d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2c17901060
freebsd-nq/sys/dev/nfe/if_nfe.c

3220 lines
81 KiB
C
Raw Normal View History

Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* $OpenBSD: if_nfe.c,v 1.54 2006/04/07 12:38:12 jsg Exp $ */
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
/*-
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
* Copyright (c) 2006 Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp>
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
* Copyright (c) 2006 Damien Bergamini <damien.bergamini@free.fr>
* Copyright (c) 2005, 2006 Jonathan Gray <jsg@openbsd.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/* Driver for NVIDIA nForce MCP Fast Ethernet and Gigabit Ethernet */
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifdef HAVE_KERNEL_OPTION_HEADERS
#include "opt_device_polling.h"
#endif
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#include <sys/param.h>
#include <sys/endian.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#include <sys/module.h>
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#include <sys/kernel.h>
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
#include <sys/queue.h>
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#include <sys/socket.h>
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
#include <sys/sysctl.h>
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#include <sys/taskqueue.h>
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#include <net/if.h>
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#include <net/if_arp.h>
#include <net/ethernet.h>
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_vlan_var.h>
#include <net/bpf.h>
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#include <dev/nfe/if_nfereg.h>
#include <dev/nfe/if_nfevar.h>
MODULE_DEPEND(nfe, pci, 1, 1, 1);
MODULE_DEPEND(nfe, ether, 1, 1, 1);
MODULE_DEPEND(nfe, miibus, 1, 1, 1);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/* "device miibus" required. See GENERIC if you get errors here. */
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#include "miibus_if.h"
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static int nfe_probe(device_t);
static int nfe_attach(device_t);
static int nfe_detach(device_t);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static int nfe_suspend(device_t);
static int nfe_resume(device_t);
Fix function prototype for device_shutdown method.
2007-11-22 02:45:00 +00:00
static int nfe_shutdown(device_t);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void nfe_power(struct nfe_softc *);
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static int nfe_miibus_readreg(device_t, int, int);
static int nfe_miibus_writereg(device_t, int, int, int);
static void nfe_miibus_statchg(device_t);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void nfe_link_task(void *, int);
static void nfe_set_intr(struct nfe_softc *);
static __inline void nfe_enable_intr(struct nfe_softc *);
static __inline void nfe_disable_intr(struct nfe_softc *);
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static int nfe_ioctl(struct ifnet *, u_long, caddr_t);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void nfe_alloc_msix(struct nfe_softc *, int);
static int nfe_intr(void *);
static void nfe_int_task(void *, int);
static void *nfe_jalloc(struct nfe_softc *);
static void nfe_jfree(void *, void *);
static __inline void nfe_discard_rxbuf(struct nfe_softc *, int);
static __inline void nfe_discard_jrxbuf(struct nfe_softc *, int);
static int nfe_newbuf(struct nfe_softc *, int);
static int nfe_jnewbuf(struct nfe_softc *, int);
static int nfe_rxeof(struct nfe_softc *, int);
static int nfe_jrxeof(struct nfe_softc *, int);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static void nfe_txeof(struct nfe_softc *);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static struct mbuf *nfe_defrag(struct mbuf *, int, int);
static int nfe_encap(struct nfe_softc *, struct mbuf **);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static void nfe_setmulti(struct nfe_softc *);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void nfe_tx_task(void *, int);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static void nfe_start(struct ifnet *);
static void nfe_watchdog(struct ifnet *);
static void nfe_init(void *);
static void nfe_init_locked(void *);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void nfe_stop(struct ifnet *);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static int nfe_alloc_rx_ring(struct nfe_softc *, struct nfe_rx_ring *);
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
static void nfe_alloc_jrx_ring(struct nfe_softc *, struct nfe_jrx_ring *);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static int nfe_init_rx_ring(struct nfe_softc *, struct nfe_rx_ring *);
static int nfe_init_jrx_ring(struct nfe_softc *, struct nfe_jrx_ring *);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static void nfe_free_rx_ring(struct nfe_softc *, struct nfe_rx_ring *);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void nfe_free_jrx_ring(struct nfe_softc *, struct nfe_jrx_ring *);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static int nfe_alloc_tx_ring(struct nfe_softc *, struct nfe_tx_ring *);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void nfe_init_tx_ring(struct nfe_softc *, struct nfe_tx_ring *);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static void nfe_free_tx_ring(struct nfe_softc *, struct nfe_tx_ring *);
static int nfe_ifmedia_upd(struct ifnet *);
static void nfe_ifmedia_sts(struct ifnet *, struct ifmediareq *);
static void nfe_tick(void *);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void nfe_get_macaddr(struct nfe_softc *, uint8_t *);
static void nfe_set_macaddr(struct nfe_softc *, uint8_t *);
static void nfe_dma_map_segs(void *, bus_dma_segment_t *, int, int);
static int sysctl_int_range(SYSCTL_HANDLER_ARGS, int, int);
static int sysctl_hw_nfe_proc_limit(SYSCTL_HANDLER_ARGS);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#ifdef NFE_DEBUG
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static int nfedebug = 0;
#define DPRINTF(sc, ...) do { \
if (nfedebug) \
device_printf((sc)->nfe_dev, __VA_ARGS__); \
} while (0)
#define DPRINTFN(sc, n, ...) do { \
if (nfedebug >= (n)) \
device_printf((sc)->nfe_dev, __VA_ARGS__); \
} while (0)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#else
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
#define DPRINTF(sc, ...)
#define DPRINTFN(sc, n, ...)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#endif
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#define NFE_LOCK(_sc) mtx_lock(&(_sc)->nfe_mtx)
#define NFE_UNLOCK(_sc) mtx_unlock(&(_sc)->nfe_mtx)
#define NFE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->nfe_mtx, MA_OWNED)
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
#define NFE_JLIST_LOCK(_sc) mtx_lock(&(_sc)->nfe_jlist_mtx)
#define NFE_JLIST_UNLOCK(_sc) mtx_unlock(&(_sc)->nfe_jlist_mtx)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/* Tunables. */
static int msi_disable = 0;
static int msix_disable = 0;
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
static int jumbo_disable = 0;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
TUNABLE_INT("hw.nfe.msi_disable", &msi_disable);
TUNABLE_INT("hw.nfe.msix_disable", &msix_disable);
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
TUNABLE_INT("hw.nfe.jumbo_disable", &jumbo_disable);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static device_method_t nfe_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, nfe_probe),
DEVMETHOD(device_attach, nfe_attach),
DEVMETHOD(device_detach, nfe_detach),
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
DEVMETHOD(device_suspend, nfe_suspend),
DEVMETHOD(device_resume, nfe_resume),
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
DEVMETHOD(device_shutdown, nfe_shutdown),
/* bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
/* MII interface */
DEVMETHOD(miibus_readreg, nfe_miibus_readreg),
DEVMETHOD(miibus_writereg, nfe_miibus_writereg),
style(9) cleanup.
2006-10-19 10:01:26 +00:00
DEVMETHOD(miibus_statchg, nfe_miibus_statchg),
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
{ NULL, NULL }
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
};
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static driver_t nfe_driver = {
"nfe",
nfe_methods,
sizeof(struct nfe_softc)
};
static devclass_t nfe_devclass;
DRIVER_MODULE(nfe, pci, nfe_driver, nfe_devclass, 0, 0);
DRIVER_MODULE(miibus, nfe, miibus_driver, miibus_devclass, 0, 0);
static struct nfe_type nfe_devs[] = {
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE_LAN,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE2_LAN,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce2 MCP2 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE2_400_LAN1,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce2 400 MCP4 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE2_400_LAN2,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce2 400 MCP5 Networking Adapter"},
Try to be more precise in identifying the various nForce networking adapters.
2006-10-16 16:36:29 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE3_LAN1,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce3 MCP3 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE3_250_LAN,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce3 250 MCP6 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE3_LAN4,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce3 MCP7 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE4_LAN1,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce4 CK804 MCP8 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE4_LAN2,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce4 CK804 MCP9 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP04_LAN1,
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
"NVIDIA nForce MCP04 Networking Adapter"}, /* MCP10 */
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP04_LAN2,
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
"NVIDIA nForce MCP04 Networking Adapter"}, /* MCP11 */
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE430_LAN1,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce 430 MCP12 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_NFORCE430_LAN2,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce 430 MCP13 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP55_LAN1,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP55 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP55_LAN2,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP55 Networking Adapter"},
Add support for MCP61 and MCP65 adaptors. Submitted by: Peer Chen at nVIDIA
2006-09-11 07:31:55 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP61_LAN1,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP61 Networking Adapter"},
Add support for MCP61 and MCP65 adaptors. Submitted by: Peer Chen at nVIDIA
2006-09-11 07:31:55 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP61_LAN2,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP61 Networking Adapter"},
Add support for MCP61 and MCP65 adaptors. Submitted by: Peer Chen at nVIDIA
2006-09-11 07:31:55 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP61_LAN3,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP61 Networking Adapter"},
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP61_LAN4,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP61 Networking Adapter"},
Add support for MCP61 and MCP65 adaptors. Submitted by: Peer Chen at nVIDIA
2006-09-11 07:31:55 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP65_LAN1,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP65 Networking Adapter"},
Add support for MCP61 and MCP65 adaptors. Submitted by: Peer Chen at nVIDIA
2006-09-11 07:31:55 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP65_LAN2,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP65 Networking Adapter"},
Add support for MCP61 and MCP65 adaptors. Submitted by: Peer Chen at nVIDIA
2006-09-11 07:31:55 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP65_LAN3,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP65 Networking Adapter"},
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP65_LAN4,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
"NVIDIA nForce MCP65 Networking Adapter"},
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP67_LAN1,
"NVIDIA nForce MCP67 Networking Adapter"},
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP67_LAN2,
"NVIDIA nForce MCP67 Networking Adapter"},
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP67_LAN3,
"NVIDIA nForce MCP67 Networking Adapter"},
{PCI_VENDOR_NVIDIA, PCI_PRODUCT_NVIDIA_MCP67_LAN4,
"NVIDIA nForce MCP67 Networking Adapter"},
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{0, 0, NULL}
};
/* Probe for supported hardware ID's */
static int
nfe_probe(device_t dev)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_type *t;
t = nfe_devs;
/* Check for matching PCI DEVICE ID's */
while (t->name != NULL) {
if ((pci_get_vendor(dev) == t->vid_id) &&
(pci_get_device(dev) == t->dev_id)) {
device_set_desc(dev, t->name);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (BUS_PROBE_DEFAULT);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
t++;
}
return (ENXIO);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void
nfe_alloc_msix(struct nfe_softc *sc, int count)
{
int rid;
rid = PCIR_BAR(2);
sc->nfe_msix_res = bus_alloc_resource_any(sc->nfe_dev, SYS_RES_MEMORY,
&rid, RF_ACTIVE);
if (sc->nfe_msix_res == NULL) {
device_printf(sc->nfe_dev,
"couldn't allocate MSIX table resource\n");
return;
}
rid = PCIR_BAR(3);
sc->nfe_msix_pba_res = bus_alloc_resource_any(sc->nfe_dev,
SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (sc->nfe_msix_pba_res == NULL) {
device_printf(sc->nfe_dev,
"couldn't allocate MSIX PBA resource\n");
bus_release_resource(sc->nfe_dev, SYS_RES_MEMORY, PCIR_BAR(2),
sc->nfe_msix_res);
sc->nfe_msix_res = NULL;
return;
}
if (pci_alloc_msix(sc->nfe_dev, &count) == 0) {
if (count == NFE_MSI_MESSAGES) {
if (bootverbose)
device_printf(sc->nfe_dev,
"Using %d MSIX messages\n", count);
sc->nfe_msix = 1;
} else {
if (bootverbose)
device_printf(sc->nfe_dev,
"couldn't allocate MSIX\n");
pci_release_msi(sc->nfe_dev);
bus_release_resource(sc->nfe_dev, SYS_RES_MEMORY,
PCIR_BAR(3), sc->nfe_msix_pba_res);
bus_release_resource(sc->nfe_dev, SYS_RES_MEMORY,
PCIR_BAR(2), sc->nfe_msix_res);
sc->nfe_msix_pba_res = NULL;
sc->nfe_msix_res = NULL;
}
}
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static int
nfe_attach(device_t dev)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_softc *sc;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
struct ifnet *ifp;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
bus_addr_t dma_addr_max;
int error = 0, i, msic, reg, rid;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
sc = device_get_softc(dev);
sc->nfe_dev = dev;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
mtx_init(&sc->nfe_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
MTX_DEF);
mtx_init(&sc->nfe_jlist_mtx, "nfe_jlist_mtx", NULL, MTX_DEF);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
callout_init_mtx(&sc->nfe_stat_ch, &sc->nfe_mtx, 0);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
TASK_INIT(&sc->nfe_link_task, 0, nfe_link_task, sc);
SLIST_INIT(&sc->nfe_jfree_listhead);
SLIST_INIT(&sc->nfe_jinuse_listhead);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
pci_enable_busmaster(dev);
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
rid = PCIR_BAR(0);
sc->nfe_res[0] = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (sc->nfe_res[0] == NULL) {
device_printf(dev, "couldn't map memory resources\n");
mtx_destroy(&sc->nfe_mtx);
return (ENXIO);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (pci_find_extcap(dev, PCIY_EXPRESS, &reg) == 0) {
uint16_t v, width;
v = pci_read_config(dev, reg + 0x08, 2);
/* Change max. read request size to 4096. */
v &= ~(7 << 12);
v |= (5 << 12);
pci_write_config(dev, reg + 0x08, v, 2);
v = pci_read_config(dev, reg + 0x0c, 2);
/* link capability */
v = (v >> 4) & 0x0f;
width = pci_read_config(dev, reg + 0x12, 2);
/* negotiated link width */
width = (width >> 4) & 0x3f;
if (v != width)
device_printf(sc->nfe_dev,
"warning, negotiated width of link(x%d) != "
"max. width of link(x%d)\n", width, v);
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* Allocate interrupt */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (msix_disable == 0 || msi_disable == 0) {
if (msix_disable == 0 &&
(msic = pci_msix_count(dev)) == NFE_MSI_MESSAGES)
nfe_alloc_msix(sc, msic);
if (msi_disable == 0 && sc->nfe_msix == 0 &&
(msic = pci_msi_count(dev)) == NFE_MSI_MESSAGES &&
pci_alloc_msi(dev, &msic) == 0) {
if (msic == NFE_MSI_MESSAGES) {
if (bootverbose)
device_printf(dev,
"Using %d MSI messages\n", msic);
sc->nfe_msi = 1;
} else
pci_release_msi(dev);
}
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_msix == 0 && sc->nfe_msi == 0) {
rid = 0;
sc->nfe_irq[0] = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->nfe_irq[0] == NULL) {
device_printf(dev, "couldn't allocate IRQ resources\n");
error = ENXIO;
goto fail;
}
} else {
for (i = 0, rid = 1; i < NFE_MSI_MESSAGES; i++, rid++) {
sc->nfe_irq[i] = bus_alloc_resource_any(dev,
SYS_RES_IRQ, &rid, RF_ACTIVE);
if (sc->nfe_irq[i] == NULL) {
device_printf(dev,
"couldn't allocate IRQ resources for "
"message %d\n", rid);
error = ENXIO;
goto fail;
}
}
/* Map interrupts to vector 0. */
if (sc->nfe_msix != 0) {
NFE_WRITE(sc, NFE_MSIX_MAP0, 0);
NFE_WRITE(sc, NFE_MSIX_MAP1, 0);
} else if (sc->nfe_msi != 0) {
NFE_WRITE(sc, NFE_MSI_MAP0, 0);
NFE_WRITE(sc, NFE_MSI_MAP1, 0);
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/* Set IRQ status/mask register. */
sc->nfe_irq_status = NFE_IRQ_STATUS;
sc->nfe_irq_mask = NFE_IRQ_MASK;
sc->nfe_intrs = NFE_IRQ_WANTED;
sc->nfe_nointrs = 0;
if (sc->nfe_msix != 0) {
sc->nfe_irq_status = NFE_MSIX_IRQ_STATUS;
sc->nfe_nointrs = NFE_IRQ_WANTED;
} else if (sc->nfe_msi != 0) {
sc->nfe_irq_mask = NFE_MSI_IRQ_MASK;
sc->nfe_intrs = NFE_MSI_VECTOR_0_ENABLED;
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc->nfe_devid = pci_get_device(dev);
sc->nfe_revid = pci_get_revid(dev);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
sc->nfe_flags = 0;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
switch (sc->nfe_devid) {
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
case PCI_PRODUCT_NVIDIA_NFORCE3_LAN2:
case PCI_PRODUCT_NVIDIA_NFORCE3_LAN3:
case PCI_PRODUCT_NVIDIA_NFORCE3_LAN4:
case PCI_PRODUCT_NVIDIA_NFORCE3_LAN5:
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
sc->nfe_flags |= NFE_JUMBO_SUP | NFE_HW_CSUM;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
break;
case PCI_PRODUCT_NVIDIA_MCP51_LAN1:
case PCI_PRODUCT_NVIDIA_MCP51_LAN2:
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc->nfe_flags |= NFE_40BIT_ADDR | NFE_PWR_MGMT;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
break;
case PCI_PRODUCT_NVIDIA_CK804_LAN1:
case PCI_PRODUCT_NVIDIA_CK804_LAN2:
case PCI_PRODUCT_NVIDIA_MCP04_LAN1:
case PCI_PRODUCT_NVIDIA_MCP04_LAN2:
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
sc->nfe_flags |= NFE_JUMBO_SUP | NFE_40BIT_ADDR | NFE_HW_CSUM;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
break;
case PCI_PRODUCT_NVIDIA_MCP55_LAN1:
case PCI_PRODUCT_NVIDIA_MCP55_LAN2:
style(9) cleanup.
