05-30 19:09:18 +00:00
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
# Turn CTF conversion off by default for now. This default could be
# changed later if DTrace becomes popular.
.if !defined(WITH_CTF)
NO_CTF = 1
.endif
# C Type Format data is required for DTrace
CTFFLAGS ?= -L VERSION
.if !defined(NO_CTF)
CTFCONVERT ?= ctfconvert
CTFMERGE ?= ctfmerge
.if defined(CFLAGS) && (${CFLAGS:M-g} != "")
CTFFLAGS += -g
.else
CFLAGS += -g
.endif
.endif
CXX ?= c++
CXXFLAGS ?= ${CFLAGS:N-std=*:N-Wnested-externs:N-W*-prototypes:N-Wno-pointer-sign}
1994-05-30 19:09:18 +00:00
CPP ?= cpp
1994-05-30 19:09:18 +00:00
.if empty(.MAKEFLAGS:M-s)
ECHO ?= echo
ECHODIR ?= echo
.else
ECHO ?= true
.if ${.MAKEFLAGS:M-s} == "-s"
ECHODIR ?= echo
.else
ECHODIR ?= true
.endif
.endif
1994-05-30 19:09:18 +00:00
.if !empty(.MAKEFLAGS:M-n) && ${.MAKEFLAGS:M-n} == "-n"
_+_ ?=
.else
_+_ ?= +
.endif
.if defined(%POSIX)
FC ?= fort77
FFLAGS ?= -O 1
.else
FC ?= f77
FFLAGS ?= -O
.endif
EFLAGS ?=
1994-05-30 19:09:18 +00:00
INSTALL ?= install
LEX ?= lex
LFLAGS ?=
1994-05-30 19:09:18 +00:00
LD ?= ld
LDFLAGS ?=
1994-05-30 19:09:18 +00:00
LINT ?= lint
LINTFLAGS ?= -cghapbx
LINTKERNFLAGS ?= ${LINTFLAGS}
LINTOBJFLAGS ?= -cghapbxu -i
LINTOBJKERNFLAGS?= ${LINTOBJFLAGS}
LINTLIBFLAGS ?= -cghapbxu -C ${LIB}
1994-05-30 19:09:18 +00:00
MAKE ?= make
1994-05-30 19:09:18 +00:00
OBJC ?= cc
OBJCFLAGS ?= ${OBJCINCLUDES} ${CFLAGS} -Wno-import
PC ?= pc
PFLAGS ?=
1994-05-30 19:09:18 +00:00
RC ?= f77
RFLAGS ?=
SHELL ?= sh
YACC ?= yacc
.if defined(%POSIX)
YFLAGS ?=
.else
YFLAGS ?= -d
.endif
.if defined(%POSIX)
# Posix 1003.2 mandated rules
#
# Quoted directly from the Posix 1003.2 draft, only the macros
# $@, $< and $* have been replaced by ${.TARGET}, ${.IMPSRC}, and
# ${.PREFIX}, resp.
# SINGLE SUFFIX RULES
.c:
${CC} ${CFLAGS} ${LDFLAGS} -o ${.TARGET} ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
.f:
${FC} ${FFLAGS} ${LDFLAGS} -o ${.TARGET} ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
.sh:
cp ${.IMPSRC} ${.TARGET}
chmod a+x ${.TARGET}
# DOUBLE SUFFIX RULES
.c.o:
${CC} ${CFLAGS} -c ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
.f.o:
${FC} ${FFLAGS} -c ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
.y.o:
${YACC} ${YFLAGS} ${.IMPSRC}
${CC} ${CFLAGS} -c y.tab.c
rm -f y.tab.c
mv y.tab.o ${.TARGET}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
.l.o:
${LEX} ${LFLAGS} ${.IMPSRC}
${CC} ${CFLAGS} -c lex.yy.c
rm -f lex.yy.c
mv lex.yy.o ${.TARGET}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
.y.c:
${YACC} ${YFLAGS} ${.IMPSRC}
mv y.tab.c ${.TARGET}
.l.c:
${LEX} ${LFLAGS} ${.IMPSRC}
mv lex.yy.c ${.TARGET}
.c.a:
${CC} ${CFLAGS} -c ${.IMPSRC}
${AR} ${ARFLAGS} ${.TARGET} ${.PREFIX}.o
rm -f ${.PREFIX}.o
.f.a:
${FC} ${FFLAGS} -c ${.IMPSRC}
${AR} ${ARFLAGS} ${.TARGET} ${.PREFIX}.o
rm -f ${.PREFIX}.o
.else
# non-Posix rule set
.sh:
cp -p ${.IMPSRC} ${.TARGET}
chmod a+x ${.TARGET}
1994-05-30 19:09:18 +00:00
.c.ln:
${LINT} ${LINTOBJFLAGS} ${CFLAGS:M-[DIU]*} ${.IMPSRC} || \
touch ${.TARGET}
.cc.ln .C.ln .cpp.ln .cxx.ln:
${LINT} ${LINTOBJFLAGS} ${CXXFLAGS:M-[DIU]*} ${.IMPSRC} || \
touch ${.TARGET}
.c:
${CC} ${CFLAGS} ${LDFLAGS} ${.IMPSRC} ${LDLIBS} -o ${.TARGET}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1994-05-30 19:09:18 +00:00
.c.o:
${CC} ${CFLAGS} -c ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1994-05-30 19:09:18 +00:00
.cc .cpp .cxx .C:
${CXX} ${CXXFLAGS} ${LDFLAGS} ${.IMPSRC} ${LDLIBS} -o ${.TARGET}
.cc.o .cpp.o .cxx.o .C.o:
${CXX} ${CXXFLAGS} -c ${.IMPSRC}
.m.o:
${OBJC} ${OBJCFLAGS} -c ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1994-05-30 19:09:18 +00:00
.p.o:
${PC} ${PFLAGS} -c ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1994-05-30 19:09:18 +00:00
.e .r .F .f:
${FC} ${RFLAGS} ${EFLAGS} ${FFLAGS} ${LDFLAGS} ${.IMPSRC} ${LDLIBS} \
-o ${.TARGET}
1994-05-30 19:09:18 +00:00
.e.o .r.o .F.o .f.o:
${FC} ${RFLAGS} ${EFLAGS} ${FFLAGS} -c ${.IMPSRC}
.S.o:
${CC} ${CFLAGS} -c ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
.asm.o:
${CC} -x assembler-with-cpp ${CFLAGS} -c ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
.s.o:
${AS} ${AFLAGS} -o ${.TARGET} ${.IMPSRC}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1996-06-02 17:04:08 +00:00
# XXX not -j safe
1994-05-30 19:09:18 +00:00
.y.o:
1996-06-02 17:04:08 +00:00
${YACC} ${YFLAGS} ${.IMPSRC}
${CC} ${CFLAGS} -c y.tab.c -o ${.TARGET}
rm -f y.tab.c
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1994-05-30 19:09:18 +00:00
.l.o:
${LEX} -t ${LFLAGS} ${.IMPSRC} > ${.PREFIX}.tmp.c
${CC} ${CFLAGS} -c ${.PREFIX}.tmp.c -o ${.TARGET}
rm -f ${.PREFIX}.tmp.c
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1994-05-30 19:09:18 +00:00
# XXX not -j safe
1994-05-30 19:09:18 +00:00
.y.c:
${YACC} ${YFLAGS} ${.IMPSRC}
mv y.tab.c ${.TARGET}
1994-05-30 19:09:18 +00:00
.l.c:
${LEX} -t ${LFLAGS} ${.IMPSRC} > ${.TARGET}
1994-05-30 19:09:18 +00:00
.s.out .c.out .o.out:
${CC} ${CFLAGS} ${LDFLAGS} ${.IMPSRC} ${LDLIBS} -o ${.TARGET}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1994-05-30 19:09:18 +00:00
.f.out .F.out .r.out .e.out:
${FC} ${EFLAGS} ${RFLAGS} ${FFLAGS} ${LDFLAGS} ${.IMPSRC} \
1994-05-30 19:09:18 +00:00
${LDLIBS} -o ${.TARGET}
rm -f ${.PREFIX}.o
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1994-05-30 19:09:18 +00:00
1996-06-02 17:04:08 +00:00
# XXX not -j safe
1994-05-30 19:09:18 +00:00
.y.out:
1996-06-02 17:04:08 +00:00
${YACC} ${YFLAGS} ${.IMPSRC}
${CC} ${CFLAGS} ${LDFLAGS} y.tab.c ${LDLIBS} -ly -o ${.TARGET}
rm -f y.tab.c
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
1994-05-30 19:09:18 +00:00
.l.out:
${LEX} -t ${LFLAGS} ${.IMPSRC} > ${.PREFIX}.tmp.c
${CC} ${CFLAGS} ${LDFLAGS} ${.PREFIX}.tmp.c ${LDLIBS} -ll -o ${.TARGET}
rm -f ${.PREFIX}.tmp.c
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
.if defined(CTFCONVERT)
${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
.endif
# FreeBSD build pollution. Hide it in the non-POSIX part of the ifdef.
__MAKE_CONF?=/etc/make.conf
.if exists(${__MAKE_CONF})
.include "${__MAKE_CONF}"
.endif
.if defined(__MAKE_SHELL) && !empty(__MAKE_SHELL)
SHELL= ${__MAKE_SHELL}
.SHELL: path=${__MAKE_SHELL}
.endif
# Default executable format
# XXX hint for bsd.port.mk
OBJFORMAT?= elf
# Toggle on warnings
.WARN: dirsyntax
.endif
.include <bsd.compat.mk>
.include <bsd.cpu.mk>