freebsd-nq/sys/dev/atkbdc/atkbd_atkbdc.c

178 lines
4.6 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
2003-06-11 00:34:37 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_kbd.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
2004-05-30 20:27:19 +00:00
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <sys/kbio.h>
#include <dev/kbd/kbdreg.h>
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#include <dev/atkbdc/atkbdreg.h>
#include <dev/atkbdc/atkbdcreg.h>
typedef struct {
struct resource *intr;
void *ih;
} atkbd_softc_t;
static devclass_t atkbd_devclass;
static void atkbdidentify(driver_t *driver, device_t dev);
static int atkbdprobe(device_t dev);
static int atkbdattach(device_t dev);
static int atkbdresume(device_t dev);
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
static void atkbdintr(void *arg);
static device_method_t atkbd_methods[] = {
DEVMETHOD(device_identify, atkbdidentify),
DEVMETHOD(device_probe, atkbdprobe),
DEVMETHOD(device_attach, atkbdattach),
DEVMETHOD(device_resume, atkbdresume),
{ 0, 0 }
};
static driver_t atkbd_driver = {
ATKBD_DRIVER_NAME,
atkbd_methods,
sizeof(atkbd_softc_t),
};
static void
atkbdidentify(driver_t *driver, device_t parent)
{
/* always add at least one child */
BUS_ADD_CHILD(parent, KBDC_RID_KBD, driver->name, device_get_unit(parent));
}
static int
atkbdprobe(device_t dev)
{
struct resource *res;
u_long irq;
int flags;
int rid;
device_set_desc(dev, "AT Keyboard");
/* obtain parameters */
flags = device_get_flags(dev);
/* see if IRQ is available */
rid = KBDC_RID_KBD;
res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (res == NULL) {
if (bootverbose)
device_printf(dev, "unable to allocate IRQ\n");
return ENXIO;
}
irq = rman_get_start(res);
bus_release_resource(dev, SYS_RES_IRQ, rid, res);
/* probe the device */
return atkbd_probe_unit(device_get_unit(dev),
device_get_unit(device_get_parent(dev)),
irq, flags);
}
static int
atkbdattach(device_t dev)
{
atkbd_softc_t *sc;
keyboard_t *kbd;
u_long irq;
int flags;
int rid;
int error;
sc = device_get_softc(dev);
rid = KBDC_RID_KBD;
irq = bus_get_resource_start(dev, SYS_RES_IRQ, rid);
flags = device_get_flags(dev);
error = atkbd_attach_unit(device_get_unit(dev), &kbd,
device_get_unit(device_get_parent(dev)),
irq, flags);
if (error)
return error;
/* declare our interrupt handler */
sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->intr == NULL)
return ENXIO;
error = bus_setup_intr(dev, sc->intr, INTR_TYPE_TTY, NULL, atkbdintr,
kbd, &sc->ih);
if (error)
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
return error;
}
static int
atkbdresume(device_t dev)
{
atkbd_softc_t *sc;
keyboard_t *kbd;
int args[2];
sc = device_get_softc(dev);
kbd = kbd_get_keyboard(kbd_find_keyboard(ATKBD_DRIVER_NAME,
device_get_unit(dev)));
if (kbd) {
kbd->kb_flags &= ~KB_INITIALIZED;
args[0] = device_get_unit(device_get_parent(dev));
args[1] = rman_get_start(sc->intr);
(*kbdsw[kbd->kb_index]->init)(device_get_unit(dev), &kbd,
args, device_get_flags(dev));
(*kbdsw[kbd->kb_index]->clear_state)(kbd);
}
return 0;
}
static void
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
atkbdintr(void *arg)
{
keyboard_t *kbd;
kbd = (keyboard_t *)arg;
(*kbdsw[kbd->kb_index]->intr)(kbd, NULL);
}
DRIVER_MODULE(atkbd, atkbdc, atkbd_driver, atkbd_devclass, 0, 0);