2006-10-19 10:01:26 +00:00
sc->nfe_flags |= NFE_JUMBO_SUP | NFE_40BIT_ADDR | NFE_HW_CSUM |
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_HW_VLAN | NFE_PWR_MGMT | NFE_TX_FLOW_CTRL;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
break;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
Add support for MCP61 and MCP65 adaptors. Submitted by: Peer Chen at nVIDIA
2006-09-11 07:31:55 +00:00
case PCI_PRODUCT_NVIDIA_MCP61_LAN1:
case PCI_PRODUCT_NVIDIA_MCP61_LAN2:
case PCI_PRODUCT_NVIDIA_MCP61_LAN3:
case PCI_PRODUCT_NVIDIA_MCP61_LAN4:
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
case PCI_PRODUCT_NVIDIA_MCP67_LAN1:
case PCI_PRODUCT_NVIDIA_MCP67_LAN2:
case PCI_PRODUCT_NVIDIA_MCP67_LAN3:
case PCI_PRODUCT_NVIDIA_MCP67_LAN4:
sc->nfe_flags |= NFE_40BIT_ADDR | NFE_PWR_MGMT |
Apparently some NVIDIA NICs store ethernet address in reverse order while other variants have inorder ethernet address for the same chipset. Override ethernet address ordering if we already know how it was stored. This fixes the use of inversed ethernet address on MCP67. Submitted by: ariff MFC after: 3 days
2007-11-06 01:01:38 +00:00
NFE_CORRECT_MACADDR | NFE_TX_FLOW_CTRL;
Add support for MCP61 and MCP65 adaptors. Submitted by: Peer Chen at nVIDIA
2006-09-11 07:31:55 +00:00
break;
case PCI_PRODUCT_NVIDIA_MCP65_LAN1:
case PCI_PRODUCT_NVIDIA_MCP65_LAN2:
case PCI_PRODUCT_NVIDIA_MCP65_LAN3:
case PCI_PRODUCT_NVIDIA_MCP65_LAN4:
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc->nfe_flags |= NFE_JUMBO_SUP | NFE_40BIT_ADDR |
Apparently some NVIDIA NICs store ethernet address in reverse order while other variants have inorder ethernet address for the same chipset. Override ethernet address ordering if we already know how it was stored. This fixes the use of inversed ethernet address on MCP67. Submitted by: ariff MFC after: 3 days
2007-11-06 01:01:38 +00:00
NFE_PWR_MGMT | NFE_CORRECT_MACADDR | NFE_TX_FLOW_CTRL;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
break;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_power(sc);
/* Check for reversed ethernet address */
if ((NFE_READ(sc, NFE_TX_UNK) & NFE_MAC_ADDR_INORDER) != 0)
sc->nfe_flags |= NFE_CORRECT_MACADDR;
nfe_get_macaddr(sc, sc->eaddr);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/*
* Allocate the parent bus DMA tag appropriate for PCI.
*/
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
dma_addr_max = BUS_SPACE_MAXADDR_32BIT;
if ((sc->nfe_flags & NFE_40BIT_ADDR) != 0)
dma_addr_max = NFE_DMA_MAXADDR;
error = bus_dma_tag_create(
bus_get_dma_tag(sc->nfe_dev), /* parent */
style(9) cleanup.
2006-10-19 10:01:26 +00:00
1, 0, /* alignment, boundary */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
dma_addr_max, /* lowaddr */
style(9) cleanup.
2006-10-19 10:01:26 +00:00
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
BUS_SPACE_MAXSIZE_32BIT, 0, /* maxsize, nsegments */
style(9) cleanup.
2006-10-19 10:01:26 +00:00
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
0, /* flags */
style(9) cleanup.
2006-10-19 10:01:26 +00:00
NULL, NULL, /* lockfunc, lockarg */
&sc->nfe_parent_tag);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error)
goto fail;
Fix the jumbo frame support. Submitted by: Peer Chen at nVIDIA (reworked by me)
2006-11-27 00:16:47 +00:00
ifp = sc->nfe_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(dev, "can not if_alloc()\n");
Fix the jumbo frame support. Submitted by: Peer Chen at nVIDIA (reworked by me)
2006-11-27 00:16:47 +00:00
error = ENOSPC;
goto fail;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
TASK_INIT(&sc->nfe_tx_task, 1, nfe_tx_task, ifp);
Fix the jumbo frame support. Submitted by: Peer Chen at nVIDIA (reworked by me)
2006-11-27 00:16:47 +00:00
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
/*
* Allocate Tx and Rx rings.
*/
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((error = nfe_alloc_tx_ring(sc, &sc->txq)) != 0)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
goto fail;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((error = nfe_alloc_rx_ring(sc, &sc->rxq)) != 0)
goto fail;
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
nfe_alloc_jrx_ring(sc, &sc->jrxq);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "process_limit", CTLTYPE_INT | CTLFLAG_RW,
&sc->nfe_process_limit, 0, sysctl_hw_nfe_proc_limit, "I",
"max number of Rx events to process");
sc->nfe_process_limit = NFE_PROC_DEFAULT;
error = resource_int_value(device_get_name(dev), device_get_unit(dev),
"process_limit", &sc->nfe_process_limit);
if (error == 0) {
if (sc->nfe_process_limit < NFE_PROC_MIN ||
sc->nfe_process_limit > NFE_PROC_MAX) {
device_printf(dev, "process_limit value out of range; "
"using default: %d\n", NFE_PROC_DEFAULT);
sc->nfe_process_limit = NFE_PROC_DEFAULT;
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
ifp->if_softc = sc;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ifp->if_mtu = ETHERMTU;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = nfe_ioctl;
ifp->if_start = nfe_start;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ifp->if_hwassist = 0;
ifp->if_capabilities = 0;
ifp->if_watchdog = NULL;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
ifp->if_init = nfe_init;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
IFQ_SET_MAXLEN(&ifp->if_snd, NFE_TX_RING_COUNT - 1);
ifp->if_snd.ifq_drv_maxlen = NFE_TX_RING_COUNT - 1;
IFQ_SET_READY(&ifp->if_snd);
Fix the jumbo frame support. Submitted by: Peer Chen at nVIDIA (reworked by me)
2006-11-27 00:16:47 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_flags & NFE_HW_CSUM) {
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_TSO4;
ifp->if_hwassist |= NFE_CSUM_FEATURES | CSUM_TSO;
}
ifp->if_capenable = ifp->if_capabilities;
Fix the jumbo frame support. Submitted by: Peer Chen at nVIDIA (reworked by me)
2006-11-27 00:16:47 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc->nfe_framesize = ifp->if_mtu + NFE_RX_HEADERS;
/* VLAN capability setup. */
ifp->if_capabilities |= IFCAP_VLAN_MTU;
if ((sc->nfe_flags & NFE_HW_VLAN) != 0) {
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((ifp->if_capabilities & IFCAP_HWCSUM) != 0)
ifp->if_capabilities |= IFCAP_VLAN_HWCSUM;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp->if_capenable = ifp->if_capabilities;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/*
* Tell the upper layer(s) we support long frames.
* Must appear after the call to ether_ifattach() because
* ether_ifattach() sets ifi_hdrlen to the default value.
*/
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#ifdef DEVICE_POLLING
ifp->if_capabilities |= IFCAP_POLLING;
#endif
/* Do MII setup */
style(9) cleanup.
2006-10-19 10:01:26 +00:00
if (mii_phy_probe(dev, &sc->nfe_miibus, nfe_ifmedia_upd,
nfe_ifmedia_sts)) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(dev, "MII without any phy!\n");
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
error = ENXIO;
goto fail;
}
ether_ifattach(ifp, sc->eaddr);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
TASK_INIT(&sc->nfe_int_task, 0, nfe_int_task, sc);
sc->nfe_tq = taskqueue_create_fast("nfe_taskq", M_WAITOK,
taskqueue_thread_enqueue, &sc->nfe_tq);
taskqueue_start_threads(&sc->nfe_tq, 1, PI_NET, "%s taskq",
device_get_nameunit(sc->nfe_dev));
error = 0;
if (sc->nfe_msi == 0 && sc->nfe_msix == 0) {
error = bus_setup_intr(dev, sc->nfe_irq[0],
INTR_TYPE_NET | INTR_MPSAFE, nfe_intr, NULL, sc,
&sc->nfe_intrhand[0]);
} else {
for (i = 0; i < NFE_MSI_MESSAGES; i++) {
error = bus_setup_intr(dev, sc->nfe_irq[i],
INTR_TYPE_NET | INTR_MPSAFE, nfe_intr, NULL, sc,
&sc->nfe_intrhand[i]);
if (error != 0)
break;
}
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(dev, "couldn't set up irq\n");
taskqueue_free(sc->nfe_tq);
sc->nfe_tq = NULL;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ether_ifdetach(ifp);
goto fail;
}
fail:
if (error)
nfe_detach(dev);
return (error);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static int
nfe_detach(device_t dev)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
style(9) cleanup.
2006-10-19 10:01:26 +00:00
struct nfe_softc *sc;
struct ifnet *ifp;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
uint8_t eaddr[ETHER_ADDR_LEN];
int i, rid;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
sc = device_get_softc(dev);
KASSERT(mtx_initialized(&sc->nfe_mtx), ("nfe mutex not initialized"));
ifp = sc->nfe_ifp;
#ifdef DEVICE_POLLING
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (ifp != NULL && ifp->if_capenable & IFCAP_POLLING)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ether_poll_deregister(ifp);
#endif
if (device_is_attached(dev)) {
Grrr. new .vimrc file is really giving me trouble.. get the whitespace right.
2006-11-27 00:10:00 +00:00
NFE_LOCK(sc);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_stop(ifp);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp->if_flags &= ~IFF_UP;
Grrr. new .vimrc file is really giving me trouble.. get the whitespace right.
2006-11-27 00:10:00 +00:00
NFE_UNLOCK(sc);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
callout_drain(&sc->nfe_stat_ch);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
taskqueue_drain(taskqueue_fast, &sc->nfe_tx_task);
taskqueue_drain(taskqueue_swi, &sc->nfe_link_task);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ether_ifdetach(ifp);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (ifp) {
/* restore ethernet address */
if ((sc->nfe_flags & NFE_CORRECT_MACADDR) == 0) {
for (i = 0; i < ETHER_ADDR_LEN; i++) {
eaddr[i] = sc->eaddr[5 - i];
}
} else
bcopy(sc->eaddr, eaddr, ETHER_ADDR_LEN);
nfe_set_macaddr(sc, eaddr);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if_free(ifp);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (sc->nfe_miibus)
device_delete_child(dev, sc->nfe_miibus);
bus_generic_detach(dev);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_tq != NULL) {
taskqueue_drain(sc->nfe_tq, &sc->nfe_int_task);
taskqueue_free(sc->nfe_tq);
sc->nfe_tq = NULL;
}
for (i = 0; i < NFE_MSI_MESSAGES; i++) {
if (sc->nfe_intrhand[i] != NULL) {
bus_teardown_intr(dev, sc->nfe_irq[i],
sc->nfe_intrhand[i]);
sc->nfe_intrhand[i] = NULL;
}
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_msi == 0 && sc->nfe_msix == 0) {
if (sc->nfe_irq[0] != NULL)
bus_release_resource(dev, SYS_RES_IRQ, 0,
sc->nfe_irq[0]);
} else {
for (i = 0, rid = 1; i < NFE_MSI_MESSAGES; i++, rid++) {
if (sc->nfe_irq[i] != NULL) {
bus_release_resource(dev, SYS_RES_IRQ, rid,
sc->nfe_irq[i]);
sc->nfe_irq[i] = NULL;
}
}
pci_release_msi(dev);
}
if (sc->nfe_msix_pba_res != NULL) {
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BAR(3),
sc->nfe_msix_pba_res);
sc->nfe_msix_pba_res = NULL;
}
if (sc->nfe_msix_res != NULL) {
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BAR(2),
sc->nfe_msix_res);
sc->nfe_msix_res = NULL;
}
if (sc->nfe_res[0] != NULL) {
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BAR(0),
sc->nfe_res[0]);
sc->nfe_res[0] = NULL;
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
nfe_free_tx_ring(sc, &sc->txq);
nfe_free_rx_ring(sc, &sc->rxq);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_free_jrx_ring(sc, &sc->jrxq);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_parent_tag) {
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
bus_dma_tag_destroy(sc->nfe_parent_tag);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc->nfe_parent_tag = NULL;
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
mtx_destroy(&sc->nfe_jlist_mtx);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
mtx_destroy(&sc->nfe_mtx);
return (0);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static int
nfe_suspend(device_t dev)
{
struct nfe_softc *sc;
sc = device_get_softc(dev);
NFE_LOCK(sc);
nfe_stop(sc->nfe_ifp);
sc->nfe_suspended = 1;
NFE_UNLOCK(sc);
return (0);
}
static int
nfe_resume(device_t dev)
{
struct nfe_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
NFE_LOCK(sc);
ifp = sc->nfe_ifp;
if (ifp->if_flags & IFF_UP)
nfe_init_locked(sc);
sc->nfe_suspended = 0;
NFE_UNLOCK(sc);
return (0);
}
/* Take PHY/NIC out of powerdown, from Linux */
static void
nfe_power(struct nfe_softc *sc)
{
uint32_t pwr;
if ((sc->nfe_flags & NFE_PWR_MGMT) == 0)
return;
NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_RESET | NFE_RXTX_BIT2);
NFE_WRITE(sc, NFE_MAC_RESET, NFE_MAC_RESET_MAGIC);
DELAY(100);
NFE_WRITE(sc, NFE_MAC_RESET, 0);
DELAY(100);
NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_BIT2);
pwr = NFE_READ(sc, NFE_PWR2_CTL);
pwr &= ~NFE_PWR2_WAKEUP_MASK;
if (sc->nfe_revid >= 0xa3 &&
(sc->nfe_devid == PCI_PRODUCT_NVIDIA_NFORCE430_LAN1 ||
sc->nfe_devid == PCI_PRODUCT_NVIDIA_NFORCE430_LAN2))
pwr |= NFE_PWR2_REVA3;
NFE_WRITE(sc, NFE_PWR2_CTL, pwr);
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static void
nfe_miibus_statchg(device_t dev)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_softc *sc;
sc = device_get_softc(dev);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
taskqueue_enqueue(taskqueue_swi, &sc->nfe_link_task);
}
static void
nfe_link_task(void *arg, int pending)
{
struct nfe_softc *sc;
struct mii_data *mii;
struct ifnet *ifp;
uint32_t phy, seed, misc = NFE_MISC1_MAGIC, link = NFE_MEDIA_SET;
uint32_t gmask, rxctl, txctl, val;
sc = (struct nfe_softc *)arg;
NFE_LOCK(sc);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
mii = device_get_softc(sc->nfe_miibus);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ifp = sc->nfe_ifp;
if (mii == NULL || ifp == NULL) {
NFE_UNLOCK(sc);
return;
}
if (mii->mii_media_status & IFM_ACTIVE) {
if (IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE)
sc->nfe_link = 1;
} else
sc->nfe_link = 0;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
phy = NFE_READ(sc, NFE_PHY_IFACE);
phy &= ~(NFE_PHY_HDX | NFE_PHY_100TX | NFE_PHY_1000T);
seed = NFE_READ(sc, NFE_RNDSEED);
seed &= ~NFE_SEED_MASK;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (((mii->mii_media_active & IFM_GMASK) & IFM_FDX) == 0) {
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
phy |= NFE_PHY_HDX; /* half-duplex */
misc |= NFE_MISC1_HDX;
}
switch (IFM_SUBTYPE(mii->mii_media_active)) {
case IFM_1000_T: /* full-duplex only */
link |= NFE_MEDIA_1000T;
seed |= NFE_SEED_1000T;
phy |= NFE_PHY_1000T;
break;
case IFM_100_TX:
link |= NFE_MEDIA_100TX;
seed |= NFE_SEED_100TX;
phy |= NFE_PHY_100TX;
break;
case IFM_10_T:
link |= NFE_MEDIA_10T;
seed |= NFE_SEED_10T;
break;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((phy & 0x10000000) != 0) {
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T)
val = NFE_R1_MAGIC_1000;
else
val = NFE_R1_MAGIC_10_100;
} else
val = NFE_R1_MAGIC_DEFAULT;
NFE_WRITE(sc, NFE_SETUP_R1, val);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
NFE_WRITE(sc, NFE_RNDSEED, seed); /* XXX: gigabit NICs only? */
NFE_WRITE(sc, NFE_PHY_IFACE, phy);
NFE_WRITE(sc, NFE_MISC1, misc);
NFE_WRITE(sc, NFE_LINKSPEED, link);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
gmask = mii->mii_media_active & IFM_GMASK;
if ((gmask & IFM_FDX) != 0) {
/* It seems all hardwares supports Rx pause frames. */
val = NFE_READ(sc, NFE_RXFILTER);
if ((gmask & IFM_FLAG0) != 0)
val |= NFE_PFF_RX_PAUSE;
else
val &= ~NFE_PFF_RX_PAUSE;
NFE_WRITE(sc, NFE_RXFILTER, val);
if ((sc->nfe_flags & NFE_TX_FLOW_CTRL) != 0) {
val = NFE_READ(sc, NFE_MISC1);
if ((gmask & IFM_FLAG1) != 0) {
NFE_WRITE(sc, NFE_TX_PAUSE_FRAME,
NFE_TX_PAUSE_FRAME_ENABLE);
val |= NFE_MISC1_TX_PAUSE;
} else {
val &= ~NFE_MISC1_TX_PAUSE;
NFE_WRITE(sc, NFE_TX_PAUSE_FRAME,
NFE_TX_PAUSE_FRAME_DISABLE);
}
NFE_WRITE(sc, NFE_MISC1, val);
}
} else {
/* disable rx/tx pause frames */
val = NFE_READ(sc, NFE_RXFILTER);
val &= ~NFE_PFF_RX_PAUSE;
NFE_WRITE(sc, NFE_RXFILTER, val);
if ((sc->nfe_flags & NFE_TX_FLOW_CTRL) != 0) {
NFE_WRITE(sc, NFE_TX_PAUSE_FRAME,
NFE_TX_PAUSE_FRAME_DISABLE);
val = NFE_READ(sc, NFE_MISC1);
val &= ~NFE_MISC1_TX_PAUSE;
NFE_WRITE(sc, NFE_MISC1, val);
}
}
txctl = NFE_READ(sc, NFE_TX_CTL);
rxctl = NFE_READ(sc, NFE_RX_CTL);
if (sc->nfe_link != 0 && (ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
txctl |= NFE_TX_START;
rxctl |= NFE_RX_START;
} else {
txctl &= ~NFE_TX_START;
rxctl &= ~NFE_RX_START;
}
Fix typo. Pointed out: marius Approved by: re (bmah)
2007-09-14 01:28:18 +00:00
NFE_WRITE(sc, NFE_TX_CTL, txctl);
NFE_WRITE(sc, NFE_RX_CTL, rxctl);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_UNLOCK(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static int
nfe_miibus_readreg(device_t dev, int phy, int reg)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_softc *sc = device_get_softc(dev);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
uint32_t val;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
int ntries;
NFE_WRITE(sc, NFE_PHY_STATUS, 0xf);
if (NFE_READ(sc, NFE_PHY_CTL) & NFE_PHY_BUSY) {
NFE_WRITE(sc, NFE_PHY_CTL, NFE_PHY_BUSY);
DELAY(100);
}
NFE_WRITE(sc, NFE_PHY_CTL, (phy << NFE_PHYADD_SHIFT) | reg);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
for (ntries = 0; ntries < NFE_TIMEOUT; ntries++) {
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
DELAY(100);
if (!(NFE_READ(sc, NFE_PHY_CTL) & NFE_PHY_BUSY))
break;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (ntries == NFE_TIMEOUT) {
DPRINTFN(sc, 2, "timeout waiting for PHY\n");
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
return 0;
}
if (NFE_READ(sc, NFE_PHY_STATUS) & NFE_PHY_ERROR) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
DPRINTFN(sc, 2, "could not read PHY\n");
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
return 0;
}
val = NFE_READ(sc, NFE_PHY_DATA);
if (val != 0xffffffff && val != 0)
sc->mii_phyaddr = phy;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
DPRINTFN(sc, 2, "mii read phy %d reg 0x%x ret 0x%x\n", phy, reg, val);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (val);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static int
nfe_miibus_writereg(device_t dev, int phy, int reg, int val)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_softc *sc = device_get_softc(dev);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
uint32_t ctl;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
int ntries;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
NFE_WRITE(sc, NFE_PHY_STATUS, 0xf);
if (NFE_READ(sc, NFE_PHY_CTL) & NFE_PHY_BUSY) {
NFE_WRITE(sc, NFE_PHY_CTL, NFE_PHY_BUSY);
DELAY(100);
}
NFE_WRITE(sc, NFE_PHY_DATA, val);
ctl = NFE_PHY_WRITE | (phy << NFE_PHYADD_SHIFT) | reg;
NFE_WRITE(sc, NFE_PHY_CTL, ctl);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
for (ntries = 0; ntries < NFE_TIMEOUT; ntries++) {
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
DELAY(100);
if (!(NFE_READ(sc, NFE_PHY_CTL) & NFE_PHY_BUSY))
break;
}
#ifdef NFE_DEBUG
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (nfedebug >= 2 && ntries == NFE_TIMEOUT)
device_printf(sc->nfe_dev, "could not write to PHY\n");
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
#endif
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (0);
}
/*
* Allocate a jumbo buffer.
*/
static void *
nfe_jalloc(struct nfe_softc *sc)
{
struct nfe_jpool_entry *entry;
NFE_JLIST_LOCK(sc);
entry = SLIST_FIRST(&sc->nfe_jfree_listhead);
if (entry == NULL) {
NFE_JLIST_UNLOCK(sc);
return (NULL);
}
SLIST_REMOVE_HEAD(&sc->nfe_jfree_listhead, jpool_entries);
SLIST_INSERT_HEAD(&sc->nfe_jinuse_listhead, entry, jpool_entries);
NFE_JLIST_UNLOCK(sc);
return (sc->jrxq.jslots[entry->slot]);
}
/*
* Release a jumbo buffer.
*/
static void
nfe_jfree(void *buf, void *args)
{
struct nfe_softc *sc;
struct nfe_jpool_entry *entry;
int i;
/* Extract the softc struct pointer. */
sc = (struct nfe_softc *)args;
KASSERT(sc != NULL, ("%s: can't find softc pointer!", __func__));
NFE_JLIST_LOCK(sc);
/* Calculate the slot this buffer belongs to. */
i = ((vm_offset_t)buf
- (vm_offset_t)sc->jrxq.jpool) / NFE_JLEN;
KASSERT(i >= 0 && i < NFE_JSLOTS,
("%s: asked to free buffer that we don't manage!", __func__));
entry = SLIST_FIRST(&sc->nfe_jinuse_listhead);
KASSERT(entry != NULL, ("%s: buffer not in use!", __func__));
entry->slot = i;
SLIST_REMOVE_HEAD(&sc->nfe_jinuse_listhead, jpool_entries);
SLIST_INSERT_HEAD(&sc->nfe_jfree_listhead, entry, jpool_entries);
if (SLIST_EMPTY(&sc->nfe_jinuse_listhead))
wakeup(sc);
NFE_JLIST_UNLOCK(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_dmamap_arg {
bus_addr_t nfe_busaddr;
};
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static int
nfe_alloc_rx_ring(struct nfe_softc *sc, struct nfe_rx_ring *ring)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_dmamap_arg ctx;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_rx_data *data;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
void *desc;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
int i, error, descsize;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (sc->nfe_flags & NFE_40BIT_ADDR) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc = ring->desc64;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
descsize = sizeof (struct nfe_desc64);
} else {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc = ring->desc32;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
descsize = sizeof (struct nfe_desc32);
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ring->cur = ring->next = 0;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
style(9) cleanup.
2006-10-19 10:01:26 +00:00
error = bus_dma_tag_create(sc->nfe_parent_tag,
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_RING_ALIGN, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
NFE_RX_RING_COUNT * descsize, 1, /* maxsize, nsegments */
NFE_RX_RING_COUNT * descsize, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&ring->rx_desc_tag);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev, "could not create desc DMA tag\n");
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
goto fail;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* allocate memory to desc */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
error = bus_dmamem_alloc(ring->rx_desc_tag, &desc, BUS_DMA_WAITOK |
BUS_DMA_COHERENT | BUS_DMA_ZERO, &ring->rx_desc_map);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev, "could not create desc DMA map\n");
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
goto fail;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_flags & NFE_40BIT_ADDR)
ring->desc64 = desc;
else
ring->desc32 = desc;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* map desc to device visible address space */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ctx.nfe_busaddr = 0;
error = bus_dmamap_load(ring->rx_desc_tag, ring->rx_desc_map, desc,
NFE_RX_RING_COUNT * descsize, nfe_dma_map_segs, &ctx, 0);
if (error != 0) {
device_printf(sc->nfe_dev, "could not load desc DMA map\n");
goto fail;
}
ring->physaddr = ctx.nfe_busaddr;
error = bus_dma_tag_create(sc->nfe_parent_tag,
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MCLBYTES, 1, /* maxsize, nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&ring->rx_data_tag);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev, "could not create Rx DMA tag\n");
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
goto fail;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
error = bus_dmamap_create(ring->rx_data_tag, 0, &ring->rx_spare_map);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not create Rx DMA spare map\n");
goto fail;
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/*
* Pre-allocate Rx buffers and populate Rx ring.
*/
for (i = 0; i < NFE_RX_RING_COUNT; i++) {
data = &sc->rxq.data[i];
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
data->rx_data_map = NULL;
data->m = NULL;
error = bus_dmamap_create(ring->rx_data_tag, 0,
Reformat to KNF after revision 1.12.
2006-11-27 00:23:59 +00:00
&data->rx_data_map);
if (error != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev,
"could not create Rx DMA map\n");
Reformat to KNF after revision 1.12.
2006-11-27 00:23:59 +00:00
goto fail;
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
fail:
return (error);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
static void
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_alloc_jrx_ring(struct nfe_softc *sc, struct nfe_jrx_ring *ring)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_dmamap_arg ctx;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_rx_data *data;
void *desc;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_jpool_entry *entry;
uint8_t *ptr;
int i, error, descsize;
if ((sc->nfe_flags & NFE_JUMBO_SUP) == 0)
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
return;
if (jumbo_disable != 0) {
device_printf(sc->nfe_dev, "disabling jumbo frame support\n");
sc->nfe_jumbo_disable = 1;
return;
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (sc->nfe_flags & NFE_40BIT_ADDR) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc = ring->jdesc64;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
descsize = sizeof (struct nfe_desc64);
} else {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc = ring->jdesc32;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
descsize = sizeof (struct nfe_desc32);
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ring->jcur = ring->jnext = 0;
/* Create DMA tag for jumbo Rx ring. */
error = bus_dma_tag_create(sc->nfe_parent_tag,
NFE_RING_ALIGN, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
NFE_JUMBO_RX_RING_COUNT * descsize, /* maxsize */
1, /* nsegments */
NFE_JUMBO_RX_RING_COUNT * descsize, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&ring->jrx_desc_tag);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not create jumbo ring DMA tag\n");
goto fail;
}
/* Create DMA tag for jumbo buffer blocks. */
error = bus_dma_tag_create(sc->nfe_parent_tag,
PAGE_SIZE, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
NFE_JMEM, /* maxsize */
1, /* nsegments */
NFE_JMEM, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&ring->jrx_jumbo_tag);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not create jumbo Rx buffer block DMA tag\n");
goto fail;
}
/* Create DMA tag for jumbo Rx buffers. */
error = bus_dma_tag_create(sc->nfe_parent_tag,
PAGE_SIZE, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
NFE_JLEN, /* maxsize */
1, /* nsegments */
NFE_JLEN, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&ring->jrx_data_tag);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not create jumbo Rx buffer DMA tag\n");
goto fail;
}
/* Allocate DMA'able memory and load the DMA map for jumbo Rx ring. */
error = bus_dmamem_alloc(ring->jrx_desc_tag, &desc, BUS_DMA_WAITOK |
BUS_DMA_COHERENT | BUS_DMA_ZERO, &ring->jrx_desc_map);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not allocate DMA'able memory for jumbo Rx ring\n");
goto fail;
}
if (sc->nfe_flags & NFE_40BIT_ADDR)
ring->jdesc64 = desc;
else
ring->jdesc32 = desc;
ctx.nfe_busaddr = 0;
error = bus_dmamap_load(ring->jrx_desc_tag, ring->jrx_desc_map, desc,
NFE_JUMBO_RX_RING_COUNT * descsize, nfe_dma_map_segs, &ctx, 0);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not load DMA'able memory for jumbo Rx ring\n");
goto fail;
}
ring->jphysaddr = ctx.nfe_busaddr;
/* Create DMA maps for jumbo Rx buffers. */
error = bus_dmamap_create(ring->jrx_data_tag, 0, &ring->jrx_spare_map);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not create jumbo Rx DMA spare map\n");
goto fail;
}
for (i = 0; i < NFE_JUMBO_RX_RING_COUNT; i++) {
data = &sc->jrxq.jdata[i];
data->rx_data_map = NULL;
data->m = NULL;
error = bus_dmamap_create(ring->jrx_data_tag, 0,
&data->rx_data_map);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not create jumbo Rx DMA map\n");
goto fail;
}
}
/* Allocate DMA'able memory and load the DMA map for jumbo buf. */
error = bus_dmamem_alloc(ring->jrx_jumbo_tag, (void **)&ring->jpool,
BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO,
&ring->jrx_jumbo_map);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not allocate DMA'able memory for jumbo pool\n");
goto fail;
}
ctx.nfe_busaddr = 0;
error = bus_dmamap_load(ring->jrx_jumbo_tag, ring->jrx_jumbo_map,
ring->jpool, NFE_JMEM, nfe_dma_map_segs, &ctx, 0);
if (error != 0) {
device_printf(sc->nfe_dev,
"could not load DMA'able memory for jumbo pool\n");
goto fail;
}
/*
* Now divide it up into 9K pieces and save the addresses
* in an array.
*/
ptr = ring->jpool;
for (i = 0; i < NFE_JSLOTS; i++) {
ring->jslots[i] = ptr;
ptr += NFE_JLEN;
entry = malloc(sizeof(struct nfe_jpool_entry), M_DEVBUF,
M_WAITOK);
if (entry == NULL) {
device_printf(sc->nfe_dev,
"no memory for jumbo buffers!\n");
error = ENOMEM;
goto fail;
}
entry->slot = i;
SLIST_INSERT_HEAD(&sc->nfe_jfree_listhead, entry,
jpool_entries);
}
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
return;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
fail:
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
/*
* Running without jumbo frame support is ok for most cases
* so don't fail on creating dma tag/map for jumbo frame.
*/
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_free_jrx_ring(sc, ring);
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
device_printf(sc->nfe_dev, "disabling jumbo frame support due to "
"resource shortage\n");
sc->nfe_jumbo_disable = 1;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
}
static int
nfe_init_rx_ring(struct nfe_softc *sc, struct nfe_rx_ring *ring)
{
void *desc;
size_t descsize;
int i;
ring->cur = ring->next = 0;
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc = ring->desc64;
descsize = sizeof (struct nfe_desc64);
} else {
desc = ring->desc32;
descsize = sizeof (struct nfe_desc32);
}
bzero(desc, descsize * NFE_RX_RING_COUNT);
for (i = 0; i < NFE_RX_RING_COUNT; i++) {
if (nfe_newbuf(sc, i) != 0)
return (ENOBUFS);
}
bus_dmamap_sync(ring->rx_desc_tag, ring->rx_desc_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
return (0);
}
static int
nfe_init_jrx_ring(struct nfe_softc *sc, struct nfe_jrx_ring *ring)
{
void *desc;
size_t descsize;
int i;
ring->jcur = ring->jnext = 0;
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc = ring->jdesc64;
descsize = sizeof (struct nfe_desc64);
} else {
desc = ring->jdesc32;
descsize = sizeof (struct nfe_desc32);
}
bzero(desc, descsize * NFE_RX_RING_COUNT);
for (i = 0; i < NFE_JUMBO_RX_RING_COUNT; i++) {
if (nfe_jnewbuf(sc, i) != 0)
return (ENOBUFS);
}
bus_dmamap_sync(ring->jrx_desc_tag, ring->jrx_desc_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
return (0);
}
static void
nfe_free_rx_ring(struct nfe_softc *sc, struct nfe_rx_ring *ring)
{
struct nfe_rx_data *data;
void *desc;
int i, descsize;
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc = ring->desc64;
descsize = sizeof (struct nfe_desc64);
} else {
desc = ring->desc32;
descsize = sizeof (struct nfe_desc32);
}
for (i = 0; i < NFE_RX_RING_COUNT; i++) {
data = &ring->data[i];
if (data->rx_data_map != NULL) {
bus_dmamap_destroy(ring->rx_data_tag,
data->rx_data_map);
data->rx_data_map = NULL;
}
if (data->m != NULL) {
m_freem(data->m);
data->m = NULL;
}
}
if (ring->rx_data_tag != NULL) {
if (ring->rx_spare_map != NULL) {
bus_dmamap_destroy(ring->rx_data_tag,
ring->rx_spare_map);
ring->rx_spare_map = NULL;
}
bus_dma_tag_destroy(ring->rx_data_tag);
ring->rx_data_tag = NULL;
}
if (desc != NULL) {
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
bus_dmamap_unload(ring->rx_desc_tag, ring->rx_desc_map);
bus_dmamem_free(ring->rx_desc_tag, desc, ring->rx_desc_map);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ring->desc64 = NULL;
ring->desc32 = NULL;
ring->rx_desc_map = NULL;
}
if (ring->rx_desc_tag != NULL) {
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
bus_dma_tag_destroy(ring->rx_desc_tag);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ring->rx_desc_tag = NULL;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Fix the jumbo frame support. Submitted by: Peer Chen at nVIDIA (reworked by me)
2006-11-27 00:16:47 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void
nfe_free_jrx_ring(struct nfe_softc *sc, struct nfe_jrx_ring *ring)
{
struct nfe_jpool_entry *entry;
struct nfe_rx_data *data;
void *desc;
int i, descsize;
if ((sc->nfe_flags & NFE_JUMBO_SUP) == 0)
return;
NFE_JLIST_LOCK(sc);
while ((entry = SLIST_FIRST(&sc->nfe_jinuse_listhead))) {
device_printf(sc->nfe_dev,
"asked to free buffer that is in use!\n");
SLIST_REMOVE_HEAD(&sc->nfe_jinuse_listhead, jpool_entries);
SLIST_INSERT_HEAD(&sc->nfe_jfree_listhead, entry,
jpool_entries);
}
while (!SLIST_EMPTY(&sc->nfe_jfree_listhead)) {
entry = SLIST_FIRST(&sc->nfe_jfree_listhead);
SLIST_REMOVE_HEAD(&sc->nfe_jfree_listhead, jpool_entries);
free(entry, M_DEVBUF);
}
NFE_JLIST_UNLOCK(sc);
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc = ring->jdesc64;
descsize = sizeof (struct nfe_desc64);
} else {
desc = ring->jdesc32;
descsize = sizeof (struct nfe_desc32);
}
for (i = 0; i < NFE_JUMBO_RX_RING_COUNT; i++) {
data = &ring->jdata[i];
Reformat to KNF after revision 1.12.
2006-11-27 00:23:59 +00:00
if (data->rx_data_map != NULL) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
bus_dmamap_destroy(ring->jrx_data_tag,
Reformat to KNF after revision 1.12.
2006-11-27 00:23:59 +00:00
data->rx_data_map);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
data->rx_data_map = NULL;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (data->m != NULL) {
Reformat to KNF after revision 1.12.
2006-11-27 00:23:59 +00:00
m_freem(data->m);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
data->m = NULL;
}
}
if (ring->jrx_data_tag != NULL) {
if (ring->jrx_spare_map != NULL) {
bus_dmamap_destroy(ring->jrx_data_tag,
ring->jrx_spare_map);
ring->jrx_spare_map = NULL;
}
bus_dma_tag_destroy(ring->jrx_data_tag);
ring->jrx_data_tag = NULL;
}
if (desc != NULL) {
bus_dmamap_unload(ring->jrx_desc_tag, ring->jrx_desc_map);
bus_dmamem_free(ring->jrx_desc_tag, desc, ring->jrx_desc_map);
ring->jdesc64 = NULL;
ring->jdesc32 = NULL;
ring->jrx_desc_map = NULL;
}
/* Destroy jumbo buffer block. */
if (ring->jrx_jumbo_map != NULL)
bus_dmamap_unload(ring->jrx_jumbo_tag, ring->jrx_jumbo_map);
if (ring->jrx_jumbo_map != NULL) {
bus_dmamem_free(ring->jrx_jumbo_tag, ring->jpool,
ring->jrx_jumbo_map);
ring->jpool = NULL;
ring->jrx_jumbo_map = NULL;
}
if (ring->jrx_desc_tag != NULL) {
bus_dma_tag_destroy(ring->jrx_desc_tag);
ring->jrx_desc_tag = NULL;
Reformat to KNF after revision 1.12.
2006-11-27 00:23:59 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static int
nfe_alloc_tx_ring(struct nfe_softc *sc, struct nfe_tx_ring *ring)
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_dmamap_arg ctx;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
int i, error;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
void *desc;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
int descsize;
if (sc->nfe_flags & NFE_40BIT_ADDR) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc = ring->desc64;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
descsize = sizeof (struct nfe_desc64);
} else {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc = ring->desc32;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
descsize = sizeof (struct nfe_desc32);
}
ring->queued = 0;
ring->cur = ring->next = 0;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
error = bus_dma_tag_create(sc->nfe_parent_tag,
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_RING_ALIGN, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
NFE_TX_RING_COUNT * descsize, 1, /* maxsize, nsegments */
NFE_TX_RING_COUNT * descsize, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&ring->tx_desc_tag);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev, "could not create desc DMA tag\n");
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
goto fail;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
error = bus_dmamem_alloc(ring->tx_desc_tag, &desc, BUS_DMA_WAITOK |
BUS_DMA_COHERENT | BUS_DMA_ZERO, &ring->tx_desc_map);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev, "could not create desc DMA map\n");
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
goto fail;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_flags & NFE_40BIT_ADDR)
ring->desc64 = desc;
else
ring->desc32 = desc;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ctx.nfe_busaddr = 0;
error = bus_dmamap_load(ring->tx_desc_tag, ring->tx_desc_map, desc,
NFE_TX_RING_COUNT * descsize, nfe_dma_map_segs, &ctx, 0);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev, "could not load desc DMA map\n");
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
goto fail;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ring->physaddr = ctx.nfe_busaddr;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
style(9) cleanup.
2006-10-19 10:01:26 +00:00
error = bus_dma_tag_create(sc->nfe_parent_tag,
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
1, 0,
BUS_SPACE_MAXADDR,
BUS_SPACE_MAXADDR,
NULL, NULL,
Increase a maximum segment size of DMA to 4096. Previously it used MCLBYTES for the segment size but it used too many Tx descriptors in TSO case. While I'm here adjust maximum size of the sum of all segment lengths in a given DMA mapping to 65535, the maximum size, in bytes, of a IP packet.
2007-06-12 02:35:01 +00:00
NFE_TSO_MAXSIZE,
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_MAX_SCATTER,
Increase a maximum segment size of DMA to 4096. Previously it used MCLBYTES for the segment size but it used too many Tx descriptors in TSO case. While I'm here adjust maximum size of the sum of all segment lengths in a given DMA mapping to 65535, the maximum size, in bytes, of a IP packet.
2007-06-12 02:35:01 +00:00
NFE_TSO_MAXSGSIZE,
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
0,
NULL, NULL,
&ring->tx_data_tag);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev, "could not create Tx DMA tag\n");
goto fail;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
for (i = 0; i < NFE_TX_RING_COUNT; i++) {
style(9) cleanup.
2006-10-19 10:01:26 +00:00
error = bus_dmamap_create(ring->tx_data_tag, 0,
&ring->data[i].tx_data_map);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (error != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev,
"could not create Tx DMA map\n");
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
goto fail;
}
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
fail:
return (error);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
static void
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_init_tx_ring(struct nfe_softc *sc, struct nfe_tx_ring *ring)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
void *desc;
size_t descsize;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc->nfe_force_tx = 0;
ring->queued = 0;
ring->cur = ring->next = 0;
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc = ring->desc64;
descsize = sizeof (struct nfe_desc64);
} else {
desc = ring->desc32;
descsize = sizeof (struct nfe_desc32);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
bzero(desc, descsize * NFE_TX_RING_COUNT);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
style(9) cleanup.
2006-10-19 10:01:26 +00:00
bus_dmamap_sync(ring->tx_desc_tag, ring->tx_desc_map,
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static void
nfe_free_tx_ring(struct nfe_softc *sc, struct nfe_tx_ring *ring)
{
struct nfe_tx_data *data;
void *desc;
int i, descsize;
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc = ring->desc64;
descsize = sizeof (struct nfe_desc64);
} else {
desc = ring->desc32;
descsize = sizeof (struct nfe_desc32);
}
for (i = 0; i < NFE_TX_RING_COUNT; i++) {
data = &ring->data[i];
if (data->m != NULL) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
bus_dmamap_sync(ring->tx_data_tag, data->tx_data_map,
style(9) cleanup.
2006-10-19 10:01:26 +00:00
BUS_DMASYNC_POSTWRITE);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
bus_dmamap_unload(ring->tx_data_tag, data->tx_data_map);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
m_freem(data->m);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
data->m = NULL;
}
if (data->tx_data_map != NULL) {
bus_dmamap_destroy(ring->tx_data_tag,
data->tx_data_map);
data->tx_data_map = NULL;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (ring->tx_data_tag != NULL) {
bus_dma_tag_destroy(ring->tx_data_tag);
ring->tx_data_tag = NULL;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (desc != NULL) {
bus_dmamap_sync(ring->tx_desc_tag, ring->tx_desc_map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->tx_desc_tag, ring->tx_desc_map);
bus_dmamem_free(ring->tx_desc_tag, desc, ring->tx_desc_map);
ring->desc64 = NULL;
ring->desc32 = NULL;
ring->tx_desc_map = NULL;
bus_dma_tag_destroy(ring->tx_desc_tag);
ring->tx_desc_tag = NULL;
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
#ifdef DEVICE_POLLING
static poll_handler_t nfe_poll;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static void
nfe_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
{
Missed two nits in rev 1.7.
2006-11-17 16:49:40 +00:00
struct nfe_softc *sc = ifp->if_softc;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
uint32_t r;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_LOCK(sc);
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_UNLOCK(sc);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
return;
}
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
if (sc->nfe_framesize > MCLBYTES - ETHER_HDR_LEN)
nfe_jrxeof(sc, count);
else
nfe_rxeof(sc, count);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
nfe_txeof(sc);
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
use the private task q thread instead of the shared system thread Reviewed by: yongari MFC after: 1 week
2007-11-16 15:51:47 +00:00
taskqueue_enqueue_fast(sc->nfe_tq, &sc->nfe_tx_task);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (cmd == POLL_AND_CHECK_STATUS) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((r = NFE_READ(sc, sc->nfe_irq_status)) == 0) {
NFE_UNLOCK(sc);
style(9) cleanup.
2006-10-19 10:01:26 +00:00
return;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_WRITE(sc, sc->nfe_irq_status, r);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
style(9) cleanup.
2006-10-19 10:01:26 +00:00
if (r & NFE_IRQ_LINK) {
NFE_READ(sc, NFE_PHY_STATUS);
NFE_WRITE(sc, NFE_PHY_STATUS, 0xf);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
DPRINTF(sc, "link state changed\n");
style(9) cleanup.
2006-10-19 10:01:26 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_UNLOCK(sc);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
#endif /* DEVICE_POLLING */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static void
nfe_set_intr(struct nfe_softc *sc)
{
if (sc->nfe_msi != 0)
NFE_WRITE(sc, NFE_IRQ_MASK, NFE_IRQ_WANTED);
}
/* In MSIX, a write to mask reegisters behaves as XOR. */
static __inline void
nfe_enable_intr(struct nfe_softc *sc)
{
if (sc->nfe_msix != 0) {
/* XXX Should have a better way to enable interrupts! */
if (NFE_READ(sc, sc->nfe_irq_mask) == 0)
NFE_WRITE(sc, sc->nfe_irq_mask, sc->nfe_intrs);
} else
NFE_WRITE(sc, sc->nfe_irq_mask, sc->nfe_intrs);
}
static __inline void
nfe_disable_intr(struct nfe_softc *sc)
{
if (sc->nfe_msix != 0) {
/* XXX Should have a better way to disable interrupts! */
if (NFE_READ(sc, sc->nfe_irq_mask) != 0)
NFE_WRITE(sc, sc->nfe_irq_mask, sc->nfe_nointrs);
} else
NFE_WRITE(sc, sc->nfe_irq_mask, sc->nfe_nointrs);
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
static int
nfe_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_softc *sc;
struct ifreq *ifr;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
struct mii_data *mii;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
int error, init, mask;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc = ifp->if_softc;
ifr = (struct ifreq *) data;
error = 0;
init = 0;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
switch (cmd) {
case SIOCSIFMTU:
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > NFE_JUMBO_MTU)
Fix the jumbo frame support. Submitted by: Peer Chen at nVIDIA (reworked by me)
2006-11-27 00:16:47 +00:00
error = EINVAL;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
else if (ifp->if_mtu != ifr->ifr_mtu) {
Don't fail on device attach if jumbo frame support was unsuccessful. Because nfe(4) hardware doesn't support SG on Rx path, supporting jumbo frame requires very large contiguous kernel memory(i.e. several mega bytes). In case of lack of contiguous kernel memory that allocation request may always fail. However nfe(4) can operate on normal sized MTU frames, so go ahead and just disable jumbo frame support. While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable jumbo frame support. In nfe_poll, make sure to invoke correct Rx handler. Approved by: re (kensmith)
2007-07-24 01:11:00 +00:00
if ((((sc->nfe_flags & NFE_JUMBO_SUP) == 0) ||
(sc->nfe_jumbo_disable != 0)) &&
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ifr->ifr_mtu > ETHERMTU)
error = EINVAL;
else {
NFE_LOCK(sc);
ifp->if_mtu = ifr->ifr_mtu;
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
nfe_init_locked(sc);
NFE_UNLOCK(sc);
Fix the jumbo frame support. Submitted by: Peer Chen at nVIDIA (reworked by me)
2006-11-27 00:16:47 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
break;
case SIOCSIFFLAGS:
NFE_LOCK(sc);
if (ifp->if_flags & IFF_UP) {
/*
* If only the PROMISC or ALLMULTI flag changes, then
* don't do a full re-init of the chip, just update
* the Rx filter.
*/
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) &&
((ifp->if_flags ^ sc->nfe_if_flags) &
(IFF_ALLMULTI | IFF_PROMISC)) != 0)
nfe_setmulti(sc);
else
nfe_init_locked(sc);
} else {
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_stop(ifp);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
sc->nfe_if_flags = ifp->if_flags;
NFE_UNLOCK(sc);
error = 0;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_LOCK(sc);
nfe_setmulti(sc);
NFE_UNLOCK(sc);
error = 0;
}
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
mii = device_get_softc(sc->nfe_miibus);
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
break;
case SIOCSIFCAP:
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#ifdef DEVICE_POLLING
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((mask & IFCAP_POLLING) != 0) {
if ((ifr->ifr_reqcap & IFCAP_POLLING) != 0) {
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
error = ether_poll_register(nfe_poll, ifp);
if (error)
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
break;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_LOCK(sc);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_disable_intr(sc);
style(9) cleanup.
2006-10-19 10:01:26 +00:00
ifp->if_capenable |= IFCAP_POLLING;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_UNLOCK(sc);
} else {
error = ether_poll_deregister(ifp);
/* Enable interrupt even in error case */
NFE_LOCK(sc);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_enable_intr(sc);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp->if_capenable &= ~IFCAP_POLLING;
NFE_UNLOCK(sc);
}
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
#endif /* DEVICE_POLLING */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((sc->nfe_flags & NFE_HW_CSUM) != 0 &&
(mask & IFCAP_HWCSUM) != 0) {
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp->if_capenable ^= IFCAP_HWCSUM;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((IFCAP_TXCSUM & ifp->if_capenable) != 0 &&
(IFCAP_TXCSUM & ifp->if_capabilities) != 0)
ifp->if_hwassist |= NFE_CSUM_FEATURES;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
else
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ifp->if_hwassist &= ~NFE_CSUM_FEATURES;
init++;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((sc->nfe_flags & NFE_HW_VLAN) != 0 &&
(mask & IFCAP_VLAN_HWTAGGING) != 0) {
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
init++;
}
/*
* XXX
* It seems that VLAN stripping requires Rx checksum offload.
* Unfortunately FreeBSD has no way to disable only Rx side
* VLAN stripping. So when we know Rx checksum offload is
* disabled turn entire hardware VLAN assist off.
*/
if ((sc->nfe_flags & (NFE_HW_CSUM | NFE_HW_VLAN)) ==
(NFE_HW_CSUM | NFE_HW_VLAN)) {
if ((ifp->if_capenable & IFCAP_RXCSUM) == 0)
ifp->if_capenable &= ~IFCAP_VLAN_HWTAGGING;
}
if ((sc->nfe_flags & NFE_HW_CSUM) != 0 &&
(mask & IFCAP_TSO4) != 0) {
ifp->if_capenable ^= IFCAP_TSO4;
if ((IFCAP_TSO4 & ifp->if_capenable) != 0 &&
(IFCAP_TSO4 & ifp->if_capabilities) != 0)
ifp->if_hwassist |= CSUM_TSO;
else
ifp->if_hwassist &= ~CSUM_TSO;
}
if (init > 0 && (ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
Fix TX/RX checksum offload. Submitted by: Peer Chen at nVIDIA
2006-11-27 04:47:27 +00:00
nfe_init(sc);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
}
if ((sc->nfe_flags & NFE_HW_VLAN) != 0)
VLAN_CAPABILITIES(ifp);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
break;
default:
error = ether_ioctl(ifp, cmd, data);
break;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (error);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static int
style(9) cleanup.
2006-10-19 10:01:26 +00:00
nfe_intr(void *arg)
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
{
struct nfe_softc *sc;
uint32_t status;
sc = (struct nfe_softc *)arg;
status = NFE_READ(sc, sc->nfe_irq_status);
if (status == 0 || status == 0xffffffff)
return (FILTER_STRAY);
nfe_disable_intr(sc);
use the private task q thread instead of the shared system thread Reviewed by: yongari MFC after: 1 week
2007-11-16 15:51:47 +00:00
taskqueue_enqueue_fast(sc->nfe_tq, &sc->nfe_int_task);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (FILTER_HANDLED);
}
static void
nfe_int_task(void *arg, int pending)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
struct nfe_softc *sc = arg;
struct ifnet *ifp = sc->nfe_ifp;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
uint32_t r;
int domore;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
style(9) cleanup.
2006-10-19 10:01:26 +00:00
NFE_LOCK(sc);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((r = NFE_READ(sc, sc->nfe_irq_status)) == 0) {
nfe_enable_intr(sc);
NFE_UNLOCK(sc);
return; /* not for us */
}
NFE_WRITE(sc, sc->nfe_irq_status, r);
DPRINTFN(sc, 5, "nfe_intr: interrupt register %x\n", r);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#ifdef DEVICE_POLLING
if (ifp->if_capenable & IFCAP_POLLING) {
NFE_UNLOCK(sc);
return;
}
#endif
if (r & NFE_IRQ_LINK) {
NFE_READ(sc, NFE_PHY_STATUS);
NFE_WRITE(sc, NFE_PHY_STATUS, 0xf);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
DPRINTF(sc, "link state changed\n");
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
During boot(before setting IP address) PHY can generate link state change interrupt if the link is established with link parter. However interrupt handler didn't acknowledge the interrupt if nfe(4) was not running at the time of interrupt delivery. This caused endless interrupt generation. Fix the bug by acknowledging the interrupt regardless of running state of the driver. PR: kern/116295 Submitted by: Mark Derbyshire (mark At taom dot com) Approved by: re (kensmith)
2007-09-14 05:12:25 +00:00
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
NFE_UNLOCK(sc);
nfe_enable_intr(sc);
return;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
domore = 0;
/* check Rx ring */
if (sc->nfe_framesize > MCLBYTES - ETHER_HDR_LEN)
domore = nfe_jrxeof(sc, sc->nfe_process_limit);
else
domore = nfe_rxeof(sc, sc->nfe_process_limit);
/* check Tx ring */
nfe_txeof(sc);
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
use the private task q thread instead of the shared system thread Reviewed by: yongari MFC after: 1 week
2007-11-16 15:51:47 +00:00
taskqueue_enqueue_fast(sc->nfe_tq, &sc->nfe_tx_task);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_UNLOCK(sc);
if (domore || (NFE_READ(sc, sc->nfe_irq_status) != 0)) {
use the private task q thread instead of the shared system thread Reviewed by: yongari MFC after: 1 week
2007-11-16 15:51:47 +00:00
taskqueue_enqueue_fast(sc->nfe_tq, &sc->nfe_int_task);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/* Reenable interrupts. */
nfe_enable_intr(sc);
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static __inline void
nfe_discard_rxbuf(struct nfe_softc *sc, int idx)
{
struct nfe_desc32 *desc32;
struct nfe_desc64 *desc64;
struct nfe_rx_data *data;
struct mbuf *m;
data = &sc->rxq.data[idx];
m = data->m;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc64 = &sc->rxq.desc64[idx];
/* VLAN packet may have overwritten it. */
desc64->physaddr[0] = htole32(NFE_ADDR_HI(data->paddr));
desc64->physaddr[1] = htole32(NFE_ADDR_LO(data->paddr));
desc64->length = htole16(m->m_len);
desc64->flags = htole16(NFE_RX_READY);
} else {
desc32 = &sc->rxq.desc32[idx];
desc32->length = htole16(m->m_len);
desc32->flags = htole16(NFE_RX_READY);
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static __inline void
nfe_discard_jrxbuf(struct nfe_softc *sc, int idx)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_desc32 *desc32;
struct nfe_desc64 *desc64;
struct nfe_rx_data *data;
struct mbuf *m;
data = &sc->jrxq.jdata[idx];
m = data->m;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc64 = &sc->jrxq.jdesc64[idx];
/* VLAN packet may have overwritten it. */
desc64->physaddr[0] = htole32(NFE_ADDR_HI(data->paddr));
desc64->physaddr[1] = htole32(NFE_ADDR_LO(data->paddr));
desc64->length = htole16(m->m_len);
desc64->flags = htole16(NFE_RX_READY);
} else {
desc32 = &sc->jrxq.jdesc32[idx];
desc32->length = htole16(m->m_len);
desc32->flags = htole16(NFE_RX_READY);
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static int
nfe_newbuf(struct nfe_softc *sc, int idx)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_rx_data *data;
struct nfe_desc32 *desc32;
struct nfe_desc64 *desc64;
struct mbuf *m;
bus_dma_segment_t segs[1];
bus_dmamap_t map;
int nsegs;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (m == NULL)
return (ENOBUFS);
m->m_len = m->m_pkthdr.len = MCLBYTES;
m_adj(m, ETHER_ALIGN);
if (bus_dmamap_load_mbuf_sg(sc->rxq.rx_data_tag, sc->rxq.rx_spare_map,
m, segs, &nsegs, BUS_DMA_NOWAIT) != 0) {
m_freem(m);
return (ENOBUFS);
}
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
data = &sc->rxq.data[idx];
if (data->m != NULL) {
bus_dmamap_sync(sc->rxq.rx_data_tag, data->rx_data_map,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->rxq.rx_data_tag, data->rx_data_map);
}
map = data->rx_data_map;
data->rx_data_map = sc->rxq.rx_spare_map;
sc->rxq.rx_spare_map = map;
bus_dmamap_sync(sc->rxq.rx_data_tag, data->rx_data_map,
BUS_DMASYNC_PREREAD);
data->paddr = segs[0].ds_addr;
data->m = m;
/* update mapping address in h/w descriptor */
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc64 = &sc->rxq.desc64[idx];
desc64->physaddr[0] = htole32(NFE_ADDR_HI(segs[0].ds_addr));
desc64->physaddr[1] = htole32(NFE_ADDR_LO(segs[0].ds_addr));
desc64->length = htole16(segs[0].ds_len);
desc64->flags = htole16(NFE_RX_READY);
} else {
desc32 = &sc->rxq.desc32[idx];
desc32->physaddr = htole32(NFE_ADDR_LO(segs[0].ds_addr));
desc32->length = htole16(segs[0].ds_len);
desc32->flags = htole16(NFE_RX_READY);
}
return (0);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static int
nfe_jnewbuf(struct nfe_softc *sc, int idx)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_rx_data *data;
struct nfe_desc32 *desc32;
struct nfe_desc64 *desc64;
struct mbuf *m;
bus_dma_segment_t segs[1];
bus_dmamap_t map;
int nsegs;
void *buf;
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL)
return (ENOBUFS);
buf = nfe_jalloc(sc);
if (buf == NULL) {
m_freem(m);
return (ENOBUFS);
}
/* Attach the buffer to the mbuf. */
MEXTADD(m, buf, NFE_JLEN, nfe_jfree, (struct nfe_softc *)sc, 0,
EXT_NET_DRV);
if ((m->m_flags & M_EXT) == 0) {
m_freem(m);
return (ENOBUFS);
}
m->m_pkthdr.len = m->m_len = NFE_JLEN;
m_adj(m, ETHER_ALIGN);
if (bus_dmamap_load_mbuf_sg(sc->jrxq.jrx_data_tag,
sc->jrxq.jrx_spare_map, m, segs, &nsegs, BUS_DMA_NOWAIT) != 0) {
m_freem(m);
return (ENOBUFS);
}
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
data = &sc->jrxq.jdata[idx];
if (data->m != NULL) {
bus_dmamap_sync(sc->jrxq.jrx_data_tag, data->rx_data_map,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->jrxq.jrx_data_tag, data->rx_data_map);
}
map = data->rx_data_map;
data->rx_data_map = sc->jrxq.jrx_spare_map;
sc->jrxq.jrx_spare_map = map;
bus_dmamap_sync(sc->jrxq.jrx_data_tag, data->rx_data_map,
BUS_DMASYNC_PREREAD);
data->paddr = segs[0].ds_addr;
data->m = m;
/* update mapping address in h/w descriptor */
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc64 = &sc->jrxq.jdesc64[idx];
desc64->physaddr[0] = htole32(NFE_ADDR_HI(segs[0].ds_addr));
desc64->physaddr[1] = htole32(NFE_ADDR_LO(segs[0].ds_addr));
desc64->length = htole16(segs[0].ds_len);
desc64->flags = htole16(NFE_RX_READY);
} else {
desc32 = &sc->jrxq.jdesc32[idx];
desc32->physaddr = htole32(NFE_ADDR_LO(segs[0].ds_addr));
desc32->length = htole16(segs[0].ds_len);
desc32->flags = htole16(NFE_RX_READY);
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (0);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static int
nfe_rxeof(struct nfe_softc *sc, int count)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct ifnet *ifp = sc->nfe_ifp;
struct nfe_desc32 *desc32;
struct nfe_desc64 *desc64;
struct nfe_rx_data *data;
struct mbuf *m;
uint16_t flags;
int len, prog;
uint32_t vtag = 0;
NFE_LOCK_ASSERT(sc);
bus_dmamap_sync(sc->rxq.rx_desc_tag, sc->rxq.rx_desc_map,
BUS_DMASYNC_POSTREAD);
for (prog = 0;;NFE_INC(sc->rxq.cur, NFE_RX_RING_COUNT), vtag = 0) {
if (count <= 0)
break;
count--;
data = &sc->rxq.data[sc->rxq.cur];
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc64 = &sc->rxq.desc64[sc->rxq.cur];
vtag = le32toh(desc64->physaddr[1]);
flags = le16toh(desc64->flags);
len = le16toh(desc64->length) & NFE_RX_LEN_MASK;
} else {
desc32 = &sc->rxq.desc32[sc->rxq.cur];
flags = le16toh(desc32->flags);
len = le16toh(desc32->length) & NFE_RX_LEN_MASK;
}
if (flags & NFE_RX_READY)
break;
prog++;
if ((sc->nfe_flags & (NFE_JUMBO_SUP | NFE_40BIT_ADDR)) == 0) {
if (!(flags & NFE_RX_VALID_V1)) {
ifp->if_ierrors++;
nfe_discard_rxbuf(sc, sc->rxq.cur);
continue;
}
if ((flags & NFE_RX_FIXME_V1) == NFE_RX_FIXME_V1) {
flags &= ~NFE_RX_ERROR;
len--; /* fix buffer length */
}
} else {
if (!(flags & NFE_RX_VALID_V2)) {
ifp->if_ierrors++;
nfe_discard_rxbuf(sc, sc->rxq.cur);
continue;
}
if ((flags & NFE_RX_FIXME_V2) == NFE_RX_FIXME_V2) {
flags &= ~NFE_RX_ERROR;
len--; /* fix buffer length */
}
}
if (flags & NFE_RX_ERROR) {
ifp->if_ierrors++;
nfe_discard_rxbuf(sc, sc->rxq.cur);
continue;
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
m = data->m;
if (nfe_newbuf(sc, sc->rxq.cur) != 0) {
ifp->if_iqdrops++;
nfe_discard_rxbuf(sc, sc->rxq.cur);
continue;
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((vtag & NFE_RX_VTAG) != 0 &&
(ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) {
m->m_pkthdr.ether_vtag = vtag & 0xffff;
m->m_flags |= M_VLANTAG;
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
m->m_pkthdr.len = m->m_len = len;
m->m_pkthdr.rcvif = ifp;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) {
if ((flags & NFE_RX_IP_CSUMOK) != 0) {
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
if ((flags & NFE_RX_TCP_CSUMOK) != 0 ||
(flags & NFE_RX_UDP_CSUMOK) != 0) {
m->m_pkthdr.csum_flags |=
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
m->m_pkthdr.csum_data = 0xffff;
}
}
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ifp->if_ipackets++;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_UNLOCK(sc);
(*ifp->if_input)(ifp, m);
NFE_LOCK(sc);
}
if (prog > 0)
bus_dmamap_sync(sc->rxq.rx_desc_tag, sc->rxq.rx_desc_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (count > 0 ? 0 : EAGAIN);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
static int
nfe_jrxeof(struct nfe_softc *sc, int count)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
struct ifnet *ifp = sc->nfe_ifp;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_desc32 *desc32;
struct nfe_desc64 *desc64;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_rx_data *data;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct mbuf *m;
uint16_t flags;
int len, prog;
uint32_t vtag = 0;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_LOCK_ASSERT(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
bus_dmamap_sync(sc->jrxq.jrx_desc_tag, sc->jrxq.jrx_desc_map,
BUS_DMASYNC_POSTREAD);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
for (prog = 0;;NFE_INC(sc->jrxq.jcur, NFE_JUMBO_RX_RING_COUNT),
vtag = 0) {
if (count <= 0)
break;
count--;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
data = &sc->jrxq.jdata[sc->jrxq.jcur];
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (sc->nfe_flags & NFE_40BIT_ADDR) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc64 = &sc->jrxq.jdesc64[sc->jrxq.jcur];
vtag = le32toh(desc64->physaddr[1]);
flags = le16toh(desc64->flags);
len = le16toh(desc64->length) & NFE_RX_LEN_MASK;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
} else {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc32 = &sc->jrxq.jdesc32[sc->jrxq.jcur];
flags = le16toh(desc32->flags);
len = le16toh(desc32->length) & NFE_RX_LEN_MASK;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
if (flags & NFE_RX_READY)
break;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
prog++;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if ((sc->nfe_flags & (NFE_JUMBO_SUP | NFE_40BIT_ADDR)) == 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (!(flags & NFE_RX_VALID_V1)) {
ifp->if_ierrors++;
nfe_discard_jrxbuf(sc, sc->jrxq.jcur);
continue;
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
if ((flags & NFE_RX_FIXME_V1) == NFE_RX_FIXME_V1) {
flags &= ~NFE_RX_ERROR;
len--; /* fix buffer length */
}
} else {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (!(flags & NFE_RX_VALID_V2)) {
ifp->if_ierrors++;
nfe_discard_jrxbuf(sc, sc->jrxq.jcur);
continue;
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
if ((flags & NFE_RX_FIXME_V2) == NFE_RX_FIXME_V2) {
flags &= ~NFE_RX_ERROR;
len--; /* fix buffer length */
}
}
if (flags & NFE_RX_ERROR) {
ifp->if_ierrors++;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_discard_jrxbuf(sc, sc->jrxq.jcur);
continue;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
m = data->m;
if (nfe_jnewbuf(sc, sc->jrxq.jcur) != 0) {
ifp->if_iqdrops++;
nfe_discard_jrxbuf(sc, sc->jrxq.jcur);
continue;
Reformat to KNF after revision 1.12.
2006-11-27 00:23:59 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((vtag & NFE_RX_VTAG) != 0 &&
(ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) {
m->m_pkthdr.ether_vtag = vtag & 0xffff;
m->m_flags |= M_VLANTAG;
Reformat to KNF after revision 1.12.
2006-11-27 00:23:59 +00:00
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
m->m_pkthdr.len = m->m_len = len;
m->m_pkthdr.rcvif = ifp;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) {
if ((flags & NFE_RX_IP_CSUMOK) != 0) {
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((flags & NFE_RX_TCP_CSUMOK) != 0 ||
(flags & NFE_RX_UDP_CSUMOK) != 0) {
m->m_pkthdr.csum_flags |=
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
m->m_pkthdr.csum_data = 0xffff;
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
ifp->if_ipackets++;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_UNLOCK(sc);
(*ifp->if_input)(ifp, m);
NFE_LOCK(sc);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (prog > 0)
bus_dmamap_sync(sc->jrxq.jrx_desc_tag, sc->jrxq.jrx_desc_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (count > 0 ? 0 : EAGAIN);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
nfe_txeof(struct nfe_softc *sc)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct ifnet *ifp = sc->nfe_ifp;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
struct nfe_desc32 *desc32;
struct nfe_desc64 *desc64;
struct nfe_tx_data *data = NULL;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
uint16_t flags;
int cons, prog;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_LOCK_ASSERT(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
bus_dmamap_sync(sc->txq.tx_desc_tag, sc->txq.tx_desc_map,
BUS_DMASYNC_POSTREAD);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
prog = 0;
for (cons = sc->txq.next; cons != sc->txq.cur;
NFE_INC(cons, NFE_TX_RING_COUNT)) {
if (sc->nfe_flags & NFE_40BIT_ADDR) {
desc64 = &sc->txq.desc64[cons];
flags = le16toh(desc64->flags);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
} else {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc32 = &sc->txq.desc32[cons];
flags = le16toh(desc32->flags);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
if (flags & NFE_TX_VALID)
break;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
prog++;
sc->txq.queued--;
data = &sc->txq.data[cons];
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if ((sc->nfe_flags & (NFE_JUMBO_SUP | NFE_40BIT_ADDR)) == 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((flags & NFE_TX_LASTFRAG_V1) == 0)
continue;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
if ((flags & NFE_TX_ERROR_V1) != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev,
"tx v1 error 0x%4b\n", flags, NFE_V1_TXERR);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
ifp->if_oerrors++;
} else
ifp->if_opackets++;
} else {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((flags & NFE_TX_LASTFRAG_V2) == 0)
continue;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
if ((flags & NFE_TX_ERROR_V2) != 0) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
device_printf(sc->nfe_dev,
"tx v2 error 0x%4b\n", flags, NFE_V2_TXERR);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
ifp->if_oerrors++;
} else
ifp->if_opackets++;
}
/* last fragment of the mbuf chain transmitted */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
KASSERT(data->m != NULL, ("%s: freeing NULL mbuf!", __func__));
bus_dmamap_sync(sc->txq.tx_data_tag, data->tx_data_map,
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
BUS_DMASYNC_POSTWRITE);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
bus_dmamap_unload(sc->txq.tx_data_tag, data->tx_data_map);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
m_freem(data->m);
data->m = NULL;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (prog > 0) {
sc->nfe_force_tx = 0;
sc->txq.next = cons;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->txq.queued == 0)
sc->nfe_watchdog_timer = 0;
}
}
/*
* It's copy of ath_defrag(ath(4)).
*
* Defragment an mbuf chain, returning at most maxfrags separate
* mbufs+clusters. If this is not possible NULL is returned and
* the original mbuf chain is left in it's present (potentially
* modified) state. We use two techniques: collapsing consecutive
* mbufs and replacing consecutive mbufs by a cluster.
*/
static struct mbuf *
nfe_defrag(struct mbuf *m0, int how, int maxfrags)
{
struct mbuf *m, *n, *n2, **prev;
u_int curfrags;
/*
* Calculate the current number of frags.
*/
curfrags = 0;
for (m = m0; m != NULL; m = m->m_next)
curfrags++;
/*
* First, try to collapse mbufs. Note that we always collapse
* towards the front so we don't need to deal with moving the
* pkthdr. This may be suboptimal if the first mbuf has much
* less data than the following.
*/
m = m0;
again:
for (;;) {
n = m->m_next;
if (n == NULL)
break;
if ((m->m_flags & M_RDONLY) == 0 &&
n->m_len < M_TRAILINGSPACE(m)) {
bcopy(mtod(n, void *), mtod(m, char *) + m->m_len,
n->m_len);
m->m_len += n->m_len;
m->m_next = n->m_next;
m_free(n);
if (--curfrags <= maxfrags)
return (m0);
} else
m = n;
}
KASSERT(maxfrags > 1,
("maxfrags %u, but normal collapse failed", maxfrags));
/*
* Collapse consecutive mbufs to a cluster.
*/
prev = &m0->m_next; /* NB: not the first mbuf */
while ((n = *prev) != NULL) {
if ((n2 = n->m_next) != NULL &&
n->m_len + n2->m_len < MCLBYTES) {
m = m_getcl(how, MT_DATA, 0);
if (m == NULL)
goto bad;
bcopy(mtod(n, void *), mtod(m, void *), n->m_len);
bcopy(mtod(n2, void *), mtod(m, char *) + n->m_len,
n2->m_len);
m->m_len = n->m_len + n2->m_len;
m->m_next = n2->m_next;
*prev = m;
m_free(n);
m_free(n2);
if (--curfrags <= maxfrags) /* +1 cl -2 mbufs */
return m0;
/*
* Still not there, try the normal collapse
* again before we allocate another cluster.
*/
goto again;
}
prev = &n->m_next;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/*
* No place where we can collapse to a cluster; punt.
* This can occur if, for example, you request 2 frags
* but the packet requires that both be clusters (we
* never reallocate the first mbuf to avoid moving the
* packet header).
*/
bad:
return (NULL);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static int
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_encap(struct nfe_softc *sc, struct mbuf **m_head)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_desc32 *desc32 = NULL;
struct nfe_desc64 *desc64 = NULL;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
bus_dmamap_t map;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
bus_dma_segment_t segs[NFE_MAX_SCATTER];
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
int error, i, nsegs, prod, si;
uint32_t tso_segsz;
uint16_t cflags, flags;
struct mbuf *m;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
prod = si = sc->txq.cur;
map = sc->txq.data[prod].tx_data_map;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
error = bus_dmamap_load_mbuf_sg(sc->txq.tx_data_tag, map, *m_head, segs,
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
&nsegs, BUS_DMA_NOWAIT);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (error == EFBIG) {
m = nfe_defrag(*m_head, M_DONTWAIT, NFE_MAX_SCATTER);
if (m == NULL) {
m_freem(*m_head);
*m_head = NULL;
return (ENOBUFS);
}
*m_head = m;
error = bus_dmamap_load_mbuf_sg(sc->txq.tx_data_tag, map,
*m_head, segs, &nsegs, BUS_DMA_NOWAIT);
if (error != 0) {
m_freem(*m_head);
*m_head = NULL;
return (ENOBUFS);
}
} else if (error != 0)
return (error);
if (nsegs == 0) {
m_freem(*m_head);
*m_head = NULL;
return (EIO);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->txq.queued + nsegs >= NFE_TX_RING_COUNT - 2) {
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
bus_dmamap_unload(sc->txq.tx_data_tag, map);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (ENOBUFS);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
m = *m_head;
cflags = flags = 0;
tso_segsz = 0;
if ((m->m_pkthdr.csum_flags & NFE_CSUM_FEATURES) != 0) {
if ((m->m_pkthdr.csum_flags & CSUM_IP) != 0)
cflags |= NFE_TX_IP_CSUM;
if ((m->m_pkthdr.csum_flags & CSUM_TCP) != 0)
cflags |= NFE_TX_TCP_UDP_CSUM;
if ((m->m_pkthdr.csum_flags & CSUM_UDP) != 0)
cflags |= NFE_TX_TCP_UDP_CSUM;
}
if ((m->m_pkthdr.csum_flags & CSUM_TSO) != 0) {
tso_segsz = (uint32_t)m->m_pkthdr.tso_segsz <<
NFE_TX_TSO_SHIFT;
cflags &= ~(NFE_TX_IP_CSUM | NFE_TX_TCP_UDP_CSUM);
cflags |= NFE_TX_TSO;
Fix TX/RX checksum offload. Submitted by: Peer Chen at nVIDIA
2006-11-27 04:47:27 +00:00
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
for (i = 0; i < nsegs; i++) {
if (sc->nfe_flags & NFE_40BIT_ADDR) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc64 = &sc->txq.desc64[prod];
desc64->physaddr[0] =
htole32(NFE_ADDR_HI(segs[i].ds_addr));
desc64->physaddr[1] =
htole32(NFE_ADDR_LO(segs[i].ds_addr));
desc64->vtag = 0;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
desc64->length = htole16(segs[i].ds_len - 1);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
desc64->flags = htole16(flags);
} else {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc32 = &sc->txq.desc32[prod];
desc32->physaddr =
htole32(NFE_ADDR_LO(segs[i].ds_addr));
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
desc32->length = htole16(segs[i].ds_len - 1);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
desc32->flags = htole16(flags);
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/*
* Setting of the valid bit in the first descriptor is
* deferred until the whole chain is fully setup.
*/
flags |= NFE_TX_VALID;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
sc->txq.queued++;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_INC(prod, NFE_TX_RING_COUNT);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/*
* the whole mbuf chain has been DMA mapped, fix last/first descriptor.
* csum flags, vtag and TSO belong to the first fragment only.
*/
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (sc->nfe_flags & NFE_40BIT_ADDR) {
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc64->flags |= htole16(NFE_TX_LASTFRAG_V2);
desc64 = &sc->txq.desc64[si];
if ((m->m_flags & M_VLANTAG) != 0)
desc64->vtag = htole32(NFE_TX_VTAG |
m->m_pkthdr.ether_vtag);
if (tso_segsz != 0) {
/*
* XXX
* The following indicates the descriptor element
* is a 32bit quantity.
*/
desc64->length |= htole16((uint16_t)tso_segsz);
desc64->flags |= htole16(tso_segsz >> 16);
}
/*
* finally, set the valid/checksum/TSO bit in the first
* descriptor.
*/
desc64->flags |= htole16(NFE_TX_VALID | cflags);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
} else {
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (sc->nfe_flags & NFE_JUMBO_SUP)
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc32->flags |= htole16(NFE_TX_LASTFRAG_V2);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
else
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
desc32->flags |= htole16(NFE_TX_LASTFRAG_V1);
desc32 = &sc->txq.desc32[si];
if (tso_segsz != 0) {
/*
* XXX
* The following indicates the descriptor element
* is a 32bit quantity.
*/
desc32->length |= htole16((uint16_t)tso_segsz);
desc32->flags |= htole16(tso_segsz >> 16);
}
/*
* finally, set the valid/checksum/TSO bit in the first
* descriptor.
*/
desc32->flags |= htole16(NFE_TX_VALID | cflags);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc->txq.cur = prod;
prod = (prod + NFE_TX_RING_COUNT - 1) % NFE_TX_RING_COUNT;
sc->txq.data[si].tx_data_map = sc->txq.data[prod].tx_data_map;
sc->txq.data[prod].tx_data_map = map;
sc->txq.data[prod].m = m;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
bus_dmamap_sync(sc->txq.tx_data_tag, map, BUS_DMASYNC_PREWRITE);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (0);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
nfe_setmulti(struct nfe_softc *sc)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
struct ifnet *ifp = sc->nfe_ifp;
style(9) cleanup.
2006-10-19 10:01:26 +00:00
struct ifmultiaddr *ifma;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
int i;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
uint32_t filter;
uint8_t addr[ETHER_ADDR_LEN], mask[ETHER_ADDR_LEN];
uint8_t etherbroadcastaddr[ETHER_ADDR_LEN] = {
style(9) cleanup.
2006-10-19 10:01:26 +00:00
0xff, 0xff, 0xff, 0xff, 0xff, 0xff
};
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_LOCK_ASSERT(sc);
if ((ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) != 0) {
bzero(addr, ETHER_ADDR_LEN);
bzero(mask, ETHER_ADDR_LEN);
goto done;
}
bcopy(etherbroadcastaddr, addr, ETHER_ADDR_LEN);
bcopy(etherbroadcastaddr, mask, ETHER_ADDR_LEN);
IF_ADDR_LOCK(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
u_char *addrp;
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
addrp = LLADDR((struct sockaddr_dl *) ifma->ifma_addr);
for (i = 0; i < ETHER_ADDR_LEN; i++) {
u_int8_t mcaddr = addrp[i];
addr[i] &= mcaddr;
mask[i] &= ~mcaddr;
}
}
IF_ADDR_UNLOCK(ifp);
for (i = 0; i < ETHER_ADDR_LEN; i++) {
mask[i] |= addr[i];
}
done:
addr[0] |= 0x01; /* make sure multicast bit is set */
NFE_WRITE(sc, NFE_MULTIADDR_HI,
addr[3] << 24 | addr[2] << 16 | addr[1] << 8 | addr[0]);
NFE_WRITE(sc, NFE_MULTIADDR_LO,
addr[5] << 8 | addr[4]);
NFE_WRITE(sc, NFE_MULTIMASK_HI,
mask[3] << 24 | mask[2] << 16 | mask[1] << 8 | mask[0]);
NFE_WRITE(sc, NFE_MULTIMASK_LO,
mask[5] << 8 | mask[4]);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
filter = NFE_READ(sc, NFE_RXFILTER);
filter &= NFE_PFF_RX_PAUSE;
filter |= NFE_RXFILTER_MAGIC;
filter |= (ifp->if_flags & IFF_PROMISC) ? NFE_PFF_PROMISC : NFE_PFF_U2M;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_WRITE(sc, NFE_RXFILTER, filter);
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_tx_task(void *arg, int pending)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct ifnet *ifp;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ifp = (struct ifnet *)arg;
nfe_start(ifp);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_start(struct ifnet *ifp)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
struct nfe_softc *sc = ifp->if_softc;
struct mbuf *m0;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
int enq;
NFE_LOCK(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
IFF_DRV_RUNNING || sc->nfe_link == 0) {
NFE_UNLOCK(sc);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
return;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd);) {
IFQ_DRV_DEQUEUE(&ifp->if_snd, m0);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
if (m0 == NULL)
break;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (nfe_encap(sc, &m0) != 0) {
if (m0 == NULL)
break;
IFQ_DRV_PREPEND(&ifp->if_snd, m0);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
break;
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
enq++;
Catch up the rest of the drivers with the ether_vlan_mtap modifications. If these drivers are setting M_VLANTAG because they are stripping the layer 2 802.1Q headers, then they need to be re-inserting them so any bpf(4) peers can properly decode them. It should be noted that this is compiled tested only. MFC after: 3 weeks
2007-03-04 03:38:08 +00:00
ETHER_BPF_MTAP(ifp, m0);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (enq > 0) {
bus_dmamap_sync(sc->txq.tx_desc_tag, sc->txq.tx_desc_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/* kick Tx */
NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_KICKTX | sc->rxtxctl);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/*
* Set a timeout in case the chip goes out to lunch.
*/
sc->nfe_watchdog_timer = 5;
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_UNLOCK(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
nfe_watchdog(struct ifnet *ifp)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
struct nfe_softc *sc = ifp->if_softc;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_watchdog_timer == 0 || --sc->nfe_watchdog_timer)
return;
/* Check if we've lost Tx completion interrupt. */
nfe_txeof(sc);
if (sc->txq.queued == 0) {
if_printf(ifp, "watchdog timeout (missed Tx interrupts) "
"-- recovering\n");
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
use the private task q thread instead of the shared system thread Reviewed by: yongari MFC after: 1 week
2007-11-16 15:51:47 +00:00
taskqueue_enqueue_fast(sc->nfe_tq, &sc->nfe_tx_task);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return;
}
/* Check if we've lost start Tx command. */
sc->nfe_force_tx++;
if (sc->nfe_force_tx <= 3) {
/*
* If this is the case for watchdog timeout, the following
* code should go to nfe_txeof().
*/
NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_KICKTX | sc->rxtxctl);
return;
}
sc->nfe_force_tx = 0;
if_printf(ifp, "watchdog timeout\n");
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
ifp->if_oerrors++;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_init_locked(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
nfe_init(void *xsc)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_softc *sc = xsc;
NFE_LOCK(sc);
nfe_init_locked(sc);
NFE_UNLOCK(sc);
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
nfe_init_locked(void *xsc)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
struct nfe_softc *sc = xsc;
struct ifnet *ifp = sc->nfe_ifp;
struct mii_data *mii;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
uint32_t val;
int error;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_LOCK_ASSERT(sc);
mii = device_get_softc(sc->nfe_miibus);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
return;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_stop(ifp);
sc->nfe_framesize = ifp->if_mtu + NFE_RX_HEADERS;
nfe_init_tx_ring(sc, &sc->txq);
if (sc->nfe_framesize > (MCLBYTES - ETHER_HDR_LEN))
error = nfe_init_jrx_ring(sc, &sc->jrxq);
else
error = nfe_init_rx_ring(sc, &sc->rxq);
if (error != 0) {
device_printf(sc->nfe_dev,
"initialization failed: no memory for rx buffers\n");
nfe_stop(ifp);
return;
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
val = 0;
if ((sc->nfe_flags & NFE_CORRECT_MACADDR) != 0)
val |= NFE_MAC_ADDR_INORDER;
NFE_WRITE(sc, NFE_TX_UNK, val);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
NFE_WRITE(sc, NFE_STATUS, 0);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((sc->nfe_flags & NFE_TX_FLOW_CTRL) != 0)
NFE_WRITE(sc, NFE_TX_PAUSE_FRAME, NFE_TX_PAUSE_FRAME_DISABLE);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
sc->rxtxctl = NFE_RXTX_BIT2;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
if (sc->nfe_flags & NFE_40BIT_ADDR)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
sc->rxtxctl |= NFE_RXTX_V3MAGIC;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
else if (sc->nfe_flags & NFE_JUMBO_SUP)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
sc->rxtxctl |= NFE_RXTX_V2MAGIC;
Fix TX/RX checksum offload. Submitted by: Peer Chen at nVIDIA
2006-11-27 04:47:27 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
sc->rxtxctl |= NFE_RXTX_RXCSUM;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0)
sc->rxtxctl |= NFE_RXTX_VTAG_INSERT | NFE_RXTX_VTAG_STRIP;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_RESET | sc->rxtxctl);
DELAY(10);
NFE_WRITE(sc, NFE_RXTX_CTL, sc->rxtxctl);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
NFE_WRITE(sc, NFE_VTAG_CTL, NFE_VTAG_ENABLE);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
else
NFE_WRITE(sc, NFE_VTAG_CTL, 0);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
NFE_WRITE(sc, NFE_SETUP_R6, 0);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* set MAC address */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_set_macaddr(sc, IF_LLADDR(ifp));
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* tell MAC where rings are in memory */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (sc->nfe_framesize > MCLBYTES - ETHER_HDR_LEN) {
NFE_WRITE(sc, NFE_RX_RING_ADDR_HI,
NFE_ADDR_HI(sc->jrxq.jphysaddr));
NFE_WRITE(sc, NFE_RX_RING_ADDR_LO,
NFE_ADDR_LO(sc->jrxq.jphysaddr));
} else {
NFE_WRITE(sc, NFE_RX_RING_ADDR_HI,
NFE_ADDR_HI(sc->rxq.physaddr));
NFE_WRITE(sc, NFE_RX_RING_ADDR_LO,
NFE_ADDR_LO(sc->rxq.physaddr));
}
NFE_WRITE(sc, NFE_TX_RING_ADDR_HI, NFE_ADDR_HI(sc->txq.physaddr));
NFE_WRITE(sc, NFE_TX_RING_ADDR_LO, NFE_ADDR_LO(sc->txq.physaddr));
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_WRITE(sc, NFE_RING_SIZE,
(NFE_RX_RING_COUNT - 1) << 16 |
(NFE_TX_RING_COUNT - 1));
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_WRITE(sc, NFE_RXBUFSZ, sc->nfe_framesize);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* force MAC to wakeup */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
val = NFE_READ(sc, NFE_PWR_STATE);
if ((val & NFE_PWR_WAKEUP) == 0)
NFE_WRITE(sc, NFE_PWR_STATE, val | NFE_PWR_WAKEUP);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
DELAY(10);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
val = NFE_READ(sc, NFE_PWR_STATE);
NFE_WRITE(sc, NFE_PWR_STATE, val | NFE_PWR_VALID);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#if 1
/* configure interrupts coalescing/mitigation */
NFE_WRITE(sc, NFE_IMTIMER, NFE_IM_DEFAULT);
#else
/* no interrupt mitigation: one interrupt per packet */
NFE_WRITE(sc, NFE_IMTIMER, 970);
#endif
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_WRITE(sc, NFE_SETUP_R1, NFE_R1_MAGIC_10_100);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_WRITE(sc, NFE_SETUP_R2, NFE_R2_MAGIC);
NFE_WRITE(sc, NFE_SETUP_R6, NFE_R6_MAGIC);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* update MAC knowledge of PHY; generates a NFE_IRQ_LINK interrupt */
NFE_WRITE(sc, NFE_STATUS, sc->mii_phyaddr << 24 | NFE_STATUS_MAGIC);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_WRITE(sc, NFE_SETUP_R4, NFE_R4_MAGIC);
NFE_WRITE(sc, NFE_WOL_CTL, NFE_WOL_MAGIC);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
sc->rxtxctl &= ~NFE_RXTX_BIT2;
NFE_WRITE(sc, NFE_RXTX_CTL, sc->rxtxctl);
DELAY(10);
NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_BIT1 | sc->rxtxctl);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* set Rx filter */
nfe_setmulti(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* enable Rx */
NFE_WRITE(sc, NFE_RX_CTL, NFE_RX_START);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* enable Tx */
NFE_WRITE(sc, NFE_TX_CTL, NFE_TX_START);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_WRITE(sc, NFE_PHY_STATUS, 0xf);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
#ifdef DEVICE_POLLING
if (ifp->if_capenable & IFCAP_POLLING)
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_disable_intr(sc);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
else
#endif
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_set_intr(sc);
nfe_enable_intr(sc); /* enable interrupts */
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
sc->nfe_link = 0;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
mii_mediachg(mii);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
callout_reset(&sc->nfe_stat_ch, hz, nfe_tick, sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_stop(struct ifnet *ifp)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
struct nfe_softc *sc = ifp->if_softc;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_rx_ring *rx_ring;
struct nfe_jrx_ring *jrx_ring;
struct nfe_tx_ring *tx_ring;
struct nfe_rx_data *rdata;
struct nfe_tx_data *tdata;
int i;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_LOCK_ASSERT(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc->nfe_watchdog_timer = 0;
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
callout_stop(&sc->nfe_stat_ch);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* abort Tx */
NFE_WRITE(sc, NFE_TX_CTL, 0);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* disable Rx */
NFE_WRITE(sc, NFE_RX_CTL, 0);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* disable interrupts */
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_disable_intr(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
sc->nfe_link = 0;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
/* free Rx and Tx mbufs still in the queues. */
rx_ring = &sc->rxq;
for (i = 0; i < NFE_RX_RING_COUNT; i++) {
rdata = &rx_ring->data[i];
if (rdata->m != NULL) {
bus_dmamap_sync(rx_ring->rx_data_tag,
rdata->rx_data_map, BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(rx_ring->rx_data_tag,
rdata->rx_data_map);
m_freem(rdata->m);
rdata->m = NULL;
}
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if ((sc->nfe_flags & NFE_JUMBO_SUP) != 0) {
jrx_ring = &sc->jrxq;
for (i = 0; i < NFE_JUMBO_RX_RING_COUNT; i++) {
rdata = &jrx_ring->jdata[i];
if (rdata->m != NULL) {
bus_dmamap_sync(jrx_ring->jrx_data_tag,
rdata->rx_data_map, BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(jrx_ring->jrx_data_tag,
rdata->rx_data_map);
m_freem(rdata->m);
rdata->m = NULL;
}
}
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
tx_ring = &sc->txq;
for (i = 0; i < NFE_RX_RING_COUNT; i++) {
tdata = &tx_ring->data[i];
if (tdata->m != NULL) {
bus_dmamap_sync(tx_ring->tx_data_tag,
tdata->tx_data_map, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(tx_ring->tx_data_tag,
tdata->tx_data_map);
m_freem(tdata->m);
tdata->m = NULL;
}
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static int
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_ifmedia_upd(struct ifnet *ifp)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
style(9) cleanup.
2006-10-19 10:01:26 +00:00
struct nfe_softc *sc = ifp->if_softc;
struct mii_data *mii;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_LOCK(sc);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
mii = device_get_softc(sc->nfe_miibus);
mii_mediachg(mii);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
NFE_UNLOCK(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
return (0);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
nfe_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
style(9) cleanup.
2006-10-19 10:01:26 +00:00
struct nfe_softc *sc;
struct mii_data *mii;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
sc = ifp->if_softc;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_LOCK(sc);
mii = device_get_softc(sc->nfe_miibus);
mii_pollstat(mii);
NFE_UNLOCK(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
style(9) cleanup.
2006-10-19 10:01:26 +00:00
void
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_tick(void *xsc)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
style(9) cleanup.
2006-10-19 10:01:26 +00:00
struct nfe_softc *sc;
struct mii_data *mii;
struct ifnet *ifp;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
sc = (struct nfe_softc *)xsc;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
style(9) cleanup.
2006-10-19 10:01:26 +00:00
NFE_LOCK_ASSERT(sc);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
ifp = sc->nfe_ifp;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
mii = device_get_softc(sc->nfe_miibus);
mii_tick(mii);
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_watchdog(ifp);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
callout_reset(&sc->nfe_stat_ch, hz, nfe_tick, sc);
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Fix function prototype for device_shutdown method.
2007-11-22 02:45:00 +00:00
static int
style(9) cleanup.
2006-10-19 10:01:26 +00:00
nfe_shutdown(device_t dev)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
{
struct nfe_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
NFE_LOCK(sc);
ifp = sc->nfe_ifp;
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_stop(ifp);
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/* nfe_reset(sc); */
NFE_UNLOCK(sc);
Fix function prototype for device_shutdown method.
2007-11-22 02:45:00 +00:00
return (0);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_get_macaddr(struct nfe_softc *sc, uint8_t *addr)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
uint32_t val;
if ((sc->nfe_flags & NFE_CORRECT_MACADDR) == 0) {
val = NFE_READ(sc, NFE_MACADDR_LO);
addr[0] = (val >> 8) & 0xff;
addr[1] = (val & 0xff);
val = NFE_READ(sc, NFE_MACADDR_HI);
addr[2] = (val >> 24) & 0xff;
addr[3] = (val >> 16) & 0xff;
addr[4] = (val >> 8) & 0xff;
addr[5] = (val & 0xff);
} else {
val = NFE_READ(sc, NFE_MACADDR_LO);
addr[5] = (val >> 8) & 0xff;
addr[4] = (val & 0xff);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
val = NFE_READ(sc, NFE_MACADDR_HI);
addr[3] = (val >> 24) & 0xff;
addr[2] = (val >> 16) & 0xff;
addr[1] = (val >> 8) & 0xff;
addr[0] = (val & 0xff);
}
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
static void
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_set_macaddr(struct nfe_softc *sc, uint8_t *addr)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
NFE_WRITE(sc, NFE_MACADDR_LO, addr[5] << 8 | addr[4]);
NFE_WRITE(sc, NFE_MACADDR_HI, addr[3] << 24 | addr[2] << 16 |
addr[1] << 8 | addr[0]);
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
style(9) cleanup.
2006-10-19 10:01:26 +00:00
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
/*
* Map a single buffer address.
*/
static void
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
nfe_dma_map_segs(void *arg, bus_dma_segment_t *segs, int nseg, int error)
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
{
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
struct nfe_dmamap_arg *ctx;
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
if (error != 0)
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
return;
KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
ctx = (struct nfe_dmamap_arg *)arg;
ctx->nfe_busaddr = segs[0].ds_addr;
}
static int
sysctl_int_range(SYSCTL_HANDLER_ARGS, int low, int high)
{
int error, value;
if (!arg1)
return (EINVAL);
value = *(int *)arg1;
error = sysctl_handle_int(oidp, &value, 0, req);
if (error || !req->newptr)
return (error);
if (value < low || value > high)
return (EINVAL);
*(int *)arg1 = value;
return (0);
}
static int
sysctl_hw_nfe_proc_limit(SYSCTL_HANDLER_ARGS)
{
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
Bring overhauled nfe(4) into tree. o s/printf/device_printf/g o Nuke OpenBSDism. o Nuke NetBSD/OpenBSD specific DMA sync operations.(we don't have a way to sync a single descriptor within a DMA map.) o Remove recursive mutex. o bus_dma(9) clean up. o 40bit DMA address support. o Add protection for Rx map load failure. o Fix a long standing bug for watchdog timeout. [1] o Add additional protections, missing Tx completion interrupt, losing start Tx command, for watchdog timeout. o Switch to taskqueue(9) API to handle interrupts. o Use our own timer for watchdog instead of if_watchdog/if_timer interface. o Advertise VLAN header length/capability correctly to upper layer. o Remove excessive kernel stack consumption in nfe_encap(). o Handle highly fragmented mbuf chains correctly. o Enable etherenet address reprogramming with ifconfig(8). o Add ALTQ/TSO, MSI/MSIX support. o Increased Rx ring to 256 descriptors from 128. o Align Tx/Rx descriptor ring on sizeof(struct nfe_desc64) boundary. o Remove alignment restrictions on Tx/Rx buffers. o Rewritten jumbo frame support code. o Add support for hardware assistend VLAN tag insertion/stripping. o Add support for Tx/Rx flow control based on patches from Peer Chen. [2] o Add a routine that detects whether ethernet address swap routines is required. [3] o Add a workaround that take MAC/PHY out of power down mode. o Add suspend/resume support. o style(9) and code clean up. Special thanks to Shigeaki Tagashira, the original porter of nfe(4), who submitted lots of patches, performed uncountable number of regression tests and maintained nfe(4) for a long time. Without his enthusiastic help and support I could never have completed this overhauling task. The only weak point of nfe(4) compared to nve(4) is instability of manual half-duplex media selection on certain hardwares(auto sensing media type should work for all cases, though). This was a long standing bug of nfe(4) and I still have no idea why it doesn't work on some hardwares. Obtained from: OpenBSD [1] Submitted by: Peer Chen < pchen at nvidia dot com > [2], [3] Reviewed by: Shigeaki Tagashira < shigeaki AT se DOT hiroshima-u DOT ac DOT jp > Tested by: Shigeaki Tagashira, current Discussed with: current Silence from: obrien
2007-06-12 02:16:02 +00:00
return (sysctl_int_range(oidp, arg1, arg2, req, NFE_PROC_MIN,
NFE_PROC_MAX));
Import the nfe (nForce Ethernet) driver from OpenBSD. This is a pure open source NIC driver with a BSD license. These bits were taken from the OpenBSD public CVS repository on 1-May-06.
2006-06-26 17:25:22 +00:00
}
Reference in New Issue Copy Permalink